1. Introduction
Plants take up nitrogen in the forms of NO
3−, NH
4+, amino acids, and peptides. Nitrogen, taken up as NO
3− or NH
4+, is assimilated into amino acids via the Glutamine Synthetase/Glutamate Synthase pathway and moves from the source to sink tissues in the form of amino acids [
1,
2]. Thus, the functional characterization of plant amino acid transporters is important to elucidate plants’ ability to take up organic nitrogen from the soil and to understand the translocation and distribution of nitrogen within plants. Amino acids travel from the source to sink tissues through various membranes (plasma, chloroplast, mitochondria, tonoplast, and peroxisome) via facilitated or active transport by amino acid transporters. Plants with various types of source and sink tissues, as well as with various types of protein and non-protein amino acids, require a large number of amino acid transporters with export, import, antiport, or facilitator capacity. These transporters, as they facilitate the movement of amino acids through membranes, also regulate the distribution of amino-N in plants. Understanding the distribution of amino-N in plants thus requires understanding the tissue-specific distribution of amino acid transporters with their substrate affinity and transport mechanism.
While a large number of the annotated amino acid transporters in plants remain to be characterized, many of the characterized amino acid transporters were studied in heterologous unicellular systems such as mutant strains of
Saccharomyces cerevisiae or oocytes of
Xenopus laevis [
3] (pp. 212–215). These relatively simple systems facilitate studying transporters for their transport mechanisms and substrate affinities under a controlled environment. However, the content and composition of amino acids in and out of a plant cell in a physiological environment is dynamic and differ from the experimental conditions provided in the heterologous uptake studies. Some amino acid transporters, such as the human LATs, require additional components for the tertiary folding and localization, and binding partners for the transport activity, which may not be available in a heterologous system [
4,
5,
6]. Thus, in planta characterization of amino acid transporters is a preferential choice for understanding their biological importance. However, in the presence of over 60 amino acid transporters in Arabidopsis with possible redundant functions, it can be challenging to pinpoint the role of an amino acid transporter through single knockout mutant analysis [
7]. This research investigated the role of the Arabidopsis L-type Amino acid Transporter-5 (LAT5; At3G19553) in physiological conditions and interpreted the findings with caution, keeping the shortcomings in consideration.
The Arabidopsis LAT family (LAT1-5), within the Amino acid Polyamine Choline superfamily, was initially classified based on a phylogenetic analysis that found their sequence similarity with the light chain subunits of the human L-type amino acid transport system [
8]. Subsequently, the Arabidopsis LATs were re-classified as members of the proton–polyamine symporter (PHS) family [
9]. The LATs in human function as heteromeric exchangers of large neutral amino acids at 1:1 stoichiometry [
4,
5,
6,
10]. However, the Arabidopsis LATs have been demonstrated to have roles in mediating the transport of a range of substrates including amino acid, polyamine, paraquat, and thiamine [
11,
12,
13,
14,
15,
16,
17]. The LAT5 was previously studied for its role in developmental responses, such as flowering and senescence, where it was called PUT5 under the assumption that it is a polyamine uptake transporter [
18]. While studies have yet to demonstrate its role in polyamine transport, one report mentioned that PUT5, when expressed in a mutant yeast strain deficient in spermidine transport, increased the sensitivity of the yeast cells to exogenous polyamines and paraquat, suggesting that PUT5 mediates polyamine transport [
17]. In this report, we explored the organ and tissue-specific expression of the LAT5, studied its role in large neutral amino acid (leucine) transport in the native physiological environment, and termed it as LAT5/PUT5.
3. Discussion
According to the in silico analysis, the LAT5/PUT5 is an integral membrane protein that has amino acid transporter and antiporter domains conserved in the sequence (
Figure 1a,b) [
11]. In human, the LATs conserve a cysteine residue in the second extra-cellular loop through which they form cys-cys di-sulfide bond with a glycoprotein subunit to function as exchangers [
4,
5,
6,
21]. The conserved cysteine residue in the LAT5/PUT5 (
Table S1) did not position in any of the predicted intra- or extra-cellular loops (
Figure 2b). However, the predicted Pox_P21 domain, conserved near the c-terminus in the LAT5/PUT5 (
Figure 2b), is a characteristic domain in the Poxvirus P21 membrane protein that is localized in the inner membrane of the intra-cellular mature virus and acts as a membrane anchor for the externally located fusion protein [
22]. This suggests that the LAT5/PUT5 may also have a binding partner. Further exploration of possible protein interactions within the Arabidopsis genome identified several proteins to have functional or physical associations with the LAT5/PUT5 protein (
Figure 1c) [
19,
20]. These proteins may or may not have common functions, but these findings corroborate the possibility that the LAT5/PUT5 has binding partner(s). The LAT5/PUT5 was found to be localized to the endoplasmic reticulum (
Figure S2) [
18]. However, if the LAT5/PUT5, as suggested by the in silico analysis, binds with a partner through the conserved cysteine residue or the Pox_P21 domain at the c-terminus before tertiary folding and localization, having an epitope at this end may have hindered this protein to localize properly in these studies. We have interpreted the possible role of this transporter with caution, keeping in consideration that depending on the localization of the LAT5/PUT5 to the plasma membrane or organellar membrane, the deduced function of this transporter may vary. Previous studies implied that the LAT5/PUT5 mediates polyamine transport, but none of these reports demonstrated this with supporting data [
17,
18]. In this report, we studied the role of the LAT5/PUT5 in amino acid transport in the native physiological conditions.
The expression analysis suggests that LAT5/PUT5 is a widely expressed transporter (
Figure 2). The mutant
lat5-1 showed reduced shoot growth on fertilized soil characterized by the smaller size of rosette leaves, reduced leaf biomass, and the smaller size of leaf protoplasts (
Figure 3a–e). The growth reduction produced by the
lat5-1 mutant in the presence of both organic and inorganic nitrogen in soil could be due either to a reduced acquisition of amino-N from the soil, or a defect in internal nitrogen distribution, or a cumulative effect of both. The
lat5-1 seedlings were hypersensitive to the presence of leucine in the growth medium (
Figure 3f,g). Analyzing the free amino acid pool in these seedlings showed that both the WT and
lat5-1 seedlings accumulated drastically higher concentration of leucine in the free amino acid pool which was correlated with the concentration of leucine in the growth medium, suggesting that the excessive leucine in the free amino acid pool in these seedlings were taken up from the growth medium (
Table 1). This study suggested that the mutant
lat5-1 seedlings were not defective in taking up exogenous leucine. While the surplus leucine caused toxicity in both the
lat5-1 and WT seedlings, the
lat5-1 seedlings were presumably defective in mobilizing the excessive leucine and therefore exhibited hypersensitivity compared to the WT. In a radio-labelled leucine uptake study, the mutant
lat5-1 took up less leucine under normal conditions but accumulated more leucine when the plants were subject to an extended dark period (
Figure 4a–c). These studies suggest that an altered physiological condition triggered by the prolonged dark period had a reverse impact on the role of LAT5/PUT5 in mediating leucine transport in these seedlings. These findings, along with the in silico prediction of antiporter domain in the LAT5/PUT5 protein (
Figure 1a–c), and a strong indication that this transporter also plays a role in polyamine transport, indicate a transport activity of the LAT5/PUT5 different from a uniporter or symporter.
A transporter located in the phloem and mediates both amino acid and polyamine transport, as the LAT5/PUT5 appears to be, is likely involved in phloem loading and unloading of amino acids and polyamines and therefore should play an important role in both amino acids and polyamine distribution among the sources and sink tissues. However, in this report, we focused on its role in amino acid transport. The transport of amino acids from leaves to seeds occurs via the phloem. Loading amino acids from leaf mesophyll cells into the phloem minor vein may occur both symplastically and apoplastically. In many species including Arabidopsis, loading assimilates into the phloem occurs apoplastically, where amino acids are exported from mesophyll cells into the apoplasm, followed by active uptake into the sieve element-companion cell complex of the phloem [
23]. Based on the expression analysis, the LAT5/PUT5 showed relatively higher abundance in the leaves and specific expression in the leaf mesophyll cells and phloem minor veins (
Figure 2a–d), which suggests a role for this transporter in loading amino acids from the leaf mesophyll cells into the phloem. Amino acids, loaded into the phloem from source tissues in the leaf may undergo exchange between the phloem and xylem for upward translocation to the reproductive sink tissues [
24]. The expression of the LAT5/PUT5 in the stem along the vascular transport strand (
Figure 2f,g) indicates its involvement in an active exchange of amino acids between xylem and phloem. In the siliques, expression of the LAT5/PUT5 in the replum and in the secondary vasculature in the carpel (
Figure 2h–j) suggests an important role for this transporter in translocating amino acids to/from the seeds. Based on a free amino acid analysis in the leaves, stems, and siliques, the
lat5-1 showed significantly increased concentration of specific amino acids including asparagine and glutamine—the two major nitrogen-carrier amino acids—in the siliques, compared to the WT (
Figure 5a). Analysis of seed weight and nitrogen content showed increased seed weight and nitrogen content in the
lat5-1 compared to the WT (
Figure 5b,c). The Arabidopsis Amino Acid Permease 2 (AAP2) showed a similar expression pattern in the stem and silique [
25]. While the AAP2 knockout mutant showed a decrease in the leaf amino acid content, it also showed a decrease in the total seed nitrogen content [
26]. This might be due to the transport mechanism of the AAP2 being different from the LAT5/PUT5. While the AAP2 is an H
+-amino acid symporter [
25,
26], our studies indicated a transport activity of the LAT5/PUT5 that is unlike a symporter.
4. Materials and Methods
4.1. In Silico Analysis of the LAT5/PUT5 Protein Sequence
4.2. Isolation of Lat5-1 Knockout Mutant
The Columbia-0 ecotype of
Arabidopsis thaliana was used in this research. A homozygous T-DNA insertion line (Salk_007135c) lacking transcripts of the LAT5/PUT5 was obtained from the SALK collections at the Arabidopsis Biological Resource Centre (Columbus, OH, US) [
28]. After confirming the presence of T-DNA in the second exon and absence of functional transcripts (
Figure S1a,b), this line was named
lat5-1 and used as a LAT5/PUT5 knockout mutant in the subsequent studies. A previous report also confirmed that this line lacked the LAT5/PUT5 transcripts and called it put5 [
18].
The presence of the T-DNA in the LAT5/PUT5 (At3g19553) locus was primarily confirmed through a three-primer PCR screening scheme described in the Salk webpage (
http://signal.salk.edu/). One primer specific to the left border sequence of T-DNA, LBb1 (5′-GCGTGGACCGCTTGCTGCAACT-3′), and two primers specific to the LAT5/PUT5 sequence (reverse primer 5′-TGACTCAGGTACAAACCCTCC-3′ and forward primer 5′-ATATTTGATTCCCCTCATGGC-3′) were used in the PCR screen. The position of the T-DNA in the second exon of LAT5/PUT5 was confirmed through aligning the sequence produced using the T-DNA left-border-specific primer. Reverse Transcriptase (RT)-PCR, using UTR-specific primers, confirmed the absence of functional size of LAT5/PUT5 transcripts in
lat5-1 (
Figure S1b). For RT–PCR, total RNA was extracted, using the RNeasy Plant Mini Kit (QIAGEN, Darmstadt, Germany), from 100 mg of flash-frozen leaf tissues as per manufacturer’s instruction. To remove contaminating DNA, RNA was treated using Ambion’s DNA-free kit. The quantity and quality of RNA were checked by using Nanodrop (ThermoFisher, Waltham, MA, USA) and Bioanalyzer (Agilent 2100 Bioanalyzer, Agilent Technologies, Inc., Santa Clara, CA, USA). A one-step RT–PCR using both the LAT5/PUT5 and Actin2 specific primers in the same reaction vial was performed using SuperScript III One-Step RT–PCR System with Platinum Taq High Fidelity (Catalog No. 12574-030, Invitrogen, Carlsbad, CA, USA). Actin2 was used as a technical control and WT plant tissues were used as a positive control. The reactions were set up as per manufacturer’s instruction and the program for the thermal cycler was as follows: cDNA synthesis at 55 °C for 30 min, pre-denature at 94 °C for 2 min, 40 cycles of denature at 94 °C for 15 s, annealing at 55 °C for 30 s, extension at 68 °C for 1 min, final extension at 68 °C for 5 min.
4.3. Plant Growth and Data Analysis
All plants (unless otherwise mentioned) were grown on well-aerated fertilized soil in a growth chamber under a 16 h light–8 h dark regime under ~170 µE·m
−2·s
−1 light intensity at 23 °C daytime temperature. Growth condition and soil type were the same as described in Begam and Good, (2017) [
11]. For phenotypic screening in the presence of leucine, nitrogen-free half-strength MS medium [
28] was prepared using stock solutions of macronutrients, micronutrients, and vitamin mixture at a molar concentration described in the commercially available MS basal salt mixture (Catalog No. ICN2623120; Fisher Scientific, ON, Canada) without ammonium nitrate. To obtain the desired nitrogen concentration (1 mmol·L
−1 nitrate and 1 mmol·L
−1 or 2 mmol·L
−1 leucine,
Figure 3f), potassium nitrate and L-leucine (Sigma–Aldrich, Oakville, ON, Canada) were added to the MS-agar medium. For each growth condition, both genotypes were grown on the same plate with 3–5 plate replications. Sterile seeds were plated on MS agar medium and stratified by storing the plates at 4 °C temperature for three days and grown under 16 h light–8 h dark regime at 23 °C daytime temperature.
Data analysis and significance tests for all studies were carried out using PRISMv.5. A two-way T-test was performed for the statistical significance.
4.4. Expression Analysis
For the organ-specific quantitative RT-PCR, RNA was extracted from roots, stems, rosette leaves, cauline leaves, senescing leaves, flowers, siliques, and whole plant tissues separately. Total RNA was extracted, using the RNeasy Plant Mini Kit (Qiagen, Darmstadt, Germany) as described above, from approximately 100 mg (fresh weight) of flash-frozen tissues of each organ. All samples were adjusted to a final concentration of 50 ng·µL−1. For each sample, 2.5 µg of total RNA was used in the cDNA synthesis with oligo-dT and random primers (Invitrogen). The SuperScript II Reverse Transcriptase (Invitrogen, Carlsbad, CA, USA) was used in the reverse transcription for 50 min at 42 °C. The TaqMan Gene Expression Assay (assay ID: At02254880_gI for LAT5/PUT5; assay ID: At02335270_gH for Actin2) was used in PCR amplification. Actin2 was used as an endogenous control. The PCR program was as follows: 95 °C for 10 min followed by 40 cycles of 95 °C for 15 s and 60 °C for one minute. The relative quantitation was calculated using a 7500 Fast System SDS software (Applied Biosystems, Waltham, MA, USA). For data analysis, the average expression level in the whole plant tissues was used as a calibrator. The final graph was produced using RQ (Relative Quantitation) as an expression level and the mean difference between RQmax and RQmin as an error bar.
For the tissue-specific expression analysis, the promoter region of the LAT5/PUT5 (1288 bp upstream from the start codon) was PCR amplified using SalI and NcoI sites added to the 5′-end of forward (5′-
GTCGACTGCGAGATATCGGACATCATA-3′) and reverse (5′-AA
CCATGGCTTAGAGCTGTTTTCATCG-3′) primers, respectively, and cloned into the pCAMBIA1305.1 vector (
http://www.cambia.org/) between the SalI and NcoI site, replacing the CaMV35S promoter preceding the GusPlus coding region. The final expression vector with the P
LAT5:GusPlus fusion was confirmed through PCR and restriction analysis. The transformation for producing a transgenic Arabidopsis line with P
LAT5:GusPlus was carried out using a modified floral dip transformation protocol described by Clough and Bent [
29]. The transformants were screened on a 0.5× MS medium containing 25 µg.mL
−1 hygromycin and confirmed by PCR using GUS specific primers. The GUS histochemical assay was performed using a modified protocol described by Weigel and Glazebrook [
30]. Samples were prepared by incubating three-week-old seedlings or mature plants in a GUS staining buffer (50 mM Na
2HPO
4, 2 mM Potassium ferricyanide, 2 mM Potassium ferrocyanide, 2 mM X-Gluc and 0.2% TritonX-100) for 30 min (seedlings) or six hours (mature plants) at 37 °C followed by 30 min of incubation in 70% ethanol at room temperature. Samples were fixed in FAA (50% ethanol, 10% Glacial acetic acid, 5% formaldehyde) overnight and stored in 70% ethanol at 4 °C until photographs were taken under a dissecting microscope. For the tissue-specific expression analysis, tissues were processed and embedded in wax. Thin cross-sections of 8 µm were produced using a microtome. Tissue sections were fixed on a glass slide by drying them at 39 °C for two days. Samples were de-waxed with toluene and counter-stained with safranin O prior to taking photographs under a light microscope.
4.5. In Planta Radio-Labelled Leucine Uptake Study
A 14C- and 3H-Leu uptake analysis was carried out using WT and homozygous lat5-1 seedlings of approximately one-month-old, grown on fertilized soil under normal growth conditions. For dark treatment, seedlings in pots were kept in the dark for 27 h prior to isotopic feeding. Seedlings were removed from the soil and roots were rinsed with sterile water before use. 14C-leucine and 3H-leucine were added to the uptake medium (liquid MS without nitrogen and sucrose, pH 5.4) with cold leucine added to a final concentration of 10 µM·L−1, and used 15 mL uptake medium per seedling. Seedlings were removed from the uptake medium after two hours, and roots were rinsed three times in sterile water for a total of 10 min. When export was allowed following uptake, roots were rinsed with sterile water for five minutes after removing from the uptake medium and dipped in the export medium for another two hours. Half-strength liquid MS without nitrogen and sucrose was used as an export medium. Uptake was carried out under ambient light but export was carried out in the dark. During uptake, export or rinsing, only roots were dipped in the solutions to avoid surface contamination of radioactivity in the shoots. Roots and shoots were separated immediately after rinsing and stored directly in glass scintillation vials. Tissues were dried at 70 °C overnight and weighed. Samples were digested overnight at room temperature with 1 mL of 5% NaClO. Vials were kept open for at least 1 h under a fume hood before adding 5 mL HionicFluor (Ultima Gold XR, Perkin Elmer Inc., Waltham, MA, USA) to each vial. Radioactivity in the roots and shoots of the same plant were combined to obtain total radioactivity in each sample. Data were presented as radioactivity in pmol per milligram dry weight of shoots.
4.6. Analysis of Free Amino Acids through HPLC
For the HLPC analysis of free amino acids in seedlings grown in the presence of variable concentrations of leucine (
Figure 3f and
Table 1), three-week-old seedlings were used for amino acid extraction. For free amino acid analysis in the leaves, stems, and siliques, tissues were collected from mature plants. Samples were grounded in liquid nitrogen. For dry weight, tissue samples were lyophilized for 72 h before weighing. One and a half mL extraction buffer (methanol: chloroform: water at 65:25:10 ratio with 20 nmol.mL
−1 internal standard (Norvaline and Sarcosine) was added to each sample. Samples were vortexed and centrifuged to separate the aqueous phase. Five hundred microliter of the supernatant was collected and 100 µL chloroform followed by 150 µL water was added to the supernatant. Samples were mixed and centrifuged. The upper aqueous phase (400 µL) was passed through a MILLEX GX 0.22 µm filter (UFC30GV0S) followed by a MILLIPORE BIOMAX 5KNMWL MEMBRANE filter (UFV5BCC00). The final filtrate was used in the HPLC analysis using a ZORBAX Rapid Resolution HT Eclipse Plus C18 1.8 µm 3.0 × 100 mm column. During extraction, the volume of reagents added and the volume of supernatant harvested were kept constant for all samples to maintain similar extraction efficiency across samples. An Agilent Technologies 1200 series automated liquid chromatography system was used to analyze the samples. Samples were derivatized pre-column with OPA (o-Phthalaldehyde) and FMOC (9-Fluorenylmethyl chloroformate). All chromatographs were processed in the Agilent Chemstation software suite. The area under each signal peak was calibrated by the standard calibration curve and normalized by the internal standard. All concentration data were back-calculated to the concentration in the samples in nmol per gram fresh weight or dry weight, as specified in
Table 1 and
Figure 5a. For each organ, the total amino acids in the WT was arbitrarily taken as 100%, and the %change in the
lat5-1 was calculated accordingly.
4.7. Analysis of Nitrogen Content in Mature Seeds
Mature and dry seeds harvested from soil-grown lat5-1 and WT plants were weighed using a Mettler Toledo XP56 Delta Range Microbalance that had accurate readability up to 10 µg. For the analysis of total nitrogen and carbon content, nine sample replications were prepared from three individual plants from each genotype with 100 seeds per replication. A CE440 Elemental Analyser (Exeter Analytical Inc., North Chelmsford, MA, USA) was used to analyze the carbon (CO2), hydrogen (H2O), and nitrogen (N) content in the organic and inorganic compounds. The combustion of weighed samples was carried out in pure oxygen under static conditions at 975 °C. Helium was used to carry the combustion products through the analytical system. The products of combustion were passed over suitable reagents in the combustion tube to assure complete oxidation. In the reduction tube, oxides of N were converted to molecular N at 690 °C, and the residual oxygen was removed. Samples were passed through a thermal conductivity detector. The percentage of carbon and nitrogen in each sample replication was calculated by dividing the total mass of N or C by the weight of 100 seeds.