Next Article in Journal
Experimental Investigation and Optimization of Turning Polymers Using RSM, GA, Hybrid FFD-GA, and MOGA Methods
Next Article in Special Issue
Vibrational Emission Study of the CN and C2 in Nylon and ZnO/Nylon Polymer Using Laser-Induced Breakdown Spectroscopy (LIBS)
Previous Article in Journal
Oral Microbiome in Orthodontic Acrylic Retainer
Previous Article in Special Issue
An Optical Algorithm for Relative Thickness of Each Monochrome Component in Multilayer Transparent Mixed Films
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Polymers
Volume 14
Issue 17
10.3390/polym14173584
polymers-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts

by
Mingpan Zhang
1,†,
Fuli Wang
1,†,
Xinran Shi
1,
Jing Wei
1,
Weixia Yan
1,
Yihang Dong
2,
Huiqiang Hu
3,* and
Kai Wei
1,*
1
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China
2
Suzhou Best Color Nanotechnology Co., Ltd., Suzhou 215000, China
3
Guangzhou Inspection Testing and Certification Group Co., Ltd., Guangzhou 511447, China
*
Authors to whom correspondence should be addressed.
†
These authors contribute equally to this work.
Polymers 2022, 14(17), 3584; https://doi.org/10.3390/polym14173584
Submission received: 24 July 2022 / Revised: 21 August 2022 / Accepted: 26 August 2022 / Published: 30 August 2022
(This article belongs to the Special Issue Smart Textile and Polymer Materials)
Browse Figures
Review Reports Versions Notes

Abstract

:
In this study, an iron oxide/carbon nanofibers (Fe2O3/CNFs) composite was prepared by a combination of electrospinning and hydrothermal methods. The characterization of Fe2O3/CNFs was achieved via scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It is shown that when the hydrothermal reaction time was 180 °C and the reaction time was 1 h, the Fe2O3 nanoparticle size was about 90 nm with uniform distribution. The photodegradation performance applied to decolorize methyl orange (MO) was investigated by forming a heterogeneous Fenton catalytic system with hydrogen peroxide. The reaction conditions for the degradation of MO were optimized with the decolorization rate up to more than 99% within 1 h, which can decompose the dyes in water effectively. The degradation process of MO by Fenton oxidation was analyzed by a UV-visible NIR spectrophotometer, and the reaction mechanism was speculated as well.

1. Introduction

Dyes are commonly used in modern industries, such as textile, food, paper, printing, leather, and cosmetics. They will cause serious pollution problems and bring risks to human health, such as carcinogenesis and kidney dysfunction, if discharged directly into the natural environment without treatment [1,2,3]. Therefore, how to remove organic dyes from wastewater effectively has become a hot research issue in recent years [4].
Currently, the treatment of printing and dyeing wastewater can be divided into adsorption technologies [5,6,7], advanced oxidation technologies, such as Fenton oxidation [8,9,10,11,12,13] and ozone oxidation [14,15], biological technologies, such as bacterial [16,17], fungal [18,19], and algal [20] treatment, membrane separation technologies, such as ultrafiltration, nanofiltration, reverse osmosis and electrodialysis [21,22], electro-Fenton, anodicoxidation [23], electrocoagulation electrochemical treatment techniques, ion exchange [24,25,26] and some multiple processes [27,28,29,30,31]. Fenton oxidation is reported to be one of the most widely studied and applied advanced oxidation technologies. It can completely degrade the refractory toxic and hazardous organic compounds into water and carbon dioxide with a short treatment cycle.
The conventional Fenton technique uses ferrous salts, but some iron-containing oxides, such as Fe2O3, can be used instead of ferrous salts. It was shown previously that composites containing Fe2O3 can effectively degrade a large number of organic compounds in wastewater [32,33,34,35,36,37,38]. There are kinds of methods that could prepare Fe2O3, mainly the co-precipitation method, solution-gel method, micro-emulsion method, solvothermal method, hydrothermal method, etc. Among them, the hydrothermal method can produce nano Fe2O3 with high purity, controllable morphology and particle size under mild synthesis conditions. Electrospinning is a simple technique for the effective production of nanofibers. The device is shown in Figure 1. Since carbon nanofibers (CNFs) have a high specific surface area, few structural defects, low density and high conductivity, they can be used as a catalytic template to prevent the agglomeration of nanoparticles which can solve the problem that nano Fe2O3 is prone to agglomeration. In this study, CNFs were obtained after the carbonization of polymethyl methacrylate/polyacrylonitrile (PAN/PMMA) nanofibers and used as template materials. In addition, Fe2O3/CNFs composites were prepared by the hydrothermal method with high purity, controlled morphological particle size, and uniform dispersibility. Then, the Fe2O3/CNFs composites were used in the Fenton reaction to degrade the MO solution.

2. Experimental Methods

2.1. Materials

Polyacrylonitrile (PAN) (Mw 150,000) was purchased from Shanghai Maclean. Polymethyl methacrylate (PMMA) (high flow type) was purchased from Shanghai Maclean. N, N-dimethylformamide (DMF) (AR) was purchased from Shanghai SiXin Bio. Ferric chloride hexahydrate (FeCl3·6H2O) (EP) was purchased from 3A chemicals. Urea (AR) was purchased from Genbio. Glycine (AR) was purchased from Genbio. Polyethylene glycol 1000 monomethyl ether was purchased from Aladdin. Ethanol (AR) was purchased from Shanghai Chemical Reagent Procurement and Supply Station. Methyl orange (MO) (AR) was purchased from Shanghai Aladdin Technology & Biochemistry. All reagents and solvents were used without further purification.

2.2. Preparation of Carbon Nanofiber Membrane

PAN and PMMA were added to DMF for dissolution (the mass ratio of PAN and PMMA was 4:6, and the concentration of the spinning solution was 20%), and the spinning solution was prepared by stirring at room temperature for 24 h. The spinning solution was ultrasonicated for 2 h and spun by an electrospinning machine. The spinning time was 24 h. Then, the above nanofiber film was put into a tube furnace and pre-oxidized in the air for 1 h. After the pre-oxidation, it was continued to be carbonized in nitrogen for 1 h. After the tube furnace was naturally cooled to room temperature, carbon nanofibers were obtained.

2.3. Preparation of Fe2O3/CNFs Composites

The Fe2O3/CNFs were prepared by the hydrothermal method. Firstly, 0.16 g FeCl3·6H2O, 0.2 g polyethylene glycol, 0.484 g urea and 0.03 g glycine were added to 25 mL deionized water. The mixed solution was stirred until it was completely dissolved and then poured into the hydrothermal reactor. Then, 20 mg carbon nanofiber membranes were added to the hydrothermal reactor to make them uniformly dispersed in the solution. The reaction was carried out at a certain temperature for a while to obtain Fe2O3/CNFs composites.
To explore the influence of hydrothermal reaction time and temperature on iron oxide particles, the following experiments were set up:
(1)
The hydrothermal reaction time was 1 h, and the reaction temperatures were 130 °C, 140 °C, 150 °C, 160 °C, 170 °C and 180 °C, respectively.
(2)
The hydrothermal reaction temperature was 180 °C, and the reaction time was 1 h, 2 h, 3 h, 4 h, 5 h and 6 h, respectively.
Under visible light conditions, Fe2O3/CNFs were used as a catalyst for the degradation of MO.

2.4. Characterization

The surface structures of the composites were observed by scanning electron microscopy (SEM, s-4800) (Hitachi Manufacturing, Tokyo, Japan). The crystal structure of the composites was characterized by X-ray diffraction (XRD) (X’ Pert-Pro MRD, Panaco, The Netherlands). The functional groups of the composites were determined by infrared spectroscopy (IR) (Nikoli Instruments Manufacturing, Waltham, Massachusetts, USA). The chemical composition of the composites was examined by energy dispersive spectroscopy (EDS) (Hitachi Manufacturing, Tokyo, Japan) and by X-ray photoelectron spectroscopy (XPS) using Axis Ultra HAS equipment.

2.5. Degradation Experiments

A total of 100 mg/L MO solution was prepared, and the pH of the solution was 7.4. Then the degradation experiments were carried out as follows:
(1)
Effect of reaction temperature: Fe2O3/CNFs composite is 0.8 g/L, the concentration of hydrogen peroxide is 0.194 mol/L, and the reaction time is 0~120 min. The reaction temperatures are 50 °C, 60 °C, 70 °C and 80 °C, respectively.
(2)
Effect of the amount of Fe2O3/CNFs composite: The initial concentration of hydrogen peroxide is 0.194 mol/L, the reaction temperature is 80 °C, and the reaction time is 0~120 min. The amounts of the Fe2O3/CNFs composite are 0.4 g/L, 0.6 g/L, 0.8 g/L and 1.0 g/L, respectively.
(3)
Effect of initial concentration of hydrogen peroxide: Fe2O3/CNFs composite is 0.8 g/L, the reaction temperature is 80 °C and the reaction time is 0~240 min. The initial concentrations of hydrogen peroxide are 0.097 mol/L, 0.146 mol/L, 0.194 mol/L, and 0.243 mol/L, respectively.

2.6. Degradation Performance of Fe2O3/CNFs

MO solutions with the concentration of 4 mg/L, 10 mg/L and 40 mg/L (pH ≈ 7.4) were prepared. The UV-Vis spectrums were measured by Cary 5000 UV-vis-NIR spectrophotometer between the wavelengths of 190–600 nm so as to obtain the maximum absorption wavelength.
MO solutions with the concentrations of 4 mg/L, 6 mg/L, 8 mg/L, 10 mg/L, 20 mg/L, 30 mg/L, 40 mg/L, 50 mg/L and 60 mg/L were prepared. The absorbances of MO solutions with different concentrations at the maximum absorption wavelength were measured, and the absorbance concentration standard curve was obtained.
After the degradation experiment, the absorbance of MO was measured at the maximum absorption wavelength. Then the solution concentration was obtained according to the standard curve of MO. The decolorization rate of MO was calculated.
Determination of the decolorization rate of MO: The absorbance of MO solutions with different concentrations at the maximum absorption wavelength was measured and the absorbance–concentration standard curve was obtained. The concentration of MO before degradation was denoted as C0. After the degradation experiment, the absorbance was measured at the maximum absorption wavelength. Then the solution concentration was obtained according to the standard curve, denoted as C1. The decolorization rate was calculated as follows:
C 0 − C 1 C 0 × 100 %

3. Results and Discussion

3.1. Characterization of Fe2O3/CNFs

Figure 2 and Figure 3 are the SEM images of carbon nanofibers and Fe2O3/CNFs prepared under different hydrothermal reaction conditions. From the figures, it can be seen that when the reaction temperature rises to 140 °C, large amounts of nanoparticles were successfully grown on carbon nanofiber. When the temperature is lower than 150 °C, the generated Fe2O3 nanoparticles are uneven, indicating that the hydrothermal reaction temperature affects the fabrication of nanoparticles. Meanwhile, the Fe2O3 particle size gradually increased with the increase in reaction time. It was known that the specific surface area increased as the number of nanoparticles increased, and the particle size became smaller. Furthermore, the catalytic efficiency improved as the specific surface area increased. Therefore, the hydrothermal reaction temperature and time were determined to be 180 °C and 1 h. Under this reaction condition, the Fe2O3 nanoparticle size is around 90 nm and grows evenly on carbon nanofibers.
Figure 4 shows the EDS element analysis chart of the Fe2O3/CNFs composites. From the figure, it can be seen that the Fe elements and O elements are uniformly distributed on the carbon fibers, indicating that the Fe2O3/CNFs composites were successfully prepared by the hydrothermal method.
Figure 5 shows the XRD patterns of Fe2O3/CNFs at different reaction temperatures and times. When the hydrothermal reaction temperature raised to 140 °C, characteristic peaks of Fe2O3 appeared at 2θ = 24.2°, 33.2°, 35.6°, 40.9°, 49.5°, 54.1°, 62.4°, and 64.0°, which are consistent with the standard card mapping card JCPDS NO.33-0664, indicating the formation of Fe2O3 particles [39].
Figure 6 shows the IR spectra of CNFs and Fe2O3/CNFs composites. In the infrared spectrum of CNFs, the characteristic peaks at 3438 cm−1 are caused by −OH bond stretching vibration [40]. The characteristic peaks at 1140 cm−1 and 1537 cm−1 are caused by C−O−C and C=O vibration, respectively [41]. Compared with CNFs, Fe2O3/CNFs composites showed characteristic peaks at 556 cm−1 and 475 cm−1 are caused by the vibrations of Fe-O functional groups [42].
Figure 7 shows the XPS spectra analysis of Fe2O3/CNFs composites. The satellite peak of Fe2O3 at 719.2 eV is detected in Figure 7b, which shows the trivalent Fe elemental in the Fe2O3/CNFs composites. Meanwhile, there are two main peaks at 712.5 eV and 725.4 eV corresponding to Fe 2p3/2 and Fe 2p1/2, indicating the existence of Fe2+ and Fe3+ [43]. Furthermore, the energy spectrum of C 1S is shown in Figure 7c. There are three characteristic peaks. The peak at 284.5 eV is caused by the C−C bond, while the peaks at 285.8 eV and 287.9 eV represent C−O and C=O, respectively [44]. Figure 7d shows the energy spectrum of O1 s. The peak at 531.0 eV represents the O element in Fe2O3 and the peak at 532.7 eV represents the O element in CNFs [43,44]. XPS results show that Fe−O−C chemical bonds exist between Fe2O3 and CNFs. Fe2O3 particles grew in situ on the CNFs carrier, and the results were consistent with the XRD and IR analysis.

3.2. Heterogeneous Fenton Degradation of MO by Fe2O3/CNFs

The MO aqueous solution has the characteristics of an acid–base indicator, and its molecular structure will change with the pH value as well colors. When pH < 3.1, it is the quinone structure and the solution is red, and when pH > 4.4, it is an azo structure and the solution is yellow. The structural changes can be expressed as follows: Polymers 14 03584 i001
Figure 8 shows the UV spectra of MO at a different pH value. When the structure is quinone, the maximum absorption wavelength in the visible region is around 505 nm. When the structure is azo, the maximum absorption wavelength in the visible region is around 465 nm.
The decolorization effect of Fe2O3/CNFs composites on MO under different pH conditions is shown in Figure 9a. The initial pH of the solution has a great influence on the Fe2O3/CNFs composites catalyzing the degradation of MO by hydrogen peroxide. When pH < 3, the decolorization effect of MO is better, and the decolorization rate decreases gradually with the increase in pH. When pH is 6~8, the decolorization rate gradually increases. Furthermore, when pH > 8, the decolorization rate continues to decrease again. The best decolorization of methyl orange was achieved when pH = 2. It may be that the azo bond in the MO molecular structure changes to a quinone structure under the condition of pH < 3, and the destruction of N = N bond leads to the instability of the MO molecular structure, which makes the catalytic reaction easier to proceed. Secondly, due to the over acid condition, Fe2O3 is partially dissolved, more free Fe2+/Fe3+ contacts with H2O2, and more ∙OH is produced, thus improving the decolorization rate of MO [45].
Figure 9b shows the effect of reaction temperature on the catalytic effect of MO. The decolorization rate of MO was improved by increasing the reaction temperature. When the temperature increased from 50 °C to 80 °C, the decolorization rate of MO increased from 66.39% to 99.87%. Moreover, the increase in reaction temperature can effectively shorten the degradation time.
The heterogeneous Fenton reaction occurs on the surface of the catalyst, and the amount of catalyst is an important factor, affecting the decolorization effect. The catalytic effect of Fe2O3/CNFs amount on MO is shown in Figure 9c. When the amount of catalyst increased from 0.4 g/L to 0.8 g/L, the decolorization rates of MO increased from 78.5% to 97.31%. Increasing the dosage of Fe2O3/CNFs has a facilitating effect on the decolorization of MO. This is because increasing the amount of catalyst can increase the number of active sites on the surface of the catalyst and accelerate the decomposition rate of H2O2 to produce ∙OH. When the amount of catalyst was increased from 0.8 g/L to 1 g/L, the decolorization rate of MO increased slightly because the excessive catalyst will reduce the H2O2 adsorption per unit area [46,47].
Figure 9d shows the degradation efficiency of MO at different H2O2 concentrations. It can be seen from the figure that within the first 2 h when the concentration of H2O2 increases from 0.097 mol/L to 0.194 mol/L, the degradation rate of MO increases significantly. The degradation rate of MO is related to the amount of ·OH. The higher the hydrogen peroxide concentration, the more that ·OH is produced, and the degradation rate of MO increases. Continuing to increase the concentration of H2O2, the degradation rate of MO is no longer increased significantly.
It can be observed that the decolorization rate can be up to more than 99% for 100 mg/L MO solution by the Fe2O3/CNFs catalyst. This result was also compared with previous studies reported for the catalytic degradation of MO shown in Table 1.

3.3. Degradation Mechanism Analysis

The UV-Vis spectra of MO solution before and after degradation are shown in Figure 10, from which it can be seen that the absorption peak of MO disappeared, and no other new peaks generated. There are two possible reasons for this phenomenon: (1) the intermediate products of catalytic degradation of MO have no absorption in the range of 190–600 nm; (2) MO is directly degraded to CO2 and H2O without any intermediate products generated.
Fe2O3/CNFs composites degrade the MO solution under acidic conditions (pH = 2) when MO is a quinone structure and the hydroxyl radical HO∙ plays a major role in the degradation process. Combined with the Fenton reaction system, it is known that MO is not directly degraded to CO2 and H2O, but certain intermediate products are produced that have no absorption between 190 and 600 nm. It is speculated that there are four possible degradation pathways of MO which are shown in Figure 11. The intermediates produced by path (1) and path (2) will continue to be oxidized to other products in the subsequent reactions. Pathway (3) and pathway (4) are the main mechanisms of this degradation. The quinone structure of MO is decolorized by HO∙ oxidation, which leads to the destruction of the -N=N- group and C-N bond, thus decolorizing the MO solution. Finally, some of the intermediates are completely oxidized to CO2 and H2O as the reaction time increases.

4. Conclusions

In this study, Fe2O3/CNFs composites were prepared by a combination of hydrothermal and electrostatic spinning techniques. The effects of hydrothermal reaction temperature and time on the preparation of the composites were investigated. The Fe2O3/CNFs composites were successfully prepared by a hydrothermal method as proved by SEM, XRD, IR, EDS, and XPS analysis. Meanwhile, the existence of chemical interactions between Fe2O3 nanoparticles and carbon nanofibers was confirmed. When the hydrothermal reaction time was 180 °C and the reaction time was 1 h, the nanoparticle size was about 90 nm with uniform distribution. The degradation efficiency of Fe2O3/CNFs on MO was investigated under the Fenton reaction. Under the optimal reaction conditions, the decolorization rate of MO could reach more than 99% within 60 min reaction. In addition, the degradation mechanism and pathway of the reaction were also speculated.
The prepared Fe2O3/CNFs composite as a heterogeneous catalyst can be separated from water easily. Furthermore, high surface area carbon nanofibers are used as the carrier of the catalysts, which can increase the degradation property. It is known that the printing and dyeing wastewater of the textile industry contains not only dyes, but also large amounts of surfactants; therefore, the degradation performance of multiple organic pollutants will be investigated in the future work.

Author Contributions

Conceptualization, K.W. and H.H.; methodology, F.W.; software, M.Z.; validation, J.W.; formal analysis, F.W.; investigation, W.Y.; resources, Y.D.; data curation, X.S.; writing—original draft preparation, M.Z.; writing—review and editing, K.W. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the National Undergraduate Training Program for Innovation and Entrepreneurship, China (202110285061E).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Acknowledgments

This work was supported by the National Undergraduate Training Program for Innovation and Entrepreneurship, China (202110285061E).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Leon, O.; Munoz-Bonilla, A.; Soto, D.; Perez, D.; Rangel, M.; Colina, M.; Fernandez-Garcia, M. Removal of Anionic and Cationic Dyes with Bioadsorbent Oxidized Chitosans. Carbohydr. Polym. 2018, 194, 375–383. [Google Scholar] [CrossRef]
  2. Yagub, M.T.; Sen, T.K.; Afroze, S.; Ang, H.M. Dye and its removal from aqueous solution by adsorption: A review. Adv. Colloid Interface Sci. 2014, 209, 172–184. [Google Scholar] [CrossRef] [PubMed]
  3. Punzi, M.; Anbalagan, A.; Borner, R.A.; Svensson, B.-M.; Jonstrup, M.; Mattiasson, B. Degradation of a textile azo dye using biological treatment followed by photo-Fenton oxidation: Evaluation of toxicity and microbial community structure. Chem. Eng. J. 2015, 270, 290–299. [Google Scholar] [CrossRef]
  4. Li, H.; An, N.; Liu, G.; Li, J.; Liu, N.; Jia, M.; Zhang, W.; Yuan, X. Adsorption behaviors of methyl orange dye on nitrogen-doped mesoporous carbon materials. J. Colloid Interface Sci. 2016, 466, 343–351. [Google Scholar] [CrossRef] [PubMed]
  5. Xiao, W.; Garba, Z.N.; Sun, S.; Lawan, L.; Wang, L.; Lin, M.; Yuan, Z. Preparation and evaluation of an effective activated carbon from white sugar for the adsorption of rhodamine B dye. J. Clean. Prod. 2020, 253, 119989. [Google Scholar] [CrossRef]
  6. Mercante, L.A.; Facure, M.H.M.; Locilento, D.A.; Sanfelice, R.C.; Migliorini, F.L.; Mattoso, L.H.C.; Correa, D.S. Solution blow spun PMMA nanofibers wrapped with reduced graphene oxide as an efficient dye adsorbent. New J. Chem. 2017, 41, 9087–9094. [Google Scholar] [CrossRef]
  7. Bu, J.; Yuan, L.; Zhang, N.; Liu, D.; Meng, Y.; Peng, X. High-efficiency adsorption of methylene blue dye from wastewater by a thiosemicarbazide functionalized graphene oxide composite. Diam. Relat. Mater. 2020, 101, 107604. [Google Scholar] [CrossRef]
  8. Xie, X.H.; Liu, N.; Yang, F.; Zhang, Q.Y.; Zheng, X.L.; Wang, Y.Q.; Liu, J.S. Comparative study of antiestrogenic activity of two dyes after Fenton oxidation and biological degradation. Ecotoxicol. Environ. Saf. 2018, 164, 416–424. [Google Scholar] [CrossRef]
  9. Esteves, B.M.; Rodrigues, C.S.D.; Boaventura, R.A.R.; Maldonado-Hodar, F.J.; Madeira, L.M. Coupling of acrylic dyeing wastewater treatment by heterogeneous Fenton oxidation in a continuous stirred tank reactor with biological degradation in a sequential batch reactor. J. Environ. Manag. 2016, 166, 193–203. [Google Scholar] [CrossRef]
  10. Karthikeyan, S.; Titus, A.; Gnanamani, A.; Mandal, A.B.; Sekaran, G. Treatment of textile wastewater by homogeneous and heterogeneous Fenton oxidation processes. Desalination 2011, 281, 438–445. [Google Scholar] [CrossRef]
  11. GilPavas, E.; Dobrosz-Gomez, L.; Gomez-Garcia, M.A. Coagulation-flocculation sequential with Fenton or Photo-Fenton processes as an alternative for the industrial textile wastewater treatment. J. Environ. Manag. 2017, 203, 615. [Google Scholar] [CrossRef] [PubMed]
  12. Blanco, J.; Torrades, F.; Varga, M.D.L.; Garcia-Montano, J. Fenton and biological-Fenton coupled processes for textile wastewater treatment and reuse. Desalination 2012, 286, 394–399. [Google Scholar] [CrossRef]
  13. Solomon, D.; Kiflie, Z.; Hulle, S.V. Integration of sequencing batch reactor and homo-catalytic advanced oxidation processes for the treatment of textile wastewater. Nanotechnol. Environ. Eng. 2020, 5, 7. [Google Scholar] [CrossRef]
  14. Asgari, G.; Faradmal, J.; Nasab, H.Z.; Ehsani, H. Catalytic ozonation of industrial textile wastewater using modified C-doped MgO eggshell membrane powder. Adv. Powder Technol. 2019, 30, 1297–1311. [Google Scholar] [CrossRef]
  15. Sathya, U.; Keerthi Nithya, M.; Balasubramanian, N. Evaluation of advanced oxidation processes (AOPs) integrated membrane bioreactor (MBR) for the real textile wastewater treatment. J. Environ. Manag. 2019, 246, 768–775. [Google Scholar] [CrossRef] [PubMed]
  16. Shi, C.M.; Tao, F.R.; Cui, Y.Z. Evaluation of nitriloacetic acid modified cellulose film on adsorption of methylene blue. Int. J. Biol. Macromol. 2018, 114, 400–407. [Google Scholar] [CrossRef]
  17. Lade, H.; Kadam, A.; Paul, D.; Govindwar, S. Biodegradation and detoxification of textile azo dyes by bacterial consortium under sequential microaerophilic/aerobic processes. EXCLI J. 2015, 14, 158–174. [Google Scholar]
  18. Guo, G.; Hao, J.X.; Tian, F.; Liu, C.; Ding, K.Q.; Xu, J.; Zhou, W.; Guan, Z.B. Decolorization and detoxification of azo dye by halo-alkaliphilic bacterial consortium: Systematic investigations of performance, pathway and metagenome. Ecotoxicol. Environ. Saf. 2020, 204, 111073. [Google Scholar] [CrossRef]
  19. He, X.L.; Song, C.; Li, Y.Y.; Wang, N.; Xu, L.; Han, X.; Wei, D.S. Efficient degradation of Azo dyes by a newly isolated fungus Trichoderma tomentosum under non-sterile conditions. Ecotoxicol. Environ. Saf. 2018, 150, 232–239. [Google Scholar] [CrossRef]
  20. Kumar, R.; Negi, S.; Sharma, P.; Prasher, I.B.; Chaudhary, S.; Dhau, J.S.; Umar, A. Wastewater cleanup using Phlebia acerina fungi: An insight into mycoremediation. J. Environ. Manag. 2018, 228, 130–139. [Google Scholar] [CrossRef]
  21. Elgarahy, A.M.; Elwakeel, K.Z.; Elshoubaky, G.A.; Mohammad, S.H. Microwave-accelerated sorption of cationic dyes onto green marine algal biomass. Environ. Sci. Pollut. Res. 2019, 26, 22704–22722. [Google Scholar] [CrossRef] [PubMed]
  22. Erkanli, M.; Yilmaz, L.; Culfaz-Emecen, P.Z.; Yetis, U. Brackish water recovery from reactive dyeing wastewater via ultrafiltration. J. Clean. Prod. 2017, 165, 1204–1214. [Google Scholar] [CrossRef]
  23. Othmani, A.; Kesraoui, A.; Akrout, H.; Elaissaoui, I.; Seffen, M. Coupling anodic oxidation, biosorption and alternating current as alternative for wastewater purification. Chemosphere 2020, 249, 126480. [Google Scholar] [CrossRef] [PubMed]
  24. Marin, N.M.; Pascu, L.F.; Demba, A.; Nita-Lazar, M.; Badea, I.A.; Aboul-Enein, H.Y. Removal of the Acid Orange 10 by ion exchange and microbiological methods. Int. J. Environ. Sci. Technol. 2019, 16, 6357–6366. [Google Scholar] [CrossRef]
  25. Waly, A.I.; Khedr, M.A.; Ali, H.M.; Riad, B.Y.; Ahmed, I.M. Synthesis and Characterization of Ion Exchanger based on Waste Cotton for Dye Removal from Wastewater. Egypt. J. Chem. 2018, 62, 451–468. [Google Scholar] [CrossRef]
  26. Bayramoglu, G.; Kunduzcu, G.; Arica, M.Y. Preparation and characterization of strong cation exchange terpolymer resin as effective adsorbent for removal of disperse dyes. Polym. Eng. Sci. 2020, 60, 192–201. [Google Scholar] [CrossRef]
  27. Kaykioglu, G.; Coban, A.; Debik, E.; Kayacan, B.B.; Koyuncu, I. Mass transport coefficients of different nanofiltration membranes for biologically pre-treated textile wastewaters. Desalination 2011, 269, 254–259. [Google Scholar] [CrossRef]
  28. Aouni, A.; Fersi, C.; Ali, M.B.S.; Dhahbi, M. Treatment of textile wastewater by a hybrid electrocoagulation/nanofiltration process. J. Hazard. Mater. 2009, 168, 868–874. [Google Scholar] [CrossRef]
  29. Sahinkaya, E.; Uzal, N.; Yetis, U.; Dilek, F.B. Biological treatment and nanofiltration of denim textile wastewater for reuse. J. Hazard. Mater. 2008, 153, 1142–1148. [Google Scholar] [CrossRef]
  30. Lin, L.; Wan, H.; Mia, R.; Jiang, H.Y.; Liu, H.H.; Mahmud, S. Bioreduction and Stabilization of Antibacterial Nanosilver Using Radix Lithospermi Phytonutrients for Azo-contaminated Wastewater Treatment: Synthesis, Optimization and Characterization. J. Clust. Sci. 2022. [Google Scholar] [CrossRef]
  31. Zhang, G.B.; Wan, H.; Mia, R.; Huang, Q.L.; Liu, H.H.; Mahmud, S. Fabrication and stabilization of nanosilver using Houttugniae for antibacterial and catalytic application. Int. J. Environ. Anal. Chem. 2022, 1–21. [Google Scholar] [CrossRef]
  32. Fouda, A.; Hassan, S.E.-D.; Saied, E.; Azab, M.S. An eco-friendly approach to textile and tannery wastewater treatment using maghemite nanoparticles (γ-Fe2O3-NPs) fabricated by Penicillium expansum strain (K-w). J. Environ. Chem. Eng. 2021, 9, 104693. [Google Scholar] [CrossRef]
  33. Feng, M.L.; Yu, S.C.; Wu, P.C.; Wang, Z.W.; Liu, S.H.; Fu, J.W. Rapid, high-efficient and selective removal of cationic dyes from wastewater using hollow polydopamine microcapsules: Isotherm, kinetics, thermodynamics and mechanism. Appl. Surf. Sci. 2021, 542, 148633. [Google Scholar] [CrossRef]
  34. Liu, Y.Y.; Jin, W.; Zhao, Y.P.; Zhang, G.S.; Zhang, W. Enhanced catalytic degradation of methylene blue by α-Fe2O3/graphene oxide via heterogeneous photo-Fenton reactions. Appl. Catal. B Environ. 2017, 206, 642–652. [Google Scholar] [CrossRef]
  35. Guo, S.; Wang, H.J.; Yang, W.; Fida, H.; You, L.M.; Zhou, K. Scalable synthesis of Ca-doped α-Fe2O3 with abundant oxygen vacancies for enhanced degradation of organic pollutants through peroxymonosulfate activation. Appl. Catal. B Environ. 2020, 262, 118520. [Google Scholar] [CrossRef]
  36. Ding, M.M.; Chen, W.; Xu, H.; Shen, Z.; Lin, T.; Hu, K.; Lu, C.H.; Xie, Z.L. Novel α-Fe2O3/MXene nanocomposite as heterogeneous activator of peroxymonosulfate for the degradation of salicylic acid. J. Hazard. Mater. 2020, 382, 121064. [Google Scholar] [CrossRef]
  37. Niu, L.J.; Zhang, G.M.; Xian, G.; Ren, Z.J.; Wei, T.; Li, Q.G.; Zhang, Y.; Zou, Z.G. Tetracycline degradation by persulfate activated with magnetic γ-Fe2O3/CeO2 catalyst: Performance, activation mechanism and degradation pathway. Sep. Purif. Technol. 2021, 259, 118156. [Google Scholar] [CrossRef]
  38. Wang, W.L.; Zhao, W.L.; Zhang, H.C.; Dou, X.C.; Shi, H.F. 2D/2D step-scheme α-Fe2O3/Bi2WO6 photocatalyst with efficient charge transfer for enhanced photo-Fenton catalytic activity. Chin. J. Catal. 2021, 42, 97–106. [Google Scholar] [CrossRef]
  39. Park, H.; Lee, Y.C.; Choi, B.G.; Choi, Y.S.; Yang, J.W.; Hong, W.H. Green one-pot assembly of iron-based nanomaterials for the rational design of structure. Chem. Commun. 2009, 27, 4058–4060. [Google Scholar] [CrossRef]
  40. Liang, H.-W.; Cao, X.; Zhang, W.-J.; Lin, H.-T.; Zhou, F.; Chen, L.-F.; Yu, S.-H. Robust and Highly Efficient Free-Standing Carbonaceous Nanofiber Membranes for Water Purification. Adv. Funct. Mater. 2011, 21, 3851–3858. [Google Scholar] [CrossRef]
  41. Wu, X.Y.; Yang, F.; Gan, J.; Zhao, W.Y.; Wu, Y. A flower-like waterborne coating with self-cleaning, self-repairing properties for superhydrophobic applications. J. Mater. Res. Technol. 2021, 14, 1820–1829. [Google Scholar] [CrossRef]
  42. Lassoued, A.; Dkhil, B.; Gadri, A.; Ammar, S. Control of the shape and size of iron oxide (alpha-Fe2O3) nanoparticles synthesized through the chemical precipitation method. Results Phys. 2017, 7, 3007–3015. [Google Scholar] [CrossRef]
  43. Zhang, X.D.; Yang, Y.; Song, L.; Wang, Y.X.; He, C.; Wang, Z.; Cui, L.F. High and stable catalytic activity of Ag/Fe2O3 catalysts derived from MOFs for CO oxidation. Mol. Catal. 2018, 447, 80–89. [Google Scholar] [CrossRef]
  44. Qiao, J.; Zhang, X.; Xu, D.M.; Kong, L.X.; Lv, L.F.; Yang, F.; Wang, F.L.; Liu, W.; Liu, J.R. Design and synthesis of TiO2/Co/carbon nanofibers with tunable and efficient electromagnetic absorption. Chem. Eng. J. 2020, 380, 122591. [Google Scholar] [CrossRef]
  45. Zhu, H.Y.; Jiang, R.; Xiao, L.; Zeng, G.M. Preparation, characterization, adsorption kinetics and thermodynamics of novel magnetic chitosan enwrapping nanosized gamma-Fe2O3 and multi-walled carbon nanotubes with enhanced adsorption properties for methyl orange. Bioresour. Technol. 2010, 101, 5063–5069. [Google Scholar] [CrossRef]
  46. Pereira, M.C.; Oliveira, C.A.; Murad, E. Iron oxide catalysts: Fenton and Fenton-like reactions a review. Clay Miner. 2012, 47, 285–302. [Google Scholar] [CrossRef]
  47. Jia, L.D.; Zhang, Q.R. Heterogeneous Fenton catalytic oxidation for water treatment. Prog. Chem. 2020, 32, 978–988. [Google Scholar]
  48. Hieu, V.Q.; Phung, T.K.; Nguyen, T.-Q.; Khan, A.; Doan, V.D.; Tran, V.A.; Le, V.T. Photocatalytic degradation of methyl orange dye by Ti3C2–TiO2 heterojunction under solar light. Chemosphere 2021, 276, 130154. [Google Scholar] [CrossRef]
  49. Adeel, M.; Saeed, M.; Khan, I.; Muneer, M.; Akram, N. Synthesis and Characterization of Co-ZnO and Evaluation of Its Photocatalytic Activity for Photodegradation of Methyl Orange. ACS Omega 2021, 6, 1426–1435. [Google Scholar] [CrossRef]
  50. Shahzad, K.; Najam, T.; Bashir, M.S.; Nazir, M.A.; Rehman, A.U.; Bashir, M.A.; Shah, S.S.A. Fabrication of Periodic Mesoporous Organo Silicate (PMOS) composites of Ag and ZnO: Photo-catalytic degradation of methylene blue and methyl orange. Inorg. Chem. Commun. 2021, 123, 108357. [Google Scholar] [CrossRef]
  51. Zeng, Q.Q.; Liu, Y.; Shen, L.G.; Lin, H.J.; Yu, W.M.; Xu, Y.C.; Li, R.J.; Huang, L.L. Facile preparation of recyclable magnetic Ni@filter paper composite materials for efficient photocatalytic degradation of methyl orange. J. Colloid Interface Sci. 2021, 582, 291–300. [Google Scholar] [CrossRef] [PubMed]
  52. Znad, H.; Abbas, K.; Hena, S.; Awual, M.R. Synthesis a novel multilamellar mesoporous TiO2/ZSM-5 for photo-catalytic degradation of methyl orange dye in aqueous media. J. Environ. Chem. Eng. 2018, 6, 218–227. [Google Scholar] [CrossRef]
  53. Saravanan, R.; Sacari, E.; Gracia, F.; Khan, M.M.; Mosquera, E.; Gupta, V.K. Conducting PANI stimulated ZnO system for visible light photocatalytic degradation of coloured dyes. J. Mol. Liq. 2016, 221, 1029–1033. [Google Scholar] [CrossRef]
Polymers 14 03584 g001 550
Figure 1. Schematic illustration of fabrication of Fe2O3/CNFs composite nanocatalysts and their degradation of MO.
Figure 1. Schematic illustration of fabrication of Fe2O3/CNFs composite nanocatalysts and their degradation of MO.
Polymers 14 03584 g001
Polymers 14 03584 g002 550
Figure 2. SEM images of Fe2O3/CNFs (effect of temperature): (a) 130 °C; (b) 140 °C; (c) 150 °C; (d) 160 °C; (e) 170 °C; (f) 180 °C.
Figure 2. SEM images of Fe2O3/CNFs (effect of temperature): (a) 130 °C; (b) 140 °C; (c) 150 °C; (d) 160 °C; (e) 170 °C; (f) 180 °C.
Polymers 14 03584 g002
Polymers 14 03584 g003 550
Figure 3. SEM images of Fe2O3/CNFs (effect of time): (a) 1 h; (b) 2 h; (c) 3 h; (d) 4 h; (e) 5 h; (f) 6 h.
Figure 3. SEM images of Fe2O3/CNFs (effect of time): (a) 1 h; (b) 2 h; (c) 3 h; (d) 4 h; (e) 5 h; (f) 6 h.
Polymers 14 03584 g003
Polymers 14 03584 g004 550
Figure 4. EDS image of Fe2O3/CNFs.
Figure 4. EDS image of Fe2O3/CNFs.
Polymers 14 03584 g004
Polymers 14 03584 g005 550
Figure 5. XRD patterns of Fe2O3/CNFs: (a) effect of reaction temperature; (b) effect of reaction time.
Figure 5. XRD patterns of Fe2O3/CNFs: (a) effect of reaction temperature; (b) effect of reaction time.
Polymers 14 03584 g005
Polymers 14 03584 g006 550
Figure 6. IR image of CNFs and Fe2O3/CNFs.
Figure 6. IR image of CNFs and Fe2O3/CNFs.
Polymers 14 03584 g006
Polymers 14 03584 g007 550
Figure 7. XPS spectra of (a) Fe2O3/CNFs; (b) Fe 2p; (c) C 1 s; (d) O 1 s.
Figure 7. XPS spectra of (a) Fe2O3/CNFs; (b) Fe 2p; (c) C 1 s; (d) O 1 s.
Polymers 14 03584 g007
Polymers 14 03584 g008 550
Figure 8. UV-vis spectra of MO at different pH value.
Figure 8. UV-vis spectra of MO at different pH value.
Polymers 14 03584 g008
Polymers 14 03584 g009 550
Figure 9. Decolorization effect of MO (a) with pH: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.6 g/L, [H2O2]0 = 0.155 mol/L, T = 80 °C, t = 2 h); (b) with temperature: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.8 g/L, [H2O2]0= 0.194 mol/L, pH = 2); (c) with Fe2O3/CNFs content: ([MO]0 = 100 mg/L, [H2O2]0 = 0.194 mol/L, pH = 2, T = 80 °C); (d) with H2O2 content: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.8 g/L, pH = 2, T = 80 °C).
Figure 9. Decolorization effect of MO (a) with pH: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.6 g/L, [H2O2]0 = 0.155 mol/L, T = 80 °C, t = 2 h); (b) with temperature: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.8 g/L, [H2O2]0= 0.194 mol/L, pH = 2); (c) with Fe2O3/CNFs content: ([MO]0 = 100 mg/L, [H2O2]0 = 0.194 mol/L, pH = 2, T = 80 °C); (d) with H2O2 content: ([MO]0 = 100 mg/L, [Fe2O3/CNFs]0 = 0.8 g/L, pH = 2, T = 80 °C).
Polymers 14 03584 g009
Polymers 14 03584 g010 550
Figure 10. UV-vis spectra of MO before and after degradation.
Figure 10. UV-vis spectra of MO before and after degradation.
Polymers 14 03584 g010
Polymers 14 03584 g011 550
Figure 11. Speculation of possible degradation pathways of MO by Fe2O3/CNFs.
Figure 11. Speculation of possible degradation pathways of MO by Fe2O3/CNFs.
Polymers 14 03584 g011
Table
Table 1. Comparison with previous studies reported for catalytic degradation of MO.
Table 1. Comparison with previous studies reported for catalytic degradation of MO.
CatalystsInitial Concentration Decolorization RateReaction TimeReferences
Fe2O3/CNFs100 mg/LMore than 99% 60 minThis work
Ti3C2-TiO240 mg/L99%40 min[48]
10% Co-ZnO100 mg/L100%120 min[49]
Ag-PMOS20 mg/L81% & 48%60 min[50]
ZnO-PMOS47% & 57%
Ni@FP15 mg/L93.40%5 min[51]
TiO2/ZSM-520 mg/L99.55% 180 min[52]
PANI(1.5 mol)/ZnO-98.3%180 min[53]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Zhang, M.; Wang, F.; Shi, X.; Wei, J.; Yan, W.; Dong, Y.; Hu, H.; Wei, K. Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts. Polymers 2022, 14, 3584. https://doi.org/10.3390/polym14173584

AMA Style

Zhang M, Wang F, Shi X, Wei J, Yan W, Dong Y, Hu H, Wei K. Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts. Polymers. 2022; 14(17):3584. https://doi.org/10.3390/polym14173584

Chicago/Turabian Style

Zhang, Mingpan, Fuli Wang, Xinran Shi, Jing Wei, Weixia Yan, Yihang Dong, Huiqiang Hu, and Kai Wei. 2022. "Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts" Polymers 14, no. 17: 3584. https://doi.org/10.3390/polym14173584

APA Style

Zhang, M., Wang, F., Shi, X., Wei, J., Yan, W., Dong, Y., Hu, H., & Wei, K. (2022). Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts. Polymers, 14(17), 3584. https://doi.org/10.3390/polym14173584

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop