1. Introduction
One of the most well-known sequences in the world is the Fibonacci sequence,
, for any
with initial conditions
and
. This sequence has been studied for a long time and has been explored in many fields. It can be found in a variety of mathematical fields, such as abstract algebra and number theory. For example, in 1986, H.J. Wilcox [
1] established the Fibonacci sequence in a finite abelian group with inspiration from D.D. Wall [
2] and A.P. Shah [
3]. Both of them studied the Fibonacci sequence together with modulo some fixed integer
m. In 1990, S.W. Knox [
4] (in the spirit of [
1,
2,
3]) considered the
k-nacci sequence of a finite group. The development along this route has continued. In 2003, E. Özkan et al. [
5] provided some results with the Wall number of the ordinary three-step Fibonacci sequence
in a nilpotent group with nilpotency class 4 and exponent
p for a prime number
, defined by
where
, and
. In the same year, R. Dikici and E. Özkan [
6] also studied a similar sequence (
1) with the same initial data in a 3-generator relatively free group in the variety of nilpotent groups of class 2 and exponent
p but in a generalized version as
for fixed
. In 2020, the largest Fibonacci number, whose decimal expansion is of the form
, was found by P. Trojovský [
7]. Moreover, we can see applications of Fibonacci numbers in applied mathematics and computer science, as follows. A.F. Nematollahi et al. [
8] proposed a new metaheuristic optimization algorithm known as the golden ratio optimization method (GROM) that uses the golden ratio of the Fibonacci series to update the solutions in two different phases. This method is a parameter-free and simple implementation. Furthermore, GROM is very robust, and almost similar results have been obtained in different trials. F. Caldarola et al. [
9] showed that all the Carboncettus words thus defined are Sturmian words, except in the case of
, and the limit of the sequence of Carboncettus words is the Carboncettus limit word itself. These results originate from the Carboncettus octagon, a new geometric structure based on Fibonacci numbers which is similar to a regular octagon; see [
10]. Furthermore, the Fibonacci sequence has numerous essential applications in diverse fields, including aesthetic applications, as shown in [
11,
12,
13] or applications related to cross-branch testing, including probability theory [
14], statistical physics [
15], and education [
16,
17,
18].
In this paper, we combine “the metallic ratio” and “the pulsated Fibonacci sequence”, which generalize the concepts of the golden ratio and the Fibonacci sequence, respectively. To the best of our knowledge, this is the first work that provides a study on this topic. We give the definitions that we use below.
The metallic ratio was defined by D. Passoja [
12], in 2015, in the form of a continued fraction expansion. In addition, in 2020, R. Sivaraman [
19] tried to generalize the recurrence relations to produce a more general ratio from which golden, silver, and bronze ratios follow:
For a given positive integer
k as
where
and
for each
. Indeed, in 2011, O. Yayenie [
20] proposed a new type of generalized Fibonacci sequence
, which is defined recursively by
and
where
and
. Notice that in the case
, the above sequence is Sequence (
2). For special cases, we have
the golden ratio ,
the silver ratio , and
the bronze ratio . In addition, in 1985, the origin of the pulsated Fibonacci sequence was shown by K.T. Atanassov et al. [
21] who introduced a new perspective on the generalization of the Fibonacci sequence. After this, the generalization of pulsated Fibonacci sequences has been expressed. For example, in 2013, Atanassov [
22] constructed
the -pulsated Fibonacci sequence as follows:
where
and
. In the same year, the above sequence was modified by Atanassov [
23], which was called
the -pulsated Fibonacci sequence. The following year,
the -pulsated Fibonacci sequence [
24] was introduced and is described as follows:
where
such that
and
. In 2019,
the complex pulsating Fibonacci sequence was introduced by S. Halici and A. Karatas [
25] and is described as follows:
where
and
. Recent types of pulsating Fibonacci sequences were published in 2021 and 2022. One is referred to as the pulsating
-Fibonacci sequence [
26]. For real numbers
and
c,
the pulsating -Fibonacci sequence is defined by
where
, and
m are non-negative integers such that
, and
. Another one is referred to as
the complex pulsating -Fibonacci sequence [
27], which is given as follows. Let
and
c be real numbers. Then,
for any non-negative integers
and
m such that
.
However, the related problem of finding the metallic ratio, particularly the golden ratio, remains. The aim of this paper is to study the ratio of the consecutive terms of the following sequences. The first pulsating Fibonacci sequence to merge Sequences (
2) and (
3) is given by
where
,
, and
, such that
are not both zero simultaneously. By the pattern of pulsating of Sequence (
5), in even subscript, the green line represents sequence
, and the yellow line represents sequence
, which are symmetrical with each other. Moreover, while
,
and so on are shown in solid lines,
,
and so on are shown in dashed lines, where both types of lines are symmetrical; see
Figure 1.
Another sequence is in the same trace, but we consider the sequence (
4) in the case of
, shown as follows.
where
,
, and
, such that
, and
c are not all zero simultaneously; see
Figure 2.
Outline of the paper: In this paper, the main results are separated into two sections. In
Section 2, the metallic ratios of pulsated Fibonacci sequences are presented in Theorems 1 and 2. In order to pave the way for the main results, the auxiliary result is found for
, and
in Sequence (
6), which is shown in the first part of this section. In
Section 3, a new type of Fibonacci sequence introduced in 2016 by [
28]—namely, the bipolar Fibonacci sequence—is presented, and we extend some concepts of
Section 2 to this sequence; see Theorem 3. Both results in
Section 2 and
Section 3 are equivalent. In
Section 4, a discussion of the results and future work is presented. Lastly, in
Section 5, we summarize our results and suggest some conjectures.
3. Bipolar Pulsating Fibonacci Sequence
In this section, our aim is to provide a smooth connection between bipolar quantum linear algebra (BQLA), which was first introduced by W.R. Zhang, and a new type of recurrence relation, as in the pulsating Fibonacci sequence. The concept of bipolar and its applications—for example, bioeconomics, bipolar disorder, bipolar cognitive mapping, and metal square—are described in the monograph [
29]. Particularly, in chapter 8 of this monograph, Zhang used BQLA and bipolar quantum cellular automata (BQCA) to prove many laws, such as the symmetry law (or elementary energy equilibrium), energy transfer equilibrium law [
30], the law of energy symmetry (or YinYang-
n-element system nonequilibrium strengthening law) [
31]. Moreover, he delivered some conjectures related to symmetry. One of them is that antimatter–matter bipolar symmetry or broken symmetry is bipolar equivalent to contraction–expansion bipolar symmetry or broken symmetry.
For simplicity, we present the terminology that will be used in this section as follows. A bipolar dynamic equilibrium is a process of bipolar interaction and state change among bipolar equilibrium, non-equilibrium and eternal equilibrium states of any action–reaction pair or any collection of such pairs. A bipolar quantum agent (BQA) is a bipolar dynamic equilibrium. The set of all bipolar agents is the bipolar set . The norm of is . For , the addition of the bipolar set is defined as , and the multiplication of the bipolar set is defined as . Both operations have commutative and associative properties with the identities and , respectively. Moreover, in B is equivalent to in the sense that if we consider as a vector in space, the result shows that the vector is triply stretched. Hence, behaves as a constant in B, similar to how a behaves in .
Next, we introduce
the bipolar Fibonacci sequence, created by F. Marchetti [
28] in 2016,
for
, where
is the Fibonacci sequence, and
. To consider the golden ratio of
, Marchetti defined a new operation for BQLA as follows.
The division of the bipolar set is a defined set for
such that
,
This operation has a few points to be aware of, which are described in Remark 2.
In addition, we provide some properties of this division that contribute to our proof: , and for each . Furthermore, as , Marchetti showed that converges to , where , and this limit is sensible because is the constant in . However, the definition of the convergent sequence in B was not given.
In this paper, a bipolar agent
is said to be
the limit of a sequence in B or
a sequence converges to , denoted by
, if for every number
, there exists a natural number
N such that for any
, if
, then
where
, and
, for any
. Consequently, for any sequence
in B, we have that
if and only if
, and . Moreover, if , then .
Next, we aim to find the ratio of Sequences (
10) and (
11), which are inspired by sequence (
5) and a bipolar sequence from Marchetti.
For
and
satisfying Sequence (
5), we define the sequences
and
as follows:
where
,
,
,
,
, and
. Then, the sequence in (
10) is called
a bipolar pulsating Fibonacci sequence, which is depicted in
Figure 3.
Note that it is easy to show that , and for any using mathematical induction. Now, we are ready to investigate the metallic ratio of this sequence.
Theorem 3. Let and be a bipolar pulsating Fibonacci sequence as Sequence (10). Then, the bipolar pulsating metallic ratio is ,
.
Remark 1. Although and are in the bipolar set, and the ratios are computed by a more complicated division operation, their results and still associate with the results in Theorem 1, which are 2 and , respectively.
Proof. First, we consider for any
,
From the proof of Theorem 1, we recall that
,
, and
. Next, we consider part of Yin and part of Yang as follows. In part of Yin, we obtain
Since
, and
, we obtain
As a result, in part of Yang, the limit tends to 2. Hence, we have
. Next, for the sequence
, we have
Since
, and
, we can see that
and
Thus,
. In addition, we have
, and
From the fact that
for all
and Theorem 1, it follows that
and
hence,
. Consequently,
. In the same manner, since
, and
it implies that
Hence, we obtain . □
In the rest of this section, we consider Sequence (
10) as a special case to the following sequence.
Let
and
be sequences obtained from Sequence (
5) in the case of
. Then, we define the sequences
and
as follows:
where
,
,
,
, and
.
Corollary 3. For Sequence (11), the bipolar pulsating golden ratio is ,
.
Proof. The proof follows directly from Theorem 3 and the fact that is the identity of the multiplication. □
Finally, the following remark shows some points to be aware of when dividing in the bipolar set. This remark was adjusted from the comments in [
32].
Remark 2. Let . Then, if and only if it satisfies one of the following conditions.
4. Discussion
There are other forms of the pulsating sequence (
5) that appeared in the last part of [
21]. The following recurrence relations are other pulsating sequences in the same spirit as Sequence (
3).
where
,
, and
such that
are not both zero simultaneously.
where
,
, and
such that
are not both zero simultaneously.
where
,
, and
such that
are not both zero simultaneously. Under the condition
, it implies that the pulsating sequences (
5) and (
12) are the same sequence, and it also occurs in Sequences (
13) and (
14). So, the results of Theorem 1 can be applied to the pulsating sequence (
12). Furthermore, Sequence (
13) is similar to the origin sequence (
2), and in the same way as the proof of Theorem 1, we can reach forward the limit of
and
. As a result, the sequence (
14) outcomes will appear right away. That is why we only considered the form of the pulsating sequence (
5).
Returning to the original version of the bipolar Fibonacci sequence
for
, where
is the Fibonacci sequence, and
, for a fixed
, the standard form of the metallic ratio should be from the generalized bipolar Fibonacci sequence as follows. For
,
where
,
, and
. If we let
for all
, we automatically have a recurrence relation
, where
,
; then,
is the ordinary metallic ratio
. By the rule of the division of the bipolar set and the fact that
, the following ratio of Sequence (
15) is presented immediately
Hence, we see
plays a role as the metallic ratio of the sequence
, where
, and
. This is very similar to the original sequence (
2),
. So, instead, we examined a bipolar set and a pulsating sequence, which can be interwoven with concepts of the metallic means.
Notice that, in
Section 3, even though the algebraic operation of addition in the bipolar set is quite straightforward, it is different for the multiplication and the division of the bipolar set. To illustrate these operations, we examine two agents
and
in
B as vectors. From the results of
and
, we can see that
is a sum of two vectors, where one
is a vector twice the length of vector
in the opposite direction with respect to the line
in the
-plane, and another one is a triple stretch of a vector
.
The division operation of bipolar is defined from the inverse operation of multiplication under some conditions. It contains the same trend of multiplication in some cases, such as , and , but . Indeed, for any nonnegative real numbers a and b satisfied in Remark 2; then, it is a difference of two vectors and . So, we can see that the result from the division operation is more complicated. Surprisingly, this operation does not effect the results of the ratios in Theorem 3.
As mentioned previously in
Section 3, the behavior of
is that of a constant in
B, similar to how a constant
a performs in
. So, the results of the ratio in Theorem 3, i.e.,
and
should be equivalent to 2 and
, which are the results in Theorem 3. From these facts, we assert that, together with the same structure of recurrence relations in Sequences (
5) and (
10) and the intrinsic nature of the metallic ratio, this may dominate the novelty of the division operations of a bipolar set. In other words, if we look at these characteristics as if they were human genes, the novelty of the division has to be the recessive genes but the others are the dominant genes. Moreover, the phenomenon of the equivalent results between
Section 2 and
Section 3 is one of the indications that emphasize the celebrity number, the golden ratio. This number almost appears in everything (see [
33]), including arts, architecture, music and even bipolar concepts, which still did not seclude from
and its partisans. This is another reason that we proposed
Section 3 in this paper.
Finally, the elementary tools for solving the problems in this paper have prompted us to choose this concept for our students to work on in the active learning classroom to follow in the footsteps of S. Abramovich et al. [
34] in one of our future works. The others are Conjectures 1 and 2 at the end of
Section 5.