Molecules

Research

Jump to: Review

10 pages, 5139 KiB

Open AccessArticle

Zinc Hydroxystannate/Carbon Nanotube Hybrids as Flame Retardant and Smoke Suppressant for Epoxy Resins

by Congling Shi, Mei Wan, Xiaodong Qian, Jingyun Jing and Keqing Zhou

Molecules 2023, 28(19), 6820; https://doi.org/10.3390/molecules28196820 - 27 Sep 2023

Cited by 3 | Viewed by 1064

Abstract

Novel hybrid flame retardants containing zinc hydroxystannate and carbon nanotubes (ZHS-CNTs) were synthesized using the coprecipitation method, and the structure and morphology of ZHS−CNTs were investigate using an X-ray powder diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and thermogravimetric analyzer [...] Read more.

Novel hybrid flame retardants containing zinc hydroxystannate and carbon nanotubes (ZHS-CNTs) were synthesized using the coprecipitation method, and the structure and morphology of ZHS−CNTs were investigate using an X-ray powder diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and thermogravimetric analyzer (TGA). Then, the ZHS, CNTs and ZHS−CNTs were incorporated into EP, respectively, and the flame-retardant and smoke inhibition performance of the composites were compared and studied. Among the three composites, the EP/ZHS-CNT composites have the highest improvements on the fire resistance and smoke inhibition properties. With only 2.0 wt.% ZHS-CNT hybrids, the pHRR of EP/ZHS-CNT composite materials is reduced by 34.2% compared with EP. Moreover, the release of toxic gases including CO, CO₂ and SPR from the composites was also effectively inhibited. The mechanisms of flame retardant and smoke inhibition were investigated and the improved properties were generally ascribed to the synergistic flame-retardant effects between ZHS and CNTs, the catalyzing effect of ZHS and the stable network structure of CNTs. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

13 pages, 5804 KiB

Open AccessArticle

Study on the Flame Retardancy of Rigid Polyurethane Foam with Phytic Acid-Functionalized Graphene Oxide

by Xuan Zhou, Feng Jiang, Zhiyu Hu, Faqun Wu, Ming Gao, Zhihua Chai, Yan Wang, Xiaoyu Gu and Yanxia Wang

Molecules 2023, 28(17), 6267; https://doi.org/10.3390/molecules28176267 - 27 Aug 2023

Cited by 5 | Viewed by 1705

Abstract

A rigid polyurethane foam (RPUF) composite was prepared by compounding phytic acid (PA)-functionalized Graphite oxide (PA-GO) with flame-retardant poly (Ammonium phosphate) (APP) and expandable graphite (EG). The effects of PA-GO on the thermal, flame-retardant, and mechanical properties of RPUF were studied using a [...] Read more.

A rigid polyurethane foam (RPUF) composite was prepared by compounding phytic acid (PA)-functionalized Graphite oxide (PA-GO) with flame-retardant poly (Ammonium phosphate) (APP) and expandable graphite (EG). The effects of PA-GO on the thermal, flame-retardant, and mechanical properties of RPUF were studied using a thermogravimetric analyzer, a limiting oxygen index (LOI) tester, a UL-94 vertical combustion tester, a cone calorimeter, scanning electron microscopy, and a universal tensile testing machine. The results indicated that there was a significant synergistic flame-retardant effect between PA-GO and the intumescent flame retardants (IFR) in the RPUF matrix. Compared with RPUF-1, the addition of 0.3 wt% PA-GO could increase LOI from 25.7% to 26.5%, increase UL-94 rating from V-2 to V-0, and reduce the peak heat release rate (PHRR) and total heat release rate (THR) by 28.5% and 22.2%, respectively. Moreover, the amount of residual char increased from 22.2 wt% to 24.6 wt%, and the char layer was continuous and dense, with almost no holes. Meanwhile, the loss of mechanical properties was apparently lightened. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

19 pages, 4173 KiB

Open AccessArticle

Simultaneous Enhancement of Flame Resistance and Antimicrobial Activity in Epoxy Nanocomposites Containing Phosphorus and Silver-Based Additives

by Tăchiță Vlad-Bubulac, Corneliu Hamciuc, Diana Serbezeanu, Ana-Maria Macsim, Gabriela Lisa, Ion Anghel, Dana-Maria Preda, Yuri Kalvachev and Cristina Mihaela Rîmbu

Molecules 2023, 28(15), 5650; https://doi.org/10.3390/molecules28155650 - 26 Jul 2023

Cited by 3 | Viewed by 1355

Abstract

The design and manufacture of innovative multifunctional materials possessing superior characteristics, quality and standards, rigorously required for future development of existing or emerging advanced technologies, is of great importance. These materials should have a very low degree of influence (or none) on the [...] Read more.

The design and manufacture of innovative multifunctional materials possessing superior characteristics, quality and standards, rigorously required for future development of existing or emerging advanced technologies, is of great importance. These materials should have a very low degree of influence (or none) on the environmental and human health. Adjusting the properties of epoxy resins with organophosphorus compounds and silver-containing additives is key to the simultaneous improvement of the flame-resistant and antimicrobial properties of advanced epoxy-based materials. These environmentally friendly epoxy resin nanocomposites were manufactured using two additives, a reactive phosphorus-containing bisphenol derived from vanillin, namely, (4-(((4-hidroxyphenyl)amino)(6-oxido-6H-dibenzo[c,e][1,2]oxaphosphinin-6-yl)methyl)-2-methoxyphenyl) phenylphosphonate (BPH), designed as both cross-linking agent and a flame-retardant additive for epoxy resin; and additional silver-loaded zeolite L nanoparticles (Ze–Ag NPs) used as a doping additive to impart antimicrobial activity. The effect of BPH and Ze–Ag NPs content on the structural, morphological, thermal, flame resistance and antimicrobial characteristics of thermosetting epoxy nanocomposites was investigated. The structure and morphology of epoxy nanocomposites were investigated via FTIR spectroscopy and scanning electron microscopy (SEM). In general, the nanocomposites had a glassy and homogeneous morphology. The samples showed a single glass transition temperature in the range of 166–194 °C and an initiation decomposition temperature in the range of 332–399 °C. The introduction of Ze–Ag NPs in a concentration of 7–15 wt% provided antimicrobial activity to epoxy thermosets. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Graphical abstract

12 pages, 3055 KiB

Open AccessArticle

Bio-Inspired Iron-Loaded Polydopamine Functionalized Montmorillonite as an Environmentally Friendly Flame Retardant for Epoxy Resin

by Jiashui Lan, Dingsi Li, Wei Zhong, Wenhui Luo, Huagui Zhang and Mingfeng Chen

Molecules 2023, 28(14), 5354; https://doi.org/10.3390/molecules28145354 - 12 Jul 2023

Cited by 3 | Viewed by 1405

Abstract

As an important thermosetting material, flame-retardant epoxy resin has various applications in the aerospace, chemical, and electronics industry, and other fields. However, the flame retardancy of epoxy resins is often improved at the expense of mechanical performance. The contradiction between flame retardancy and [...] Read more.

As an important thermosetting material, flame-retardant epoxy resin has various applications in the aerospace, chemical, and electronics industry, and other fields. However, the flame retardancy of epoxy resins is often improved at the expense of mechanical performance. The contradiction between flame retardancy and mechanical properties seriously impedes the practical applications of epoxy resin (EP). Herein, iron-loaded polydopamine functionalized montmorillonite (D-Mt-Fe³⁺), which was prepared by dopamine, iron chloride and montmorillonite in an aqueous solution, was introduced to prepare iron-loaded polydopamine functionalized montmorillonite/epoxy resin composites (D-Mt-Fe³⁺/EP). As expected, D-Mt-Fe³⁺/EP-10 with 10 phr of D-Mt-Fe³⁺ passed the UL-94 V-0 rating, achieved a limiting oxygen index (LOI) value of 31.0% and reduced the smoke production rate (SPR) and total smoke production (TSP), indicating that the introduction of D-Mt-Fe³⁺ could endow EP with satisfactory flame retardancy through the radical scavenging function of dopamine in the gas phase and the catalytic charring effect of iron ions, respectively. Encouragingly, the mechanical property was also enhanced with the flexural strength increased by 25.5%. This work provided an attractive strategy for improving both the mechanical properties and fire resistance of EP, which greatly broadened their applications in the chemical industry and electronics field, etc. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

12 pages, 1835 KiB

Open AccessArticle

Preeminent Flame-Retardant and Smoke Suppression Properties of PCaAl-LDHs Nanostructures on Bamboo Scrimber

by Fei Yang, Ailian Hu, Chungui Du, Jiawei Zhu, Yuting Wang, Yuran Shao, Qichao Bao and Yin Ran

Molecules 2023, 28(11), 4542; https://doi.org/10.3390/molecules28114542 - 3 Jun 2023

Cited by 2 | Viewed by 1609

Abstract

Bamboo scrimber is widely used in interior decoration, architecture, and many other fields. However, it has caused huge security risks due to its inherent flammability and easy-to-produce toxic volatiles after combustion. In this work, the bamboo scrimber with superior flame retardant and smoke [...] Read more.

Bamboo scrimber is widely used in interior decoration, architecture, and many other fields. However, it has caused huge security risks due to its inherent flammability and easy-to-produce toxic volatiles after combustion. In this work, the bamboo scrimber with superior flame retardant and smoke suppression properties was produced via the coupling of phosphocalcium-aluminum hydrotalcite (PCaAl-LDHs) with bamboo bundles. The results demonstrated that the flame-retardant bamboo scrimber (FRBS) heat release rate (HRR) and total heat release (THR) were, respectively, reduced by 34.46% and 15.86% compared with that of untreated bamboo scrimber. At the same time, the unique multi-layer structure of PCaAl-LDHs effectively slowed down the release rate of flue gas by extending its escape path. Cone calorimetry showed that the total smoke emissions (TSR) and specific extinction area (SEA) of FRBS were, respectively, reduced by 65.97% and 85.96% when the concentration of the flame retardant was 2%, which greatly developed the fire safety of the bamboo scrimber. This method not only improves the fire safety of bamboo scrimber but can also be expected to broaden its use scenarios. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

15 pages, 25272 KiB

Open AccessArticle

Preparation of Naphthalene-Based Flame Retardant for High Fire Safety and Smoke Suppression of Epoxy Resin

by Ziqin Huang, Fangli Li, Mingyan Huang, Wenqiao Meng, Wenhui Rao, Yuan Lei and Chuanbai Yu

Molecules 2023, 28(11), 4287; https://doi.org/10.3390/molecules28114287 - 24 May 2023

Viewed by 1772

Abstract

One of the current challenges in the development of flame retardants is the preparation of an environmentally friendly multi-element synergistic flame retardant to improve the flame retardancy, mechanical performance, and thermal performance of composites. This study synthesized an organic flame retardant (APH) using [...] Read more.

One of the current challenges in the development of flame retardants is the preparation of an environmentally friendly multi-element synergistic flame retardant to improve the flame retardancy, mechanical performance, and thermal performance of composites. This study synthesized an organic flame retardant (APH) using (3-aminopropyl) triethoxysilane (KH-550), 1,4-phthalaadehyde, 1,5-diaminonaphthalene, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) as raw materials, through the Kabachnik-Fields reaction. Adding APH to epoxy resin (EP) composites could greatly improve their flame retardancy. For instance, UL-94 with 4 wt% APH/EP reached the V-0 rating and had an LOI as high as 31.2%. Additionally, the peak heat release rate (PHRR), average heat release rate (AvHRR), total heat release (THR), and total smoke produced (TSP) of 4% APH/EP were 34.1%, 31.8%, 15.2%, and 38.4% lower than EP, respectively. The addition of APH improved the mechanical performance and thermal performance of the composites. After adding 1% APH, the impact strength increased by 15.0%, which was attributed to the good compatibility between APH and EP. The TG and DSC analyses revealed that the APH/EP composites that incorporated rigid naphthalene ring groups had higher glass transition temperatures (Tg) and a higher amount of char residue (C₇₀₀). The pyrolysis products of APH/EP were systematically investigated, and the results revealed that flame retardancy of APH was realized by the condensed-phase mechanism. APH has good compatibility with EP, excellent thermal performance, enhanced mechanical performance and rational flame retardancy, and the combustion products of the as-prepared composites complied with the green and environmental protection standards which are also broadly applied in industry. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

15 pages, 10187 KiB

Open AccessArticle

Preparation of PO₄³⁻-Intercalated Calcium–Aluminum Hydrotalcites via Coprecipitation Method and Its Flame-Retardant Effect on Bamboo Scrimber

by Ying Ran, Ailian Hu, Fei Yang, Chungui Du, Jiawei Zhu, Yuran Shao, Yuting Wang and Qichao Bao

Molecules 2023, 28(10), 4093; https://doi.org/10.3390/molecules28104093 - 15 May 2023

Cited by 5 | Viewed by 1582

Abstract

To improve the flame retardancy of bamboo scrimber, flame-retardant CaAl-PO₄-LDHs were synthesized via the coprecipitation method using PO₄³⁻ as the anion of an intercalated calcium–aluminum hydrotalcite in this work. The fine CaAl-PO₄-LDHs were characterized via X-ray diffraction [...] Read more.

To improve the flame retardancy of bamboo scrimber, flame-retardant CaAl-PO₄-LDHs were synthesized via the coprecipitation method using PO₄³⁻ as the anion of an intercalated calcium–aluminum hydrotalcite in this work. The fine CaAl-PO₄-LDHs were characterized via X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), cold field scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and thermogravimetry (TG). Different concentrations (1% and 2%) of CaAl-PO₄-LDHs were used as flame retardants for the bamboo scrimber, and the flame retardancy of the bamboo scrimber was characterized via cone calorimetry. The results showed that CaAl-PO₄-LDHs with excellent structures were successfully synthesized via the coprecipitation method in 6 h and at 120 °C. Compared with the bamboo scrimber without the flame retardant treatment, the peak heat release rate (HRR) of the bamboo scrimber treated with 1% and 2% concentrations of flame-retardant CaAl-PO₄-LDHs decreased by 16.62% and 34.46%, the time taken to reach the exothermic peak was delayed by 103 s and 204 s and the Time to Ignition (TTI) was increased by 30% and 40%, respectively. Furthermore, the residual carbon of the bamboo scrimber did not change significantly, increasing by 0.8% and 2.08%, respectively. CO production decreased by 18.87% and 26.42%, respectively, and CO₂ production decreased by 11.11% and 14.46%, respectively. The combined results show that the CaAl-PO₄-LDHs synthesized in this work significantly improved the flame retardancy of bamboo scrimber. This work exhibited the great potential of the CaAl-PO₄-LDHs, which were successfully synthesized via the coprecipitation method and applied as a flame retardant to improve the fire safety of bamboo scrimber. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Graphical abstract

18 pages, 7826 KiB

Open AccessArticle

Study on Flame Retardancy Behavior of Epoxy Resin with Phosphaphenanthrene Triazine Compound and Organic Zinc Complexes Based on Phosphonitrile

by Bo Xu, Menglin Wu, Yanting Liu and Simiao Wei

Molecules 2023, 28(7), 3069; https://doi.org/10.3390/molecules28073069 - 30 Mar 2023

Cited by 16 | Viewed by 1899

Abstract

A novel flame retardant phosphorus-containing organozinc complex (Zn-PDH) was prepared using zinc and iron as the metal center and 4-aminopyridine, with low steric hindrance, as the organic ligand, then using phosphazene to modify the organometallic complex (Zn-4APD). The flame retardant properties and mechanism [...] Read more.

A novel flame retardant phosphorus-containing organozinc complex (Zn-PDH) was prepared using zinc and iron as the metal center and 4-aminopyridine, with low steric hindrance, as the organic ligand, then using phosphazene to modify the organometallic complex (Zn-4APD). The flame retardant properties and mechanism of Zn-PDH/Tris-(3-DOPO-1-propyl)-triazinetrione (TAD) in epoxy resin (EP) were investigated. Flame inhibition behavior was studied by the vertical combustion test (UL94), while limiting oxygen index (LOI) measurement and flame retardant properties were studied by the cone calorimeter test (CONE). The flame retardant modes of action were explored by using the thermogravimetry–Fourier transform infrared (TG-FTIR) test, X-ray photoelectron spectrometer (XPS), and Raman spectroscopy (LRS). When TAD and Zn-PDH were added to the epoxy resin in the ratio of 3:1, the system achieved a balance between the gas-phase and condense-phase actions of the flame retardant effects, and the 3%TAD/1%Zn-PDH/EP composite system achieved not only good flame inhibition but also obtained good smoke and heat suppression performance, showing a comprehensive flame retardant performance. The gas phase and Zn-PDH mostly promoted charring with a barrier and protective effect in the condensed phase. As for the mechanism, TAD released the phosphorus-containing radicals and phenoxy radicals during decomposition and mainly exerted a gas-phase quenching effect. While in the condense phase, Zn-PDH promoted the decomposition of the polymer matrix to produce more aromatic structures and rapidly formed a complete and dense carbon layer rich in P-O-C crosslinked structures at high temperatures. Meanwhile, more N entered the gas phase in the form of inert gas, which diluted the concentration of the combustible fuel and helped to inhibit the combustion reaction. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

16 pages, 2385 KiB

Open AccessArticle

Pyrolysis Kinetics of Lignin-Based Flame Retardants Containing MOFs Structure for Epoxy Resins

by Tianyu Yao, Ruohan Yang, Cong Sun, Yuzhu Lin, Ruoqi Liu, Hongyu Yang, Jiajia Chen and Xiaoli Gu

Molecules 2023, 28(6), 2699; https://doi.org/10.3390/molecules28062699 - 16 Mar 2023

Cited by 7 | Viewed by 2044

Abstract

This study describes the preparation of a lignin-based expandable flame retardant (Lignin-N-DOPO) using grafting melamine and covering 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) using the Mannich reaction. Then, through in situ growth, a metal-organic framework (MOF) HKUST-1 (e.g., Cu₃(BTC)₂, BTC = benzene-1,3,5-tricarboxylate)/lignin-based expandable [...] Read more.

This study describes the preparation of a lignin-based expandable flame retardant (Lignin-N-DOPO) using grafting melamine and covering 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) using the Mannich reaction. Then, through in situ growth, a metal-organic framework (MOF) HKUST-1 (e.g., Cu₃(BTC)₂, BTC = benzene-1,3,5-tricarboxylate)/lignin-based expandable flame retardant (F-lignin@HKUST-1) was created. Before that, lignin epoxy resin containing phosphorus (P) and nitrogen (N) components had been created by combining epoxy resin (EP) with F-lignin@HKUST-1. Thermogravimetric analysis was used to examine the thermal characteristics of epoxy resin (EP) composite. The findings indicate that the thermal stability of EP is significantly affected by the presence of F-lignin@HKUST-1. Last but not least, the activation energy (E) of EP/15% F-lignin@HKUST-1 was examined using four different techniques, including the Kissinger-SY iteration method, the Ozawa-SY iteration method, the Lee-Beck approximation-iteration method, and the Gorbatchev approximation-iteration method. It was discovered that the activation energy was significantly higher than that of lignin. Higher activation energy suggests that F-lignin@HKUST-1 pyrolysis requires more energy from the environment, which will be significant about the application of lignin-based flame retardants. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

27 pages, 5817 KiB

Open AccessEditor’s ChoiceArticle

The Effect of Combined Atmospheric Plasma/UV Treatments on Improving the Durability of Flame Retardants Applied to Cotton

by Maram Ayesh, Arthur Richard Horrocks and Baljinder K. Kandola

Molecules 2022, 27(24), 8737; https://doi.org/10.3390/molecules27248737 - 9 Dec 2022

Cited by 9 | Viewed by 2014

Abstract

Application of a combined atmospheric plasma/UV laser to cotton fabrics impregnated with selected non-durable flame retardants (FRs) has shown evidence of covalent grafting of the latter species on to cotton fibre surfaces. As a result, an increase in their durability to water-soaking for [...] Read more.

Application of a combined atmospheric plasma/UV laser to cotton fabrics impregnated with selected non-durable flame retardants (FRs) has shown evidence of covalent grafting of the latter species on to cotton fibre surfaces. As a result, an increase in their durability to water-soaking for 30 min at 40 °C has been recorded. Based on previous research plasma gases comprising Ar^80%/CO₂^20% or N₂^80%/O₂^20% were used to pre-expose cotton fabric prior to or after FR impregnation to promote the formation of radical species and increased –COOH groups on surface cellulosic chains, which would encourage formation of FR-cellulose bonds. Analysis by scanning electron microscopy (SEM/EDX), X-ray photoelectron spectroscopy (XPS) and thermal analysis (TGA) suggested that organophosphorus- and nitrogen- containing flame retarding species in the presence of the silicon-containing molecules such as 3-aminopropyltriethoxy silane (APTS) resulted in formation of FR-S-O-cellulose links, which gave rise to post-water-soaking FR retentions > 10%. Similarly, the organophosphorus FR, diethyl N, N bis (2-hydroxyethyl) aminomethylphosphonate (DBAP), after plasma/UV exposure produced similar percentage retention values possibly via (PO).O.cellulose bond formation, While none of the plasmas/UV-treated, FR-impregnated fabrics showed self-extinction behaviour, although burning rates reduced and significant char formation was evident, it has been shown that FR durability may be increased using plasma/UV treatments. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

Review

Jump to: Research

20 pages, 7366 KiB

Open AccessReview

Comprehensive Review of Recent Research Advances on Flame-Retardant Coatings for Building Materials: Chemical Ingredients, Micromorphology, and Processing Techniques

by Fang-Fang Li

Molecules 2023, 28(4), 1842; https://doi.org/10.3390/molecules28041842 - 15 Feb 2023

Cited by 24 | Viewed by 7532

Abstract

Developing fire-retardant building materials is vital in reducing fire loss. The design and preparation of novel fire-retardant coatings merely require the adhesion of flame retardants with high fire-retardant characteristics on the surface, which is significantly more economical than adding excessive amounts of flame [...] Read more.

Developing fire-retardant building materials is vital in reducing fire loss. The design and preparation of novel fire-retardant coatings merely require the adhesion of flame retardants with high fire-retardant characteristics on the surface, which is significantly more economical than adding excessive amounts of flame retardants into bulk building materials. Meanwhile, fire-retardant coating has excellent performance because it can block the self-sustaining mechanisms of heat and mass transfer over combustion interfaces. In recent years, research of fire-retardant coatings for building materials has been subject to rapid development, and a variety of novel environmentally benign fire-retardant coatings have been reported. Nonetheless, as the surface characteristics of various flammable building materials are contrastively different, selecting chemical ingredients and controlling the physical morphology of fire-retardant coatings for specific building materials is rather complicated. Thus, it is urgent to review the ideas and preparation methods for new fire-retardant coatings. This paper summarizes the latest research progress of fire-retardant building materials, focusing on the compositions and performances of fire-retardant coatings, as well as the principles of their bottom-up design and preparation methods on the surface of building materials. Full article

(This article belongs to the Special Issue Flame-Resistant Materials)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Flame-Resistant Materials

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Related Special Issue

Published Papers (11 papers)

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI