4.3.1. Isolated Dark Atom of O-Helium
It is known that in an alternating electric field created by the external nucleus, a dark atom should experience the Stark effect, which leads to the polarization of OHe. This should cause dipole Coulomb repulsion of the dark atom from the nucleus and the formation of a bound state of O-helium with this nucleus, determined by the well in front of the dipole Coulomb barrier in the effective interaction potential.
In order to restore with great accuracy the form of the effective interaction potential in the
OHe–nucleus system, it is necessary to accurately calculate the Stark potential, which determines the interaction of a polarized dark atom (
OHe dipole) with a charged nucleus of a heavy element. The Stark potential should have a fairly strong influence on the depth of the potential well, which characterizes the low-energy bound state of
OHe with the nucleus of matter, and on the height of the dipole Coulomb barrier, leading to the repulsion of the dark atom and the nucleus of matter and preventing their fusion in the corresponding effective interaction potential. To do this, it is necessary to quantum-mechanically calculate the dipole moments
of a dark atom polarized under the influence of an alternating external electric field (Stark effect) since the shape of the Stark potential depends on the value of the dipole moment
according to the following formula:
where
is the strength of the external electric field created by the nucleus of the heavy element.
For an accurate quantum mechanical calculation of the dipole moment of a polarized dark matter atom, in addition to the wave functions of helium corresponding to its ground state in the
OHe–nucleus system, it is also necessary to calculate the wave function of the ground state of helium in an isolated (non-polarized)
OHe atom. Therefore, to begin with, we considered
, that is, the Hamiltonian of an isolated (not subject to external influences)
OHe dark matter atom. Having represented the operator
in the form of a matrix, using a difference scheme, the eigenvalues of the Hamilton operator were numerically calculated, which are equal to the energies of helium
in an isolated atom
OHe, and its eigenvectors, which are equal to the
-functions of helium in
O-helium, i.e., solve the following one-dimensional Schrodinger equation:
or presented in another form:
where
is the radius vector of the helium nucleus in the coordinate system with the origin at the center of the
particle.
Theoretical calculations show that the energy levels of helium in the dark atom of
OHe,
obey the following pattern, by analogy with the hydrogen atom:
where
n is any natural number,
is the fine structure constant, and
is the energy level of the ground state of helium in
O-helium or
.
As a result of the numerical solution of the one-dimensional Schrodinger Equation (
63) with the helium radius vector interval
, the first three eigenvalues of the Hamilton operator
were numerically obtained:
. Theoretical calculation (
65) of the first three helium energy levels in the dark atom of
O-helium gives the following results:
. As can be seen from the results obtained, the first two energy levels obtained using numerical calculations are consistent with the theoretical values up to hundredths of values after the decimal point. For a quantum mechanical numerical calculation of the dipole moment of polarized
OHe, it is enough for us to know the wave function corresponding to the first level of helium energy in an isolated
O-helium atom.
It is possible to construct a discrete spectrum of helium energy levels in the dark atom potential and plot the graphs of the squared modulus of the wave function corresponding to these energy levels (
Figure 12, which shows the first three energy levels).
4.3.2. Quantum-Mechanical Description of the Three-Body Problem in the OHe-Nucleus System
The three-body problem we are considering is described by the system XHe–nucleus. First, let us consider a special case of this system, when the XHe dark atom is a hydrogen-like O-helium Bohr atom. The origin of the coordinate system we have chosen is at the center of the particle , which interacts with the point-like nucleus of by the Coulomb force and forms a connected dark matter atom system with it. The dark atom of OHe is in an external inhomogeneous electric field created by a third particle, which is the nucleus with charge number , number of neutrons and mass number A. This nucleus is gradually approaching the dark atom system, participating with it in electrical and strong nuclear interactions.
The Hamiltonian for the helium nucleus can be represented as:
where
is the Hamiltonian of an isolated (not subject to external influences)
OHe atom of dark matter, and
is the potential of the interaction of helium with the outer nucleus.
Let us introduce the following vectors:
,
and
, where
is the vector of the mutual distance between the particle
and the helium nucleus,
is the radius vector of the outer nucleus, and
is the vector drawn from the center of
to the center of the outer nucleus. These vectors are connected as follows:
Let us write
and
:
where
is the potential energy of the nuclear interaction, which we first write as the Woods–Saxon potential, and
is the potential of the Coulomb interaction between a point-like helium nucleus and a non-point-like nucleus of a heavy element.
The nuclear potential will be calculated depending on the distance between the neutron distribution surfaces of interacting nuclei, that is,
is determined by the following expression:
where
is the root-mean-square radius of the neutron distribution in the nucleus of the heavy element,
is the root-mean-square radius of the neutron distribution in helium,
is the depth of the potential well (for the sodium nucleus equal to approximately 43 MeV),
p is the diffuseness parameter equal to approximately
.
The radii
and
are calculated as follows [
72]:
where
is the deformation parameter of the matter nucleus and helium nucleus, respectively (for the sodium nucleus, the deformation parameter was made equal to
, the helium nucleus was considered as spherically symmetric; therefore, the deformation parameter of the helium nucleus was made equal to zero),
is the half radius of the neutron distribution in the nucleus of matter and the helium nucleus, respectively, and it is determined through the number of neutrons
N and the number of protons
Z of the corresponding nucleus:
and
is a dimensional parameter that also depends on the number of protons
Z and the number of neutrons
N of the corresponding nucleus:
The potential of the Coulomb interaction between a point helium nucleus and a nucleus of matter with a radius equal to the root-mean-square radius of the proton distribution,
,
is calculated using the following formula:
where
is calculated as follows [
72]:
is the half radius of the distribution of protons in the nucleus, calculated using the charge number and the number of neutrons in the nucleus of the heavy element:
and
is a dimensional parameter, also determined by the number of protons and the number of neutrons of the nucleus of the heavy element:
Consequently, the Hamiltonian for helium in the system OHe–nucleus depends on the radius vectors and . However, by fixing the value of and successively changing the position of the heavy nucleus, i.e., by varying the value of the vector , we can obtain a set of Schrodinger equations depending only on , each of which corresponds to a certain position of the outer nucleus relative to the dark atom.
Thus, the following Schrodinger equation needs to be solved:
or expanding
and performing some transformations:
Representing the Hamilton operator in the form of a matrix using a difference scheme, one can numerically calculate the eigenvalues of the operator , which are equal to the energies of helium E in the system OHe–nucleus for each fixed position of the outer nucleus of matter. The eigenvectors of the Hamiltonian are also calculated, which are -functions of for a given system.
To do this, in addition to representing the Laplace operator in the form of a matrix, it is also necessary to reconstruct the matrix form of the potential in which the helium nucleus is located for each fixed value of
:
Figure 13 shows an example of the reconstructed total interaction potential of the helium in the system
OHe–
,
, depending on the radius of the helium vector
for a fixed value of the radius vector
of the outer nucleus
.
Figure 13 shows the Coulomb and nuclear interaction potentials between the helium and the sodium nucleus, as well as the Coulomb potential between the helium and the
particle and the total interaction potential for the helium nucleus in the
OHe–
system.
Thus, the quantum mechanical description and numerical solution of the three-body problem in the system OHe–nucleus is based on the numerical solution of the Schrodinger equations for the helium nucleus in the OHe–nucleus system for each fixed position of the outer nucleus, using the representation of the Hamilton operator of the helium nucleus in matrix form and the numerical calculation of its eigenvalues and eigenvectors, which are equal to the energies and -functions of helium in the OHe–nucleus system, respectively.
4.3.3. Solution of the Schrodinger Equations for in the OHe–Nucleus System
In the absence of the outer nucleus of matter, the dark matter atom is not polarized, and the ground state of helium in
OHe has an energy level of approximately
. After the outer nucleus begins to approach the dark atom, it is polarized due to the influence of the alternating electric field created by the nucleus of the heavy element on it— the Stark effect occurs,
OHe has a non-zero dipole moment, and the dark matter atom begins to interact with the nucleus of matter as a dipole. The corresponding interaction can be described using the Stark potential (see Formula (
62)). The dark atom hypothesis assumes that in the effective potential of interaction between
OHe and the nucleus of the heavy element, a dipole barrier should arise that will not allow dark matter atom particles to enter the nucleus, and a low-energy bound state will arise between the dark atom and the nucleus of the heavy element.
When solving the one-dimensional Schrodinger equation (SE) for a helium nucleus in the
OHe–nucleus system (see Formula (
79)), it is necessary to set the interval of the helium radius vector
at a fixed position of the nucleus
. Therefore,
is a free parameter, and the shape of the total potential in which the helium nucleus is located and in which the corresponding SE is solved at a fixed position of the nucleus of the heavy element depends on it. Since we need to solve the set of SE for each position of the nucleus of a substance gradually approaching the dark atom, it is necessary to set the interval in which the radius vector of the nucleus
changes. If the interval
is set such that it completely overlaps with the interval
, the most probable position of helium when solving the SE will always be in the deep potential well created by the heavy nucleus. Since the initial position of the helium nucleus is known, it is located in a dark atom. Since the
OHe atom is a bound quantum mechanical system even before the start of its interaction with the nucleus of matter, it is necessary to set such intervals of variation in
and
so that their boundary points are close but do not overlap. This is necessary so that helium ends up in the dark atom and gradually begins to “feel” the approaching nucleus of the heavy element and, when its position is close, begins to tunnel into the nucleus through the Coulomb barrier with increasing probability. Therefore, for a given interval
, the right and left ends of which are equal in magnitude and opposite in sign, the interval
is specified such that its initial position is as far as possible from the dark atom, and the final position is close to the right end of the helium radius vector interval. The dark matter atom will experience greater polarization the closer it gets to the outer nucleus.
As the nucleus of the substance approaches, the ground state of the helium nucleus in O-helium will also change. To calculate the change in the dipole moment of a polarized dark atom, we need to know the change in the ground state of a polarized dark matter atom and the wave functions corresponding to these states. By gradually bringing the outer nucleus closer to OHe and solving the Schrodinger equation for helium for each corresponding fixed radius vector of the nucleus , we calculated the entire energy spectrum of helium in a polarized dark atom. We have always considered the nucleus as the outer nucleus.
Figure 14 plots the dependence of the energy value of the ground state of helium in a polarized dark atom as a function of the radius vector of the outer nucleus of sodium at an interval of a helium radius vector equal to
.
In
Figure 14, the red stars show the energy values of the ground state of helium in the polarized
OHe dark atom, corresponding to a fixed value of the radius vector of the sodium nucleus
. From
Figure 14, it is clear that when the nucleus of matter is far from
OHe, the dark matter atom can be considered isolated and the energy of the ground state of
in the dark atom approaches the value
, which corresponds to the binding energy of the
O-helium atom. However, the closer the sodium nucleus comes to the
O-helium, the more the
OHe atom is polarized and the more the energy of the helium ground state is distorted, tending to values above zero. Further, when the sodium nucleus comes too close to the dark atom, helium begins to tunnel into the sodium nucleus with a high probability and the energy levels tend to the most probable value corresponding to the square of the modulus of the wave function with the highest probability of finding helium at the center of the sodium nucleus.
Therefore, having solved the set of Schrodinger equations for helium in the OHe– system for various fixed positions of the nucleus of the heavy element relative to the dark atom, we obtained a spectrum of energy values for the ground state of helium in a polarized OHe atom and the wave functions corresponding to these states of helium.
Further, using the normalized wave function of the ground state of helium in an unpolarized dark atom,
, restored by solving the Schrodinger equation for helium in an isolated
OHe atom and the normalized wave functions of helium in a polarized dark atom, corresponding to different values of the ground energy state,
, we calculated the spectrum of values of the dipole moment
of polarized
OHe. The value of the dipole moment
corresponding to a certain
is calculated using the following formula:
In order to calculate the integral (
81), it is necessary to find its limits of integration. Since we are calculating the dipole moments of a polarized dark atom, we need to use the probabilities of finding helium in the region inside the dark atom. In order to determine the left and right boundaries of integration, it is necessary to find the intersection points of the graph of the squared modulus of the helium wave function and the graph of the total potential of helium in the
OHe–
system at a fixed value of
. That is, for each fixed position of the nucleus of a heavy element, it is necessary to determine the region of integration inside the dark atom or, in other words, the boundaries of integration, which are the points of intersection of the graphs of the total potential of helium and its squared modulus of the wave function corresponding to a certain value of the ground state of energy.
Figure 15 shows one example of determining the boundary of integration for calculating the integral (
81). The blue solid line shows the total potential of helium in the
OHe–
system for a fixed position of sodium
, the red solid line shows the graph of the squared modulus of the wave function of the ground state of helium in polarized dark atom with fixed
, black circles show the points of intersection of two graphs. The first two points of intersection of the graphs from left to right are taken as the integration boundary for (
81). The case depicted in
Figure 15 shows the state when the dark atom is negatively polarized since the probability of finding helium to the left of the origin or of the
particle is greater than to the right. The sodium nucleus has already come close enough for the nuclear potential to begin to be “perceptible” (a potential well of the heavy nucleus begins to appear to the right of the Coulomb barrier), but not enough for effective penetration of helium through the potential barrier to begin.
After calculating the spectrum of values of the dipole moment
of polarized
OHe, corresponding to different positions of the nucleus of the sodium
, it is possible to plot the dependence of the dipole moment of a polarized dark atom on the radius vector of the sodium nucleus
(see
Figure 16).
In
Figure 16, the red stars show the values of the dipole moments of the polarized
OHe atom, corresponding to fixed values of the radius vector of the sodium nucleus
for the helium radius vector interval
. From
Figure 16, it is clear that when the nucleus of a heavy element is far from
OHe, the dark matter atom can be considered isolated and the value of the dipole moment tends to zero. The closer the sodium nucleus comes to the
O-helium, the more strongly the
OHe atom is polarized and the more the dipole moment increases in magnitude, becoming more negative. Sodium increasingly repels helium due to the Coulomb force, and therefore, it is more likely to take a position more to the left of the
particle. After the sodium nucleus approaches sufficiently close to the dark atom and the value of
becomes close to the right boundary point of the helium radius vector interval
, the nuclear force between helium and sodium begins to dominate over their electrical Coulomb interaction, so
begins to tend to zero.
At some point, a sufficiently high probability of helium tunneling into the nucleus of the heavy element appears, and the dipole moment changes sign and becomes positive (see
Figure 17). At the same time, up to a certain point, the probability of finding helium inside the dark atom remains non-zero, which means that the
O-helium atom has not yet collapsed, and the dark atom has changed polarization, that is, the helium has taken position between the particle
and the nucleus of matter. Therefore, the dipole Coulomb repulsion of helium and the sodium nucleus becomes possible due to the dipole interaction between
OHe and the nucleus of the heavy element, due to which a low-energy bound state of the
OHe-
system can be formed.
The change in the sign of the dipole moment is consistent with the theory since, when the heavy nucleus is far from the dark atom, helium is repelled from it more strongly than it is attracted because the Coulomb interaction is stronger than the nuclear interaction at such distances, and the
particle, on the contrary, is attracted and becomes closer to the sodium nucleus due to the Coulomb force. However, when the sodium nucleus comes close enough to
OHe, the nuclear interaction begins to dominate, and it is assumed that helium should take a position between the
particle and the sodium nucleus, which manifests itself in a change in the sign of the dipole moment. However, due to the dipole Coulomb barrier, helium must again be repelled from the sodium nucleus, which should prevent the destruction of the dark atom. As we further decrease
, that is, as sodium approaches the dark atom, the positive value of the dipole moment begins to decrease and tends to zero (see
Figure 17). This occurs due to the increasingly deeper penetration of helium into the sodium nucleus and an increase in the probability of tunneling, while the probability of finding helium inside the dark atom tends to zero and the values of the dipole moment also become zero.
Figure 18 shows the first few graphs of the squared modulus of wave functions (red solid line) of the energy values of the ground state of helium in the total potential of the
OHe–
system (blue solid line) corresponding to certain positions of the sodium nucleus relative to the dark atom at the moment when repolarization of the dark atom begins to occur, that is, when the dipole moment from the maximum negative value begins to tend toward a value above zero and some probability of helium tunneling into the sodium nucleus through the Coulomb barrier appears. At the end of repolarization, the dipole moment changes sign and becomes positive. This process is shown in the corresponding graphs of the dependence of the dipole moment on the radius vector of the sodium nucleus presented in
Figure 16 and
Figure 17.
Figure 19 shows several graphs of the squared modulus of wave functions (red solid line) of the energy values of the ground state of helium in the total potential of the
OHe–
system (blue solid line) corresponding to certain positions of the sodium nucleus relative to the dark atom at the moments when helium begins to tunnel with a very high probability from the repolarized dark atom into the sodium nucleus, that is, when the dipole moment from the maximum positive value begins to tend to zero and the probability of finding helium in a dark atom also becomes practically zero. This can be seen in the graph of the dependence of the dipole moment on the radius vector of the sodium nucleus shown in
Figure 17.
Using the values of the dipole moment calculated quantum mechanically, we can restore the shape of the Stark potential (see Formula (
62)), which characterizes the electrical interaction of a polarized dark atom with the nucleus of matter. In order to restore the total effective interaction potential in the
OHe–
system, it is also necessary to restore the form of the nuclear interaction potential of the Woods–Saxon type between helium and sodium nuclei, and the form of the electrical interaction potential of an unpolarized
OHe dark atom with a sodium nucleus
, obtained by solving the self-consistent Poisson equation, taking into account the effect of screening the
nucleus by the
particle, which manifests itself only at close distances from dark atom, since it decays exponentially (see Section 5.1—Approach of Reconstructing of Interaction Potentials in the
XHe–nucleus system in [
63]). As a result, summing up all the listed potentials, the form of the effective potential of the interaction of the
OHe dark atom with the sodium nucleus has been restored (see
Figure 20).
The total effective potential of the interaction of
O-helium with the nucleus of the sodium, depicted by the red dotted line in
Figure 20, can be interpreted as the potential in which the sodium nucleus is located in the
OHe–
system. On the chosen scale, the nuclear potential of the Woods–Saxon type (green dotted line) and
(blue dotted line) practically does not differ from zero, and the potential well in the total effective interaction potential is completely determined by the Stark potential (gray dotted line) and thus the negative values of the dipole moment of polarized
OHe. However, this potential well is quite deep, about
, so the bound state of
with a dark atom in this potential corresponding to certain manually specified intervals
and
will also be high-energy, which is very different from the result of the
experiment. It is also possible to depict in more detail the effective total potential of interaction of
O-helium with a sodium nucleus near the region corresponding to the moment of repolarization of the dark atom, that is, the moment when the dipole moment takes positive values (see
Figure 21).
From
Figure 21, it is clear that the theoretically assumed presence of a positive dipole Coulomb barrier in the total effective interaction potential for the sodium nucleus in the
OHe–
system depends on whether the positive potential barrier in the Stark potential (gray dotted line), determined by the positive values of the dipole moment of the repolarized dark atom, “overcome” negative values of the nuclear interaction potential (green dotted line) and the electrical interaction potential of the unpolarized
OHe dark atom with a sodium nucleus
(blue dotted line).
According to
Figure 21, when the distance between helium and the sodium nucleus is about
, the maximum positive value of the Stark potential turns out to be less than the negative value of the sum of the nuclear potential and the potential
, which leads to negative values of the total effective interaction potential. However, since the interval of the radius vector of the helium nucleus
, in which the Schrodinger equation for helium in the
OHe–
system is solved at a fixed position of the nucleus of the heavy element
, is a free parameter and is set manually, we can increase the
interval and, by appropriately changing the
interval, make the helium in the dark atom begin to “feel” the influence of the sodium nucleus at greater distances than has been done so far, since the final position of the sodium nucleus
is given close to the right boundary of the helium radius vector interval
. This will lead to the fact that the maximum negative value of the dipole moment of the polarized dark atom will decrease since it is largely determined by the Coulomb interaction between the helium and sodium nuclei, which decreases with increasing distance between the nuclei on scales larger than the radius of the sodium nucleus. Consequently, the maximum negative value of the Stark potential, which determines the depth of the potential well in the total effective interaction potential of the
OHe–
system, will also decrease. In addition, an increase in the
interval and the corresponding change in the
interval, in turn, will also affect the width of the Coulomb barrier in the total potential for helium in the
OHe–
system. It will become much wider, which will ultimately affect the wave functions of helium and reduce the probability of its tunneling into the nucleus of a heavy element. Consequently, this should also lead to a decrease in the positive values of the dipole moment of the repolarized dark atom and, therefore, a decrease in the positive potential barrier in the Stark potential. However, at the same time, due to an increase in the distance between interacting nuclei, the values of the nuclear potential and the
potential will also decrease, which can lead to the expected positive values of the potential barrier in the total effective interaction potential for sodium in
OHe–
system.
In the OHe hypothesis, it is expected that the magnitude of the dipole Coulomb barrier in the total effective interaction potential of the OHe– system will make it possible to avoid the direct fusion of the sodium nucleus with the dark atom. The relative velocity of the sodium nucleus in the OHe– system, under the conditions of the experiment, is thermal and approximately corresponds to the values of normal room temperature (∼), that is, the sodium nucleus in the OHe– system will move with kinetic energy approximately equal to ∼. Therefore, it is expected that the height of the dipole Coulomb barrier in the total effective interaction potential of the OHe– system will be greater than the kinetic energy of sodium.
Thus, increasing the interval of the helium radius vector from
up to
and taking the interval
, we solved the one-dimensional Schrodinger equations for helium in the
OHe–
system for each fixed value of
, we also calculated the dipole moment values for each value of the energy of the ground state of helium in a polarized dark atom and restored the shape of the total effective potential of interaction between
OHe and the sodium nucleus (see
Figure 22 and
Figure 23).
From
Figure 22, it follows that the depth of the potential well in the total effective potential of the interaction of the dark atom with the nucleus of the sodium (red dotted line), as expected, has decreased. Comparing
Figure 22 with
Figure 20 one can see that the depth of the potential well after increasing the interval
and increasing the values of the position of the sodium nucleus relative to the dark atom
, decreased from ∼
to ∼
.
In
Figure 23, one can see that at distances between the helium nucleus and the sodium nucleus corresponding to approximately ∼
, the nuclear potential of the Woods–Saxon type (green dotted line) and the potential of the electrical interaction of unpolarized
OHe dark atom with the sodium nucleus
(blue dotted line) are practically equal to zero, and as expected, a positive potential barrier appears in the total effective interaction potential of the
OHe–
system, which is completely determined by the Stark potential. At the same time, from a comparison of
Figure 21 with
Figure 23, it is clear that, as expected, after increasing the interval
and increasing the values of the position of the sodium nucleus relative to the dark atom
, the positive potential barrier in the Stark potential decreased from ∼
to ∼
due to a decrease in the magnitude of the positive values of the dipole moment of the repolarized dark atom.
Thus, the dipole Coulomb barrier in the total effective interaction potential of the
OHe–
system in
Figure 23 becomes less than the kinetic energy with which the sodium nucleus in the
OHe–
system should move towards the dark atom under the conditions of the
experiment (∼
) approximately 10 times. However, the depth of the potential well in the total effective potential of the interaction of a dark atom with the nucleus of the sodium is approximately six times greater than the values obtained in the
experiment (
) and even more than the expected theoretical energy values of the low-energy bound state of sodium with a dark atom (∼
). Therefore, a further increase in the interval of the helium radius vector
, within which the Schrodinger equation for helium in the
OHe–
system is solved and the values of the position of the sodium nucleus are relative to the dark atom
, will reduce the depth of the potential well in the total effective interaction potential for sodium in the
OHe–
system, and will also further reduce the height of the dipole Coulomb barrier, which is already less than the expected values. Consequently, it is necessary to improve the accuracy of our numerical model, for which we need to take into account additional, previously unaccounted-for effects that characterize the interaction of the dark atom with the nucleus of matter. Such an effect, for example, is the centrifugal potential of interaction between the dark atom and the nucleus of the sodium
.
4.3.4. Adding Centrifugal Potential to the Quantum Mechanical Numerical Model of the OHe–Nucleus System
The centrifugal potential of the interaction of the
OHe dark atom with the nucleus of the sodium
, which depends on the total angular momentum of the system of interacting particles,
, and on the distance between interacting particles,
R, without taking into account the moments of inertia of nuclei, is determined as follows (see Formula (27) of article [
73]):
where
is the reduced particle mass.
Since the mass of OHe is completely determined by the mass of the heavy particle , which we took as equal to , and the mass of the sodium nucleus, approximately equal to , which is much less than the mass of OHe, the reduced mass is approximately equal to the mass of sodium .
The total angular momentum of interacting particles
can be calculated as follows:
where
is the orbital angular momentum of the interacting particles depending on the impact parameter
,
is the intrinsic angular momentum of the sodium nucleus, and
is the spin of the
O-helium dark atom.
is equal to the sum of the
particle spin,
, and the intrinsic angular momentum of the helium nucleus,
:
We consider the case of a head-on collision between a sodium nucleus and OHe. When the impact parameter of the sodium nucleus swooping on the dark atom is zero, , the orbital momentum of the interacting particles is also zero . The intrinsic angular momentum of the sodium nucleus is equal to .
The spin of the
OHe dark atom is determined by the spin of the
particle since the intrinsic angular momentum of the helium nucleus is equal to
. The spin of the
particle,
, is a model-dependent parameter since it depends on the structure of the
particle. In models with four or five generations of fermions, the existence of a stable state with a charge of
,
, consisting of three anti-quarks, for example, fourth generation
:
[
74]. Thus, if
is
and consists of quarks of new families, then
. The walking technicolor (WTC) model suggests the existence of a new type of interaction within the framework of SU(2) symmetry, which binds a new type of quark [
8,
13]. Technibaryons are considered within the framework of the technicolor model. Technibaryons are particles formed from techniquarks that have their own type of interaction (not manifested explicitly at energies below the technicolor confinement scale) and charge. If the
particle is technibaryon, then
or
. The WTC also introduces the existence of the fourth generation of technileptons. If the
particle is technilepton, then
.
Thus, in the case we are considering, when the impact parameter
, the total angular momentum of the interacting
O-helium dark atom and sodium nucleus,
, is calculated as follows:
Before adding the centrifugal potential
to the total effective potential of interaction between
OHe and the nucleus of the sodium in the
OHe–
system, it is also necessary to take into account the centrifugal potential of the interaction between the helium nucleus and the sodium nucleus
when solving the one-dimensional Schrodinger equation for
in the
OHe–
system. That is, it is necessary to add
to the total potential in which the helium nucleus is located in the
OHe–
system (see Formula (
80)) for a fixed position of the nucleus of a heavy element
:
where
is calculated using the following formula:
where
is the total angular momentum of the interacting helium and sodium nuclei.
is equal to the intrinsic angular momentum of the sodium nucleus , since the intrinsic angular momentum of the helium nucleus , and we consider the case of a zero impact parameter of a sodium nucleus incident on helium; therefore, the orbital momentum of the interacting helium and sodium nuclei is also zero. Thus, .
Figure 24 shows an example of the total interaction potential of helium in the
OHe–
system, taking into account the centrifugal potential of interaction between the helium nucleus and the sodium nucleus,
, depending on the radius vector of the helium
at a fixed value of the radius vector
of the outer nucleus of
.
Figure 24 shows the potentials of the Coulomb interaction and the nuclear interaction between helium and the nucleus of the heavy element and also shows the centrifugal potential of the interaction between the helium nucleus and the sodium nucleus at zero impact parameter
; in addition, the Coulomb potential between helium and the
particle and the total interaction potential for the helium nucleus in the
OHe–
system are shown.
As a result, having solved the one-dimensional Schrodinger equations for helium in the
potential of the
OHe–
system for various fixed positions of the sodium nucleus
, taking the interval
with the helium radius vector interval equal to
, we have obtained the energy spectrum of the ground state of helium in the polarized
OHe atom and the wave functions corresponding to these helium states. Then we calculated the values of dipole moments for each value of the energy of the ground state of helium in a polarized dark atom. As a result, the form of the total effective interaction potential of
OHe with the sodium nucleus in the
OHe–
system was restored, taking into account the centrifugal interaction potential
for two values of the total angular momentum of interacting
O-helium and sodium nucleus particles,
, at
and
, that is, for
and
, respectively (see
Figure 25 and
Figure 26).
From
Figure 25 and
Figure 26, it is clear that the greater the value of the spin
and the total angular momentum of the interacting dark atom and sodium nucleus particles
, the more the centrifugal interaction potential
affects the total effective potential of interaction of
OHe with the sodium nucleus, reducing the depth of the potential well, increasing the positive potential barrier, and preventing the free fusion of the substance nucleus with the dark atom and its destruction.
Since we are considering the three-body problem, we should take into account feedback between interacting particles, that is, the reverse impact of the results of interaction on its further course. Therefore, at the beginning, we consider the helium nucleus in the
OHe–
system and describe the forces acting on helium, that is, we restore the total potential for helium in the
OHe–
system and solve the Schrödinger equation for it in order to calculate the values of the dipole moment of the polarized dark atom for each fixed position of the sodium nucleus
. Thus, the influence of the sodium nucleus on the polarization of the dark atom, characterized by the magnitude of the dipole moment, is taken into account. Therefore, we, among other things, took into account the centrifugal interaction potential between the helium nucleus and the sodium nucleus
, which affects the shape of the total interaction potential of helium in the
OHe–
system,
, and through the influence on
influences the values of the dipole moment. This can be seen, for example, from
Figure 26, which, when comparing with
Figure 22, one can notice that the depth of the potential well in the Stark potential, which in
Figure 22 practically coincides with the total effective potential of interaction between
OHe and the sodium nucleus, increased in
Figure 26 after adding
to the Schrödinger equation. This means that the
potential influenced the negative values of the dipole moment of the polarized dark atom. Also, the addition of
to the total helium interaction potential
affected the height of the dipole Coulomb barrier in the Stark potential, slightly reducing it, since
increases the positive potential barrier in
and reduces the probability of helium tunneling into the nucleus of the heavy element. Thus, the influence of the sodium nucleus on the polarization of
OHe is first taken into account, after which the already polarized dark atom influences the sodium nucleus, interacting with it as a dipole. This interaction is characterized by the Stark potential. In addition, sodium interacts with the dark atom as a whole also through the centrifugal interaction potential
, through the nuclear potential and
, which practically do not appear on large-distance scales between interacting particles.
As a result, we obtain the total effective potential of the interaction between
OHe and the nucleus of the sodium in the
OHe–
system, shown, for example, in
Figure 26. Its shape depends on the spin value of the
particle,
, but in any case, the shape of the total effective potential of the interaction of sodium with
OHe qualitatively coincides with the theoretically expected one. This makes it possible to increase the interval of the helium radius vector
to obtain, corresponding to the experimental and theoretical expectations, a value of the potential well depth of about ∼
and a positive potential barrier with a height greater than zero and greater than the thermal kinetic energy of sodium ∼
. This value of the positive potential barrier will prevent the fusion of
and/or
with the nucleus of matter and the destruction of the dark atom, which is a very important condition for the continued existence of the
OHe dark atom hypothesis.