Next Article in Journal
Nitric Oxide-Releasing Platforms for Treating Cardiovascular Disease
Next Article in Special Issue
Aqueous Prostaglandin Eye Drop Formulations
Previous Article in Journal
Nanotechnology-Based siRNA Delivery Systems to Overcome Tumor Immune Evasion in Cancer Immunotherapy
Previous Article in Special Issue
Mucoadhesive PLGA Nanospheres and Nanocapsules for Lactoferrin Controlled Ocular Delivery
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification

1
Eye Center, The Second Affiliated Hospital, School of Medicine, Zhejiang University, Hangzhou 310058, China
2
Jiande Branch, The Second Affiliated Hospital, School of Medicine, Zhejiang University, Hangzhou 310058, China
*
Author to whom correspondence should be addressed.
These authors contributed equally to this work.
Pharmaceutics 2022, 14(7), 1343; https://doi.org/10.3390/pharmaceutics14071343
Submission received: 15 May 2022 / Revised: 12 June 2022 / Accepted: 23 June 2022 / Published: 25 June 2022
(This article belongs to the Special Issue Ophthalmic Drug Delivery, 2nd Edition)

Abstract

:
Posterior capsular opacification (PCO) is the most common complication resulting from cataract surgery and limits the long-term postoperative visual outcome. Using Nd:YAG laser-assisted posterior capsulotomy for the clinical treatment of symptomatic PCO increases the risks of complications, such as glaucoma, retinal diseases, uveitis, and intraocular lens (IOL) pitting. Therefore, finding how to prevent PCO development is the subject of active investigations. As a replacement organ, the IOL is implanted into the lens capsule after cataract surgery, but it is also associated with the occurrence of PCO. Using IOL as a medium for PCO prophylaxis is a more facile and efficient method that has demonstrated various clinical application prospects. Thus, scientists have conducted a lot of research on new intraocular lens fabrication methods, such as optimizing IOL materials and design, and IOL surface modification (including plasma/ultraviolet/ozone treatment, chemical grafting, drug loading, coating modification, and layer-by-layer self-assembly methods). This paper summarizes the research progress for different types of intraocular lenses prepared by different surface modifications, including anti-biofouling IOLs, enhanced-adhesion IOLs, micro-patterned IOLs, photothermal IOLs, photodynamic IOLs, and drug-loading IOLs. These modified intraocular lenses inhibit PCO development by reducing the residual intraoperative lens epithelial cells or by regulating the cellular behavior of lens epithelial cells. In the future, more works are needed to improve the biosecurity and therapeutic efficacy of these modified IOLs.

1. Introduction

Cataracts, the leading cause of blindness globally, is a disease that results in color changes or opacification of a transparent ocular lens and leads to a series of visual defects [1]. Nowadays, researchers consider cataract lens removal surgery combined with intraocular lens (IOL) implantation as the only effective treatment for vision-limiting cataracts [2,3]. Although cataract phacoemulsification surgery is mature, post-surgical complications, such as posterior capsular opacification (PCO), limit the long-term postoperative visual outcomes [4]. PCO incidence ranges from 20% to 40% within five years after cataract surgery in adults, while in children, the incidence is as high as 100% [5,6]. Using Nd:YAG laser-assisted posterior capsulotomy, the clinical management of symptomatic PCO, may lead to several risks, such as glaucoma, retinal diseases, uveitis, and intraocular lens (IOL) pitting [7,8,9]. Therefore, PCO prevention is still the subject of active investigation.

1.1. Pathophysiology of PCO

The lens sits behind the iris inside the eye and is attached to the ciliary body through zonules [10] (Figure 1a). Histologically, it is composed of the lens capsule (including the anterior capsule, the equatorial region, the acellular posterior capsule), fibers, and single-layer lens epithelium [1]. Lens fibers are transformed from the lens epithelium and compacted from the periphery to the center. Thus, older lens fibers make up the core (nucleus) of the lens, and newly formed lens fibers make up the outer layer of the lens, the cortex (Figure 1b).
The pathophysiology of PCO is still not fully elucidated. Through the surgery of the extracapsular cataract extraction (including the phacoemulsification surgery), the nucleus and cortex were removed, and the lens capsule retains for the IOL implantation [2,3]. Despite the initial success of cataract surgery, there are always residual lens epithelial cells (LECs), as well as the postoperative inflammation, in the capsular bag (Figure 1c). Since cataract surgery initiates a wound-healing response, these living LECs start to proliferate and migrate over all available surfaces, including regions below or outer of the anterior capsule; IOL surfaces; and of primary importance the previously acellular posterior capsule, ultimately encroaching on the visual axis [4,5]. Furthermore, LECs undergo transdifferentiation into myofibroblasts and the process of epithelial–mesenchymal transformation (EMT). In addition, aberrant differentiation is considered to result in swollen globular cells, shown as the structure of Elschnig’s pearls. Additionally, the structure of Soemmerring’s ring is formed by lens fiber differentiation in the peripheral capsular bag (outside the IOLs). Thus, matrix deposition, capsular wrinkling, increased cell aggregation, and Elschnig’s pearls collectively cause significant visual disruption [11]. Moreover, changes in growth factors (such as transforming growth factor, fibroblast growth factor, epidermal growth factor, and insulin-like growth factor), cell adhesion molecules (such as intracellular adhesion molecule-1, various integrin ligands, and CD44), extracellular matrix (ECM) components (such as fibronectin, vitronectin, and collagen), other signaling molecules, and signal pathways play a critical role in regulating residual LEC functions and behaviors [5].

1.2. The Role of IOLs in PCO Prevention

According to the pathogenesis of PCO, the current research on PCO prevention has focused on reducing the residue of LECs or regulating their cellular behaviors. The cellular behaviors of LECs and the development of PCO are closely related to IOL biocompatibility. Amon et al. [12] have proposed for the first time that the IOL biocompatibility can be divided into the uveal and capsular biocompatibility. The uveal biocompatibility refers to the foreign body inflammatory response of uveal tissue to the IOL. The disruption of the blood–aqueous humor barrier during cataract surgery causes the influx of proteins and cells into the anterior chamber and their adhesion to the IOL surface. This protein adhesion plays a dramatic role in accumulating other cells, and the inflammatory cells convert into macrophages and giant cells, inducing a foreign body response. Capsular biocompatibility mainly refers to the opacification of the anterior and posterior capsule because of the proliferation and migration of LECs or the growth of LECs on the anterior surface of the IOL [13].
The IOL biocompatibility is influenced by several factors, including the IOL material, the optical edge design, and surface properties [14]. A more hydrophilic IOL surface is generally considered for better uveal biocompatibility, while a more hydrophobic IOL surface means better capsular biocompatibility [14]. The hydrophilic IOL surface reduces the adhesion of proteins and cells, which results in an alleviated postoperative inflammatory response, but it provides a suitable interface for the proliferation and migration of LECs. Numerous studies have demonstrated that constructing the hydrophilic anti-biofouling coatings on the IOL surface could reduce PCO incidence by inhibiting the adhesion, proliferation, or migration of LECs on the IOL surface [15,16,17,18]. Conversely, PCO has also been regarded as a unique form of an inflammatory response in which inflammatory cells (such as macrophages and giant cells) secrete cytokines and, in turn, regulate cellular behaviors of LECs, leading to severe PCO [13,19,20]. Therefore, the uveal and capsular biocompatibility of the IOL is not separate but closely related properties, and the effect of IOL surface hydrophobicity on PCO formation should also be treated critically. Improving the IOL biocompatibility through surface modification is a potential method for PCO prevention [14,21].
As the replacement organ is directly implanted in the eye, the IOL can serve as a medium to reduce postoperative residual LECs or regulate their behaviors through physical or biochemical means. This is a more facile and efficient method with clinical application prospects for PCO prophylaxis. For example, the IOL can be a drug delivery device that delivers anti-inflammatory, cytotoxic, and antiproliferative drugs that prevent PCO. This has the advantage of improving drugs and prolonging the time of action of drugs [22,23]. A significant benefit of drug-loaded IOLs is ensuring continuous drug delivery, better drug bioavailability, and patient compliance.
In addition to optimizing cataract surgery techniques and the intraoperative irrigation of drug solution in the capsule, scientists have conducted lots of research on using the intraocular lens to prevent PCO formation. They have focused on optimizing the IOL materials, design, and modifying surface properties (such as plasma/ultraviolet/ozone treatment, chemical grafting, drug loading, layer-by-layer self-assembly methods, and coating modification) [22,23,24,25].
This article mainly places greater focus on the different intraocular lenses prepared by IOL surface modification for PCO prevention, including anti-biofouling IOLs, enhanced-adhesion IOLs, micro-patterned IOLs, photothermal IOLs, photodynamic IOLs, and drug-loading IOLs. We summarize their brief mechanisms for PCO prevention in Figure 2.

2. The Main Types of IOLs Used for PCO Prophylaxis

2.1. Anti-Biofouling IOLs

Biofouling means the undesired adsorption and adhesion of biomolecules, cells, or microorganisms, and the formation of microbial films on material surfaces [26]. Since these biofouling components would induce inflammatory responses and potentially cause infection and/or immunologic rejection, the property of anti-biofouling is significantly relevant to the durability and security of medical applications, for example, medical implants, contact lenses, catheters, hemodialyzers, biosensors, and respirators [26,27,28,29]. Antifouling polymers or coatings modified onto these medical devices change their surface characteristics and thus improve biocompatibility and the performance in resisting biofouling.
The fabrication of anti-biofouling IOLs aims to alleviate the inflammatory response and decrease the LEC number on the IOL surface. This is performed by reducing the adhesion of proteins, bacteria, and cells, resulting in the inhibition of PCO formation. Previous studies have induced hydrophilic groups into IOL surfaces, such as heparin, vinyl pyrrolidone, and α-allyl glucoside, and enhanced the anti-biofouling and anti-inflammation ability of IOLs [21]. Nevertheless, in a clinical trial, heparin-surface-modified (HSM) hydrophilic acrylic IOLs and hydrophobic acrylic IOLs were implanted in cataract patients for 12 months of investigation [30]. In the uncomplicated cataract patients, the respective PCO areas and PCO severity scores were 6.12% and 0.081 in the HSM IOLs group and 5.91% and 0.075 in the control group, respectively. There was no statistically significant difference in the PCO area or the PCO severity score between the two IOLs, demonstrating no superiority of HSM IOLs in preventing PCO. Thus, these anti-fouling IOLs require more investigation to improve the PCO prevention effect before the final clinical application. The reviewed literature of anti-fouling IOLs for PCO prophylaxis with in vivo results is summarized in Table 1.
Poly(ethylene glycol) (PEG), a neutral and hydrophilic polymer with low PEG–water interface energy and no immunogenicity, is a commonly used anti-biofouling material. Lee et al. [31] applied PEG molecules for the surface modification of acrylic IOL with a square edge design. The PEG-IOLs were implanted in the rabbit models and found to reduce PCO severity at 36 weeks significantly. Scanning electron microscopy showed more LECs tightly adhered to the IOL surface without PEG modification. However, PEG-IOLs did not substantially inhibit PCO formation after seven weeks. Xu et al. [32] immobilized the hydrophilic PEG onto the IOL surface via a plasma-aided chemical grafting procedure without influencing the optical properties. This PEG-modified IOL had good biocompatibility in the rabbit model and exerted a PCO inhibition effect for more than four months. Subsequently, the research group fabricated the hydrophilic poly(poly(ethylene glycol) methacrylate) (PPEGMA) brush on the IOL surface using reversible addition fragmentation chain-transfer (RAFT) technology, which was an even more stable modification of the PEG. The anti-biofouling coating was sufficient to inhibit LEC adhesion and proliferation on the IOL, thereby reducing the incidence of PCO [17].
The compound 2-Methacryloyloxyethyl Phosphorylcholine (MPC) is an amphoteric material with excellent hydrophilicity, biocompatibility, and a specific bionic structure that provides the artificial cell membrane interface. These features allow for various applications in biological implants, tissue engineering, and drug delivery systems [33]. MPC forms a membrane-like structure and traps water molecules on the acrylic or silicone IOL, resulting in significantly improved surface hydrophilicity and anti-adhesion of proteins, cells, and bacteria [34,35,36].
Han et al. [37] prepared amphoteric MPC brushes on the surface of IOL acrylic acid by the bottom-up grafting method, and this alleviated the PCO severity after implanting MPC-modified IOL into rabbit eyes. Similarly, Tan et al. [38] synthesized the hydrophilic copolymer P (MPC-MAA) from the negatively charged hydrophilic methyl acrylic acid (MAA) and MPC, and they covalently grafted the copolymer onto the hydrophobic acrylic IOL surface after ammonia plasma treatment. However, the MPC-MAA modification could inhibit postoperative inflammation and anterior capsular opacification (ACO) rather than PCO. In another study, a polymer containing the amphoteric betaine group was used by Wang et al. [39] for surface modification because of its good biocompatibility, lubricity, and anti-biofouling properties in the hydration state. The hydrophilic poly(sulfobethine methacrylate) (PSBRMA) brush coating was prepared on the IOL using the RAFT method. This decreased LEC adhesion and proliferation in vitro and significantly reduced the turbidity of the posterior capsule in vivo.
The natural polysaccharide is extensively used in the surface modification of biomaterials, such as hyaluronic acid (HA) and chitosan (CHI). HA is a negatively-charged polysaccharide, naturally existing in the vitreous body, joint, and skin. However, CHI is the only cationic natural polysaccharide [40,41]. Considering the advantages of the hydration property of polysaccharides, Lin et al. [42] constructed a hydrogel-like polyelectrolyte multilayer coating composed of HA and CHI components on the surface of the silicone IOL using the electrostatic layer-by-layer (LBL) self-assembly method. The anti-biofouling coating of HA/CHI inhibited LEC adhesion and proliferation. For the in vivo experiments, modified IOLs prevented the central PCO (3 mm diameter), but the severity of peripheral PCO and Soemmerring’s ring was not significantly different between the control and modified IOL groups.
The modified IOLs mentioned above were rarely resistant to biofouling while maintaining tight contact with the posterior capsule. Thus, Wu et al. [43] fabricated a new type of IOL with a hydrophobic anti-biofouling coating (Figure 3). After functionalizing the nanomorphology of the hydrophobic IOL surface and covalently conjugating it with a “liquid-like” polydimethylsiloxane brush, the resulting (NT + LLL)-IOL exhibited strong resistance to biological fouling, including proteins, cells, and bacteria, because of the low surface energy of the modified surface. The hydrophobic surface of the (NT + LLL)-IOL had a better attachment to the posterior capsule, thus preventing residual LEC migration. Therefore, the (NT + LLL)-IOL implantation alleviated the intraocular inflammation response postoperatively and PCO formation. Despite having a liquid-like layered coating, the (NT + LLL)-IOL still had advantages of optical transparency, good biocompatibility, and mechanical robustness.
Table 1. Summary of reviewed literature of anti-biofouling IOLs for PCO prophylaxis with in vivo results.
Table 1. Summary of reviewed literature of anti-biofouling IOLs for PCO prophylaxis with in vivo results.
CompositionMain Fabrication MethodIOL TypeObservationProphylaxis EffectRef.
PEGoxygen plasma-aided activation and grafting polymerizationacrylic IOL
(SA60AT, Alcon)
eight weeks
in rabbit model
alleviate PCO formation for six weeks, but had no effect afterwards[31]
PPEGMAoxygen and argon plasma-aided activation and grafting polymerizationacrylic IOL
(SN60WF, Alcon)
four months
in rabbit model
alleviate PCO formation [32]
PPEGMAoxygen plasma-aided activation and RAFT grafting polymerizationacrylic IOL
(SN60WF, Alcon)
six months
in rabbit model
alleviate PCO formation[17]
MPCRAFT grafting polymerizationacrylic IOL
(SN60WF, Alcon)
one month
in rabbit model
alleviate PCO formation[37]
MPC/MAAammonia plasma-aided activation and grafting
polymerization
acrylic IOL
(Eyegood Medical Tech.)
eight weeks
in rabbit model
alleviate anterior capsular opacification formation, but did not alleviate PCO formation[38]
PSBMARAFT grafting polymerizationacrylic IOL
(66Vision Tech.)
six months
in rabbit model
alleviate PCO formation[39]
HA/CHIlayer-by-layer assembly acrylic IOL
(Alcon)
one month
in rabbit model
alleviate CPCO formation not PPCO [42]
PDMSoxygen plasma-aided activation and chemical vapor depositionacrylic IOL
(Eyebright Medical Tech.)
two months
in rabbit model
alleviate PCO formation[43]

2.2. Enhanced-Adhesion IOLs

According to the “sandwich” theory proposed by Linnola et al. [44,45,46,47], the IOL surface with biological adhesion properties allows the LECs to adhere to the IOL, forming the three-tier structure of the IOL, monolayer LECs, and posterior capsule membrane. The sealed sandwich structure prevents further LEC proliferation and migration, thereby reducing the incidence of PCO. The monolayer LEC’s proliferation probably only slightly influences the contrast sensitivity and not transparency of posterior capsules. In addition to LECs, the proteins that make up the extracellular matrix, including fibronectin, vimentin, laminin, and collagen IV, can play a role in this adhesion mode [45,46].
Thus, the molecular basis of relatively lower PCO incidences in hydrophobic IOL than hydrophilic IOL has been speculated by protein adsorption behaviors [48,49]. The hydrophobic surface is considered more bio-sticky to the posterior capsule than hydrophilic one via adsorbing more proteins and via the adsorbed adhesion protein-induced cell layer [44,45,46]. On the other hand, the similarly shaped hydrophobic acrylic IOLs with stronger adhesive force were shown to inhibit LEC migration and PCO more than IOLs with weaker adhesive force [50]. Arjun et al. [51] proved fibronectin adsorption of simulated posterior capsules significantly reduced simulated LEC infiltration between hydrophobic acrylic IOLs and the posterior capsules by increasing adhesion forces compared with fibronectin-free controls. Additionally, LECs slow down the rate of the differentiation once they are well attached [52].
Previous studies have shown that the ultraviolet/ozone (UV/O3) or argon plasma-treated IOL surfaces could enhance LEC and protein adhesion, thereby solidifying the binding between the IOL and posterior capsule membrane [53]. Both UV/O3 treatment and argon plasma treatment increased nitrogen substituents and functional OH and COOH functional groups, thus improve surface characteristics (e.g., wettability and adhesion). Additionally, the COOH groups are highly adhesive to protein fibronectin [54]. The post-treated IOLs significantly inhibited PCO formation in comparison to control IOLs, and the UV/O3 treatment was more effective than the argon plasma treatment [53]. Additionally, UV/O3 treatment causes little damage to the IOL surface, whereas argon plasma may promote surface deterioration through an etching effect. Farukhi et al. [55] used UV/O3 treatment to modify the posterior surface of IOLs, which achieved similar PCO prevention effects in in vivo animal experiments.
The RGD peptide (Arg-Gly-Asp sequence) is the primary functional motif of fibronectin that promotes cell adhesion [45,46,56]. The RGD modification method has been widely studied for promoting cell adhesion onto material surfaces in cancer therapy and diagnosis [57]. The biomimetic strategy of RGD peptide-grafting on the IOL surface has been demonstrated superiority in enhancing the LEC adhesion without inducing the EMT process of LECs in vitro experiments [58]. The surface modification did not produce a significant change in the optical and mechanical properties of IOLs. The IOL with RGD peptide-functionalization has the potential to reconstruct the sandwich structure of the IOL-LEC capsule biomaterial. However, the effect of PCO prophylaxis should be further confirmed by in vivo experiments. On the other hand, macrophages, fibroblastic cells, and other types of cells will recognize the RGD peptide via their surficial integrins and attach to RGD-functionalized surfaces non-discriminatorily [56,59]. The RGD-based strategy lacks biological specificity and thereby has no direct regulation effect on other cell processes, for example, cell differentiation.

2.3. Micro-Patterned IOLs

The edge design of IOLs is closely related to cell migration and PCO formation. Nishi et al. [60] first demonstrated that the sharp-edge design of IOLs could decrease PCO incidence in clinical practice by inhibiting LEC migration from the IOL edge to the central optical axis [61,62].
In fact, cell migration is based on the interaction of focal adhesions (proteins embedded in the cell membrane) with biomaterial interfaces. Additionally, the unique micro-surface or micro-patterned topography could direct specific biological behaviors, such as cell migration in the eyes, by regulating the placement of focal adhesions [63,64]. Magin et al. [65] reported that silicone protective membrane (PM) with different Sharklet micro-patterns could inhibit LEC migration on its surface in an in vitro PCO model compared to the PM without micro-patterns. Additionally, the micro-patterns protruding from the surface reduced migration more than the recessed features. Thus, Kramer et al. [66] implanted the Sharklet micro-patterned PM in the capsule after cataract surgery and then embedded the IOL in the PM device, which resulted in PCO inhibition. Subsequently, the research group directly incorporated a Sharklet micro-patterned membrane on the posterior surface of the IOL peripheral rim to effectively alleviate PCO severity [67].
The femtosecond laser (FL) processing of materials, known as laser ablation, is a facile and efficient technique for creating desired micro-patterned interfaces that control focal cell adhesion, migration, differentiation, and other behaviors [68,69,70,71,72]. For example, the FS-ablated electrospun scaffolds facilitate endothelial cell ingrowth and increase the M2 macrophage and overall cell infiltration [69]. Additionally, FL-patterned silicon substrates with micro-cone arrays were shown to work as a potential and valuable platform for patterning neurons into artificial networks [71]. Another study also investigated the effect of periodic nano-textured patterns on LEC behaviors. Here, the researchers innovatively prepared the micro-patterned IOL samples of poly(HEMA) using femtosecond laser (FL) microfabrication (Figure 4). These groove/ridge patterns inhibited the migration of the single and collective LECs in a width-dependent mode. The groove with a size comparable to the size of cells exhibited the most significant inhibition effect [73]. Additionally, the proliferative rates of LECs were also slightly decreased on the nano-textured patterned surface. Experiments in vivo demonstrated that the implantation of commercially available IOLs modified by the FL ablation did not induce intraocular inflammation, but effectively reduced PCO severity for eight weeks. Furthermore, the FL induced ablation uses ultrashort laser pulses (~100 fs) to minimize thermal stress and collateral damage to materials, such as metal, ceramic, silicon, and polymer, resulting in stable and reproducible patterning processing. This facile and precise strategy for FL microfabrication is free of chemical treatment and allows for potential application in various biomaterials for regulating cell behaviors in biomedical devices and implants.

2.4. Photothermal IOLs

As a non-invasive treatment method, near-infrared (NIR) photothermal therapy (PTT) has been widely studied and used in the treatment of many diseases [74,75,76]. Nanomaterials with photothermal conversion properties can have a therapeutic role when converting light energy into heat energy under the irradiation of near-infrared light (700–1400 nm wavelength). Compared with drug treatment, PTT treatment minimizes collateral damage to other tissues through controllable nanomaterial distribution and laser irradiation. Carbon-based nanocomposites (such as graphene derivatives and carbon nanotubes), metal nanomaterials (such as Au nanorods), polymers, and other nanocomposites (such as polydopamine) are often used in the development of PTT because of their excellent photothermal conversion properties [77].
Recent literature of photothermal IOLs for PCO prophylaxis with in vivo results is summarized in Table 2. Lin et al. [76] took the lead in applying PTT to remove residual LECs in the eye and prevent PCO (Figure 5). SiO2-coated Au nanorods (Au@SiO2) were integrated into the edge of the IOL using the activation immersion method to obtain nanostructured photothermal ring-modified IOLs. The photothermal IOL has excellent biocompatibility and optical properties, and has a regional restrictive photothermal effect. This allows it to accurately eliminate LECs in vivo and in vitro without affecting other tissues in the eye, thus inhibiting the progress of PCO.
Because of the high cost, complex synthesis, and potential long-term cytotoxicity of gold nanomaterials, Xu et al. [78] used polydopamine (PDA) as the photothermal modification material for IOLs because it is easier to obtain and prepare and has better biocompatibility. The PDA coating was deposited on the surface of the rim annulus of the IOL by a CuSO4/H2O2-triggered PDA rapid deposition technique. Compared with normal IOLs, the modified IOLs could play an influential role in sterilization and PCO prevention under NIR light irradiation. Reduced graphene oxide (rGO)-based nanocomposites have been widely used in PPT for advantages of pronounced photothermal conversion effect, facile synthesis, good biocompatibility, and low cost [79,80,81]. A previous study proved that repeated rGO exposure did not cause eye toxicity in mouse models [82]. Thus, our team fabricated a polyethyleneimine (PEI)/reduced graphene oxide (rGO) thin film coatings on IOL surface by controllable layer-by-layer self-assembly. The rGO@IOL implant with postoperative NIR irradiation showed promise for clinical applications in PCO prophylaxis [83]. Moreover, carboxylated CuInS/ZnS nano-quantum dots without toxic heavy metals have also been used to develop photothermal IOLs [84].
To enhance the efficiency of photothermal IOLs, Mao et al. [85] introduced a combined photothermal therapy and chemotherapy strategy for PCO prevention (Figure 6). BP-DOX@IOL was prepared by assembling the antiproliferative drug doxorubicin (DOX)-loaded black phosphorus (BP) nanosheets onto the non-optical section of the commercial IOL. The NIR light irradiation triggered the release of DOX loaded by BP-DOX@IOL and led to the area-limited heating of the IOL-modified area through the photothermal conversion effect, which jointly destroyed LECs efficiently. Although the BP-DOX@IOL inhibited the progress of PCO to a certain extent after implantation in the eye, the superposition of postoperative near-infrared light treatment achieved a more excellent PCO prevention effect.
Table 2. Summary of reviewed literature of photothermal and photodynamic IOLs for PCO prophylaxis with in vivo results.
Table 2. Summary of reviewed literature of photothermal and photodynamic IOLs for PCO prophylaxis with in vivo results.
CompositionMechanismMain Fabrication MethodIOL TypeObservationIrradiation Protocol In VivoRef.
Au nanorods/SiO2PTToxygen plasma-aided
activation and immersion
commercial acrylic IOLthirty days
in rabbit model
808 nm, 3.3 W/cm2, 10 min;
once a week
[76]
PDA/PEIPTTCuSO4/H2O2-triggered rapid
deposition
acrylic IOL
(66Vision Tech.)
four weeks
in rabbit model
808 nm, 0.3 W/cm2, 10 min;
at day 1, 3, 5, 7, 14, 21, and 28
[78]
rGO/PEIPTTplasma-aided activation and layer-by-layer self-assembly acrylic IOL
(66Vision Tech.)
four weeks
in rabbit model
808 nm, 2.5 W/cm2, 10 min;
three times in the first week, twice in the second week, and once a week in subsequent weeks
[84]
BP/DOXPTT and
chemotherapy
facial activation and immersionacrylic IOL
(Eyebright Medical Tech.)
four weeks
in rabbit model
808 nm, 1 W/cm2, 3 min;
once a week from the second week
[85]
ICG/PLGAPDTfacial activation, electrostatic attraction and immersioncommercial IOLeight weeks
in rabbit model
785 nm, 120 mW/cm2, 10 min;
every day for one month
[86]
α-CD-Ce-6/PPEGMAPDTRAFT technology and
supramolecular self-assembly
acrylic IOL
(66Vision Tech.)
two months
in rabbit model
660 nm, 2.4 W/cm2, 2 min;
once a day in the first week
[87]
Ce-6/PDAPDTself-polymerizationacrylic IOL
(66Vision Tech.)
four weeks
in rabbit model
660 nm, 2.4 W/cm2, 2 min;
once a day for two weeks
[88]

2.5. Photodynamic IOLs

Photodynamic therapy (PDT) uses photosensitizers (PSs) under the irradiation of specific wavelengths of light to convert oxygen into reactive oxygen species (ROS), thereby inducing cell apoptosis. PDT therapy has been widely used to treat diseases with abnormal cell proliferation, such as cancer [89]. Similar to PTT treatment, PDT can minimize collateral damage to other tissues through controlled illumination and the distribution of photosensitive materials.
Previous PDT regimens that used photosensitizer solution directly perfuse the capsular bag followed by light exposure, which may induce potential ocular toxicity [90,91]. Therefore, modifying photosensitizer materials on the surface of IOL is a feasible approach (summarized in Table 2). Indocyanine green (ICG), a non-toxic and water-soluble dye, is a commonly used reagent in ophthalmic clinical applications and a photosensitizer material. Zhang et al. [86] prepared the photodynamic IOLs by adsorbing ICG molecules with positively-charged IOLs and sealing them with polylactic-co-glycolic acid (PLGA). Because of the presence of ICG, the light transmittance of the assembled ICG-IOL decreases. However, after implantation into the eye, with the gradual degradation of the PLGA, the water-soluble ICG is released from the IOL, and the light transmittance of the IOL can be restored. ICG-IOL combined with laser irradiation (785 nm) effectively reduced LEC activity and inhibited LEC proliferation and migration. In vivo implantation experiments showed that the ICG-IOL-based PDT system could significantly prevent the occurrence of PCO and had good biocompatibility.
Tang et al. [87] used chlorin e6 (Ce6) as a model photosensitizer and grafted it onto α-cyclodextrin (α-CD) molecules to synthesize α-CD-Ce6 (Figure 7). Subsequently, utilizing the host–guest interaction between PPEGMA and α-CD, a PPEGMA-α-CD-Ce6 coating with photodynamic therapy function was constructed on the surface of the previously PPEGMA brush-modified IOL [17,87]. In vitro experiments confirmed that the photodynamic IOL could generate a large amount of ROS under 660 nm laser irradiation, effectively inducing the apoptosis of LECs and inhibiting PCO development in vivo. In other research, this group attached Ce6 to the IOL surface when fabricating highly viscous PDA coatings via the rapid self-polymerization of dopamine. It also proved that the PDT coating based on the Ce6 photosensitizer could eliminate residual LECs significantly and prevent PCO formation [88].

2.6. Drug-Loaded IOLs

As drug delivery devices for handling postoperative cataract complications, IOLs can improve drug bioavailability, ensure sustained drug release, and enhance patient compliance, with broad clinical application prospects [22]. Drug-loaded IOLs can be constructed using direct drug solution soaking, supercritical impregnation, drug reservoir attachment, and surface modification. To prevent the PCO, drug-loaded IOLs can transport anti-inflammatory, antineoplastic, anti-cell migration, or anti-EMT drugs into the capsular bag [22,23]. Thus, the reviewed literature of drug-loaded IOLs for PCO prophylaxis with in vivo results is summarized in Table 3.
It has been suggested that the inflammatory response after cataract surgery induces LEC proliferation, migration, EMT, and other cell behaviors, which may accelerate the process of PCO [92]. The cyclooxygenase-2 (COX-2) level in LECs is associated with PCO development, and it is often elevated by injury or inflammatory cytokines [93]. Nonsteroidal anti-inflammatory drugs (NSAIDs) exert anti-inflammatory effects by inhibiting COX-2. After finding that the selective NSAIDs Celecoxib (CXB) inhibited the proliferation of LECs in vitro [94], Brookshire et al. [95] implanted IOLs into the eyes of experimental dogs after incubating IOLs in CXB solution, and this effectively reduced the postoperative inflammation. In the fourth week, the CXB-IOL group showed a better PCO prevention effect than the group treated by another COX-2 inhibitor, namely, bromfenac (BF) eye drops. However, the long-term (56 weeks) PCO prevention effect was significantly lower than the BF eye drops-treated group. Zhang et al. [96] pointed out that BF can inhibit the transforming growth factor-β2 (TGF-β2) through the signal-regulated kinase (ERK)/glycogen synthase kinase-3β (GSK-3β)/Snail signaling pathway. The team fabricated BF-loaded PLGA coatings on the haptic region of the IOL by ultrasonic spraying. BF-PLGA-IOL inhibited PCO formation in rabbit PCO models, which was more effective than the BF drops-treated group.
Antitumor drugs can generally be divided into cytotoxic drugs (such as 5-Fluorouracil (5-FU), DOX, and paclitaxel (PAC)) and non-cytotoxic drugs (such as gefitinib and erlotinib) [23]. However, the safety and efficacy of antineoplastic drugs used in the eyes require close attention. To reduce the toxicity of 5-FU, Huang et al. [97] prepared 5-FU-loaded CHI nanoparticles (NPs) and surface-modified IOLs with drug-loaded nanoparticles, which could sustainably release 5-FU after being implanted into the eye. The released 5-FU then inhibited LEC proliferation and promoted LEC apoptosis. Han et al. [98] prepared DOX-incorporated chitosan (CHI) NPs using a sodium tripolyphosphate (TPP) gel method. The positively charged CHI-TPP-DOX nanoparticles (CTDNPs) and the negatively charged heparin (HEP) self-assembled layer-by-layer on the IOL surface through electrostatic interaction to obtain the (HEP/CTDNP)n multilayer-modified IOL. The LEC adhesion, proliferation, and migration on the modified IOL surface were significantly inhibited because of the surface hydrophilic modification combined with the drug-loading modification. This IOL effectively reduced the formation of PCO and the Soemmerring’s ring (SR). Similar studies focused on IOL modification by hydrophilic anti-biofouling coatings loaded with DOX or PAC have also confirmed that such multifunctional IOLs may have great potential in preventing PCO. This makes up for the shortcomings of simple hydrophilic anti-biofouling IOLs with poor long-term PCO prevention [99,100]. In another study, drug-eluting IOLs loaded with the EGF inhibitors, gefitinib or erlotinib, could effectively slow LEC proliferation in ex vivo models of the human lens capsular bag. Additionally, sustainable drug release showed no toxicity to corneal endothelial cells [101,102].
Immunosuppressants, such as cyclosporin A (CsA) and rapamycin (RAPA), also have the potential to inhibit cellular proliferation and PCO formation [23]. For example, the CsA-loaded PLGA (CsA@PLGA) coating-modified IOL prepared by Teng et al. [103] reduced the degree of PCO within six months after implantation in rabbit models. Using the spin-coating technique, Lu et al. [104] designed and fabricated a centrifugally concentric ring-patterned drug-loaded PLGA coating (Figure 8). The concentric ring morphology, drug loading, and release properties were investigated, and the spin-coating parameters were optimized. Then, they created a concentric coating with a thin center and a thick rim, which is especially suitable for the surface modification of the intraocular lens without affecting the optical quality of the IOL. The CsA@PLGA coating-modified IOLs significantly inhibited cell proliferation and induced cell death via the autophagy-mediated cell death pathway. In vivo intraocular implant results confirmed its inhibitory effect on PCO. In another study, the researchers compared the preventive effects of RAPA intraoperative capsular bag perfusion, postoperative RAPA eye drops, and PLGA coating-modified IOLs loaded with RAPA on PCO prevention [105]. The results showed that in the RAPA-PLGA-IOL group, the anterior RAPA concentration reached a peak at 4 days after surgery and continued to release RAPA for up to 8 weeks. Compared with the control group, only the RAPA-PLGA-IOL group can greatly reduce the degree of posterior capsular opacity, and there is no statistical difference in the degree of PCO among the other groups.
EMT usually demonstrates the loss of cell polarity and adhesion and the acquisition of migration and invasion capabilities. This is accompanied by the production of large amounts of extracellular matrix and the inhibition of cell apoptosis simultaneously. Furthermore, the cell migration and EMT process play essential roles in PCO pathogenesis. Methotrexate intraocular lenses prepared by supercritical impregnation reduce cellular fibrosis by inhibiting the EMT process [106]. Moreover, TGF-β is a key signaling molecule that induces LEC migration and the EMT process, which is usually used to construct EMT models [107]. The occurrence and development of PCO are expected to be inhibited by targeting TGF-β, TGF-β receptors, and their upstream and downstream signaling pathways. Sun et al. [108] successfully immobilized the anti-TGF-β2 antibody on the IOL surface by plasma pretreatment and layer-by-layer self-assembly technology. These IOLs maintained stability and immune activity for at least three months. Anti-TGF-β2 antibody-functionalized IOLs can directly target and bind TGF-β2 molecules after implantation in the capsular bag, thereby inhibiting the TGF-β2-induced LEC migration and EMT process after cataract surgery. As mentioned above, the molecular mechanism of bromfenac sodium targeting the TGF-β2 signaling pathway is used to inhibit the cell migration and EMT process of LECs [96].
Table 3. Summary of reviewed literature of drug-loaded IOLs for PCO prophylaxis with in vivo results.
Table 3. Summary of reviewed literature of drug-loaded IOLs for PCO prophylaxis with in vivo results.
DrugOther
Composition
MechanismMain Loading MethodLoading DosageIOL TypeObservationRef.
CXBnonenot verified in the articleimmersionunclearacrylic IOL56 weeks
in dog model
[95]
BFPLGAinhibit cell migration and TGF-β2-induced EMT ultrasonic spray technique≈100 μg/IOL of BFacrylic IOL
(Wuxi Vision PRO)
four weeks
in rabbit model
[96]
5-FUCHIinhibit cell proliferation and promote cell apoptosisfluorine ion beam-aided
activation and immersion
≈19.55 ± 1.31 mg/IOL of 5-FUPMMA IOL
(CJ55, Rafi Systems)
four weeks
in rabbit model
[97]
DOXCHI/TPP/HEPinhibit cell adhesion, proliferation, and migrationionic gelation, surficial activation, and layer-by-layer self-assemblyunclearacrylic IOL
(66Vision Tech.)
two months
in rabbit model
[98]
DOXPDA/MPCinhibit cell adhesion, proliferationself-polymerization and
immersion
≈2.8 μg/IOL of DOXacrylic IOL
(66Vision Tech.)
six weeks
in rabbit model
[99]
CsAPLGAinhibit cell proliferation and promote autophagy-mediated cell deathspin-coating techniqueunclearacrylic IOL
(66Vision Tech.)
four weeks
in rabbit model
[104]
RAPAPLGAnot verified in the articleproprietary spray techniqueunclearPMMA IOL
(Suzhou Medical Instrument)
three months
in rabbit model
[105]

3. Biosecurity of IOLs in PCO Prophylaxis

Biosecurity issues of modified IOLs using different strategies for PCO prevention still need more attention and exploration. Researchers usually perform histopathology examinations of other eye tissues, including cornea, iris, and retina, to illustrate the biosecurity in IOLs. Nonetheless, they should also attach more importance to detections of intraocular pressure (IOP), corneal endothelial cells, and visual electrophysiology in vivo experiments. The IOP reflects the circulation situation of aqueous humor. Corneal endothelial cells are vital for keeping the corneal transparent. Additionally, visual electrophysiology (such as electroretinogram) demonstrates the retinal function.
Photothermal IOLs have nowadays been shown to exert a local heating effect and kill LECs in a limited field, as demonstrated by in vitro and in vivo experiments [76,78,83,84]. Since ROS generated in the PDT strategy has a short action distance (<20 nm) and limited lifetime (<40 ns), photodynamic IOLs were effective in killing adherent LECs on the surface and alleviated toxicity to other eye tissues [86,87]. Approaches of PTT and PDT for PCO prevention caused no significant changes in IOP and corneal endothelial cell count [85,86]. However, researchers have not achieved direct and accurate monitoring of intraocular temperature change. Additionally, new temperature monitoring technology is needed to help researchers optimize the assembling of photothermal materials and the use of illumination power. Nevertheless, retinal toxicity is a significant issue when applying photothermal or photodynamic IOLs with light irradiation. Mao et al. performed an electroretinogram test and found the retinal function stayed normal in the group of BP-DOX@IOL implantation with 808 nm laser irradiation treatment [85]. The drug-loaded IOLs are not yet used in clinical studies since it is vital to ensure that those pharmacological agents cause no effect on other ocular tissues. More specifically, toxicity to the corneal endothelium leads to the decompensation and opacification of the cornea [5,22,23]. Thus, we recommend that functional and structural analyses for evaluating the biocompatibility and biosecurity of modified IOLs be combined with specific treatments.

4. Conclusions and Future Perspectives

Scientists have developed different surface-modified IOLs using different strategies to disrupt PCO formation. Anti-biofouling IOLs can effectively resist the adhesion of proteins, cells, and even bacteria to reduce the intraocular inflammatory response after cataract surgery. Decreased LEC adhesion and migration on the IOL surface can reduce PCO incidence. Adhesion-enhanced IOLs can adhere more closely to the posterior capsule to form a sandwich structure of the IOL, monolayer LECs, and posterior capsule membrane, promoting LEC adhesion to inhibit LEC proliferation and differentiation, thereby preventing PCO. The surface micro-patterned IOL utilizes the specially designed surface topography to regulate LEC migration behavior to the center of the posterior capsule, effectively suppressing the opacity of the posterior capsule. Photothermal and photodynamic IOLs have introduced PTT and PDT therapy, which can safely and effectively remove residual LECs. Through controllable irradiation of specific wavelength light and distribution of photothermal materials or photosensitizers, PTT and PDT strategies will not damage other ocular tissues outside IOLs. Drug-loaded IOLs inhibit PCO development by loading various drugs that regulate the proliferation, migration, EMT, and other behaviors of residual LECs.
However, there are still some problems waiting to be solved in the future if we want to apply these new types of IOLs for PCO prevention in the clinical. The first one is biosecurity, discussed in Section 3. Researchers should perform rigorous and precise approaches to evaluating the use of laser or light irradiation and establish relatively uniform standards for the ophthalmic treatment of PCO. Certain issues, such as controlled and sustained release and ocular toxicity of drugs, require more in-depth research to ensure intraocular safety and the effectiveness of PCO prevention. The pharmaceuticals will ultimately be released from drug-loaded IOLs and lose their effect once the concentration in the lens capsule decreases below the effective concentration. Nonetheless, PTT and PDT strategies can be performed repeatedly under unlimited time constraints since the photothermal and photodynamic coatings can be stable on IOL surfaces. Additionally, anti-biofouling, enhance-adhesive, or micro-patterned modifications are also retained for a longer period of time than the drug-loading modification. Pharmacotherapy can be combined with other non-pharmaceutical strategies. On the other hand, methods for only regulating LECs behaviors, not killing, can be combined with methods for eliminating residual LECs. A single functional IOL may be less effective in long-term PCO prevention; thus, developing multifunctional IOLs united with different surface modifications can generate a more effective PCO prevention system. In vitro cell experiments and in vivo animal PCO model experiments have confirmed that many surface-modified IOLs have excellent biocompatibility and PCO prevention effects. However, there is still a lack of more reliable, clinically relevant research data, which requires further investigation.
The surface-modified intraocular lenses with different functions require the cross-integration of multidisciplinary theoretical knowledge, such as materials science, medicine, pharmacology, and cell biology. They have broad clinical application prospects in the future prevention and treatment of PCO.

Author Contributions

Y.Z., C.Z. and S.C. collected the information and drafted and revised the manuscript. J.H. contributed to collecting information and editing the manuscript. L.S. contributed to revised the manuscript. Y.Y. directed the work and finalized the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

This project was supported by the National Natural Science Foundation of China (Grant No. 82070938) and Natural Science Foundation of Zhejiang Province (Grant No. LY20H120011).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Liu, Y.; Wilkins, M.; Kim, T.; Malyugin, B.; Mehta, J.S. Cataracts. Lancet 2017, 390, 600–612. [Google Scholar] [CrossRef]
  2. Chen, X.; Xu, J.; Chen, X.; Yao, K. Cataract: Advances in Surgery and Whether Surgery Remains the Only Treatment in Future. Adv. Ophthalmol. Pract. Res. 2021, 1, 100008. [Google Scholar] [CrossRef]
  3. Allen, D.; Vasavada, A. Cataract and Surgery for Cataract. BMJ 2006, 333, 128–132. [Google Scholar] [CrossRef] [PubMed]
  4. Wormstone, I.M.; Wang, L.; Liu, C.S.C. Posterior Capsule Opacification. Exp. Eye Res. 2009, 88, 257–269. [Google Scholar] [CrossRef]
  5. Nibourg, L.M.; Gelens, E.; Kuijer, R.; Hooymans, J.M.M.; van Kooten, T.G.; Koopmans, S.A. Prevention of Posterior Capsular Opacification. Exp. Eye Res. 2015, 136, 100–115. [Google Scholar] [CrossRef]
  6. Medsinge, A.; Nischal, K.K. Pediatric Cataract: Challenges and Future Directions. Clin. Ophthalmol. 2015, 9, 77–90. [Google Scholar] [CrossRef] [Green Version]
  7. Karahan, E.; Er, D.; Kaynak, S. An Overview of Nd:YAG Laser Capsulotomy. Med. Hypothesis Discov. Innov. Ophthalmol. 2014, 3, 45–50. [Google Scholar]
  8. Steinert, R.F.; Puliafito, C.A.; Kumar, S.R.; Dudak, S.D.; Patel, S. Cystoid Macular Edema, Retinal Detachment, and Glaucoma after Nd:YAG Laser Posterior Capsulotomy. Am. J. Ophthalmol. 1991, 112, 373–380. [Google Scholar] [CrossRef]
  9. Wesolosky, J.D.; Tennant, M.; Rudnisky, C.J. Rate of Retinal Tear and Detachment after Neodymium:YAG Capsulotomy. J. Cataract Refract. Surg 2017, 43, 923–928. [Google Scholar] [CrossRef]
  10. Thompson, J.; Lakhani, N. Cataracts. Prim. Care Clin. Off. Pract. 2015, 42, 409–423. [Google Scholar] [CrossRef]
  11. Wormstone, I.M.; Wormstone, Y.M.; Smith, A.J.O.; Eldred, J.A. Posterior Capsule Opacification: What’s in the Bag? Prog. Retin. Eye Res. 2021, 82, 100905. [Google Scholar] [CrossRef]
  12. Amon, M. Biocompatibility of Intraocular Lenses. J. Cataract Refract. Surg. 2001, 27, 178–179. [Google Scholar] [CrossRef]
  13. Saika, S. Relationship between Posterior Capsule Opacification and Intraocular Lens Biocompatibility. Prog. Retin. Eye Res. 2004, 23, 283–305. [Google Scholar] [CrossRef]
  14. Özyol, P.; Özyol, E.; Karel, F. Biocompatibility of Intraocular Lenses. Turk. J. Ophthalmol. 2017, 47, 221–225. [Google Scholar] [CrossRef]
  15. Krall, E.M.; Arlt, E.M.; Jell, G.; Strohmaier, C.; Moussa, S.; Dexl, A.K. Prospective Randomized Intraindividual Comparison of Posterior Capsule Opacification after Implantation of an IOL with and without Heparin Surface Modification. J. Refract. Surg. 2015, 31, 466–472. [Google Scholar] [CrossRef]
  16. Bozukova, D.; Pagnoulle, C.; De Pauw-Gillet, M.-C.; Desbief, S.; Lazzaroni, R.; Ruth, N.; Jérôme, R.; Jérôme, C. Improved Performances of Intraocular Lenses by Poly(Ethylene Glycol) Chemical Coatings. Biomacromolecules 2007, 8, 2379–2387. [Google Scholar] [CrossRef]
  17. Lin, Q.; Tang, J.; Han, Y.; Xu, X.; Hao, X.; Chen, H. Hydrophilic Modification of Intraocular Lens via Surface Initiated Reversible Addition-Fragmentation Chain Transfer Polymerization for Reduced Posterior Capsular Opacification. Colloids Surf. B Biointerfaces 2017, 151, 271–279. [Google Scholar] [CrossRef]
  18. Lan, X.; Lei, Y.; He, Z.; Yin, A.; Li, L.; Tang, Z.; Li, M.; Wang, Y. A Transparent Hydrophilic Anti-Biofouling Coating for Intraocular Lens Materials Prepared by “Bridging” of the Intermediate Adhesive Layer. J. Mater. Chem. B 2021, 9, 3696–3704. [Google Scholar] [CrossRef]
  19. Barbour, W.; Saika, S.; Miyamoto, T.; Ohnishi, Y. Biological Compatibility of Polymethyl Methacrylate, Hydrophilic Acrylic and Hydrophobic Acrylic Intraocular Lenses. Ophthalmic Res. 2005, 37, 255–261. [Google Scholar] [CrossRef]
  20. Lewis, A.C. Interleukin-6 in the Pathogenesis of Posterior Capsule Opacification and the Potential Role for Interleukin-6 Inhibition in the Future of Cataract Surgery. Med. Hypotheses 2013, 80, 466–474. [Google Scholar] [CrossRef]
  21. Huang, Q.; Cheng, G.P.-M.; Chiu, K.; Wang, G. Surface Modification of Intraocular Lenses. Chin. Med. J. 2016, 129, 206–214. [Google Scholar] [CrossRef] [Green Version]
  22. Topete, A.; Saramago, B.; Serro, A.P. Intraocular Lenses as Drug Delivery Devices. Int. J. Pharm. 2021, 602, 120613. [Google Scholar] [CrossRef]
  23. Zhang, R.; Xie, Z. Research Progress of Drug Prophylaxis for Lens Capsule Opacification after Cataract Surgery. J. Ophthalmol. 2020, 2020, 2181685. [Google Scholar] [CrossRef]
  24. Mylona, I.; Tsinopoulos, I. A Critical Appraisal of New Developments in Intraocular Lens Modifications and Drug Delivery Systems for the Prevention of Cataract Surgery Complications. Pharmaceuticals 2020, 13, 448. [Google Scholar] [CrossRef]
  25. Cooksley, G.; Lacey, J.; Dymond, M.K.; Sandeman, S. Factors Affecting Posterior Capsule Opacification in the Development of Intraocular Lens Materials. Pharmaceutics 2021, 13, 860. [Google Scholar] [CrossRef]
  26. Sanchez-Cano, C.; Carril, M. Recent Developments in the Design of Non-Biofouling Coatings for Nanoparticles and Surfaces. Int. J. Mol. Sci. 2020, 21, 1007. [Google Scholar] [CrossRef] [Green Version]
  27. Leslie, D.C.; Waterhouse, A.; Berthet, J.B.; Valentin, T.M.; Watters, A.L.; Jain, A.; Kim, P.; Hatton, B.D.; Nedder, A.; Donovan, K.; et al. A Bioinspired Omniphobic Surface Coating on Medical Devices Prevents Thrombosis and Biofouling. Nat. Biotechnol. 2014, 32, 1134–1140. [Google Scholar] [CrossRef]
  28. He, Z.; Yang, X.; Wang, N.; Mu, L.; Pan, J.; Lan, X.; Li, H.; Deng, F. Anti-Biofouling Polymers with Special Surface Wettability for Biomedical Applications. Front. Bioeng. Biotechnol. 2021, 9, 807357. [Google Scholar] [CrossRef]
  29. Chan, H.-M.; Erathodiyil, N.; Wu, H.; Lu, H.; Zheng, Y.; Ying, J.Y. Calcium Cross-Linked Zwitterionic Hydrogels as Antifouling Materials. Mater. Today Commun. 2020, 23, 100950. [Google Scholar] [CrossRef]
  30. Kang, S.; Choi, J.A.; Joo, C.-K. Comparison of Posterior Capsular Opacification in Heparin-Surface-Modified Hydrophilic Acrylic and Hydrophobic Acrylic Intraocular Lenses. Jpn. J. Ophthalmol. 2009, 53, 204–208. [Google Scholar] [CrossRef] [PubMed]
  31. Lee, H.I.; Kim, M.K.; Ko, J.H.; Lee, H.J.; Wee, W.R.; Lee, J.H. The Efficacy of an Acrylic Intraocular Lens Surface Modified with Polyethylene Glycol in Posterior Capsular Opacification. J. Korean Med. Sci. 2007, 22, 502. [Google Scholar] [CrossRef] [Green Version]
  32. Xu, X.; Tang, J.; Han, Y.; Wang, W.; Chen, H.; Lin, Q. Surface PEGylation of Intraocular Lens for PCO Prevention: An In Vivo Evaluation. J. Biomater. Appl. 2016, 31, 68–76. [Google Scholar] [CrossRef]
  33. Monge, S.; Canniccioni, B.; Graillot, A.; Robin, J.-J. Phosphorus-Containing Polymers: A Great Opportunity for the Biomedical Field. Biomacromolecules 2011, 12, 1973–1982. [Google Scholar] [CrossRef]
  34. Shigeta, M.; Tanaka, T.; Koike, N.; Yamakawa, N.; Usui, M. Suppression of Fibroblast and Bacterial Adhesion by MPC Coating on Acrylic Intraocular Lenses. J. Cataract Refract. Surg. 2006, 32, 859–866. [Google Scholar] [CrossRef]
  35. Huang, X.; Yao, K.; Zhang, Z.; Zhang, Y.; Wang, Y. Uveal and Capsular Biocompatibility of an Intraocular Lens with a Hydrophilic Anterior Surface and a Hydrophobic Posterior Surface. J. Cataract Refract. Surg. 2010, 36, 290–298. [Google Scholar] [CrossRef]
  36. Huang, X.; Li, H.; Lin, L.; Yao, K. Reduced Silicone Oil Adherence to Silicone Intraocular Lens by Surface Modification with 2-Methacryloyloxyethyl Phosphoryl-Choline. Curr. Eye Res. 2013, 38, 91–96. [Google Scholar] [CrossRef]
  37. Han, Y.; Xu, X.; Tang, J.; Shen, C.; Lin, Q.; Chen, H. Bottom-up Fabrication of Zwitterionic Polymer Brushes on Intraocular Lens for Improved Biocompatibility. Int. J. Nanomed. 2016, 12, 127–135. [Google Scholar] [CrossRef] [Green Version]
  38. Tan, X.; Zhan, J.; Zhu, Y.; Cao, J.; Wang, L.; Liu, S.; Wang, Y.; Liu, Z.; Qin, Y.; Wu, M.; et al. Improvement of Uveal and Capsular Biocompatibility of Hydrophobic Acrylic Intraocular Lens by Surface Grafting with 2-Methacryloyloxyethyl Phosphorylcholine-Methacrylic Acid Copolymer. Sci. Rep. 2017, 7, 40462. [Google Scholar] [CrossRef] [Green Version]
  39. Wang, R.; Xia, J.; Tang, J.; Liu, D.; Zhu, S.; Wen, S.; Lin, Q. Surface Modification of Intraocular Lens with Hydrophilic Poly(Sulfobetaine Methacrylate) Brush for Posterior Capsular Opacification Prevention. J. Ocul. Pharmacol. Ther. 2021, 37, 172–180. [Google Scholar] [CrossRef]
  40. Necas, J.; Bartosikova, L.; Brauner, P.; Kolar, J. Hyaluronic Acid (Hyaluronan): A Review. Vet. Med. 2008, 53, 397–411. [Google Scholar] [CrossRef] [Green Version]
  41. Ravi Kumar, M.N.V. A Review of Chitin and Chitosan Applications. React. Funct. Polym. 2000, 46, 1–27. [Google Scholar] [CrossRef]
  42. Lin, Q.; Xu, X.; Wang, B.; Shen, C.; Tang, J.; Han, Y.; Chen, H. Hydrated Polysaccharide Multilayer as an Intraocular Lens Surface Coating for Biocompatibility Improvements. J. Mater. Chem. B 2015, 3, 3695–3703. [Google Scholar] [CrossRef]
  43. Wu, Q.; Liu, D.; Chen, W.; Chen, H.; Yang, C.; Li, X.; Yang, C.; Lin, H.; Chen, S.; Hu, N.; et al. Liquid-like Layer Coated Intraocular Lens for Posterior Capsular Opacification Prevention. Appl. Mater. Today 2021, 23, 100981. [Google Scholar] [CrossRef]
  44. Linnola, R.J.; Holst, A. Evaluation of a 3-Piece Silicone Intraocular Lens with Poly(Methyl Methacrylate) Haptics. J. Cataract Refract. Surg. 1998, 24, 1509–1514. [Google Scholar] [CrossRef]
  45. Linnola, R.J.; Werner, L.; Pandey, S.K.; Escobar-Gomez, M.; Znoiko, S.L.; Apple, D.J. Adhesion of Fibronectin, Vitronectin, Laminin, and Collagen Type IV to Intraocular Lens Materials in Pseudophakic Human Autopsy Eyes. Part 2: Explanted Intraocular Lenses. J. Cataract Refract. Surg. 2000, 26, 1807–1818. [Google Scholar] [CrossRef]
  46. Linnola, R.J.; Werner, L.; Pandey, S.K.; Escobar-Gomez, M.; Znoiko, S.L.; Apple, D.J. Adhesion of Fibronectin, Vitronectin, Laminin, and Collagen Type IV to Intraocular Lens Materials in Pseudophakic Human Autopsy Eyes. Part 1: Histological Sections. J. Cataract Refract. Surg. 2000, 26, 1792–1806. [Google Scholar] [CrossRef]
  47. Linnola, R.J. Sandwich Theory: Bioactivity-Based Explanation for Posterior Capsule Opacification. J. Cataract Refract. Surg. 1997, 23, 1539–1542. [Google Scholar] [CrossRef]
  48. Heatley, C.J.; Spalton, D.J.; Kumar, A.; Jose, R.; Boyce, J.; Bender, L.E. Comparison of Posterior Capsule Opacification Rates between Hydrophilic and Hydrophobic Single-Piece Acrylic Intraocular Lenses. J. Cataract Refract. Surg. 2005, 31, 718–724. [Google Scholar] [CrossRef]
  49. Bertrand, V.; Bozukova, D.; Svaldo Lanero, T.; Huang, Y.-S.; Schol, D.; Rosière, N.; Grauwels, M.; Duwez, A.-S.; Jérôme, C.; Pagnoulle, C.; et al. Biointerface Multiparametric Study of Intraocular Lens Acrylic Materials. J. Cataract Refract. Surg. 2014, 40, 1536–1544. [Google Scholar] [CrossRef]
  50. Katayama, Y.; Kobayakawa, S.; Yanagawa, H.; Tochikubo, T. The Relationship between the Adhesion Characteristics of Acrylic Intraocular Lens Materials and Posterior Capsule Opacification. Ophthalmic Res. 2007, 39, 276–281. [Google Scholar] [CrossRef]
  51. Jaitli, A.; Roy, J.; Chatila, A.; Liao, J.; Tang, L. Role of Fibronectin and IOL Surface Modification in IOL: Lens Capsule Interactions. Exp. Eye Res. 2022, 221, 109135. [Google Scholar] [CrossRef]
  52. Arita, T.; Lin, L.R.; Susan, S.R.; Reddy, V.N. Enhancement of Differentiation of Human Lens Epithelium in Tissue Culture by Changes in Cell-Substrate Adhesion. Investig. Ophthalmol. Vis. Sci. 1990, 31, 2395–2404. [Google Scholar]
  53. Matsushima, H.; Iwamoto, H.; Mukai, K.; Obara, Y. Active Oxygen Processing for Acrylic Intraocular Lenses to Prevent Posterior Capsule Opacification. J. Cataract Refract. Surg. 2006, 32, 1035–1040. [Google Scholar] [CrossRef]
  54. Nakanishi, J.; Kikuchi, Y.; Takarada, T.; Nakayama, H.; Yamaguchi, K.; Maeda, M. Photoactivation of a Substrate for Cell Adhesion under Standard Fluorescence Microscopes. J. Am. Chem. Soc. 2004, 126, 16314–16315. [Google Scholar] [CrossRef]
  55. Farukhi, A.M.; Werner, L.; Kohl, J.C.; Gardiner, G.L.; Ford, J.R.; Cole, S.C.; Vasavada, S.A.; Noristani, R.; Mamalis, N. Evaluation of Uveal and Capsule Biocompatibility of a Single-Piece Hydrophobic Acrylic Intraocular Lens with Ultraviolet–Ozone Treatment on the Posterior Surface. J. Cataract Refract. Surg. 2015, 41, 1081–1087. [Google Scholar] [CrossRef]
  56. Ruoslahti, E.; Pierschbacher, M.D. New Perspectives in Cell Adhesion: RGD and Integrins. Science 1987, 238, 491–497. [Google Scholar] [CrossRef]
  57. Danhier, F.; Le Breton, A.; Préat, V. RGD-Based Strategies to Target Alpha(v) Beta(3) Integrin in Cancer Therapy and Diagnosis. Mol. Pharm. 2012, 9, 2961–2973. [Google Scholar] [CrossRef]
  58. Huang, Y.-S.; Bertrand, V.; Bozukova, D.; Pagnoulle, C.; Labrugère, C.; De Pauw, E.; De Pauw-Gillet, M.-C.; Durrieu, M.-C. RGD Surface Functionalization of the Hydrophilic Acrylic Intraocular Lens Material to Control Posterior Capsular Opacification. PLoS ONE 2014, 9, e114973. [Google Scholar] [CrossRef] [Green Version]
  59. Ruoslahti, E. RGD and Other Recognition Sequences for Integrins. Annu. Rev. Cell. Dev. Biol. 1996, 12, 697–715. [Google Scholar] [CrossRef]
  60. Nishi, O.; Nishi, K.; Wickström, K. Preventing Lens Epithelial Cell Migration Using Intraocular Lenses with Sharp Rectangular Edges. J. Cataract Refract. Surg. 2000, 26, 1543–1549. [Google Scholar] [CrossRef]
  61. Cheng, J.; Wei, R.; Cai, J.; Xi, G.; Zhu, H.; Li, Y.; Ma, X. Efficacy of Different Intraocular Lens Materials and Optic Edge Designs in Preventing Posterior Capsular Opacification: A Meta-Analysis. Am. J. Ophthalmol. 2007, 143, 428–436. [Google Scholar] [CrossRef]
  62. Kohnen, T.; Fabian, E.; Gerl, R.; Hunold, W.; Hütz, W.; Strobel, J.; Hoyer, H.; Mester, U. Optic Edge Design as Long-Term Factor for Posterior Capsular Opacification Rates. Ophthalmology 2008, 115, 1308–1313, 1314.e1–3. [Google Scholar] [CrossRef]
  63. McHugh, K.J.; Saint-Geniez, M.; Tao, S.L. Topographical Control of Ocular Cell Types for Tissue Engineering: Topographical Control of Ocular Cell Types. J. Biomed. Mater. Res. 2013, 101, 1571–1584. [Google Scholar] [CrossRef] [Green Version]
  64. Xia, N.; Thodeti, C.K.; Hunt, T.P.; Xu, Q.; Ho, M.; Whitesides, G.M.; Westervelt, R.; Ingber, D.E. Directional Control of Cell Motility through Focal Adhesion Positioning and Spatial Control of Rac Activation. FASEB J. 2008, 22, 1649–1659. [Google Scholar] [CrossRef] [Green Version]
  65. Magin, C.M.; May, R.M.; Drinker, M.C.; Cuevas, K.H.; Brennan, A.B.; Reddy, S.T. Micropatterned Protective Membranes Inhibit Lens Epithelial Cell Migration in Posterior Capsule Opacification Model. Trans. Vis. Sci. Technol. 2015, 4, 9. [Google Scholar] [CrossRef] [Green Version]
  66. Kramer, G.D.; Werner, L.; MacLean, K.; Farukhi, A.; Gardiner, G.L.; Mamalis, N. Evaluation of Stability and Capsular Bag Opacification with a Foldable Intraocular Lens Coupled with a Protective Membrane in the Rabbit Model. J. Cataract Refract. Surg. 2015, 41, 1738–1744. [Google Scholar] [CrossRef]
  67. Ellis, N.; Werner, L.; Balendiran, V.; Shumway, C.; Jiang, B.; Mamalis, N. Posterior Capsule Opacification Prevention by an Intraocular Lens Incorporating a Micropatterned Membrane on the Posterior Surface. J. Cataract Refract. Surg. 2020, 46, 6. [Google Scholar] [CrossRef]
  68. Ranella, A.; Barberoglou, M.; Bakogianni, S.; Fotakis, C.; Stratakis, E. Tuning Cell Adhesion by Controlling the Roughness and Wettability of 3D Micro/Nano Silicon Structures. Acta Biomater. 2010, 6, 2711–2720. [Google Scholar] [CrossRef]
  69. Lee, B.L.-P.; Jeon, H.; Wang, A.; Yan, Z.; Yu, J.; Grigoropoulos, C.; Li, S. Femtosecond Laser Ablation Enhances Cell Infiltration into Three-Dimensional Electrospun Scaffolds. Acta Biomater. 2012, 8, 2648–2658. [Google Scholar] [CrossRef] [Green Version]
  70. Jeon, H.; Koo, S.; Reese, W.M.; Loskill, P.; Grigoropoulos, C.P.; Healy, K.E. Directing Cell Migration and Organization via Nanocrater-Patterned Cell-Repellent Interfaces. Nat. Mater. 2015, 14, 918–923. [Google Scholar] [CrossRef] [Green Version]
  71. Simitzi, C.; Efstathopoulos, P.; Kourgiantaki, A.; Ranella, A.; Charalampopoulos, I.; Fotakis, C.; Athanassakis, I.; Stratakis, E.; Gravanis, A. Laser Fabricated Discontinuous Anisotropic Microconical Substrates as a New Model Scaffold to Control the Directionality of Neuronal Network Outgrowth. Biomaterials 2015, 67, 115–128. [Google Scholar] [CrossRef] [PubMed]
  72. Jun, I.; Chung, Y.-W.; Heo, Y.-H.; Han, H.-S.; Park, J.; Jeong, H.; Lee, H.; Lee, Y.B.; Kim, Y.-C.; Seok, H.-K.; et al. Creating Hierarchical Topographies on Fibrous Platforms Using Femtosecond Laser Ablation for Directing Myoblasts Behavior. ACS Appl. Mater. Interfaces 2016, 8, 3407–3417. [Google Scholar] [CrossRef] [PubMed]
  73. Seo, Y.; Kim, S.; Lee, H.S.; Park, J.; Lee, K.; Jun, I.; Seo, H.; Kim, Y.J.; Yoo, Y.; Choi, B.C.; et al. Femtosecond Laser Induced Nano-Textured Micropatterning to Regulate Cell Functions on Implanted Biomaterials. Acta Biomater. 2020, 116, 138–148. [Google Scholar] [CrossRef] [PubMed]
  74. Li, J.; Zhang, W.; Ji, W.; Wang, J.; Wang, N.; Wu, W.; Wu, Q.; Hou, X.; Hu, W.; Li, L. Near Infrared Photothermal Conversion Materials: Mechanism, Preparation, and Photothermal Cancer Therapy Applications. J. Mater. Chem. B 2021, 9, 7909–7926. [Google Scholar] [CrossRef]
  75. Ye, Y.; He, J.; Qiao, Y.; Qi, Y.; Zhang, H.; Santos, H.A.; Zhong, D.; Li, W.; Hua, S.; Wang, W.; et al. Mild Temperature Photothermal Assisted Anti-Bacterial and Anti-Inflammatory Nanosystem for Synergistic Treatment of Post-Cataract Surgery Endophthalmitis. Theranostics 2020, 10, 8541–8557. [Google Scholar] [CrossRef]
  76. Lin, Y.-X.; Hu, X.-F.; Zhao, Y.; Gao, Y.-J.; Yang, C.; Qiao, S.-L.; Wang, Y.; Yang, P.-P.; Yan, J.; Sui, X.-C.; et al. Photothermal Ring Integrated Intraocular Lens for High-Efficient Eye Disease Treatment-Supply. Adv. Mater. 2017, 29, 1701617. [Google Scholar] [CrossRef]
  77. Xu, J.; Yao, K.; Xu, Z. Nanomaterials with a Photothermal Effect for Antibacterial Activities: An Overview. Nanoscale 2019, 11, 8680–8691. [Google Scholar] [CrossRef]
  78. Xu, J.; Li, H.; Hu, D.; Zhang, X.; Wang, W.; Ji, J.; Xu, Z.; Yao, K. Intraocular Lens with Mussel-Inspired Coating for Preventing Posterior Capsule Opacification via Photothermal Effect. ACS Appl. Bio Mater. 2021, 4, 3579–3586. [Google Scholar] [CrossRef]
  79. Yang, K.; Feng, L.; Shi, X.; Liu, Z. Nano-Graphene in Biomedicine: Theranostic Applications. Chem. Soc. Rev. 2013, 42, 530–547. [Google Scholar] [CrossRef]
  80. Dash, B.S.; Jose, G.; Lu, Y.-J.; Chen, J.-P. Functionalized Reduced Graphene Oxide as a Versatile Tool for Cancer Therapy. Int. J. Mol. Sci. 2021, 22, 2989. [Google Scholar] [CrossRef]
  81. Robinson, J.T.; Tabakman, S.M.; Liang, Y.; Wang, H.; Casalongue, H.S.; Vinh, D.; Dai, H. Ultrasmall Reduced Graphene Oxide with High Near-Infrared Absorbance for Photothermal Therapy. J. Am. Chem. Soc. 2011, 133, 6825–6831. [Google Scholar] [CrossRef]
  82. An, W.; Zhang, Y.; Zhang, X.; Li, K.; Kang, Y.; Akhtar, S.; Sha, X.; Gao, L. Ocular Toxicity of Reduced Graphene Oxide or Graphene Oxide Exposure in Mouse Eyes. Exp. Eye Res. 2018, 174, 59–69. [Google Scholar] [CrossRef]
  83. Zhang, C.; Guo, Q.; Tong, Z.; Chen, S.; Mao, Z.; Yu, Y. Thin Film Nanoarchitectonics of Layer-by-Layer Assembly with Reduced Graphene Oxide on Intraocular Lens for Photothermal Therapy of Posterior Capsular Opacification. J. Colloid Interface Sci. 2022, 619, 348–358. [Google Scholar] [CrossRef]
  84. Mao, Y.; Yu, S.; Kang, Y.; Zhang, D.; Wu, S.; Zhang, J.; Xiong, Y.; Li, M.; Zhang, J.; Wang, J.; et al. CuInS/ZnS Quantum Dots Modified Intraocular Lens for Photothermal Therapy of Posterior Capsule Opacification. Exp. Eye Res. 2021, 202, 108282. [Google Scholar] [CrossRef]
  85. Mao, Y.; Li, M.; Wang, J.; Wang, K.; Zhang, J.; Chen, S.; Liu, X.; Liang, Q.; Gao, F.; Wan, X. NIR-Triggered Drug Delivery System for Chemo-Photothermal Therapy of Posterior Capsule Opacification. J. Control. Release 2021, 339, 391–402. [Google Scholar] [CrossRef]
  86. Zhang, Z.; Huang, W.; Lei, M.; He, Y.; Yan, M.; Zhang, X.; Zhao, C. Laser-Triggered Intraocular Implant to Induce Photodynamic Therapy for Posterior Capsule Opacification Prevention. Int. J. Pharm. 2016, 498, 1–11. [Google Scholar] [CrossRef]
  87. Tang, J.; Liu, S.; Han, Y.; Wang, R.; Xia, J.; Chen, H.; Lin, Q. Surface Modification of Intraocular Lenses via Photodynamic Coating for Safe and Effective PCO Prevention. J. Mater. Chem. B 2021, 9, 1546–1556. [Google Scholar] [CrossRef]
  88. Qie, J.; Wen, S.; Han, Y.; Liu, S.; Shen, L.; Chen, H.; Lin, Q. A Polydopamine-Based Photodynamic Coating on the Intraocular Lens Surface for Safer Posterior Capsule Opacification Conquering. Biomater. Sci. 2022, 10, 2188–2197. [Google Scholar] [CrossRef]
  89. Correia, J.H.; Rodrigues, J.A.; Pimenta, S.; Dong, T.; Yang, Z. Photodynamic Therapy Review: Principles, Photosensitizers, Applications, and Future Directions. Pharmaceutics 2021, 13, 1332. [Google Scholar] [CrossRef]
  90. Koh, H.J.; Kang, S.J.; Lim, S.J.; Chu, Y.K.; Lee, S.C.; Kwon, O.W.; Kim, H.B. The Effect of Photodynamic Therapy with Rose Bengal on Posterior Capsule Opacification in Rabbit Eyes. Ophthalmic Res. 2002, 34, 107–112. [Google Scholar] [CrossRef]
  91. Van Tenten, Y.; Schuitmaker, H.J.; De Groot, V.; Willekens, B.; Vrensen, G.F.J.M.; Tassignon, M.-J. A Preliminary Study on the Prevention of Posterior Capsule Opacification by Photodynamic Therapy with Bacteriochlorin A in Rabbits. Ophthalmic Res. 2002, 34, 113–118. [Google Scholar] [CrossRef]
  92. Jiang, J.; Shihan, M.H.; Wang, Y.; Duncan, M.K. Lens Epithelial Cells Initiate an Inflammatory Response Following Cataract Surgery. Investig. Ophthalmol. Vis. Sci. 2018, 59, 4986–4997. [Google Scholar] [CrossRef] [Green Version]
  93. Chandler, H.L.; Barden, C.A.; Lu, P.; Kusewitt, D.F.; Colitz, C.M.H. Prevention of Posterior Capsular Opacification through Cyclooxygenase-2 Inhibition. Mol. Vis. 2007, 13, 677–691. [Google Scholar]
  94. Davis, J.L.; Yi, N.Y.; Salmon, J.H.; Charlton, A.N.; Colitz, C.M.H.; Gilger, B.C. Sustained-Release Celecoxib from Incubated Acrylic Intraocular Lenses Suppresses Lens Epithelial Cell Growth in an Ex Vivo Model of Posterior Capsule Opacity. J. Ocul. Pharmacol. Ther. 2012, 28, 359–368. [Google Scholar] [CrossRef] [Green Version]
  95. Brookshire, H.L.; English, R.V.; Nadelstein, B.; Weigt, A.K.; Gift, B.W.; Gilger, B.C. Efficacy of COX-2 Inhibitors in Controlling Inflammation and Capsular Opacification after Phacoemulsification Cataract Removal. Vet. Ophthalmol. 2015, 18, 175–185. [Google Scholar] [CrossRef]
  96. Zhang, X.; Lai, K.; Li, S.; Wang, J.; Li, J.; Wang, W.; Ni, S.; Lu, B.; Grzybowski, A.; Ji, J.; et al. Drug-Eluting Intraocular Lens with Sustained Bromfenac Release for Conquering Posterior Capsular Opacification. Bioact. Mater. 2021, 9, 343–357. [Google Scholar] [CrossRef]
  97. Huang, X.; Wang, Y.; Cai, J.; Ma, X.; Li, Y.; Cheng, J.; Wei, R. Sustained Release of 5-Fluorouracil from Chitosan Nanoparticles Surface Modified Intra Ocular Lens to Prevent Posterior Capsule Opacification: An In Vitro and In Vivo Study. J. Ocul. Pharmacol. Ther. 2013, 29, 208–215. [Google Scholar] [CrossRef]
  98. Han, Y.; Tang, J.; Xia, J.; Wang, R.; Qin, C.; Liu, S.; Zhao, X.; Chen, H.; Lin, Q. Anti-Adhesive and Antiproliferative Synergistic Surface Modification of Intraocular Lens for Reduced Posterior Capsular Opacification. Int. J. Nanomed. 2019, 14, 9047–9061. [Google Scholar] [CrossRef] [Green Version]
  99. Liu, S.; Zhao, X.; Tang, J.; Han, Y.; Lin, Q. Drug-Eluting Hydrophilic Coating Modification of Intraocular Lens via Facile Dopamine Self-Polymerization for Posterior Capsular Opacification Prevention. ACS Biomater. Sci. Eng. 2021, 7, 1065–1073. [Google Scholar] [CrossRef]
  100. Huang, H.; Zhu, S.; Liu, D.; Wen, S.; Lin, Q. Antiproliferative Drug-Loaded Multi-Functionalized Intraocular Lens for Reducing Posterior Capsular Opacification. J. Biomater. Sci. Polym. Ed. 2021, 32, 735–748. [Google Scholar] [CrossRef]
  101. Wertheimer, C.; Kueres, A.; Siedlecki, J.; Braun, C.; Kassumeh, S.; Wolf, A.; Mayer, W.; Priglinger, C.; Priglinger, S.; Eibl-Lindner, K. The Intraocular Lens as a Drug Delivery Device for an Epidermal Growth Factor–Receptor Inhibitor for Prophylaxis of Posterior Capsule Opacification. Acta Ophthalmol. 2018, 96, e874–e882. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  102. Kassumeh, S.; Kueres, A.; Hillenmayer, A.; von Studnitz, A.; Elhardt, C.; Ohlmann, A.; Priglinger, S.G.; Wertheimer, C.M. Development of a Drug-Eluting Intraocular Lens to Deliver Epidermal Growth Factor Receptor Inhibitor Gefitinib for Posterior Capsule Opacification Prophylaxis. Eur. J. Ophthalmol. 2021, 31, 436–444. [Google Scholar] [CrossRef] [PubMed]
  103. Teng, H.; Zhang, H.; Tian, F.; Gu, H.Q.; Liu, X.; Sun, J. The study of cyclosporin A modified intraocular lens preventing posterior capsular opacification in rabbit eyes. Zhonghua Yan Ke Za Zhi 2016, 52, 110–116. [Google Scholar] [CrossRef] [PubMed]
  104. Lu, D.; Han, Y.; Liu, D.; Chen, S.; Qie, J.; Qu, J.; Lin, Q. Centrifugally Concentric Ring-Patterned Drug-Loaded Polymeric Coating as an Intraocular Lens Surface Modification for Efficient Prevention of Posterior Capsular Opacification. Acta Biomater. 2021, 128, 327–341. [Google Scholar] [CrossRef] [PubMed]
  105. Liu, H.; Zhang, Y.; Ma, H.; Zhang, C.; Fu, S. Comparison of Posterior Capsule Opacification in Rabbit Eyes Receiving Different Administrations of Rapamycin. Graefe’s Arch. Clin. Exp. Ophthalmol. 2014, 252, 1111–1118. [Google Scholar] [CrossRef]
  106. Ongkasin, K.; Masmoudi, Y.; Wertheimer, C.M.; Hillenmayer, A.; Eibl-Lindner, K.H.; Badens, E. Supercritical Fluid Technology for the Development of Innovative Ophthalmic Medical Devices: Drug Loaded Intraocular Lenses to Mitigate Posterior Capsule Opacification. Eur. J. Pharm. Biopharm. 2020, 149, 248–256. [Google Scholar] [CrossRef]
  107. Lee, E.H.; Joo, C.K. Role of Transforming Growth Factor-Beta in Transdifferentiation and Fibrosis of Lens Epithelial Cells. Investig. Ophthalmol. Vis. Sci. 1999, 40, 2025–2032. [Google Scholar]
  108. Sun, C.; Teng, W.; Cui, J.; Huang, X.; Yao, K. The Effect of Anti-TGF-Β2 Antibody Functionalized Intraocular Lens on Lens Epithelial Cell Migration and Epithelial–Mesenchymal Transition. Colloids Surf. B Biointerfaces 2014, 113, 33–42. [Google Scholar] [CrossRef]
Figure 1. (a) The structure of a human eye. Adapted with permission from Ref. [10]. Copyright 2015 Elsevier. (b) The structure of a human lens. Adapted with permission from Ref. [1]. Copyright 2017 Elsevier. (c) The PCO development following cataract surgery. Adapted with permission from Ref. [5]. Copyright 2021 Elsevier.
Figure 1. (a) The structure of a human eye. Adapted with permission from Ref. [10]. Copyright 2015 Elsevier. (b) The structure of a human lens. Adapted with permission from Ref. [1]. Copyright 2017 Elsevier. (c) The PCO development following cataract surgery. Adapted with permission from Ref. [5]. Copyright 2021 Elsevier.
Pharmaceutics 14 01343 g001
Figure 2. Schematic illustration of the main types of IOLs used for PCO prophylaxis.
Figure 2. Schematic illustration of the main types of IOLs used for PCO prophylaxis.
Pharmaceutics 14 01343 g002
Figure 3. Schematic illustration of the (NT + LLL)-IOL with advantages of anti-bio-adhesion and PCO inhibition, compared to the pristine IOL. Adapted with permission from Ref. [43]. Copyright 2021 Elsevier.
Figure 3. Schematic illustration of the (NT + LLL)-IOL with advantages of anti-bio-adhesion and PCO inhibition, compared to the pristine IOL. Adapted with permission from Ref. [43]. Copyright 2021 Elsevier.
Pharmaceutics 14 01343 g003
Figure 4. Schematic illustration of nano-textured micro-patterning on intraocular lens to suppress posterior capsular opacification by regulating cell behavior, such as adhesion, migration, and proliferation. Adapted with permission from Ref. [73]. Copyright 2020 Elsevier.
Figure 4. Schematic illustration of nano-textured micro-patterning on intraocular lens to suppress posterior capsular opacification by regulating cell behavior, such as adhesion, migration, and proliferation. Adapted with permission from Ref. [73]. Copyright 2020 Elsevier.
Pharmaceutics 14 01343 g004
Figure 5. The schematic illustration of nano-IOLs with nanostructured Au@SiO2 outer rim for prevention of posterior capsule opacification. Adapted with permission from Ref. [76]. Copyright 2017 John Wiley and Sons.
Figure 5. The schematic illustration of nano-IOLs with nanostructured Au@SiO2 outer rim for prevention of posterior capsule opacification. Adapted with permission from Ref. [76]. Copyright 2017 John Wiley and Sons.
Pharmaceutics 14 01343 g005
Figure 6. The schematic illustration of BP-based drug delivery system for synergistic chemo-photothermal therapy of PCO. Adapted with permission from Ref. [85]. Copyright 2021 Elsevier.
Figure 6. The schematic illustration of BP-based drug delivery system for synergistic chemo-photothermal therapy of PCO. Adapted with permission from Ref. [85]. Copyright 2021 Elsevier.
Pharmaceutics 14 01343 g006
Figure 7. (a) Schematic illustration of an IOL with PS-containing coating and the process of PDT. (b) Schematic of the surface coating structure of the IOL. (c) Chemical structure of α-CD, Ce6, and α-CD-Ce6. Adapted with permission from Ref. [87]. Copyright 2021 Royal Society of Chemistry.
Figure 7. (a) Schematic illustration of an IOL with PS-containing coating and the process of PDT. (b) Schematic of the surface coating structure of the IOL. (c) Chemical structure of α-CD, Ce6, and α-CD-Ce6. Adapted with permission from Ref. [87]. Copyright 2021 Royal Society of Chemistry.
Pharmaceutics 14 01343 g007
Figure 8. Schematic illustration of intraocular lens modified by centrifugally concentric ring-patterned drug-loaded PLGA coating for posterior capsular opacification prevention. Adapted with permission from Ref. [104]. Copyright 2022 Elsevier.
Figure 8. Schematic illustration of intraocular lens modified by centrifugally concentric ring-patterned drug-loaded PLGA coating for posterior capsular opacification prevention. Adapted with permission from Ref. [104]. Copyright 2022 Elsevier.
Pharmaceutics 14 01343 g008
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Zhang, Y.; Zhang, C.; Chen, S.; Hu, J.; Shen, L.; Yu, Y. Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification. Pharmaceutics 2022, 14, 1343. https://doi.org/10.3390/pharmaceutics14071343

AMA Style

Zhang Y, Zhang C, Chen S, Hu J, Shen L, Yu Y. Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification. Pharmaceutics. 2022; 14(7):1343. https://doi.org/10.3390/pharmaceutics14071343

Chicago/Turabian Style

Zhang, Yidong, Chengshou Zhang, Silong Chen, Jianghua Hu, Lifang Shen, and Yibo Yu. 2022. "Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification" Pharmaceutics 14, no. 7: 1343. https://doi.org/10.3390/pharmaceutics14071343

APA Style

Zhang, Y., Zhang, C., Chen, S., Hu, J., Shen, L., & Yu, Y. (2022). Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification. Pharmaceutics, 14(7), 1343. https://doi.org/10.3390/pharmaceutics14071343

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop