Submit to Materials Review for Materials Propose a Special Issue

Journal Menu

Journal Browser

► Journal Browser

Environmentally-Friendly Materials in Wastewater Treatment

Print Special Issue Flyer
Special Issue Editors
Special Issue Information
Keywords
Benefits of Publishing in a Special Issue
Published Papers

A special issue of Materials (ISSN 1996-1944). This special issue belongs to the section "Green Materials".

Deadline for manuscript submissions: closed (10 July 2023) | Viewed by 26318

Share This Special Issue

Special Issue Editors

Dr. Inga Zinicovscaia

E-Mail Website
Guest Editor

Department of Nuclear Physics, Joint Institute for Nuclear Research, Joliot-Curie 6, 141980 Dubna, Russia
Interests: neutron activation analysis; food quality; nanotoxicology; soil and water bioremediation
Special Issues, Collections and Topics in MDPI journals

Prof. Dr. Magdalena Balintova

E-Mail Website
Guest Editor

Institute for Sustainable and Circular Construction, Faculty of Civil Engineering, Technical University of Kosice, Košice, Slovakia
Interests: wastewater treatment; acid mine drainage; heavy metal removal; sorption methods; environmental impact assessment
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

At present, thousands of tonnes of industrial and domestic wastewater are released in natural water bodies, contributing to their pollution with inorganic, organic, and radioactive compounds. Sorption is considered to be one of the most efficient wastewater treatment techniques. Every day, new sorbents are elaborated. At the same time, it is important to develop materials which meet several criteria, such as high removal efficiency, environmental safety, and multiple use.

This Special Issue will provide readers with up-to-date information on the recent progress in the application of environmentally friendly materials in wastewater purification.

Contributing papers are solicited in the following areas:

Environmentally friendly materials in metals removal;
Environmentally friendly materials in organic pollutants removal;
Environmentally friendly materials in radionuclides removal;
Environmentally friendly materials in complex wastewater treatment.

Dr. Inga Zinicovscaia
Dr. Magdalena Balintova
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Materials is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

metals
organic pollutants
radionuclides
new materials
analytical techniques
bioremediation
wastewater treatment
industrial effluents
domestic wastewater

Benefits of Publishing in a Special Issue

Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (12 papers)

Download All Papers

Order results

Result details

Show export options Show export options

Select all

Export citation of selected articles as:

Editorial

Jump to: Research

5 pages, 201 KiB

Open AccessEditorial

Environmentally-Friendly Materials in Wastewater Treatment

by Inga Zinicovscaia and Magdalena Balintova

Materials 2023, 16(18), 6181; https://doi.org/10.3390/ma16186181 - 13 Sep 2023

Cited by 1 | Viewed by 1133

Abstract

The intensive development of industry and agriculture caused by high population growth results in the release of large volumes of wastewater containing organic and inorganic pollutants into the environment [...] Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

Research

Jump to: Editorial

15 pages, 3541 KiB

Open AccessArticle

Green Synthesis of a Carbon Quantum Dots-Based Superhydrophobic Membrane for Efficient Oil/Water Separation

by Rasmiah Saad Almufarij and Mohamed Elshahat Mohamed

Materials 2023, 16(15), 5456; https://doi.org/10.3390/ma16155456 - 3 Aug 2023

Cited by 9 | Viewed by 1838

Abstract

The efficient separation of oil and water is a significant challenge worldwide due to the increasing frequency of industrial oily wastewater. Previous work by our group utilizes biological metal–organic framework-based superhydrophobic (S.P) textile fabric for oil/water separation. However, this system is limited due to the low mechanical stability, so there is a need for producing a more robust S.P membrane for oil/water separation. In this study, we report on the synthesis of carbon quantum dots (CQD) from banana leaves via a hydrothermal process and their application in producing a robust S.P coating on textile fabric for oil/water separation. The CQDs were characterized using various techniques including TEM, XRD, absorbance spectroscopy, and the BET method. The TEM images showed that the CQDs were circular in shape with a size of 4.4 nm, while the XRD micrograph indicated that the CQDs were crystalline in nature. The UV–vis graph showed a peak at a wavelength of 278 nm, suggesting strong absorption in the ultraviolet region. The BET-specific surface area of the prepared CQDs is 845 m²/g, with a pore volume of 0.33 cm³/g, and a mean pore diameter of 1.62 nm. We examined the surface wettability, morphology, composition, oil absorption capacity, oil/water separation performance, flux rate, chemical stability, and mechanical stability of the S.P membrane. Our findings indicate that the developed CQD-based S.P membrane possesses excellent S.P properties, displaying high water contact angles of 163° and low water sliding angles of 1°. The membrane demonstrated superior oil absorption capacity, separation efficiency, and flux rate towards three different oils—petroleum ether, n-hexane, and silicone oil. Petroleum ether has the highest separation efficiency (99.5%), and flux rate (13,500 L m⁻² h⁻¹), while silicone oil has the lowest. However, silicone oil has the highest absorption capacity (218.9 g/g) and petroleum ether has the lowest (194.8 g/g). For the absorption capacity and separation efficiency, a one-way ANOVA test was conducted. The statistical analyses revealed significant differences in absorption capacity and separation efficiency for the three oils, highlighting the efficacy of the superhydrophobic membrane for tailored oil/water separation. Additionally, the S.P membrane exhibited good mechanical (the membrane maintains its superhydrophobicity until an abrasion length of 850 cm) and chemical stability (the membrane maintains its superhydrophobicity in pH range 1–13), withstanding abrasion and immersion in solutions of varying pH values. The CQD-based S.P membrane shows great potential as a promising material for oil/water separation applications, with excellent performance and stability under various environmental conditions. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

17 pages, 4118 KiB

Open AccessArticle

Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 toward Indium Ions

by Inga Zinicovscaia, Nikita Yushin, Doina Humelnicu, Dmitrii Grozdov, Maria Ignat and Ionel Humelnicu

Materials 2023, 16(8), 3201; https://doi.org/10.3390/ma16083201 - 18 Apr 2023

Cited by 4 | Viewed by 1443

Abstract

Indium is an extremely important element for industry that is distributed in the Earth’s crust at very low concentrations. The recovery of indium by silica SBA-15 and titanosilicate ETS-10 was investigated at different pH levels, temperatures, times of contact and indium concentrations. A maximum removal of indium by ETS-10 was achieved at pH 3.0, while by SBA-15 it was within the pH range of 5.0–6.0. By studying kinetics, the applicability of the Elovich model for the description of indium adsorption on silica SBA-15 was shown, while its sorption on titanosilicate ETS-10 fitted well with the pseudo-first-order model. Langmuir and Freundlich adsorption isotherms were used to explain the equanimity of the sorption process. The Langmuir model showed its applicability for the explanation of the equilibrium data obtained for both sorbents, the maximum sorption capacity obtained using the model constituted 366 mg/g for titanosilicate ETS-10 at pH 3.0, temperature 22 °C and contact time 60 min, and 2036 mg/g for silica SBA-15 at pH 6.0, temperature 22 °C and contact time 60 min. Indium recovery was not dependent on the temperature and the sorption process was spontaneous in nature. The interactions between the indium sulfate structure and surfaces of adsorbents were investigated theoretically using the ORCA quantum chemistry program package. The spent SBA-15 and ETS-10 could be easily regenerated by using 0.01 M HCl and reused with up to 6 cycles of adsorption/desorption with a decrease in the removal efficiency between 4% and 10% for SBA-15 and 5% and 10% for ETS-10, respectively. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Graphical abstract

12 pages, 4389 KiB

Open AccessArticle

Zero-Waste Approach for Heavy Metals’ Removal from Water with an Enhanced Multi-Stage Hybrid Treatment System

by Danijela Urbancl, Darko Goricanec and Marjana Simonic

Materials 2023, 16(5), 1816; https://doi.org/10.3390/ma16051816 - 22 Feb 2023

Cited by 2 | Viewed by 1455

Abstract

The aim of the work was to develop a zero-waste technological solution for hybrid removal of heavy metals from river sediments. The proposed technological process consists of sample preparation, sediment washing (a physicochemical process for sediment purification), and purification of the wastewater produced as a by-product. A suitable solvent for heavy metal washing and the effectiveness of heavy metal removal were determined by testing EDTA and citric acid. The process for removing heavy metals from the samples worked best with citric acid when the 2% sample suspension was washed over a 5-h period. The method was chosen of the adsorption of heavy metals from the exhausting washing solution on natural clay. Analyses were performed of the three main heavy metals, Cu(II), Cr(VI), and Ni(II), in the washing solution. Based on the laboratory experiments, a technological plan was prepared for the purification of 100,000 tons of material per year. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

18 pages, 4504 KiB

Open AccessArticle

Performance of an Innovative Low-Cost Recycled Filling (LCRF) in Anaerobic Treatment of Dairy Effluent—A Pilot-Scale Study

by Marcin Zieliński, Marcin Dębowski and Joanna Kazimierowicz

Materials 2022, 15(21), 7815; https://doi.org/10.3390/ma15217815 - 5 Nov 2022

Cited by 4 | Viewed by 1563

Abstract

The rapid growth in dairy production leads to increasing outputs of high-load effluent, necessitating new methods of treating such waste. Anaerobic processes have been increasingly popular but are hamstrung by limited nutrient removal efficiency. The aim of the present study was to investigate whether low-cost recycled filling (LCRF) improves the anaerobic treatment of dairy effluent. The addition of LCRF was found to increase both COD removal (86.1 ± 2.6%–92.8 ± 1.6%) and P_tot. removal (22.1 ± 3.5% to 36.9 ± 4.6%) from the wastewater. The LCRF ensured near-neutral pH and stabilized the structure of the anaerobic microbe community (including Archaea) across all pollutant loads tested. This translated to efficient biogas production and high methane content in the LCRF reactors, peaking at 0.35 ± 0.01 m³/kg COD_removed and 68.2 ± 0.6% (respectively) in the best-performing variant. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

15 pages, 4472 KiB

Open AccessArticle

Application of Cyanobacteria Arthospira platensis for Bioremediation of Erbium-Contaminated Wastewater

by Nikita Yushin, Inga Zinicovscaia, Liliana Cepoi, Tatiana Chiriac, Ludmila Rudi and Dmitrii Grozdov

Materials 2022, 15(17), 6101; https://doi.org/10.3390/ma15176101 - 2 Sep 2022

Cited by 8 | Viewed by 2015

Abstract

Erbium belongs to rare earth elements critical for industry, especially nuclear technology. Cyanobacteria Arthospira platensis was used for Er(III) removal from wastewater by applying biosorption and bioaccumulation processes. The influence of pH, Er(III) concentration, contact time and temperature on the biosorption capacity of Arthospira platensis was determined. The optimal conditions for Er(III) removal were defined as pH 3.0, time 15 min and temperature 20 °C, when 30 mg/g of Er(III) were removed. The kinetics of the process was better described by the pseudo-first-order model, while equilibrium fitted to the Freundlich model. In bioaccumulation experiments, the uptake capacity of biomass and Er(III) effect on biomass biochemical composition were assessed. It was shown that Er(III) in concentrations 10–30 mg/L did not affect the content of biomass, proteins, carbohydrate and photosynthetic pigments. Its toxicity was expressed by the reduction of the lipids content and growth of the level of malonic dialdehyde. Biomass accumulated 45–78% of Eu(III) present in the cultivation medium. Therefore, Arthospira platensis can be considered as a safe and efficient bioremediator of erbium contaminated environment. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

15 pages, 2323 KiB

Open AccessArticle

Anaerobic Reactor Filling for Phosphorus Removal by Metal Dissolution Method

by Marcin Dębowski, Marcin Zieliński and Joanna Kazimierowicz

Materials 2022, 15(6), 2263; https://doi.org/10.3390/ma15062263 - 18 Mar 2022

Cited by 8 | Viewed by 1607

Abstract

A commonly indicated drawback of anaerobic wastewater treatment is the low effectiveness of phosphorus removal. One possibility to eliminate this disadvantage is the implementation of active fillings that contain admixtures of metals, minerals, or other elements contributing to wastewater treatment intensification. The aim of the research was to present an active filling produced via microcellular extrusion technology, and to determine its properties and performance in anaerobic wastewater treatment. The influence of copper and iron admixtures on the properties of the obtained porous extrudate in terms of its functional properties was also examined. The Barus effect increased with the highest content of the blowing agent in the material from 110 ± 12 to 134 ± 14. The addition of metal powders caused an increase in the extrudate density. The modification of PVC resulted in the highest porosity, amounting to 47.0% ± 3.2%, and caused the tensile strength to decrease by about 50%. The determined values ranged from 211.8 ± 18.3 MPa to 97.1 ± 10.0 MPa. The use of the filling in anaerobic rectors promoted COD removal, intensified biogas production, and eliminated phosphorus with an efficiency of 64.4% to 90.7%, depending on the type of wastewater and applied technological parameters. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

20 pages, 3337 KiB

Open AccessArticle

Biochar from Wood Chips and Corn Cobs for Adsorption of Thioflavin T and Erythrosine B

by Martin Pipíška, Eva Klára Krajčíková, Milan Hvostik, Vladimír Frišták, Libor Ďuriška, Ivona Černičková, Mária Kaňuchová, Pellegrino Conte and Gerhard Soja

Materials 2022, 15(4), 1492; https://doi.org/10.3390/ma15041492 - 17 Feb 2022

Cited by 27 | Viewed by 3608

Abstract

Biochars from wood chips (WC) and corn cobs (CC) were prepared by slow pyrolysis and used for sorption separation of erythrosine B (EB) and thioflavin T (TT) in batch experiments. Biochar-based adsorbents were extensively characterized using FTIR, XRD, SEM-EDX, and XPS techniques. The kinetics studies revealed that adsorption on external surfaces was the rate-limiting step for the removal of TT on both WC and CC biochar, while intraparticle diffusion was the rate-limiting step for the adsorption of EB. Maximal experimental adsorption capacities Q_maxexp of TT reached 182 ± 5 (WC) and 45 ± 2 mg g⁻¹ (CC), and EB 12.7 ± 0.9 (WC) and 1.5 ± 0.4 mg g⁻¹ (CC), respectively, thereby indicating a higher affinity of biochars for TT. The adsorption mechanism was found to be associated with π-π interaction, hydrogen bonding, and pore filling. Application of the innovative dynamic approach based on fast-field-cycling NMR relaxometry indicates that variations in the retention of water-soluble dyes could be explained by distinct water dynamics in the porous structures of WC and CC. The obtained results suggest that studied biochars will be more effective in adsorbing of cationic than anionic dyes from contaminated effluents. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

14 pages, 27740 KiB

Open AccessArticle

Adsorption of Pollutants from Colored Wastewaters after Natural Wool Dyeing

by Alenka Ojstršek, Primož Vouk and Darinka Fakin

Materials 2022, 15(4), 1488; https://doi.org/10.3390/ma15041488 - 16 Feb 2022

Cited by 7 | Viewed by 2861

Abstract

The presented study assesses the efficiency of selected adsorbents, zeolite 4A in two particle sizes and pelletized activated carbon (AC), for the potential removal of color, chemical oxygen demand (COD), total organic carbon (TOC) and metals from wastewaters after natural wool dyeing. Firstly, the natural coloring compounds were extracted from dried common walnut (Juglans regia) leaves and used further for exhaustion dyeing of wool fibers, together with three different metallic salts in two concentrations (meta-mordanting). Effluents with higher mordant concentration were additionally treated according to a shake-flask adsorption experiment. The obtained results revealed efficient removal of exceeded metallic ions by zeolite (up to 94.7%), on account of their superior ion exchange capability as compared to AC. The zeolites also reduced turbidity and electrical conductivity significantly. On the other hand, AC was more efficient for the reduction in organic pollution, COD up to 96% and TOC up to 95%, due to its higher specific surface area and total pore volume, and, thus, higher potential for adsorption of different compounds in comparison to 4A. All three proposed adsorbents lowered wastewaters’ coloration remarkably, up to 78% (AC) and up to 71% (4A), depending on the type of effluent/mordant and inspected wavelength; although, the spectral absorbance coefficient (SAC) values remained highly above the limit values for discharge of wastewaters into watercourses. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

21 pages, 12124 KiB

Open AccessArticle

Facile Fabrication of Novel NiFe₂O₄@Carbon Composites for Enhanced Adsorption of Emergent Antibiotics

by Van Tan Lam, Thi Cam Quyen Ngo and Long Giang Bach

Materials 2021, 14(21), 6710; https://doi.org/10.3390/ma14216710 - 8 Nov 2021

Cited by 10 | Viewed by 2411

Abstract

Water purification is becoming one of the most pertinent environmental issues throughout the world. Among common types of water pollution involving heavy metals, pharmaceutical drugs, textile dyes, personal care products, and other persistent organic pollutants, the pollution of antibiotic drugs is increasingly emerging due to their adverse effects on microorganisms, aquatic animals, and human health. Therefore, the treatment of such contaminants is very necessary to reduce the concentration of antibiotic pollutants to permissible levels prior to discharge. Herein, we report the use of NiFe₂O₄@C composites from a bimetallic-based metal-organic framework Ni-MIL-88B(Fe) for removal of ciprofloxacin (CFX) and tetracycline (TCC). The effect of production temperatures (600–900 °C), solution pH (2–10), NiFe₂O₄@C dose (0.05–0.2 g/L), concentration of antibiotics (10–60 mg/L), and uptake time (0–480 min) was investigated systematically. Response surface methodology and central composite design were applied for quadratic models to discover optimum conditions of antibiotic adsorption. With high coefficients of determination (R² = 0.9640–0.9713), the proposed models were significant statistically. Under proposed optimum conditions, the adsorption capacity for CFX and TCC were found at 256.244, and 105.38 mg/g, respectively. Recyclability study was employed and found that NiFe₂O₄@C-900 could be reused for up to three cycles, offering the potential of this composite as a good adsorbent for removal of emergent antibiotics. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

19 pages, 5396 KiB

Open AccessArticle

Assessment of the Different Type of Materials Used for Removing Phosphorus from Wastewater

by Claudiu Cepan, Adina-Elena Segneanu, Oana Grad, Maria Mihailescu, Melinda Cepan and Ioan Grozescu

Materials 2021, 14(16), 4371; https://doi.org/10.3390/ma14164371 - 4 Aug 2021

Cited by 10 | Viewed by 2848

Abstract

Reducing the costs associated with water management, improving water quality and the environment are fundamental requirements of sustainable development. Maintaining the optimal level of phosphorus has a direct impact on water quality and the biological system. Current methods used in tertiary wastewater treatment for phosphorus removal present several disadvantages that influence the final water processing cost. Therefore, it is essential for water quality and food safety to develop ecological, cheap and highly efficient materials. This study reported the first comparative assessment of three different types of materials (magnetic, semiconductors and composite) as environmentally friendly, cheap adsorbents for phosphorus removal from wastewater. Several experiments were done to investigate the influence of adsorbent type, dosage and contact time on the efficiency of the processes. The adsorption process was fast and equilibrium was reached within 150 min. We found that the phosphorus adsorption efficiency on of these materials was higher than the chemical method. The obtained results indicated that specific surface area directly influences the performance of the adsorption process. EDS analysis was used to analyze adsorbents composition and analyze the type and content of elements in the substrate before and after reaction with wastewater. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Figure 1

17 pages, 29943 KiB

Open AccessEditor’s ChoiceArticle

Zinc-Containing Effluent Treatment Using Shewanella xiamenensis Biofilm Formed on Zeolite

by Inga Zinicovscaia, Nikita Yushin, Dmitrii Grozdov, Daler Abdusamadzoda, Alexey Safonov and Elena Rodlovskaya

Materials 2021, 14(7), 1760; https://doi.org/10.3390/ma14071760 - 2 Apr 2021

Cited by 14 | Viewed by 2115

Abstract

The sorption properties of Shewanella xiamenensis biofilm formed on zeolite (mineral-organic sorbent) as a sorbent have been investigated aiming to determine its suitability for complex zinc-containing effluent treatment. The optimum conditions for metal sorption from synthetic solutions were evaluated by changing the pH, zinc concentration, temperature, and time of sorption. The highest removal of metal ions was attained at pH range 3.0–6.0 within 60–150 min of sorbent-sorbate contact. The results obtained from the equilibrium studies were described using the Langmuir, Freundlich, and Temkin models. Maximum sorption capacity of the sorbent calculated from the Langmuir model changed from 3.4 to 6.5 mg/g. High coefficient of determination values calculated for pseudo-second-order and Elovich models indicate the predominant role of chemisorption in metal removal. Gibbs energy and ∆H° values point at the spontaneous and endothermic character of the sorption. The effect of pH and biosorbent mass on Zn(II) sorption from industrial effluent with an initial Zn(II) concentration of 52.8 mg/L was tested. Maximum removal of zinc ions (85%) was achieved at pH 6.0 by applying a two-step treatment system. Full article

(This article belongs to the Special Issue Environmentally-Friendly Materials in Wastewater Treatment)

► Show Figures

Journal Menu

Journal Browser

Environmentally-Friendly Materials in Wastewater Treatment

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (12 papers)

Editorial

Research

Further Information

Guidelines

MDPI Initiatives

Follow MDPI