1. Introduction
Lattice geometric properties of Banach function spaces and operators on them (including concepts such as
p-convexity and
p-concavity, as well as
p-regularity) serve as a rich source of results on the structure of such spaces and find numerous applications in functional analysis. These properties are usually given by vector norm inequalities, which always contain homogeneous transformations involving finite sets of functions in their expressions. Then, classical Krivine calculus allows the definition of certain homogeneous expressions that are given for finite sequences of real numbers as abstracts elements of Banach lattices, extending in this way geometric theory to the general case of Banach lattices (see [
1,
2]). In the case of spaces of (classes of
-a.e. equal) integrable functions, the pointwise definition plays the role of this abstract construction. The usual expressions that are normally taken into account are the ones associated with lattice geometric properties of Banach lattices (as
p-concave or
p-convex operators, which involve expressions as
) and also have direct relations with the summability properties of these operators (
p-summing and
-mixing operators, for example, see [
3,
4]). These expressions have in common that they are positively homogeneous. This fact allows the extension of some of the geometrical lattice properties of
-spaces to other spaces, with applications in different fields, such as in [
5], but hinders the analysis of other transformations that could also be of interest. Introducing non-homogeneous expressions would allow an analysis of other kinds of inequalities and properties, such as the summability of operators when the range of functions in their images is cut by a certain interval.
Thus, the aim of the present paper is to present new tools for the analysis of integral inequalities and lattice summability properties (equivalently, factorization theorems of operators through
-spaces) involving non-homogeneous (Lipschitz) maps on
We will focus our attention on operators that control the bounds of the functions in the range of operators preserving some geometric lattice properties, obtaining a general procedure that presents new integral domination formulas for classical Banach lattices. Nowadays, there is a growing interest in the summability of Lipschitz operators, as can be seen from the relevant number of publications on the subject in recent times [
6,
7,
8,
9,
10,
11,
12]. However, the present paper is not concerned with this problem, but, as we said, with the composition of functions with (scalar) Lipschitz maps to open up some well-known factorization theorems to the use of non-homogeneous expressions in the required geometric inequalities.
The paper is split into four sections. After this introductory section, in
Section 2, we show how the pointwise composition of functions with Lipschitz maps in
can be used to define new (pseudo)distances on function lattices, and we explain the relations with the original lattice norms on them.
Section 3 is devoted to showing the separation results that transform vector norm inequalities (that represent geometric lattice properties) into integral dominations of operators, involving, in our case, non-homogeneous expressions (and this is the main difference with the classical Maurey-type arguments [
13,
14] for factorization through
-spaces). All these results can be written in terms of the factorization of operators, which we also show. Finally, in
Section 4, we prove an integral inequality for operators in which the range of functions is restricted to a certain interval and we write a new inequality for
q-regular operators on Lorentz spaces to show a concrete example.
Let us introduce now some definitions and recall some known results. If
X is a Banach space, we will write
for the identity map in it; we will simply write
if the space
X is clear in the context.
is the dual of
Consider a
-finite measure space
and the space
of all (classes of) measurable real functions on
, where functions which are equal,
-a.e., are identified. The
-a.e. pointwise order is considered in this space. We use the definition of a Banach function space given in [
2] (p. 28) (Köthe function space). A Banach function space over
is a Banach space
of locally integrable functions in
containing all characteristic functions of measurable sets of finite measure if
with
and
then
and
. Since we restrict our attention to the case of finite measures in this paper, the condition of being locally integrable is simply to be integrable. The space
is order-continuous if for every sequence
such that
satisfies that
. For the case of
-finite measures, the set of all simple functions is dense in any
-order-continuous Banach function space. In particular, order continuity is equivalent to the equality
, that is, all the functionals of the dual space can be represented as integrals in which the functions of the dual space appear. These functions inside the integrals define the so-called Köthe dual space
All these and related matters that are needed for the understanding of this paper can be found in [
15] (Ch. 2) and [
2] (pp. 1–28).
For
, the
p-th power of
is defined as the set of functions
This is a Banach function space over
with the norm
,
whenever
is
p-convex with a
p-convexity constant equal to 1. (We will recall later on what
p-convexity is.) The
p-th power of
is order-continuous if and only if
is so (see [
15] (Ch. 2) or the first chapter of [
2]). The main references for the separation arguments used in the proof of the main results of the paper—for the linear case—are [
3,
16]. We refer to [
17] for issues on Lipschitz operators and to [
4,
18,
19] for general questions on factorization schemes and summability for linear operators on Banach lattices.
Let us recall now some metric notions. A pseudometric satisfies the same axioms as a metric but it could happen that
and
A Lipschitz operator
from a Banach function space
to a pseudometric space
is a map such that for every pair of functions
for a certain constant
The smallest value of constant
K is called the Lipschitz norm, and we write
for it. If it is defined between Banach function spaces
this means that for every pair of functions
We write for the space of real Lipschitz functions of one real variable that are zero at 0.
3. Separation Arguments for Lipschitz Pointwise Transformations of Operators
Let us first introduce some adaptations of the definition of
p-convex and
p-concave Banach lattices and operators. Mimicking the case of the classical definitions for Banach function spaces, we say that an operator
is
-convex if there is a constant
such that for
and
-concave if there is a constant
such that for
A Banach function space is -convex if the identity map in it is, and the same for -concavity. For when is the identity in and we get the classical definitions of p-convexity and p-concavity.
For a linear operator
, we say that it is
-regular if there exists a constant
R such that for
For
, we get the definition of a
-regular operator [
20,
21]; the case
is the most relevant from the point of view of the classical theory [
2].
3.1. Direct Adaptation for Lipschitz Pointwise Transformations of the Classical Maurey–Rosenthal Factorizations
Let us start with the natural extension to the considered case of a factorization through an
-space. In the case that
and it is the identity map in
we have a well-known result: the factorization of every
p-concave operator from an order-continuous
p-convex space through an
-space (see, for example, [
3]).
Theorem 1. Let . Let be an order-continuous p-convex Banach function space and be a Banach function space. Let be a linear (continuous) operator. The following statements are equivalent.
- (i)
T is -concave.
- (ii)
There is a function such that
Proof. Now, let us present the standard proof, which will serve as the basis for the more advanced versions that we will introduce later. (For similar proofs, see [
3,
10,
16].) (ii) ⇒ (i) is just a direct computation, so let us see (i) ⇒ (ii). We can assume without loss of generality that the
p-convexity constant of
is equal to one. (Otherwise, we renorm the space with an equivalent norm with a
p-convexity constant equal to 1.) Then, we have that its
p-th power
is a Banach function space with the norm
(see [
15] (Ch. 2)).
is order-continuous, then its
q-th power is so (see [
15] (Ch. 2)), from which we have that
is defined by integrable functions, that is, the dual space coincides with the Köthe dual (see [
2] (p. 28)), and the duality is given by the integral of the product.
For each finite family
and positive real numbers
such that
, we define the function
Now, fix
as a function as before. We claim that there is an element
h for which
. Since we have the inequalities for single finite sets of functions and coefficients equal to one on the
-concavity of
T, we need to use an easy approximation trick for real numbers using rational numbers to show that
(Although it is not explicitly proven in [
10], there is a reference in this paper to this trick.) Take a convex combination as the one above, and find an approximation of each
by rational numbers up to an
as as small as we want. Note that by the definition of
-concave operators, we have that we can repeat as many terms as we want. We can find rational numbers
for each
such that the denominator
s is the same for all of them, and
Thus, we only need to repeat each term
times in the inequality and divide the whole inequality by
s to obtain an approximation of the inequality with the coefficients
that are controlled by
Since
is arbitrary, we obtain the inequality that we need. Therefore, the functional
that attains the norm in the right part of the the definition of
satisfies
, as a consequence of the (new)
-concavity condition.
A Ky Fan lemma argument (see [
4]) applies: each of these functions is convex and continuous with respect to the weak* topology and is defined in the ball of the dual space
(weak* compact and convex), and the family of these functions is closed under convex combinations, so it forms a concave family of functions. Thus, there exists
such that
for all the functions
defined in the argument above. Considering single functions
and
, we obtain the desired integral inequality in (ii). □
Note also that, due to the duality in
and the property that the function
h indices a norm one (and so continuous) map, we have
Theorem 1 can be written again as a factorization result using the general diagram provided by Remark 2. Indeed, we have that
T can be factored as
where
is a (metric) subspace of
(defined as the closure of the range of
) and
is a continuous map (the inequality in part (ii) of the theorem clearly implies this) defined from
T to obtain a commutative diagram. It can be seen that it is well defined and continuous because of the domination obtained in (ii).
Corollary 1. If is p-convex and order-continuous, and there is a function such that the spaces and can be metrically identified (that is, the equivalence classes defined by the corresponding pseudometrics can be identified).
Proof. This is just a consequence of Theorem 1. Indeed, in this case, we get the factorization
where
is a Lipschitz map that identifies the equivalence classes in both the spaces involved. □
3.2. Non-Homogeneous Expressions and Factorization for the Metric Extensions of Linear Operators
We have shown in the previous section how the pointwise composition with Lipschitz maps provides new cases and opens the door to possible applications. However, the main purpose of introducing this type of transformation has not yet been revealed. As we announced in the Introduction, this technique allows one to work with such kinds of metric factorization involving non-homogeneous transformations. Note that, although and do not in general give a homogeneous transformation, the “outer” part of the inequalities (i.e., the action of the norm and the operation ) are positively homogeneous. From a technical point of view, this is why the same arguments used in the classical Maurey–Rosenthal theory are still applicable here.
We will work now with a different non-homogeneous vector norm inequality involving different powers. We will say that a linear operator
is
-Lip-concave if for
, the following condition is satisfied:
An example—in fact, our main reference—of such a kind of operator is the identity map in when in Example 1(b), which “cuts” the functions in the range. Let us write with for the general version of the function which we define as For simplicity, we consider the case which has the property that the maximal variation in the corresponding function equals
Take now
Then, for every couple of functions
and
The relevant part of this example is that the order of the indices p and q can be opposite to the usual order for which this factorization holds. Due to the ordering of the norms of probability measure spaces, the inequalities for the norms are exactly the other way round; if then This is why we are interested in considering such a type of Lipschitz function, which could be used to obtain different kinds of results.
Theorem 2. Let . Let be an order continuous q-convex Banach function space and be a Banach function space. Let be a linear (continuous) operator. The following statements are equivalent.
- (i)
T is -Lip-concave, that is, for , we have - (ii)
There is a function such that for all , we have that
Proof. The proof follows the same steps as the one of Theorem 1. Assume (i). Since
is
q-concave (with constant equal to 1), we have that
is an order-continuous Banach function space, and so its dual space is composed of integrals. The inequality then appears to be
The functions can be defined as in Theorem 1, and the argument in it for proving that the convex combinations also belong to the same class of functions can also be used here. The Ky Fan lemma applies again to give (ii). The converse if given by a direct calculation. □
Inspired by the inequality
that is equivalent to the one obtained in (ii), let us define a new type of (pseudo)metric associated with the (pseudo)distances
Suppose that
which is a relevant case since it is the opposite one to the natural inequalities for the
norms. Note that
and then the right hand side of this inequality gives
, which is again a pseudometric. The inequality above can be then read as
which evidences the commutativity of the following diagram and the Lipschitz condition of all the arrows in it. Indeed, for
and taking into account that by the
-Lip-concavity of
T we have
we get the factorization scheme
Let us show an example of a -Lip-concave operator.
Example 2. Let be Banach function spaces over probability measures μ and and be a linear and continuous operator.
- (a)
Consider the hyperbolic tangent function that is Lipschitz with a constant equal to Take For every function we have that for If we consider the case and with μ being a probability measure, and Assume also that T is a q-regular operator with q-regularity constant Then, just by integrating the expression above, we get Therefore, T is a -Lip-concave operator.
- (b)
Consider now the exponential function and is a q-regular operator with constant 1, we obtain a similar result: for Thus, T is a -Lip-concave operator with constant .
4. Application: Pointwise Restrictions in the Range of Linear Operators between Banach Function Spaces
Maurey’s classical factorization of linear operators between spaces of integrable functions allows the reduction of the study of general Banach function lattices to the case of operators between -spaces. Under adequate lattice-type geometric requirements, such as p-convexity, p-concavity or p-regularity, we finally reduce the general operators to simple integral inequalities. The aim of this section is to show how we can apply the general staff of the lattice geometry of function spaces to obtain such kinds of simplifications of general operators when we apply Lipschitz transformations to the functions involved. Although the same technique can be used for other transformations (as we have shown in the previous sections), we will focus our attention on restrictions in the range of the functions that are in the image of linear operators.
Recall the definition of the the functions
given at the beginning of
Section 3.2. For every
, we define
When applied to any measurable function
we have that
is a measurable function that coincides with
if
and equals
k or
if
or
respectively.
Lemma 1. Let and consider the function defined above. Then, for every measurable function and , we have
Proof. This is a consequence of the following straightforward calculations.
□
Theorem 3. Let . Let be an order-continuous q-convex Banach function space with constant 1 and be a p-convex Banach function space with constant 1. Suppose for simplicity that the inclusion has norm one. Let be a linear q-regular operator with constant that is, for , we have Then, there is a function such that for all Proof. First, note that the inequality defining the
q-regularity can also be written for difference of vectors
instead of single functions, due to the fact that
T is linear. Recall that, since the measure
is finite, we have that
(see [
15] (Lem. 2.21)), and so we have that
for a certain
N that we assume to be 1 without loss of generality for the aim of simplicity. Furthermore, observe that if a Banach lattice is
p-convex for
then it is also
q-convex (see [
2] (Sec. 1.d)). Taking into account that
T is
q-regular, Lemma 1 and the definition of the
p-th and
q-th powers of the spaces involved (
and
we get for
On the other hand, since
is
p-convex with constant 1, we get
Summing up this information, we get
that is,
T is
-Lip-concave. By Theorem 2, there is a function
such that for all
,
□
Remark 3. There are a lot of examples of p-regular operators between Banach function spaces. In fact, every positive operator is p-regular for every ([2] (Prop. 1.d.9)), and by Grothendieck’s inequality, all operators are two-regular (see [2] (Thm. 1.f.14)). The numbers for which a Banach function space is p-convex are also known for a lot of classical Banach function lattices, such as Orlicz and Lorentz spaces. Example 3. Another relevant example of a Banach function space that is convex for is the space of p-integrable functions with respect to a vector measure m defined on a measurable space which are Banach function spaces for every Rybakov finite (scalar positive) measure for m (see [15] (p. 128)). It is known that every order-continuous p-convex Banach lattice with weak order units can be written as such a space ([15] (Proposition 3.30)), so this class is strictly bigger than the one of the -spaces of finite scalar measures. If and the norm of the inclusion equals As in the case of the standard -spaces, with norm one ([15] (Lemma 2.21(iv))). Take and and consider any operator with a two-regularity constant equal to Then, by Theorem 3, there is a function such that for every where μ is a Rybakov measure for Let us finish the paper by showing some concrete examples of a relevant class of Banach function spaces: the so-called Lorentz function spaces. As we said, nowadays there is a lot of work in the literature about the convexity of Lorentz and related spaces (see, for example, [
22,
23,
24]). However, for the aim of this paper, we just need the results in [
25]. Let us briefly introduce these spaces.
Let
and
Given a finite measure space
the Lorentz space
is defined as the space of real (classes of
-a.e. equal) measurable functions that satisfy that the functional
is finite, where
is the non-increasing rearrangement of
f onto
. This is defined as
For
this has to be renormed to be a norm, but we are interested in the case when
The main result on the
q-convexity of the Lorentz space that we need can be found in Proposition 3.3 in [
25]:
is
q-convex for
(A simple, direct argument using
p-th powers can also be found in [
3] to obtain the same result.) We assume that the
q-convexity constant equals 1; otherwise, we consider the canonical renorming of the space satisfying such a property.
In view of Theorem 3, we can obtain the following integral domination for pointwise restrictions in the range of linear operators on Lorentz spaces. To prove it, just take into account that for the Lorentz space is order-continuous.
Corollary 2. Let and Suppose that and let be a -regular operator with constant under the requirements of Theorem 3. Then, for every , there is a function such that for all Note that, if the requirement for the inclusion to be norm one does not hold, the constant appearing in the domination has to be recomputed according to the value of the norm N.