Next Article in Journal
From Nature to Technology: Exploring Bioinspired Polymer Actuators via Electrospinning
Previous Article in Journal
Experimental and Analytical Studies on Low-Cost Glass-Fiber-Reinforced-Polymer-Composite-Strengthened Reinforced Concrete Beams: A Comparison with Carbon/Sisal Fiber-Reinforced Polymers
Previous Article in Special Issue
Poloxamer/Carboxymethyl Pullulan Aqueous Systems—Miscibility and Thermogelation Studies Using Viscometry, Rheology and Dynamic Light Scattering
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Polymers
Volume 15
Issue 19
10.3390/polym15194028
polymers-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins

by
Daniela Ionita
,
Mariana Cristea
*,
Constantin Gaina
,
Mihaela Silion
and
Bogdan C. Simionescu
“Petru Poni” Institute of Macromolecular Chemistry, Aleea Grigore Ghica 41A, 700487 Iasi, Romania
*
Author to whom correspondence should be addressed.
Polymers 2023, 15(19), 4028; https://doi.org/10.3390/polym15194028
Submission received: 31 August 2023 / Revised: 29 September 2023 / Accepted: 3 October 2023 / Published: 9 October 2023
(This article belongs to the Special Issue Self-Healing Polymers, Proteins and Composites)
Browse Figures
Versions Notes

Abstract

:
The present work is focused on polyester resins obtained from the diglycidyl ether of bisphenol A and anthracene modified 5-maleimidoisophthalic acid. Because the maleimide-anthracene Diels–Alder (DA) adduct is stable at high temperatures, it is considered a good option for high performance polymers. However, the information related to the retroDA reaction for this type of adduct is sometimes incoherent. A detailed thermal study (conventional TGA, HiRes TGA, MTGA, DSC, MDSC) was performed in order to establish whether the rDA reaction can be revealed for this type of anthracene modified polyester resins. The TGA method confirmed the cleavage of the anthracene–maleimide DA adduct, while the DSC demonstrated the presence of anthracene in the system. At high temperatures, unprotected maleimide homopolymerizes and/or reacts with allyl groups according to the –ene reaction. Therefore, the thermal DA reaction is not displayed anymore upon the subsequent cooling, and the glass transition region is registered at a higher temperature range during the second heating. The use of sample-controlled thermal analysis (HiRes TGA) and MTGA improved the TGA result; however, it was not possible to separate the very complex degradation processes that are interconnected.

1. Introduction

The notion of self-healing—simply defined as the potential of a polymeric material to be mended after damage, through physical or chemical strategies [1]—was unconceivable a few decades ago for epoxy- and maleimide-based polymers [2,3,4,5]. These classes of polymers exhibit high performance characteristics, though they come along with an intrinsic brittleness. A great deal of effort was directed towards finding the optimum equilibrium between the desired thermo-mechanical properties and the toughness. From the moment when the concept of dynamic covalent chemistry was introduced by Lehn in his landmark article, maleimide-based polymers were very soon largely investigated for their ability to function as a dienophile in the Diels–Alder (DA) reaction, as a modality for self-healing [6,7,8]. The temperature is the stimulus for the retrodienic reaction, which might be reversible by cooling, which triggers the repair of the polymeric material. The furan/maleimide (diene/dienophile) association is by far the most investigated, comprising multitudinous structures under scrutiny [9,10,11,12,13,14,15,16]. The reason for this interest lies in the approachability of the process, due to the fact that the furan/maleimide DA reaction takes place at room temperature and that the retro DA (rDA) reaction does not need excessive heating. The reported temperatures for the rDA reaction of furan/maleimide-based polymers do not exceed 150 °C. This fact can be an inconvenience for self-healing polymers that are intended for applications at high temperatures [17]. Anthracene can be an alternative for the diene in the case where the polymers have distinctive structures or where self-healing needs to be functional at elevated temperatures [18,19,20,21,22,23,24]. In the work of B. Gacel et al., graft copolymers were synthesized using anthracene-functionalized polystyrene and maleimido-functionalized poly(ethylene glycol) or poly(methyl methacrylate) [18], but only their glass transition temperatures were reported. In a very recent review, Briou at al. excellently systematized the issues related to the use of anthracene in DA reactions when it is connected to polymers: the lack of direct evidence of the rDA reaction and the inconsistency of the values reported as the rDA temperature [25]. Very frequently, the scientific literature cites the work of Grigoras and Colontin who probed the rDA reaction by thermogravimetric analysis (TGA) by heating the adduct obtained between the anthracene-based dienes and the telechelic dienophiles containing bismaleimide functions [26]. Shah et al. prepared side-chain-free highly aromatic polyimides containing anthracene via DA chemistry [19]. Actually, the diamine precursor was a DA adduct and was responsible for the formation of fully aromatic polymers. The rDA reaction temperature was determined by TGA above 215 °C. Recently, TGA was also used for this purpose in the case of anthracene/bismaleimide DA elastomers [27]. Specifically, anthracene moieties were attached to copolymers of ethylene, vinyl acetate, and glycidyl methacrylate (EVA-GMA copolymers). Covalent adaptable (reversible) networks were obtained by crosslinking with two dienophiles, (1,1′-(methylenedi-4,1-phenylene) bismaleimide and bifunctional 1,2,4-triazoline-3,5-dione), via DA chemistry. Aside from the DSC features, the TGA curves showed a substantial mass loss in the range 130 ÷ 330 °C, associated with the cleavage of the Diels–Alder adducts. Concerning the cleaving ability of polymers with anthracene and maleimide, a very important aspect was clearly underlined by Heo et al. [22]. They synthesized high thermally stable polyurethanes form isocyanate-terminated prepolymers and triethanol amines, with different ratios diisocyanate/triethanol amine. The prepolymers resulted through the addition of hexamethylene diisocyanate to pre-crosslinked adducts of 9-anthracenemethanol and N-(2-hydroxyethyl)-maleimide. Because of the high thermal stability of this type of polymer, the mechanical DA cleavage was also considered instead of the thermal rDA reaction. Another perspective is presented by Yoshie et al. in the case of networks with self-mending ability, based on anthracene and maleimide DA adducts. The structures of these polymeric compounds—prepared starting from anthryl-telechelic poly(ethylene adipate) and tris-maleimide—were not stable at high temperature; therefore, mechanical stress was applied for the rDA reaction [20].
The aim of this paper was to probe, by thermal analysis, whether the thermal rDA reaction can be revealed for polyester resins obtained from diglycidyl ether of bisphenol A and anthracene modified 5-maleimidoisophthalic acid. In addition to conventional TGA and differential scanning calorimetry (DSC), sample-controlled thermal analysis (HiRes TGA), modulated TGA (MTGA), and modulated DSC (MDSC) will be considered. Peng et al. used MDSC in the study of four-armed cross-linked polymers obtained via furan/maleimide DA reaction to separate the glass transition region (reversing heat flow signal) and the rDA reaction (non-reversing heat flow signal) [28]. These two phenomena appeared to be overlapping in the total heat flow signal. In HiRes TGA, the heating profile is controlled by the feedback from the sample, such as the heating rate defined for the experiment decreasing consistently during the mass loss [29,30]. The general purpose of this mode of operation is to obtain a better resolution of thermal events. In MTGA, a modulated temperature profile is superposed on the conventional linear heating one [31]. The activation energy is obtained for the whole range of the experimental conversion in one run, and in much less time than the conventional procedures. These two TGA options (HiRes TGA and MTGA) have rarely been used for the investigation of polymers [32,33,34,35,36,37] and, as we are aware, there are no such results reported for Diels–Alder polymers.

2. Materials and Methods

2.1. Materials

Maleic anhydride (99%), 5-aminoisophtalic acid (94%), diglycidyl ether of bisphenol A (DGEBA, epoxide equivalent weight 188 g·eq.−1), acetic acid, benzyltriethylammonium chloride (TEBAC, 99%), anthracene, methanol, N-methylpyrrolidone (NMP), ethylene glycol butyl ether (BEG), 2-methoxyethanol, and methanol were purchased from Sigma Aldrich, Darmstadt, Germany. All reactants and solvents were analytical grade and were used as received.

2.2. Synthesis of Polyester Resins Derived from DGEBA and 5-Maleimidoisophtalic Acid (DGEBA-MIPA)

First, 5-maleimidoisophthalic acid (MIPA) was prepared as previously reported [38,39]. Briefly, a mixture of 5-aminoisophthalic acid (7 g), maleic anhydride (4 g), and 60% acetic acid was refluxed for 4 h. The obtained solid was washed with water and methanol and dried at 100 °C under vacuum.
A mixture of DGEBA (3.0 g) and MIPA (2.06 g) dissolved in N-methylpyrrolidone (1/1 molar ratio, 15% solid mass) was stirred for 3 h at 160 °C, in the presence of benzyltriethylammonium chloride (Scheme 1). The solution was cast on a glass plate and the solvent was removed by heating at 120 °C for 6 h.

2.3. Synthesis of Polyester Resins Derived from DGEBA and 5-(9,10-Dihydro-9,10-ethanoanthracene-11,12-dicarboximido) Maleimidoisophtalic Acid (DGEBA-Anth)

Anthracene (1.8 g) was added to 5-maleimidoisophthalic acid (2.7 g) dissolved in 50 mL 2-methoxyethanol and refluxed for 3 h. After cooling and precipitation in water, the anthracene–maleimido anhydride diacid adduct (AMADA) was washed twice with methanol, filtered, and dried for 3 h at 90 °C.
A quantity of 3 g DGEBA (188 g·eq.−1) was dissolved in BEG in the reaction vessel, at room temperature, under stirring. Separately, AMADA (2.8 g) was dissolved in BEG, under ultrasonication, for 10 min, and the solution was added to DGEBA, under stirring (Scheme 2). The reaction mixture was refluxed (170 °C) for 3 h. The final product was precipitated in methanol and dried at 100 °C for 6 h.

2.4. Synthesis of Polyester Resins Derived from Diglycidylether of o,o′-Diallyl Bisphenol A (DADGBPA) and 5-(9,10-Dihydro-9,10-ethanoanthracene-11,12-dicarboximido) Maleimidoisophtalic Acid (DGEBA-allyl-Anth)

The compound DADGBPA was prepared, as previously described [40,41], via o,o′-diallyl bisphenol A, by its reaction with epichlorohydrine and subsequent dehydrohalogenation. AMADA (5 g) dissolved in BEG was added to DADGBPA (4.44 g) dissolved in BEG and the reaction mixture was refluxed for 3 h in the presence of TEBAC (Scheme 2). The final product was precipitated in methanol and dried at 100 °C for 6 h.

2.5. Characterization

The Fourier transform infrared (FTIR) spectra were recorded on a Bruker Vertex 70 instrument (Bruker, Ettlingen, Germany), equipped with a Golden Gate single reflection ATR accessory. The spectra were measured in the range of 4000–600 cm−1, with a nominal resolution of 2 cm−1, after 32 scans.
The thermogravimetric analyses of the samples were performed on a Discovery TGA 5500 (TA Instruments, New Castle, DE, USA). The tests were conducted by using three heating rate algorithms: constant heating rate (20 °C/min) and dynamic heating rate (HiRes TGA and modulated approach-MTGA), from ambient temperature to 700 °C. The HiRes TGA experiments were performed at resolution (R) 3 and sensitivity (S) 1 and 2, using the constant heating rates of 20 °C/min and 50 °C/min. The MTGA experiments were performed with 2 °C/min, a modulation amplitude of ±5 °C, and a period of 200 s.
Differential scanning calorimetry (conventional—DSC and modulated—MDSC) was performed with a Discovery DSC 250 (TA Instruments, New Castle, DE, USA) under nitrogen atmosphere (50 mL/min). The heating–cooling–heating program with a heating rate of 20 °C/min was employed, unless otherwise specified. The MDSC analysis was carried out with 3 °C/min heating rate, modulation amplitude ±1 °C, and modulation period of 60 s.
The data acquisition and analysis for the mass spectrometry (MS) were performed with an Agilent 6500 Series Accurate-Mass Quadrupole Time-of-Flight (Q-TOF) LC/MS instrument (Agilent Technologies, Santa Clara, CA, USA). The DGEBA-allyl-Anth dissolved in DMF:methanol (9:1, v/v) was introduced into the electrospray source (ESI) via a syringe pump at a flow rate of 0.02 mL/min. All spectra were acquired in the range m/z 100–3000, in negative ion mode (ESI-), with a source temperature of 325 °C and a capillary voltage of 4.2 kV. Nitrogen (N2) was used as the drying/nebulizer gas, at 35 psi and a flow rate of 8 L/min. The mass scale was calibrated using the standard calibration procedure and the compounds were provided by the manufacturer. Data were collected and processed using Mass Hunter Workstation Software Data Acquisition for 6200/6500 series, v. B.07.00 (Agilent Technologies, Inc., Santa Clara, CA, USA).

3. Results and Discussion

During the synthesis of the epoxy resins containing maleimide groups (DGEBA-MIPA, Scheme 1), the formation of brittle high crosslinked compounds cannot be avoided, mainly because of the homopolymerization of the maleimide groups. The maleimide groups can be protected with anthracene through a DA reaction (Scheme 2, DGEBA-Anth). Moreover, the maleimide rigid systems can be toughened with reactive diluents [5,40,42,43], a procedure that was considered additionally for the synthesis of the DGEBA-allyl-Anth (Scheme 2) by using a diallyl bisphenol as reactant.

3.1. Structural Characterization of Polyester Resins

Figure 1 presents the FTIR spectra of DGEBA and DGEBA-MIPA comparatively.
The absence of the absorption peak of an oxirane ring (915 cm−1 in DGEBA) was the main indication of the occurrence of the addition reaction between the carboxylic acid groups of MIPA and the oxyrane groups of DGEBA [40,42,44]. The presence of the anhydride ring in the final resin is confirmed by the presence of the peaks associated with the carbonyl groups (1726 cm−1) and—C=C– linkage (830 cm−1), both belonging to the cyclic imide group [39,40,41,45].
Figure 2 includes the FTIR spectra of the DGEBA-Anth and the DGEBA-allyl-Anth, as a resulted of the syntheses, and of one more sample cured at 300 °C (DGEBA-allyl-Anth 300).
The formation of the adduct is supported by the 1781 cm−1 peak found in both compounds [46,47,48]. The heating of the DGEBA-allyl-Anth sample at 300 °C prompted the deprotection of the maleimide groups—associated with the estompation of the adduct signal in the DGEBA-allyl-Anth 300—along with their cycloaddition to the allyl groups (DGEBA-allyl-Anth, 890–960 cm−1), which are no longer present in the DGEBA-allyl-Anth 300 (inset of Figure 2).

3.2. Thermogravimetric Analysis of Polyester Resins

The results of the conventional TGA, expressed in the evolution of the sample mass and its temperature derivative (DTGA), are represented in Figure 3a,b. Also, Table 1 contains the main thermal characteristics of the samples of the DGEBA-MIPA, DGEBA-Anth, and DGEBA-allyl-Anth. The values of the onset degradation temperature are much lower for the samples with anthracene than for the sample DGEBA-MIPA (Table 1). The DTGA curve of the sample DGEBA-Anth exhibited a sharp peak centered at 215 °C, which can be associated with the cleavage of the Diels–Alder adduct maleimide-anthracene (Figure 3a).
In the case of the DGEBA-allyl-Anth, there is a succession of small DTGA peaks/shoulders (200 °C, 245 °C, 275 °C). They were connected with the deprotection of the maleimide groups, followed by the –ene reaction with allyl groups (Wagner-Juaregg intermediate) and the subsequent Diels–Alder reaction that generates a cyclic network structure [4,49]. The cleavage of the ether–ether linkage and the decomposition of succinimide groups are reflected in the main degradation range (350–450 °C). These two degradation steps are not well-separated for the DGEBA-MIPA and the DGEBA-Anth in the conventional TGA experiment. The DTGA peaks recorded around 500 °C on the conventional thermal degradation curves of the DGEBA-Anth and the DGEBA-allyl-Anth evidence the decomposition of the aromatic cycles.
Given the fact that the HiRes TGA approach could distinguish very close degradation peaks, the question is whether a better separation of the main degradation steps from the range 350–450 °C is possible. As a preliminary requirement, the experimental conditions (constant heating rate, resolution, and sensitivity) should be suitably chosen, so that the experimental time may be comparable with that of the conventional TGA experiment. Otherwise, kinetic effects deem the conventional TGA and HiRes TGA results inadequate for comparative discussions. The constant heating rate is the value of the heating rate in the absence of degradation events. As the balance detects degradation, the heating rate was implicitly decreased until no degradation was sensed. According to our practice, resolution 3 is the most adequate for our samples to fulfill this essential. Figure 4a includes the results of conventional TGA (heating rate: 20 °C/min) and HiRes TGA (constant heating rates: 20 and 50 °C/min, R3, and S1) for the DGEBA-MIPA sample. The two peaks shifted to a lower temperature and intensified in the HiRes experiment, but their resolution was not improved. The use of two different constant heating rates did not produce an important change in the result. The modification of sensitivity from 1 to 2 (Figure 4b) increased the sharpness of the main peak, without an improved differentiation of the peaks in the main degradation stage. Nevertheless, unlike conventional TGA (Figure 3b), the HiRes experiment also marks the DGEBA-MIPA for the degradation of the aromatic cycles (around 500 °C).
Similarly, when the HiRes approach was applied to the DGEBA-Anth and the DGEBA-allyl-Anth (Figure 5a,b), there were some ameliorations in the clarity of the degradation steps, but the overlapping degradation phenomena were not better separated.
In the MTGA experiments (Figure 6a), the degradation steps discussed before were more obvious, including the rDA reaction. However, it is worth recalling that the heating rate was much lower (2 °C/min). The MTGA experiment lasted 340 min, as compared to 34 min (conventional TGA) and 47 min (HiRes TGA, R3, S1). The variation in the activation energy with the conversion, registered in real time, shows a peak at 0.15 conversion (DGEBA-Anth) due to the cleavage of the maleimide–anthracene adduct. Generally, it had an increasing trend with the conversion, with values between 100 and 200 kJ/mol.

3.3. Differential Scanning Calorimetry Analysis of Polyester Resins

Figure 7a displays the DSC curves (first heating-cooling-second heating) of the DGEBA-MIPA. In the first heating step, the glass transition region (onset of the glass transition temperature—Tg: 70.1 °C) was overlapped with a stress relaxation. The presence of an exothermal signal with the middle at 220 °C (±0.25 °C) is an indication of the maleimide groups homopolymerization. As the result of the formation of a crosslinked network, the glass transition region was shifted to higher temperatures in the cooling step (midpoint at 109.3 ± 0.25 °C) and in the second heating step (midpoint: 113.7 ± 0.25 °C). A particular feature of MDSC is the possibility to separate the glass transition and the enthalpic relaxation in two separate signals, reversible and non-reversible [50]. Therefore, the Tg of the initial DGEBA-MIPA was determined in a MDSC experiment as 53.9 °C (±0.25 °C) (Figure 7b). This value is smaller than the onset Tg determined in conventional DSC, because the heating rate was much lower (MDSC: 2 °C/min vs. DSC: 20 °C/min). Also, the exothermal peak associated with the homopolymerization of the maleimide groups was shifted to lower temperatures. To avoid crosslinking, the maleimide groups were protected with anthracene moieties (DGEBA-Anth and DGEBA-allyl-Anth).
The most prominent detail of the conventional DSC scan of the DGEBA-Anth is the appearance of the sharp endothermic peak in the first heating step (Figure 8a), at 270 °C. More than likely, the endothermic peak confirms the presence of the anthracene in the system [51], as a consequence of the deprotection of the maleimide groups (rDA reaction). This peak was displayed only when working with a hermetic crucible and at the heating rate of 5 °C/min. Some unprotected maleimide groups still exist in the initial sample, because the glass transition region was shifted to a higher temperature in the second heating step. No exothermic signal was registered in the cooling step as evidence for another Diels–Alder reaction. The endothermic peak associated with anthracene broadens in MDSC (Figure 8b), likely for kinetic reasons.
The presence of anthracene in the system was also confirmed by the DSC scans of the DGEBA-allyl-Anth performed in a hermetic crucible (Figure 9a). It is worth noting that MDSC put forward two consecutive glass transition regions between 30 and 100 °C. This observation suggests that not all the maleimide groups reacted with anthracene. The endothermic peak associated with anthracene cleavage is broader than in the DGEBA-MIPA and DGEBA-Anth. As the anthracene is released, the maleimide groups can react with the allyl groups (-ene reaction via Wagner-Juaregg intermediate), and the viscosity of the product growths and the thermal transfer is delayed.
The ESI-MS allows for the direct analysis of sample solutions; however, the size of the peaks do not offer a quantitative evaluation of the data, but only qualitative [52,53]. The method was employed for compounds synthesized via Diels–Alder chemistry in order to track the progress of the transformation [54,55]. Nebhani and Barner-Kowollik investigated a diene–dienophile pair composed of anthracenyl capped polyethylene glycols and fullerenes [56]. Table 2 includes some of the species that were identified by means of mass spectrometry for the sample DGEBA-allyl-Anth (Figure 10).
In the negative ESI-MS spectrum of the DGEBA-allyl-Anth (Figure 10) the most intense peak (m/z 896.45) is assigned to the fragment [F1–2OH–H]−, which arises from the loss of two hydroxyl groups of the [F1–H]− species (m/z 930.39) (Scheme 3). The signal m/z 1755.76 can be attributed to the species [F2-2OH-H]− (Scheme 4).
Moreover, double charged ions (2-) were also detected in the mass spectrum. The species [F2-2H]2− and [F4-2H]2− correspond to the molecular segments with 2 and 4 anthracene-protected maleimide groups, respectively (Scheme 3 and Scheme 4).
The double charged ions (2-) detected in the mass spectrum (m/z > 2000) suggest that the molecular structures of the species associated with the sample DGEBA-allyl-Ant may include 5 anthracene-protected maleimide groups (around 4500 Da).
The MS results are consistent with the prevalence of the maleimide groups protected with anthracene in the DGEBA-allyl-Anth sample. Nevertheless, after the thermal rDA reaction that takes place in the DSC oven, the unprotected maleimide is prone to homopolymerization or –ene reaction at high temperatures, with the formation of complex networks. The DA reaction was longer displayed on cooling and the glass transition region was shifted to higher temperatures during the next heating (Figure 9a).

4. Conclusions

In this study we prepared polyester resins based on DGEBA and allyl-modified DGEBA. The maleimide groups were protected with anthracene. The TGA investigations (conventional, HiRes TGA, and MTGA) confirmed the cleavage of the maleimide–anthracene adduct at 215 °C for the DGEBA-Anth and 200 °C for the DGEBA-allyl-Anth. The rDA was also sustained by the DSC sharp endothermic signal that is associated with the presence of the anthracene in the system after the break of the DA adduct. However, the DA reaction was not evidenced on the subsequent cooling. The preponderance of the species with anthracene-protected maleimide groups revealed by MS-ESI in the case of the DGEBA-allyl-Anth confirms the narrowness of the secondary reaction (maleimide homopolymerization, -ene reaction) during synthesis. However, the thermal rDA in the TGA and DSC instruments triggers the secondary reactions as the maleimide is no longer protected. The HiRes TGA performed on the samples improved the TGA result by featuring new degradation steps like aromatics but did not completely separate the main degradation processes because of the complexity of the decomposition reactions. The activation energy had an increasing trend with the conversion (100–200 kJ/mol) and a maximum was registered when the DA adduct separated.

Author Contributions

Conceptualization, M.C.; methodology, M.C., D.I., C.G. and M.S.; software, M.C. and D.I.; validation, M.C., C.G., M.S., and B.C.S.; formal analysis, D.I. and M.S.; investigation, M.C., D.I., C.G. and M.S.; writing—original draft preparation, M.C.; writing—review and editing, M.C. and D.I.; visualization, M.C., C.G., M.S. and B.C.S.; supervision, B.C.S. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Data Availability Statement

The data presented in this study are available on request from the corresponding author.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Wang, S.; Urban, M.W. Self-healing polymers. Nat. Rev. Mater. 2020, 5, 562–583. [Google Scholar] [CrossRef]
  2. Frigione, M.E.; Mascia, L.; Acierni, D. Oligomeric and polymeric modifiers for toughening of epoxy resins. Eur. Polym. J. 1995, 31, 1021–1029. [Google Scholar] [CrossRef]
  3. Unnikrishnan, K.P.; Thachil, E.T. Toughening of epoxy resins. Des. Monomers Polym. 2014, 9, 129–152. [Google Scholar] [CrossRef]
  4. Tang, H.; Li, W.; Fan, X.; Chen, X.; Shen, Z.; Zhou, Q. Synthesis, preparation and properties of novel high-performance allyl-maleimide resins. Polymer 2009, 50, 1414–1422. [Google Scholar] [CrossRef]
  5. Iredale, R.J.; Ward, C.; Hamerton, I. Modern advances in bismaleimide resin technology: A 21st century perspective on the chemistry of addition polyimides. Prog. Polym. Sci. 2017, 69, 1–21. [Google Scholar] [CrossRef]
  6. Lehn, J.-M. Dynamic combinatorial chemistry and virtual combinatorial libraries. Chem. Eur. J. 1999, 5, 2455–2463. [Google Scholar] [CrossRef]
  7. Van Zee, N.J.; Nicolaÿ, R. Vitrimers: Permanently crosslinked polymers with dynamic network topology. Prog. Polym. Sci. 2020, 104, 101233. [Google Scholar] [CrossRef]
  8. Bergman, S.D.; Wudl, F. Mendable polymers. J. Mater. Chem. 2008, 18, 41–62. [Google Scholar] [CrossRef]
  9. Gandini, A. The furan/maleimide Diels–Alder reaction: A versatile click–unclick tool in macromolecular synthesis. Prog. Polym. Sci. 2013, 38, 1–29. [Google Scholar] [CrossRef]
  10. Adzima, B.J.; Aguirre, H.A.; Kloxin, C.J.; Scott, T.F.; Bowman, C.N. Rheological and chemical analysis of reverse gelation in a covalently cross-linked Diels-Alder polymer network. Macromolecules 2008, 41, 9112–9117. [Google Scholar] [CrossRef]
  11. Gou, Z.; Zuo, Y.; Feng, S. Thermally self-healing silicone-based networks with potential application in recycling adhesives. RSC Adv. 2016, 6, 73140–73147. [Google Scholar] [CrossRef]
  12. Truong, T.T.; Thai, S.H.; Nguyen, H.T.; Phung, D.T.T.; Nguyen, L.T.; Pham, H.Q.; Nguen, L.-T.T. Tailoring the hard-soft interface with dynamic Diels Alder linkages in polyurethanes: Toward superior mechanical properties and healability and mild temperature. Chem. Mat. 2019, 31, 2347–2357. [Google Scholar] [CrossRef]
  13. Orozco, F.; Li, J.; Ezekiel, U.; Niyazov, Z.; Floyd, L.; Lima, G.M.R.; Winkelman, J.G.M.; Moreno-Villoslada, I.; Picchioni, F.; Bose, R.K. Diels-Alder-based thermo-reversibly crosslinked polymers: Interplay of crosslinking density, network mobility, kinetics and stereoisomerism. Eur. Polym. J. 2020, 135, 109882. [Google Scholar] [CrossRef]
  14. Jiang, Y.; Hadjichristidis, N. Diels-Alder polymer networks with temperature-reversible cross-linking-induced emission. Angew. Chem. Int. Ed. 2021, 60, 331–337. [Google Scholar] [CrossRef] [PubMed]
  15. Gaina, V.; Ursache, O.; Gaina, C.; Buruiana, E. Novel thermally-reversible epoxy-urethane networks. Des. Monomers Polym. 2012, 15, 63–73. [Google Scholar] [CrossRef]
  16. Gaina, C.; Ursache, O.; Gaina, V.; Varganici, C.D. Poly(urethane-benzoxazine)s. J. Polym. Res. 2014, 21, 586. [Google Scholar] [CrossRef]
  17. Ratwani, C.R.; Kamali, A.R.; Abdelkader, A.M. Self-healing by Diels Alder cycloaddition in advanced functional polymers: A review. Prog. Mat. Sci. 2023, 131, 101001. [Google Scholar] [CrossRef]
  18. Gacal, B.; Durmaz, H.; Tasdelen, M.A.; Hizal, G.; Tunca, U.; Yagci, Y.; Demirel, A.L. Anthracene-maleimide-based Diels-Alder “click chemistry” as a novel route to graft copolymers. Macromolecules 2006, 39, 5330–5336. [Google Scholar] [CrossRef]
  19. Shah, S.; Tian, R.; Shi, Z.; Liao, Y. Side-chain free aromatic polyimides containing anthracene units via Diels-Alder precursors. J. Appl. Polym. Sci. 2009, 112, 2953–2958. [Google Scholar] [CrossRef]
  20. Yoshie, N.; Saito, S.; Oya, N. A thermally-stable self-mending polymer networked by Diels-Alder cycloaddition. Polymer 2011, 52, 6074–6079. [Google Scholar] [CrossRef]
  21. Alkayal, N.; Hadjichristidis, N. Well-defined polymethylene-based block co/terpolymers by combining anthracene/maleimide Diels-Alder reaction with polyhomologation. Polym. Chem. 2015, 6, 4921–4926. [Google Scholar] [CrossRef]
  22. Heo, Y.; Malakooti, M.H.; Sodano, H.A. Self-healing polymers and composite for extreme environments. J. Mater. Chem. A 2016, 4, 17403–17411. [Google Scholar] [CrossRef]
  23. Caliskan, E.; Shishatskiy, S.; Neumann, S.; Abetz, V.; Filiz, V. Investigation of the side chain effect on gas and water vapor transport properties of anthracene-maleimide based polymers of intrinsic microporosity. Polymers 2022, 14, 119. [Google Scholar] [CrossRef] [PubMed]
  24. Van Damme, J.; Du Prez, F. Anthracene-containing polymers toward high-end applications. Prog. Polym. Sci. 2018, 82, 92–119. [Google Scholar] [CrossRef]
  25. Briou, B.; Améduri, B.; Boutevin, B. Trends in the Diels-Alder reaction in polymer chemistry. Chem. Soc. Rev. 2021, 50, 11055–11097. [Google Scholar] [CrossRef]
  26. Grigoras, M.; Colontin, G. Copolymerization of a bisanthracene compound with bismaleimides by Diels-Alder cycloaddition. Polym. Int. 2001, 50, 1375–1378. [Google Scholar] [CrossRef]
  27. Raut, S.K.; Sarkar, S.; Mondal, P.; Meldrum, A.; Singha, N.K. Covalent adaptable network in an anthracenyl functionalized non-olefinic elastomer; a new class of self-healing elastomer coupled with fluorescence switching. Chem. Eng. J. 2023, 453, 139641. [Google Scholar] [CrossRef]
  28. Peng, Y.-J.; Cai, C.-T.; Wang, C.-J.; Zuo, Z.-F.; Liu, X.-Z. Probing the glass transition in reversible crosslinked polymer complexes. RSC Adv. 2019, 9, 15318. [Google Scholar] [CrossRef]
  29. Roquerol, J.; Toft Sørensen, O.; Barnes, P.; Charsley, E.L.; Fesenko, E.; Reading, M. Basic SCTA techniques. In Sample Controlled Thermal Analysis. Origin, Goals, Multiple Forms, Applications and Future; Toft Sørensen, O., Rouquerol, J., Eds.; Springer: Boston, MA, USA, 2003; pp. 16–61. [Google Scholar] [CrossRef]
  30. Gill, P.S.; Sauerbrunn, S.R.; Crowe, B.S. High resolution thermogravimetry. J. Therm. Anal. 1992, 38, 255–266. [Google Scholar] [CrossRef]
  31. Blaine, R.L.; Hahn, B.K. Obtaining kinetic parameters by modulated thermogravimetry. J. Therm. Anal. 1998, 54, 695–704. [Google Scholar] [CrossRef]
  32. Gonzales, A.; Irusta, L.; Fernández-Berridi, M.J.; Iriarte, M.; Iruin, J.J. Application of pyrolysis/gas chromatography/Fourier transform infrared spectroscopy and TGA techniques in the study of thermal degradation of poly(3-hydroxybutyrate). Polym. Degrad. Stab. 2005, 87, 347–354. [Google Scholar] [CrossRef]
  33. Kramer, R.K.; Carvalho, A.J.F. Non-freezing water sorbed on microcrystalline cellulose studied by high-resolution thermogravimetric analysis. Cellulose 2021, 28, 10117–10125. [Google Scholar] [CrossRef]
  34. Matesanz-Niño, L.; Aguilar-Lugo, C.; Prádanos, P.; Hernandez, A.; Bartolomé, C.; de la Campa, J.G.; Palacio, L.; González-Ortega, A.; Galizia, M.; Álvarez, C.; et al. Gas separation membranes obtained by partial pyrolysis of polyimides exhibiting polyethylene oxide moieties. Polymer 2022, 247, 124789. [Google Scholar] [CrossRef]
  35. Shih, Y.-F.; Jeng, R.-J. Thermal degradation behaviour and kinetic analysis of unsaturated polyester-based composites and IPNs by conventional and modulated thermogravimetric analysis. Polym. Degrad. Stab. 2006, 91, 823–831. [Google Scholar] [CrossRef]
  36. Aburto, J.; Moran, M.; Galano, A.; Torres-García, E. Non-isothermal pyrolysis of pectin: A thermochemical and kinetic approach. J. Anal. Appl. Pyrolysis 2015, 112, 94–104. [Google Scholar] [CrossRef]
  37. Ionita, D.; Cristea, M.; Cosmulescu, S.F.; Predeanu, G.; Harabagiu, V.; Samoila, P. Thermal and viscoelastic responses of selected lignocellulosic wastes: Similarities and differences. Polymers 2023, 15, 2100. [Google Scholar] [CrossRef]
  38. Mikroyannidis, J.A. Crosslinkable aromatic polyketones with maleimide pendent groups. J. Polym. Sci. A Polym. Chem. 1990, 28, 669–677. [Google Scholar] [CrossRef]
  39. Gaina, C.; Gaina, V.; Ciobanu, C. Thermal and mechanical characterization of maleimide-functionalized copoly(urethane-urea)s. J. Appl. Polym. Sci. 2009, 113, 3245–3254. [Google Scholar] [CrossRef]
  40. Gaina, V.; Gaina, C. New bismaleimide-epoxy resin system. Polym. Plast. Technol. Eng. 2009, 48, 525–529. [Google Scholar] [CrossRef]
  41. Gaina, V.; Gaina, C. Bismaleimides and biscitraconimides with bisallyl groups. High Perform. Polym. 2007, 19, 160–174. [Google Scholar] [CrossRef]
  42. Mustata, F.R.; Tudorachi, N. Epoxy resins cross-linked with rosin adduct derivatives. Cross-linking and thermal behaviors. Ind. Eng. Chem. Res. 2010, 49, 12414–12422. [Google Scholar] [CrossRef]
  43. Jagtap, A.R.; More, A. Developments in reactive diluents: A review. Polym. Bull. 2022, 79, 5667–5708. [Google Scholar] [CrossRef]
  44. Mustata, F. Polyhydroxyesterimides from renewable resources: Synthesis, characterization, properties. Int. J. Polym. Mat. 2011, 60, 1106–1122. [Google Scholar] [CrossRef]
  45. Liu, Y.-L.; Hsieh, C.-Y. Crosslinked epoxy materials exhibiting thermal remendability and removability from functional maleimide and furan compounds. J. Polym. Sci. A Polym. Chem. 2005, 44, 905–913. [Google Scholar] [CrossRef]
  46. Fang, Y.; Li, J.; Du, X.; Du, Z.; Cheng, X.; Wang, H. Thermal- and mechanical-responsive polyurethane elastomers with self-healing, mechanical-reinforced, and thermal-stable capabilities. Polymer 2018, 158, 166–175. [Google Scholar] [CrossRef]
  47. Varganici, C.-D.; Ursache, O.; Gaina, C.; Gaina, V.; Rosu, D.; Simionescu, B.C. Synthesis and characterization of a new thermoreversible polyurethane network. Ind. Eng. Chem. Res. 2013, 52, 5287–5295. [Google Scholar] [CrossRef]
  48. Gaina, C.; Gaina, V.; Ionita, D. Functional modification of poly(vinyl alcohol) with maleimide compounds. Polym. Bull. 2016, 73, 2019–2038. [Google Scholar] [CrossRef]
  49. Ursache, O.; Gaina, C.; Gaina, V.; Musteata, V.E. High performance bismaleimide resins modified by novel allyl compounds based on polytriazoles. J. Polym. Res. 2012, 19, 9969. [Google Scholar] [CrossRef]
  50. Gill, P.S.; Sauerbrunn, S.R.; Reading, M. Modulated differential scanning calorimetry. J. Therm. Anal. 1993, 40, 931–939. [Google Scholar] [CrossRef]
  51. Goldfarb, J.L.; Külatos, I. Melting points and enthalpies of fusion of anthracene and its heteroatomic counterparts. J. Therm. Anal. Calorim. 2010, 102, 1063–1070. [Google Scholar] [CrossRef]
  52. Racles, C.; Silion, M.; Stanica, N.; Cazacu, M.; Turta, C. New siloxane-containing iron (III) carboxylate clusters. J. Organomet. Chem. 2012, 711, 43–51. [Google Scholar] [CrossRef]
  53. Blaj, D.-A.; Kowalczuk, M.; Peptu, C. Mass spectrometry of esterified cyclodextrins. Molecules 2023, 28, 2001. [Google Scholar] [CrossRef] [PubMed]
  54. Konrad, W.; Bloesser, F.R.; Wetzel, K.S.; Boukis, A.C.; Meier, M.A.R.; Barner-Kowollik, C. A combined photochemical and multicomponent reaction approach to precision oligomers. Chem. Eur. J. 2018, 24, 3413–3419. [Google Scholar] [CrossRef] [PubMed]
  55. Huang, K.; Zhang, P.; Zhang, J.; Li, S.; Li, M.; Xia, J.; Zhou, Y. Preparation of biobased epoxies using tung oil fatty acid-derived C21 diacid and C22 triacid and study of epoxy properties. Green. Chem. 2013, 15, 2466–2475. [Google Scholar] [CrossRef]
  56. Nebhani, L.; Barner-Kowollik, C. Functionalization of fullerenes with cyclopentadienyl and anthracenyl capped polymeric building blocks via Diels-Alder chemistry. Macromol. Rapid Commun. 2010, 31, 1298–1305. [Google Scholar] [CrossRef]
Polymers 15 04028 sch001
Scheme 1. Synthesis of DGEBA-MIPA.
Scheme 1. Synthesis of DGEBA-MIPA.
Polymers 15 04028 sch001
Polymers 15 04028 sch002
Scheme 2. Synthesis of DGEBA-Anth (R: H) and DGEBA-allyl-Anth (R: -CH2-CH=CH2).
Scheme 2. Synthesis of DGEBA-Anth (R: H) and DGEBA-allyl-Anth (R: -CH2-CH=CH2).
Polymers 15 04028 sch002
Polymers 15 04028 g001
Figure 1. FTIR spectra of DGEBA and DGEBA-MIPA.
Figure 1. FTIR spectra of DGEBA and DGEBA-MIPA.
Polymers 15 04028 g001
Polymers 15 04028 g002
Figure 2. FTIR spectra of DGEBA-Anth (a), DGEBA-allyl-Anth (b), and DGEBA-allyl-Anth 300 (c). The inset figure details the signals of the allyl groups.
Figure 2. FTIR spectra of DGEBA-Anth (a), DGEBA-allyl-Anth (b), and DGEBA-allyl-Anth 300 (c). The inset figure details the signals of the allyl groups.
Polymers 15 04028 g002
Polymers 15 04028 g003
Figure 3. Conventional thermal degradation curves for DGEBA-MIPA, DGEBA-Anth, and DGEBA-allyl-Anth (20 °C/min, N2 environment): (a) TGA, (b) DTGA.
Figure 3. Conventional thermal degradation curves for DGEBA-MIPA, DGEBA-Anth, and DGEBA-allyl-Anth (20 °C/min, N2 environment): (a) TGA, (b) DTGA.
Polymers 15 04028 g003
Polymers 15 04028 g004
Figure 4. Conventional (20 oC/min) and HiRes thermal degradation curves for DGEBA-MIPA (N2 environment): (a) the constant heating rates are different; (b) the sensitivities (S) are different.
Figure 4. Conventional (20 oC/min) and HiRes thermal degradation curves for DGEBA-MIPA (N2 environment): (a) the constant heating rates are different; (b) the sensitivities (S) are different.
Polymers 15 04028 g004
Polymers 15 04028 g005
Figure 5. Conventional and HiRes thermal degradation curves for DGEBA-Anth (a) and DGEBA-allyl-Anth (b) (constant heating rate 20 °C/min, R3, S1, N2 environment).
Figure 5. Conventional and HiRes thermal degradation curves for DGEBA-Anth (a) and DGEBA-allyl-Anth (b) (constant heating rate 20 °C/min, R3, S1, N2 environment).
Polymers 15 04028 g005
Polymers 15 04028 g006
Figure 6. Thermal degradation curves obtained by MTGA (a) and the associated activation energy (b) all along the experiments.
Figure 6. Thermal degradation curves obtained by MTGA (a) and the associated activation energy (b) all along the experiments.
Polymers 15 04028 g006
Polymers 15 04028 g007
Figure 7. The result of DSC scans (heating 1–cooling–heating 2, 20 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-MIPA.
Figure 7. The result of DSC scans (heating 1–cooling–heating 2, 20 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-MIPA.
Polymers 15 04028 g007
Polymers 15 04028 g008
Figure 8. The result of DSC scans (heating 1,2 with 5 °C/min–cooling 1,2 with 10 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-Anth. The inset of Figure 8a details the endothermal signal of anthracene.
Figure 8. The result of DSC scans (heating 1,2 with 5 °C/min–cooling 1,2 with 10 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-Anth. The inset of Figure 8a details the endothermal signal of anthracene.
Polymers 15 04028 g008
Polymers 15 04028 g009
Figure 9. The result of DSC scans (heating 1,2,3 with 5 °C/min–cooling 1,2,3 with 10 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-allyl-Anth.
Figure 9. The result of DSC scans (heating 1,2,3 with 5 °C/min–cooling 1,2,3 with 10 °C/min) (a) and MDSC scans (3 °C/min) (b) for DGEBA-allyl-Anth.
Polymers 15 04028 g009
Polymers 15 04028 g010
Figure 10. Electrospray ionization mass spectrometry (ESI-MS) spectrum of DGEBA-allyl-Anth.
Figure 10. Electrospray ionization mass spectrometry (ESI-MS) spectrum of DGEBA-allyl-Anth.
Polymers 15 04028 g010
Polymers 15 04028 sch003
Scheme 3. Structure of F1.
Scheme 3. Structure of F1.
Polymers 15 04028 sch003
Polymers 15 04028 sch004
Scheme 4. Structure of F2.
Scheme 4. Structure of F2.
Polymers 15 04028 sch004
Table 1. The main thermal degradation characteristics of the investigated polyesters, from the conventional TGA results (heating rate 20 °C/min).
Table 1. The main thermal degradation characteristics of the investigated polyesters, from the conventional TGA results (heating rate 20 °C/min).
SampleTdeg onset (1)
(°C)		T10 (2)
(°C)		Residue (3)
(%)
DGEBA-MIPA352.0336.429.5
DGEBA-Anth193.7232.628.6
DGEBA-allyl-Anth198.5260.028.9
(1) The temperatures of the degradation onset evaluated with the software TRIOS 5.0 (TA Instruments, New Castle, DE, USA). The standard error is ±0.33 °C. (2) The temperature associated with 10% of the mass loss. The standard error is ±0.35 °C. (3) The residual mass at 675 °C.
Table 2. Negative ion electrospray ionization mass spectrometry (ESI-MS) data for the sample DGEBA-allyl-Anth.
Table 2. Negative ion electrospray ionization mass spectrometry (ESI-MS) data for the sample DGEBA-allyl-Anth.
zm/z Foundm/z CalculatedSpecies Assigned (1)M
2894.42894.37[F2–2H]2−1790.84
1896.45896.42[F1–2OH–H]−870.42
1930.39930.42[F1–H]−930.42
21753.781753.71[F4–2H]2−3509.56
11755.761775.74[F2–2OH–H]−1756.76
(1) The structures are presented in Scheme 3 and Scheme 4.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Ionita, D.; Cristea, M.; Gaina, C.; Silion, M.; Simionescu, B.C. Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins. Polymers 2023, 15, 4028. https://doi.org/10.3390/polym15194028

AMA Style

Ionita D, Cristea M, Gaina C, Silion M, Simionescu BC. Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins. Polymers. 2023; 15(19):4028. https://doi.org/10.3390/polym15194028

Chicago/Turabian Style

Ionita, Daniela, Mariana Cristea, Constantin Gaina, Mihaela Silion, and Bogdan C. Simionescu. 2023. "Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins" Polymers 15, no. 19: 4028. https://doi.org/10.3390/polym15194028

APA Style

Ionita, D., Cristea, M., Gaina, C., Silion, M., & Simionescu, B. C. (2023). Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins. Polymers, 15(19), 4028. https://doi.org/10.3390/polym15194028

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop