Submit to Applied Sciences Review for Applied Sciences Propose a Special Issue

Journal Menu

Journal Browser

► Journal Browser

Buildings and Structures under Extreme Loads II

Print Special Issue Flyer
Special Issue Editors
Special Issue Information
Keywords
Benefits of Publishing in a Special Issue
Published Papers

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Civil Engineering".

Deadline for manuscript submissions: closed (15 August 2021) | Viewed by 47106

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special issue Buildings and Structures under Extreme Loads II book cover image

Share This Special Issue

Special Issue Editors

Dr. Chiara Bedon

E-Mail Website
Guest Editor

Department of Engineering and Architecture, University of Trieste, Via Valerio, 6/1, 34127 Trieste, Italy
Interests: sustainability; numerical simulation; structural analysis; structural dynamics; constructions; finite element analysis; numerical modelling
Special Issues, Collections and Topics in MDPI journals

Dr. Flavio Stochino

E-Mail Website
Guest Editor

1. Department of Civil, Environmental Engineering and Architecture, University of Cagliari, 09100 Cagliari, Italy
2. Edificio A, Via Marengo 2, 09123 Cagliari, Italy
Interests: design of reinforced concrete structures and use of recycled construction materials; analyses of extreme load on structures
Special Issues, Collections and Topics in MDPI journals

Dr. Daniel Honfi

E-Mail Website
Guest Editor

RISE Research Institutes of Sweden, Gothenburg, Sweden
Interests: structural engineering; structural safety; robustness; resilience; serviceability of structures
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Exceptional design loads on buildings and structures may have different causes, including high-strain natural hazards, man-made attacks, and accidents, as well as extreme operational conditions (severe temperature variations, humidity, etc.). All of these aspects can be critical for specific structural typologies and/or materials that are particularly sensitive to external conditions. In this regard, dedicated and refined methods are required for their design, analysis, and maintenance under the expected life-time. Major challenges are related to their structural typology and material properties, with respect to the key features of the imposed design load. Further issues can be derived from the need for the mitigation or retrofit of existing structures, as well as from the optimal and safe design of innovative materials/systems. Finally, in some cases, no appropriate design recommendations are available, and thus experimental investigations can have a key role within the overall process.

In this Special Issue, we invite the publication of original research studies, review papers, and experimental and/or numerical investigations on the structural performance of buildings and structures (including the analysis at the material, component, or assembly level) under exceptional loads. Both new design projects or the retrofit and mitigation of existing structures will be of interest for the Special Issue.

Dr. Chiara Bedon
Dr. Flavio Stochino
Dr. Daniel Honfi
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

structural analysis
extreme design loads
experiments
numerical modelling
safety
monitoring
mitigation

Benefits of Publishing in a Special Issue

Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (14 papers)

Download All Papers

Order results

Result details

Show export options Show export options

Select all

Export citation of selected articles as:

Editorial

Jump to: Research, Review

3 pages, 163 KiB

Open AccessEditorial

Special Issue on “Buildings and Structures under Extreme Loads II”

by Chiara Bedon, Flavio Stochino and Daniel Honfi

Appl. Sci. 2022, 12(5), 2660; https://doi.org/10.3390/app12052660 - 4 Mar 2022

Cited by 1 | Viewed by 1270

Abstract

Exceptional loads on buildings and structures are known to take origin and manifest from different causes, like natural hazards and possible high-strain dynamic effects, human-made attacks and impact issues for load-bearing components, possible accidents, and even unfavorable/extreme operational conditions [...] Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

Research

Jump to: Editorial, Review

21 pages, 6767 KiB

Open AccessArticle

Dynamic Response Analysis of Structures Using Legendre–Galerkin Matrix Method

by Mohammad Momeni, Mohsen Riahi Beni, Chiara Bedon, Mohammad Amir Najafgholipour, Seyed Mehdi Dehghan, Behtash JavidSharifi and Mohammad Ali Hadianfard

Appl. Sci. 2021, 11(19), 9307; https://doi.org/10.3390/app11199307 - 7 Oct 2021

Cited by 7 | Viewed by 2808

Abstract

The solution of the motion equation for a structural system under prescribed loading and the prediction of the induced accelerations, velocities, and displacements is of special importance in structural engineering applications. In most cases, however, it is impossible to propose an exact analytical solution, as in the case of systems subjected to stochastic input motions or forces. This is also the case of non-linear systems, where numerical approaches shall be taken into account to handle the governing differential equations. The Legendre–Galerkin matrix (LGM) method, in this regard, is one of the basic approaches to solving systems of differential equations. As a spectral method, it estimates the system response as a set of polynomials. Using Legendre’s orthogonal basis and considering Galerkin’s method, this approach transforms the governing differential equation of a system into algebraic polynomials and then solves the acquired equations which eventually yield the problem solution. In this paper, the LGM method is used to solve the motion equations of single-degree (SDOF) and multi-degree-of-freedom (MDOF) structural systems. The obtained outputs are compared with methods of exact solution (when available), or with the numerical step-by-step linear Newmark-β method. The presented results show that the LGM method offers outstanding accuracy. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

23 pages, 10521 KiB

Open AccessArticle

Case Study—An Extreme Example of Soil–Structure Interaction and the Damage Caused by Works on Foundation Strengthening

by Petar Santrač, Slobodan Grković, Danijel Kukaras, Neđo Đuric and Mila Svilar

Appl. Sci. 2021, 11(11), 5201; https://doi.org/10.3390/app11115201 - 3 Jun 2021

Cited by 3 | Viewed by 3899

Abstract

This paper describes the works on foundation strengthening of the towers of the Cathedral of St. Theresa of Avila in Subotica and the damages caused by these works. Strengthening was performed by means of jacked-in piles and deep soil injection. The construction of the Cathedral began in 1773 and it lasted for several decades with frequent interruptions and changes to the project. The present appearance of the facade was created in 1912. According to historic data, several years after construction, the cracks appeared on the front facade. With time, these cracks became more pronounced, and in 2015, when the remediation project started, the total width of major cracks reached about 15 cm. The first contemporary attempt to repair the towers was made in 2017 by inserting piles beneath the foundations. These works were interrupted due to increased settlements and the appearance of new cracks. In the second attempt, the strengthening was performed by deep injection of soil with expansive resins. During these works, settlements and damages intensified even more, causing the works to be halted in 2018. Analysis of the whole structure and revaluation of all the results, obtained from continuous monitoring of settlements and crack widths from the previous period, led to the new remediation proposal. The imperative was to retain the original appearance of the Cathedral facades while performing the total reconstruction of the upper sections of the front facade. This implies that the overall weight of the reconstructed parts is to be decreased, while the strength is to be increased. Strong structural connections are planned, both among the two towers, and between the towers and the nave. These clear structural solutions will lead to reduced stresses within the existing brick walls, reduced contact soil pressures and ceasing of increased settlements and tilting of the Cathedral towers. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

13 pages, 11816 KiB

Open AccessArticle

Investigation of the Time Dependence of Wind-Induced Aeroelastic Response on a Scale Model of a High-Rise Building

by Fabio Rizzo

Appl. Sci. 2021, 11(8), 3315; https://doi.org/10.3390/app11083315 - 7 Apr 2021

Cited by 6 | Viewed by 1621

Abstract

Experimental wind tunnel test results are affected by acquisition times because extreme pressure peak statistics depend on the length of acquisition records. This is also true for dynamic tests on aeroelastic models where the structural response of the scale model is affected by aerodynamic damping and by random vortex shedding. This paper investigates the acquisition time dependence of linear transformation through singular value decomposition (SVD) and its correlation with floor accelerometric signals acquired during wind tunnel aeroelastic testing of a scale model high-rise building. Particular attention was given to the variability of eigenvectors, singular values and the correlation coefficient for two wind angles and thirteen different wind velocities. The cumulative distribution function of empirical magnitudes was fitted with numerical cumulative density function (CDF). Kolmogorov–Smirnov test results are also discussed. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

18 pages, 2764 KiB

Open AccessArticle

Short-Term Analysis of Adhesive Types and Bonding Mistakes on Bonded-in-Rod (BiR) Connections for Timber Structures

by Jure Barbalić, Vlatka Rajčić, Chiara Bedon and Michal K. Budzik

Appl. Sci. 2021, 11(6), 2665; https://doi.org/10.3390/app11062665 - 17 Mar 2021

Cited by 6 | Viewed by 2638

Abstract

Bonded-in rods (BiR) represent a structural connection type that is largely used for new timber structures and rehabilitation (repair or reinforcement) of existing structural members. The technology is based on steel / Fiber Reinforced Polymer (FRP) / Glass Fiber Reinforced Polymer (GFRP) rods bonded into predrilled holes in timber elements. The mechanical advantages of BiRs include high local force capacity, improved strength, a relatively high stiffness and the possibility of ductile behaviour. They also offer aesthetic benefits, given that rods are hidden in the cross sections of wooden members. As such, BiR connections are regarded as a solution with great potential, but still uncertain design formulations. Several research projects have dealt with BiRs, but a final definition of their mechanics and a universal design procedure is still missing. This research study explores the typical fracture mechanics modes for BiR connections. A special focus is given to the evaluation of the impact of adhesive bonds under various operational conditions (i.e., moisture content of timber). A total of 84 specimens are tested in pull-out setup, and investigated with the support of digital image correlation (DIC). The reliability of empirical equations and a newly developed analytical model in support of design, based on linear elastic fracture mechanics (LEFM), is also assessed. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

18 pages, 5317 KiB

Open AccessArticle

Experimental Study on the Behavior of Existing Reinforced Concrete Multi-Column Piers under Earthquake Loading

by Jung Han Kim, Ick-Hyun Kim and Jin Ho Lee

Appl. Sci. 2021, 11(6), 2652; https://doi.org/10.3390/app11062652 - 16 Mar 2021

Cited by 2 | Viewed by 2662

Abstract

When a seismic force acts on bridges, the pier can be damaged by the horizontal inertia force of the superstructure. To prevent this failure, criteria for seismic reinforcement details have been developed in many design codes. However, in moderate seismicity regions, many existing bridges were constructed without considering seismic detail because the detailed seismic design code was only applied recently. These existing structures should be retrofitted by evaluating their seismic performance. Even if the seismic design criteria are not applied, it cannot be concluded that the structure does not have adequate seismic performance. In particular, the performance of a lap-spliced reinforcement bar at a construction joint applied by past practices cannot be easily evaluated analytically. Therefore, experimental tests on the bridge piers considering a non-seismic detail of existing structures need to be performed to evaluate the seismic performance. For this reason, six small scale specimens according to existing bridge piers were constructed and seismic performances were evaluated experimentally. The three types of reinforcement detail were adjusted, including a lap-splice for construction joints. Quasi-static loading tests were performed for three types of scale model with two-column piers in both the longitudinal and transverse directions. From the test results, the effect on the failure mechanism of the lap-splice and transverse reinforcement ratio were investigated. The difference in failure characteristics according to the loading direction was investigated by the location of plastic hinges. Finally, the seismic capacity related to the displacement ductility factor and the absorbed energy by hysteresis behavior for each test were obtained and discussed. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

21 pages, 3688 KiB

Open AccessArticle

Application of Component-Based Mechanical Models and Artificial Intelligence to Bolted Beam-to-Column Connections

by Iman Faridmehr, Mehdi Nikoo, Raffaele Pucinotti and Chiara Bedon

Appl. Sci. 2021, 11(5), 2297; https://doi.org/10.3390/app11052297 - 5 Mar 2021

Cited by 14 | Viewed by 2621

Abstract

Top and seat beam-to-column connections are commonly designed to transfer gravitational loads of simply supported steel beams. Nevertheless, the flexural resistance characteristics of these type of connections should be properly taken into account for design, when a reliable analysis of semi-rigid steel structures is desired. In this research paper, different component-based mechanical models from Eurocode 3 (EC3) and a literature proposal (by Kong and Kim, 2017) are considered to evaluate the initial stiffness (S_j,ini) and ultimate moment capacity (M_n) of top-seat angle connections with double web angles (TSACWs). An optimized artificial neural network (ANN) model based on the artificial bee colony (ABC) algorithm is proposed in this paper to acquire an informational model from the available literature database of experimental test measurements on TSACWs. In order to evaluate the expected effect of each input parameter (such as the thickness of top flange cleat, the bolt size, etc.) on the mechanical performance and overall moment–rotation (M–θ) response of the selected connections, a sensitivity analysis is presented. The collected comparative results prove the potential of the optimized ANN approach for TSACWs, as well as its accuracy and reliability for the prediction of the characteristic (M–θ) features of similar joints. For most of the examined configurations, higher accuracy is found from the ANN estimates, compared to Eurocode 3- or Kong et al.-based formulations. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

16 pages, 3506 KiB

Open AccessArticle

Influence of Additional Bracing Arms as Reinforcement Members in Wooden Timber Cross-Arms on Their Long-Term Creep Responses and Properties

by Muhammad Rizal Muhammad Asyraf, Mohamad Ridzwan Ishak, Salit Mohd Sapuan and Noorfaizal Yidris

Appl. Sci. 2021, 11(5), 2061; https://doi.org/10.3390/app11052061 - 26 Feb 2021

Cited by 38 | Viewed by 3154

Abstract

Previously, numerous creep studies on wood materials have been conducted in various coupon-scale tests. None had conducted research on creep properties of full-scale wooden cross-arms under actual environment and working load conditions. Hence, this research established findings on effect of braced arms on the creep behaviors of Virgin Balau (Shorea dipterocarpaceae) wood timber cross-arm in 132 kV latticed tower. In this research, creep properties of the main members of both current and braced wooden cross-arm designs were evaluated under actual working load conditions at 1000 h. The wooden cross-arm was assembled on a custom-made creep test rig at an outdoor area to simulate its long-term mechanical behaviours under actual environment of tropical climate conditions. Further creep numerical analyses were also performed by using Findley and Burger models in order to elaborate the transient creep, elastic and viscoelastic moduli of both wooden cross-arm configurations. The findings display that the reinforcement of braced arms in cross-arm structure significantly reduced its creep strain. The inclusion of bracing system in cross-arm structure enhanced transient creep and stress independent material exponent of the wooden structure. The addition of braced arms also improved elastic and viscoelastic moduli of wooden cross-arm structure. Thus, the outcomes suggested that the installation of bracing system in wooden cross-arm could extend the structure’s service life. Subsequently, this effort would ease maintenance and reduce cost for long-term applications in transmission towers. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

19 pages, 10093 KiB

Open AccessArticle

Numerical Analysis-Based Blast Resistance Performance Assessment of Cable-Stayed Bridge Components Subjected to Blast Loads

by Jungwhee Lee, Keunki Choi and Chulhun Chung

Appl. Sci. 2020, 10(23), 8511; https://doi.org/10.3390/app10238511 - 28 Nov 2020

Cited by 12 | Viewed by 3323

Abstract

Cable-stayed bridges are infrastructure facilities of a highly public nature; therefore, it is essential to ensure operational safety and prompt response in the event of a collapse or damage, which are caused by natural and social disasters. Among social disasters, blast accidents can occur in cable-stayed bridges as a result of explosions produced by vehicle collisions or terrorist attacks; this can lead to the degradation in their structural performances and subsequent collapse. In this research, a procedure to assess structural blast-resistance performance is suggested based on a numerical analysis approach, and the feasibility of the procedure is demonstrated by performing an example assessment. The suggested procedure includes (1) selection of major structural components that severely affect the global structural behavior, (2) set-up blast hazard scenarios consisting of various blast levels and locations, and (3) assessment of the components using numerical blast simulation. By performing an example assessment, the critical blast level for each component could be determined and the blast location that affects the considering components the most severely could be found as well. The scenario-based assessment process employed in this study is expected to facilitate the evaluation of bridge structures under blasts in both existing bridges and future designs. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

20 pages, 20279 KiB

Open AccessArticle

Numerical Investigation of the Collapse of a Steel Truss Roof and a Probable Reason of Failure

by Mertol Tüfekci, Ekrem Tüfekci and Adnan Dikicioğlu

Appl. Sci. 2020, 10(21), 7769; https://doi.org/10.3390/app10217769 - 3 Nov 2020

Cited by 6 | Viewed by 5802

Abstract

This study investigated the failure of the roof, with steel truss construction, of a factory building in Tekirdag in the northwestern part of Turkey. The failure occurred under hefty weather conditions including lightning strikes, heavy rain, and fierce winds. In order to interpret the reason for the failure, the effects of different combinations of factors on the design and dimensioning of the roof were studied. Finite element analysis, using the commercial software Abaqus (Dassault Systèmes, Vélizy-Villacoublay, France), was performed several times under different assumptions and considering different factors with the aim of determining the dominant factors that were responsible for the failure. Each loading condition gives out a characteristic form of failure. The scenario with the most similar form of failure to the real collapse is considered as the most likely scenario of failure. In addition, the factors included in this scenario are expected to be the responsible factors for the partial collapse of the steel truss structure. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

16 pages, 10506 KiB

Open AccessArticle

Study on Dynamic Behavior of Bridge Pier by Impact Load Test Considering Scour

by Myungjae Lee, Mintaek Yoo, Hyun-Seok Jung, Ki Hyun Kim and Il-Wha Lee

Appl. Sci. 2020, 10(19), 6741; https://doi.org/10.3390/app10196741 - 26 Sep 2020

Cited by 6 | Viewed by 2748

Abstract

In this study, for the establishment of a safety evaluation method, non-destructive tests were performed by developing a full-scale model pier and simulating scour on the ground adjacent to a field pier. The surcharge load (0–250 kN) was applied to the full-scale model pier to analyze the load’s effect on the stability. For analyzing the pier’s behavior according to the impact direction, an impact was applied in the bridge axis direction, pier length direction, and pier’s outside direction. The impact height corresponded to the top of the pier. A 1-m deep scour was simulated along one side of the ground, which was adjacent to the pier foundation. The acceleration was measured using accelerometers when an impact was applied. The natural frequency, according to the impact direction and surcharge load, was calculated using a fast Fourier transform (FFT). In addition, the first mode (vibratory), second mode (vibratory), and third modes (torsion) were analyzed according to the pier behavior using the phase difference, and the effect of the scour occurrence on the natural frequency was analyzed. The first mode was most affected by the surcharge load and scour. The stability of the pier can be determined using the second mode, and the direction of the scour can be determined using the third mode. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

23 pages, 5719 KiB

Open AccessArticle

Mechanical Characterization of Timber-to-Timber Composite (TTC) Joints with Self-Tapping Screws in a Standard Push-Out Setup

by Chiara Bedon, Martina Sciomenta and Massimo Fragiacomo

Appl. Sci. 2020, 10(18), 6534; https://doi.org/10.3390/app10186534 - 18 Sep 2020

Cited by 11 | Viewed by 2800

Abstract

Self-tapping screws (STSs) can be efficiently used in various fastening solutions for timber constructions and are notoriously able to offer high stiffness and load-carrying capacity, compared to other timber-to-timber composite (TTC) joint typologies. The geometrical and mechanical characterization of TTC joints, however, is often hard and uncertain, due to a combination of various influencing parameters and mechanical aspects. Among others, the effects of friction phenomena between the system components and their reciprocal interaction under the imposed design loads can remarkably influence the final estimates on structural capacity, in the same way of possible variations in the boundary conditions. The use of Finite Element (FE) numerical models is well-known to represent a robust tool and a valid alternative to costly and time consuming experiments and allows one to further explore the selected load-bearing components at a more refined level. Based on previous research efforts, this paper presents an extended FE investigation based on full three-dimensional (3D) brick models and surface-based cohesive zone modelling (CZM) techniques. The attention is focused on the mechanical characterization of small-scale TTC specimens with inclined STSs having variable configurations, under a standard push-out (PO) setup. Based on experimental data and analytical models of literature, an extended parametric investigation is presented and correlation formulae are proposed for the analysis of maximum resistance and stiffness variations. The attention is then focused on the load-bearing role of the steel screws, as an active component of TTC joints, based on the analysis of sustained resultant force contributions. The sensitivity of PO numerical estimates to few key input parameters of technical interest, including boundaries, friction and basic damage parameters, is thus discussed in the paper. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

12 pages, 6196 KiB

Open AccessArticle

Prediction of Damage Level of Slab-Column Joints under Blast Load

by Kwang Mo Lim, Do Guen Yoo, Bo Yeon Lee and Joo Ha Lee

Appl. Sci. 2020, 10(17), 5837; https://doi.org/10.3390/app10175837 - 23 Aug 2020

Cited by 1 | Viewed by 2318

Abstract

The behavior of a slab-column joint subjected to blast loads was studied by numerical analysis using a general-purpose finite element analysis program, LS-DYNA. Under the explosive load, the joint region known as the stress disturbed zone was defined as a region with a scaled distance of 0.1 m/kg^1/3 or less through comparison with ConWep’s empirical formula. Displacement and support rotation according to Trinitrotoluene (TNT) weight and scaled distance were investigated by dividing in and out of the joint region. In addition, fracture volume was newly proposed as an evaluation factor for blast-resistant performance, and it was confirmed that the degree of damage to a member due to blast loads was well represented by the fracture volume. Finally, a prediction equation for the blast-resistant performance of the slab-column joint was proposed, and the reliability and accuracy of the equation were verified through additional numerical analysis. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Figure 1

Review

Jump to: Editorial, Research

23 pages, 6550 KiB

Open AccessReview

An Overview of Progressive Collapse Behavior of Steel Beam-to-Column Connections

by Iman Faridmehr and Mohammad Hajmohammadian Baghban

Appl. Sci. 2020, 10(17), 6003; https://doi.org/10.3390/app10176003 - 29 Aug 2020

Cited by 10 | Viewed by 7556

Abstract

Local failure of one or more components due to abnormal loading can induce the progressive collapse of a building structure. In this study, by the aid of available full-scale test results on double-span systems subjected to the middle column loss scenario, an extensive parametric study was performed to investigate the effects of different design parameters on progressive collapse performance of beam-to-column connections, i.e., beam span-to-depth ratio, catenary mechanism, and connection robustness. The selected full-scale double-span assemblies consisted of fully rigid (welded flange-welded web, SidePlate), semi-rigid (flush end-plate, extended end-plate), and flexible connections (top and seat angle, web cleat). The test results, including load-deformation responses, development of the catenary mechanism, and connection robustness, are presented in detail. The finding of this research further enables a comprehensive comparison between different types of steel beam-to-column connections since the effects of span-to-depth ratio and beam sections were filtered out. Full article

(This article belongs to the Special Issue Buildings and Structures under Extreme Loads II)

► Show Figures

Journal Menu

Journal Browser

Buildings and Structures under Extreme Loads II

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (14 papers)

Editorial

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI