Gels | December 2022 - Browse Articles

13 pages, 3074 KiB

Open AccessArticle

Preparation of an LZ-OEO Compound Antibacterial Gel and the Effect of Microwave Treatment on Its Structure and Stability

by Shuaishuai Wei, Ying Gao, Lulu Ma, Zhan Wang, Xin Liu, Ying Liu, Mengzhen Zhong, Shijian Dong and Shugang Li

Gels 2022, 8(12), 838; https://doi.org/10.3390/gels8120838 - 19 Dec 2022

Viewed by 2009

Abstract

Composite gels prepared with ovalbumin (OVA) as basic materials have been gradually utilized in food and biological fields. However, the structure and function of gels made from natural materials are not perfect, especially the hardness, viscoelasticity and water-holding capacity of gels, which are [...] Read more.

Composite gels prepared with ovalbumin (OVA) as basic materials have been gradually utilized in food and biological fields. However, the structure and function of gels made from natural materials are not perfect, especially the hardness, viscoelasticity and water-holding capacity of gels, which are easily affected by various factors (pH, NaCl, etc.). In order to improve the antibacterial effect and safety of gels, and on the basis of exploring the bacteriostatic formula of lysozyme-oregano essential oil (LZ-OEO), the influence of microwave treatment on the stability of the composite bacteriostatic material gel was emphatically investigated and discussed so as to develop a new bacteriostatic gel material. The results revealed that the LZ-OEO antibacterial gel prepared by adding 20% OEO, with a ratio of 3:2 between OVA and LZ, was more stable after microwave treatment, and the synergistic antibacterial effect was significantly improved. That is, the OVA and LZ-OEO composite gel processed using a 350 W microwave treatment for 1 min had the highest hardness, the water-holding capacity reached 78.05% and a dense and ordered network structure was formed. In addition, the compound gel displayed excellent antibacterial effects against Staphylococcus aureus and Escherichia coli. The experimental findings in this study effectively expands the application scope of lysozyme antibacterial materials and provides a more favorable technical foundation for future development and utilization. Full article

(This article belongs to the Special Issue Gels Applications on Food Industry)

► Show Figures

Figure 1

12 pages, 4431 KiB

Open AccessArticle

Identification of the Collagen Types Essential for Mammalian Breast Acinar Structures

by Chandler R. Keller, Kelsey F. Ruud, Steve R. Martinez and Weimin Li

Gels 2022, 8(12), 837; https://doi.org/10.3390/gels8120837 - 18 Dec 2022

Cited by 3 | Viewed by 2730

Abstract

Modeling human breast tissue architecture is essential to study the pathophysiological conditions of the breast. We report that normal mammary epithelial cells grown in human breast extracellular matrix (ECM) hydrogel formed acini structurally similar to those of human and pig mammary tissues. Type [...] Read more.

Modeling human breast tissue architecture is essential to study the pathophysiological conditions of the breast. We report that normal mammary epithelial cells grown in human breast extracellular matrix (ECM) hydrogel formed acini structurally similar to those of human and pig mammary tissues. Type I, II, III and V collagens were commonly identified in human, pig, and mouse breast ECM. Mammary epithelial cells formed acini on certain types or combinations of the four collagens at normal levels of breast tissue elasticity. Comparison of the collagen species in mouse normal breast and breast tumor ECM revealed common and distinct sets of collagens within the two types of tissues. Elevated expression of collagen type I alpha 1 chain (Col1a1) was found in mouse and human breast cancers. Collagen type XXV alpha 1 chain (Col25a1) was identified in mouse breast tumors but not in normal breast tissues. Our data provide strategies for modeling human breast pathophysiological structures and functions using native tissue-derived hydrogels and offer insight into the potential contributions of different collagen types in breast cancer development. Full article

(This article belongs to the Special Issue Cancer Cell Biology in Biological Hydrogel)

► Show Figures

Graphical abstract

16 pages, 1084 KiB

Open AccessArticle

Effects of Salinity on Abiotic Aggregation of Organic Matter and Subsequent Microbial Responses

by Tzong-Yueh Chen and Annelie Skoog

Gels 2022, 8(12), 836; https://doi.org/10.3390/gels8120836 - 18 Dec 2022

Viewed by 1328

Abstract

Studies of marine aggregation have focused on determining formation rates of larger particles from small particles. However, it has been shown that particles can form from the dissolved phase, which includes colloidal material. The purpose of this study was to investigate the effect [...] Read more.

Studies of marine aggregation have focused on determining formation rates of larger particles from small particles. However, it has been shown that particles can form from the dissolved phase, which includes colloidal material. The purpose of this study was to investigate the effect of aggregation on the chemical composition of both the dissolved and particulate phases in two salinity regimes: (1) the coast of Avery Point, Connecticut, USA (AP; salinity of 30.1 psu); (2) the estuary of Thames River, Connecticut, USA (TR; salinity of 5.0 psu). The samples were incubated on a roller table for two days in the dark at a speed of 8 rpm. The mixed collision mechanism of shear and differential sedimentation provided by the roller table enhanced the gross aggregation of particulate organic carbon (POC; 0.75 µM d⁻¹ and 1.04 µM d⁻¹ in AP and TR, respectively). Subsequent microbial degradation led to a negative net aggregation of POC (−5.20 µM d⁻¹ and −1.19 µM d⁻¹ in AP and TR, respectively). Although bacterial abundance remained in a narrow range in this study, the aggregation of organic matter (OM) enhanced planktonic community respiration (CR; CR increased 5.1 mg-C m⁻³ d⁻¹ and 205.4 mg-C m⁻³ d⁻¹ in AP and TR, respectively). The collision also led to a gross aggregation of uncharacterized particulate organic matter (POM) transferred from uncharacterized dissolved organic matter (DOM; 0.62 µM-C d⁻¹ and 0.56 µM-C d⁻¹ in AP and TR, respectively). The aggregated, uncharacterized POM could be biologically refractory. The C- and N-yields and enrichment factor (EF) analysis indicated that the organic substrate dynamics in this study were complicated. Full article

(This article belongs to the Special Issue Advanced Research of Aquatic Gels and Their Applications)

► Show Figures

Figure 1

2 pages, 191 KiB

Open AccessEditorial

Editorial on the Special Issue “Advances in Nanogels”

by Chien-Chi Lin, Emanuele Mauri and Filippo Rossi

Gels 2022, 8(12), 835; https://doi.org/10.3390/gels8120835 - 17 Dec 2022

Viewed by 1173

Abstract

In recent decades, the rise of nanotechnology has led to the design of innovative nano-biomaterials which are used to improve pharmacological therapies and assist with disease diagnosis [...] Full article

(This article belongs to the Special Issue Advances in Nanogels)

17 pages, 3384 KiB

Open AccessReview

Pectin Based Hydrogels for Drug Delivery Applications: A Mini Review

by Sung Soo Han, Seong Min Ji, Min Jung Park, Maduru Suneetha and Uluvangada Thammaiah Uthappa

Gels 2022, 8(12), 834; https://doi.org/10.3390/gels8120834 - 17 Dec 2022

Cited by 21 | Viewed by 4410

Abstract

Over the past few decades, hydrogel systems using natural polymers have been expansively employed in drug delivery applications. Among the various reported biopolymer-based hydrogel drug delivery systems, pectin (Pec) is an exceptional natural polymer due to its unique functionalities and excellent properties such [...] Read more.

Over the past few decades, hydrogel systems using natural polymers have been expansively employed in drug delivery applications. Among the various reported biopolymer-based hydrogel drug delivery systems, pectin (Pec) is an exceptional natural polymer due to its unique functionalities and excellent properties such as biocompatibility, biodegradability, low-cost, and simple gelling capability, which has received considerable interest in the drug delivery fields. Since there is an increasing need for biomaterials with unique properties for drug delivery applications, in this review, hydrogels fabricated from natural pectin polymers were thoroughly investigated. Additionally, the present mini review aims to bring collectively more concise ways such as sources, extraction, properties, and various forms of Pec based hydrogel drug delivery systems and their toxicity concerns are summarized. Finally, the potential objectives and challenges based on pectin-based hydrogel drug delivery systems are also discussed. Full article

(This article belongs to the Special Issue Design and Optimization of Pharmaceutical Gels)

► Show Figures

Figure 1

21 pages, 3373 KiB

Open AccessArticle

Methacrylated Silk Fibroin Additive Manufacturing of Shape Memory Constructs with Possible Application in Bone Regeneration

by Alessio Bucciarelli, Mauro Petretta, Brunella Grigolo, Laura Gambari, Alessandra Maria Bossi, Francesco Grassi and Devid Maniglio

Gels 2022, 8(12), 833; https://doi.org/10.3390/gels8120833 - 16 Dec 2022

Cited by 9 | Viewed by 3139

Abstract

Methacrylated silk (Sil-MA) is a chemically modified silk fibroin specifically designed to be crosslinkable under UV light, which makes this material applicable in additive manufacturing techniques and allows the prototyping and development of patient-specific 2D or 3D constructs. In this study, we produced [...] Read more.

Methacrylated silk (Sil-MA) is a chemically modified silk fibroin specifically designed to be crosslinkable under UV light, which makes this material applicable in additive manufacturing techniques and allows the prototyping and development of patient-specific 2D or 3D constructs. In this study, we produced a thin grid structure based on crosslinked Sil-MA that can be withdrawn and ejected and that can recover its shape after rehydration. A complete chemical and physical characterization of Sil-MA was first conducted. Additionally, we tested Sil-MA biocompatibility according to the International Standard Organization protocols (ISO 10993) ensuring the possibility of using it in future trials. Sil-MA was also tested to verify its ability to support osteogenesis. Overall, Sil-MA was shown to be biocompatible and osteoconductive. Finally, two different additive manufacturing technologies, a Digital Light Processing (DLP) UV projector and a pneumatic extrusion technique, were used to develop a Sil-MA grid construct. A proof-of-concept of its shape-memory property was provided. Together, our data support the hypothesis that Sil-MA grid constructs can be injectable and applicable in bone regeneration applications. Full article

(This article belongs to the Special Issue Hydrogels for Bone Regeneration)

► Show Figures

Figure 1

15 pages, 7365 KiB

Open AccessArticle

A Thermal-Responsive Zwitterionic Polymer Gel as a Filtrate Reducer for Water-Based Drilling Fluids

by Kaihe Lv, Hongyan Du, Jinsheng Sun, Xianbin Huang and Haokun Shen

Gels 2022, 8(12), 832; https://doi.org/10.3390/gels8120832 - 16 Dec 2022

Cited by 10 | Viewed by 2506

Abstract

It is crucial to address the performance deterioration of water-based drilling fluids (WDFs) in situations of excessive salinity and high temperature while extracting deep oil and gas deposits. The focus of research in the area of drilling fluid has always been on filter [...] Read more.

It is crucial to address the performance deterioration of water-based drilling fluids (WDFs) in situations of excessive salinity and high temperature while extracting deep oil and gas deposits. The focus of research in the area of drilling fluid has always been on filter reducers that are temperature and salt resistant. In this study, a copolymer gel (PAND) was synthesized using acrylamide, N-isopropyl acrylamide, and 3-dimethyl (methacryloyloxyethyl) ammonium propane sulfonate through free-radical polymerization. The copolymer gel was then studied using FTIR, NMR, TGA, and element analysis. The PAND solution demonstrated temperature and salt stimulus response characteristics on rheology because of the hydrophobic association effect of temperature-sensitive monomers and the anti-polyelectrolyte action of zwitterionic monomers. Even in conditions with high temperatures (180 °C) and high salinities (30 wt% NaCl solution), the water-based drilling fluid with 1 wt% PAND displayed exceptional rheological and filtration properties. Zeta potential and scanning electron microscopy (SEM) were used to investigate the mechanism of filtration reduction. The results indicated that PAND could enhance bentonite particle colloidal stability, prevent bentonite particle aggregation, and form a compact mud cake, all of which are crucial for reducing the filtration volume of water-based drilling fluid. The PAND exhibit excellent potential for application in deep and ultra-deep drilling engineering, and this research may offer new thoughts on the use of zwitterionic polymer gel in the development of smart water-based drilling fluid. Full article

(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery)

► Show Figures

Graphical abstract

20 pages, 3850 KiB

Open AccessArticle

Incorporation of PEG Diacrylates (PEGDA) Generates Hybrid Fmoc-FF Hydrogel Matrices

by Elisabetta Rosa, Enrico Gallo, Teresa Sibillano, Cinzia Giannini, Serena Rizzuti, Eliana Gianolio, Pasqualina Liana Scognamiglio, Giancarlo Morelli, Antonella Accardo and Carlo Diaferia

Gels 2022, 8(12), 831; https://doi.org/10.3390/gels8120831 - 16 Dec 2022

Cited by 10 | Viewed by 3357

Abstract

Generated by a hierarchical and multiscale self-assembling phenomenon, peptide-based hydrogels (HGs) are soft materials useful for a variety of applications. Short and ultra-short peptides are intriguing building blocks for hydrogel fabrication. These matrices can also be obtained by mixing low-molecular-weight peptides with other [...] Read more.

Generated by a hierarchical and multiscale self-assembling phenomenon, peptide-based hydrogels (HGs) are soft materials useful for a variety of applications. Short and ultra-short peptides are intriguing building blocks for hydrogel fabrication. These matrices can also be obtained by mixing low-molecular-weight peptides with other chemical entities (e.g., polymers, other peptides). The combination of two or more constituents opens the door to the development of hybrid systems with tunable mechanical properties and unexpected biofunctionalities or morphologies. For this scope, the formulation, the multiscale analysis, and the supramolecular characterization of novel hybrid peptide-polymer hydrogels are herein described. The proposed matrices contain the Fmoc-FF (N^α-fluorenylmethyloxycarbonyl diphenylalanine) hydrogelator at a concentration of 0.5 wt% (5.0 mg/mL) and a diacrylate α-/ω-substituted polyethylene-glycol derivative (PEGDA). Two PEGDA derivatives, PEGDA 1 and PEGDA2 (mean molecular weights of 575 and 250 Da, respectively), are mixed with Fmoc-FF at different ratios (Fmoc-FF/PEGDA at 1/1, 1/2, 1/5, 1/10 mol/mol). All the multicomponent hybrid peptide-polymer hydrogels are scrutinized with a large panel of analytical techniques (including proton relaxometry, FTIR, WAXS, rheometry, and scanning electronic microscopy). The matrices were found to be able to generate mechanical responses in the 2–8 kPa range, producing a panel of tunable materials with the same chemical composition. The release of a model drug (Naphthol Yellow S) is reported too. The tunable features, the different topologies, and the versatility of the proposed materials open the door to the development of tools for different applicative areas, including diagnostics, liquid biopsies and responsive materials. The incorporation of a diacrylate function also suggests the possible development of interpenetrating networks upon cross-linking reactions. All the collected data allow a mutual comparison between the different matrices, thus confirming the significance of the hybrid peptide/polymer-based methodology as a strategy for the design of innovative materials. Full article

(This article belongs to the Special Issue Synthesis and Applications of Hydrogels)

► Show Figures

Figure 1

10 pages, 2021 KiB

Open AccessArticle

Decoupling between Translational Diffusion and Viscoelasticity in Transient Networks with Controlled Network Connectivity

by Takuya Katashima, Ryunosuke Kobayashi, Shohei Ishikawa, Mitsuru Naito, Kanjiro Miyata, Ung-il Chung and Takamasa Sakai

Gels 2022, 8(12), 830; https://doi.org/10.3390/gels8120830 - 16 Dec 2022

Cited by 4 | Viewed by 1839

Abstract

The mobility of sustained molecules is influenced by viscoelasticity, which is strongly correlated with the diffusional property in polymeric liquid. However, the study of transient networks formed by a reversible crosslink, which is the viscoelastic liquid, was insufficient due to the absence of [...] Read more.

The mobility of sustained molecules is influenced by viscoelasticity, which is strongly correlated with the diffusional property in polymeric liquid. However, the study of transient networks formed by a reversible crosslink, which is the viscoelastic liquid, was insufficient due to the absence of a model system. We compare the viscoelastic and diffusional properties of the transient networks, using the model system with controlled network connectivity (Tetra-PEG slime). According to independent measurements of viscoelasticity and diffusion, the root-mean-square distance the polymer diffuses during the viscoelastic relaxation time shows a large deviation from the self-size of the polymer, which is contrary to the conventional understanding. This decoupling between viscoelasticity and diffusion is unique for transient networks, suggesting that the viscoelastic relaxation is not induced by the diffusion of one prepolymer, particularly in the network with low connectivity. These findings will provide a definite basis for discussion to understand the viscoelasticity in transient networks. Full article

(This article belongs to the Special Issue Advanced Hydrogels for Controlled Drug Delivery)

► Show Figures

Figure 1

20 pages, 1935 KiB

Open AccessReview

Current Advances in 3D Dynamic Cell Culture Systems

by Xin Huang, Zhengxiang Huang, Weidong Gao, Wendong Gao, Ruiying He, Yulin Li, Ross Crawford, Yinghong Zhou, Lan Xiao and Yin Xiao

Gels 2022, 8(12), 829; https://doi.org/10.3390/gels8120829 - 16 Dec 2022

Cited by 23 | Viewed by 5576

Abstract

The traditional two-dimensional (2D) cell culture methods have a long history of mimicking in vivo cell growth. However, these methods cannot fully represent physiological conditions, which lack two major indexes of the in vivo environment; one is a three-dimensional 3D cell environment, and [...] Read more.

The traditional two-dimensional (2D) cell culture methods have a long history of mimicking in vivo cell growth. However, these methods cannot fully represent physiological conditions, which lack two major indexes of the in vivo environment; one is a three-dimensional 3D cell environment, and the other is mechanical stimulation; therefore, they are incapable of replicating the essential cellular communications between cell to cell, cell to the extracellular matrix, and cellular responses to dynamic mechanical stimulation in a physiological condition of body movement and blood flow. To solve these problems and challenges, 3D cell carriers have been gradually developed to provide a 3D matrix-like structure for cell attachment, proliferation, differentiation, and communication in static and dynamic culture conditions. 3D cell carriers in dynamic culture systems could primarily provide different mechanical stimulations which further mimic the real in vivo microenvironment. In this review, the current advances in 3D dynamic cell culture approaches have been introduced, with their advantages and disadvantages being discussed in comparison to traditional 2D cell culture in static conditions. Full article

(This article belongs to the Special Issue Gels in Medicine and Pharmacological Therapies)

► Show Figures

Figure 1

19 pages, 5585 KiB

Open AccessArticle

A Power Compensation Strategy for Achieving Homogeneous Microstructures for 4D Printing Shape-Adaptive PNIPAM Hydrogels: Out-of-Plane Variations

by Liyuan Tan, Hyunjin Lee, Li Fang and David J. Cappelleri

Gels 2022, 8(12), 828; https://doi.org/10.3390/gels8120828 - 15 Dec 2022

Cited by 4 | Viewed by 1899

Abstract

In the last decade, 3D printing has attracted significant attention and has resulted in benefits to many research areas. Advances in 3D printing with smart materials at the microscale, such as hydrogels and liquid crystalline polymers, have enabled 4D printing and various applications [...] Read more.

In the last decade, 3D printing has attracted significant attention and has resulted in benefits to many research areas. Advances in 3D printing with smart materials at the microscale, such as hydrogels and liquid crystalline polymers, have enabled 4D printing and various applications in microrobots, micro-actuators, and tissue engineering. However, the material absorption of the laser power and the aberrations of the laser light spot will introduce a decay in the polymerization degree along the height direction, and the solution to this problem has not been reported yet. In this paper, a compensation strategy for the laser power is proposed to achieve homogeneous and high aspect ratio hydrogel structures at the microscale along the out-of-plane direction. Linear approximations for the power decay curve are adopted for height steps, discretizing the final high aspect ratio structures. The strategy is achieved experimentally with hydrogel structures fabricated by two-photon polymerization. Moreover, characterizations have been conducted to verify the homogeneity of the printed microstructures. Finally, the saturation of material property is investigated by an indirect 3D deformation method. The proposed strategy is proved to be effective and can be explored for other hydrogel materials showing significant deformation. Furthermore, the strategy for out-of-plane variations provides a critical technique to achieve 4D-printed homogeneous shape-adaptive hydrogels for further applications. Full article

(This article belongs to the Special Issue 3D Printing of Gels: Applications and Properties)

► Show Figures

Figure 1

21 pages, 58130 KiB

Open AccessArticle

Concentration Dependent Effect of Quaternary Amines on the Adhesion of U251-MG Cells

by Nils Stamm, Kristin Glotzbach, Andreas Faissner and Ralf Weberskirch

Gels 2022, 8(12), 827; https://doi.org/10.3390/gels8120827 - 15 Dec 2022

Cited by 2 | Viewed by 1602

Abstract

Cationic gels have seen increasing interest in recent years for 2D cell cultivation since they may represent an alternative to the well-known RGD-peptide motif functionalized gels. However, few hydrogel systems with adjustable cationic strength have been fabricated and investigated so far. In this [...] Read more.

Cationic gels have seen increasing interest in recent years for 2D cell cultivation since they may represent an alternative to the well-known RGD-peptide motif functionalized gels. However, few hydrogel systems with adjustable cationic strength have been fabricated and investigated so far. In this work, eight gels with defined concentrations of cationic groups, two of which also contained the RGD peptide, were prepared from three well-defined, soluble precursor copolymers with thiol-functionalities and PEGDA3500 as a crosslinker via thiol-ene chemistry. Live/dead stainings of U-251-MG cells on the hydrogels with different concentrations of the cationic motif were made after 3 days and 7 days of cultivation. The results show a high dependence of the number of adhesive cells and their morphology, cluster versus spread cells, on the concentration of cationic groups in the gel. This effect was more pronounced when the gels were not further dialyzed before usage. In addition, a synergistic effect of the two motifs, cationic group and RGD peptide, could be demonstrated, which together induce stronger cell adhesion than either motif alone. Full article

(This article belongs to the Special Issue Biofunctional Gels)

► Show Figures

Figure 1

16 pages, 4194 KiB

Open AccessArticle

Investigation on Filtration Control of Zwitterionic Polymer AADN in High Temperature High Pressure Water-Based Drilling Fluids

by Ren Wang, Jie Yang, Luman Liu, Jianlong Wang, Zhenbo Feng, Die Zhang, Shan Gao, Jiao Wang, Han Ren and Baotong Hui

Gels 2022, 8(12), 826; https://doi.org/10.3390/gels8120826 - 14 Dec 2022

Cited by 5 | Viewed by 2618

Abstract

With the exploration and development of high-temperature and high-salt deep oil and gas, more rigorous requirements are warranted for the performance of water-based drilling fluids (WBDFs). In this study, acrylamide, 2-acrylamide-2-methylpropanesulfonic acid, diallyl dimethyl ammonium chloride, and N-vinylpyrrolidone were synthesized by free radical [...] Read more.

With the exploration and development of high-temperature and high-salt deep oil and gas, more rigorous requirements are warranted for the performance of water-based drilling fluids (WBDFs). In this study, acrylamide, 2-acrylamide-2-methylpropanesulfonic acid, diallyl dimethyl ammonium chloride, and N-vinylpyrrolidone were synthesized by free radical copolymerization in an aqueous solution to form a temperature and salt-resistant zwitterionic polymer gel filtration loss reducer (AADN). The zwitterionic polymer had excellent adsorption and hydration groups, which could effectively combine with bentonite through hydrogen bonds and electrostatic attraction, strengthening the hydration film thickness on the surface of bentonite, and promoting the stable dispersion of drilling fluid. In addition, the reverse polyelectrolyte effect of zwitterionic polymers strengthened the drilling fluid’s ability to resist high-temperature and high-salt. The AADN-based drilling fluid showed excellent rheological and filtration control properties (FL_API < 8 mL, FL_HTHP < 29.6 mL) even after aging at high-temperature (200 °C) and high-salt (20 wt% NaCl) conditions. This study provides a new strategy for simultaneously improving the high-temperature and high-salt tolerance of WBDFs, presenting the potential for application in drilling in high-temperature and high-salt deep formations. Full article

(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery)

► Show Figures

Graphical abstract

14 pages, 5918 KiB

Open AccessArticle

Development of Growth Factor Releasing Hyaluronic Acid-Based Hydrogel for Pulp Regeneration: A Preliminary Study

by Mi Sun Kim, Yu-Shik Hwang, Hyo-Seol Lee, Ok Hyung Nam and Sung Chul Choi

Gels 2022, 8(12), 825; https://doi.org/10.3390/gels8120825 - 13 Dec 2022

Cited by 3 | Viewed by 2289

Abstract

Growth factors play essential roles as signaling molecules in pulp regeneration. We investigated the effect of a hyaluronic acid (HA)-collagen hybrid hydrogel with controlled release of fibroblast growth factor (FGF)-2 and platelet-derived growth factor (PDGF)-BB on human pulp regeneration. The cell interaction and [...] Read more.

Growth factors play essential roles as signaling molecules in pulp regeneration. We investigated the effect of a hyaluronic acid (HA)-collagen hybrid hydrogel with controlled release of fibroblast growth factor (FGF)-2 and platelet-derived growth factor (PDGF)-BB on human pulp regeneration. The cell interaction and cytotoxicity of the HA-collagen hybrid hydrogel, the release kinetics of each growth factor, and the effects of the released growth factors on pulp cell proliferation were examined. The vitality of pulp cells was maintained. The amounts of FGF-2 and PDGF-BB released over 7 days were 68% and 50%, respectively. Groups with a different concentration of growth factor (FGF-2: 100, 200, 500, and 1000 ng/mL; PDGF-BB: 10, 50, 100, 200, and 500 ng/mL) were experimented on days 1, 3, 5, and 7. Considering FGF-2 concentration, significantly increased pulp cell proliferation was observed on days 1, 3, 5, and 7 in the 100 ng/mL group and on days 3, 5, and 7 in the 200 ng/mL group. In the case of PDGF-BB concentration, significantly increased pulp cell proliferation was observed at all four time points in the 100 ng/mL group and on days 3, 5, and 7 in the 50, 200, and 500 ng/mL groups. This indicates that the optimal concentration of FGF-2 and PDGF-BB for pulp cell proliferation was 100 ng/mL and that the HA-collagen hybrid hydrogel has potential as a controlled release delivery system for FGF-2 and PDGF-BB. Full article

(This article belongs to the Special Issue Modification of Hydrogels and Their Applications in Biomedical Engineering)

► Show Figures

Graphical abstract

18 pages, 4082 KiB

Open AccessArticle

Temperature/pH-Sensitive Double Cross-Linked Hydrogels as Platform for Controlled Delivery of Metoclopramide

by Bogdan-Paul Coșman, Sanda-Maria Bucătariu, Marieta Constantin and Gheorghe Fundueanu

Gels 2022, 8(12), 824; https://doi.org/10.3390/gels8120824 - 13 Dec 2022

Cited by 4 | Viewed by 2130

Abstract

Novel double cross-linked (DC) hydrogels with pH-/temperature-sensitive properties were designed and developed. Therefore, linear pH-sensitive poly(methyl vinyl ether-alt-maleic acid) (P(VME/MA)) macromolecules were absorbed within a thermosensitive poly(N-isopropylacrylamide-co-hydroxyethylacrylamide)-hydrogel (PNH) and, subsequently, cross-linked together through a solvent-free thermal method. As a novelty, double [...] Read more.

Novel double cross-linked (DC) hydrogels with pH-/temperature-sensitive properties were designed and developed. Therefore, linear pH-sensitive poly(methyl vinyl ether-alt-maleic acid) (P(VME/MA)) macromolecules were absorbed within a thermosensitive poly(N-isopropylacrylamide-co-hydroxyethylacrylamide)-hydrogel (PNH) and, subsequently, cross-linked together through a solvent-free thermal method. As a novelty, double cross-linked hydrogels were obtained from previously purified polymers in the absence of any solvent or cross-linking agent, which are generally harmful for the body. The new DC structures were characterized by FT–IR spectroscopy, SEM, swelling kinetic measurements, and mechanical tests. The resulting scaffolds exhibited interconnected pores and a flexible pattern, compared to the brittle structure of conventional PNH. The swelling kinetics of DC hydrogels were deeply affected by temperature (25 and 37 °C) and pH (7.4 and 1.2). Furthermore, the hydrogels absorbed a great amount of water in a basic environment and displayed improved mechanical properties. Metoclopramide (Met) was loaded within DC hydrogels as a model drug to investigate the ability of the support to control the drug release rate. The results obtained recommended them as convenient platforms for the oral administration of drugs, with the release of the largest part of the active principle occurring in the colon. Full article

(This article belongs to the Special Issue Smart Hydrogels: Application in Tissue Engineering)

► Show Figures

Figure 1

23 pages, 5368 KiB

Open AccessArticle

Kiwi Fruits Preservation Using Novel Edible Active Coatings Based on Rich Thymol Halloysite Nanostructures and Chitosan/Polyvinyl Alcohol Gels

by Constantinos E. Salmas, Aris E. Giannakas, Dimitrios Moschovas, Eleni Kollia, Stavros Georgopoulos, Christina Gioti, Areti Leontiou, Apostolos Avgeropoulos, Anna Kopsacheili, Learda Avdylaj and Charalampos Proestos

Gels 2022, 8(12), 823; https://doi.org/10.3390/gels8120823 - 13 Dec 2022

Cited by 16 | Viewed by 3365

Abstract

The concept of this study is the replacement of previous fossil-based techniques for food packaging and food shelf-life extension, with novel more green processes and materials following the spirit of circular economy and the global trend for environmentally positive fingerprints. A novel adsorption [...] Read more.

The concept of this study is the replacement of previous fossil-based techniques for food packaging and food shelf-life extension, with novel more green processes and materials following the spirit of circular economy and the global trend for environmentally positive fingerprints. A novel adsorption process to produce thymol-halloysite nanohybrids is presented in this work. The high dispersion of this thymol-halloysite nanostructure in chitosan biopolymer is one of the goals of this study. The incorporation of this biodegradable matrix with poly-vinyl-alcohol produced a very promising food-packaging film. Mechanical, water-oxygen barrier, antimicrobial, and antioxidant properties were measured. Transparency levels were also tested using a UV-vis instrument. Moreover, the developed films were tested in-vivo for the preservation and the extension of the shelf-life of kiwi fruits. In all cases, results indicated that the increased fraction of thymol from thyme oil significantly enhances the antimicrobial and antioxidant activity of the prepared chitosan-poly-vinyl- alcohol gel. The use of the halloysite increases the mechanical and water-oxygen barrier properties and leads to a control release process of thymol which extends the preservation and the shelf-life of kiwi fruits. Finally, the results indicated that the halloysite improves the properties of the chitosan/poly-vinyl-alcohol films, and the thymol makes them further advantageous. Full article

(This article belongs to the Special Issue Bioactive Gel Films and Coatings Applied in Active Food Packaging)

► Show Figures

Figure 1

12 pages, 2954 KiB

Open AccessArticle

Effect of Pork Skin Gelatin on the Physical Properties of Pork Myofibrillar Protein Gel and Restructured Ham with Microbial Transglutaminase

by Chang Hoon Lee and Koo Bok Chin

Gels 2022, 8(12), 822; https://doi.org/10.3390/gels8120822 - 12 Dec 2022

Cited by 6 | Viewed by 2398

Abstract

The goal of this study was to determine the qualities of pork myofibrillar protein (MP) gels added with pork gelatin and transglutaminase (TGase), as well as their application to restructured ham (RH). MP mixtures were prepared with various levels of gelatin (0.5, 1.0, [...] Read more.

The goal of this study was to determine the qualities of pork myofibrillar protein (MP) gels added with pork gelatin and transglutaminase (TGase), as well as their application to restructured ham (RH). MP mixtures were prepared with various levels of gelatin (0.5, 1.0, and 1.5%. w/w) and TGase. In this study, cooking loss (CL), gel strength, shear stress, and the microstructure of MP with various levels of gelatin were evaluated. After RHs were manufactured with varying levels of gelatin and TGase, the physicochemical and textural properties were measured. The CL of the MP with 1% (w/w) of gelatin was decreased. Regardless of the presence of TGase, increased amounts of gelatin in the MP gels resulted in high shear stress. Shear values were higher in the RH with gelatin treatment than in the other treatments. In addition, the RHs with gelatin alone or combined with TGase had high water-holding capacity. The RH with the combination of gelatin and TGase had higher sensory attributes than the control. Gelatin improved the physical properties of the RHs and is recommended for application in various meat products. Full article

(This article belongs to the Special Issue Food Colloids：From Design to Application)

► Show Figures

Figure 1

22 pages, 4348 KiB

Open AccessArticle

Semi-Synthetic Click-Gelatin Hydrogels as Tunable Platforms for 3D Cancer Cell Culture

by Luke Hipwood, Julien Clegg, Angus Weekes, Jordan W. Davern, Tim R. Dargaville, Christoph Meinert and Nathalie Bock

Gels 2022, 8(12), 821; https://doi.org/10.3390/gels8120821 - 12 Dec 2022

Cited by 8 | Viewed by 3673

Abstract

Basement membrane extracts (BME) derived from Engelbreth–Holm–Swarm (EHS) mouse sarcomas such as Matrigel^® remain the gold standard extracellular matrix (ECM) for three-dimensional (3D) cell culture in cancer research. Yet, BMEs suffer from substantial batch-to-batch variation, ill-defined composition, and lack the ability for [...] Read more.

Basement membrane extracts (BME) derived from Engelbreth–Holm–Swarm (EHS) mouse sarcomas such as Matrigel^® remain the gold standard extracellular matrix (ECM) for three-dimensional (3D) cell culture in cancer research. Yet, BMEs suffer from substantial batch-to-batch variation, ill-defined composition, and lack the ability for physichochemical manipulation. Here, we developed a novel 3D cell culture system based on thiolated gelatin (Gel-SH), an inexpensive and highly controlled raw material capable of forming hydrogels with a high level of biophysical control and cell-instructive bioactivity. We demonstrate the successful thiolation of gelatin raw materials to enable rapid covalent crosslinking upon mixing with a synthetic poly(ethylene glycol) (PEG)-based crosslinker. The mechanical properties of the resulting gelatin-based hydrogels were readily tuned by varying precursor material concentrations, with Young’s moduli ranging from ~2.5 to 5.8 kPa. All hydrogels of varying stiffnesses supported the viability and proliferation of MDA-MB-231 and MCF-7 breast cancer cell lines for 14 and 21 days of cell culture, respectively. Additionally, the gelatin-based hydrogels supported the growth, viability, and osteogenic differentiation of patient-derived preosteoblasts over 28 days of culture. Collectively, our data demonstrate that gelatin-based biomaterials provide an inexpensive and tunable 3D cell culture platform that may overcome the limitations of traditional BMEs. Full article

(This article belongs to the Special Issue Polymer Hydrogels for Cancer Therapy)

► Show Figures

Figure 1

18 pages, 9576 KiB

Open AccessArticle

Xerogels Morphology Details by Multifractal Analysis and Scanning Electron Microscopy Images Evaluations of 5-Fluorouracil Release from Chitosan-Based Matrix

by Maria-Alexandra Paun, Mihai-Virgil Nichita, Vladimir-Alexandru Paun and Viorel-Puiu Paun

Gels 2022, 8(12), 820; https://doi.org/10.3390/gels8120820 - 12 Dec 2022

Cited by 5 | Viewed by 1430

Abstract

Four medicament delivery formulations based on 5-fluorouracil in a chitosan substantial matrix were realized in situ via 3,7-dimethyl-2,6-octadienal element hydrogelation. Representative samples of the final realized compounds were investigated from an analytic, constitutional, and morphological viewpoint via Fourier transform infrared (FTIR) spectroscopy and [...] Read more.

Four medicament delivery formulations based on 5-fluorouracil in a chitosan substantial matrix were realized in situ via 3,7-dimethyl-2,6-octadienal element hydrogelation. Representative samples of the final realized compounds were investigated from an analytic, constitutional, and morphological viewpoint via Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The SEM images of the formulations were investigated in concordance with fractal analysis, and the fractal dimensions and lacunarity were computed. The developed mathematical multifractal model is necessarily confirmed by the experimental measurements corresponding to the 5-fluorouracil release outside the chitosan-formed matrix. Full article

(This article belongs to the Special Issue Gels: Synthesis, Characterization and Applications in High Performance Chemistry)

► Show Figures

Figure 1

13 pages, 3312 KiB

Open AccessArticle

PEG Gels Significantly Improve the Storage Stability of Nucleic Acid Preparations

by Pengfei Cui, Luping Ma, Pengju Jiang, Cheng Wang and Jianhao Wang

Gels 2022, 8(12), 819; https://doi.org/10.3390/gels8120819 - 12 Dec 2022

Viewed by 1872

Abstract

Currently, nucleic acid preparations have gained much attention due to their unique working principle and application value. However, as macromolecular drugs, nucleic acid preparations have complex construction and poor stability. The current methods to promote stability face problems such as high cost and [...] Read more.

Currently, nucleic acid preparations have gained much attention due to their unique working principle and application value. However, as macromolecular drugs, nucleic acid preparations have complex construction and poor stability. The current methods to promote stability face problems such as high cost and inconvenient operatios. In this study, the hydrophilic pharmaceutical excipient PEG was used to gelate nucleic acid preparations to avoid the random movements of liquid particles. The results showed that PEG gelation significantly improved the stability of PEI25K−based and liposome−based nucleic acid preparations, compared with nucleic acid preparations without PEG gelation. After being stored at 4 °C for 3 days, non−PEG gelled nucleic acid preparations almost lost transfection activity, while PEGylated preparations still maintained high transfection efficiency. Fluorescence experiments showed that this effect was caused by inhibiting particle aggregation. The method described in this study was simple and effective, and the materials used had good biocompatibility. It is believed that this study will contribute to the better development of gene therapy drugs. Full article

(This article belongs to the Special Issue State-of-the-Art Hydrogel Research for Biomedical Applications)

► Show Figures

Graphical abstract

12 pages, 2372 KiB

Open AccessArticle

Phenol-Grafted Alginate Sulfate Hydrogel as an Injectable FGF-2 Carrier

by Ryota Goto, Masaki Nakahata and Shinji Sakai

Gels 2022, 8(12), 818; https://doi.org/10.3390/gels8120818 - 12 Dec 2022

Cited by 3 | Viewed by 2877

Abstract

In the field of tissue engineering, fibroblast growth factor-2 (FGF-2) effectively regenerates damaged tissue and restores its biological function. However, FGF-2 readily diffuses and degrades under physiological conditions. Therefore, methods for the sustained and localized delivery of FGF-2 are needed. Drug delivery systems [...] Read more.

In the field of tissue engineering, fibroblast growth factor-2 (FGF-2) effectively regenerates damaged tissue and restores its biological function. However, FGF-2 readily diffuses and degrades under physiological conditions. Therefore, methods for the sustained and localized delivery of FGF-2 are needed. Drug delivery systems using hydrogels as carriers have attracted significant interest. Injectable hydrogels with an affinity for FGF-2 are candidates for FGF-2 delivery systems. In this study, we fabricated a hydrogel from phenol-grafted alginate sulfate (AlgS-Ph) and investigated its application to the delivery of FGF-2. The hydrogel was prepared under mild conditions via horseradish peroxidase (HRP)-mediated cross-linking. Surface plasmon resonance (SPR) measurements show that the AlgS-Ph hydrogel has an affinity for FGF-2 in accordance with its degree of sulfation. Conditions for the preparation of the AlgS-Ph hydrogel, including HRP and H₂O₂ concentrations, are optimized so that the hydrogel can be used as an injectable drug carrier. The hydrogel shows no cytotoxicity when using 10T1/2 cells as a model cell line. The angiogenesis assay shows that FGF-2 released from the AlgS-Ph hydrogel promotes the formation of blood vessels. These results indicate that the AlgS-Ph hydrogel is a suitable candidate for the FGF-2 carrier. Full article

(This article belongs to the Special Issue Advanced Gels for Drug Delivery Systems Based on Sustainable Development Goals (SDGs))

► Show Figures

Figure 1

14 pages, 4181 KiB

Open AccessArticle

pH-Responsive, Thermo-Resistant Poly(Acrylic Acid)-g-Poly(boc-L-Lysine) Hydrogel with Shear-Induced Injectability

by Maria-Eleni Karga, Maria-Eleni Kargaki, Hermis Iatrou and Constantinos Tsitsilianis

Gels 2022, 8(12), 817; https://doi.org/10.3390/gels8120817 - 12 Dec 2022

Cited by 3 | Viewed by 2042

Abstract

In this study we report the rheological behavior of aqueous solutions of an amphiphilic graft copolymer constituting a polyacrylic acid (PAA) grafted by poly(boc-L-lysine), P(b-LL). Due to the highly hydrophobic nature of the grafted chains, the copolymer self-assembles spontaneously in aqueous media forming [...] Read more.

In this study we report the rheological behavior of aqueous solutions of an amphiphilic graft copolymer constituting a polyacrylic acid (PAA) grafted by poly(boc-L-lysine), P(b-LL). Due to the highly hydrophobic nature of the grafted chains, the copolymer self-assembles spontaneously in aqueous media forming three-dimensional (3D) finite size networks (microgels). The rheological analysis demonstrated that the copolymer behaves as a strong elastic hydrogel, showing characteristics of a “frozen” network. Moreover, it is noteworthy that the formulation shows the above-described characteristics in very small concentrations (0.25–1.20 wt%) compared to other naturally cross-linked hydrogels that have been studied so far. Concentration significantly affects the rheological properties of the hydrogel, showing considerable increase in elastic modulus, following the scaling law G’~C^1.93. At the same time, the hydrogels can be described as intelligent stimuli-responsive systems, showing pH and shear responsiveness as well as stability with temperature changes. Thanks to the pH dependance of the degree of ionization of the weak polyelectrolyte PAA backbone, stiffness and swelling of the hydrogels can be tuned effectively by adjusting the pH conditions. Simulating conditions such as those of injection through a 28-gauge syringe needle, the gel demonstrates excellent response to shear, due to its remarkable shear thinning behavior. The combination of pH-sensitivity and shear responsiveness leads to excellent injectability and self-healing properties, given that it flows easily upon applying a low stress and recovers instantly in the site of injection. Therefore, the physically cross-linked PAA-g-P(b-LL) hydrogel exhibits remarkable features, namely biocompatibility, biodegradability of cross-links, pH responsiveness, shear-induced injectability and instantaneous self-healing, making it a potential candidate for various biomedical applications. Full article

(This article belongs to the Special Issue Structure and Properties of Functional Hydrogels)

► Show Figures

Figure 1

22 pages, 2023 KiB

Open AccessReview

Recent Advances in Hydrogels for the Diagnosis and Treatment of Dry Eye Disease

by Qiaoqiao Li, Yifeng Cao and Ping Wang

Gels 2022, 8(12), 816; https://doi.org/10.3390/gels8120816 - 11 Dec 2022

Cited by 11 | Viewed by 8542

Abstract

Dry eye disease (DED) is the most common clinical ocular surface disease. Given its multifactorial etiology, no consensus has been reached on the diagnosis criteria for dry eye disease. Topical drug administration remains the mainstay of treatment but is limited to the rapid [...] Read more.

Dry eye disease (DED) is the most common clinical ocular surface disease. Given its multifactorial etiology, no consensus has been reached on the diagnosis criteria for dry eye disease. Topical drug administration remains the mainstay of treatment but is limited to the rapid clearance from the eye surface. To address these problems, hydrogel-based materials were designed to detect biomarkers or act as drug delivery systems by taking advantage of their good biocompatibility, excellent physical and mechanical properties, and long-term implant stability. Biosensors prepared using biocompatible hydrogels can be sensitive in diagnosing DED, and the designed hydrogels can also improve the drug bioavailability and retention time for more effective and long-term treatment. This review summarizes recent advances in the use of hydrogels for diagnosing and treating dry eye, aiming to provide a novel reference for the eventual clinical translation of hydrogels in the context of dry eye disease. Full article

(This article belongs to the Special Issue Advanced Hydrogels: Preparation, Property, and Biomedical Application)

► Show Figures

Figure 1

19 pages, 6864 KiB

Open AccessArticle

Development of Chincho (Tagetes elliptica Sm.) Essential Oil Organogel Nanoparticles through Ionic Gelation and Process Optimization with Box–Behnken Design

by Francis Cerrón-Mercado, Bettit K. Salva-Ruíz, Diana Nolazco-Cama, Clara Espinoza-Silva, Juana Fernández-López, Jose A. Pérez-Alvarez and Manuel Viuda-Martos

Gels 2022, 8(12), 815; https://doi.org/10.3390/gels8120815 - 11 Dec 2022

Cited by 2 | Viewed by 2205

Abstract

The aim of this work was to obtain chitosan nanoparticles (<1000 nm) with chincho (Tagetes elliptica Sp.) essential oil (CEO-CSNPs) using the ionic gelation method. A Box–Behnken design (BBD) was applied, using chitosan solution (CS) pH (4.0, 4.4, 4.8); the mass ratio [...] Read more.

The aim of this work was to obtain chitosan nanoparticles (<1000 nm) with chincho (Tagetes elliptica Sp.) essential oil (CEO-CSNPs) using the ionic gelation method. A Box–Behnken design (BBD) was applied, using chitosan solution (CS) pH (4.0, 4.4, 4.8); the mass ratio of CS/CEO (1:0.7, 1:0.85, 1:1.0) and the mass ratio of CS/CS-tripolyphosphate (1:0.46, 1:0.58, 1:0.7) as independent variables. The formulation-dependent variables, encapsulation efficiency (EE) and loading capacity (LC) of the CEO-CSNPs were evaluated. BBD determined that optimal conditions for CEO-CSNPs were pH: 4.4, CS/CEO mass ratio 1:0.7 and CS/TPP mass ratio 1:0.46. Once the optimization was defined, particle size (PS), zeta potential (ZP), polydispersity index (PDI), CEO-CSNPs morphological studies, in vitro CEO release, and antibacterial activity were determined. The CEO-CSNPs showed an EE of 52.64% and a LC of 11.56%, with a diameter of 458.5 nm, with a ZP of 23.30mV, and a PDI of 0.418. The SEM studies showed that the nanoparticles were rounded and had uniform shapes. In addition, CEO-CSNPs showed a minimum inhibitory concentration against Staphylococcus aureus, Salmonella infantis and Escherichia coli of 5.29, 10.57 and 10.57 µg/mL, respectively. These results could be very useful for the stabilization of chincho essential oil for food industry purposes. However, several studies about the release, as well as interaction with food matrices, will be necessary. Full article

(This article belongs to the Special Issue Recent Progress on Oleogels and Organogels)

► Show Figures

Figure 1

12 pages, 3523 KiB

Open AccessArticle

Viscoelastic Analysis of Pectin Hydrogels Regenerated from Citrus Pomelo Waste by Gelling Effects of Calcium Ion Crosslinking at Different pHs

by Tu Minh Tran Vo, Takaomi Kobayashi and Pranut Potiyaraj

Gels 2022, 8(12), 814; https://doi.org/10.3390/gels8120814 - 10 Dec 2022

Cited by 13 | Viewed by 2412

Abstract

Pectin was extracted from citrus pomelo waste, and the effects of calcium ions (Ca²⁺) on the gelation and hydrogels properties were investigated over a pH range of 3.2–8 by using viscoelastic analysis. The gelatinization of Ca²⁺-pectin was examined at [...] Read more.

Pectin was extracted from citrus pomelo waste, and the effects of calcium ions (Ca²⁺) on the gelation and hydrogels properties were investigated over a pH range of 3.2–8 by using viscoelastic analysis. The gelatinization of Ca²⁺-pectin was examined at concentrations of 0.9, 1.8, 2.4, and 3.6 M of Ca²⁺ in aqueous pectin solutions of 1%, 2%, 3%, and 4%. The gel transition of Ca²⁺-pectin solution to hydrogels was determined by measuring the storage modulus (G’) and loss modulus (G”) under mechanical strain from 0.01 to 100%. In a hydrogel of 3% pectin at Ca²⁺ = 2.4 M, as pH increased to 7, the G’ at 0.01 strain % was 3 × 10⁴ Pa, and 3 × 10³ Pa at pH 5, indicating that the crosslinking weakened at acidic pH. Due to the crosslinking between the calcium ions and the ionized carboxylic acid groups of pectin, the resulting hydrogel became stiff. When the mechanical strain % was in the range of 0.01–1%, G’ was unchanged and G” was an order of magnitude smaller than G’, indicating that the mechanical stress was relieved by the gel. In the range of 1–100%, the gel deformation progressed and both the moduli values were dropped. Collapse from the gel state to the solution state occurred at 1–10 strain %, but the softer hydrogels with G’ of 10³ Pa had a larger strain % than the stiffer hydrogels with G’ of 10⁴ Pa. Full article

(This article belongs to the Special Issue Advances in Cellulose-Based Hydrogels (2nd Edition))

► Show Figures

Figure 1

13 pages, 2125 KiB

Open AccessArticle

Does Supramolecular Gelation Require an External Trigger?

by Ruben Van Lommel, Julie Van Hooste, Johannes Vandaele, Gert Steurs, Tom Van der Donck, Frank De Proft, Susana Rocha, Dimitrios Sakellariou, Mercedes Alonso and Wim M. De Borggraeve

Gels 2022, 8(12), 813; https://doi.org/10.3390/gels8120813 - 10 Dec 2022

Cited by 3 | Viewed by 2179

Abstract

The supramolecular gelation of small molecules is typically preceded by an external stimulus to trigger the self-assembly. The need for this trigger stems from the metastable nature of most supramolecular gels and can limit their applicability. Herein, we present a small urea-based molecule [...] Read more.

The supramolecular gelation of small molecules is typically preceded by an external stimulus to trigger the self-assembly. The need for this trigger stems from the metastable nature of most supramolecular gels and can limit their applicability. Herein, we present a small urea-based molecule that spontaneously forms a stable hydrogel by simple mixing without the addition of an external trigger. Single particle tracking experiments and observations made from scanning electron microscopy indicated that triggerless gelation occurred in a similar fashion as the archetypical heat-triggered gelation. These results could stimulate the search for other supramolecular hydrogels that can be obtained by simple mixing. Furthermore, the mechanism of the heat-triggered supramolecular gelation was elucidated by a combination of molecular dynamics simulations and quantitative NMR experiments. Surprisingly, hydrogelation seemingly occurs via a stepwise self-assembly in which spherical nanoparticles mature into an entangled fibrillary network. Full article

(This article belongs to the Special Issue Preparation, Properties and Applications of Functional Hydrogels)

► Show Figures

Figure 1

13 pages, 12173 KiB

Open AccessArticle

Construction of a Novel Lipase Catalytic System Based on Hybrid Membranes with Interwoven Electrospun Polyacrylic Acid and Polyvinyl Pyrrolidone Gel Fibers

by Ziheng Wang, Shumiao Lin, Qianqian Zhang, Jinlong Li and Sheng Yin

Gels 2022, 8(12), 812; https://doi.org/10.3390/gels8120812 - 10 Dec 2022

Cited by 2 | Viewed by 2090

Abstract

Efficient lipase catalysis requires sufficient oil–water interface engineered through structural design. Inspired by the architectural features of fabrics, a novel lipase-membrane catalytic system with interwoven polyacrylic acid (PAA) gel fibers and polyvinyl pyrrolidone (PVP) gel fibers was developed in this study by using [...] Read more.

Efficient lipase catalysis requires sufficient oil–water interface engineered through structural design. Inspired by the architectural features of fabrics, a novel lipase-membrane catalytic system with interwoven polyacrylic acid (PAA) gel fibers and polyvinyl pyrrolidone (PVP) gel fibers was developed in this study by using double-needle electrospinning and gelation. It has been demonstrated that PAA/PVP hybrid gel fiber membranes (HGFMs) have a high swelling capacity for both water and oil phases, which created numerous discontinuous oil–water contact surface units in limited space of HGFMs, consequently forming effective interfacial catalytic systems. Volume competition between the water and oil phases suggests that balancing the proportions of these phases is very important for effective construction of oil–water interfaces and conditioning catalysis. Regulation of multiple factors of PAA/PVP HGFMs resulted in a catalytic efficiency of up to 2.1 times that of a macroscopic “oil-up/water-down” system (room temperature, pH = 7), and 2.9 times when three membranes are superimposed, as well as excellent pH and temperature stability. HGFMs were stacked to build a high-performing catalytic performance reactor. We expect that this study will be a beneficial exploration for expanding the lipase catalytic system. Full article

► Show Figures

Graphical abstract

13 pages, 5902 KiB

Open AccessArticle

Effect of Thermal Treatment on the Structure and Morphology of Vanadium Doped ZnO Nanostructures Obtained by Microwave Assisted Sol–Gel Method

by Cristina Maria Vlăduț, Oana-Cătălina Mocioiu, Silviu Preda, Jeanina Pandele-Cusu, Veronica Bratan, Roxana Trusca and Maria Zaharescu

Gels 2022, 8(12), 811; https://doi.org/10.3390/gels8120811 - 10 Dec 2022

Cited by 5 | Viewed by 1587

Abstract

In this paper, we conducted a fundamental study concerning the effect of thermal treatment on the structure and morphology of 2 mol% vanadium doped ZnO nanopowders obtained by microwave assisted sol–gel method (MW). The samples were analyzed by DTA, FTIR, XRD, SEM, and [...] Read more.

In this paper, we conducted a fundamental study concerning the effect of thermal treatment on the structure and morphology of 2 mol% vanadium doped ZnO nanopowders obtained by microwave assisted sol–gel method (MW). The samples were analyzed by DTA, FTIR, XRD, SEM, and UV–Vis spectroscopy. The DTA results showed that above 500 °C, there was no mass loss in the TG curves, and ZnO crystallization occurred. The XRD patterns of the thermally treated powders at 500 °C and 650 °C showed the crystallization of ZnO (zincite) belonging to the wurtzite-type structure. It was found that in the 650 °C thermally treated powder, aside from ZnO, traces of Zn₃(VO₄)₂ existed. FTIR spectra of the annealed samples confirmed the formation of the ZnO crystalline phase and V–O bands. The micrographs revealed that the temperature influenced the morphology. The increase in the annealing temperature led to the grain growth. The SEM images of the MW powder thermally treated at 650 °C showed two types of grains: hexagonal grains and cylindrical nanorods. UV–Vis spectra showed that the absorption band also increased with the increasing temperature of thermal treatment. The MW sample annealed at 650 °C had the highest absorption in ultraviolet domain. Full article

(This article belongs to the Special Issue Colorful Gels)

► Show Figures

Figure 1

17 pages, 2601 KiB

Open AccessArticle

Preparation and Superstrong Adsorption of a Novel La(Ⅲ)-Crosslinked Alginate/Modified Diatomite Macroparticle Composite for Anionic Dyes Removal from Aqueous Solutions

by Yuting Zhao and Beigang Li

Gels 2022, 8(12), 810; https://doi.org/10.3390/gels8120810 - 10 Dec 2022

Cited by 21 | Viewed by 1801

Abstract

In order to solve the problem of dye pollution of the water environment, a green macroparticle composite (CPAM-Dia/SA-La) as a bioadsorbent was prepared through a sodium alginate (SA) reaction with a polyacrylamide (CPAM)-modified diatomite (Dia) and further La(III) ion crosslinking polymerization, and characterized [...] Read more.

In order to solve the problem of dye pollution of the water environment, a green macroparticle composite (CPAM-Dia/SA-La) as a bioadsorbent was prepared through a sodium alginate (SA) reaction with a polyacrylamide (CPAM)-modified diatomite (Dia) and further La(III) ion crosslinking polymerization, and characterized by various analytical methods. The important preparation and adsorption conditions of the composite were explored by the adsorption of Acid blue 113 (AB 113) and Congo red (CR) dyes. The dye adsorption efficiency was evaluated. The results show that CPAM-Dia/SA-La composite prepared under the optimized conditions displays superstrong adsorption capacities of 2907 and 1578 mg/g for AB 113 and CR and almost 100% removal efficiency within 60 min adsorption time at pH 2.0 and 298 K, and they decrease slightly with the pH increase to 10. The fitting of equilibrium data to the Langmuir model is the best and the adsorption kinetic processes can be expressed by the Pseudo-second-order kinetic model. The adsorption processes are both spontaneous and exothermic. The analysis results of FT−IR and XPS revealed that the superstrong adsorption of CPAM-Dia/SA-La for dyes. The composite adsorbed by the dye can be recycled. CPAM-Dia/SA-La is a promising biosorbent for dye wastewater treatment. Full article

► Show Figures

Graphical abstract

19 pages, 4187 KiB

Open AccessArticle

Comparative Study of Pd-Mayenite Catalysts Prepared via Aerogel Approaches

by Ekaterina V. Ilyina, Alexander F. Bedilo, Grigory B. Veselov, Yuri Y. Gerus, Ekaterina I. Shuvarakova, Vladimir O. Stoyanovskii and Aleksey A. Vedyagin

Gels 2022, 8(12), 809; https://doi.org/10.3390/gels8120809 - 10 Dec 2022

Cited by 3 | Viewed by 1544

Abstract

Pd-containing catalysts based on highly dispersed aerogel-derived mayenite were prepared via two approaches. The Pd@C12A7 sample was obtained through the addition of Pd nitrate solution to a fresh Ca(OH)₂-Al(OH)₃ gel. Pd/C12A7 was synthesized through conventional wet impregnation of the aerogel-derived [...] Read more.

Pd-containing catalysts based on highly dispersed aerogel-derived mayenite were prepared via two approaches. The Pd@C12A7 sample was obtained through the addition of Pd nitrate solution to a fresh Ca(OH)₂-Al(OH)₃ gel. Pd/C12A7 was synthesized through conventional wet impregnation of the aerogel-derived mayenite. The evolution of the textural characteristics of the support (C12A7) depending on the calcination temperature was investigated. Pd-containing samples were explored using transmission electron microscopy and spin probe EPR spectroscopy. Using the latter method, the presence of active oxygen species capable of producing nitroxyl radicals from diphenylamine was observed. The activity of these species and the reproducibility of their redox behavior were studied in three cycles of temperature-programmed reduction in both hydrogen and CO atmospheres. A prompt thermal aging technique was used to access and compare the activity of the samples towards CO oxidation. The state of Pd species before and after the aging procedure was studied via UV–Vis spectroscopy. It was found that the dispersion of PdO was higher in the case of the Pd/C12A7 catalysts compared to the Pd@C12A7 sample. This is why the Pd/C12A7 catalyst demonstrated higher activity in CO oxidation and better reducibility in TPR cycles. Full article

► Show Figures

Figure 1

Journal Menu

Journal Browser

Gels, Volume 8, Issue 12 (December 2022) – 81 articles

Further Information

Guidelines

MDPI Initiatives

Follow MDPI