Next Issue
Volume 9, December
Previous Issue
Volume 9, October
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
4.7
5.0
Journals
Gels
Volume 9
Issue 11
share announcement

Gels, Volume 9, Issue 11 (November 2023) – 78 articles

Cover Story (view full-size image): Resveratrol is characterized by non-suitable physicochemical properties for its topical application. To allow its benefits to manifest on human skin, resveratrol has been entrapped within liquid crystal nanocarriers (LCNs) made up of glyceryl monooleate, a penetration enhancer, and DSPE-PEG 750. The nanosystems have been more deeply characterized by using dynamic light scattering and a Turbiscan Lab® Expert optical analyzer, and they have been tested in vitro on NCTC 2544. The improved antioxidant activity of entrapped resveratrol was evaluated on keratinocyte cells as a function of its concentration. Finally, to propose the resveratrol-loaded LCNs for topical use, the systems were gelled by using two different gelling agents to increase the contact time between skin and formulation. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
11 pages, 1296 KiB  
Article
Evaluation of a Fish Gelatin-Based Edible Film Incorporated with Ficus carica L. Leaf Extract as Active Packaging
by Hanan Rizqy Fauzan, Andriati Ningrum and Supriyadi Supriyadi
Gels 2023, 9(11), 918; https://doi.org/10.3390/gels9110918 - 20 Nov 2023
Viewed by 2052
Abstract
The significant concerns associated with the widespread use of petroleum-based plastic materials have prompted substantial research on and development of active food packaging materials. Even though fish gelatin-based films are appealing as active food packaging materials, they present practical production challenges. Therefore, this [...] Read more.
The significant concerns associated with the widespread use of petroleum-based plastic materials have prompted substantial research on and development of active food packaging materials. Even though fish gelatin-based films are appealing as active food packaging materials, they present practical production challenges. Therefore, this study aimed to develop an edible film using Ficus carica L. leaf extract (FLE), as it is affordable, accessible, and has superoxide anion radical scavenging action. This edible film was produced by adding FLE to mackerel skin gelatin at varied concentrations (2.5–10% w/w). The results showed that adding FLE to gelatin films significantly affected the tensile strength (TS), elongation at break (EAB), transmittance and transparency, solubility, water vapor permeability (WVP), antioxidant activity, and antibacterial activity. Among all the samples, the most promising result was obtained for the edible film with FLE 10%, resulting in TS, EAB, solubility, WVP, antioxidant activity, and antibacterial activity against S. aureus and E. coli results of 2.74 MPa, 372.82%, 36.20%, 3.96 × 10−11 g/msPa, 45.49%, 27.27 mm, and 25.10 mm, respectively. The study’s overall findings showed that fish gelatin-based films incorporated with FLE are promising eco-friendly, biodegradable, and sustainable active packaging materials. Full article
(This article belongs to the Special Issue Recent Developments in Food Gels)
►▼ Show Figures

Figure 1

13 pages, 2070 KiB  
Article
Factors That Influence Base-Catalyzed Thiol-Ene Hydrogel Synthesis
by Nolan Morrison and Brandon M. Vogel
Gels 2023, 9(11), 917; https://doi.org/10.3390/gels9110917 - 20 Nov 2023
Cited by 1 | Viewed by 2834
Abstract
Injectable, localized drug delivery using hydrogels made from ethoxylated trimethylolpropane tri-3-mercaptopropionate (ETTMP) and poly(ethylene glycol) diacrylate (PEGDA) has shown great potential due to these hydrogels’ ability to exhibit non-swelling behavior and tunable drug release properties. However, current synthesis methods in the literature suffer [...] Read more.
Injectable, localized drug delivery using hydrogels made from ethoxylated trimethylolpropane tri-3-mercaptopropionate (ETTMP) and poly(ethylene glycol) diacrylate (PEGDA) has shown great potential due to these hydrogels’ ability to exhibit non-swelling behavior and tunable drug release properties. However, current synthesis methods in the literature suffer from poor ETTMP solubility in water, slow gelation times exceeding 20 min, and a lack of reproducibility. To address these limitations, we have developed a reliable synthesis procedure and conducted a sensitivity analysis of key variables. This has enabled us to synthesize ETTMP-PEGDA hydrogels in a polymer concentration range of 15 to 90 wt% with gelation times of less than 2 min and moduli ranging from 3.5 to 190 kPa. We overcame two synthesis limitations by identifying the impact of residual mercaptopropionic acid and alumina purification column height on gelation time and by premixing ETTMP and PEGDA to overcome low ETTMP solubility in water. Our ETTMP-PEGDA mixture can be stored at −20 °C for up to 2 months without crosslinking, allowing easy storage and shipment. These and previous results demonstrate the potential of ETTMP-PEGDA hydrogels as promising candidates for injectable, localized drug delivery with tunable drug release properties. Full article
(This article belongs to the Special Issue Advances in Chemistry and Physics of Hydrogels)
►▼ Show Figures

Graphical abstract

26 pages, 8003 KiB  
Article
Adsorption of Safranin O Dye by Alginate/Pomegranate Peels Beads: Kinetic, Isotherm and Thermodynamic Studies
by Amina Abbaz, Sihem Arris, Gianluca Viscusi, Asma Ayat, Halima Aissaoui and Yasser Boumezough
Gels 2023, 9(11), 916; https://doi.org/10.3390/gels9110916 - 18 Nov 2023
Cited by 12 | Viewed by 2289
Abstract
Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and [...] Read more.
Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and pomegranate fruit peels (PP) were developed for the adsorption of Safranin O dye (SO) in aqueous solutions. The obtained Alg−PP beads were widely characterized. The effects of the contact time (0–180 min), initial concentration (10–300 mg/L), initial pH (2–10), adsorbent dosage (1–40 g/L) and the temperature (293–333 K) were investigated through batch tests. The data proved that the adsorption kinetics of SO reached equilibrium within 30 min and up to 180 min. The dye adsorption is concentration dependent while a slight effect of pH was observed. The adsorption data of SO onto synthesized beads follow the pseudo second-order model. The experimental data fitted very well to Langmuir model with correlation factor of 0.92 which demonstrated the favourable nature of adsorption. The maximum adsorption capacity of Alg−PP could reach 30.769 mg/g at 293 K. Calculation of Gibbs free energy and enthalpy indicated that adsorption of SO onto Alg−PP is spontaneous (negative ΔG) and endothermic (ΔH = 9.30 kJ/mol). Analysis of diffusion and mass transport phenomena were presented. The removal efficiency was found to be 88% at the first cycle and decreased to 71% at the end of the seventh cycle. The reported results revealed that the Alg−PP beads could be used as a novel natural adsorbent for the removal of high concentrated solutions of Safranin O which is a cationic dye from liquid affluents and as future perspective, it can be used to remove various pollutants from wastewater. Full article
(This article belongs to the Special Issue Advances in Responsive Hydrogels)
►▼ Show Figures

Graphical abstract

14 pages, 4024 KiB  
Article
Fabrication and Characterisation of Hydrogels with Reversible Wrinkled Surfaces for Limbal Study and Reconstruction
by Ryan L. Dimmock, Michael Rotherham, Alicia J. El Haj and Ying Yang
Gels 2023, 9(11), 915; https://doi.org/10.3390/gels9110915 - 18 Nov 2023
Cited by 1 | Viewed by 1449
Abstract
In the biomedical field, there is a demand for the development of novel approaches for the investigation of optical epithelial anatomical features with biomimetic materials. These materials are not only required to replicate structures but also enable dynamic modelling for disease states such [...] Read more.
In the biomedical field, there is a demand for the development of novel approaches for the investigation of optical epithelial anatomical features with biomimetic materials. These materials are not only required to replicate structures but also enable dynamic modelling for disease states such as limbal stem cell deficiency and ageing. In the present study, the effective generation of reversible wrinkled polydimethylsiloxane (PDMS) substrates was undertaken to mimic the undulating anatomy of the limbal epithelial stem cell niche. This undulating surface pattern was formed through a dual treatment with acid oxidation and plasma using an innovatively designed stretching frame. This system enabled the PDMS substrate to undergo deformation and relaxation, creating a reversible and tuneable wrinkle pattern with cell culture applications. The crypt-like pattern exhibited a width of 70–130 µm and a depth of 17–40 µm, resembling the topography of a limbal epithelial stem cell niche, which is characterised by an undulating anatomy. The cytocompatibility of the patterned substrate was markedly improved using a gelatin methacrylate polymer (GelMa) coating. It was also observed that these wrinkled PDMS surfaces were able to dictate cell growth patterns, showing alignment in motile cells and colony segregation in colony-forming cells when using human and porcine limbal cells, respectively. Full article
(This article belongs to the Special Issue Properties and Characterization of Hydrogels Based on Biopolymers with Biomedical Applications)
►▼ Show Figures

Graphical abstract

14 pages, 3461 KiB  
Article
Short-Stranded Zein Fibers for Muscle Tissue Engineering in Alginate-Based Composite Hydrogels
by Lea Melzener, Sergio Spaans, Nicolas Hauck, André J. G. Pötgens, Joshua E. Flack, Mark J. Post and Arın Doğan
Gels 2023, 9(11), 914; https://doi.org/10.3390/gels9110914 - 17 Nov 2023
Cited by 5 | Viewed by 2259
Abstract
Cultivated meat is a nascent technology that aims to create an environmentally and animal-friendly alternative to conventional meat. Producing skeletal muscle tissue in an animal-free system allowing for high levels of myofusion and maturation is important for the nutritional and sensorial value of [...] Read more.
Cultivated meat is a nascent technology that aims to create an environmentally and animal-friendly alternative to conventional meat. Producing skeletal muscle tissue in an animal-free system allowing for high levels of myofusion and maturation is important for the nutritional and sensorial value of cultivated meat. Alginate is an attractive biomaterial to support muscle formation as it is food-safe, sustainable and cheap and can be crosslinked using non-toxic methods. Although alginate can be functionalized to promote cell attachment, limitations in its mechanical properties, including form, viscosity, and stress relaxation, hinder the cellular capacity for myogenic differentiation and maturation in alginate-based hydrogels. Here, we show that the addition of electrospun short-stranded zein fibers increased hydrogel degradation, resulting in faster compaction, improved cell–gel interaction, and enhanced alignment of bovine muscle precursor cells. We conclude that fiber-hydrogel composites are a promising approach to support optimal formation of 3D constructs, by improving tissue stability and thus prolonging culture duration. Together, this improves muscle-related protein content by facilitating myogenic differentiation and priming muscle organoids for maturation. Full article
(This article belongs to the Special Issue Food Gels: Properties and Applications)
►▼ Show Figures

Figure 1

17 pages, 5037 KiB  
Article
Injectable Decellularized Extracellular Matrix-Based Bio-Ink with Excellent Biocompatibility for Scarless Urethra Repair
by Wenzhuo Fang, Ming Yang, Yangwang Jin, Kaile Zhang, Ying Wang, Meng Liu, Yuhui Wang, Ranxing Yang and Qiang Fu
Gels 2023, 9(11), 913; https://doi.org/10.3390/gels9110913 - 17 Nov 2023
Cited by 3 | Viewed by 1754
Abstract
In recent years, decellularized extracellular matrices (dECM) derived from organs have attracted much attention from researchers due to their excellent biocompatibility, capacity to promote cell proliferation and migration, as well as pro-vascularization. However, their inferior mechanical properties, slow cross-linking, weak strengths, and poor [...] Read more.
In recent years, decellularized extracellular matrices (dECM) derived from organs have attracted much attention from researchers due to their excellent biocompatibility, capacity to promote cell proliferation and migration, as well as pro-vascularization. However, their inferior mechanical properties, slow cross-linking, weak strengths, and poor supporting properties remain their inevitable challenges. In our study, we fabricated a novel dECM hydrogel with better crosslinking strength and speed, stronger support properties, and better mechanical properties. The hydrogel, which we named gelatin-based dECM powder hydrogel (gelatin-dECM hydrogel), was prepared by mixing dECM microparticles in gelatin solution and adding certain amount of 1-Ethyl-3-(3-dimethyl-aminopropyl-1-carbodiimide) (EDC) and N-hydroxysuccinimide (NHS). We evaluated the utility of this hydrogel by assessing the degradation rate, mechanical properties, and biocompatibility. The results showed that the gelatin-dECM hydrogel has high mechanical properties and biocompatibility and also has the ability to promote cell proliferation and migration. After injection of this hydrogel around the surgical sites of urethras in rabbits, the incorporation of dECM powder was demonstrated to promote angiogenesis as well as scarless repair by histological sections after surgery. The application of this novel hydrogel provides a new perspective for the treatment of post-traumatic urethral stricture. Full article
(This article belongs to the Special Issue Functional Gel Materials and Applications)
►▼ Show Figures

Figure 1

17 pages, 3102 KiB  
Article
Polymeric Hydrogels for Intervertebral Disc Replacement/Integration: Playing with the Chemical Composition for Tuning Shear Behavior and Hydrophilicity
by Devid Maniglio, Elia Bissoli, Emanuela Callone, Sandra Dirè and Antonella Motta
Gels 2023, 9(11), 912; https://doi.org/10.3390/gels9110912 - 17 Nov 2023
Viewed by 1378
Abstract
Damages to the intervertebral disc (IVD) due to improper loading or degeneration result in back pain, which is a common disease affecting an increasing number of patients. Different strategies for IVD remediation have been developed, from surgical treatment to disc replacement, by using [...] Read more.
Damages to the intervertebral disc (IVD) due to improper loading or degeneration result in back pain, which is a common disease affecting an increasing number of patients. Different strategies for IVD remediation have been developed, from surgical treatment to disc replacement, by using both metallic and non-metallic materials. Hydrogels are very attractive materials due to their ability to simulate the properties of many soft tissues; moreover, their chemical composition can be varied in order to assure performances similar to the natural disc. In particular, for the replacement of the IVD outer ring, namely, the anulus fibrosus, the shear properties are of paramount importance. In this work, we produced hydrogels through the photo-induced crosslinking of different mixtures composed of two hydrophilic monofunctional and difunctional polymers, namely, poly(ethyleneglycol) methyl ether methacrylate (PEGMEMA) and poly(ethyleneglycol) dimethacrylate (PEGDMA), together with a hydrophobic molecule, i.e., tert-butyl acrylate (tBA). By changing the ratio among the precursors, we demonstrated the tunability of both the shear properties and hydrophilicity. The structural properties of hydrogels were studied by solid-state nuclear magnetic resonance (NMR). These experiments provided insights on both the structure and molecular dynamics of polymeric networks and, together with information obtained by differential scanning calorimetry (DSC), allowed for correlating the physical properties of the hydrogels with their chemical composition. Full article
(This article belongs to the Special Issue Structured Gels: Mechanics, Responsivity and Applications)
►▼ Show Figures

Graphical abstract

14 pages, 2980 KiB  
Article
Evaluation of Oleogels Stabilized by Particles of Birch Outer Bark Extract through a Novel Approach
by Sanita Vitolina, Rudolfs Berzins, Janis Rizhikovs, Daniela Godina, Zoltán Márk Horváth, Konstantins Logviss, Arturs Teresko and Aigars Paze
Gels 2023, 9(11), 911; https://doi.org/10.3390/gels9110911 - 17 Nov 2023
Cited by 1 | Viewed by 1766
Abstract
Structuring liquid oils into oleogels using natural and abundant biomass components as gelling agents is of great significance in fields such as foods, pharmaceuticals, and cosmetics. In this work, a more energy-efficient and technologically simpler approach for directly preparing birch outer bark extract [...] Read more.
Structuring liquid oils into oleogels using natural and abundant biomass components as gelling agents is of great significance in fields such as foods, pharmaceuticals, and cosmetics. In this work, a more energy-efficient and technologically simpler approach for directly preparing birch outer bark extract particles containing oleogel was used. This method involves introducing birch outer bark extract particles into the oil phase directly from the extract solution, combining both the evaporation of solution and gel formation. As a result, stable oleogels of various vegetable oils (sunflower, almond, olive, and hemp seed) were obtained with birch outer bark extract particle contents of 4–10%. Infrared spectroscopy and particle size analysis confirmed that when increasing the content of extract particles in the oil, increasing self-assembly of extract particles via hydrogen bonding occurs, leading to the formation of a more structured network. This is consistent with gel strength values from rheological tests of oleogels, which also increased with particle concentration. The obtained oleogels showed important properties such as good tolerance to time-dependent deformation, shear thinning, and thermoreversibility. Full article
(This article belongs to the Section Gel Applications)
►▼ Show Figures

Figure 1

15 pages, 2208 KiB  
Article
Effects of Transglutaminase on Myofibrillar Protein Composite Gels with Addition of Non-Meat Protein Emulsion
by Mangang Wu, Qing Yin, Junjie Bian, Yuyu Xu, Chen Gu, Junying Jiao, Jingjing Yang and Yunlin Zhang
Gels 2023, 9(11), 910; https://doi.org/10.3390/gels9110910 - 17 Nov 2023
Cited by 5 | Viewed by 1524
Abstract
The emulsions prepared by three non-meat proteins, sodium caseinate (SC), soy protein isolate (SPI) and egg white protein (EPI), were individually added to the continuous phase of myofibrillar protein (MP) sol to form MP composite gels to simulate meat products. The research aimed [...] Read more.
The emulsions prepared by three non-meat proteins, sodium caseinate (SC), soy protein isolate (SPI) and egg white protein (EPI), were individually added to the continuous phase of myofibrillar protein (MP) sol to form MP composite gels to simulate meat products. The research aimed to investigate the effects of Transglutaminase (TGase) on the physicochemical properties, microstructure and water phase distribution of non-meat protein emulsion MP composite gels. The results of this study revealed that TGase played a crucial role in forming a tight gel network structure in the composite gels. This enhanced their ability to retain water and improved their overall gel strength. Additionally, TGase increased the gel formation temperature of myofibrillar proteins. Electrophoresis analysis showed that when catalyzed by TGase, there was a lighter band compared to those not catalyzed by TGase. This indicated that the addition of TGase facilitated cross-linking interactions between meat proteins and non-meat proteins in the composite gels. Furthermore, microscopy observations demonstrated that composite gels treated with TGase exhibited a more uniform microstructure. This could be attributed to an acceleration in relaxation time T2. The uniform network structure restricted the movement of water molecules in the gel matrix, thereby improving its water-holding capacity. Overall, these findings highlight how incorporating non-meat proteins into myofibrillar systems can be effectively achieved through enzymatic treatment with TGase. Such modifications not only enhanced important functional properties but also contributed towards developing alternative meat products with improved texture and moisture retention abilities. Full article
(This article belongs to the Special Issue Food Gels: Gelling Process and Novel Applications)
►▼ Show Figures

Figure 1

18 pages, 7149 KiB  
Article
Linear Polyethyleneimine-Based and Metal Organic Frameworks (DUT-67) Composite Hydrogels as Efficient Sorbents for the Removal of Methyl Orange, Copper Ions, and Penicillin V
by Luis M. Araque, Roberto Fernández de Luis, Arkaitz Fidalgo-Marijuan, Antonia Infantes-Molina, Enrique Rodríguez-Castellón, Claudio J. Pérez, Guillermo J. Copello and Juan M. Lázaro-Martínez
Gels 2023, 9(11), 909; https://doi.org/10.3390/gels9110909 - 16 Nov 2023
Cited by 2 | Viewed by 1636
Abstract
This research explores the integration of DUT-67 metal organic frameworks into polyethyleneimine-based hydrogels to assemble a composite system with enough mechanical strength, pore structure and chemical affinity to work as a sorbent for water remediation. By varying the solvent-to-modulator ratio in a water-based [...] Read more.
This research explores the integration of DUT-67 metal organic frameworks into polyethyleneimine-based hydrogels to assemble a composite system with enough mechanical strength, pore structure and chemical affinity to work as a sorbent for water remediation. By varying the solvent-to-modulator ratio in a water-based synthesis path, the particle size of DUT-67 was successfully modulated from 1 μm to 200 nm. Once DUT-67 particles were integrated into the polymeric hydrogel, the composite hydrogel exhibited enhanced mechanical properties after the incorporation of the MOF filler. XPS, NMR, TGA, FTIR, and FT Raman studies confirmed the presence and interaction of the DUT-67 particles with the polymeric chains within the hydrogel network. Adsorption studies of methyl orange, copper(II) ions, and penicillin V on the composite hydrogel revealed a rapid adsorption kinetics and monolayer adsorption according to the Langmuir’s model. The composite hydrogel demonstrated higher adsorption capacities, as compared to the pristine hydrogel, showcasing a synergistic effect, with maximum adsorption capacities of 473 ± 21 mg L−1, 86 ± 6 mg L−1, and 127 ± 4 mg L−1, for methyl orange, copper(II) ions, and penicillin V, respectively. This study highlights the potential of MOF-based composite hydrogels as efficient adsorbents for environmental pollutants and pharmaceuticals. Full article
(This article belongs to the Special Issue Gels for Removal and Adsorption (2nd Edition))
►▼ Show Figures

Figure 1

17 pages, 3097 KiB  
Article
A Comparative Analysis of the Physico-Chemical Properties of Pectin Isolated from the Peels of Seven Different Citrus Fruits
by Khodidash Baraiya, Virendra Kumar Yadav, Nisha Choudhary, Daoud Ali, Daya Raiyani, Vibhakar A. Chowdhary, Sheena Alooparampil, Rohan V. Pandya, Dipak Kumar Sahoo, Ashish Patel and Jigna G. Tank
Gels 2023, 9(11), 908; https://doi.org/10.3390/gels9110908 - 16 Nov 2023
Cited by 5 | Viewed by 3231
Abstract
In the present research work, pectin was isolated from the peels of seven citrus fruits (Citrus limon, Citrus limetta, Citrus sinensis, Citrus maxima, Citrus jambhiri, Citrus sudachi, and Citrus hystrix) for a comparison of its [...] Read more.
In the present research work, pectin was isolated from the peels of seven citrus fruits (Citrus limon, Citrus limetta, Citrus sinensis, Citrus maxima, Citrus jambhiri, Citrus sudachi, and Citrus hystrix) for a comparison of its physicochemical parameters and its potential use as a thickening agent, gelling agent, and food ingredient in food industries. Among the seven citrus fruits, the maximum yield of pectin was observed from Citrus sudachi, and the minimum yield of pectin was observed from Citrus maxima. The quality of each pectin sample was compared by using parameters such as equivalent weight, anhydrouronic acid (AUA) content, methoxy content, and degree of esterification. It was observed that all seven pectin samples had a high value of equivalent weight (more than 1000), suggesting that all the pectin samples had a high content of non-esterified galacturonic acid in the molecular chains, which provides viscosity and water binding properties. The methoxy content and degree of esterification of all the pectins was lower than 50%, which suggests that it cannot easily disperse in water and can form gel only in presence of divalent cations. The AUA content of all isolated pectins samples was above 65%, which suggests that the pectin was pure and can be utilized as a food ingredient in domestic foods and food industries. From the FTIR analysis of pectin, it was observed that the bond pattern of Citrus maxima, Citrus jambhiri, and Citrus hystrix was similar. The bond pattern of Citrus limon, Citrus limetta, and Citrus sinensis was similar. However, the bond pattern of Citrus sudachi was different from that of all other citrus fruits. The difference in the bond pattern was due to the hydrophobic nature of pectin purified from Citrus limon, Citrus limetta, Citrus sudachi, and Citrus sinensis and the hydrophilic nature of pectin purified from Citrus maxima, Citrus jambhiri, and Citrus hystrix. Hence, hydrophobic pectin can be utilized in the preparation of hydrogels, nanofibers, food packaging material, polysoaps, drug delivery agents, and microparticulate materials, whereas hydrophilic pectin can be utilized for the preparation of gelling and thickening agents. Full article
(This article belongs to the Special Issue Food Colloids：From Design to Application)
►▼ Show Figures

Figure 1

20 pages, 1467 KiB  
Review
Application of Injectable Hydrogels as Delivery Systems in Spinal Cord Injury
by Rong Ji, Zhizhong Hao, Hao Wang, Xingfan Li, Linyan Duan, Fangxia Guan and Shanshan Ma
Gels 2023, 9(11), 907; https://doi.org/10.3390/gels9110907 - 16 Nov 2023
Cited by 8 | Viewed by 2112
Abstract
Spinal cord injury (SCI) is a severe neurological injury caused by traffic accidents, trauma, or falls, which leads to significant loss of sensory, motor, and autonomous functions and seriously affects the patient’s life quality. Although considerable progress has been made in mitigating secondary [...] Read more.
Spinal cord injury (SCI) is a severe neurological injury caused by traffic accidents, trauma, or falls, which leads to significant loss of sensory, motor, and autonomous functions and seriously affects the patient’s life quality. Although considerable progress has been made in mitigating secondary injury and promoting the regeneration/repair of SCI, the therapeutic effects need to be improved due to drug availability. Given their good biocompatibility, biodegradability, and low immunogenicity, injectable hydrogels can be used as delivery systems to achieve controlled release of drugs and other substances (cells and proteins, etc.), offering new hope for SCI repair. In this article, we summarized the types of injectable hydrogels, analyzed their application as delivery systems in SCI, and further discussed the mechanisms of hydrogels in the treatment of SCI, such as anti-inflammatory, antioxidant, anti-apoptosis, and pro-neurogenesis. Moreover, we highlighted the potential benefits of hydrogels in the treatment of SCI in combination with therapies, including the recent advances and achievements of these promising tools. Our review may offer new strategies for the development of SCI treatments based on injectable hydrogels as delivery systems. Full article
(This article belongs to the Special Issue Gel-Based Materials: Preparations and Characterization)
►▼ Show Figures

Figure 1

19 pages, 5911 KiB  
Article
Superior Conductivity of Transparent ZnO/MoS2 Composite Films for Optoelectronic and Solar Cell Applications
by Shahad Tareq, Gokhan Kirkil and Bengü Özuğur Uysal
Gels 2023, 9(11), 906; https://doi.org/10.3390/gels9110906 - 16 Nov 2023
Viewed by 1651
Abstract
The use of transparent conductive oxides in optoelectronics created a revolution where new-generation materials with high transmittance, low sheet resistance values, durability, and portability can be achieved without decreasing efficiency or increasing costs. Transparent ZnO/MoS2 sandwich-structured conductive composite films were produced in [...] Read more.
The use of transparent conductive oxides in optoelectronics created a revolution where new-generation materials with high transmittance, low sheet resistance values, durability, and portability can be achieved without decreasing efficiency or increasing costs. Transparent ZnO/MoS2 sandwich-structured conductive composite films were produced in this study via the sol–gel method, which is considered the most efficient method due to its simple process and low cost. The crystal structure properties of ZnO/MoS2 were characterized via X-ray diffraction (XRD) patterns. The crystal sizes of ZnO films doped with different amounts of MoS2 were determined. A UV–visible absorption spectrometer was used to perform the spectroscopic analysis of the film. The area under the absorption curve and the full width of the half-maxima of absorbance data were calculated. Using these values, the optimum amount of MoS2 was determined for the best additive distribution. In addition, in order to determine the best transparent conductive material, resistance values measured via the four-point probe method were compared for different MoS2 additive amounts. The optical and electrical characterizations of transparent ZnO/MoS2 conductive oxide films were investigated. According to the parameters obtained via UV–vis spectroscopy, XRD, and four-point probe measurements, the most effective dispersion that exhibits a low width ratio and high resonance ratio was found for ZnO/MoS2 with a doping amount of 4 mg, the crystallite size of the films was found to be within the range of 21.5 and 24.6 nm, and these observations demonstrated a figure-of-merit value of more than 4.8 × 10−2 with respect to these sandwich-structured films. Compared to the values of previous studies on various transparent ZnO-doped conductive oxide materials, it is possible to claim that these new films have a structure that is very similar to the transparent conductivity characteristics of other films, and they may even be superior relative to some MoS2 amounts. Full article
(This article belongs to the Special Issue Advances in Gel-Based Devices and Flexible Electronics (2nd Edition))
►▼ Show Figures

Graphical abstract

27 pages, 6772 KiB  
Article
Tri-Component Hydrogel as Template for Nanocrystalline Hydroxyapatite Deposition Using Alternate Soaking Method for Bone Tissue Engineering Applications
by Irina Mihaela Pelin, Irina Popescu, Manuela Calin, Daniela Rebleanu, Geanina Voicu, Daniela Ionita, Marius-Mihai Zaharia, Marieta Constantin and Gheorghe Fundueanu
Gels 2023, 9(11), 905; https://doi.org/10.3390/gels9110905 - 16 Nov 2023
Cited by 4 | Viewed by 1991
Abstract
Composite hydrogels containing apatite-like particles can act as scaffolds for osteoblast proliferation, with applications in bone tissue engineering. In this respect, porous biocompatible hydrogels were obtained from chitosan, oxidized pullulan, and PVA in different ratios. The stability of the hydrogels was ensured both [...] Read more.
Composite hydrogels containing apatite-like particles can act as scaffolds for osteoblast proliferation, with applications in bone tissue engineering. In this respect, porous biocompatible hydrogels were obtained from chitosan, oxidized pullulan, and PVA in different ratios. The stability of the hydrogels was ensured both by covalent bonds between aldehyde groups of oxidized pullulan and free amino groups of chitosan, and by physical bonds formed during freeze–thaw cycles and lyophilization. The deposition of calcium phosphates was performed by alternate soaking of the porous hydrogels into solutions with calcium and phosphate ions, assuring a basic pH required for hydroxyapatite formation. The mineralized hydrogels were characterized using FTIR spectroscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis, showing that inorganic particles containing between 80 and 92% hydroxyapatite were deposited in a high amount on the pore walls of the polymeric matrix. The composition of the organic matrix influenced the crystallization of calcium phosphates and the mechanical properties of the composite hydrogels. In vitro biological tests showed that mineralized hydrogels support the proliferation of MG-63 osteoblast-like cells to a greater extent compared to pristine hydrogels. Full article
(This article belongs to the Special Issue Innovative Biopolymer-Based Hydrogels (2nd Edition))
►▼ Show Figures

Graphical abstract

16 pages, 4944 KiB  
Article
Application of Taro (Colocasia esculenta) Mucilage as a Promising Antimicrobial Agent to Extend the Shelf Life of Fresh-Cut Brinjals (Eggplants)
by Mansuri M. Tosif, Aarti Bains, Gulden Goksen, Nemat Ali, Alexandru Vasile Rusu, Monica Trif and Prince Chawla
Gels 2023, 9(11), 904; https://doi.org/10.3390/gels9110904 - 15 Nov 2023
Cited by 3 | Viewed by 2687
Abstract
Taro rhizomes are a rich source of polysaccharides, including starch and mucilage. However, mucilage has excellent anti-microbial efficacy, and unique gel-forming and techno-functional properties. Therefore, this study aimed to extract and utilize taro mucilage (TM), which is viscous and has a gel-like texture, [...] Read more.
Taro rhizomes are a rich source of polysaccharides, including starch and mucilage. However, mucilage has excellent anti-microbial efficacy, and unique gel-forming and techno-functional properties. Therefore, this study aimed to extract and utilize taro mucilage (TM), which is viscous and has a gel-like texture, for the shelf-life enhancement of fresh-cut brinjals (eggplants). Mucilage was extracted using hot-water extraction and the yield was calculated to be 6.25 ± 0.87% on a dry basis. Different formulations of coating gel solutions were prepared: 1, 2, 3, 4, 5, 6, and 7%. The selection of the coating gel solution was carried out based on particle size. The smallest particle size was observed in treatment T5 (154 ± 0.81 nm) and zeta potential −27.22 ± 0.75 mV. Furthermore, cut brinjals were coated with the prepared mucilage gel solution and this showed a significant effect on the overall physicochemical properties of cut brinjals. Maximum weight loss occurred on the 10th day (12.67 ± 0.24%), as compared with coated brinjals (8.99 ± 0.42%). Minor changes were observed in pH, for the control sample significantly decreased from 4.58 ± 0.45 to 2.99 ± 0.75 on the 0th day to the 10th day, respectively. Titrable acidity of coated and uncoated cut brinjals was found to be at 0.31 ± 0.44% on the 0th day, which increased up to 0.66 ± 0.20% for the control and 0.55 ± 0.68% for coated brinjals on the 10th day. The taro mucilage coating gel (TMCG) solution showed pseudo-plastic behavior or shear-thinning fluid behavior. FTIR data confirmed the existence of several functional groups including various sugars, proteins, and hydroxylic groups. Antioxidant activity of coated and uncoated cut brinjals was found to be 22.33 ± 0.37% and 22.15 ± 0.49%, respectively. The TMCG solution showed effective results towards the various food pathogenic microorganisms. Overall, it is a natural, renewable resource that is biodegradable. This makes it an environmentally friendly alternative to synthetic additives or thickeners. It is cost effective, easily available, eco-friendly, and non-toxic. This can be an attractive feature for consumers looking for sustainable and eco-friendly options. Full article
(This article belongs to the Special Issue Food Gels: Properties and Applications)
►▼ Show Figures

Graphical abstract

16 pages, 4318 KiB  
Article
Multicomponent Peptide-Based Hydrogels Containing Chemical Functional Groups as Innovative Platforms for Biotechnological Applications
by Sabrina Giordano, Enrico Gallo, Carlo Diaferia, Elisabetta Rosa, Barbara Carrese, Nicola Borbone, Pasqualina Liana Scognamiglio, Monica Franzese, Giorgia Oliviero and Antonella Accardo
Gels 2023, 9(11), 903; https://doi.org/10.3390/gels9110903 - 15 Nov 2023
Cited by 1 | Viewed by 1875
Abstract
Multicomponent hydrogels (HGs) based on ultrashort aromatic peptides have been exploited as biocompatible matrices for tissue engineering applications, the delivery of therapeutic and diagnostic agents, and the development of biosensors. Due to its capability to gel under physiological conditions of pH and ionic [...] Read more.
Multicomponent hydrogels (HGs) based on ultrashort aromatic peptides have been exploited as biocompatible matrices for tissue engineering applications, the delivery of therapeutic and diagnostic agents, and the development of biosensors. Due to its capability to gel under physiological conditions of pH and ionic strength, the low molecular-weight Fmoc-FF (Nα-fluorenylmethoxycarbonyl-diphenylalanine) homodimer is one of the most studied hydrogelators. The introduction into the Fmoc-FF hydrogel of additional molecules like protein, organic compounds, or other peptide sequences often allows the generation of novel hydrogels with improved mechanical and functional properties. In this perspective, here we studied a library of novel multicomponent Fmoc-FF based hydrogels doped with different amounts of the tripeptide Fmoc-FFX (in which X= Cys, Ser, or Thr). The insertion of these tripeptides allows to obtain hydrogels functionalized with thiol or alcohol groups that can be used for their chemical post-derivatization with bioactive molecules of interest like diagnostic or biosensing agents. These novel multicomponent hydrogels share a similar peptide organization in their supramolecular matrix. The hydrogels’ biocompatibility, and their propensity to support adhesion, proliferation, and even cell differentiation, assessed in vitro on fibroblast cell lines, allows us to conclude that the hybrid hydrogels are not toxic and can potentially act as a scaffold and support for cell culture growth. Full article
(This article belongs to the Special Issue State-of-the-Art Gel Research in Italy)
►▼ Show Figures

Graphical abstract

15 pages, 5059 KiB  
Article
Effect of Shear History on Solid–Liquid Transition of Particulate Gel Fuels
by Jian Li, Yaning Li, Wei Xiao, Jingyan Wang and Boliang Wang
Gels 2023, 9(11), 902; https://doi.org/10.3390/gels9110902 - 15 Nov 2023
Viewed by 1232
Abstract
Investigating the structural evolution of particulate gels is a very challenging task due to their vulnerability and true flow characteristics. In this work, deeper insight into the rheological properties of gel fuels filled with fumed silica (FS) and aluminum microparticles (Al MPs) was [...] Read more.
Investigating the structural evolution of particulate gels is a very challenging task due to their vulnerability and true flow characteristics. In this work, deeper insight into the rheological properties of gel fuels filled with fumed silica (FS) and aluminum microparticles (Al MPs) was gained by changing shear procedures. Firstly, the flow curves were found to no longer follow the monotonic power law and exhibited subtle thixotropic responses. As the shear rate increased, the gel structure underwent a transition from local shear to bulk shear in the nonlinear region after yielding. This finding reveals the prevalence of nonideal local shear in industry. Secondly, the time-dependent rheological responses demonstrated that the strength spectrum of gel fuels depends on the applied shear rate, with stress relaxation more easily observed at lower shear rates. Those results involved the structural disruption, recovery, and equilibrium of particulate gels from two scales of shear rate and shear time. Full article
(This article belongs to the Section Gel Analysis and Characterization)
►▼ Show Figures

Graphical abstract

15 pages, 5143 KiB  
Article
Antioxidant, Anti-Inflammatory Effects and Ability to Stimulate Wound Healing of a Common-Plantain Extract in Alginate Gel Formulations
by Ioana Bâldea, Ildiko Lung, Ocsana Opriş, Adina Stegarescu, Irina Kacso and Maria-Loredana Soran
Gels 2023, 9(11), 901; https://doi.org/10.3390/gels9110901 - 14 Nov 2023
Cited by 1 | Viewed by 1863
Abstract
Our study aimed to investigate the biological effects of a common-plantain (Plantago major L.) extract, encapsulated in alginate, on dermal human fibroblast cultures in vitro, in view of its potential use as a wound healing adjuvant therapy. Common-plantain extracts were obtained [...] Read more.
Our study aimed to investigate the biological effects of a common-plantain (Plantago major L.) extract, encapsulated in alginate, on dermal human fibroblast cultures in vitro, in view of its potential use as a wound healing adjuvant therapy. Common-plantain extracts were obtained by infusion and ultrasound extraction, and their total polyphenolic content and antioxidant capacity were determined by spectrophotometry. The best extract, which was obtained by infusion, was further encapsulated in sodium alginate in two different formulations. Fourier Transform Infrared Spectroscopy (FTIR) was used to demonstrate the existing interactions in the obtained common-plantain extract in the alginate formulations. The encapsulation efficiency was evaluated based on the total polyphenol content. These alginate gel formulations were further used in vitro to determine their biocompatibility and antioxidant and anti-inflammatory effects by spectrophotometry and ELISA, as well as their ability to stimulate fibroblast migration (scratch test assay) at different time points. In addition, the collagen 1 and 3 levels were determined by Western blot analysis. The data showed that the microencapsulated plantain extract formulations induced an antioxidant, anti-inflammatory effect, enhanced collagen production and increased wound closure in the first 8 h of their application. These results are encouraging for the use of this alginate plantain extract formulation as an adjuvant for skin wound healing. Full article
(This article belongs to the Special Issue Hydrogels, Microgels, and Nanogels: From Fundamentals to Applications)
►▼ Show Figures

Graphical abstract

16 pages, 4523 KiB  
Article
Optimizing PCL/PLGA Scaffold Biocompatibility Using Gelatin from Bovine, Porcine, and Fish Origin
by Mina Ghafouri Azar, Lucie Wiesnerova, Jana Dvorakova, Petra Chocholata, Omid Moztarzadeh, Jiri Dejmek and Vaclav Babuska
Gels 2023, 9(11), 900; https://doi.org/10.3390/gels9110900 - 14 Nov 2023
Viewed by 1888
Abstract
This research introduces a novel approach by incorporating various types of gelatins, including bovine, porcine, and fish skin, into polycaprolactone and poly (lactic-co-glycolic acid) using a solvent casting method. The films are evaluated for morphology, mechanical properties, thermal stability, biodegradability, hemocompatibility, cell adhesion, [...] Read more.
This research introduces a novel approach by incorporating various types of gelatins, including bovine, porcine, and fish skin, into polycaprolactone and poly (lactic-co-glycolic acid) using a solvent casting method. The films are evaluated for morphology, mechanical properties, thermal stability, biodegradability, hemocompatibility, cell adhesion, proliferation, and cytotoxicity. The results show that the incorporation of gelatins into the films alters their mechanical properties, with a decrease in tensile strength but an increase in elongation at break. This indicates that the films become more flexible with the addition of gelatin. Gelatin incorporation has a limited effect on the thermal stability of the films. The composites with the gelatin show higher biodegradability with the highest weight loss in the case of fish gelatin. The films exhibit high hemocompatibility with minimal hemolysis observed. The gelatin has a dynamic effect on cell behavior and promotes long-term cell proliferation. In addition, all composite films reveal exceptionally low levels of cytotoxicity. The combination of the evaluated parameters shows the appropriate level of biocompatibility for gelatin-based samples. These findings provide valuable insights for future studies involving gelatin incorporation in tissue engineering applications. Full article
(This article belongs to the Special Issue Hydrogel for Tissue Regeneration)
►▼ Show Figures

Graphical abstract

5 pages, 207 KiB  
Editorial
Editorial on Special Issue “Recent Developments in Food Gels”
by Kandi Sridhar, Minaxi Sharma and Baskaran Stephen Inbaraj
Gels 2023, 9(11), 899; https://doi.org/10.3390/gels9110899 - 13 Nov 2023
Viewed by 1197
Abstract
Food gels have been a crucial component in the food industry for many years [...] Full article
(This article belongs to the Special Issue Recent Developments in Food Gels)
23 pages, 4650 KiB  
Article
Integrated Performance Evaluation of Aerogel-Based Fibre-Enhanced Thermal Renders Applied on Building Walls
by Marco Pedroso, José Dinis Silvestre, Maria da Glória Gomes, Ahmed Hawreen, Jéssica D. Bersch and Inês Flores-Colen
Gels 2023, 9(11), 898; https://doi.org/10.3390/gels9110898 - 13 Nov 2023
Cited by 1 | Viewed by 1510
Abstract
In this work, aerogel renders were enhanced with fibres for use in new building walls, emphasising a Mediterranean climate. The main novelty of the study relies on an integrated evaluation of the aerogel-based fibre-enhanced thermal renders from environmental, energy and economic approaches. Therefore, [...] Read more.
In this work, aerogel renders were enhanced with fibres for use in new building walls, emphasising a Mediterranean climate. The main novelty of the study relies on an integrated evaluation of the aerogel-based fibre-enhanced thermal renders from environmental, energy and economic approaches. Therefore, optimum insulation thicknesses, life cycle savings, payback periods, abiotic depletion potential from fossil fuels (ADP-ff) and global warming potential (GWP) impacts were quantified as a function of the energy consumption. The cost optimisation of aerogel-based renders enabled a reduction from 2477.4 to 1021.7 EUR∙m−3 for the reference formulation, and the sisal-optimised render led to the best-integrated performance. A higher DD* (degree-days equivalent) led to higher optimum thicknesses (the Azores required 0.02 m and 0.01 m and Bragança 0.06 m and 0.03 m for cost-optimised and non-optimised thermal renders with sisal fibre, respectively). The optimum thickness related to the ADP-ff and GWP impacts was higher, 0.04 m for the Azores and 0.09 m for Bragança. A steeper decrease in the annual energy consumption occurred for thermal renders up to 0.02 m in the Azores and 0.04 m in Bragança. Aerogel-based fibre-enhanced thermal renders had benefits, mainly from 600 DD* onwards. Full article
(This article belongs to the Special Issue Recent Advances in Aerogels)
►▼ Show Figures

Graphical abstract

16 pages, 9564 KiB  
Article
Injectable Methacrylated Gelatin Hydrogel for Safe Sodium Hypochlorite Delivery in Endodontics
by Renan Dal-Fabbro, Yu-Chi Huang, Priscila T. A. Toledo, Leticia C. Capalbo, Rhima M. Coleman, Hajime Sasaki, J. Christopher Fenno and Marco C. Bottino
Gels 2023, 9(11), 897; https://doi.org/10.3390/gels9110897 - 13 Nov 2023
Cited by 3 | Viewed by 1970
Abstract
Keeping sodium hypochlorite (NaOCl) within the root canal is challenging in regenerative endodontics. In this study, we developed a drug delivery system using a gelatin methacryloyl (GelMA) hydrogel incorporated with aluminosilicate clay nanotubes (HNTs) loaded with NaOCl. Pure GelMA, pure HNTs, and NaOCl-loaded [...] Read more.
Keeping sodium hypochlorite (NaOCl) within the root canal is challenging in regenerative endodontics. In this study, we developed a drug delivery system using a gelatin methacryloyl (GelMA) hydrogel incorporated with aluminosilicate clay nanotubes (HNTs) loaded with NaOCl. Pure GelMA, pure HNTs, and NaOCl-loaded HNTs carrying varying concentrations were assessed for chemo-mechanical properties, degradability, swelling capacity, cytocompatibility, antimicrobial and antibiofilm activities, and in vivo for inflammatory response and degradation. SEM images revealed consistent pore sizes of 70–80 µm for all samples, irrespective of the HNT and NaOCl concentration, while HNT-loaded hydrogels exhibited rougher surfaces. The hydrogel’s compressive modulus remained between 100 and 200 kPa, with no significant variations. All hydrogels demonstrated a 6–7-fold mass increase and complete degradation by the seventh day. Despite an initial decrease in cell viability, all groups recovered to 65–80% compared to the control. Regarding antibacterial and antibiofilm properties, 12.5 HNT(Double) showed the highest inhibition zone on agar plates and the most significant reduction in biofilm compared to other groups. In vivo, the 12.5 HNT(Double) group displayed partial degradation after 21 days, with mild localized inflammatory responses but no tissue necrosis. In conclusion, the HNT-NaOCl-loaded GelMA hydrogel retains the disinfectant properties, providing a safer option for endodontic procedures without harmful potential. Full article
(This article belongs to the Special Issue Designing Antimicrobial Hydrogels for Local Application)
►▼ Show Figures

Graphical abstract

16 pages, 3067 KiB  
Article
Preparation and Optimization of Bovine Serum Albumin Nanoparticles as a Promising Gelling System for Enhanced Nasal Drug Administration
by Sandra Aulia Mardikasari, Gábor Katona, Bence Sipos, Rita Ambrus and Ildikó Csóka
Gels 2023, 9(11), 896; https://doi.org/10.3390/gels9110896 - 13 Nov 2023
Cited by 5 | Viewed by 1958
Abstract
Bovine serum albumin (BSA) has been used extensively as a suitable carrier system for alternative drug delivery routes, such as nasal administration. However, the optimization of BSA nanoparticles with respect to their nasal applicability has not been widely studied. The present study focuses [...] Read more.
Bovine serum albumin (BSA) has been used extensively as a suitable carrier system for alternative drug delivery routes, such as nasal administration. However, the optimization of BSA nanoparticles with respect to their nasal applicability has not been widely studied. The present study focuses on the characterization of BSA nanoparticles prepared using the desolvation method, followed by a gelation process to facilitate intranasal drug delivery. The results demonstrated that the ratio of BSA and the desolvating agent, ethanol, played a critical role in the nanoparticle characteristics of the BSA nanogel matrices (BSA-NGs). Based on the gelling properties, the formulations of BSA-NG 2, BSA-NG 4, and BSA-NG 6 were selected for further investigation. The Raman spectra confirmed that there were no specific changes to the secondary structures of the BSA. The mucoadhesion studies revealed moderately high mucoadhesive properties, with a mucin binding efficiency (MBE) value of around 67%, allowing the dose to avoid elimination due to rapid mucociliary clearance of the nasal passage. Via studying the nexus of the carrier system, BSA-NGs loaded with dexamethasone as a model drug were prepared and evaluated by differential scanning calorimetry (DSC) and thermal gravimetry (TG), ascertaining that no ethanol remained in the samples after the freeze-drying process. Furthermore, the viscosity measurements exhibited moderate viscosity, which is suitable for nasal liquid preparations. The in vitro release studies performed with a simulated nasal electrolyte solution (SNES) medium showed 88.15–95.47% drug release within 4 h. In conclusion, BSA nanoparticle gelling matrices can offer potential, value-added drug delivery carriers for improved nasal drug administration. Full article
(This article belongs to the Special Issue Novel Functional Gels for Biomedical Applications)
►▼ Show Figures

Figure 1

26 pages, 4956 KiB  
Review
Engineering of PVA/PVP Hydrogels for Agricultural Applications
by Eyal Malka and Shlomo Margel
Gels 2023, 9(11), 895; https://doi.org/10.3390/gels9110895 - 12 Nov 2023
Cited by 14 | Viewed by 3383
Abstract
Hydrogels have gained significant popularity in agricultural applications in terms of minimizing waste and mitigating the negative environmental impact of agrochemicals. This review specifically examines the utilization of environmentally friendly, shapable hydrogels composed of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) in various casings [...] Read more.
Hydrogels have gained significant popularity in agricultural applications in terms of minimizing waste and mitigating the negative environmental impact of agrochemicals. This review specifically examines the utilization of environmentally friendly, shapable hydrogels composed of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) in various casings for crop protection against different pests, fertilizing, and watering. To activate their effectiveness, PVA/PVP hydrogels were loaded with both hydrophilic and hydrophobic environmentally friendly pesticides, namely hydrogen peroxide (HP), the essential oil thymol, and urea as a fertilizer, either separately or in combination. This review covers various physical and chemical approaches used for loading, shaping, and controlling the release profiles of pesticides and fertilizers. Additionally, it explores the evaluation of the chemical composition, structure, classification, rheology, and morphology of the hydrogels as well as their impact on the thermal stability of the encapsulated pesticides and fertilizer, followed by biological tests. These hydrogels significantly contribute to the stabilization and controlled release of essential nutrients and biocides for plants, while maintaining excellent biocidal and fertilizing properties as well as sustainability characteristics. By shedding light on the latest insights into the concepts, applications, and results of these hydrogels, this review demonstrates their immense potential for widespread future use in agriculture. Full article
(This article belongs to the Special Issue Bioactive Gel Films and Coatings Applied in Active Food Packaging (2nd Edition))
►▼ Show Figures

Figure 1

19 pages, 7733 KiB  
Article
Development and Characterization of Terbinafine-Loaded Nanoemulgel for Effective Management of Dermatophytosis
by Mayank Phagna, Reena Badhwar, Manvi Singh, Abdulsalam Alhalmi, Rahmuddin Khan, Omar M. Noman and Ahmad Alahdab
Gels 2023, 9(11), 894; https://doi.org/10.3390/gels9110894 - 12 Nov 2023
Viewed by 2082
Abstract
Dermatophytosis, the most prevalent fungal infection, is witnessing a rising incidence annually. To address this challenge, we developed a terbinafine-loaded oil-in-water nanoemulsion (TH-NE) through the aqueous microtitration method. The formulation comprised olive oil (oil phase), Span 80 (surfactant), and propylene glycol (co-surfactant). Pseudo-phase [...] Read more.
Dermatophytosis, the most prevalent fungal infection, is witnessing a rising incidence annually. To address this challenge, we developed a terbinafine-loaded oil-in-water nanoemulsion (TH-NE) through the aqueous microtitration method. The formulation comprised olive oil (oil phase), Span 80 (surfactant), and propylene glycol (co-surfactant). Pseudo-phase ternary diagrams and thermodynamic studies underscored the stability of TH-NE. Employing the Box–Behnken design (BBD), we optimized TH-NE, which resulted in a remarkable particle size of 28.07 nm ± 0.5, a low polydispersity index (PDI) of 0.1922 ± 0.1, and a substantial negative zeta potential of −41.87 mV ± 1. Subsequently, TH-NE was integrated into a 1.5% carbopol matrix, yielding a nanoemulgel (TH-NEG). Texture analysis of TH-NEG demonstrated a firmness of 168.00 g, a consistency of 229.81 g/s, negative cohesiveness (−83.36 g), and a work of cohesion at −107.02 g/s. In vitro drug release studies revealed an initial burst effect followed by sustained release, with TH-NEG achieving an impressive 88% release over 48 h, outperforming TH-NE (74%) and the marketed formulation (66%). Ex vivo release studies mirrored these results, with TH-NEG (86%) and TH-NE (71%) showcasing sustained drug release in comparison to the marketed formulation (67%). Confocal microscopy illustrated that TH-NEG and TH-NE penetrated to depths of 30 µm and 25 µm, respectively, into the epidermal layer. Furthermore, dermatokinetic studies highlighted the enhanced drug penetration of TH-NEG compared to TH-NE through mouse skin. In summary, our study establishes TH-NEG as a promising carrier for terbinafine in treating dermatophytosis, offering improved drug delivery and sustained release potential. Full article
(This article belongs to the Special Issue Nanosized Gel as a Drug Delivery System)
►▼ Show Figures

Figure 1

23 pages, 3993 KiB  
Article
Cellulose Nanofiber–Alginate Biotemplated Cobalt Composite Multifunctional Aerogels for Energy Storage Electrodes
by Felita W. Zhang, Paul D. Trackey, Vani Verma, Galen T. Mandes, Rosemary L. Calabro, Anthony W. Presot, Claire K. Tsay, Timothy J. Lawton, Alexa S. Zammit, Edward M. Tang, Andrew Q. Nguyen, Kennedy V. Munz, Enoch A. Nagelli, Stephen F. Bartolucci, Joshua A. Maurer and F. John Burpo
Gels 2023, 9(11), 893; https://doi.org/10.3390/gels9110893 - 11 Nov 2023
Viewed by 3387
Abstract
Tunable porous composite materials to control metal and metal oxide functionalization, conductivity, pore structure, electrolyte mass transport, mechanical strength, specific surface area, and magneto-responsiveness are critical for a broad range of energy storage, catalysis, and sensing applications. Biotemplated transition metal composite aerogels present [...] Read more.
Tunable porous composite materials to control metal and metal oxide functionalization, conductivity, pore structure, electrolyte mass transport, mechanical strength, specific surface area, and magneto-responsiveness are critical for a broad range of energy storage, catalysis, and sensing applications. Biotemplated transition metal composite aerogels present a materials approach to address this need. To demonstrate a solution-based synthesis method to develop cobalt and cobalt oxide aerogels for high surface area multifunctional energy storage electrodes, carboxymethyl cellulose nanofibers (CNF) and alginate biopolymers were mixed to form hydrogels to serve as biotemplates for cobalt nanoparticle formation via the chemical reduction of cobalt salt solutions. The CNF–alginate mixture forms a physically entangled, interpenetrating hydrogel, combining the properties of both biopolymers for monolith shape and pore size control and abundant carboxyl groups that bind metal ions to facilitate biotemplating. The CNF–alginate hydrogels were equilibrated in CaCl2 and CoCl2 salt solutions for hydrogel ionic crosslinking and the prepositioning of transition metal ions, respectively. The salt equilibrated hydrogels were chemically reduced with NaBH4, rinsed, solvent exchanged in ethanol, and supercritically dried with CO2 to form aerogels with a specific surface area of 228 m2/g. The resulting aerogels were pyrolyzed in N2 gas and thermally annealed in air to form Co and Co3O4 porous composite electrodes, respectively. The multifunctional composite aerogel’s mechanical, magnetic, and electrochemical functionality was characterized. The coercivity and specific magnetic saturation of the pyrolyzed aerogels were 312 Oe and 114 emu/gCo, respectively. The elastic moduli of the supercritically dried, pyrolyzed, and thermally oxidized aerogels were 0.58, 1.1, and 14.3 MPa, respectively. The electrochemical testing of the pyrolyzed and thermally oxidized aerogels in 1 M KOH resulted in specific capacitances of 650 F/g and 349 F/g, respectively. The rapidly synthesized, low-cost, hydrogel-based synthesis for tunable transition metal multifunctional composite aerogels is envisioned for a wide range of porous metal electrodes to address energy storage, catalysis, and sensing applications. Full article
(This article belongs to the Special Issue International Perspectives on Aerogels)
►▼ Show Figures

Figure 1

19 pages, 6914 KiB  
Article
Thrombin-Free Fibrillogenesis and Gelation of Fibrinogen Triggered by Magnesium Sulfate
by Dominik Hense and Oliver I. Strube
Gels 2023, 9(11), 892; https://doi.org/10.3390/gels9110892 - 11 Nov 2023
Cited by 3 | Viewed by 1510
Abstract
Self-assembly of the blood protein fibrinogen is a highly relevant topic in materials science and medical research. This originates from fibrinogen’s beneficial material properties such as cell interaction and biocompatibility. Within recent decades, several enzyme-free strategies to create fibers and hydrogels out of [...] Read more.
Self-assembly of the blood protein fibrinogen is a highly relevant topic in materials science and medical research. This originates from fibrinogen’s beneficial material properties such as cell interaction and biocompatibility. Within recent decades, several enzyme-free strategies to create fibers and hydrogels out of fibrinogen have been presented, broadening the spectrum of fibrinogen-based material enormously. Herein, we describe a further method to obtain such a material by adding specifically MgSO4 to fibrinogen. The key of this material is the combination of Mg2+ and a kosmotropic anion, for example sulfate or (hydrogen)phosphate. This effect is most likely related to occupancy of fibrinogen’s well-known binding sites for Mg2+, resulting in a significant increase in fiber yield and gel stability. Here, we shine light on the question of how electrostatic interactions via Mg2+ enhance fibrillogenesis and the gelation of fibrinogen and discuss first insights into the material’s properties. Full article
(This article belongs to the Special Issue Gel-Based Materials: Preparations and Characterization)
►▼ Show Figures

Graphical abstract

13 pages, 7380 KiB  
Article
A Study on Enhanced Electrorheological Performance of Plate-like Materials via Percolation Gel-like Effect
by Suk Jekal, Minki Sa, Yeon-Ryong Chu, Chan-Gyo Kim, Jungchul Noh, Jiwon Kim, Ha-Yeong Kim, Won-Chun Oh, Zambaga Otgonbayar and Chang-Min Yoon
Gels 2023, 9(11), 891; https://doi.org/10.3390/gels9110891 - 10 Nov 2023
Viewed by 1419
Abstract
The use of plate-like materials to induce a percolation gel-like effect in electrorheological (ER) fluids is sparsely documented. Hence, we dispersed plate-like materials, namely natural mica, synthetic mica, and glass, as well as their pulverized particles, in various concentrations in silicone oil to [...] Read more.
The use of plate-like materials to induce a percolation gel-like effect in electrorheological (ER) fluids is sparsely documented. Hence, we dispersed plate-like materials, namely natural mica, synthetic mica, and glass, as well as their pulverized particles, in various concentrations in silicone oil to form ER fluids. Subsequently, the rheological properties of the fluids were evaluated and compared to identify the threshold concentration for percolating a gel-like state. The shear stress and viscoelastic moduli under zero-field conditions confirmed that plate-like materials can be used to induce percolation gel-like effects in ER fluids. This is because of the high aspect ratio of the materials, which enhances their physical stability. In practical ER investigations, ER fluids based on synthetic mica (30.0 wt%) showed the highest yield stress of 516.2 Pa under an electric field strength of 3.0 kV mm−1. This was attributed to the formation of large-cluster networks and additional polarization induced by the ions. This study provides a practical approach for developing a new type of gel-like ER fluid. Full article
(This article belongs to the Special Issue Physically Cross-Linked Gels and Their Applications)
►▼ Show Figures

Graphical abstract

35 pages, 6091 KiB  
Review
Biopolymers for Tissue Engineering: Crosslinking, Printing Techniques, and Applications
by David Patrocinio, Victor Galván-Chacón, J. Carlos Gómez-Blanco, Sonia P. Miguel, Jorge Loureiro, Maximiano P. Ribeiro, Paula Coutinho, J. Blas Pagador and Francisco M. Sanchez-Margallo
Gels 2023, 9(11), 890; https://doi.org/10.3390/gels9110890 - 10 Nov 2023
Cited by 6 | Viewed by 2547
Abstract
Currently, tissue engineering has been dedicated to the development of 3D structures through bioprinting techniques that aim to obtain personalized, dynamic, and complex hydrogel 3D structures. Among the different materials used for the fabrication of such structures, proteins and polysaccharides are the main [...] Read more.
Currently, tissue engineering has been dedicated to the development of 3D structures through bioprinting techniques that aim to obtain personalized, dynamic, and complex hydrogel 3D structures. Among the different materials used for the fabrication of such structures, proteins and polysaccharides are the main biological compounds (biopolymers) selected for the bioink formulation. These biomaterials obtained from natural sources are commonly compatible with tissues and cells (biocompatibility), friendly with biological digestion processes (biodegradability), and provide specific macromolecular structural and mechanical properties (biomimicry). However, the rheological behaviors of these natural-based bioinks constitute the main challenge of the cell-laden printing process (bioprinting). For this reason, bioprinting usually requires chemical modifications and/or inter-macromolecular crosslinking. In this sense, a comprehensive analysis describing these biopolymers (natural proteins and polysaccharides)-based bioinks, their modifications, and their stimuli-responsive nature is performed. This manuscript is organized into three sections: (1) tissue engineering application, (2) crosslinking, and (3) bioprinting techniques, analyzing the current challenges and strengths of biopolymers in bioprinting. In conclusion, all hydrogels try to resemble extracellular matrix properties for bioprinted structures while maintaining good printability and stability during the printing process. Full article
(This article belongs to the Special Issue Hydrogels for 3D Printing)
►▼ Show Figures

Graphical abstract

18 pages, 6338 KiB  
Article
The Effect of Microwave Radiation on the Solidification of C-S-H Gels: Its Influence on the Solidified Cement Mixtures
by David Průša, Stanislav Šťastník, Karel Šuhajda, Kateřina Svobodová, Tomáš Žajdlík, Klára Hobzová and Miloslav Novotný
Gels 2023, 9(11), 889; https://doi.org/10.3390/gels9110889 - 10 Nov 2023
Cited by 3 | Viewed by 1222
Abstract
The present paper deals with the properties of hardened cement mixtures that have been exposed to microwave radiation. Microwaves fall under electromagnetic waves (EMW), and the main reason for using EMW radiation is to accelerate the drying of concrete as well as to [...] Read more.
The present paper deals with the properties of hardened cement mixtures that have been exposed to microwave radiation. Microwaves fall under electromagnetic waves (EMW), and the main reason for using EMW radiation is to accelerate the drying of concrete as well as to reduce the time required to obtain the handling strength after it is removed from the mould. This paper is divided into two main parts. In the first part, three sets of cement samples were made. One set of samples solidified naturally in air and the second and third sets of samples were exposed to EMW radiation, with different exposure times for each. The solidification was then stopped, and the representation of the major minerals was experimentally determined. The second part of the experiment focuses on the properties of the hardened cement mixtures, both in terms of strength and physical properties. The experiment was carried out on two sets of samples. Each mixture was exposed to EMW radiation, the main differences being the exposure time and the position of the samples relative to the EMW generator. The aim of the experiments is to determine the resulting mechanical properties of the samples in comparison with those that were subjected to normal solidification in air. The data from these experiments suggest that microwave radiation can be used to accelerate the curing of concrete specimens, obtaining the handling strength in a relatively short time, but a reduction in the resulting strength can be expected compared to the reference specimens. Full article
(This article belongs to the Special Issue Gel Formation and Processing Technologies for Material Applications)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-78
Previous Issue
Next Issue
Back to TopTop