Next Article in Journal
Analysis by Mass Spectrometry of the Polar Lipids from the Cellular Membrane of Thermophilic Lactic Acid Bacteria
Previous Article in Journal
Formation of Complexes of Flavonoids and Metals. Determination of the Stoichiometry and Stability Constants
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Cerium (IV) Ammonium Nitrate (CAN) Catalyzed One-pot Synthesis of 2-Arylbenzothiazoles

by
Fawzia Al-Qalaf
1,
Ramadan Ahmed Mekheimer
2 and
Kamal Usef Sadek
2,*
1
Applied Science Department, College of Technological Sudies, Public Authority for Applied Education and Training, Safat 13060, Kuwait
2
Chemistry Department, Faculty of Science, El-Minia University, El-Minia 61519, A. R. Egypt
*
Author to whom correspondence should be addressed.
Molecules 2008, 13(11), 2908-2914; https://doi.org/10.3390/molecules13112908
Submission received: 23 September 2008 / Revised: 11 November 2008 / Accepted: 13 November 2008 / Published: 24 November 2008

Abstract

:
A one-pot synthesis of 2-arylbenzothiazoles from the reaction of 2-amino-thiophenol and aromatic aldehydes catalysed by cerium (IV) ammonium nitrate (CAN) is reported.

Introduction

2-Arylbenzothiazoles are a class of molecules which posses an interesting variety of biological activities [1,2,3]. They are a class of potent and selective antitumor agents which exhibit nanomolar inhibitory activity against a range of human breast, ovarian, colon and renal cell lines in vitro [4]. In addition, they represent one of the most promising antiamyloid therapies for treatment of a number of a heterogenous family of diseases referred to generically as amyloidosis, including Alzheimer’s disease (AD), type II diabetes, variant Creutzfeldt-Jakob disease, painful joints associated with long term hemodialysis and rare cases of hereditary insomnia [5,6].
In general, benzothiazoles are synthesized by condensation of 2-aminothiophenol with carboxylic acid derivatives [7], the base induced cyclization of the corresponding 2-haloanilides [8], or the radical cyclization of thioacylbenzanilides [9]. On the other hand, the most general synthetic approaches to 2-arylbenzothiazoles involve: (1) arylation of benzothiazole with aryl bromides at 150oC in a sealed tube catalyzed by Pd(OAc)2, Cs2CO3 and CuBr with P(t-Bu)3 as ligand [10], or Suziki biaryl coupling of 2‑bromobenzothiazole with aryl boronic acids [11]; (2) condensation of 2-aminothiophenols with carboxylic acids under microwave irradiation [12] or with polymer-bound esters in the presence of a Lewis acid [13]; (3) oxidative cyclization of phenolic Schiff’s bases derived from the condensation of 2-aminothiophenols and aldehydes using various oxidants such as Sc(OTf)3 using molecular oxygen[14], activated carbon [15], pyridinium chlorochromate [16] and very recently via electrooxidation [17]; recently [18] a modification of such strategy that involves flash vacuum pyrolysis and photolysis of 2-methylthio-N-(arenylidene)anilines has been reported; (4) direct condensation of 2-aminothiophenol with aromatic aldehydes under microwave irradiation [19]. However, most of these synthetic approaches suffer from drawbacks such as harsh reaction conditions (strong acids, high temperatures), lengthy procedures that consume excess reagents, expensive catalysts that may be harmful to the environment or a sophisticated techniques.
Cerium (IV) ammonium nitrate (CAN) is one of the most interesting oxidants in organic synthesis since it is stable in different solvents and is commercially available. The use of this reagent for numerous reactions involving C-S, C-N, C-Se and C-Cl bond formation has been reviewed [20,21,22]. In continuation of our work aiming at development of efficient and simple techniques for the synthesis of heterocycles [23,24], we reported herein a one-pot synthesis of 2-arylbenzothiazole from the reaction of 2-aminothiophenol 1 with aromatic aldehydes 2 catalyzed by CAN.

Results and Discussion

Reaction of equimolar amounts of 1 and 2 in methanol in the presence of CAN produces the corresponding 2-arylbenzothiazoles 4 in good yields (75-89%) via the intermediacy of Schiff’s bases 3.
Figure 1. One-pot synthesis of 2-arylbenzothiazoles 4a-h.
Figure 1. One-pot synthesis of 2-arylbenzothiazoles 4a-h.
Molecules 13 02908 g001
In order to investigate the optimum conditions for these reactions we first studied the efficacy of the ratio of the catalyst (2, 5, 10, 15 mol %) and our study revealed that 10 mol% of the catalyst was the optimium ratio. For 2 and 5 mol% of CAN, the yields decreased to 55-62% and 63-73%, respectively, whereas an increase in the quantity of CAN has no significant effect on the overall yield. In addition, methanol was the best solvent among those tested (H2O, acetone, CHCl3). Next we studied the effect of aromatic aldehyde substituent on the reaction rate and the overall yield. With both electron withdrawing and electron donating groups the reaction proceeds smoothly, with a slight increase in the yield when the aryl substituent was an electron withdrawing group. A mechanism to account for the formation of 4a-h is proposed in Figure 2. It is clearly obvious that CAN acts as both a Lewis acid and an oxidant.
Figure 2. A proposed mechanism for the formation of 4a-h.
Figure 2. A proposed mechanism for the formation of 4a-h.
Molecules 13 02908 g002

Conclusions

Cerium (IV) ammonium nitrate (CAN) has been employed for the first time as a mild and efficient reagent for the one-pot synthesis of 2-arylbenzothiazoles in high yields. The procedure proved to be simple either in conducting the reaction or isolation of the products and to the best of our knowledge it is one of the few reported direct one-pot synthesis of 2-arylbenzothiazoles from the reaction of 2-aminothiophenol with aromatic aldehydes and at ambient temperature.

Experimental

General

Melting points were determined on a Gallenkamp melting point apparatus and are uncorrected. Infrared spectra were measured with a Shimadzu Model 470 spectrophotometer. The NMR spectra were recorded on a Bruker AM 400 spectrometer with DMSO-d6 as solvent and TMS as internal reference, chemical shifts are expressed as δ ppm. Mass spectra were measured on a GCMS-QP1000EX mass spectrometer. Analytical data were determined on the Microanalytical Data Unit at Kuwait University. Analytical TLC was performed with silica gel plates using silica gel 60 PF254 (Merck).

Synthesis of 2-arylbenzothiazoles 4a-h

To a mixture of 1 (0.626 g, 5 mmol) and the appropriate aldehyde 2 (5 mmol) in methanol (10 mL) was added with stirring 10% mol of cerium (IV) ammonium nitrate (CAN). The reaction mixture was stirred at room temperature overnight. Brine solution was then added to the mixture and the solid formed was collected by filtration, dried and recrystallised from EtOH to afford compounds 4a-h.
2-Phenyl-1,3-benzothiazole (4a): Yield: 75%; m.p. 112-113˚C (Lit.25: 115-116oC); IR (ν max, KBr, cm‑1): 3060, 3018, 1609, 1585; 1H-NMR: δ 7.48 (t, J = 7.8 Hz, 1H, Ar-H), 7.54-7.60 (m, 4H, Ar-H), 8.07-8.12 (m, 3H, Ar-H), 8.16 (d, J = 7.8 Hz, 1H, Ar-H); MS m/z (rel. int. %) 211 (M+, 100); Anal. calcd. for C13H9NS: C, 73.90; H, 4.29; N, 6.63; S, 15.17. Found: C, 73.79; H, 4.19; N, 6.81; S, 14.98.
2-(4-Methoxyphenyl)-1,3-benzothiazole (4b): Yield: 78%; m.p.126-128˚C (Lit. [17]: 119-120oC); IR (ν max, KBr, cm-1): 3103, 3058, 1604, 1585; 1H-NMR: δ 3.86 (s, 3H, OCH3), 7.12 (d, J = 7.8 Hz, 2H, Ar-H), 7.43 (t, J = 7.8 Hz, 1H, Ar-H), 7.53 (t, J = 8.0 Hz, 1H, Ar-H), 8.01-8.10 (m, 3H, Ar-H), 8.11 (d, J = 7.6 Hz, 1H, Ar-H); MS m/z (rel. int. %) 241 (M+, 100); Anal. calcd. for C14H11NOS: C, 69.68; H, 4.59; N, 5.80; S, 13.29. Found: C, 69.55; H, 4.52; N, 5.94; S, 13.18.
2-(3,4-Dimethoxyphenyl)-1,3-benzothiazole (4c): Yield: 77%; m.p.130-132˚C; IR (ν max, KBr, cm-1): 3078, 3053, 2962, 2835, 1600; 1H-NMR: δ 3.85 (s, 3H, OCH3), 3.89 (s, 3H, OCH3), 7.11 (d, J = 8.4 Hz, 1H, Ar-H), 7.41 (t, J = 7.8 Hz, 1H, Ar-H), 7.53 (t, J = 7.8 Hz, 1H, Ar-H), 7.60-7.66 (m, 2H, 2Ar-H), 8.02-8.09 (m, 1H, Ar-H), 8.10 (d, J = 8.4 Hz, 1H, Ar-H); MS m/z (rel. int. %) 271 (M+, 100); Anal. calcd. for C15H13NO2S: C, 66.40; H, 4.83; N, 5.16; S, 11.82. Found: C, 66.33; H, 4.72; N, 5.22; S, 11.69.
2-(3-Nitrophenyl)-1,3-benzothiazole (4d): Yield: 88%; m.p. 184-186˚C (Lit. [16]: 181-183oC); IR (ν max, KBr, cm-1): 3080, 3033, 1612, 1577; 1H-NMR: δ 7.54 (t, J = 8.0 Hz, 1H, Ar-H), 7.60 (t, J = 8.0 Hz, 1H, Ar-H), 7.88 (t, J = 8.0 Hz, 1H, Ar-H), 8.16 (d, J = 8.0 Hz, 1H, Ar-H), 8.24 (d, J = 8.0 Hz, 1H, Ar-H), 8.41 (d, J = 8.0 Hz, 1H, Ar-H), 8.44 (d, J = 8.0 Hz, 1H, Ar-H), 8.84 (s, 1H, Ar-H); 13C-NMR: δC 111.8, 119.5, 120.3, 122.5, 126.3, 126.5, 130.2, 130.7, 133.3, 142.8, 149.4, 157.5, 161.9; MS m/z (rel. int. %) 256.0 (M+, 100); Anal. calcd. for C13H8N2O2S: C, 60.93; H, 3.15; N, 10.93; S, 12.51. Found: C, 60.86; H, 3.27; N, 11.02; S, 12.64.
2-(2-Chlorophenyl)-1,3-benzothiazole (4e): Yield: 89%; m.p. 71-73˚C (Lit. [16]: 71-73oC); IR (ν max, KBr, cm-1): 3050, 3035, 1559; 1H-NMR: δ 7.33-7.44 (m, 3H, Ar-H), 7.51-7.54 (m, 2H, Ar-H), 7.93 (d, J = 7.6 Hz, 1H, Ar-H), 8.12 (d, J = 8.0 Hz, 1H, Ar-H), 8.21-8.25 (m, 1H, Ar-H); 13C-NMR: δC 121.4, 123.6, 125.6, 126.4, 127.2, 130.9, 131.3, 131.9, 132.4, 132.8, 136.2, 152.6, 164.3; Anal. calcd. for C13H8ClNS: C, 63.54; H, 3.28; N, 5.70. Found: C, 63.45; H, 3.41; N, 5.76.
2-(2-Methoxyphenyl)-1,3-benzothiazole (4f): Yield 80%; m.p.102-103oC (Lit. [19]: 101-103oC); IR: (ν max, KBr, cm-1): 3105, 3050, 1605, 1588; 1H-NMR: δ 3.83 (s, 3H, OCH3); 7.03 (d, J= 7.8 Hz, 1H, Ar-H); 7.15 (t, J = 7.8 Hz, 1H, Ar-H); 7.40-7.53 (m, 2H, Ar-H), 7.68 (d, J = 7.8 Hz, 1H, Ar-H), 8.01 (d, J = 7.6 Hz, 1H, Ar-H); 8.18 (d, J = 7.8 Hz, 1H, Ar-H); MS m/z (rel. int. %) 241 (M+, 100); Anal. calcd. for C14H11NOS: C, 69.68; H, 4.59; N, 5.80; S, 13.29. Found: C, 69.52; H, 4.55; N, 5.93; S, 13.22.
2-(4-Nitrophenyl)-1,3-benzothiazole (4g): Yield 87%; m.p. 224-225oC (Lit. [17]: 224-226oC): IR (ν max, KBr, cm-1): 3082, 3035, 1615, 1580; 1H-NMR: δ 7.44-7.53 (m, 2H, Ar-H) ; 8.01 (d, J = 8.0 Hz, 1H, Ar-H); 8.10 (d, J = 8.0 Hz, 2H, Ar-H); 8.21 (d, J = 8.0 Hz, 1H, Ar-H); 8.32 (d, J = 8.0 Hz, 2H, Ar-H); MS m/z (rel. int. %) 256.0 (M+, 100); Anal. calcd. for C13H8N2O2S: C, 60.93; H, 3.15; N, 10.93; S, 12.51. Found: C, 60.88; H, 3.25; N, 11.05; S, 12.64.
2-Thienyl-1,3-benzothiazole (4h): Yield 79%; m.p. 97-99oC (Lit. [26]: 98-100oC): IR (ν max, KBr, cm‑1): 3080, 3040, 1620; 1H-NMR: δ 7.31 (t, J = 4.0 Hz, 1H, thiophene CH); 7.54-7.63 (m, 2H, Ar-H); 7.69 (d, J = 4.0 Hz, 1H, thiophene CH); 7.72 (d, J = 4.0 Hz, 1H, thiophene CH); 8.14 (d, J = 8.0 Hz, 1H, Ar-H), 8.22 (d, J = 8.0 Hz, 1H, Ar-H); MS m/z (rel. int. %) 217.0 (M+, 100); Anal. calcd. for C11H7NS2: C, 60.82; H, 3.22; N, 6.44; S, 29.52. Found: C, 60.73; H, 3.28; N, 6.62; S, 29.34.

Acknowledgments

This work was financed with the project fund [Kuwait, AAAET, TRANSFORM Grant TS-06-14] which was of great help in the achievement of this work.

References

  1. Xie, Y.; Deng, S.; Chen, Z.; Yan, S.; Landry, D. W. Identification of small-molecule inhibitors of the AB-ABAD interaction. Bioorg. Med. Chem. Lett. 2006, 16, 4657. [Google Scholar] [CrossRef]
  2. Hutchinson, I.; Chau, M. S.; Browne, H. L.; Trapani, V. Antitumor benzothiazoles 141. Synthesis and in vitro biological properties of fluorinated 2-(4-aminophenyl)benzothiazole. J. Med. Chem. 2001, 44, 1446. [Google Scholar] [CrossRef]
  3. Hutchinson, I.; Jennings, S.A.; Vishnuvajjala, B. R.; Westwell, A. D.; Stevens, M. F. G. Antitumor benzothiazole 161. Synthesis and pharmaceutical properties of antitumor 2-(4-aminophenyl) benzothiazole amino acid prodrugs. J. Med. Chem. 2002, 45, 744. [Google Scholar] [CrossRef]
  4. Kashiyama, E.; Hutchinson, I.; Chua, M.-S.; Stinson, S. F.; Phillipes, L. R.; Kaur, G.; Sausville, E. A.; Bradshaw, T. D.; Westwell, A. D.; Stevens, M. F. G. Antitumor benzothiazoles 8. Synthesis, metabolic and biological properties of the C- and N-oxidation products of antitumor 2-(4-aminophenyl)-benzothiazoles. J. Med. Chem. 1999, 42, 4172. [Google Scholar] [CrossRef]
  5. Mathis, C. A.; Bacski, B. J.; Kajdasz, S. T.; McLellan, M. E.; Frosch, M. P.; Hyman, B. T.; Holt, D. P.; Wany, Y.; Huany, G.-F.; Debnath, M. L.; Klunk, W. E. A lipophilic thioflavin-T derivatives for positron emission tomography (PET) imaging of amyloid brain. Bioorg. Med. Chem. Lett. 2002, 12, 295. [Google Scholar] [CrossRef]
  6. Mathis, C. A.; Wany, Y.; Holt, D. P.; Huany, G.-F.; Debnath, M. L.; Klunk, W. E. Synthesis and evaluation of 11C-labeled 6-substituted 2-arylbenzothiazoles as amyloid imaging agents. J. Med. Chem. 2003, 46, 2740. [Google Scholar] [CrossRef]
  7. Ben-Alloum, A.; Bakkas, S.; Soufiaoui, M. Nouvelle voie de synthese des 2-arythiazoles transfert d,electrons active par micro-cndes. Tetrahedron Lett. 1997, 38, 6395. [Google Scholar] [CrossRef]
  8. Roe, A.; Tuker, W. P. The preparation of some flourobenzothiazoles. J. Heterocycl. Chem. 1965, 2, 148. [Google Scholar] [CrossRef]
  9. Hutchinson, I.; Stevens, M. F. G.; Westwell, A. D. The regiospecific synthesis of 5- and 7-monosubstituted and 5,6-disubstituted 2- arylbenzothiazoles. Tetrahedron Lett. 2000, 41, 425. [Google Scholar] [CrossRef]
  10. Alagille, D.; Baldwin, R. M.; Tamagnan, G. D. One-step synthesis of 2-arylbenzo-thiazole (BTA) and benzoxazole precoursers for in vivo imaging of β-amyloid plaques. Tetrahedron Lett. 2005, 46, 1349. [Google Scholar] [CrossRef]
  11. Majo, V. J.; Prabhakaran, J.; Mann, J. J.; Kumar, J. S. D. An efficient palladium catalysed synthesis of 2-arylbenzothiazoles. Tetrahedron Lett. 2003, 44, 8535. [Google Scholar] [CrossRef]
  12. Chakraborti, A. K.; Selvam, C.; Kaur, G.; Bahagat, S. An efficient synthesis of benzothiazoles by direct condensation of carboxylic acids with 2-aminothiophenol under microwave irradiation. SynLett. 2004, 5, 851. [Google Scholar] [CrossRef]
  13. Mutsushita, H.; Lee, S. H.; Joung, M.; Clapham, B.; Janda, K. D. Smart cleavage reactions: the synthesis of benzoimidazoles and benzothiazoles from polymer-bound esters. Tetrahedron Lett. 2004, 45, 313. [Google Scholar]
  14. Itoh, T.; Nagata, K.; Ishikawa, H.; Ohsawa, A. synthesis of 2-arylbenzothiazoles and imidazoles using scandium triflate as a catalyst for both a ring closing and an oxidation step. Heterocycles 2004, 63, 2769. [Google Scholar] [CrossRef]
  15. Kawashita, Y.; Meba, C.; Hayashi, A. A simple synthesis of 2-arylbenzothiazoles and its application to palladium-catalyzed Mizoroki-Heck reaction. Tetrahedron Lett. 2006, 47, 4231. [Google Scholar] [CrossRef]
  16. Praveen, C.; Kumar, K. H.; Muralidharan, D.; Perumal, P. T. Oxidative cyclization of thio-phenolic Schiff ,s bases promoted by PCC: A new oxidant for 2-substituted benzothiazoles and benzoxazoles. Tetrahedron 2008, 64, 2369. [Google Scholar] [CrossRef]
  17. Okimoto, M.; Yoshida, T.; Hoshi, M.; Hattori, K.; Komata, M.; Tomozawa, K.; Chiba, T. Electrooxidative cyclization of benzylideneaminothiophenols to the corresponding 2-arylbenzo- thiazoles. Heterocycles 2008, 75, 35. [Google Scholar] [CrossRef]
  18. Chou, C.-H.; Yu, P.-C.; Wang, B.-C. Synthesis of 2-arylbenzothiazoles from flash vacuum pyrolysis and photolysis of 2-methylthio-N-(arenylidene) anilines. Tetrahedron Lett. 2008, 49, 4145. [Google Scholar] [CrossRef]
  19. Chanada, M.; Arup, D. A green method for the synthesis of 2-arylbenzothiazoles. Heterocycles 2007, 71, 1837. [Google Scholar] [CrossRef]
  20. Roy, S. C.; Guin, C.; Rana, K. K.; Maiti, G. Ceric ammonium nitrate mediated selective bromo-alkylation of activated cinnamyl compounds using lithium bromide. Synlett. 2001, 226. [Google Scholar]
  21. Roy, S. C.; Banerjee, B. A mild and efficient method for the chemoselective synthesis of acylals from aldehydes and their deprotections catalysed by ceric ammonium nitrate. Synlett. 2002, 1677. [Google Scholar]
  22. Nair, V.; Panicker, S. B.; Nair, L. G.; George, T. G.; Augustine, A. Carbon-heteroatom bond-forming reactions mediated by cerium (IV) ammonium nitrate: an overview. Synlett. 2003, 156. [Google Scholar]
  23. Mekheimer, R. A.; Abdel-Hameed, A.; Sadek, K. U. Solar thermochemical reactions: four component synthesis of polyhydroquinoline derivatives induced by solar thermal reactions. Green Chem. 2008, 10, 592. [Google Scholar] [CrossRef]
  24. Mekheimer, R. A.; Ameen, M. A.; Sadek, K. U. Solar thermochemical reactions II: synthesis of 2-aminothiophenes via Gewald reaction induced by solar thermal energy. Chinese Chem. Lett. 2008, 19, 788. [Google Scholar] [CrossRef]
  25. Mu, X. G.; Zou, J. P.; Zeng, R. S.; Wu, J. C. Mn (III)-promoted cyclization of substituted thio-formanilides under microwave irradiation: a new reagent for 2-substituted benzothiazoles. Tetrahedron Lett. 2005, 46, 4345. [Google Scholar] [CrossRef]
  26. George, B.; Papadopoulos, E. P. Heterocycles from N-ethoxycarbonylthioamides and dinucleo- philic reagents. 2. Five-membered rings containing two heteroatoms at 1,3-positions. J. Org. Chem. 1977, 42, 411. [Google Scholar]
  • Sample Availability: Contact the author.

Share and Cite

MDPI and ACS Style

Al-Qalaf, F.; Mekheimer, R.A.; Sadek, K.U. Cerium (IV) Ammonium Nitrate (CAN) Catalyzed One-pot Synthesis of 2-Arylbenzothiazoles. Molecules 2008, 13, 2908-2914. https://doi.org/10.3390/molecules13112908

AMA Style

Al-Qalaf F, Mekheimer RA, Sadek KU. Cerium (IV) Ammonium Nitrate (CAN) Catalyzed One-pot Synthesis of 2-Arylbenzothiazoles. Molecules. 2008; 13(11):2908-2914. https://doi.org/10.3390/molecules13112908

Chicago/Turabian Style

Al-Qalaf, Fawzia, Ramadan Ahmed Mekheimer, and Kamal Usef Sadek. 2008. "Cerium (IV) Ammonium Nitrate (CAN) Catalyzed One-pot Synthesis of 2-Arylbenzothiazoles" Molecules 13, no. 11: 2908-2914. https://doi.org/10.3390/molecules13112908

APA Style

Al-Qalaf, F., Mekheimer, R. A., & Sadek, K. U. (2008). Cerium (IV) Ammonium Nitrate (CAN) Catalyzed One-pot Synthesis of 2-Arylbenzothiazoles. Molecules, 13(11), 2908-2914. https://doi.org/10.3390/molecules13112908

Article Metrics

Back to TopTop