Next Article in Journal
Lightweight Body in White Design Using Topology-, Shapeand Size Optimisation
Previous Article in Journal
Factors Determining the Manufacturing Costs of Lithium-Ion Batteries for PHEVs
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
WEVJ
Volume 6
Issue 3
10.3390/wevj6030629
wevj-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
World Electric Vehicle Journal is published by MDPI from Volume 9 issue 1 (2018). Previous articles were published by The World Electric Vehicle Association (WEVA) and its member the European Association for e-Mobility (AVERE), the Electric Drive Transportation Association (EDTA), and the Electric Vehicle Association of Asia Pacific (EVAAP). They are hosted by MDPI on mdpi.com as a courtesy and upon agreement with AVERE.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Development of 2D Thermal Battery Model for Lithium-ion Pouch Cells

by
Ahmadou Ahmadou Samba
1,2,*,
Noshin Omar
2,
Hamid Gualous
1,
Peter Van den Bossche
2,
Joeri Van Mierlo
2 and
Tala Ighil Boubekeur
1
1
Université de Caen Basse Normandie, Rue Louis Aragon, 50130 Cherbourg-Octeville, France
2
Vrije Universiteit Brussel, Pleinlaan 2, 1050, Brussels, Belgium
*
Author to whom correspondence should be addressed.
World Electr. Veh. J. 2013, 6(3), 629-637; https://doi.org/10.3390/wevj6030629
Published: 27 September 2013
Versions Notes

Abstract

This paper represents a simulation model for a 2D-thermal model applied on a Lithium-ion pouch battery. This model is able to describe the transient response of the thermal distribution accurately. The heat generation parameters used in this model have been obtained experimentally from dedicated estimation technique. The experimental and simulation are performed at different charge and discharge current rates. The experimental results are in good agreement with the developed model. The battery thermal distributions using natural and forced convection cooling are studied.
Keywords: Lithium-ion battery; Pouch cell; Entropy; Resistance; Temperature distribution; ANSYS®; Thermal imager Lithium-ion battery; Pouch cell; Entropy; Resistance; Temperature distribution; ANSYS®; Thermal imager

Share and Cite

MDPI and ACS Style

Ahmadou Samba, A.; Omar, N.; Gualous, H.; Van den Bossche, P.; Van Mierlo, J.; Boubekeur, T.I. Development of 2D Thermal Battery Model for Lithium-ion Pouch Cells. World Electr. Veh. J. 2013, 6, 629-637. https://doi.org/10.3390/wevj6030629

AMA Style

Ahmadou Samba A, Omar N, Gualous H, Van den Bossche P, Van Mierlo J, Boubekeur TI. Development of 2D Thermal Battery Model for Lithium-ion Pouch Cells. World Electric Vehicle Journal. 2013; 6(3):629-637. https://doi.org/10.3390/wevj6030629

Chicago/Turabian Style

Ahmadou Samba, Ahmadou, Noshin Omar, Hamid Gualous, Peter Van den Bossche, Joeri Van Mierlo, and Tala Ighil Boubekeur. 2013. "Development of 2D Thermal Battery Model for Lithium-ion Pouch Cells" World Electric Vehicle Journal 6, no. 3: 629-637. https://doi.org/10.3390/wevj6030629

APA Style

Ahmadou Samba, A., Omar, N., Gualous, H., Van den Bossche, P., Van Mierlo, J., & Boubekeur, T. I. (2013). Development of 2D Thermal Battery Model for Lithium-ion Pouch Cells. World Electric Vehicle Journal, 6(3), 629-637. https://doi.org/10.3390/wevj6030629

Article Metrics

Back to TopTop