Next Article in Journal
The Epitranscriptomic Mechanism of Metal Toxicity and Carcinogenesis
Next Article in Special Issue
The Lattice Model of Particles with Orientation-Dependent Interactions at Solid Surfaces: Wetting Scenarios
Previous Article in Journal
Docking and Molecular Dynamics-Based Identification of Interaction between Various Beta-Amyloid Isoforms and RAGE Receptor
Previous Article in Special Issue
Theoretical Study of the Exciton Binding Energy and Exciton Absorption in Different Hyperbolic-Type Quantum Wells under Applied Electric, Magnetic, and Intense Laser Fields
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
IJMS
Volume 23
Issue 19
10.3390/ijms231911828
ijms-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Towards Sustainable Carbon Return from Waste to Industry via C2-Type Molecular Unit

by
Konstantin S. Rodygin
1,
Kristina A. Lotsman
1,
Dmitriy E. Samoylenko
1,
Viktor M. Kuznetsov
1 and
Valentine P. Ananikov
1,2,*
1
Institute of Chemistry, Saint Petersburg State University, Universitetskiy pr. 26, 198504 Saint Petersburg, Russia
2
N. D. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Leninsky pr. 47, 119991 Moscow, Russia
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2022, 23(19), 11828; https://doi.org/10.3390/ijms231911828
Submission received: 6 September 2022 / Revised: 22 September 2022 / Accepted: 29 September 2022 / Published: 5 October 2022
(This article belongs to the Collection Feature Papers in 'Physical Chemistry and Chemical Physics')
Browse Figures
Versions Notes

Abstract

:
A general possibility of a sustainable cycle for carbon return to high-value-added products is discussed by turning wastes into acetylene. Pyrolyzed solid municipal wastes, pyrolyzed used cationic exchangers, and other waste carbon sources were studied in view of the design of a sustainable cycle for producing calcium carbide and acetylene. The yields of calcium carbide from carbon wastes were as high as those from industrial fossil raw materials (coke, charcoal, etc.). Conversion of carbon-containing wastes to calcium carbide provides an excellent opportunity to make acetylene, which is directly compatible with modern industry. Overall, the process returns carbon-containing wastes back to sustainable cycles to produce high-value-added products involving only C2-type molecules (calcium carbide and acetylene). Calcium carbide may be stored and transported, and on-demand acetylene generation is easy to realize. Upon incorporation into the waste processing route, calcium carbide may be an efficient carbon reservoir for quick industrial uptake.

Graphical Abstract

1. Introduction

Waste recycling involving thermochemical treatment is a universal approach and an important component of a circular economy [1,2,3,4]. Pyrolysis is an efficient way of waste recycling, allowing the recovery of valuable feedstock from waste [5,6]. The key advantage of pyrolysis [7] and thermochemical methods [8] is their versatility and applicability to various types of processed materials, including mixtures of these materials. For example, a wide variety of plastics can be successfully processed individually or in mixtures. The importance of this area recalls urgent strategies for further usage of pyrolyzed products. Indeed, considering the amount of waste processed, a massive amount of carbon can be potentially produced by pyrolysis [9,10].
Efficient use of carbon is one of the major challenges in the circular economy [11,12,13,14,15,16]. The end-of-life of used materials is accompanied by certain carbon losses in the form of waste. Conventional incineration [17] of waste results in carbon dioxide emissions (approximately 1 ton of CO2 per 1 ton of waste) ruining the carbon neutral cycle.
In fact, mined fossil carbon is transformed into consumption products followed by unpreventable carbon wastes (Figure 1A). Of course, many options are now considered for developing approaches that can be used to move towards the circular economy [18,19,20,21,22,23,24]. Regeneration of carbon after using consumption products should return carbon, decreasing disposal areas and reducing the required amount of fossil carbon (Figure 1B). Pyrolysis is a promising approach for carbon waste revalorization [25,26] and sustainable chemistry [27]. After pyrolysis, elemental carbon can be easily retrieved to form a solid black powder [28]. The challenging point is the development of a platform for converting regenerated carbon from waste into industrially valuable products with the possibility of reaching an overall carbon-neutral cycle [29]. Calcium carbide can be considered an opportunity to return carbon back and close the carbon cycle.
Hydrolysis of calcium carbide results in gaseous acetylene, which can be easily integrated into industrial processes, providing a wide range of valuable chemicals [30,31,32,33,34]. In addition to the well-established large-scale manufacturing of acetylene, carbide is also used directly, skipping gaseous acetylene, in many fundamental processes [35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51]. Currently, calcium carbide is a valuable product of the chemical industry and is produced from natural limestone and fossil carbon [52,53,54,55,56,57,58]. The initial reagents in the manufacturing of carbide remained the same until, in 2010, Zhang and co-authors presented a powerful approach based on biochars [59], which were obtained by pyrolysis of biomass and successfully used instead of mined carbon.
Considering carbon recycling opportunities, municipal solid waste (MSW) is one of the rich carbon sources of organically bound carbon produced each year in large amounts [60,61,62]. However, MSW recycling is accompanied by many challenges due to the layering and often heterogeneity of this type of waste [18]. Synthesis of calcium carbide from returned carbon from waste is a conceptually new approach developed here.
In this work, we developed a new approach using the product of pyrolysis as a starting source in the synthesis of calcium carbide instead of mined carbon. Pyrolyzed MSW, industrial waste and biomass sources and other carbonaceous materials (CMs) were used in carbide synthesis. As a co-reagent, calcium carbonate and calcium metal were used. The synthesis occurred inside a thermogravimetric apparatus in a special crucible. The yield of carbide was calculated according to the TG curves. Then, the same CMs were heated in a quartz tube with Ca metal to obtain carbide on a gram scale. According to the studied processes, waste carbon was used to produce CaC2 and acetylene and successfully employed for the synthesis of vinyl ethers—valuable monomers. To the best of our knowledge, for the first time, we discuss such a sustainable calcium carbide cycle with high carbon efficiency.

2. Results and Discussion

2.1. Concept of a Sustainable Ca Cycle Using Carbon-to-Acetylene Transformation

Converting carbon to acetylene is a useful process since a large variety of chemicals can be further obtained from acetylene using existing technologies. Calcium carbide is a powerful option for acetylene storage and on-demand generation upon a simple reaction with water:
CaC2 + 2H2O = Ca(OH)2 + C2H2
Importantly, calcium hydroxide can be reused to produce calcium carbide again. In principle, a closed loop on calcium can be maintained (Figure 2). Pyrolysis of wastes to obtain carbon and synthesis of calcium carbide constitute another loop for the overall carbon to acetylene conversion (Figure 2, blue circle). By combining these two cycles, a certain amount of carbon can be kept in use without the need for fossil carbon mining and avoiding the negative scenario of increased carbon dioxide emissions. As a general idea, the possibility of a sustainable cycle can be considered using the combination of two closed loops (Figure 2).

2.2. Calcium Carbide Synthesis: Electric Arc at 2100 °C vs. Oven at 1500 °C

Industrial carbide manufacturing technology is based on electrodes that supply power to the furnace. In the mixture, heat transfer is significantly hindered [57,63,64], and considering the high enthalpy of carbide formation according to the equation, the process is carried out at high temperatures up to 2100–2200 °C to melt supplied portions of reagents immediately and reduce the reaction time. The decomposition of carbide at high temperatures is compensated by the fast rate of smelting and sufficient heating of outlying zones of the reaction mixture [65]. In total, the yield can reach 85% as a result of the optimized process.
When the reaction occurs inside a TG apparatus with facilitated heat transfer, milligrams of previously calcinated and fractionated reagents are usually used. This technique is a convenient approach for a comparative study of various carbon sources. However, the reaction itself should also be studied in larger quantities under regular conditions.
Here, we tested the reaction both in a TG spectrometer and in a regular quartz tube. The former process occurred in a ZrO2 crucible covered with a platinum cap. The latter reaction was carried out on a gram scale inside a vacuum oven at 1100 °C.

2.3. Carbon Content

Carbon content is an essential indicator of the quality of the initial carbonaceous raw materials. Obviously, the yield of calcium carbide depends on the available elemental carbon amount in the raw material. Note that carbon can be present in a sample both as elemental carbon and as a part of a compound. If a sample already contains elemental carbon or a compound that decomposes to form elemental carbon, the carbon will react with CaO. Otherwise, if carbon is bound in organic molecules, it may be unavailable for the synthesis of calcium carbide or the reaction efficiency would be much lower.
Therefore, before the synthesis of carbide, the available carbon was determined by heating each sample from 0 °C up to 1680 °C in a ZrO2 crucible inside a TG apparatus under a He-atmosphere to detect weight loss. The upper-temperature limit was chosen to be related to the temperature of carbide synthesis. We also continued heating to check for further changes and, finally, stopped the curves at 1680 °C since no changes were detected. The carbon content was analyzed for the standard source—industrial coke; commercially available highly pure carbonaceous materials, such as carbon nanotubes (NT), nanoglobular carbon (NG), and carbon fiber (CF); residues after the pyrolysis of cation exchangers CE1 and CE2; MSW; humins (synthesized according to the literature procedure) [66] and microcrystalline cellulose (MCC) (Figure 3). NG and NT consisted almost entirely of carbon because their weight remained unchanged when heating. Mined coke usually used for the synthesis of carbide lost approximately 10% of its weight, presumably as a result of the decomposition of residual amounts of organic compounds. One of the selected standards, carbon fiber, showed a low carbon content (77.4%), which is most likely due to the incomplete decomposition of residual organic polymers during the previous treatment. To our surprise, one of the pyrolysis products of the cation exchange resin (CE2) lost only 13% in weight, approaching coke at this value. For another cation exchanger (CE1), the carbon content was lower (45.4%). A similar value was obtained for MSW (38%), which makes both materials promising for the synthesis of carbides. The lowest values were detected for humins (12.3%) and cellulose (15%). Both compounds are rich in carbon but the carbon is found in volatile organic or polymeric forms, resulting in low residual mass.
Thus, commercially available NG, NT, and coke were the best initial carbon sources in carbide synthesis. The high carbon content in MSW and CE2 is also promising, and all the sources were tested in the synthesis of calcium carbide inside a TG crucible. Humins were not chosen as a carbon source in carbide synthesis in TGA due to having the lowest carbon content (12.3%).
Then, the samples were burned under an oxygen atmosphere to determine the inorganic residue (see Supplementary Materials). The content of available elemental carbon was corrected and calculated as the difference between the residue after heating under an inert atmosphere and the residue under an oxygen atmosphere. All the experiments and calculations of loadings during the synthesis of calcium carbide were carried out related to the corrected residual amount.

2.4. Synthesis of Calcium Carbide in a TG Crucible

Graphite and calcium carbonate were chosen as standard reagents for the synthesis of calcium carbide. First, we varied the conditions of the synthesis (see Supplementary Materials). Then, under optimized conditions, different carbonaceous materials were tested in carbide synthesis. Calcium carbonate is completely decomposed upon reaching 1000 °C to carbon dioxide and calcium oxide, which further react with elemental carbon. Detailed optimization was previously carried out (molar ratios, reaction time, temperature) [59], and after checking the optimal conditions using calcium carbonate (see Supplementary Materials), all carbonaceous materials were tested in calcium carbide synthesis (Figure 4).
The reaction profiles were similar in each case. The first zone of weight loss was observed at 600–800 °C and corresponded to calcium carbonate decomposition with CO2 evolution (33% weight loss). Calcium carbonate decomposed completely in all cases in the same way (Equation (1)); some variations in weight loss were possible due to additional pyrolysis processes of carbonaceous materials (Figure 3). The second reaction corresponded to calcium carbide formation with CO evolution (Equation (2)) at 1500–1680 °C (NT, NG and CF—20%; and coke—16% weight loss). The reaction time depended on the temperature and heating rate and the process was terminated after completing the weight loss.
CaCO 3   → 600 − 800   ° C   CaO + CO 2 ( Δ m ( CO 2 ) )
CaO + 3 C   → 1500 − 1680   ° C   CaC 2 + CO   ( Δ m ( CO ) )
Next, we tested carbonaceous materials as a carbon source in the reaction with calcium carbonate (Figure 5). Of course, the weight loss was lower in the CO zone for MCC and cation exchangers; however, the carbon content was much lower in those materials, therefore increasing the loading would lead to better results. Moreover, the weight loss in the case of MSW was similar to that of commercial materials (15%), therefore this result was very promising.
To calculate the yield of calcium carbide, the mass of CO released should be calculated since the formation of calcium carbide accompanied the release of only one volatile component (carbon oxide). Thus, the mass of CO released is an appropriate value related to the carbide amount (2). Furthermore, weight loss in the CO zone and carbide yield will be calculated. The total weight loss Δm(total) is a complicated value consisting of weight loss due to pyrolysis (Δm(pyr)), CO2 weight loss (Δm(CO2, total)) due to decomposition of calcium carbonate, and CO weight loss due to carbide formation (Δm(CO, total)) (3).
Δm(total) = Δm(pyr) + Δm(CO2, total) + Δm(CO, total)
CO2 release starts and finishes at lower temperatures than carbide formation; thus, weight loss in the CO2 zone should be neglected.
At the same time, a part of a loaded CM was not pyrolyzed, and the inactive residue was determined after burning a sample of a CM under an oxygen atmosphere (designated inorganic residue); therefore, CM consists of a burned part and an inorganic residue (4).
m(CM, loaded) = m(burned residue) + m(inorg. residue)
The pyrolyzed part can be calculated from the pyrolysis (m(CM, pyrolyzed)) and the part that reacted with CaO (C to CaC2) should be calculated according to (5) and (6).
m(C to CaC2) = m(C, loaded) − m(C, pyr) − m(inorg. residue)
m(C, pyr) = m(CM, loaded) × Δm(pyr)
Next, m(CO from CaC2) can be calculated according to Figure 4 and Figure 5.
m(CO from CaC2) = m(loaded) × Δm(CO, total) − m(CM, loaded) × Δm(pyr, CO zone)
Then, comparing the CO mass from the reaction with the theoretical value and considering the purity (carbon amount) of the carbonaceous materials, the yield of calcium carbide can be calculated (Table 1; detailed Table S1 is in Supplementary Materials).
As expected, the yields of calcium carbide from commercial sources were very high (97–99%). Cation exchangers show moderate results (27 and 24%), considering the high carbon content. However, the exchangers were presented as small solid balls and were hard to grind. Indeed, grinding is fundamentally important for the reaction, therefore we assume that with dedicated industrial grinding, the carbide yield can be significantly improved. MSW was used as a fine powder and showed excellent results (99%). The yield of carbide derived from MCC was moderate (54%); however, the reaction is of academic interest only due to the very low carbon content available for the reaction in the initial carbonaceous material.
The purity of the carbide was confirmed by means of gas chromatography using a column based on molecular sieves for acetylene detection. The synthesized powders were mixed with water in a vial and an aliquot of the gas was injected into a chromatograph (no other gases were detected during the analysis).

2.5. Gram-Scale Synthesis of Calcium Carbide

The synthesis of carbides in a TG apparatus is a convenient technique for a mechanistic study. Uniform rapid heating of a reaction mixture ensures the high performance of the reaction. However, these conditions are difficult to achieve in real synthesis on a larger scale. In addition, the mass of the resulting carbide in a TG analyzer was very small (several milligrams): this amount is not enough for a complete investigation and even isolated yield determination, and during the transfer of such amounts, the synthesized carbide is rapidly hydrolyzed.
Therefore, the reaction with the tested carbonaceous materials (Table S2) in gram quantities was also evaluated. The reaction involving calcium metal with carbonaceous materials was selected since no CO gas evolution takes place and no carbon is lost during the reaction. In this work, there is no discussion or call for replacing the standard method of calcium carbide manufacturing from lime and coke with a method from calcium metal. Of course, calcium metal is more expensive than lime and even the desired carbide. This method of obtaining carbide (from calcium and carbon) was used in this work only as a test and verification of the presence (and content) of carbon in carbonaceous materials since it is not possible to implement gram synthesis according to the classical scheme at 2200 °C in the laboratory.
Pieces of calcium metal 2–4 mm in size were mixed with the carbonaceous materials in a 1.1:2.0 ratio. The reaction of CaC2 preparation occurred in a vacuum oven in quartz glass at 1100 °C for an hour (Scheme 1). The oven was cooled after the process under an argon atmosphere. No optimization was performed since this reaction is fundamentally different and this work is a separate investigation (in progress in our lab).
Determination of the content of calcium carbide in the final product (the yield) is a challenging task due to the volatile nature of acetylene. In the case of a standard volumetric approach, the accuracy of measurements may be very low. Transfer of carbide from a reaction vessel is accompanied by hydrolysis. Therefore, the yields were determined according to the nucleophilic addition to acetylene (i.e., thiovinylation). Thiovinylation, as a special case of vinylation, provides quantitate yields in the case of some thiols and completely converts gaseous acetylene into the corresponding thiovinyl ethers (Scheme 1, see also Supplementary Materials and reference [35] for more information), which can be easily detected by NMR. Dodecanethiol was selected as a model thiol for this reaction.
The selected commercial carbide sample showed 75% calcium carbide purity in the chemical. After that, the reaction with the same thiol was carried out by varying the thiol/carbide ratio, and the final thiol/vinyl ether ratio was determined according to the 1H NMR spectrum. As a result, a calibration curve was created (see Supplementary Materials). The tested CM-derived carbides were studied under the same conditions, so the determination of the purities was precise enough due to the same conditions. The best result was obtained with pure commercial graphite (89%) since the content and purity of available carbon were the highest. Very promising results were obtained with CE2 (54%); moreover, using MSW as a carbon source in the synthesis of carbide is also possible (37% yield). The other CE1 showed a poor purity of 23%.
Comparing the yields of carbides obtained by different methods, it can be concluded that the yield of carbide depends on the amount of available carbon in a CM. Since the reactions for carbide synthesis are completely different (the first originates from a CM and calcium carbonate, and the second one is from a CM and calcium metal), different CMs provided various yields. When the reaction mixture is heated, residual organic impurities decompose, and the carbide yield depends on the carbon content in the mixture at a current temperature. In the case of MCC, the temperature of 1100 °C is insufficient to decompose the carbon-containing compounds, and the existing carbon-containing compounds decompose at a higher temperature, which gives a yield upon reaction with calcium oxide. At the same time, the decomposition of calcium carbonate produces carbon dioxide, which can react with carbon-containing compounds in the mixture, thereby reducing the yield. Either the formed calcium oxide can block some compounds due to an alkaline nature or by reacting and converting the required carbon into refractory components.

3. Materials and Methods

Materials. Calcium carbonate, calcium carbide (granulated, technical), potassium hydroxide, calcium metal, dodecanethiol, DMSO were supplied by Sigma-Aldrich and used as received without any further purification. Potassium fluoride was received from a local company Vecton and was ground and dried at 170 °C for 24 h.
Synthesis of Calcium Carbide in the TG Apparatus (Netzsch). A mixture of a carbonaceous material and calcium carbonate was placed in a crucible and placed in the apparatus. After heating, the mixture was kept under dry atmosphere and used in further experiments.
Synthesis of Calcium Carbide in an Oven. Each mixture of calcium metal and carbonaceous material in appropriate ratio was loaded into a quartz tube and placed into a vacuum oven. The oven was heated to 1100 °C for an hour. After the reaction, the oven was cooled to room temperature and the residue was placed in a sealed vial and then used.
Volumetric Investigations. A round-bottom flask equipped with a pressure-compensated dropping funnel and an outlet was charged with 25 mg of commercial CaC2. A dropping funnel was filled with 25 mL of water and sealed with a stopper. A silicone hose was connected to the outlet of the flask, the end of which was placed underwater in an inverted 10 mL measuring cylinder completely filled with water. Then, while stirring, an excess of water (10 mL) was added dropwise to the flask, while acetylene was quickly released, the excess of which went through a hose into a graduated cylinder, which was used to determine the volume of evolved gas.
Characterization Methods. NMR spectra were recorded using Bruker 400 MHz NMR spectrometer WB Avance III (Germany). Deuterated solvents (chloroform-d and DMSO-d6) were purchased from Cambridge Isotope Laboratories, Inc., UK. Chloroform-d was previously passed through a column with Al2O3 to remove the traces of the acid and stored under molecular sieves.
Chromatographic Identifications. A sample of commercially available calcium carbide (1 mg or less) was placed into a vial (1.8 mL). Using a syringe, a drop of water was injected into a vial. After the reaction, a sample of gas in vial was taken in a gas syringe and injected into a “Kristall” gas-chromatograph. A peak of acetylene was identified. The same procedure was carried out with synthesized calcium carbide samples using new gas syringe each time. The retention time of acetylene peak was the same as in the case of using commercially available calcium carbide. Note, gas syringe after dosing should be kept open during night. Every determination must be started with a blank sample of air to check the residual amounts of acetylene gas in a syringe.

4. Conclusions

A series of carbonaceous materials were tested as a carbon source in the synthesis of calcium carbide according to a common procedure. The sustainable potential for carbon reuse was studied for MSW and cation exchangers. Excellent yields were obtained in the reaction of MSW with calcium carbonate towards the formation of calcium carbide (99%).
Practical applications should be considered taking into account that pyrolysis is applicable to revalorize various types of waste. However, black carbon-containing powder obtained after pyrolysis is currently often disposed of. We found that this residue can be successfully utilized as a carbon source in the synthesis of calcium carbide. Turning carbon wastes into acetylene is a promising general opportunity to achieve a sustainable carbon cycle (Figure 2).
Overall, we believe that the sustainable potential of calcium carbide should be rethought and that the conversion of carbon-containing wastes to acetylene may be a useful route.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/ijms231911828/s1.

Author Contributions

Conceptualization, V.P.A. and K.S.R.; methodology, K.S.R. and V.P.A.; validation, K.A.L.; formal analysis, K.A.L.; investigation, D.E.S.; resources, D.E.S.; data curation, K.A.L. and V.M.K.; writing—original draft preparation, K.S.R., K.A.L., D.E.S., V.P.A.; writing—review and editing, K.S.R., K.A.L., V.P.A.; visualization, D.E.S. and K.A.L.; supervision, V.P.A.; project administration, V.P.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by RSF, grant number 21-73-20003.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Acknowledgments

The authors thank the Resource Centers at St. Petersburg State University (Pure ID: 92285019 for sample preparation and analytics). The analytical studies were performed in SPbU research centers: Magnetic Resonance, Chemical Analysis and Materials, and Thermogravimetric and Calorimetric. The authors also thank V.A. Golikov for the generous loan of the carbonaceous materials CE and MSW. K.S.R. personally thanks M.V. Chislov for the valuable discussion.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Smieja, J.M.; Babcock, K.E. The intersection of green chemistry and Steelcase’s path to circular economy. Green Chem. Lett. Rev. 2017, 10, 331–335. [Google Scholar] [CrossRef] [Green Version]
  2. Linder, M. Ripe for disruption: Reimagining the role of green chemistry in a circular economy. Green Chem. Lett. Rev. 2017, 10, 428–435. [Google Scholar] [CrossRef] [Green Version]
  3. Lakshmidevi, J.; Ramesh Naidu, B.; Avula, S.K.; Majhi, A.; Chia, P.W.; Al-Harrasi, A.; Venkateswarlu, K. A waste valorization strategy for the synthesis of phenols from (hetero)arylboronic acids using pomegranate peel ash extract. Green Chem. Lett. Rev. 2022, 15, 426–435. [Google Scholar] [CrossRef]
  4. Magagula, L.P.; Masemola, C.M.; Ballim, M.A.; Tetana, Z.N.; Moloto, N.; Linganiso, E.C. Lignocellulosic Biomass Waste-Derived Cellulose Nanocrystals and Carbon Nanomaterials: A Review. Int. J. Mol. Sci. 2022, 23, 4310. [Google Scholar] [CrossRef]
  5. Nomanbhay, S.; Hussein, R.; Ong, M.Y. Sustainability of biodiesel production in Malaysia by production of bio-oil from crude glycerol using microwave pyrolysis: A review. Green Chem. Lett. Rev. 2018, 11, 135–157. [Google Scholar] [CrossRef]
  6. Alvarez-Gallego, C.J.; Fdez-Güelfo, L.A.; Romero Aguilar, M.d.l.A.; Romero García, L.I. Thermochemical Pretreatments of Organic Fraction of Municipal Solid Waste from a Mechanical-Biological Treatment Plant. Int. J. Mol. Sci. 2015, 16, 3769–3782. [Google Scholar] [CrossRef] [Green Version]
  7. Elkhalifa, S.; Mariyam, S.; Mackey, H.R.; Al-Ansari, T.; McKay, G.; Parthasarathy, P. Pyrolysis Valorization of Vegetable Wastes: Thermal, Kinetic, Thermodynamics, and Pyrogas Analyses. Energies 2022, 15, 6277. [Google Scholar] [CrossRef]
  8. Jha, S.; Nanda, S.; Acharya, B.; Dalai, A.K. A Review of Thermochemical Conversion of Waste Biomass to Biofuels. Energies 2022, 15, 6352. [Google Scholar] [CrossRef]
  9. Sato, K.; Yamamoto, A.; Dyballa, M.; Hunger, M. Molecular adsorption by biochar produced by eco-friendly low-temperature carbonization investigated using graphene structural reconfigurations. Green Chem. Lett. Rev. 2022, 15, 287–295. [Google Scholar] [CrossRef]
  10. John, K.I.; Omorogie, M.O. Biomass-based hydrothermal carbons for catalysis and environmental cleanup: A review. Green Chem. Lett. Rev. 2022, 15, 162–186. [Google Scholar] [CrossRef]
  11. Stahel, W.R. The circular economy. Nature 2016, 531, 435–438. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  12. Korhonen, J.; Honkasalo, A.; Seppälä, J. Circular Economy: The Concept and its Limitations. Ecol. Econ. 2018, 143, 37–46. [Google Scholar] [CrossRef]
  13. Geissdoerfer, M.; Savaget, P.; Bocken, N.M.P.; Hultink, E.J. The Circular Economy—A new sustainability paradigm? J. Clean. Prod. 2017, 143, 757–768. [Google Scholar] [CrossRef] [Green Version]
  14. Ghisellini, P.; Cialani, C.; Ulgiati, S. A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems. J. Clean. Prod. 2016, 114, 11–32. [Google Scholar] [CrossRef]
  15. Kirchherr, J.; Reike, D.; Hekkert, M. Conceptualizing the circular economy: An analysis of 114 definitions. Resour. Conserv. Recycl. 2017, 127, 221–232. [Google Scholar] [CrossRef]
  16. Barra, A.; Nunes, C.; Ruiz-Hitzky, E.; Ferreira, P. Green Carbon Nanostructures for Functional Composite Materials. Int. J. Mol. Sci. 2022, 23, 1848. [Google Scholar] [CrossRef]
  17. Abis, M.; Bruno, M.; Kuchta, K.; Simon, F.-G.; Grönholm, R.; Hoppe, M.; Fiore, S. Assessment of the Synergy between Recycling and Thermal Treatments in Municipal Solid Waste Management in Europe. Energies 2020, 13, 6412. [Google Scholar] [CrossRef]
  18. Zhao, X.; Korey, M.; Li, K.; Copenhaver, K.; Tekinalp, H.; Celik, S.; Kalaitzidou, K.; Ruan, R.; Ragauskas, A.J.; Ozcan, S. Plastic waste upcycling toward a circular economy. Chem. Eng. J. 2022, 428, 131928. [Google Scholar] [CrossRef]
  19. Zhang, X.; Liu, Y. Circular economy is game-changing municipal wastewater treatment technology towards energy and carbon neutrality. Chem. Eng. J. 2022, 429, 132114. [Google Scholar] [CrossRef]
  20. Andersen, M.S. An introductory note on the environmental economics of the circular economy. Sustainability Sci. 2007, 2, 133–140. [Google Scholar] [CrossRef]
  21. Peters, G.P.; Weber, C.L.; Guan, D.; Hubacek, K. China’s Growing CO2 EmissionsA Race between Increasing Consumption and Efficiency Gains. Environ. Sci. Technol. 2007, 41, 5939–5944. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  22. Lieder, M.; Rashid, A. Towards circular economy implementation: A comprehensive review in context of manufacturing industry. J. Clean. Prod. 2016, 115, 36–51. [Google Scholar] [CrossRef]
  23. Blomsma, F.; Brennan, G. The Emergence of Circular Economy: A New Framing Around Prolonging Resource Productivity. J. Ind. Ecol. 2017, 21, 603–614. [Google Scholar] [CrossRef] [Green Version]
  24. Kalmykova, Y.; Sadagopan, M.; Rosado, L. Circular economy—From review of theories and practices to development of implementation tools. Resour. Conserv. Recycl. 2018, 135, 190–201. [Google Scholar] [CrossRef]
  25. Pichon, A. A promising pyrolysis. Nat. Chem. 2012, 4, 68–69. [Google Scholar] [CrossRef]
  26. Qureshi, M.S.; Oasmaa, A.; Pihkola, H.; Deviatkin, I.; Tenhunen, A.; Mannila, J.; Minkkinen, H.; Pohjakallio, M.; Laine-Ylijoki, J. Pyrolysis of plastic waste: Opportunities and challenges. J. Anal. Appl. Pyrolysis 2020, 152, 104804. [Google Scholar] [CrossRef]
  27. Metlyaeva, S.A.; Rodygin, K.S.; Lotsman, K.A.; Samoylenko, D.E.; Ananikov, V.P. Biomass- and calcium carbide-based recyclable polymers. Green Chem. 2021, 23, 2487–2495. [Google Scholar] [CrossRef]
  28. Zhang, S.; Jiang, S.-F.; Huang, B.-C.; Shen, X.-C.; Chen, W.-J.; Zhou, T.-P.; Cheng, H.-Y.; Cheng, B.-H.; Wu, C.-Z.; Li, W.-W.; et al. Sustainable production of value-added carbon nanomaterials from biomass pyrolysis. Nature Sust. 2020, 3, 753–760. [Google Scholar] [CrossRef]
  29. Martínez, J.D.; Cardona-Uribe, N.; Murillo, R.; García, T.; López, J.M. Carbon black recovery from waste tire pyrolysis by demineralization: Production and application in rubber compounding. Waste Manag. 2019, 85, 574–584. [Google Scholar] [CrossRef] [Green Version]
  30. Schobert, H. Production of Acetylene and Acetylene-based Chemicals from Coal. Chem. Rev. 2014, 114, 1743–1760. [Google Scholar] [CrossRef]
  31. Trotuş, I.-T.; Zimmermann, T.; Schüth, F. Catalytic Reactions of Acetylene: A Feedstock for the Chemical Industry Revisited. Chem. Rev. 2014, 114, 1761–1782. [Google Scholar] [CrossRef] [PubMed]
  32. Brand, J.P.; Waser, J. Electrophilic alkynylation: The dark side of acetylene chemistry. Chem. Soc. Rev. 2012, 41, 4165–4179. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  33. Trofimov, B.A.; Schmidt, E.Y. Acetylenes in the Superbase-Promoted Assembly of Carbocycles and Heterocycles. Acc. Chem. Res. 2018, 51, 1117–1130. [Google Scholar] [CrossRef]
  34. Trofimov, B.A.; Gusarova, N.K. Acetylene: New prospects of classical reactions. Russ. Chem. Rev. 2007, 76, 507–527. [Google Scholar] [CrossRef]
  35. Rodygin, K.S.; Ananikov, V.P. An efficient metal-free pathway to vinyl thioesters with calcium carbide as the acetylene source. Green Chem. 2016, 18, 482–486. [Google Scholar] [CrossRef]
  36. Gao, L.; Li, Z. Synthesis of Aromatic Terminal Allenes and Aliphatic Terminal Alkynes from Hydrazones Using Calcium Carbide as an Acetylene Source. Org. Chem. Front. 2020, 7, 702–708. [Google Scholar] [CrossRef]
  37. Lu, H.; Li, Z. Palladium-Catalyzed One-Pot Four-Component Synthesis of β-Cyano-α,β-unsaturated Ketones Using Calcium Carbide as an Acetylene Source and Potassium Hexacyanoferrate(II) as an Eco-Friendly Cyanide Source. Adv. Synth. Catal. 2019, 361, 4474–4482. [Google Scholar] [CrossRef]
  38. Hosseini, A.; Schreiner, P.R. Synthesis of Exclusively 4-Substituted β-Lactams through the Kinugasa Reaction Utilizing Calcium Carbide. Org. Lett. 2019, 21, 3746–3749. [Google Scholar] [CrossRef]
  39. Turberg, M.; Ardila-Fierro, K.J.; Bolm, C.; Hernández, J.G. Altering Copper-Catalyzed A3 Couplings by Mechanochemistry: One-Pot Synthesis of 1,4-Diamino-2-butynes from Aldehydes, Amines, and Calcium Carbide. Angew. Chem. Int. Ed. 2018, 57, 10718–10722. [Google Scholar] [CrossRef]
  40. Lu, H.; Li, Z. Synthesis of 1,2,3-Triazolyl-Based Ketoximes Using Calcium Carbide as an Acetylene Source. Eur. J. Org. Chem. 2020, 2020, 845–851. [Google Scholar] [CrossRef]
  41. Yang, P.-W.; Liu, X.-X.; Li, X.-Q.; Wei, M.-X. Transition metal-free and solvent-free calcium carbide promotes the formation of β-keto sulfoxide from acyl chloride and DMSO. Org. Chem. Front. 2021, 8, 2914–2918. [Google Scholar] [CrossRef]
  42. Liu, Z.; Li, Z. Synthesis of 1,3-Diynes Using Calcium Carbide as an Alkyne Source. Eur. J. Org. Chem. 2021, 2021, 302–308. [Google Scholar] [CrossRef]
  43. Ma, X.; Li, Z. Synthesis of Diarylethynes from Aryldiazonium Salts by Using Calcium Carbide as an Alkyne Source in a Deep Eutectic Solvent. Synlett 2021, 32, 631–635. [Google Scholar]
  44. Fu, R.; Lu, Y.; Yue, G.; Wu, D.; Xu, L.; Song, H.; Cao, C.; Yu, X.; Zong, Y. Direct Synthesis of 3-Coumaranones with Calcium Carbide as an Acetylene Source. Org. Lett. 2021, 23, 3141–3145. [Google Scholar] [CrossRef] [PubMed]
  45. Rodygin, K.S.; Samoylenko, D.E.; Seitkalieva, M.M.; Lotsman, K.A.; Metlyaeva, S.A.; Ananikov, V.P. Generation, regeneration, and recovery of Cu catalytic system by changing the polarity of electrodes. Green Chem. 2022, 24, 1132–1140. [Google Scholar] [CrossRef]
  46. Lebedev, A.N.; Rodygin, K.S.; Mironenko, R.M.; Saybulina, E.R.; Ananikov, V.P. Metal-Catalyzed Chemical Activation of Calcium Carbide: New Way to Hierarchical Metal/Alloy-on-Carbon Catalysts. J. Catal. 2022, 407, 281–289. [Google Scholar] [CrossRef]
  47. Rodygin, K.S.; Ledovskaya, M.S.; Voronin, V.V.; Lotsman, K.A.; Ananikov, V.P. Calcium Carbide: Versatile Synthetic Applications, Green Methodology and Sustainability. Eur. J. Org. Chem. 2021, 2021, 43–52. [Google Scholar] [CrossRef]
  48. Voronin, V.V.; Ledovskaya, M.S.; Rodygin, K.S.; Ananikov, V.P. Examining the vinyl moiety as a protecting group for hydroxyl (-OH) functionality under basic conditions. Org. Chem. Front. 2020, 7, 1334–1342. [Google Scholar] [CrossRef]
  49. Rodygin, K.S.; Lotsman, K.A.; Ananikov, V.P. Calcium Carbide Looping System for Acetaldehyde Manufacturing from Virtually any Carbon Source. ChemSusChem 2020, 13, 3679–3685. [Google Scholar] [CrossRef]
  50. Rodygin, K.S.; Bogachenkov, A.S.; Ananikov, V.P. Vinylation of a Secondary Amine Core with Calcium Carbide for Efficient Post-Modification and Access to Polymeric Materials. Molecules 2018, 23, 648. [Google Scholar] [CrossRef] [Green Version]
  51. Hosseini, A.; Schreiner, P.R. Direct Exploitation of the Ethynyl Moiety in Calcium Carbide Through Sealed Ball Milling. Eur. J. Org. Chem. 2020, 2020, 4339–4346. [Google Scholar] [CrossRef]
  52. Morehead, J.T.; de Chalmot, G. The Manufacture of Calcium Carbide. J. Am. Chem. Soc. 1896, 18, 311–331. [Google Scholar] [CrossRef] [Green Version]
  53. Li, M.; Chen, S.; Dai, H.; Zhao, H.; Jiang, B. Experimental Investigation on the Mass Diffusion Behaviors of Calcium Oxide and Carbon in the Solid-State Synthesis of Calcium Carbide by Microwave Heating. Molecules 2021, 26, 2568. [Google Scholar] [CrossRef] [PubMed]
  54. Wang, R.; Liu, Z.; Ji, L.; Guo, X.; Lin, X.; Wu, J.; Liu, Q. Reaction kinetics of CaC2 formation from powder and compressed feeds. Front. Chem. Sci. Eng. 2016, 10, 517–525. [Google Scholar] [CrossRef]
  55. Gong, X.-z.; Zhang, J.-q.; Wang, Z.; Wang, D.; Liu, J.-h.; Jing, X.-d.; Qian, G.-y.; Wang, C. Development of calcium coke for CaC2 production using calcium carbide slag and coking coal. Int. J. Miner. Metall. Mater. 2021, 28, 76–87. [Google Scholar] [CrossRef]
  56. Xiong, W.; Chen, X.; Wang, Q.; Gao, M.; Zheng, D.; Mai, Y.; Hu, W. Heterogeneous Phases Reaction Equilibrium in an Oxy-Thermal Carbide Furnace. ChemEngineering 2020, 4, 2. [Google Scholar] [CrossRef] [Green Version]
  57. Xu, Q.; Li, Y.; Deng, S.; He, Y.-L.; Li, L.; Yu, H. Modeling of Multiprocess Behavior for Feedstock-Mixed Porous Pellet: Heat and Mass Transfer, Chemical Reaction, and Phase Change. ACS Sust. Chem. Eng. 2019, 7, 12510–12519. [Google Scholar] [CrossRef]
  58. Li, Z.; Liu, Z.; Wang, R.; Guo, X.; Liu, Q. Conversion of bio-char to CaC2 at low temperatures-morphology and kinetics. Chem. Eng. Sci. 2018, 192, 516–525. [Google Scholar] [CrossRef]
  59. Li, G.; Liu, Q.; Liu, Z.; Zhang, Z.C.; Li, C.; Wu, W. Production of Calcium Carbide from Fine Biochars. Angew. Chem. Int. Ed. 2010, 49, 8480–8483. [Google Scholar] [CrossRef]
  60. Venkata, M.S.; Nikhil, G.N.; Chiranjeevi, P.; Reddy, N.C.; Rohit, M.V.; Kumar, A.N.; Sarkar, O. Waste biorefinery models towards sustainable circular bioeconomy: Critical review and future perspectives. Bioresour. Technol. 2016, 215, 2–12. [Google Scholar] [CrossRef]
  61. Aghbashlo, M.; Tabatabaei, M.; Soltanian, S.; Ghanavati, H.; Dadak, A. Comprehensive exergoeconomic analysis of a municipal solid waste digestion plant equipped with a biogas genset. Waste Manag. 2019, 87, 485–498. [Google Scholar] [CrossRef] [PubMed]
  62. Miezah, K.; Obiri-Danso, K.; Kádár, Z.; Fei-Baffoe, B.; Mensah, M.Y. Municipal solid waste characterization and quantification as a measure towards effective waste management in Ghana. Waste Manag. 2015, 46, 15–27. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  63. Li, R.; Ma, S.; Ma, H.; Liu, S.; Wang, H. Numerical simulation of heat transfer and chemical reaction of CaO-C porous pellets in the reaction layer of calcium carbide furnace. Appl. Therm. Eng. 2020, 181, 115877. [Google Scholar] [CrossRef]
  64. Zhang, X.-K.; Tong, Z.-X.; He, Y.-L.; Hu, X. Influence of feed architecture on heat and mass transfer in calcium carbide electric furnace. Int. J. Heat Mass Transf. 2021, 164, 120593. [Google Scholar] [CrossRef]
  65. Ji, L.; Liu, Q.; Liu, Z. Thermodynamic Analysis of Calcium Carbide Production. Ind. Eng. Chem. Res. 2014, 53, 2537–2543. [Google Scholar] [CrossRef]
  66. Chernysheva, D.V.; Chus, Y.A.; Klushin, V.A.; Lastovina, T.A.; Pudova, L.S.; Smirnova, N.V.; Kravchenko, O.A.; Chernyshev, V.M.; Ananikov, V.P. Cover Feature: Sustainable Utilization of Biomass Refinery Wastes for Accessing Activated Carbons and Supercapacitor Electrode Materials. ChemSusChem 2018, 11, 3544. [Google Scholar] [CrossRef]
Ijms 23 11828 g001 550
Figure 1. Carbon losses in the current route of fossil utilization (A, red arrows) and possible improvement via the regeneration of carbon described in this article (B, green arrows).
Figure 1. Carbon losses in the current route of fossil utilization (A, red arrows) and possible improvement via the regeneration of carbon described in this article (B, green arrows).
Ijms 23 11828 g001
Ijms 23 11828 g002 550
Figure 2. Closing loops for sustainable carbon recirculation.
Figure 2. Closing loops for sustainable carbon recirculation.
Ijms 23 11828 g002
Ijms 23 11828 g003 550
Figure 3. Weight loss in the selected samples according to TGA (m, %) and applied temperature program; notations of carbon materials: nanoglobular carbon and nanotubes, 98.5%; coke, 90.6%; CE2, 87%; carbon fiber, 77.4%; CE1, 45.4%; MSW, 38%; microcrystalline cellulose, 15%; humins, 12.3%.
Figure 3. Weight loss in the selected samples according to TGA (m, %) and applied temperature program; notations of carbon materials: nanoglobular carbon and nanotubes, 98.5%; coke, 90.6%; CE2, 87%; carbon fiber, 77.4%; CE1, 45.4%; MSW, 38%; microcrystalline cellulose, 15%; humins, 12.3%.
Ijms 23 11828 g003
Ijms 23 11828 g004 550
Figure 4. Weight loss in calcium carbide synthesis from commercial carbon sources: nanoglobules, coke, carbon fiber, and nanotubes according to TGA (m, %).
Figure 4. Weight loss in calcium carbide synthesis from commercial carbon sources: nanoglobules, coke, carbon fiber, and nanotubes according to TGA (m, %).
Ijms 23 11828 g004
Ijms 23 11828 g005 550
Figure 5. Weight loss in calcium carbide synthesis from waste materials: microcrystalline cellulose, cation exchangers, and municipal solid wastes.
Figure 5. Weight loss in calcium carbide synthesis from waste materials: microcrystalline cellulose, cation exchangers, and municipal solid wastes.
Ijms 23 11828 g005
Ijms 23 11828 sch001 550
Scheme 1. Synthesis of thiovinyl ether from calcium carbide.
Scheme 1. Synthesis of thiovinyl ether from calcium carbide.
Ijms 23 11828 sch001
Table
Table 1. Calcium carbide yield data in TGA.
Table 1. Calcium carbide yield data in TGA.
CMC, % aΔm(CO,total), % (mg) bΔm(pyr,CO zone), % (mg) cm(CO), mg dYield, % e
CF67.919.6 (1.80)9.8 (0.28)1.5199
NT98.020.2 (1.50)2.0 (0.04)1.4697
Coke66.415.8 (1.69)4.8 (0.15)1.5499
NG98.020.0 (1.71)0.5 (0.01)1.7098
CE140.46.7 (0.64)6.3 (0.27)0.3727
CE286.26.0 (0.53)4.5 (0.12)0.4124
MSW28.515.0 (1.62)9.0 (0.47)1.1499
MCC12.76.1 (0.74)3.7 (0.31)0.4454
a Reactive carbon content, determined according to pyrolysis, burning in an oxygen atmosphere, and inorganic residue determination. b Total weight loss as a result of CO emission. The first values are from Figure 4 and Figure 5 and the second in brackets are calculated from the loadings (see Supplementary Materials). c Weight loss in the CO zone as a result of pyrolysis. The first values are from Figure 3 and the second values in brackets are calculated from the loadings (see Supplementary Materials). d The real masses of CO released, calculated according to (7). The theoretical values are listed in Supplementary Materials. e The yields of calcium carbide considering the carbon content in carbonaceous materials according to burning and pyrolysis data.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Rodygin, K.S.; Lotsman, K.A.; Samoylenko, D.E.; Kuznetsov, V.M.; Ananikov, V.P. Towards Sustainable Carbon Return from Waste to Industry via C2-Type Molecular Unit. Int. J. Mol. Sci. 2022, 23, 11828. https://doi.org/10.3390/ijms231911828

AMA Style

Rodygin KS, Lotsman KA, Samoylenko DE, Kuznetsov VM, Ananikov VP. Towards Sustainable Carbon Return from Waste to Industry via C2-Type Molecular Unit. International Journal of Molecular Sciences. 2022; 23(19):11828. https://doi.org/10.3390/ijms231911828

Chicago/Turabian Style

Rodygin, Konstantin S., Kristina A. Lotsman, Dmitriy E. Samoylenko, Viktor M. Kuznetsov, and Valentine P. Ananikov. 2022. "Towards Sustainable Carbon Return from Waste to Industry via C2-Type Molecular Unit" International Journal of Molecular Sciences 23, no. 19: 11828. https://doi.org/10.3390/ijms231911828

APA Style

Rodygin, K. S., Lotsman, K. A., Samoylenko, D. E., Kuznetsov, V. M., & Ananikov, V. P. (2022). Towards Sustainable Carbon Return from Waste to Industry via C2-Type Molecular Unit. International Journal of Molecular Sciences, 23(19), 11828. https://doi.org/10.3390/ijms231911828

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop