Next Issue
Volume 10, June
Previous Issue
Volume 10, April
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
7.2
3.6
Journals
Resources
Volume 10
Issue 5
share announcement

Resources, Volume 10, Issue 5 (May 2021) – 16 articles

Cover Story (view full-size image): This century is characterized by a greater awareness of products of natural origin and respect for the environment. As a result, the research on natural compounds that are preventive towards the onset of some pathologies has grown enormously. In parallel, new strategies have been developed to recover natural bioactive compounds from industrial waste. The agricultural and forestry wastes are considered by-products with low economic value, generally used as feed for livestock or fuel for domestic heating. In this context, the wide range of natural compounds found in by-products recovered from sustainable sources, including pistachio shells, represents a challenging research topic with possible economic and environmental benefits, which might involve markets such as cosmetic, pharmaceutical, food supplements or additives. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
19 pages, 8044 KiB  
Article
Environmental Transformation and the Current State of Hydrogeological Condition in the Wojkowice Area—Southern Poland
by Jacek Różkowski, Oimahmad Rahmonov, Roksana Zarychta and Adrian Zarychta
Resources 2021, 10(5), 54; https://doi.org/10.3390/resources10050054 - 20 May 2021
Cited by 6 | Viewed by 2361
Abstract
Based on the analysis and interpretation of maps, remote sensing data published in the literature, and environmental reconnaissance, this article discusses environmental transformations in the Wojkowice area in southern Poland (up to the year 2020). A comprehensive analysis was carried out concerning spatial [...] Read more.
Based on the analysis and interpretation of maps, remote sensing data published in the literature, and environmental reconnaissance, this article discusses environmental transformations in the Wojkowice area in southern Poland (up to the year 2020). A comprehensive analysis was carried out concerning spatial development, mining activity, hydrogeological conditions and the biotic environment. The current state of the hydrogeological conditions was also characterized. Mining activity in the vicinity of the studied town caused significant changes in its relief, which contributed to its area dropping by about 5 m. In fact, these terrain forms are overgrown by various forms of vegetation that colonized these areas both naturally and as a result of forest reclamation. The contemporary vegetation of Wojkowice differs from the potential natural vegetation, which is an indicator of the complete anthropogenization of the natural environment. Over 100 years of industrial activity in Wojkowice has also contributed to a strong transformation of the groundwater. There has been a quantitative depletion of usable groundwater in the Triassic and Carboniferous formations. With inflows to the ore mines of up to 17 m3/min, the groundwater table has dropped by more than 60 m. The aquifer of Muschelkalk has been practically drained. At present, wells extract the waters from the Röth aquifer. There has been a major transformation of groundwater chemistry. The waters of the Triassic carbonate complex are anthropogenically transformated and are characterized by increased mineralization, multi-ionic types and usually with a quality class III and IV, and, therefore, they require some treatment. Full article
►▼ Show Figures

Figure 1

17 pages, 3415 KiB  
Article
Enhancement of a District Heating Substation as Part of a Low-Investment Optimization Strategy for District Heating Systems
by Anna Vannahme, Mathias Ehrenwirth and Tobias Schrag
Resources 2021, 10(5), 53; https://doi.org/10.3390/resources10050053 - 19 May 2021
Cited by 3 | Viewed by 2925
Abstract
In an ongoing project, low-investment measures for the optimization of district heating systems are analyzed. The optimization strategies are collected in a catalog, which is the core of a guideline. The application of this guideline is demonstrated using two concrete district heating networks [...] Read more.
In an ongoing project, low-investment measures for the optimization of district heating systems are analyzed. The optimization strategies are collected in a catalog, which is the core of a guideline. The application of this guideline is demonstrated using two concrete district heating networks as examples. In this study, the improvement of an analog controlled district heating substation by an electronic controller is investigated. High supply temperatures and heat losses are often a challenge in district heating networks. The district heating substations have a major influence on the network return temperatures. The comparison of the two substation setups with analog and electronic controllers is carried out by laboratory measurement. It can be shown that the return temperatures can be reduced by an average of 20 K in winter and transition, as well as 16 K in summer. The district heating network losses are calculated for one of both specific district heating networks. They are calculated from the ratio of network losses to generated energy. The generated energy is the sum of network losses and consumer demand. The thermal losses of the network can be reduced by 3%. The volume flow in the heating network can be reduced to a quarter. Therefore, the pumping energy requirement drops sharply since these changes cubically affect the volume flow. Full article
(This article belongs to the Special Issue Planning, Simulation, Optimization and Operation of District Heating and Cooling Systems)
►▼ Show Figures

Figure 1

19 pages, 4280 KiB  
Article
A Method for Optimizing and Spatially Distributing Heating Systems by Coupling an Urban Energy Simulation Platform and an Energy System Model
by Annette Steingrube, Keyu Bao, Stefan Wieland, Andrés Lalama, Pithon M. Kabiro, Volker Coors and Bastian Schröter
Resources 2021, 10(5), 52; https://doi.org/10.3390/resources10050052 - 18 May 2021
Cited by 7 | Viewed by 3080
Abstract
District heating is seen as an important concept to decarbonize heating systems and meet climate mitigation goals. However, the decision related to where central heating is most viable is dependent on many different aspects, like heating densities or current heating structures. An urban [...] Read more.
District heating is seen as an important concept to decarbonize heating systems and meet climate mitigation goals. However, the decision related to where central heating is most viable is dependent on many different aspects, like heating densities or current heating structures. An urban energy simulation platform based on 3D building objects can improve the accuracy of energy demand calculation on building level, but lacks a system perspective. Energy system models help to find economically optimal solutions for entire energy systems, including the optimal amount of centrally supplied heat, but do not usually provide information on building level. Coupling both methods through a novel heating grid disaggregation algorithm, we propose a framework that does three things simultaneously: optimize energy systems that can comprise all demand sectors as well as sector coupling, assess the role of centralized heating in such optimized energy systems, and determine the layouts of supplying district heating grids with a spatial resolution on the street level. The algorithm is tested on two case studies; one, an urban city quarter, and the other, a rural town. In the urban city quarter, district heating is economically feasible in all scenarios. Using heat pumps in addition to CHPs increases the optimal amount of centrally supplied heat. In the rural quarter, central heat pumps guarantee the feasibility of district heating, while standalone CHPs are more expensive than decentral heating technologies. Full article
(This article belongs to the Special Issue Planning, Simulation, Optimization and Operation of District Heating and Cooling Systems)
►▼ Show Figures

Figure 1

16 pages, 3202 KiB  
Article
Carbon Sequestration Potential of Forest Invasive Species: A Case Study with Acacia dealbata Link
by Leonel J. R. Nunes, Mauro A. M. Raposo, Catarina I. R. Meireles, Carlos J. Pinto Gomes and Nuno M. C. Almeida Ribeiro
Resources 2021, 10(5), 51; https://doi.org/10.3390/resources10050051 - 17 May 2021
Cited by 13 | Viewed by 3746
Abstract
Biological invasions are of complex solution, consuming resources for their control and eradication. However, in many of the documented processes that are available, this is an attempt with no solution in sight. The possibility of increasing the pressure over these species while creating [...] Read more.
Biological invasions are of complex solution, consuming resources for their control and eradication. However, in many of the documented processes that are available, this is an attempt with no solution in sight. The possibility of increasing the pressure over these species while creating value chains has been presented as a method for ensuring the sustainability of their control and eradication processes. In the case of invasive forest species in Portugal, such as Acacia dealbata Link, this control is becoming increasingly important. In addition to the negative impacts on biodiversity, the proliferation of this species has economic implications due to its competition with forest production species such as Pinus pinaster Aiton and Eucalyptus globulus Labill. Another critical aspect to be considered is the increase of the risk of rural fires, which is enhanced by the accumulation of low-value biomass around production forests. In this work, the possibility of using this species as a vehicle for the capture and sequestration of carbon in the medium and long-term was evaluated from a perspective of providing ecosystem services as a measure to mitigate climate change. However, due to its highly heliophilous character, it was found that the growth capacity of this species is rapidly conditioned by the position of each tree within a stand, not being able to maintain that capacity in the medium and long term. Full article
(This article belongs to the Special Issue Assessment of Biomass for Bioenergy)
►▼ Show Figures

Figure 1

21 pages, 906 KiB  
Article
On the Possibilities of Critical Raw Materials Production from the EU’s Primary Sources
by Ewa Lewicka, Katarzyna Guzik and Krzysztof Galos
Resources 2021, 10(5), 50; https://doi.org/10.3390/resources10050050 - 17 May 2021
Cited by 64 | Viewed by 17158
Abstract
Sufficient supplies of critical raw materials (CRMs) for rapidly developing technologies, e.g., Li-ion batteries, wind turbines, photovoltaics, digitization, etc., have become one of the main economic challenges for the EU. Due to growing import dependency and associated risk of supply disruptions of these [...] Read more.
Sufficient supplies of critical raw materials (CRMs) for rapidly developing technologies, e.g., Li-ion batteries, wind turbines, photovoltaics, digitization, etc., have become one of the main economic challenges for the EU. Due to growing import dependency and associated risk of supply disruptions of these raw materials from third countries, there is a need to encourage their domestic production. This is an important starting point for EU value chains crucial for the sustainable economic growth of the whole Union. This contribution has evaluated the possibilities of CRMs supply from the EU’s primary sources. A three-step approach, including an assessment of CRMs’ importance for the EU’s economic growth, their significance in at least two of the three strategic industrial sectors (i.e., renewable energy, e-mobility, defense and aerospace), and their potential availability from EU mineral deposits, has been applied. Results of the analysis have shown that, of 29 critical mineral raw materials (according to the 2020 EC list), the potential to develop manufacturing from the Union mineral deposits exists for 11 CRMs, i.e., cobalt, graphite (natural), HREE, LREE, lithium, magnesium, niobium, PGMs, silicon metal, titanium, and tungsten, while some other CRMs, namely gallium, germanium, indium, and vanadium can be recovered as by-products. Measures to mitigate EU import dependency have been also proposed. Full article
(This article belongs to the Special Issue Mineral Deposit Safeguarding in the EU)
►▼ Show Figures

Figure 1

25 pages, 655 KiB  
Article
Towards Circular Economy—A Comparative Analysis of the Countries of the European Union
by Ewa Mazur-Wierzbicka
Resources 2021, 10(5), 49; https://doi.org/10.3390/resources10050049 - 13 May 2021
Cited by 47 | Viewed by 7930
Abstract
There are many studies which implement and assess existing measurement manners and document the progress of entities towards the circular economy (CE) at various levels, or present or propose new possibilities of measurement. The majority of them refer to the micro level. The [...] Read more.
There are many studies which implement and assess existing measurement manners and document the progress of entities towards the circular economy (CE) at various levels, or present or propose new possibilities of measurement. The majority of them refer to the micro level. The aim of this paper is to conduct a multidimensional comparative analysis of the implementation of circular economy by EU countries. After an in-depth critical analysis of the literature, CE indicators which were proposed by the European Commission were adopted as a basis. Owing to the research population-Member States of the European Union (EU-28), focusing on the said indicators was declared reasonable in all aspects. The classification of EU countries according to the level of their advancement in the concept of CE was adopted as a main research task. In order to do so, a relevant index of development of circular economy was created (IDCE). This will allow us, inter alia, to trace changes in the spatial differentiation of advancement of the EU countries in implementing CE over the years, to identify CE implementation leaders as well as countries particularly delayed in this regard. The comparative analysis was conducted by means of statistical methods. On the basis of the analyses, it was concluded that among all EU countries, those of the old EU are the most advanced in terms of CE. The analysis confirmed significant rising trends for IDCE only in the case of Belgium and The Netherlands. Full article
(This article belongs to the Special Issue Responsible Resource Management in Micro and Macro Scale)
►▼ Show Figures

Figure 1

32 pages, 2005 KiB  
Article
Safeguarding of Key Minerals Deposits as a Basis of Sustainable Development of Polish Economy
by Alicja Kot-Niewiadomska, Krzysztof Galos and Jarosław Kamyk
Resources 2021, 10(5), 48; https://doi.org/10.3390/resources10050048 - 11 May 2021
Cited by 4 | Viewed by 4603
Abstract
Secure and sustainable supply of minerals is important for the stable development of a country’s economy, as well as the global economy. Poland’s economic performance—as a dynamically developing country—is also largely dependent on the availability of minerals and security of their supplies both [...] Read more.
Secure and sustainable supply of minerals is important for the stable development of a country’s economy, as well as the global economy. Poland’s economic performance—as a dynamically developing country—is also largely dependent on the availability of minerals and security of their supplies both from internal sources and form imports. In Poland, 42 key minerals—i.e., those of fundamental importance for the proper functioning of the economy and satisfying the living needs of the society—have been recently indicated. From among them, 19 key minerals have been recognized by authors as having a proven resource base in Poland and—on the other hand—having moderately- or strongly growing domestic consumption trends. An assessment of the mineral resource base for their production, a sufficiency of the resources of developed deposits, as well as possible means of undeveloped deposits safeguarding were analyzed and discussed. It was found that the long-term needs of the Polish industry can be satisfied only for some of them: coking coal, copper, and silver, as well as numerous industrial and construction minerals. Moreover, existence of a sufficient resource base and appropriate means of their safeguarding may potentially have a significant impact on Poland’s and Europe’s minerals security, in particular regarding several minerals for which Poland is an important supplier to the European market, i.e., coking coal, copper, silver, and elemental sulfur. Full article
(This article belongs to the Special Issue Mineral Deposit Safeguarding in the EU)
►▼ Show Figures

Figure 1

17 pages, 449 KiB  
Article
Dynamic Reactive Power Compensation in Power Systems through the Optimal Siting and Sizing of Photovoltaic Sources
by Andrés Felipe Buitrago-Velandia, Oscar Danilo Montoya and Walter Gil-González
Resources 2021, 10(5), 47; https://doi.org/10.3390/resources10050047 - 11 May 2021
Cited by 12 | Viewed by 3615
Abstract
The problem of the optimal placement and sizing of photovoltaic power plants in electrical power systems from high- to medium-voltage levels is addressed in this research from the point of view of the exact mathematical optimization. To represent this problem, a mixed-integer nonlinear [...] Read more.
The problem of the optimal placement and sizing of photovoltaic power plants in electrical power systems from high- to medium-voltage levels is addressed in this research from the point of view of the exact mathematical optimization. To represent this problem, a mixed-integer nonlinear programming model considering the daily demand and solar radiation curves was developed. The main advantage of the proposed optimization model corresponds to the usage of the reactive power capabilities of the power electronic converter that interfaces the photovoltaic sources with the power systems, which can work with lagging or leading power factors. To model the dynamic reactive power compensation, the η-coefficient was used as a function of the nominal apparent power converter transference rate. The General Algebraic Modeling System software with the BONMIN optimization package was used as a computational tool to solve the proposed optimization model. Two simulation cases composed of 14 and 27 nodes in transmission and distribution levels were considered to validate the proposed optimization model, taking into account the possibility of installing from one to four photovoltaic sources in each system. The results show that energy losses are reduced between 13% and 56% as photovoltaic generators are added with direct effects on the voltage profile improvement. Full article
►▼ Show Figures

Figure 1

18 pages, 1542 KiB  
Article
Assessment of the Accumulation Ability of Festuca rubra L. and Alyssum saxatile L. Tested on Soils Contaminated with Zn, Cd, Ni, Pb, Cr, and Cu
by Agnieszka Pusz, Magdalena Wiśniewska and Dominik Rogalski
Resources 2021, 10(5), 46; https://doi.org/10.3390/resources10050046 - 9 May 2021
Cited by 19 | Viewed by 3530
Abstract
The contamination of soils with metals applies, in particular, to areas related to industry, the mining of raw materials and ores, transport, and agriculture. Unlike organic materials, metals cannot degrade over time and need to be reduced, removed, or immobilized in soil. One [...] Read more.
The contamination of soils with metals applies, in particular, to areas related to industry, the mining of raw materials and ores, transport, and agriculture. Unlike organic materials, metals cannot degrade over time and need to be reduced, removed, or immobilized in soil. One of the remediation methods for soils contaminated with metals is phytoextraction, which uses plants’ ability to accumulate metals in their own tissues. Metals enter the plant organism through the roots and are transported to the aboveground parts, where they are accumulated. In this study, we evaluated the phytoaccumulative abilities of two plant species tested on soils from industrial areas contaminated with metals to different extents (Zn, Cd, Ni, Pb, Cr, and Cu). The research was conducted for three years under the conditions of a pot experiment. In order to obtain four soils with varying degrees of metal contamination, two soils from industrial areas, G1 (contaminated) and G2 (uncontaminated), were mixed in the following ratios: 1:1, 1:3, 1:7, and 1:9. In the phytoremediation process, Festuca rubra L. and Alyssum saxatile L. were tested. After analyzing the results of the bioconcentration factor (BCF) for the tested plants, it was noted that both of the tested plants accumulated Cd and Zn more easily, followed by Cu, Ni, and Cr, and then Pb to a lesser extent. The values of factors for Cd and Zn were correlated with the high mobility of these elements compared to other metals and their relatively easy uptake by plants. Alyssum saxatile L. has an ability to accumulate Cd compared to Festuca rubra L., which is confirmed by the BCF (0.764) and transfer factor (TF) (3.5) (for 1:7 combination) values. The calculated results for the BCFs for Alyssum saxatile L. are less than one for all tested metals, which allows us to state that Alyssum saxatile L. is not an accumulator. Full article
►▼ Show Figures

Figure 1

17 pages, 1904 KiB  
Article
Valorization of Agri-Food Waste from Pistachio Hard Shells: Extraction of Polyphenols as Natural Antioxidants
by Nunzio Cardullo, Melania Leanza, Vera Muccilli and Corrado Tringali
Resources 2021, 10(5), 45; https://doi.org/10.3390/resources10050045 - 8 May 2021
Cited by 29 | Viewed by 5074
Abstract
The agricultural processing industry usually generates a remarkable amount of by-products rich in bioactive compounds, which can be exploited for agri-food or nutraceutical applications. Pistachio’s hard shell is one of the major by-products from pistachio industrial processing. The aim of this work was [...] Read more.
The agricultural processing industry usually generates a remarkable amount of by-products rich in bioactive compounds, which can be exploited for agri-food or nutraceutical applications. Pistachio’s hard shell is one of the major by-products from pistachio industrial processing. The aim of this work was the evaluation of pistachio shells as a potential source of natural antioxidants. We evaluated different extraction procedures by measuring total phenolic content, total flavonoid content and antioxidative activity (DPPH•, TEAC and ORAC). The microwave-assisted ethanol extract turned out to be the most promising and was fractionated by XAD-16 column chromatography, affording six fractions analyzed through HPLC/ESI-MS/MS and 1H-NMR to identify the main antioxidative constituents. Fractions Fr4–Fr6 demonstrated the highest antioxidant activity. Gallic acid and a monogalloylglusose isomer are the main phenolic constituents of Fr4. Both simple and complex phenolics, such as flavonoids and hydrolysable tannins, were identified in fractions Fr5 and Fr6; pentagalloylglucose and kaempferol, well-known for their antioxidant activity, are the most abundant constituents. The results highlighted that the proposed methodology can be an effective way to recover bioactive phenolic compounds from pistachio hard shell, making this by-product a promising source of compounds with potential applications in food and healthcare sectors. Full article
(This article belongs to the Special Issue Value-Added Compounds from Compost, Digestate and Agro-Industrial Waste)
►▼ Show Figures

Figure 1

23 pages, 1538 KiB  
Article
Multi-Criteria Analysis of Smart Cities on the Example of the Polish Cities
by Sławomira Hajduk
Resources 2021, 10(5), 44; https://doi.org/10.3390/resources10050044 - 8 May 2021
Cited by 22 | Viewed by 3819
Abstract
This paper presents the application of a Multi-Criteria Decision Making (MCDM) method for the ranking of smart cities. During the construction of the MCDM techniques, the importance of the decision-making approach for the linear ordering of 66 Polish cities with powiat status was [...] Read more.
This paper presents the application of a Multi-Criteria Decision Making (MCDM) method for the ranking of smart cities. During the construction of the MCDM techniques, the importance of the decision-making approach for the linear ordering of 66 Polish cities with powiat status was presented. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) was used for evaluation. The method has been verified by applying it to measure urban smartness. The TOPSIS method allowed compilation for a final ranking, taking into account publicly available indicators of the smart cities concept. The work uses data from the Local Data Bank Polish Central Statistical Office (LDB). The author conducted a literature review of research papers related to smart cities and MCDM methods dated from 2010 to 2020. Based on calculations using the TOPSIS method, the results obtained that the city of Krakow has the highest value to become a smart city. Full article
►▼ Show Figures

Figure 1

14 pages, 7307 KiB  
Article
Risk Assessment of Lack of Water Supply Using the Hydraulic Model of the Water Supply
by Krzysztof Boryczko, Izabela Piegdoń, Dawid Szpak and Jakub Żywiec
Resources 2021, 10(5), 43; https://doi.org/10.3390/resources10050043 - 5 May 2021
Cited by 15 | Viewed by 3764
Abstract
Modern management of water supply systems is based on a preventive strategy consisting of the prevention of failures and crisis situations. Water pipe failures resulting in a lack of water supply for a long period pose a threat to the water consumers safety. [...] Read more.
Modern management of water supply systems is based on a preventive strategy consisting of the prevention of failures and crisis situations. Water pipe failures resulting in a lack of water supply for a long period pose a threat to the water consumers safety. The aim of the work was to present the methodology and develop a risk map of lack of water supply to consumers. The article presents a failures simulation of the main pipes transporting treated water from the water treatment plant to the city carried out using the EPANET 2.0. software. The simulation results made it possible to determine the consequences of failures by determining the number of inhabitants (consumers) affected with lack of water supply as a result of failure of the main pipes near the water treatment plant WTP which, together with the failure rate, were used to prepare risk maps of lack of water supply. The developed method was presented on the water supply network located in Central and Eastern Europe. It was found that the highest risk of lack of water supply is related to the failure of the M3 main pipe, which transports water to the eastern and north-eastern parts of the city. It is recommended to modernize the M3 main pipe, which will reduce the number of failures resulting in a lack of water supply. Full article
(This article belongs to the Special Issue Advances in Water Resource Monitoring and Modelling: Water Quantity and Quality Issues)
►▼ Show Figures

Figure 1

28 pages, 7685 KiB  
Article
Lamination and Its Impact on the Physical and Mechanical Properties of the Permian and Triassic Terrestrial Sandstones
by Beata Figarska-Warchoł and Marek Rembiś
Resources 2021, 10(5), 42; https://doi.org/10.3390/resources10050042 - 1 May 2021
Cited by 3 | Viewed by 3279
Abstract
The sandstones with a laminated structure are common building materials. Lamination is macroscopically expressed as colour and grain size variations observed both in the deposit and within individual beds; therefore, the properties of such sandstones are diverse depending on the spatial distribution of [...] Read more.
The sandstones with a laminated structure are common building materials. Lamination is macroscopically expressed as colour and grain size variations observed both in the deposit and within individual beds; therefore, the properties of such sandstones are diverse depending on the spatial distribution of the binding mass and framework components. For the terrestrial sandstones of different genesis, four types of laminae have been distinguished based on petrographic studies. They have a siliceous binder or a mixed ferruginous–siliceous–argillaceous binder with different proportions of these components. In laminae of types I–III, the grain framework is built mainly of quartz grains, and in type IV, it is accompanied by numerous lithoclasts and feldspars. Knoop hardness and CERCHAR abrasivity were tested in each lamina variety, and the results were correlated with the equivalent quartz content and the longitudinal ultrasonic wave velocity measured perpendicular and parallel to the lamination. The proposed research methodology was not used in previous studies on terrestrial laminated sandstones. The results explain a strong dependence between mineral composition, structure of laminae, and technical parameters of rocks. The knowledge of this relationship facilitates the selection of rocks that meet the relevant technical requirements and helps to optimally manage the resources of sandstone deposits. Full article
(This article belongs to the Special Issue Mineral Resource Management: Assessment, Mining and Processing)
►▼ Show Figures

Figure 1

23 pages, 1919 KiB  
Article
Interlinkages between Government Resources Management, Environmental Support, and Good Public Governance. Advanced Insights from the European Union
by Gratiela Georgiana Noja, Mirela Cristea, Eleftherios Thalassinos and Marta Kadłubek
Resources 2021, 10(5), 41; https://doi.org/10.3390/resources10050041 - 30 Apr 2021
Cited by 13 | Viewed by 3341
Abstract
Good governance requires efficiency and effectiveness in public sector management, a sound legal framework, enhanced coordination, credibility, and transparency of the actions that support financial stability. Connecting these actions, there are significant interlinkages between government spending management and economic development. The research conducted [...] Read more.
Good governance requires efficiency and effectiveness in public sector management, a sound legal framework, enhanced coordination, credibility, and transparency of the actions that support financial stability. Connecting these actions, there are significant interlinkages between government spending management and economic development. The research conducted within this paper is set to assess the overall relationships within general government spending management, with a keen focus on government support for environmental protection and good public governance at the European Union (EU) level. The study investigates the cumulative effects of good public governance dimensions on economic welfare and poverty lessening. The dataset covers the period 1995–2017, and the methodological credentials are based on the structural equation modelling technique. The main results indicate that not only does government expenditure (including environmental support) shape good public governance, but the enhancements in good governance dimensions also have important spillovers on government spending regarding significant bidirectional connections. As for the overall implications, the estimations show that only general government expenditure has induced welfare increases, while environmental support does not generate the same positive effects. Ultimately, the all-embracing impact of considered governance dimensions is beneficial, leading to a downsizing of poverty within the EU. Full article
(This article belongs to the Special Issue Bioeconomy, Energy, Logistics, Environmental Issues and Sustainable Resource Management)
►▼ Show Figures

Figure 1

16 pages, 2958 KiB  
Article
Current Status of Circular Economy Research in Finland
by Aida Hosseinian, Jenni Ylä-Mella and Eva Pongrácz
Resources 2021, 10(5), 40; https://doi.org/10.3390/resources10050040 - 25 Apr 2021
Cited by 18 | Viewed by 9156
Abstract
Circular economy has emerged as a sustainable alternative to the traditional, linear, extract-produce-use-dump economy. The scientific society, practitioners, policymakers, and business sectors are all actively taking part in driving the transition toward circular economy in their own sectors. Every sector is striving to [...] Read more.
Circular economy has emerged as a sustainable alternative to the traditional, linear, extract-produce-use-dump economy. The scientific society, practitioners, policymakers, and business sectors are all actively taking part in driving the transition toward circular economy in their own sectors. Every sector is striving to address the environmental issues of their own area, and to find solutions to the problem of resource scarcity. However, there is a lack of comprehensive studies on the general status of circular economy research and applied projects. Finland aims to be a global pioneer in this field, which is why there is a tremendous boost in research in various fields of sustainable materials management. Therefore, there is a need to have a better perspective of the research society’s efforts to accelerate the transition to circular economy. The objective of this paper is to review scientific research and practices of circular economy transition in Finland, in order to categorize and analyze them. The paper aims to give an insight into the current status and provide a comprehensive understanding of the trend changes during the past 20 years. The analysis shows that there is growing attention to circular economy in many research fields, researchers and practitioners in all fields have responded to the need of the society. However, the recycling-based ‘end-of-pipe’ interpretation of circular economy is still more dominant than developing and implementing strategies for circular product design, dematerializing society, and developing service-based business models. It is important to bear in mind that circular economy is about much more than improved resource flows and waste management practices. Achieving a circular economy needs the engagement of the society, it needs invention and innovation and it also requires the creation of new technologies, products, services, and business models. This study gives a comprehensive perspective at the national level and addresses the key actions and sectors which require more investment and attention from the scientific community to boost the transition toward circular economy. There are some limitation in this study derived from the method of data collection and selection of databases. Due to this, there may be valuable works that were not published, or only in the Finnish language and were, therefore, not identified in this study. Full article
(This article belongs to the Special Issue Municipal and Industrial Waste Management)
►▼ Show Figures

Figure 1

23 pages, 2785 KiB  
Article
Impact of Covid-19 on the Mining Sector and Raw Materials Security in Selected European Countries
by Andrzej Gałaś, Alicja Kot-Niewiadomska, Hubert Czerw, Vladimir Simić, Michael Tost, Linda Wårell and Slávka Gałaś
Resources 2021, 10(5), 39; https://doi.org/10.3390/resources10050039 - 23 Apr 2021
Cited by 31 | Viewed by 12119
Abstract
Events that change the global economy rapidly, without warning, in principle strongly affect mining, which is one of the pillars of global development. After the first months of the Covid-19 pandemic, the mining pillar seems to be relatively stable. In this study, thanks [...] Read more.
Events that change the global economy rapidly, without warning, in principle strongly affect mining, which is one of the pillars of global development. After the first months of the Covid-19 pandemic, the mining pillar seems to be relatively stable. In this study, thanks to the meeting of an international team, it was possible to collect and compare a set of data on the impact on mining. In contrast to the general assessments of the stability of the mining sector, the authors decided to assess the impact of Covid-19 at individual stages of the mining project life cycle. In this way, it was possible to identify the most impacted fragments of the mining pillar. It was assessed that the highest influence of Covid-19 is observed in projects implementing feasibility studies and in projects for the development of new mines. The same is true of extracting residual resources in mines prior to the closure decision. The medium impact was confirmed at the exploration and discovery stage. The authors conclude that the impact on the current mining production is smaller and the effects in this case are short term, which is mainly due to a continued strong demand for minerals in China, which has balanced the weaker demand in other parts of the world. On the other hand, stopping the exploration and development of new mines will have a long-term impact, including an increased possibility of disruption of the future security of supplies of raw materials. Full article
(This article belongs to the Special Issue Mineral Deposit Safeguarding in the EU)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-16
Previous Issue
Next Issue
Back to TopTop