Next Article in Journal
Impact of Basalt Filler on Thermal and Mechanical Properties, as Well as Fire Hazard, of Silicone Rubber Composites, Including Ceramizable Composites
Next Article in Special Issue
Electrorheological Characteristics of Poly(diphenylamine)/magnetite Composite-Based Suspension
Previous Article in Journal
Process Optimization for Compression Molding of Carbon Fiber–Reinforced Thermosetting Polymer
Previous Article in Special Issue
Probing Slip Differential Heat of Magnetorheological Fluids Subjected to Shear Mode Operation and Its Effect on the Structure
 
 
Article
Peer-Review Record

Quasi-Static Rheological Properties of Lithium-Based Magnetorheological Grease under Large Deformation

Materials 2019, 12(15), 2431; https://doi.org/10.3390/ma12152431
by Huixing Wang 1,2, Guang Zhang 1 and Jiong Wang 1,*
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Materials 2019, 12(15), 2431; https://doi.org/10.3390/ma12152431
Submission received: 4 July 2019 / Revised: 26 July 2019 / Accepted: 29 July 2019 / Published: 30 July 2019

Round 1

Reviewer 1 Report

Overall, the manuscript presented testing methodology for identifying correlation between carbonyl iron concentration and chain strength in MR grease. This subject and MR grease in general is of particular interest to the reviewer, having worked primarily with MR Fluid and had hands on experience with the shortcomings of the fluid form (e.g., leaks).


The reviewer's first comment is to have the grammar and spelling errors cleaned up throughout the paper. Often the reviewer found interpretation of text and reading between the lines were required to understand material.


The next comment applies to the Figure 9 and Figure 10. The reviewer is curious to know if the sharp change in strain indicated by dotted blue lines is indicative of a data acquisition/processing artifact. 


In general, the paper is well constructed and the results support the conclusion. The conclusion would be made stronger if future recommendations or planned future work was added. Surely, this study won't be the last as the intro implies the intent is to eventually use MR grease for engineering applications.

Author Response

Please see the attachment

Author Response File: Author Response.docx

Reviewer 2 Report

The manuscript investigates a lithium-based magnetorheological grease (MRG), analyzing the quasi-static rheological properties.

In the reviewer's opinion, the paper is well written and technically sound.

Some minor comments are here reported:

- It is suggested to add  in section 2.1 a picture of the MR grease sample, used in the tests;

- Since the performance of the MRG could be affected by the operation time, at the end of Section 3 ("Result and discussion"), it is suggested to add a new subsection in which the authors could investigate the performance of the MRG, when the cyclic shear signal is applied for a long time  (for example ten minutes or more), without the temperature control.


Author Response

Please see the attachment

Author Response File: Author Response.docx

Back to TopTop