Polymers

Research

17 pages, 1506 KiB

Open AccessArticle

Mechanical Properties, Fractal Dimension, and Texture Analysis of Selected 3D-Printed Resins Used in Dentistry That Underwent the Compression Test

by Anna Paradowska-Stolarz, Mieszko Wieckiewicz, Marcin Kozakiewicz and Kamil Jurczyszyn

Polymers 2023, 15(7), 1772; https://doi.org/10.3390/polym15071772 - 2 Apr 2023

Cited by 21 | Viewed by 2720

Abstract

Three-dimensional printing is finding increasing applications in today’s world. Due to the accuracy and the possibility of rapid production, the CAD/CAM (computer-aided design/computer-aided manufacturing) technology has become the most desired approach in the preparation of elements, especially in medicine and dentistry. This study [...] Read more.

Three-dimensional printing is finding increasing applications in today’s world. Due to the accuracy and the possibility of rapid production, the CAD/CAM (computer-aided design/computer-aided manufacturing) technology has become the most desired approach in the preparation of elements, especially in medicine and dentistry. This study aimed to compare the biomechanical properties, fractal dimension (FD), and texture of three selected materials used for 3D printing in dentistry. Three biomaterials used in 3D printing were evaluated. The materials were subjected to the compression test. Then, their mechanical features, FD, and texture were analyzed. All the tested materials showed different values for the studied properties. The only statistically insignificant difference was observed for the force used in the compression test. All three materials showed differences in width and height measurements. The difference in the decrease between the compression plates was also significant. For Dental LT Clear, the mean value was 0.098 mm (SD = 0.010), while for BioMed Amber it was 0.059 mm (SD = 0.019), and for IBT it was 0.356 mm (SD = 0.015). The nominal strain also differed between the materials. IBT had the highest mean value (7.98), while BioMed Amber had the smallest (1.31). FD analysis revealed that Dental LT Clear did not show differences in the structure of the material. The other two materials showed significant changes after the compression test. Texture analysis (TA) revealed similar results: BioMed Amber resin showed significantly less pronounced texture changes compared to the other two materials. BioMed Amber also showed the most stable mechanical properties, whereas those of IBT changed the most. Fractal analysis revealed that IBT showed significant differences from the other two materials, whereas TA showed that only Dental LT Clear did not show changes in its texture after the compression test. Before the compression, however, BioMed Amber differed the most when bone index was taken into account. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Graphical abstract

13 pages, 2874 KiB

Open AccessArticle

Colorimetric Determination of Glucose in Sweat Using an Alginate-Based Biosystem

by Sandra Garcia-Rey, Eva Gil-Hernandez, Lourdes Basabe-Desmonts and Fernando Benito-Lopez

Polymers 2023, 15(5), 1218; https://doi.org/10.3390/polym15051218 - 28 Feb 2023

Cited by 9 | Viewed by 3252

Abstract

Glucose is an analyte of great importance, both in the clinical and sports fields. Since blood is the gold standard biofluid used for the analytical determination of glucose, there is high interest in finding alternative non-invasive biofluids, such as sweat, for its determination. [...] Read more.

Glucose is an analyte of great importance, both in the clinical and sports fields. Since blood is the gold standard biofluid used for the analytical determination of glucose, there is high interest in finding alternative non-invasive biofluids, such as sweat, for its determination. In this research, we present an alginate-based bead-like biosystem integrated with an enzymatic assay for the determination of glucose in sweat. The system was calibrated and verified in artificial sweat, and a linear calibration range was obtained for glucose of 10–1000 µM. The colorimetric determination was investigated, and the analysis was carried out both in the black and white and in the Red:Green:Blue color code. A limit of detection and quantification of 3.8 µM and 12.7 µM, respectively, were obtained for glucose determination. The biosystem was also applied with real sweat, using a prototype of a microfluidic device platform as a proof of concept. This research demonstrated the potential of alginate hydrogels as scaffolds for the fabrication of biosystems and their possible integration in microfluidic devices. These results are intended to bring awareness of sweat as a complementary tool for standard analytical diagnosis. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Figure 1

12 pages, 5460 KiB

Open AccessArticle

Poly (Methyl Methacrylate)-Containing Silver-Phosphate Glass Exhibits Potent Antimicrobial Activity without Deteriorating the Mechanical and Biological Properties of Dental Prostheses

by Song-Yi Yang and Myung-Jin Lee

Polymers 2023, 15(2), 297; https://doi.org/10.3390/polym15020297 - 6 Jan 2023

Cited by 5 | Viewed by 1855

Abstract

Poly (methyl methacrylate) (PMMA) is a commonly used denture material with poor antimicrobial effects. This study investigated the antimicrobial effects of PMMA-containing silver-phosphate glass. We fabricated a novel material comprising PMMA-containing silver-phosphate glass. Then, microhardness, flexural strength, and gloss unit were analyzed. Antimicrobial [...] Read more.

Poly (methyl methacrylate) (PMMA) is a commonly used denture material with poor antimicrobial effects. This study investigated the antimicrobial effects of PMMA-containing silver-phosphate glass. We fabricated a novel material comprising PMMA-containing silver-phosphate glass. Then, microhardness, flexural strength, and gloss unit were analyzed. Antimicrobial activity against Streptococcus mutans and Candida albicans was investigated. Colony-forming units were counted, and antimicrobial rates were measured. Biocompatibility tests were performed using a colorimetric MTT assay for evaluating cell metabolic activity. The microhardness, flexural strength, and gloss unit of the experimental groups (with silver-phosphate glass) were not significantly different from those of the control group (no silver-phosphate glass) (P > 0.05), which showed clinically valid values. With increasing proportions of silver-phosphate glass, the antimicrobial activity against the two microorganisms increased (P < 0.05). Furthermore, S. mutans showed more than 50% antimicrobial activity in 4%, 6%, and 8% experimental groups, C. albicans showed more than 50% antimicrobial activity in 6% and 8% groups, and a statistically significant difference in antimicrobial activity was observed compared to the control (P < 0.05). The cell viability of the experimental groups was not significantly different from that of the control group (P > 0.05). Both control and experimental groups showed approximately 100% cell viability. These results suggest that silver-phosphate glass is a promising antimicrobial material in dentistry. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Figure 1

19 pages, 2922 KiB

Open AccessArticle

Surface Modification of Electrospun Bioresorbable and Biostable Scaffolds by Pulsed DC Magnetron Sputtering of Titanium for Gingival Tissue Regeneration

by Arsalan D. Badaraev, Dmitrii V. Sidelev, Anna I. Kozelskaya, Evgeny N. Bolbasov, Tuan-Hoang Tran, Alexey V. Nashchekin, Aleksandra S. Kostina, Anna B. Malashicheva, Sven Rutkowski and Sergei I. Tverdokhlebov

Polymers 2022, 14(22), 4922; https://doi.org/10.3390/polym14224922 - 15 Nov 2022

Cited by 7 | Viewed by 2455 | Correction

Abstract

In this study, polymer scaffolds were fabricated from biodegradable poly(lactide-co-glycolide) (PLGA) and from non-biodegradable vinylidene fluoride-tetrafluoroethylene (VDF-TeFE) by electrospinning. These polymer scaffolds were subsequently surface-modified by sputtering titanium targets in an argon atmosphere. Direct current pulsed magnetron sputtering was applied to prevent a [...] Read more.

In this study, polymer scaffolds were fabricated from biodegradable poly(lactide-co-glycolide) (PLGA) and from non-biodegradable vinylidene fluoride-tetrafluoroethylene (VDF-TeFE) by electrospinning. These polymer scaffolds were subsequently surface-modified by sputtering titanium targets in an argon atmosphere. Direct current pulsed magnetron sputtering was applied to prevent a significant influence of discharge plasma on the morphology and mechanical properties of the nonwoven polymer scaffolds. The scaffolds with initially hydrophobic properties show higher hydrophilicity and absorbing properties after surface modification with titanium. The surface modification by titanium significantly increases the cell adhesion of both the biodegradable and the non-biodegradable scaffolds. Immunocytochemistry investigations of human gingival fibroblast cells on the surface-modified scaffolds indicate that a PLGA scaffold exhibits higher cell adhesion than a VDF-TeFE scaffold. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Figure 1

14 pages, 3830 KiB

Open AccessArticle

Fabrication of Low-Molecular-Weight Hyaluronic Acid–Carboxymethyl Cellulose Hybrid to Promote Bone Growth in Guided Bone Regeneration Surgery: An Animal Study

by Chun-Yu Lin, Po-Jan Kuo, Ya-Hui Lin, Chi-Yu Lin, Jerry Chin-Yi Lin, Hsien-Chung Chiu, Tsung-Fu Hung, Hung-Yun Lin and Haw-Ming Huang

Polymers 2022, 14(15), 3211; https://doi.org/10.3390/polym14153211 - 6 Aug 2022

Cited by 4 | Viewed by 2011

Abstract

Guided bone regeneration surgery is an important dental operation used to regenerate enough bone to successfully heal dental implants. When this technique is performed on maxilla sinuses, hyaluronic acid (HLA) can be used as an auxiliary material to improve the graft material handling [...] Read more.

Guided bone regeneration surgery is an important dental operation used to regenerate enough bone to successfully heal dental implants. When this technique is performed on maxilla sinuses, hyaluronic acid (HLA) can be used as an auxiliary material to improve the graft material handling properties. Recent studies have indicated that low-molecular hyaluronic acid (L-HLA) provides a better regeneration ability than high-molecular-weight (H-HLA) analogues. The aim of this study was to fabricate an L-HLA-carboxymethyl cellulose (CMC) hybrid to promote bone regeneration while maintaining viscosity. The proliferation effect of fabricated L-HLA was tested using dental pulp stem cells (DPSCs). The mitogen-activated protein kinase (MAPK) pathway was examined using cells cultured with L-HLA combined with extracellular-signal-regulated kinase (ERK), c-Jun N-terminal kinase (JNK), and p38 inhibitors. The bone growth promotion of fabricated L-HLA/CMC hybrids was tested using an animal model. Micro-computer tomography (Micro-CT) and histological images were evaluated quantitatively to compare the differences in the osteogenesis between the H-HLA and L-HLA. Our results show that the fabricated L-HLA can bind to CD44 on the DPSC cell membranes and affect MAPK pathways, resulting in a prompt proliferation rate increase. Micro CT images show that new bone formation in rabbit calvaria defects treated with L-HLA/CMC was almost two times higher than in defects filled with H-HLA/CMC (p < 0.05) at 4 weeks, a trend that remained at 8 weeks and was confirmed by HE-stained images. According to these findings, it is reasonable to conclude that L-HLA provides better bone healing than H-HLA, and that the L-HLA/CMC fabricated in this study is a potential candidate for improving bone healing efficiency when a guided bone regeneration surgery was performed. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Figure 1

19 pages, 4137 KiB

Open AccessArticle

The Effect of Ca²⁺ and Mg²⁺ Ions Loaded at Degradable PLA Membranes on the Proliferation and Osteoinduction of MSCs

by Sugoi Retegi-Carrión, Ana Ferrandez-Montero, Alvaro Eguiluz, Begoña Ferrari and Ander Abarrategi

Polymers 2022, 14(12), 2422; https://doi.org/10.3390/polym14122422 - 15 Jun 2022

Cited by 10 | Viewed by 2563

Abstract

Biodegradable membranes, including Polylactic acid (PLA)-based membranes, are commonly used in bone-tissue-related clinical procedures as biointerface to promote bone tissue regeneration. Calcium (Ca²⁺) and Magnesium (Mg²⁺) ions have been related to the promotion of osteogenesis, where the PLA membranes [...] Read more.

Biodegradable membranes, including Polylactic acid (PLA)-based membranes, are commonly used in bone-tissue-related clinical procedures as biointerface to promote bone tissue regeneration. Calcium (Ca²⁺) and Magnesium (Mg²⁺) ions have been related to the promotion of osteogenesis, where the PLA membranes could be used as carrier and delivery substrate for them to provide osteogenic properties to this material. For this aim, a new ion delivery system based on biodegradable PLA membranes loaded with Mg and hydroxyapatite (HA) particles has been processed by the combination of tape casting and colloidal route. Materials characterization shows that the incorporation of Mg and HA particles changes the surface and hydrophobicity of the PLA membrane, and the in vitro degradation test shows Mg²⁺ and Ca²⁺ ion release and occasionally the precipitation of different ion species onto the membrane surface. Mouse and human Mesenchymal Stem Cells (MSC) were used to define the biocompatibility and bioactivity of these PLA membrane composites, and data indicated Mg²⁺ promotes cell proliferation and potentiates osteoinductive signals, while Ca²⁺ induces the expression of ALP osteogenic marker in human MSCs. Biodegradable PLA membranes loaded with Mg and HA particles is a promising new ion delivery system of Mg²⁺ and Ca²⁺ ions that provides osteogenic signals and works as functional biointerface interfaces with bone tissues. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Figure 1

21 pages, 24965 KiB

Open AccessArticle

Stereocomplexation Reinforced High Strength Poly(L-lactide)/Nanohydroxyapatite Composites for Potential Bone Repair Applications

by Naishun Guo, Mengen Zhao, Sijing Li, Jiahui Hao, Zhaoying Wu and Chao Zhang

Polymers 2022, 14(3), 645; https://doi.org/10.3390/polym14030645 - 8 Feb 2022

Cited by 8 | Viewed by 2223

Abstract

Composite materials composed of polylactide (PLA) and nano-hydroxyapatite (n-HA) have been recognized as excellent candidate material in bone repai The difference in hydrophilicity/hydrophobicity and poor interfacial compatibility between n-HA filler and PLA matrix leads to non-uniform dispersion of n-HA in PLA matrix and [...] Read more.

Composite materials composed of polylactide (PLA) and nano-hydroxyapatite (n-HA) have been recognized as excellent candidate material in bone repai The difference in hydrophilicity/hydrophobicity and poor interfacial compatibility between n-HA filler and PLA matrix leads to non-uniform dispersion of n-HA in PLA matrix and consequent poor reinforcement effect. In this study, an HA/PLA nanocomposite was designed based on the surface modification of n-HA with poly(D-lactide) (PDLA), which not only can improve the dispersion of n-HA in the poly(L-lactide) (PLLA) matrix but also could form a stereocomplex crystal with the matrix PLLA at the interface and ultimately lead to greatly enhanced mechanical performance The n-HA/PLA composites were characterized by means of scanning electron microscopy, Fourier transform infrared spectroscopy, X-Ray diffraction, thermal gravity analysis, differential scanning calorimetry, and a mechanical test; in vitro cytotoxicity of the composite material as well as its efficacy in inducing osteogenic differentiation of rat bone marrow stromal cells (rMSCs) were also evaluated. Compared with those of neat PLLA, the tensile strength, Young’s modulus, interfacial shear strength, elongation at break and crystallinity of the composites increased by 34%, 53%, 26%, 70%, and 17%, respectively. The adhesion and proliferation as well as the osteogenic differentiation of rMSCs on HA/PLA composites were clearly evidenced. Therefore, the HA/PLA composites have great potential for bone repai. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Graphical abstract

17 pages, 3994 KiB

Open AccessArticle

Electrospun Nanofibrous Membranes Based on Citric Acid-Functionalized Chitosan Containing rGO-TEPA with Potential Application in Wound Dressings

by Elena Cojocaru, Jana Ghitman, Gratiela Gradisteanu Pircalabioru, Cristina Stavarache, Andrada Serafim, Eugeniu Vasile and Horia Iovu

Polymers 2022, 14(2), 294; https://doi.org/10.3390/polym14020294 - 12 Jan 2022

Cited by 13 | Viewed by 2597

Abstract

The present research work is focused on the design and investigation of electrospun composite membranes based on citric acid-functionalized chitosan (CsA) containing reduced graphene oxide-tetraethylene pentamine (CsA/rGO-TEPA) as materials with opportune bio-properties for applications in wound dressings. The covalent functionalization of chitosan (CS) [...] Read more.

The present research work is focused on the design and investigation of electrospun composite membranes based on citric acid-functionalized chitosan (CsA) containing reduced graphene oxide-tetraethylene pentamine (CsA/rGO-TEPA) as materials with opportune bio-properties for applications in wound dressings. The covalent functionalization of chitosan (CS) with citric acid (CA) was achieved through the EDC/NHS coupling system and was checked by ¹H-NMR spectroscopy and FTIR spectrometry. The mixtures to be electrospun were formulated by adding three concentrations of rGO-TEPA into the 1/1 (w/w) CsA/poly (ethylene oxide) (PEO) solution. The effect of rGO-TEPA concentration on the morphology, wettability, thermal stability, cytocompatibility, cytotoxicity, and anti-biofilm activity of the nanofibrous membranes was extensively investigated. FTIR and Raman results confirmed the covalent and non-covalent interactions that appeared between the system’s compounds, and the exfoliation of rGO-TEPA sheets within the CsA in the presence of PEO (CsA/P) polymer matrix, respectively. SEM analysis emphasized the nanofibrous architecture of membranes and the presence of rGO-TEPA sheets entrapped into the CsA nanofiber structure. The MTT cellular viability assay showed a good cytocompatibility with the highest level of cell development and proliferation registered for the CsA/P composite nanofibrous membrane with 0.250 wt.% rGO-TEPA. The designed nanofibrous membranes could have potential applications in wound dressings, given that they showed a good anti-biofilm activity against Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus bacterial strains. Full article

(This article belongs to the Special Issue Medical Application of Polymer-Based Composites III)

► Show Figures

Graphical abstract

Journal Menu

Journal Browser

Medical Application of Polymer-Based Composites III

Share This Special Issue

Special Issue Editor

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Related Special Issue

Published Papers (8 papers)

Research

Further Information

Guidelines

MDPI Initiatives

Follow MDPI