Next Article in Journal
Fabrication of Alginate/Ozoile Gel Microspheres by Electrospray Process
Previous Article in Journal
Boosting the Sensitivity and Hysteresis of a Gel Polymer Electrolyte by Embedding SiO2 Nanoparticles and PVP for Humidity Applications
Previous Article in Special Issue
Interfacial Rheological Study of β-Casein/Pectin Mixtures at the Air/Water Interface
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Gels
Volume 10
Issue 1
10.3390/gels10010051
gels-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Thermal Properties and Dynamic Rheological Characterization of Dioscorea Starch Gels

by
Bolanle Omolara Otegbayo
1,*,
Abiola Rebecca Tanimola
1,
Julien Ricci
2 and
Olivier Gibert
2,3,4,5
1
Department of Food Science & Technology, Bowen University, P.M.B. 284, Iwo 232102, Osun State, Nigeria
2
CIRAD, AGAP Institute, Avenue Agropolis, BP 5035, 34398 Montpellier, France
3
University of Montpellier, CIRAD-INRAE-Institut Agro, 34398 Montpellier Cedex 5, France
4
CIRAD, UMR Qualisud, 34398 Montpellier Cedex 5, France
5
Qualisud, University Montpellier, Avignon Universite, CIRAD, Institut Agro, IRD, Université de La Réunion, 34398 Montpellier Cedex 5, France
*
Author to whom correspondence should be addressed.
Gels 2024, 10(1), 51; https://doi.org/10.3390/gels10010051
Submission received: 11 July 2023 / Revised: 6 November 2023 / Accepted: 7 November 2023 / Published: 10 January 2024
(This article belongs to the Special Issue Recent Advance in Food Gels)
Browse Figures
Versions Notes

Abstract

:
Yam (Dioscorea. sp.) is an edible starchy tuber with potential for being a commercial source of starch for industrial purposes, but yam starch is underutilized. The dynamic oscillatory and thermal properties of yam starches from sixteen varieties each of Dioscorea. rotundata, Dioscora. alata, Dioscorea. bulbifera and one variety of Dioscorea. dumetorum from Nigeria were studied to determine their potential for industrial utilization. The storage modulus, loss modulus, damping factor and complex viscosity as a function of frequency (ω) of the dioscorea gels, as well as the onset temperature (To), peak gelatinization temperature (Tp), end of gelatinization (TC), and gelatinization enthalpy of the starches were determined by standard procedures. Results showed that all the dioscorea starches showed a typical elastic behavior with the magnitude of G′ greater than G″ while tan δ < 1 in all varieties. Thus, the starch gels were more elastic than viscous. All the starch gels exhibited shear thinning characteristics and showed frequency (ω) independence characteristics of weak gels. D. rotundata varieties had the lowest ∆Hgel, while D. bulbifera varieties had the highest. The diversity of the visco-elastic and thermal properties of the yam starch gels from different varieties and species can be an advantage in their utilization in both food and non-food industries.

1. Introduction

Yams are edible starchy storage tubers that have cultural, economic, and nutritional importance. Starch accounts for 80% (on a dry weight basis) of the yam tuber [1]. Nigeria is the leading producer of yams in the world [2], but yam starch is largely unexploited. This is probably due to the fact that yam starch has not benefitted from the degree of value-added research required to ensure commercial competitiveness on an international scale. This has led to minimal information being available on the functionality and subsequent industrial potential of yam starch. Starch is a very important industrial raw material. They are utilized in diverse industries: as binders, thickeners, viscosity providers, glazing agents, clouding agents, flowing agents, and encapsulating agents in food products; as flocculation and retention aids, sizing agents, coating agents, and adhesives in the paper industry; as printing thickeners and warp sizing agents in the textile industry and as fluid loss control additives in subterranean drilling [3]. The physicochemical and functional properties of starches have been reported to determine their potential uses or applications [4,5]. The rheological and gelatinization properties of starch are important functional properties which determine most of its utilization. The rheological property includes the deformation behavior and flow of foods under well-defined conditions [6]. Components of rheological properties of starches include the pasting characteristics as well as the viscosity and rheological characteristics of starch gel [3]. The rheological characteristics of starch gels are important in product development, quality control, sensory evaluation, and process designing because they enable researchers to identify the molecular structure or distribution of the molecular components of foods and also predict and describe the structural modifications of foods during manufacturing processes [7,8]. They can also quantify both the viscous and the elastic properties of a material at different time scales and frequencies. Thus, rheological characteristics are a valuable tool for understanding the structural and dynamic properties of starch systems without breaking their structural elements [9]. Storage modulus (G′) is a measure of deformation energy stored in the material during the shear process. It represents the elastic behavior of the sample. Loss modulus (G″) is a measure of the deformation energy lost per cycle of sinusoidal deformation; it represents the viscous behavior of the material. The loss tangent (Tan δ) or damping factor (G″/G′) indicates the physical behavior of a system, thus showing the ratio of the viscous and the elastic portion of the viscoelastic deformation [10,11], while complex viscosity (Ƞ*) is the ability of the gel to resist shearing forces. Characterizing the dynamic rheological properties of yam starch can thus give an insight into its potential utilization and the scope of its industrial utilization, thus adding value to yam. The pasting characteristics of yam tubers have been characterized [4,12], and the dynamic oscillatory characteristics of raw yam tubers have also been reported [13]. Thermal properties, starch transition temperature and gelatinization enthalpies usually indicate the order–disorder transition that takes place during the heating of aqueous suspension of starch granules. It identifies the melting, crystallization events and glass transition temperatures of the starch. However, there is a paucity of information on the rheological and thermal properties of yam starch gels from Nigeria. This is necessary in order to explore the industrial potential of yam starch. Hence, this study was focused on determining the dynamic oscillatory and thermal properties of starch gels from sixteen varieties of four yam species (D. rotundata, D. alata, D. bulbifera and one variety of D. dumetorum) in order to determine their potential utilization for food and non-food applications. Other physicochemical characteristics of these yam starches such as in situ dynamic oscillatory properties, pasting characteristics, digestibility, granule morphology, and particle size analysis have been reported [13,14].

2. Results and Discussion

2.1. Chemical Composition of Yam Starches

The chemical composition of the yam starches is presented in Table 1. The average mean of crude protein (D. alata; 0.07%, D. bulbifera; 0.09%, D. dumetorum; 0.15%, D. rotundata; 0.11%), fat (D. alata; 0.13%, D. bulbifera; 0.30%, D. dumetorum; 0.50%, D. rotundata; 0.31%) and ash (D. alata; 0.24%, D. bulbifera; 0.37%, D. dumetorum; 0.19%, D. rotundata; 0.36%) of the yam starch samples, respectively, were all less than 1% and were in agreement with the report of previous authors [15,16,17], although variation in these constituents exists among the varieties. The low content of these non-starch constituents reflects the efficiency of the starch extraction process and purity of the starch [18]. The purity of the starch is high when the lipid content is less than 1%, protein content is less than 0.2% and ash is less than 0.5% [18,19]. In terms of the amylose content, there were both intraspecies (within the same species) and interspecies (among the yam species). Among the yam species, there was no significant difference (p > 0.05) in the amylose contents of D. alata, D.bulbifera and D. alata (24.44–26.03%), but the amylose content of D. dumetorum was significantly (p < 0.05) lower (17.08%). This result agrees with previously reported values for yam starches. Differences in the amylose content of yam starches within the same species may be a result of the genotype, botanical source and activity of the enzymes involved in the biosynthesis of various starches [20,21].

2.2. Rheological Properties

The rheological properties and the typical mechanical spectra of the yam starch gels are presented in Figure 1a–d and Figure 2a–d. The mechanical spectra showed that the yam starch gels have both elastic and viscous components, but the elastic component dominated with G′ greater than G″, indicating that they are true gels and exhibited visco-elastic properties, which agrees with [22] and also corroborates the report of Moorthy [23] on root and tuber starches. Tangent δ, which is the ratio of the viscous and elastic behavior of the yam starch gels, ranged 0.09–0.34 and was less than unity (<1) in all of the yam starches, indicating that the starch gels were more elastic than viscous [10,11].
The G′ and G″ of the starches increased during cooling from 90 to 25 °C, while the lower tan δ of the cooling starches indicates the formation of an elastic gel as a result of starch retrogradation and interactions between leached amylose and starch granules, leading to an increase in gel strength [24,25]. The order of G′ among the yam starch gels was D. bulbifera > D. dumetorum > D. alata > D. rotundata, (Figure 2b); thus, D. rotundata starch gels had the lowest G′ and therefore were the least elastic among the dioscorea starch gels. According to Sundaram et al. [26], the elasticity of a gel quantified as G′ is a measure of the gel’s ability to resist deformation when pressure is applied: the higher the G′, the less it deforms under pressure and the more stored energy it retains. The implication of this in this study is that yam starch gels from varieties in D. rotundata species will be more deformable and malleable during processing compared to those from D. bulbifera sp. with the highest G′, which can resist deformation during processing. The lower G′ of yam starch gels from D. rotundata species may be a result of weaker granule integrity due to greater water uptake and swelling [3]. The higher G′ of yam starch gels from D. bulbifera sp. may also be adduced to their large granules [4]. The higher G′ of starch gels from D. bulbifera varieties compared with the other yam starch gels implied that they are more elastic than other yam starch gels. The summary of the rheological parameters of each of the yam species is presented in Figure 3a–d.
The order of the G′ in the yam starch gels of varieties in D. bulbifera was TDb 3884 > TDb 3084 TDb 3048 > TDb 3069 > TDb 3059, while the order in D. alata was TDa 291 > 92-2 > TDa 01/00012 > TDa 93-36 > TDa 297, and in D. rotundata, it was Baidza 89/02665 > Amula > TDr 93-31 > TDr 99-15 (Figure 4a–c).
In terms of the frequency sweep, it was observed that both moduli (G′ and G″) in the yam starch gels increased with increasing frequency but to a lesser extent in D. bulbifera starch gels (Figure 4a–c). This is similar to the report of Barual et al. [27]. The increase in the G′ of the starch gels with the increase in frequency showed that they exhibited frequency dependency. The order of the frequency dependence of G′ of the starch gels from the yam species was D. bulbifera < D. dumetorum < D. alata < D. rotundata.
Among the D. alata varieties, TDa 297and TDa 92-2 were less frequency dependent than TDa 01/00012, TDa 93-36 and TDa 291(Figure 4a), while TDa 291 with the highest G″ was the most viscous of the D. alata starch gels.
In the D. rotundata sp., TDr 93-31 and TDr 99-15 were less frequency dependent, while Baidza formed the most frequency-dependent starch gel (Figure 4b).
The frequency-dependent characteristics of starch gels have been reported as typical of weak gels [28]. The lower frequency-dependent characteristic exhibited by D. bulbifera starch gels was probably a result of the formation of a rigid structure [13], which may be more resistant to deformation due to the stress increase or mechanical fragmentation or shear during processing. Previous authors [8,29] reported that the frequency dependence of a starch can provide important information on the structure of the gel.
Starch gels which are frequency independent indicate a solid-like gel and a true gel, while frequency-dependent gels may imply a gel structure with molecular entanglements. Hence, they act as solid at higher frequencies (low tan δ) and as a liquid at lower frequencies (high tan δ) [30]. According to Keetels et al. [31], the stronger the dependence of G′ on frequency, the lower the stiffness of the gel. The implication of this in this study is that that the starch gels of yam varieties from D. bulbifera, D. dumetorum and D. alata were stiffer or stronger compared with that of D. rotundata with starch gels from varieties of D. bulbifera being the strongest and stiffest.
Tan δ was less than unity (<1) in all of the yam starch gels; this implied that the starch gels were more elastic than viscous and formed a typical gel network. The higher the tan δ, the more viscous the starch gel. Chakraborty et al. [32] reported that a lower tan δ indicates a typical gel network and starch gels with stronger gelling ability. Of all the starch gels from the yam species studied, starch gels from varieties of D. rotundata had the highest tan δ indicating the most viscous starch gels, while D. bulbifera varieties had the lowest; hence, it produced the most elastic gel (Figure 2b). The tan δ value of D. bulbifera (0.09–0.11) implied that the yam starch gels can be classified as glassy and crystalline polymers which are usually strong and rigid gels, while those of D. bulbifera, D. dumetorum and D. alata with tan δ (0.1–0.3) can be classified as amorphous polymers which form weak gels [33].
Among the D. alata varieties, the order of tan δ was TDa 93-36 > TDa 297 > TDa 291 > TDa 92-2. This implies that TDa 93-36 was the most viscous, while TDa 92-2 formed the most elastic gel (Figure 4a). Amongst the D. rotundata varieties, TDr 99-15 and Amula had the highest tan δ and hence were the most viscous, while tan δ of TDr 93-31, Baidza and TDr 89/02665 (Figure 4b) were lower; hence, they formed more elastic gels. Amongst the D. bulbifera starches, the order was 3069 > 3059 > 3884 > 3048 > 3084 (Figure 4c). D. bulbifera starch gels had the lowest tan δ among all the yam starches.
From an industrial application point of view, the result of the tan δ of these yam starch gels implies that the starch of D. bulbifera (with lower tan δ) will be very elastic, not easily deformable or stiff and may be difficult to process, while D. rotundata starch gels (with higher tan δ) will be less elastic, more deformable and will be easier to process than the other starch gels. This will also influence their utilization as thickeners, binders or fillers in the food and pharmaceutical, industries or other non-food industries such as cosmetic or textile industries or for other commercial uses.
In terms of the Ƞ* which is the ability of the gel to resist shearing forces (it also reveals soft–solid structure rigidity differences between starch gels). The complex viscosity of all the starches decreased as the frequency increased. This indicates that all the yam starches underwent shear thinning to viscosity. A viscosity decrease (thin out) during an increase in shear force is called shear thinning [34]. Among the yam starch gels, the complex viscosity was in the order D. bulbifera > D. alata > D. dumetorum > D. rotundata. This showed that D. bulbifera starch gels had the highest complex viscosity, implying that it had the highest resistance to shear thinning and exhibited the strongest pseudoplastic behavior. There was intraspecies variation in the complex viscosity of the starch gels, but generally, all the varieties within D. bulbifera species had higher complex viscosity compared to starch gels from the other yam species; hence, they had higher resistance to shear thinning than all varieties within the other yam species. The implication of this is that since the rheological properties were evaluated under conditions that were very close to industrial processing conditions, it means that all the yam starch gels except D. bulbifera starches will have little resistance to shear thinning or mechanical fragmentation (breakdown in viscosity) during mechanical shear or during processing.
Differences in the viscoelastic properties of the starch gels or different responses to dynamic moduli may be attributed to their starch granule properties (rigidity and integrity), intergranular interaction such as entanglement between surface molecules of adjacent granules in gelatinized starches and biological origin of the starches and amylose contents [13,34,35].

2.3. Thermal Properties of Dioscorea Starches

DSC is usually used to study the thermal behavior of starches. The thermal properties of starches usually indicate the order–disorder transition that takes place during the heating of an aqueous suspension of starch granules. It identifies the melting, crystallization events and glass transition temperatures of the starch. The transition temperatures (To, Tp, Tc) are related to the internal crystalline structure of the starch and its thermal stability [36]. The enthalpy of gelatinization (∆Hgell) gives an overall measure of crystallinity (quality and quantity of crystallites), and it is an indicator of the loss of double helical order; that is, it is a loss of molecular order within the granule or the energy needed for the dissociation of the double helical order. The peak gelatinization temperature Tp is an indication of the crystallite quality (double helix length). The onset temperature (To) range was 71.63–76.80 °C, the peak gelatinization temperature (Tp) range was 76.32.2–81.40 °C, the end of gelatinization (TC) range was 80.36–85.86 °C (Table 2), the gelatinization enthalpy or total energy ∆Hgel range was 16.33–17.67 J/g, while the gelatinization temperature range R was 7.82–9.07 °C. The transition temperatures To, Tp, TC and ∆Hgell of these yam starches agreed with [37] but the ∆Hgel was less than the 22–25 J/g reported for D. trifida [38] and also lower than the range of 23.08–31.23 J/g [39] reported for some Chinese yam starches. In addition, higher transition temperatures (To, Tp, Tc and R (Tc − To)) than those reported in this study were reported for nine yam starches from D. opposita species [40]. On average, in this study, yam varieties from D. alata (TDa) and D. bulbifera (TDb) had higher To and Tp than D. rotundata (TDr), while TDr had a higher enthalpy of gelatinization (∆Hgell) than the other yam starches. The higher transition temperature of starches from TDa and TDb could be attributed to their less crystallinity (due to higher amylose, as seen in Table 2) and could also be the result of a more rigid granular structure [13]; hence, they did not gelatinize easily. The high Tp values of these starches may also suggest that they have longer chain lengths, since starches with longer chains have been reported to require higher temperature to dissociate completely compared with that required for shorter double helices [41]. The lower transition temperature and higher ∆Hgel of D. rotundata could also be attributed to its higher crystallinity due to higher amylopectin. The industrial implication of its lower ∆Hgel is that it will have lower energy requirements for starch gelatinization during processing. High ΔHgel values signify the energy required for disentanglement and melting of the double helical structures formed during gelatinization [42]. In the case of D. dumetorum (TDd), the high ∆Hgel may be attributed to its low amylose (Table 1) and higher amylopectin content (since low amylose indicate higher amylopectin). This is because starches with lower amylose content have more crystalline points; this high degree of crystallinity provides the structural stability which makes the granule more resistant to gelatinization. Hence, more energy is needed to initiate melting in the absence of amylose-rich amorphous regions, requiring a higher gelatinization temperature [43,44]. There was no significant difference (p > 0.05) among the yam starches in terms of the R (Tc − To) value, although TDr starches had the highest. Differences in the R values of starches from different species/varieties may imply a higher degree of heterogeneity (crystallites with different sizes and strength) and stability among the crystallites [39,45,46,47]. Therefore, the gelatinization temperature range of yam starches with large R values indicates that they have a higher degree of heterogeneity among their crystallites. Intraspecies variations in the thermal properties of these dioscorea starches were observed. For instance, among the D. alata species, TDa 92-2, TDa 291, and TDa 01/00012 had higher transition temperatures and ∆Hgel compared to other varieties. The variation in transition temperatures and ∆H J/g among varieties of the same cultivars has been adduced to reasons such as the interaction between starch and non-starch components, the molecular architecture of the crystalline region, the amylose contents, the length of amylopectin chains, and the shape and size of granules [25,48,49]. The variation in the thermal properties of these yam starches showed that they will have different energy requirements as raw materials during processing (such as sterilization, pasteurization, cooking time), heat conductivity requirements, cost reduction, food quality and safety, which can influence their selection for specific applications.

3. Conclusions

Rheological analyses of the yam starch gels from the sixteen yam varieties revealed that all the yam starches showed a typical elastic behavior with G′ > G″, while tan δ was less than unity (<1) in all of them, indicating that the starch gels were more elastic than viscous. However, there were differences in the viscoelastic properties of the gels or different responses to dynamic moduli within varieties in a species (intraspecies variation) and among the species (interspecies variation). The different responses of the yam starch gels to dynamic moduli may be a result of their botanical origin and starch granule properties (rigidity and integrity). The complex viscosity (Ƞ*) of all the starch gels decreased, implying shear thinning characteristics. D. bulbifera varieties had the highest complex viscosity values, which implied that these yam starches will exhibit the least shear thinning properties during processing; hence, they may be useful for products requiring high viscosity. Varieties within the D. bulbifera species exhibited the least frequency-dependent characteristics, while the G′ of D. rotundata, D. dumetorum and D. alata starch gels increased with the increase in frequency (ω), implying there being more frequency-dependent characteristics of weak gels. Due to the lower tan δ of D. bulbifera starch gels, they will be more elastic and stiffer and may be difficult to process when compared with starch gels from D. rotundata, D. alata and D. dumetorum with higher tan δ, which may be more malleable and amenable during processing. Thus, starch gels from D. rotundata and D. alata varieties may be used in food industries as thickeners binders, gelling, glazing, clouding agents, etc., while D. bulbifera starches may be utilized as viscosity builders and could also be used in textile industries as stiffeners. Diversity in the viscoelastic properties of the yam starch gels from different varieties and species can be an advantage in their utilization in both food and non-food industries. In terms of the thermal properties of the yam starch gels, the higher transition temperatures of the starch gels of D. bulbifera, D. dumetorum and D. alata compared to that of D. rotundata implied that they will have more energy requirement to affect the gelatinization of their starches during processing. The variation in the thermal and rheological properties of these yam starch gels implies that yam starch from the different varieties of these yam species can be used as raw materials for specific applications in the food industry and non-food industry.

4. Materials and Methods

4.1. Materials

Sixteen varieties each of D. rotundata (TDr 93-31,TDr 99-15, TDr 89/02665, Amula, Baidza), D. alata (TDa 291, TDa 297, TDa93-36, TDa 01/00012), D. bulbifera (TDb 3059, TDb 3069, TDb 3048, TDb 3884TDb 3084), and one variety of D. dumetorum (TDd) (esuru funfun) were collected from the IITA yam germplasm of International Institute of Tropical Agriculture (IITA), Ibadan, Nigeria.

4.2. Methods

4.2.1. Yam Starch Extraction

Starch was extracted from the sixteen varieties of yam, respectively, as described in Otegbayo et al. [50]. The yam tubers were diced into small cubes and homogenized with distilled water (excess) in a blender. The blender was used in short bursts to avoid heating the starch. The slurry was filtered through a muslin cloth; then, the slurry was poured in containers and allowed to sediment for about 2 h. The supernatant was discarded; then, the sediment which is the yam starch was washed several times with distilled water to remove impurities from the starch. The starch was oven dried at a temperature of 30 °C for 48 h. The dried starch samples were pulverized with the Waring blender and ground to pass through a 100 µm mesh size sieve. The milled starch samples were packed in a zip-lock bag and kept in a desiccator prior to analyses.

4.2.2. Proximate Composition of Starch Samples

The proximate composition (moisture, protein, ash, fat) of the starch samples was determined in triplicate by AOAC [51] methods.

4.2.3. Amylose Content

The amylose content of the yam starch samples was determined as described by Mestres [38,52] using a differential scanning calorimetry (DSC, Perkin-Elmer DSC 7, Norwalk, CT, USA). First, 10–11 mg of starch, 50 μL of lyso-phospholipid and 2% distilled water (w/v) was loaded into stainless steel sealed pans. A pure amylose potato starch sample (Avebe, Veendam, The Netherlands) was used as a standard. The samples were hermetically sealed and allowed to stand for 1 hour before heating in the DSC. The DSC analyzer was calibrated using indium, and an empty aluminum pan was used as reference. The sample pan and the empty reference pan were heated from 25 to 160 °C at a scanning rate of 10 °C per min and held for 2 min at 160 °C and cooled to 60 °C at 10 °C min−1. The amylose/lyso-phospholipid complex enthalpy variation (ΔH) for samples and standard were determined. The amylose content was computed as the percentage ratio of the ΔH amylose of the sample to the ΔH amylose of the standard. The analysis was performed in duplicate, and mean values were calculated.

4.2.4. Thermal Properties

The thermal properties of the starch samples were investigated by differential scanning calorimetry (DSC, Perkin-Elmer DSC 7, Norwalk, CT, USA). First, 10–11 mg of starch and 50 μL of 2% (w/v) lyso-phospholipid was loaded into stainless steel sealed pans. The samples were hermetically sealed and allowed to stand for 1 hour before heating in the DSC. The DSC analyzer was calibrated using indium, and an empty aluminum pan was used as reference. The sample pan and the empty reference pan were heated from 25 to 160 °C at a scanning rate of 10 °C min−1, held for 2 min at 160 °C and cooled to 60 °C at 10 °C min−1. The gelatinization enthalpy variation (ΔH) and the onset gelatinization temperature (To) of each sample were determined on each thermogram within the 55–90 °C range of the linear baseline. The analysis was performed in duplicate, and mean values were calculated.

4.2.5. Preparation of Starch Gels

Starch paste (8% db) was prepared by dispersing the starch in 20 ml of distilled water and gelatinized for 15 min in a water bath maintained at 95 °C with continuous stirring.

4.2.6. Rheological Characterization of Starch Gels

The pastes were immediately transferred to the rheometer (Physica MCR 301 rheometer). The rheometer was equipped with a cone plate geometry (diameter = 35 mm, cone angle = 1°, measurement gap = 1 mm) and was computer controlled with Rheowin195 3 job manager software. The starch was cooled from 95 to 25 °C on the rheometer, and the dynamic moduli (G′ and G′’) was determined. A frequency sweep was carried out from (0.1 to 100 Hz). The viscoelastic range for each yam variety was checked by normal force sweep (0.5 to 100 N) and strain sweep (0.01 to 100%).

4.2.7. Statistical Analysis

Data generated were subjected to analysis of variance using SAS package version 9.1 (Statistical Analysis Systems of SAS Institute, Inc., Cary, NC, USA). Analysis of variance and means separations were calculated by the general linear model (GLM) procedure.

Author Contributions

Conceptualization: B.O.O. and O.G., Data curation: B.O.O., A.R.T. and O.G.; Formal analysis: B.O.O. and O.G.; Investigation: B.O.O. and O.G., J.R. Project administration: O.G., Supervision: O.G.; Writing—original draft: B.O.O. and A.R.T.; Writing—review and editing: B.O.O. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by African Women in Agriculture Research and Development (AWARD) through the Agropolis foundation, Montpelier, France. The APC was funded by Bowen University, Iwo, Osun State, Nigeria.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available on request from the corresponding author. The data are not publicly available due to ongoing research using some of the data.

Acknowledgments

The authors acknowledge the African Women in Agriculture Research and Development (AWARD) for funding the postdoctoral fellowship supported by the Agropolis Foundation, France. The APC was funded by Bowen University, Iwo, Osun State.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Ehounou, A.E.; Cornet, D.; Desfontaines, L.; Marie-Magdelein, C.; Maledon, E.; Nudol, E.; Beurier, G.; Rouan, L.; Brat, P.; Lechaudel, M.; et al. Predicting quality, texture and chemical content of yam (Dioscorea alata L.) tubers using near infrared spectroscopy. J. Near Infra. Spectro. 2021, 29, 128–139. [Google Scholar] [CrossRef]
  2. FAOSTAT Statistical Database. Food and Agriculture Organization of the United Nations. 2019. Available online: http://www.fao.org/faostat/en/ (accessed on 3 March 2022).
  3. Ai, Y.; Jane, J. Gelatinization and rheological properties of starch. Starch/Stärke 2015, 67, 213–224. [Google Scholar] [CrossRef]
  4. Otegbayo, B.O.; Ogunniyan, D.; Akinwumi, B. Physicochemical and functional characterization of yam starch for potential industrial applications. Starch/Stärke 2014, 66, 235–250. [Google Scholar] [CrossRef]
  5. Ai, Y.; Jane, J. Understanding Starch Structure and Functionality. In Starch in Food; Woodhead Publishing: Sawston, UK, 2018; pp. 151–178. [Google Scholar] [CrossRef]
  6. Bourne, M. Food Texture and Viscosity: Concept and Measurement; Elsevier: Amsterdam, The Netherlands, 2002. [Google Scholar]
  7. Koocheki, A.; Razavi, S.M. Effect of Concentration and Temperature on Flow Properties of Alyssum homolocarpum Seed Gum Solutions: Assessment of Time Dependency and Thixotropy. Food Biophys. 2009, 4, 353–364. [Google Scholar] [CrossRef]
  8. Karwasra, B.L.; Gill, B.S.; Kaur, M. Rheological and structural properties of starches from different Indian wheat cultivars and their relationships. Int. J. Food Prop. 2017, 20 (Suppl. S1), S1093–S1106. [Google Scholar] [CrossRef]
  9. Gunasekaran, S.M.; Mehmet, A.K. Dynamic oscillatory shear testing of foods- selected applications. Trends Food Sci. Technol. 2000, 11, 115–127. [Google Scholar] [CrossRef]
  10. Chen, L.; Ma, R.; Zhang, Z.; Huang, M.; Cai, C.; Zhang, R.; McClements, D.J.; Tian, Y.; Jin, Z. Comprehensive investigation and comparison of surface microstructure of fractionated potato starches. Food Hydrocoll. 2019, 89, 11–19. [Google Scholar] [CrossRef]
  11. Singh, J.; Singh, N.; Saxena, S.K. Effect of fatty acids on the rheological properties of corn and potato starch. J. Food Eng. 2002, 52, 9–16. [Google Scholar] [CrossRef]
  12. Tanimola, A.R.; Otegbayo, B.O.; Akinoso, R. Physicochemical properties of yam starches from fifty-five lines of Dioscorea species. Food Res. 2022, 6, 49–61. [Google Scholar] [CrossRef]
  13. Otegbayo, B.O.; Tran, T.; Ricci, J.; Gibert, O. In situ dynamic rheological analysis of raw yam tubers: A potential phenotyping tool for quality evaluation. J. Sci. Food Agric. 2023. Early view. [Google Scholar] [CrossRef]
  14. Otegbayo, B.O. Rheological and Physicochemical Characterization of Yam Starch for Potential Industrial Application. Technical Report of Post Doctoral Research Submitted to IITA Funded by AWARD/AGROPOLIS FONDATION. In Proceedings of the Triennial Symposium of the International Society for Tropical Root Crops (ISTRC), Montpelier, France, 23–28 September 2012; pp. 1–77. [Google Scholar]
  15. Castanha, N.; Villar, J.; da Matta, M.D., Jr.; Dos Anjos, C.B.P.; Augusto, P.E.D. Structure and properties of starches from Arracacha (Arracacia xanthorrhiza) roots. Int. J. Biol. Macromol. 2018, 117, 1029–1038. [Google Scholar] [CrossRef]
  16. Londoño-Restrepo, S.M.; Rincón-Londoño, N.; Contreras-Padilla, M.; Millan-Malo, B.M.; Rodriguez-Garcia, M.E. Morphological, structural, thermal, compositional, vibrational, and pasting characterization of white, yellow and purple Arracacha Lego-like starches and flours (Arracacia xanthorrhiza). Int. J. Biol. Macromol. 2018, 113, 1188–1197. [Google Scholar] [CrossRef] [PubMed]
  17. Yong, H.; Wang, X.; Sun, J.; Fang, Y.; Liu, J.; Jin, C. Comparison of the structural characterization and physicochemical properties of starches from seven purple sweet potato varieties cultivated in China. Int. J. Biol. Macromol. 2018, 120, 1632–1638. [Google Scholar] [CrossRef] [PubMed]
  18. Zhu, F. Isolation, Composition, Structure, Properties, Modifications, and Uses of Yam Starch. Compr. Rev. Food Sci. Food Saf. 2015, 14, 357–386. [Google Scholar] [CrossRef]
  19. Dhital, S.; Shrestha, A.K.; Gidley, M.J. Relationship between granule size and in vitro digestibility of maize and potato starches. Carbohydr. Polym. 2010, 82, 480–488. [Google Scholar] [CrossRef]
  20. Naidoo, K.; Amonsou, E.O.; Oyeyinka, S.A. In vitro digestibility and some physicochemical properties of starch from wild and cultivated amadumbe corms. Carbohydr. Polym. 2015, 125, 9–15. [Google Scholar] [CrossRef] [PubMed]
  21. Pérez, S.; Bertoft, E. The molecular structures of starch components and their contribution to the architecture of starch granules: A comprehensive review. Starch-Stärke 2010, 62, 389–420. [Google Scholar] [CrossRef]
  22. Chang, Y.H.; Lim, S.T.; Yoo, B. Dynamic rheology of corn starch– sugar composites. J. Food Eng. 2014, 64, 521–527. [Google Scholar] [CrossRef]
  23. Moorthy, S.N.; Larsson, H.; Eliasson, A.C. Rheological characteristics of different tropical root starches. Starch/Stärke 2000, 60, 233–247. [Google Scholar] [CrossRef]
  24. Redy, I.; Seib, P.A. Modified waxy wheat starch compared to modified waxy corn starch. J. Cereal Sci. 2000, 31, 25–39. [Google Scholar] [CrossRef]
  25. Pycia, K.; Gałkowska, D.; Juszczak, L.; Fortuna, T.; Witczak, T. Physicochemical, thermal and rheological properties of starches isolated from malting barley varieties. J. Food Sci. Technol. 2015, 52, 4797–4807. [Google Scholar] [CrossRef]
  26. Sundaram, H.; Voigts, B.O.B.; Beer, K.; Meland, M. Comparison of the rheological properties of viscosity and elasticity in two categories of soft tissue fillers: Calcium hydroxylapatite and hyaluronic acid. Dermatol. Surg. 2010, 36, 1859–1865. [Google Scholar] [CrossRef] [PubMed]
  27. Barua, S.; Hanewald, A.; Bächle, M.; Mezger, M.; Srivastav, P.P.; Vilgis, T.A. Insights into the structural, thermal, crystalline and rheological behaviour of various hydrothermally modified elephant foot yam (Amorphophallus paeoniifolius) starch. Food Hydrocoll. 2022, 129, 107672. [Google Scholar] [CrossRef]
  28. Tabilo-Munizaga, G.; Barbosa-Cánovas, G.V. Rheology for the food industry. J. Food Eng. 2005, 67, 147–156. [Google Scholar] [CrossRef]
  29. Singh, J.; Kaur, L.; McCarthy, O.J.; Moughan, P.J.; Singh, H. Rheological and textural characteristics of raw and par-cooked taewa (Maori potatoes) of New Zealand. J. Texture Stud. 2008, 39, 210–230. [Google Scholar] [CrossRef]
  30. Ross-Murphy, S.B.; Shatwell, K.P. Polysaccharide strong and weak gels. Biorheology 1993, 30, 217–227. [Google Scholar] [CrossRef]
  31. Keetels, C.J.A.M.; Van Vliet, T.; Walstra, P. Gelation and retrogradation of concentrated starch systems. Food Hydrocoll. 1996, 10, 355–362. [Google Scholar] [CrossRef]
  32. Chakraborty, I.; Govindaraju, I.; Kunnel, S.; Managuli, V.; Mazumder, N. Effect of Storage Time and Temperature on Digestibility, Thermal, and Rheological Properties of Retrograded Rice. Gels 2023, 9, 142. [Google Scholar] [CrossRef]
  33. Ferry, J.D. Viscoelastic Properties of Polymers, 4th ed.; John Wiley & Sons Inc.: New York, NY, USA, 1980; pp. 1–33. [Google Scholar]
  34. Lu, T.J.; Duh, C.S.; Lin, J.H.; Chang, Y.H. Effect of granular characteristics on the viscoelastic properties of composites of amylose and waxy starches. Food Hydrocoll. 2008, 22, 164–173. [Google Scholar] [CrossRef]
  35. Lii, C.Y.; Tsai, M.L.; Tseng, K.H. Effect of amylase content on the rheological properties of rice starch. Cereal Chem. 1996, 73, 415–420. [Google Scholar]
  36. Tarahi, M.; Shahidi, F.; Hedayati, S. Physicochemical, Pasting, and Thermal Properties of Native Corn Starch–Mung Bean Protein Isolate Composites. Gels 2022, 8, 693. [Google Scholar] [CrossRef]
  37. Amani, N.G.; Buleon, A.; Kamenan, A.; Colonna, P. Variability in starch and physico-chemical and functional properties of yam (Dioscorea spp.) cultivated in Ivory Coast. J. Sci. Food Agric. 2004, 84, 2085–2096. [Google Scholar] [CrossRef]
  38. Pérez, E.; Gibert, O.; Rolland-Sabaté, A.; Jiménez, Y.; Sánchez, T.; Giraldo, A.; Pontoire, B.; Guilois, S.; Lahon, M.C.; Reynes, M.; et al. Physicochemical, functional, and macromolecular properties of waxy yam starches discovered from “Mapuey” (Dioscorea trifida) genotypes in the Venezuelan Amazon. J. Agric. Food Chem. 2011, 59, 263–273. [Google Scholar] [CrossRef] [PubMed]
  39. Jiang, Q.; Gao, W.; Shi, Y.; Li, X.; Wang, H.; Huang, L.; Xiao, P. Physicochemical properties and in vitro digestion of starches from different Dioscorea plants. Food Hydrocoll. 2013, 32, 432–439. [Google Scholar] [CrossRef]
  40. Zou, J.; Li, Y.; Su, X.; Wang, F.; Li, Q.; Xia, H. Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study. Molecules 2022, 27, 2254. [Google Scholar] [CrossRef]
  41. Chang, Y.H.; Lin, J.H.; Chang, S.Y. Physicochemical properties of waxy and normal corn starches treated in different anhydrous alcohols with hydrochloric acid. Food Hydrocolloid 2006, 20, 332–339. [Google Scholar] [CrossRef]
  42. Ali, N.A.; Dash, K.K.; Routray, W. Physicochemical characterization of modified lotus seed starch obtained through acid and heat moisture treatment. Food Chem. 2020, 319, 126513. [Google Scholar] [CrossRef]
  43. Stevenson, D.G.; Domoto, P.A.; Jane, J.L. Structures and functional properties of apple (Malus domestica Borkh) fruit starch. Carbohydr. Polym. 2006, 63, 432–441. [Google Scholar] [CrossRef]
  44. Martinez Villadiego, K.; Arias Tapia, M.J.; Useche, J.; Ledesma, Y.; Leyton, A. Thermal and morphological characterization of native and plasticized starches of sweet potato (Ipomoea batatas) and diamante yam (Dioscorea rotundata). J. Polym. Environ. 2020, 29, 871–880. [Google Scholar] [CrossRef]
  45. Chen, N.; Wang, Q.; Wang, M.X.; Li, N.Y.; Briones, A.V.; Cassani, L.; Prieto, M.A.; Carandang, M.B.; Liu, C.; Gu, C.M.; et al. Characterization of the physicochemical, thermal and rheological properties of cashew kernel starch. Food Chem. X 2022, 15, 100432. [Google Scholar] [CrossRef]
  46. Jayakody, L.; Hoover, R.; Liu, Q.; Donner, E. Studies on tuber starches. II. Molecular structure, composition and physicochemical properties of yam (Dioscorea sp.) starches grown in Sri Lanka. Carbohydr. Polym. 2007, 69, 148–163. [Google Scholar] [CrossRef]
  47. Sandhu, K.S.; Siroha, A.K. Relationships between physicochemical, thermal, rheological and in vitro digestibility properties of starches from pearl millet cultivars. LWT Food Sci. Technol. 2017, 83, 213–224. [Google Scholar] [CrossRef]
  48. Liu, X.X.; Liu, H.M.; Fan, L.Y.; Qin, G.Y.; Wang, X.D. Effect of various drying pretreatments on the structural and functional properties of starch isolated from Chinese yam (Dioscorea opposita Thumb.). Int. J. Biol. Macromol. 2019, 11, 1299–1309. [Google Scholar] [CrossRef]
  49. Miao, W.B.; Ma, S.Y.; Peng, X.G.; Qin, Z.; Liu, H.M.; Cai, X.S.; Wang, X.D. Effects of various roasting temperatures on the structural and functional properties of starches isolated from tigernut tuber. LWT 2021, 151, 112149. [Google Scholar] [CrossRef]
  50. Otegbayo, B.O.; Bokanga, M.; Asiedu, R. Physico-chemical composition of yam starch: Effect on textural quality of yam food product (Pounded yam). J. Food Agric. Environ. 2011, 9, 145–150. [Google Scholar]
  51. AOAC. Official Methods of Analysis of the Association of Analytical Chemists, 21st ed.; Association of Analytical Chemists: Gathersburg, MD, USA, 2019. [Google Scholar]
  52. Mestres, C.; Matencio, F.; Pons, B.; Yajid, M.; Fliedel, G. A rapid method for the determination of amylose content by using differential scanning calorimetry. Starch/Stärke 1996, 48, 2–6. [Google Scholar] [CrossRef]
Gels 10 00051 g001aGels 10 00051 g001b
Figure 1. (a) Typical mechanical spectra of D. dumetorum starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa)(duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (b) Typical mechanical spectra of D. alata starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (c) Typical mechanical spectra of D. bulbifera starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (d) Typical mechanical spectra of D. rotundata starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in blue color).
Figure 1. (a) Typical mechanical spectra of D. dumetorum starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa)(duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (b) Typical mechanical spectra of D. alata starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (c) Typical mechanical spectra of D. bulbifera starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in red color). (d) Typical mechanical spectra of D. rotundata starch gel (G′—storage modulus (Pa) (duplicate in blue color), G″—loss modulus (Pa) (duplicate in green color), ω—angular frequency (rad/s), tan δ (duplicate in blue color).
Gels 10 00051 g001aGels 10 00051 g001b
Gels 10 00051 g002aGels 10 00051 g002b
Figure 2. Rheological parameters of yam starches. (a) Storage modulus (G′). (b) Loss modulus. (c) Damping factor (tan δ). (d) Complex viscosity (ƞ*).
Figure 2. Rheological parameters of yam starches. (a) Storage modulus (G′). (b) Loss modulus. (c) Damping factor (tan δ). (d) Complex viscosity (ƞ*).
Gels 10 00051 g002aGels 10 00051 g002b
Gels 10 00051 g003aGels 10 00051 g003b
Figure 3. Summary rheological parameters of (a) D. rotundata starches, (b) D. alata starches, (c) D. bulbifera starches, (d) D. dumetorum starches.
Figure 3. Summary rheological parameters of (a) D. rotundata starches, (b) D. alata starches, (c) D. bulbifera starches, (d) D. dumetorum starches.
Gels 10 00051 g003aGels 10 00051 g003b
Gels 10 00051 g004aGels 10 00051 g004bGels 10 00051 g004cGels 10 00051 g004d
Figure 4. (a) Rheological parameters of D. alata starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*). (b) Rheological parameters of D. rotundata starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*). (c) Rheological parameters of D. bulbifera starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*).
Figure 4. (a) Rheological parameters of D. alata starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*). (b) Rheological parameters of D. rotundata starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*). (c) Rheological parameters of D. bulbifera starches: (i) storage modulus (G′), (ii) damping factor (tan δ), (iii) complex viscosity (ƞ*).
Gels 10 00051 g004aGels 10 00051 g004bGels 10 00051 g004cGels 10 00051 g004d
Table 1. Chemical composition of yam starches.
Table 1. Chemical composition of yam starches.
* Species/Varieties** AmyloseMoisture Content% Crude Protein% Crude Fat% Total Ash
D. dumetorum17.08 ± 0.249.14 ± 0.35 b0.15 ± 0.00 a0.50 ± 0.00 a0.19 ± 0.01 b
D. alata
TDa 92-222.53 ± 0.01 b14.06 ± 0.01 b0.07 ± 0.00 b0.00 ± 0.00 c0.17 ± 0.00 d
TDa 01/0001226.02 ± 1.40 a13.37 ± 0.03 d0.07 ± 0.00 b0.30 ± 0.02 a0.30 ± 0.01 a
TDa 29723.60 ± 0.28 ab14.17 ± 0.03 a0.08 ± 0.00 a0.00 ± 0.00 c0.23 ± 0.00 c
TDa 29124.75 ± 0.40 ab12.34 ± 0.04 e0.07 ± 0.00 b0.00 ± 0.00 c0.24 ± 0.00 b
TDa 93-3625.31 ± 1.58 a13.58 ± 0.03 c0.07 ± 0.01 b0.15 ± 0.02 b0.17 ± 0.00 d
Mean24.44 ± 1.49 a13.50 ± 0.73 a0.07 ± 0.00 b0.09 ± 0.13 b0.22 ± 0.05 ab
D. bulbifera
TDb 306912.02 ± 0.01 d0.07 ± 0.00 c0.00 ± 0.00 c0.25 ± 0.00 d12.02 ± 0.01 d
TDb 308412.42 ± 0.02 c0.08 ± 0.00 b0.00 ± 0.00 c0.31 ± 0.00 a12.42 ± 0.02 c
TDb 304813.72 ± 0.01 a0.09 ± 0.01 a0.07 ± 0.00 b0.26 ± 0.00 c13.72 ± 0.01 a
TDb 388413.63 ± 0.03 b0.06 ± 0.00 d0.55 ± 0.01 a0.25 ± 0.00 d13.63 ± 0.03 b
TDb 305911.98 ± 0.01 e0.06 ± 0.00 d0.00 ± 0.00 c0.30 ± 0.00 b11.98 ± 0.01 e
Mean12.75 ± 0.86 a0.07 ± 0.01 b0.12 ± 0.24 b0.27 ± 0.03 a12.75 ± 0.86 a
D. rotundata
TDr 99-1510.87 ± 0.03 e0.08 ± 0.00 b0.03 ± 0.01 a0.33 ± 0.00 a10.87 ± 0.03 e
TDr 89/0266516.58 ± 0.02 a0.07 ± 0.00 c0.02 ± 0.00 b0.32 ± 0.00 b16.58 ± 0.02 a
TDr 93-3113.74 ± 0.02 d0.06 ± 0.01 d0.00 ± 0.00 c0.21 ± 0.01 e13.74 ± 0.02 d
Baidza15.00 ± 0.04 c0.06 ± 0.01 d0.00 ± 0.00 c0.27 ± 0.00 c15.00 ± 0.04 c
TDr Amula16.20 ± 0.03 b0.09 ± 0.00 a0.00 ± 0.00 c0.26 ± 0.00 d16.20 ± 0.03 b
Mean14.48 ± 2.30 a0.07 ± 0.01 b0.01 ± 0.01 b0.28 ± 0.05 a14.48 ± 2.30 a
* Mean (±standard deviation) of triplicate analysis. ** Means with same letters in the same column are not significantly different (p > 0.05) at 5% level of significance. TDr—Tropical dioscorea rotundata, TDa—Tropical dioscorea alata, TDb—Tropical dioscorea bulbifera, TDd—Tropical dioscorea dumetorum.
Table 2. Thermal properties of yam starches.
Table 2. Thermal properties of yam starches.
Species
(Varieties)		* To (°C)Tp (°C)Tc (°C)R (Tc − To) °CΔH (J/g)
D. dumetorum76.80 ± 0.1981.400 ± 0.8185.86 ± 0.339.07 ± 0.1317.41 ± 0.77
D. alata
TDa 92-276.64 ± 0.45 a79.84 ± 0.23 a83.33 ± 0.35 a6.69 ± 0.10 b17.67 ± 2.67 a
TDa 01/0001275.40 ± 0.12 b78.42 ± 0.12 b81.56 ± 0.16 b6.16 ± 0.04 b18.71 ± 0.53 a
TDa 29770.92 ± 0.21 d79.57 ± 0.37 a79.64 ± 0.45 c8.72 ± 0.25 a15.69 ± 0.35 a
TDa 29173.39 ± 0.26 c78.00 ± 0.24 b82.82 ± 0.50 a9.43 ± 0.24 a16.36 ± 0.69 a
TDa 93-3671.97 ± 0.74 d76.75 ± 0.11 c81.79 ± 0.25 b9.82 ± 0.98 a17.31 ± 1.63 a
** Mean73.66 ± 2.2478.51 ± 1.1981.83 ± 1.378.17 ± 1.5917.15 ±
D. bulbifera
TDb 306973.89 ± 0.01 a79.17 ± 0.00 b84.24 ± 0.24 a10.35 ± 0.23 a16.23 ± 0.34 a
TDb 308473.90 ± 0.52 a79.42 ± 0.35 ab83.82 ± 0.53 a9.92 ± 0.01 a16.87 ± 1.42 a
TDb 304876.66 ± 3.46 a79.09 ± 0.12 b82.60 ± 0.16 b5.94 ± 3.36 a17.58 ± 0.19 a
TDb 388477.60 ± 3.18 a79.92 ± 0.12 a83.77 ± 0.14 a6.17 ± 3.32 a16.19 ± 0.68 a
TDb 305976.93 ± 3.90 a79.50 ± 0.24 ab83.64 ± 0.22 a6.71 ± 3.68 a14.76 ± 2.13 a
Mean75.80 ± 2.6479.42 ± 0.3483.61 ± 0.617.82 ± 2.8816.33 ± 1.32
D. rotundata
TDr 99-1572.97 ± 0.04 a77.00 ± 0.47 a82.26 ± 0.10 a9.30 ± 0.06 a17.47 ± 0.76 a
TDr 89/0266570.82 ± 0.02 d75.42 ± 0.12 a80.07 ± 0.08 c9.25 ± 0.06 a17.66 ± 0.23 a
TDr 93-3171.91 ± 0.11 b76.25 ± 0.11 a80.99 ± 0.12 b9.08 ± 0.23 a18.40 ± 0.06 a
Baidza71.46 ± 0.32 c77.42 ± 3.18 a78.95 ± 0.49 d7.50 ± 0.18 c17.68 ± 0.84 a
TDr Amula71.37 ± 0.01 c75.50 ± 0.24 a79.54 ± 0.21 cd8.18 ± 0.22 b17.13 ± 0.57 a
Mean71.70 ± 0.7776.32 ± 1.3680.36 ± 1.248.66 ± 0.7617.67 ± 0.61
* To: onset gelatinization temperature, Tp: peak gelatinization temperature, Tc: end gelatinization temperature, ΔH enthalpy of gelatinization. ** Mean values of varieties for each species in the same column are different significantly.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Otegbayo, B.O.; Tanimola, A.R.; Ricci, J.; Gibert, O. Thermal Properties and Dynamic Rheological Characterization of Dioscorea Starch Gels. Gels 2024, 10, 51. https://doi.org/10.3390/gels10010051

AMA Style

Otegbayo BO, Tanimola AR, Ricci J, Gibert O. Thermal Properties and Dynamic Rheological Characterization of Dioscorea Starch Gels. Gels. 2024; 10(1):51. https://doi.org/10.3390/gels10010051

Chicago/Turabian Style

Otegbayo, Bolanle Omolara, Abiola Rebecca Tanimola, Julien Ricci, and Olivier Gibert. 2024. "Thermal Properties and Dynamic Rheological Characterization of Dioscorea Starch Gels" Gels 10, no. 1: 51. https://doi.org/10.3390/gels10010051

APA Style

Otegbayo, B. O., Tanimola, A. R., Ricci, J., & Gibert, O. (2024). Thermal Properties and Dynamic Rheological Characterization of Dioscorea Starch Gels. Gels, 10(1), 51. https://doi.org/10.3390/gels10010051

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop