Submit to Applied Sciences Review for Applied Sciences Propose a Special Issue

Journal Menu

Journal Browser

Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy

Print Special Issue Flyer
Special Issue Editors
Special Issue Information
Keywords
Benefits of Publishing in a Special Issue
Published Papers

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Quantum Science and Technology".

Deadline for manuscript submissions: closed (5 July 2020) | Viewed by 33491

Share This Special Issue

Special Issue Editors

Dr. Angelo Sampaolo

E-Mail Website
Guest Editor

Polysense Lab – Dipartimento di Fisica, Politecnico di Bari, Bari, Italy
Interests: optoelectronics and nanotechnology, innovative optical gas sensor systems and their application to environmental monitoring, industrial process analysis, control, medical diagnostics

Prof. Dr. Hongpeng Wu

E-Mail Website
Guest Editor

Institute of Laser Spectroscopy, Shanxi University, Taiyuan 030006, China
Interests: photoacoustic spectrometry; photothermal spectroscopy; laser applications in environmental monitoring; industrial process control and medicine
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

The detection and measurement of trace gas concentrations is crucial for the understanding and monitoring of chemical and physical processes for a wide variety of applications, such as environmental monitoring, industrial process control, combustion processes, medicine, detection of toxic and flammable gases, as well as explosives. Laser-based spectroscopic techniques for trace gas detection are capable of high sensitivity and selectivity. These features are required in atmospheric science for the monitoring of different trace gas species including greenhouse gases and ozone, and in breath diagnostics to detect nitric oxide, ethane, ammonia and numerous other biomarkers. For the in-situ and real time measurements, the high sensitivity and selectivity must be combined with compactness and robustness of the sensors. In this landscape, photoacoustic and photothermal spectroscopy based on quartz tuning forks (QTF) have been proving through the last 15 years all the advantages of avoiding the use of optical detectors by employing acoustic resonators, which are immune to environmental noise and wavelength insensitive.

The present Special Issue was conceived with the aim of collecting and connecting all the provided contributions, works and analysis that are currently pushing quartz-enhanced photacoustic and phototermal spectroscopy to the state of art. The topics of focus will embrace the new generation of custom resonators, novel experimental approaches, smart solutions to real-world challenges, as well as theoretically-oriented issues, such as simulation of QTF vibrational dynamics, analysis of broadband absorbers, the effects of gas matrix changes, and gas relaxation dynamics.

Dr. Angelo Sampaolo
Dr. Hongpeng Wu
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

Quartz-enhanced photoacoustic spectroscopy
Quartz-enhanced photothermal spectroscopy
Quartz tuning forks
Trace gas detection
In-situ real-time applications

Benefits of Publishing in a Special Issue

Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (12 papers)

Download All Papers

Order results

Result details

Show export options Show export options

Select all

Export citation of selected articles as:

Editorial

Jump to: Research

3 pages, 169 KiB

Open AccessEditorial

Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy

by Hongpeng Wu and Angelo Sampaolo

Appl. Sci. 2022, 12(5), 2613; https://doi.org/10.3390/app12052613 - 3 Mar 2022

Viewed by 1572

Abstract

The development of innovative gas-sensing systems is fundamental in diverse research fields such as physics, chemistry, biology, medicine and environmental science [...] Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

Research

Jump to: Editorial

8 pages, 2051 KiB

Open AccessArticle

Quartz Enhanced Conductance Spectroscopy for Polymer Nano-Mechanical Thermal Analysis

by Shangzhi Li, Bo Sun, Zhijin Shang, Biao Li, Ruyue Cui, Hongpeng Wu and Lei Dong

Appl. Sci. 2020, 10(14), 4954; https://doi.org/10.3390/app10144954 - 18 Jul 2020

Cited by 3 | Viewed by 1962

Abstract

A fast and highly sensitive polymer nano-mechanical thermal analysis method for determining the melting temperature (T_m) of polymer microwires was proposed. In this method, a small-size, low-cost quartz tuning fork was used as a piezoelectric transducer to analyze the thermodynamics of polymer microwires at the nanogram level without changing its own properties. Due to the thin wire sample, which has a length of 1.2 mm and a diameter of ~5 µm, which is bridged across the prongs of the tuning fork, the nanogram-level sample greatly reduces the thermal equilibrium time for the measurement, resulting in a fast analysis for the melting temperature of the polymer sample. Compared with the traditional method, the analysis method based on the quartz enhanced conductivity spectrum (QECS) does not require annealing before measurement, which is an essential process for conventional thermal analysis to reduce the hardness, refine the grain, and eliminate the residual stress. In this work, the melting temperatures of three of the most commonly used polymers, namely polymers polymethyl methacrylate, high-density polyethylene, and disproportionated rosin, were obtained under the temperature from room temperature to >180 °C, proving the QECS method to be a useful tool for nano-mechanical thermal analysis. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

7 pages, 4271 KiB

Open AccessArticle

Improving the Signal to Noise Ratio of QTF Preamplifiers Dedicated for QEPAS Applications

by Piotr Z. Wieczorek, Tomasz Starecki and Frank K. Tittel

Appl. Sci. 2020, 10(12), 4105; https://doi.org/10.3390/app10124105 - 15 Jun 2020

Cited by 8 | Viewed by 2424

Abstract

The signal-to-noise ratio (SNR) is a major factor that limits the detection sensitivity of quartz-enhanced photoacoustic spectroscopy (QEPAS) sensors. The higher the electrical signal level compared to the noise amplitude is the lower the concentration of gases that can be detected. For this reason the preamplifier circuits used in QEPAS should be optimized for low-frequency narrow-band applications. Moreover, special care should be taken when choosing a particular operational amplifier in either a transimpedance or voltage (differential) configuration. It turns out that depending on the preamp topology different operational amplifier parameters should be carefully considered when a high SNR of the whole QEPAS system is required. In this article we analyzed the influence of the crucial parameters of low-noise operational preamplifiers used in QEPAS applications and show the resulting limitations of transimpedance and voltage configurations. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

9 pages, 1691 KiB

Open AccessArticle

Front-End Amplifiers for Tuning Forks in Quartz Enhanced PhotoAcoustic Spectroscopy

by Giansergio Menduni, Angelo Sampaolo, Pietro Patimisco, Marilena Giglio, Stefano Dello Russo, Andrea Zifarelli, Arianna Elefante, Piotr Z. Wieczorek, Tomasz Starecki, Vittorio M. N. Passaro, Frank K. Tittel and Vincenzo Spagnolo

Appl. Sci. 2020, 10(8), 2947; https://doi.org/10.3390/app10082947 - 24 Apr 2020

Cited by 21 | Viewed by 3238

Abstract

A study of the front-end electronics for quartz tuning forks (QTFs) employed as optoacoustic transducers in quartz-enhanced photoacoustic spectroscopy (QEPAS) sensing is reported. Voltage amplifier-based electronics is proposed as an alternative to the transimpedance amplifier commonly employed in QEPAS experiments. The possibility to use differential input/output configurations with respect to a single-ended configuration has also been investigated. Four different architectures have been realized and tested: a single-ended transimpedance amplifier, a differential output transimpedance amplifier, a differential input voltage amplifier and a fully differential voltage amplifier. All of these amplifiers were implemented in a QEPAS sensor operating in the mid-IR spectral range. Water vapor in ambient air has been selected as the target gas species for the amplifiers testing and validation. The signal-to-noise ratio (SNR) measured for the different configurations has been used to compare the performances of the proposed architectures. We demonstrated that the fully differential voltage amplifier allows for a nearly doubled SNR with respect to the typically used single-ended transimpedance amplifier. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

11 pages, 2231 KiB

Open AccessFeature PaperArticle

Quartz-Enhanced Photoacoustic Detection of Ethane in the Near-IR Exploiting a Highly Performant Spectrophone

by Fabrizio Sgobba, Giansergio Menduni, Stefano Dello Russo, Angelo Sampaolo, Pietro Patimisco, Marilena Giglio, Ezio Ranieri, Vittorio M. N. Passaro, Frank K. Tittel and Vincenzo Spagnolo

Appl. Sci. 2020, 10(7), 2447; https://doi.org/10.3390/app10072447 - 3 Apr 2020

Cited by 17 | Viewed by 2607

Abstract

In this paper the performances of two spectrophones for quartz-enhanced photoacoustic spectroscopy (QEPAS)-based ethane gas sensing were tested and compared. Each spectrophone contains a quartz tuning fork (QTF) acoustically coupled with a pair of micro-resonator tubes and having a fundamental mode resonance frequency of 32.7 kHz (standard QTF) and 12.4 kHz (custom QTF), respectively. The spectrophones were implemented into a QEPAS acoustic detection module (ADM) together with a preamplifier having a gain bandwidth optimized for the respective QTF resonance frequency. Each ADM was tested for ethane QEPAS sensing, employing a custom pigtailed laser diode emitting at ~1684 nm as the exciting light source. By flowing 1% ethane at atmospheric pressure, a signal-to-noise ratio of 453.2 was measured by implementing the 12.4 kHz QTF-based ADM, ~3.3 times greater than the value obtained using a standard QTF. The minimum ethane concentration detectable using a 100 ms lock-in integration time achieving the 12.4 kHz custom QTF was 22 ppm. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Graphical abstract

12 pages, 2884 KiB

Open AccessArticle

Narrowband Perfect Absorber Based on Dielectric-Metal Metasurface for Surface-Enhanced Infrared Sensing

by Guilian Lan, Zhongxie Jin, Jinpeng Nong, Peng Luo, Caicheng Guo, Zhengguo Sang, Lei Dong and Wei Wei

Appl. Sci. 2020, 10(7), 2295; https://doi.org/10.3390/app10072295 - 27 Mar 2020

Cited by 24 | Viewed by 4317

Abstract

We proposed a narrowband perfect absorber that was based on dielectric-metal metasurface for wide-band surface-enhanced infrared sensing. It is found that the narrowband perfect absorber can generate the hybrid guided modes with high quality-factor at infrared frequencies, which make the absorber highly sensitive to the surrounded analyte. Moreover, tuning the incident angle can actively modulate the resonant wavelength of absorber. Such an absorber with excellent features is employed to realize both refractive index sensing and infrared vibrational fingerprint sensing on a single substrate. It is demonstrated that a refractive index sensitivity of 1800 nm/RIU and figure of merit of 62 RIU⁻¹ can be obtained as the refractive index sensor. While, as a surface enhanced infrared absorption spectroscopy substrate, two closed vibrational modes of analyte with nanometer thick layers can be effectively identified and selectively detected with 50-folds enhancement by actively tuning the incident angle without any change in the structural parameters (periodicity, width, height, and refractive index of the grating) of the device after fabricating. Our study offers a promising approach for designing high-performance surface-enhanced infrared optical sensors in the infrared region. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

10 pages, 2992 KiB

Open AccessArticle

Quartz Enhanced Photoacoustic Detection Based on an Elliptical Laser Beam

by Zhijin Shang, Shangzhi Li, Hongpeng Wu and Lei Dong

Appl. Sci. 2020, 10(4), 1197; https://doi.org/10.3390/app10041197 - 11 Feb 2020

Cited by 4 | Viewed by 3234

Abstract

A quartz enhanced photoacoustic spectroscopy (QEPAS) sensor system based on an elliptical laser beam for trace gas detection was demonstrated. A Powell lens was exploited to shape the circular laser beam into an elliptical laser beam for the full utilization of the quartz tuning fork (QTF) prong spacing. Based on the finite element modeling (FEM) simulation software COMSOL, the distribution of acoustic pressure on QTF prongs with different beam shapes was simulated theoretically. The experimental results showed that the QEPAS signal based on the elliptical laser beam had a 1.4-fold improvement compared with the circular laser beam, resulting in a minimum detection limit of 418.6 ppmv and the normalized noise equivalent absorption (NNEA) of 1.51 × 10⁻⁶ cm⁻¹ W/√Hz at atmospheric pressure. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

12 pages, 2231 KiB

Open AccessArticle

Anomalous Humidity Dependence in Photoacoustic Spectroscopy of CO Explained by Kinetic Cooling

by Jakob Hayden, Bettina Baumgartner and Bernhard Lendl

Appl. Sci. 2020, 10(3), 843; https://doi.org/10.3390/app10030843 - 24 Jan 2020

Cited by 16 | Viewed by 3157

Abstract

Water affects the amplitude of photoacoustic signals from many gas phase molecules. In quartz-enhanced photoacoustic (QEPAS) measurements of CO excited at the fundamental vibrational resonance of CO, the photoacoustic signal decreases with increasing humidity, reaches a pronounced minimum at ~0.19%_V, and increases with humidity for higher water contents. This peculiar trend is explained by competing endothermal and exothermal pathways of the vibrational relaxation of CO in N₂ and H₂O. Near-resonant vibrational–vibrational transfer from CO to N₂, whose vibrational frequency is 188 cm⁻¹ higher than in CO, consumes thermal energy, yielding a kinetic cooling effect. In contrast, vibrational relaxation via H₂O is fast and exothermal, and hence counteracts kinetic cooling, explaining the observed trend. A detailed kinetic model for collisional relaxation of CO in N₂ and H₂O is presented. Simulations using rate constants obtained from literature were performed and compared to humidity dependent QEPAS experiments at varying pressure. Agreement between the experiments and simulations confirmed the validity of the model. The kinetic model can be used to identify optimized experimental conditions for sensing CO and can be readily adapted to include further collision partners. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

8 pages, 1745 KiB

Open AccessArticle

Phase Optimized Photoacoustic Sensing of Gas Mixtures

by Mario Mordmueller, Simon Edelmann, Markus Knestel, Wolfgang Schade and Ulrike Willer

Appl. Sci. 2020, 10(2), 438; https://doi.org/10.3390/app10020438 - 7 Jan 2020

Cited by 7 | Viewed by 2247

Abstract

In this paper, we report on the progress of the auto-triggered quartz-enhanced photoacoustic spectroscopy (QEPAS) technique which operates without external frequency generators and ensures permanent locking to the current resonance frequency of the tuning fork. This is obtained by incorporating the tuning fork in an oscillator circuit that autonomously oscillates at the present resonance frequency that shifts with changing environmental conditions, e.g., density and viscosity of the surrounding gas, temperature, and pressure. Both, the oscillation amplitude as well as the frequency can be read from the oscillator circuit. The photoacoustic signal appears as an offset of the electrically induced signal amplitude. Since the sum amplitude depends on the phase relation between the electrical and photoacoustic driving forces, the phase is permanently modulated, enabling the extraction of the photoacoustic component by use of a second lock-in amplifier stage which is being referenced with the phase modulation frequency. The functionality of this method is demonstrated for methane detection in a carbon dioxide atmosphere in a concentration range from 0 to 100% and ammonia in synthetic air employing a pulsed mid infrared QCL around 1280 cm⁻¹. The gas mixtures are motivated by the demands in biogas-analysis. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

11 pages, 2415 KiB

Open AccessArticle

Near-Infrared Quartz-Enhanced Photoacoustic Sensor for H₂S Detection in Biogas

by Fagang Zhao, Yutong Gao, Lin Yang, Yuqing Yan, Jiashi Li, Jingrong Ren, Stefano dello Russo, Andrea Zifarelli, Pietro Patimisco, Hongpeng Wu and Lei Dong

Appl. Sci. 2019, 9(24), 5347; https://doi.org/10.3390/app9245347 - 6 Dec 2019

Cited by 12 | Viewed by 2414

Abstract

A quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor for H₂S detection operating in near-infrared spectral range is reported. The optical source is an erbium-doped fiber amplified laser with watt-level optical power. The QEPAS spectrophone is composed of a quartz tuning fork with a resonance frequency of 7.2 kHz, a quality factor of 8500, and a distance between prongs of 800 µm, and two tubes with a radius of 1.3 mm and a length of 23 mm acting as an organ pipe resonator. With this spectrophone geometry, the photothermal noise contribution of the spectrophone was removed and the theoretical thermal noise level was achieved. The position of both tubes with respect to custom quartz tuning fork has been investigated as a function of signal amplitude, Q-factor, and noise of the QEPAS sensor when a high-power laser was used. Benefit from the linearity of the QEPAS signal to the excitation laser power, a detection sensitivity of 330 ppb for H₂S detection was achieved at atmospheric pressure and room temperature, when the laser power was 1.6 W and the signal integration time was set to 300 ms, corresponding to a normalized noise equivalent absorption of 3.15 × 10⁻⁹ W cm⁻¹/(Hz)^1/2. The QEPAS sensor was then validated by measuring H₂S in a biogas sample. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

12 pages, 3400 KiB

Open AccessArticle

Precise Photon Correlation Measurement of a Chaotic Laser

by Xiaomin Guo, Chen Cheng, Tong Liu, Xin Fang and Yanqiang Guo

Appl. Sci. 2019, 9(22), 4907; https://doi.org/10.3390/app9224907 - 15 Nov 2019

Cited by 3 | Viewed by 2595

Abstract

The second order photon correlation g⁽²⁾(τ) of a chaotic optical-feedback semiconductor laser is precisely measured using a Hanbury Brown–Twiss interferometer. The accurate g⁽²⁾(τ) with non-zero delay time is obtained experimentally from the photon pair time interval distribution through a ninth-order self-convolution correction. The experimental results agree well with the theoretical analysis. The relative error of g⁽²⁾(τ) is no more than 5‰ within 50 ns delay time. The bunching effect and coherence time of the chaotic laser are measured via the precise photon correlation technique. This technique provides a new tool to improve the accuracy of g⁽²⁾(τ) measurement and boost applications of quantum statistics and correlation. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Figure 1

8 pages, 1457 KiB

Open AccessCommunication

Quartz-Enhanced Photothermal-Acoustic Spectroscopy for Trace Gas Analysis

by Huadan Zheng, Haoyang Lin, Lei Dong, Zhao Huang, Xiaohang Gu, Jieyuan Tang, Linpeng Dong, Wenguo Zhu, Jianhui Yu and Zhe Chen

Appl. Sci. 2019, 9(19), 4021; https://doi.org/10.3390/app9194021 - 26 Sep 2019

Cited by 14 | Viewed by 2726

Abstract

A crystal quartz tuning fork (QTF) was used as a detector to collect and amplify laser-induced photoacoustic and photothermal waves simultaneously for trace chemical analysis. A wavelength modulation technique was applied to the proposed quartz-enhanced photothermal-acoustic spectroscopy (QEPTAS) to improve the detection signal-to-noise ratio. The QTF detector was exposed to the illumination of a near-infrared distributed feedback laser at distances of 1 m and 2 m to evaluate the QEPTAS sensor performance. The QEPTAS sensor performance was determined by detecting water vapor in ambient air using a near-infrared distributed feedback laser with a power of ~10 mW and a wavelength of 1.39 μm. With an optimized modulation depth of 0.47 cm⁻¹, the normalized noise equivalent absorption (NNEA) coefficients of 8.4 × 10⁻⁷ W·cm⁻¹·Hz^−1/2 and 3.7 × 10⁻⁶ W·cm⁻¹·Hz^−1/2 were achieved for a distance of 1 m and 2 m, respectively. The developed QEPTAS technique reduces the requirements for laser beam quality, resulting in a simple but robust sensor structure and demonstrates the ability of remote sensing of gas concentrations. Full article

(This article belongs to the Special Issue Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy)

► Show Figures

Journal Menu

Journal Browser

Quartz-Enhanced Photoacoustic and Photothermal Spectroscopy

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (12 papers)

Editorial

Research

Further Information

Guidelines

MDPI Initiatives

Follow MDPI