Next Article in Journal
Evaluation of New Dihydrophthalazine-Appended 2,4-Diaminopyrimidines against Bacillus anthracis: Improved Syntheses Using a New Pincer Complex
Next Article in Special Issue
One-Pot Synthesis of Organic-Sulfur-Zinc Hybrid Materials via Polycondensation of a Zinc Salt and Thiols Generated in Situ from Cyclic Dithiocarbonates
Previous Article in Journal
Synthesis and Antiplatelet Activity of Antithrombotic Thiourea Compounds: Biological and Structure-Activity Relationship Studies
Previous Article in Special Issue
Green Polymer Chemistry: Investigating the Mechanism of Radical Ring-Opening Redox Polymerization (R3P) of 3,6-Dioxa-1,8-octanedithiol (DODT)
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 20
Issue 4
10.3390/molecules20047201
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources

by
Jacques Lalevée
*,
Haifaa Mokbel
and
Jean-Pierre Fouassier
†
Institut de Science des Matériaux de Mulhouse IS2M, UMR CNRS 7361, UHA, 15, rue Jean Starcky, 68057 Mulhouse Cedex, France
*
Author to whom correspondence should be addressed.
†
Formerly address: UHA-ENSCMu, 3, rue Alfred Werner, 68093 Mulhouse, France.
Molecules 2015, 20(4), 7201-7221; https://doi.org/10.3390/molecules20047201
Submission received: 25 February 2015 / Revised: 27 March 2015 / Accepted: 30 March 2015 / Published: 20 April 2015
(This article belongs to the Special Issue Ring-Opening Polymerization)
Browse Figures
Versions Notes

Abstract

:
Photoinitiators (PI) or photoinitiating systems (PIS) usable in light induced cationic polymerization (CP) and free radical promoted cationic polymerization (FRPCP) reactions (more specifically for cationic ring opening polymerization (ROP)) together with the involved mechanisms are briefly reviewed. The recent developments of novel two- and three-component PISs for CP and FRPCP upon exposure to low intensity blue to red lights is emphasized in details. Examples of such reactions under various experimental conditions are provided.

1. Introduction

Ring opening polymerization (ROP) reactions are very well known in macromolecular science (see e.g., in [1,2]). Thermally initiated ionic and coordination ROP as well as controlled ROP have been recently reviewed and detailed in [3]. Cationic polymerization (CP) reactions (of e.g., divinylethers) and the particular cationic ROP of cyclic monomers (e.g., epoxides, oxiranes such as cyclohexene oxide) can also be initiated by light (see, e.g., in books [4,5,6,7,8,9,10,11,12,13,14,15,16] and in review papers [17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32]).
The applications of light induced CP are extensively developed in the Radiation Curing (RC) area (e.g., in coatings). Applications are also noted, e.g., in printing inks, microelectronics or manufacture of optical elements. On industrial grounds, the benefits of the RC technology are, e.g., use of non-polluting and solvent-free formulations (almost no Volatile Organic Compounds (VOC)), low energy requirements, low temperature treatments (suitable for heat sensitive substrates), rapid through-cure, small space requirements, and low costs. Cationic photopolymerizations are, however, less encountered than free radical photopolymerization reactions. Indeed, although they exhibit some decisive advantages (e.g., no oxygen inhibition, important dark post-effect, less shrinkage problems in the cured material), they present several drawbacks (e.g., moisture and water sensitivity, very limited choice of monomer formulations, slower rates of polymerization for the epoxides, higher costs for monomers). The range of monomers and oligomers available for ROP has been, however, largely expanded. Epoxides are widely used and give coatings with high thermal capability, excellent adhesion, good chemical resistance and environmentally friendly characteristics. Cyclic ethers such as oxetanes are alternatives to epoxides for getting fast curing speeds in industrial lines. Recent developments include, e.g., cationic monomers possessing readily abstractable hydrogen atoms, mono and bifunctional epoxides, hybrid monomers such as epoxide-vinyl ethers (or -propenyl ethers, -acetals), spiro orthocarbonates, epoxy modified silicone monomers, renewable monomers (e.g., epoxidized sunflower, soybean oil, linseed oil, vernonia oil, castor oil; limonene dioxide LDO, epoxidized natural rubbers).
CP reactions require the presence of a photoinitiator PI or a photoinitiating system PIS (consisting in a photosensitizer PS/PI couple or a PI/additive(s) system) that can absorb the light and generate cations or radical cations being able to initiate CP (Scheme 1). The absorption properties, the excited state processes, the easiness of production of the initiating species as well as their reactivity towards the addition reaction to the cationic monomer ring govern the overall efficiency of the polymerization reaction.
Molecules 20 07201 g010 550
Scheme 1. General scheme for cationic photoinitiator.
Scheme 1. General scheme for cationic photoinitiator.
Molecules 20 07201 g010
Conventional polychromatic UV and visible light sources (Hg lamps, Xe-Hg lamps, Xe lamps, doped Hg lamps) are usually employed. The recent design of high intensity quasi-monochromatic LED or monochromatic laser diode arrays as well as the use of sunlight (in sunlight-assisted processes: no irradiation device, possibility of curing large dimension pieces or surfaces) or low intensity household devices delivering visible lights (no UV rays, no Hg lamps, no ozone release) allow new opportunities of applications.
Both the relatively small number of originally available cationic PIs and the difficulty to find efficient photosensitizers (PSs) have forced CP to mostly operate under UV lights for a long time, even though some interesting novel PIs or PS/PI couples already ensured long wavelength sensitivity (see below). Today, the development of novel free radical promoted cationic polymerization (FRPCP) reactions (Scheme 2) using well adapted photoinitiating systems (PISs) (in order to decrease the oxygen inhibition due to the radicals) has noticeably enhanced the possibilities and allowed a photosensitivity from the violet to the red (see below).
Molecules 20 07201 g011 550
Scheme 2. Principle for the free radical promoted cationic polymerization.
Scheme 2. Principle for the free radical promoted cationic polymerization.
Molecules 20 07201 g011
In the present paper, we will briefly present the PIs and PISs that have been developed for CP and FRPCP reactions, more specifically for the cationic ROP of epoxides. The involved mechanisms will also be reviewed. As many review papers and books on the currently existing PIs and PISs already appeared (see above), we will focus the attention of the reader on a recently newly proposed strategy for the design of original two- and three-component PISs for CP and FRPCP upon exposure to low intensity blue to red lights. Several examples will be provided.

2. Backgrounds: Photoinitiation of Cationic ROP

Iodonium (Iod) and sulfonium (Sulf) salts, originally proposed in the 1970s [33,34] (see also reviews in [5,29]) and extensively studied [35,36,37,38,39,40,41,42] are the most widely used PIs for the CP of a large variety of monomers such as epoxides. In the near UV, the simplest Iod (diphenyl iodonium salt Ph2I+) exhibits a less intense absorption (located at ~230 nm) than the corresponding triphenyl sulfonium salt Ph3S+ (absorption at ~260 nm).
The photodecomposition process is well established and involves a primary heterolytic or/and homolytic cleavage of the C-I or C-S bond. A phenyliodide/phenyl cation or a phenyliodinium cation/phenyl radical pair is thus produced in irradiated Iod. In Sulf, a heterolytic cleavage also occurs. Further out-of-cage processes (due to the presence of abstractable hydrogen atom in the medium) and in-cage processes arise; in any case, a strong Brönsted acid is generated and can initiate ROP (Scheme 3).
Molecules 20 07201 g012 550
Scheme 3. Formation of acid from iodonium salts.
Scheme 3. Formation of acid from iodonium salts.
Molecules 20 07201 g012
The photosensitized decomposition of Iod or Sulf in the presence of a suitable compound (denoted as a photosensitizer (PS) in photochemistry; in the RC area, PS can also be considered as a PI as it leads to initiating species) is possible. It occurs through energy (ET) or electron (eT) transfer processes governed by energetic considerations (in the usual triplet-triplet ET, the energy level of the excited donor must be higher than that of the acceptor) or thermodynamical requirements (the free energy change (ΔG) for the reaction must be negative), respectively (e.g., in Scheme 4). The possibilities for an ET route are rather limited (a low lying excited single state for getting a visible light absorption is not compatible with a high lying triplet state required for energy transfer).
Molecules 20 07201 g013 550
Scheme 4. Energy (ET) or electron (eT) transfer to sensitize the decomposition of iodonium salts.
Scheme 4. Energy (ET) or electron (eT) transfer to sensitize the decomposition of iodonium salts.
Molecules 20 07201 g013
On the opposite, the eT route is more successful in PS/Iod couples (this redox reaction is less favorable in PS/Sulf couples). Using, e.g., hydrocarbons, phenothiazines, ketones, dyes, metal complexes, various aromatic moiety linked to an epoxide unit, thiophene derivatives, poly(phenylene vinylene)s, as PS, a radical cation is produced (PS•+) and the formed diphenyl iodide radical cleaves into iodobenzene and a phenyl radical. The main drawbacks are the ability of PS•+ to initiate ROP (subsequent reactions of PS•+ with water, the phenyl radical or its dimerization have been shown in some cases) as long wavelength excitations and efficient PS/Iod electron transfer processes can be relatively easily obtained.
The eT can also occur (Scheme 5) through an electron transfer between a radical R• (generated from a cleavable PS) and Iod (the R•/Sulf redox reaction is very often not favorable due to the less favorable reduction potential of Sulf compared to Iod [5]). This way leads to a FRPCP reaction. Selecting PS allows changing the absorption but the initiating cation R+ is also changed (examples of such PS are ketones, ketone/amine, phosphine oxides, polysilanes, benzoyl germanes, dimanganese decacarbonyl/alkyl halide). The main drawbacks were the few available efficient systems (mostly restricted to the UV or near UV/vis range), the oxygen sensitivity of the system and the reactivity of R+. Another eT route concerns the addition/fragmentation process where R• adds to a suitable allyl onium salt that further cleaves into a radical cation and an ethylenic product.
Molecules 20 07201 g014 550
Scheme 5. Oxidation of radicals to generate initiating species for ring opening polymerization (ROP).
Scheme 5. Oxidation of radicals to generate initiating species for ring opening polymerization (ROP).
Molecules 20 07201 g014
Recent successful results using PS/Iod systems and allowing visible light irradiations for ROP reactions can be found in, e.g., [43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62]. The design of one-component PI (e.g., the ferrocenium salts) is certainly an interesting answer to avoid such bi-component systems where compatibility and diffusion of the reactants in the polymerizable matrix might be a problem. In all cases current applications, however, except the use of Iod or Sulf alone under UV lights, a PS/Iod couple is conveniently employed as soon as UV radiations must be avoided. As stated above, in all these PS/Iod systems, the PS•+ initiating ability is decisive and the PS absorption has to match the emission spectrum of the light source: therefore, each couple will exhibit a characteristic behavior. Obviously, such systems cannot be versatile. A great progress has certainly been made using a novel strategy (see below).
Adequate structural modifications on Iod and Sulf led to compounds exhibiting red-shifted and enhanced absorption (e.g., bis triaryl sulfonium salts), suppressed benzene release (e.g., aryl iodonium salts) or allowed a better solubility (salts containing long alkyl chains) and compatibility (polymeric iodonium salts). Original and different cationic skeletons include dialkyl and cycloalkyl sulfonium salts, phenylethynyl sulfonium salts, acylsulfonium salts, dialkyl aryl sulfonium salts, thianthrenium salts or onium salts centered on a N (e.g., quinolinium, ammonium, anilinium salts, P (pyridinium, phosphonium salts), O (pyrilium salts) or a S atom (thiopyrilium, thiazolinium salts). Interesting results can be found in e.g., [63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86].
Other chemical structures that can initiate CP are e.g., the diazonium salts (e.g., in Ar2N+ BF4−, a BF3 Lewis acid is generated) [87,88]. Various organometallic derivatives (transition, non-transition and inorganic transition complexes) have also been proposed in the past [89] or recently revisited (see e.g., [70]); among them, the ferrocenium salt series (e.g., the (η6-cumene) (η5-cyclopentadienyl) iron (II) representative) ensure a blue light absorption: it works according to a ligand transfer reaction that expels the arene moiety, which is replaced by three epoxides, the initiating carbocation being obtained through a thermal cleavage of the epoxy C-O single bond (then, the polymerization proceeds outward through the coordination sphere of the iron atom). Non-ionic photoacid generators are also used (see e.g., in [90]).
The degree of separation in the propagating ion pair (oxonium cation/anion) is dependent on both the size and the electron density of the anion. Indeed, for this anion, with a larger size and/or a lower nucleophilicity, the polymerization rates become higher. Usual non-nucleophilic anions in onium salts allow excellent rates of polymerization, e.g., SbF6− > AsF6− > PF6− > BF4− >> I− or Cl−. The bulky tetrakis (pentafluorophenyl) borate B(C6F5)4− anion, which exhibits a low nucleophilicity together with a large size, leads to a high propagation rate constant and avoids Sb containing systems has ensured a substantial progress [91].
The UV intensity, temperature and dark-curing effects in CP/ROP have been recently considered again (see [92] and references therein).
The photoinitiated CP of renewable monomers (such as limonene 1,2-oxide and α-pinene oxide) was recently discussed ([93] and references therein).

3. Development of a New Strategy and Design of Novel Cationic Photoinitiating Systems

3.1. The New Strategy

To avoid the drawbacks inherent to the photosensitization of cationic PIs in CP or the particular character of the FRPCP reactions observed so far (one kind of initiating radical cation PS•+ (Scheme 4) or cation R+ (Scheme 5) for one kind of PS in the PIS as recalled above), we have defined a novel strategy using the FRPCP procedure and being able to lead to the formation of the same initiating cation whatever the starting light absorbing compound (referred here as a dye D). This has been realized using a dye, a silane R3SiH such as tris-(trimethylsilyl)silane ((TMS)3SiH), or N-vinylcarbazole NVK) and an iodonium salt (such as Ph2I+, referred to as Iod) [94,95,96,97]. Upon light exposure, the excited dye (D*) (Scheme 6) reacts with Iod thereby generated a phenyl radical that interacts with R3SiH; the formed silyl radical R3Si• is oxidized by Iod into a silylium cation R3Si+. Therefore, at any wavelength (this only depends on D), the same R3Si+ cation is produced. The criticism concerning a possible oxygen inhibition is ruled out as silyl radicals consume oxygen, scavenge all peroxyl radicals and regenerate new silyls (oxygen becomes a mediator in the initiating radical production). N-vinylcarbazole (NVK) appeared as a cheap and efficient alternative to the silane: the same mechanism is observed except that Ph• adds to the NVK double bond (and formed Ph-NVK•) instead of abstracting a hydrogen atom on the silane. These three-component PISs (D/Iod/(TMS)3SiH or D/Iod/NVK) are really versatile and allows many possibilities as it will be seen below.
Molecules 20 07201 g015 550
Scheme 6. Photoinitiating systems using silyl radicals.
Scheme 6. Photoinitiating systems using silyl radicals.
Molecules 20 07201 g015
The decomposition of iodonium salts in the presence of a dye is largely encountered in the literature. The electron transfer reaction is usually fast as resulting from highly favorable free energy changes, but, unfortunately, back electron transfer reactions can more or less reduce the yield of electron transfer and decrease the overall efficiency of the system. The phenyl/silane hydrogen abstraction reaction is also a fast process. The silyl/iodonium salt interaction (contrary to that of silyl/sulfonium salt) is largely favorable. The silylium efficiently adds to the epoxide. Thus, the starting point of the research consists in looking for dyes D exhibiting suitable absorptions (from the UV to the red region) together with molar extinction coefficients ε as high as possible. In fact, the initiation step of a photoinduced CP is dependent on the amount of absorbed energy Iabs and the initiation quantum yield Φi:Iabs is linked to the incident light intensity Io of the light source and the ε of the dye (and obviously, path length l and reactant concentration c) according to Iabs = I0 (1 − 10−εcl) and the Φi term exhibits a rather complex dependence on the rate constants of the different excited state processes involved.
In addition to the use of already known dye structures [5], the development of highly absorbing dyes in the 380–700 nm wavelength range has required a search for novel skeletons, a specific design of novel architectures with a strong coupling of the molecular orbitals or the quest for compounds existing in other application areas.
Such dyes include (see a review in [27]): (i) modified known compounds such as ruthenium, iridium, iron and copper salts, titanocenes, benzophenones, thioxanthones, Michler’s ketones, thiopyrilium salts, metal carbonyls, decatungstates, polyoxometalates; (ii) commercial compounds such as violanthrone; (iii) available derivatives of structures in other areas such as thiophenes, dihydropyrenes or squarianes; and (iv) synthesized novel skeletons such as bi- and tri-functional compounds with an extending delocalization.
These dye/silane (or NVK)/iodonium salt combinations can easily work in very different experimental conditions. They all allow FRPCP under air. In the absence of silane or NVK, they initiate CP. Various aspects of such reactions as well as the characteristics of the PISs are the following.

3.2. Examples of What Can Be Achieved

Use of Polychromatic lights. Polychromatic as well as monochromatic lights can be used. They range from the UV to the red. Possible sources are Hg, Xe-Hg or Xe lamps (band emission spectra or continuous spectra), laser diodes and LEDs but also low intensity household lamps (e.g., halogen lamps, fluorescent bulbs). With the best PISs, the conversions of (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate (EPOX) used as a benchmark cyclic monomer for ROP are above 60% and can even reached 80%–90% under air upon exposure to various visible light sources having light intensities of 50–100 mW/cm−2. Competitive-reference PISs are ketone/Iod in the UV, phosphine oxides/Iod in the violet range, camphorquinone/Iod (optionally with alcohol) in the blue region, xanthene dye/Iod in the green range or polymethine/Iod in the red region. None of these systems is better than the best dye/Iod/silane (or NVK) combinations gathered in [27] for the ROP of 25 µm EPOX films in contact with air under exposure to relatively low light intensity sources. Many details can be found in a recent review [27]. Nice recent and particular examples (Figure 1, Figure 2 and Figure 3) include the ROP reactions of EPOX under air in the presence of suitable PISs upon exposure to various LEDs or laser diodes (80–100 mW/cm2):
-
violet LED: dyes are, e.g., boranyls [98], benzophenones, thioxanthones, or benzoin ethers, phenylene, moiety coupled scaffolds [99,100,101,102]
-
blue LED: dyes are, e.g., indanediones [103], pyrromethenes [104], naphtalimides [105], Ru [106] or Ir [107], complexes (Figure 1)
-
green LED: dyes are, e.g., Ru [108] or Ir [109], complexes, diketopyrrolopyrroles [110] (Figure 2)
-
red LED: dyes are, e.g., pentacenes [111], violanthrones [112], perylenes [113], anthraquinones [114] (Figure 3)
Panchromatic PIs. The design of multicolour PI and panchromatic cationic formulations can also be achieved using a broad absorption band possessing dye (e.g., dihydropyrenes [115]) (Figure 4) or a careful mixing of several well adapted dyes, such as indanediones [103] and squaraines [116] (Figure 5).
Photoinitiator Catalysts. The elaboration of photoinitiator catalysts PIC was also described. In that case, the starting photoinitiator (dye) is recovered (and thereby not consumed) during the polymerization thanks to the use of adequate dyes as metal-based photocatalysts (MPC, e.g., [107,108,109]) or metal-free photocatalysts (organic photocatalysts OPC, e.g., pentacenes [111]) where redox reactions allow such behavior (Figure 6).
Molecules 20 07201 g001 550
Figure 1. (A) UV-visible absorption spectra of ND10 and ND4; (B) Photopolymerization profiles for EPOX under air in the presence of (i) ND4/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 457 nm (curve 1) exposure; and (ii) ND10/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 457 nm exposure (curve 2) [105].
Figure 1. (A) UV-visible absorption spectra of ND10 and ND4; (B) Photopolymerization profiles for EPOX under air in the presence of (i) ND4/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 457 nm (curve 1) exposure; and (ii) ND10/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 457 nm exposure (curve 2) [105].
Molecules 20 07201 g001
Molecules 20 07201 g002 550
Figure 2. (left part) Photopolymerization profiles of EPOX under air in the presence of DPPDT/Iod (0.5%/2%, w/w) upon the halogen lamp (a) and laser diode at 532 nm (b); DPPDT/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 532 nm (c); (right part) Steady state photolysis of DPPDT/Iod in tetrahydrofuran upon the laser diode at 532 nm exposure under air, respectively; [Iod] = 3.1 × 10–2 M. from [110].
Figure 2. (left part) Photopolymerization profiles of EPOX under air in the presence of DPPDT/Iod (0.5%/2%, w/w) upon the halogen lamp (a) and laser diode at 532 nm (b); DPPDT/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 532 nm (c); (right part) Steady state photolysis of DPPDT/Iod in tetrahydrofuran upon the laser diode at 532 nm exposure under air, respectively; [Iod] = 3.1 × 10–2 M. from [110].
Molecules 20 07201 g002
Renewable Monomers. The photopolymerization of renewable cationic monomers, that can be easily expected, has been demonstrated [117] (see also Figure 7). Tack-free coatings are formed. In any case, a decrease of the band at ~790 cm−1 (due to the epoxy ring) is monitored, whereas an increase of the IR absorption band of the polyether network is observed in the 1050–1150 cm−1 range.
Polymerization of LDO, ELO and ESO. Due to the very excellent photosensitivity of the newly developed dye/silane (or NVK)/iodonium salt combinations, the irradiation under extremely soft irradiation conditions or sunlight exposure becomes feasible which should open new opportunities [23,117]. Figure 7 shows the epoxide consumption and the formation of the polyether network under a household fluorescent bulb (~10 mW/cm−2) or sunlight (<5 mW/cm−2) exposure under air. In outdoor conditions, tack-free coatings are obtained with LDO, ELO and ESO. As before, the polymerization profiles of these monomers are also clearly improved by the presence of a silane, e.g., for ELO, a tack-free coating is obtained within only 9 min in the presence of a silane (TTMSS) vs. 50 min in the absence of the silane [23].
Molecules 20 07201 g003 550
Figure 3. (left) UV-vis absorption spectrum for OBN and (right) Cationic photopolymerization upon red lights using an anthraquinone derivative (OBN) as photoinitiator: Photopolymerization profile of EPOX under air in the presence of (1) OBN/Iod/NVK (0.5%/2%/3%, w/w/w) upon the halogen lamp exposure; and (2) OBN/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 635 nm exposure [114].
Figure 3. (left) UV-vis absorption spectrum for OBN and (right) Cationic photopolymerization upon red lights using an anthraquinone derivative (OBN) as photoinitiator: Photopolymerization profile of EPOX under air in the presence of (1) OBN/Iod/NVK (0.5%/2%/3%, w/w/w) upon the halogen lamp exposure; and (2) OBN/Iod/NVK (0.5%/2%/3%, w/w/w) upon the laser diode at 635 nm exposure [114].
Molecules 20 07201 g003
Molecules 20 07201 g004 550
Figure 4. A multicolor photoinitiator for cationic polymerization and interpenetrated polymer network synthesis: 2,7-Di- tert—butyldimethyldihydropyrene (DHP) [115]: Photopolymerization profiles of EPOX under air using the dihydropyrene DHP/Iod/NVK photoinitiating system (1%/2%/3% w/w) upon irradiation with: (a) a laser diode (473 nm); (b) a laser diode (457 nm); (c) a halogen lamp; (d) a laser diode (635 nm); (e) a laser diode (405 nm); and (f) a laser diode (532 nm).
Figure 4. A multicolor photoinitiator for cationic polymerization and interpenetrated polymer network synthesis: 2,7-Di- tert—butyldimethyldihydropyrene (DHP) [115]: Photopolymerization profiles of EPOX under air using the dihydropyrene DHP/Iod/NVK photoinitiating system (1%/2%/3% w/w) upon irradiation with: (a) a laser diode (473 nm); (b) a laser diode (457 nm); (c) a halogen lamp; (d) a laser diode (635 nm); (e) a laser diode (405 nm); and (f) a laser diode (532 nm).
Molecules 20 07201 g004
Molecules 20 07201 g005 550
Figure 5. Panchromatic photopolymerizable cationic films using indoline and squaraine dye based photoinitiating systems [116]: (A) absorption spectra for the dyes and (B) Photopolymerization profile of EPOX under air in the presence of (1) D102/Iod (0.5%/2%, w/w) upon the halogen lamp exposure; and D102/Iod/NVK (0.5%/2%/3%, w/w/w) under the (2) halogen lamp; (3) laser diode at 457 nm; (4) laser diode at 473 nm. For mixture of photoinitiators (D102/SQ02), polymerization profiles are given in [116].
Figure 5. Panchromatic photopolymerizable cationic films using indoline and squaraine dye based photoinitiating systems [116]: (A) absorption spectra for the dyes and (B) Photopolymerization profile of EPOX under air in the presence of (1) D102/Iod (0.5%/2%, w/w) upon the halogen lamp exposure; and D102/Iod/NVK (0.5%/2%/3%, w/w/w) under the (2) halogen lamp; (3) laser diode at 457 nm; (4) laser diode at 473 nm. For mixture of photoinitiators (D102/SQ02), polymerization profiles are given in [116].
Molecules 20 07201 g005
IPN synthesis. As most of the proposed dye/silane (or NVK)/iodonium salt PISs are also able to generate radicals, the synthesis of interpenetrating polymer networks (IPN) through the concomitant photopolymerization of epoxide/acrylate blends (one-step hybrid cure) was efficiently carried out using suitable dyes, e.g., naphthalene, derivatives [118] (Figure 8).
Molecules 20 07201 g006 550
Figure 6. Tunable organophotocatalysts for polymerization reactions under visible lights: (a) reaction scheme for OPC and (b) polymerization profiles of EPOX under air upon: a red LED bulb irradiation in the presence of: (1) Pent/Ph2I+ (0.5%/2% w/w); and (2) Pent/(TMS)3Si-H/Ph2I+ (0.5%/3%/2% w/w) [111].
Figure 6. Tunable organophotocatalysts for polymerization reactions under visible lights: (a) reaction scheme for OPC and (b) polymerization profiles of EPOX under air upon: a red LED bulb irradiation in the presence of: (1) Pent/Ph2I+ (0.5%/2% w/w); and (2) Pent/(TMS)3Si-H/Ph2I+ (0.5%/3%/2% w/w) [111].
Molecules 20 07201 g006
Molecules 20 07201 g007 550
Figure 7. IR spectra recorded in the course of a photopolymerization of ELO; initiating system: BPSK/Ph2I+/TTMSS (1%/2%/3% w/w) upon a fluorescent bulb irradiation (from t = 0 to 30 min); under air [23].
Figure 7. IR spectra recorded in the course of a photopolymerization of ELO; initiating system: BPSK/Ph2I+/TTMSS (1%/2%/3% w/w) upon a fluorescent bulb irradiation (from t = 0 to 30 min); under air [23].
Molecules 20 07201 g007
Molecules 20 07201 g008 550
Figure 8. Interpenetrating polymer network production. Design of high performance photoinitiator (NA3) at 385–405 nm based on the naphthalene scaffold [118]: (left) absorption spectrum of NA3 and (right) Photopolymerization profiles of an EPOX/TMPTA blend (50%/50%, w/w) in the presence of NA3/Iod/NVK (0.5%/2%/3%, w/w/w) in laminate upon the halogen lamp exposure.
Figure 8. Interpenetrating polymer network production. Design of high performance photoinitiator (NA3) at 385–405 nm based on the naphthalene scaffold [118]: (left) absorption spectrum of NA3 and (right) Photopolymerization profiles of an EPOX/TMPTA blend (50%/50%, w/w) in the presence of NA3/Iod/NVK (0.5%/2%/3%, w/w/w) in laminate upon the halogen lamp exposure.
Molecules 20 07201 g008
Metal Nanoparticles. Finally, the simultaneous in-situ incorporation of metal nanoparticles (e.g., Ag) from a metal salt in the photopolymerizable cationic film using suitable PISs based on, e.g. malonates [119] was achieved (Figure 9). Other suitable reaction strategies have been very recently proposed: they allow the photochemical incorporation of nanoparticles NPs where the starting metal source does not exist as a salt: for example, Ti NPs have been generated in a photopolymerized EPOX matrix.
Molecules 20 07201 g009 550
Figure 9. Push-pull malonate and malonitrile based dyes in photoinitiating systems for ROP and in-situ incorporation of silver nanoparticles in EPOX matrixes upon a Xe lamp exposure: (a) TEM micrograph and (b) chemical scheme for the formation of Ag(0)NP [119].
Figure 9. Push-pull malonate and malonitrile based dyes in photoinitiating systems for ROP and in-situ incorporation of silver nanoparticles in EPOX matrixes upon a Xe lamp exposure: (a) TEM micrograph and (b) chemical scheme for the formation of Ag(0)NP [119].
Molecules 20 07201 g009

4. Conclusions

This paper shows that CP and FRPCP of cyclic monomers (here the ROP of a representative diepoxide) can now be easily triggered at any wavelengths, under air, even under low light intensity sources (LEDs, household lamps...), using more or less viscous monomer formulations, in the presence of novel photoinitiating systems. These recent results have likely introduced a breakthrough in the development of cationic PISs under visible lights, which was relatively restricted so far (although some interesting and successful results have been obtained with the conventional PISs as recalled above). Up to now, 400–700 nm light induced polymerization reactions were conveniently achieved mostly when using radical monomers. Therefore, although they present some drawbacks (e.g., oxygen inhibition, shrinkage), radical matrices were required in many applications aiming at employing soft irradiation conditions, laser lines or LEDs. According to the degree of performance attained, it seems today that cationic matrices can be used with the same success in these experimental conditions together with decisive arguments (e.g., no oxygen inhibition and less shrinkage). This certainly opens a lot of promising novel applications in various areas.

Acknowledgments

JL thanks the Institut Universitaire de France for the financial support.

Author Contributions

JL, HM and JPF designed research; JL, HM and JPF performed research and analyzed the data; JL, HM and JPF wrote the paper. All authors read and approved the final manuscript.

Conflicts of Interest

The authors declare no conflict of interest

References

  1. Macromolecular Engineering: From Precise Macromolecular Synthesis to Macroscopic Materials Properties and Applications; Matyjaszewski, K.; Gnanou, Y.; Leibler, L. (Eds.) Wiley-VCH: Weinheim, Germany, 2007; Volume 1–4.
  2. Polymer Science: A Comprehensive Reference; Matyjaszewski, K.; Möller, M. (Eds.) Elsevier: Weinheim, Germany, 2012.
  3. Penczek, S.; Duda, A.; Kubisa, P.; Slombowski, S. Ionic and Coordination Ring Opening Polymerization in Precise Macromolecular Synthesis to Macroscopic Materials Properties and Applications; Matyjaszewski, K., Gnanou, Y., Leibler, L., Eds.; Wiley-VCH: Weinheim, Germany, 2007; Volume 1–4, pp. 103–160. [Google Scholar]
  4. Photoinitiated Polymerization; Belfied, K.D.; Crivello, J.V. (Eds.) ACS Symposium Series 847; ACS: Washington, DC, USA, 2003.
  5. Fouassier, J.P.; Lalevée, J. Photoinitiators for Polymer Synthesis: Scope, Reactivity and Efficiency; Wiley-VCH: Weinheim, Germany, 2012. [Google Scholar]
  6. Davidson, S. Exploring the Science, Technology and Application of UV and EB Curing; Sita Technology Ltd: London, UK, 1999. [Google Scholar]
  7. Neckers, D.C. UV and EB at the Millenium; Sita Technology: London, UK, 1999. [Google Scholar]
  8. Radiation Curing in Polymer Science and Technology; Fouassier, J.P.; Rabek, J.F. (Eds.) Chapman & Hall: London, UK, 1993.
  9. Fouassier, J.P. Photoinitiation, Photopolymerization, Photocuring; Hanser: Münich, Germany, 1995. [Google Scholar]
  10. Pappas, S.P. UV-Curing: Science and Technology; Tech. Mark. Corp. Stamford, 1986; Plenum Press: New York, NY, USA, 1992. [Google Scholar]
  11. Photopolymerization: Fundamentals and Applications; Scranton, A.B.; Bowman, A.; Peiffer, R.W. ACS Symposium Series 673; ACS: Washington, DC, USA, 1997. [Google Scholar]
  12. Chemistry & Technology of UV & EB Formulation for Coatings, Inks and Paints; Olldring, K.; Holman, R. (Eds.) Wiley and Sita: London, UK, 1997; Volume I–VIII.
  13. Drobny, J.G. Radiation Technology for Polymers; CRC Press: Boca Raton, FL, USA, 2003. [Google Scholar]
  14. Roffey, C.G. Photogeneration of Reactive Species for UV Curing; Wiley: New York, NY, USA, 1997. [Google Scholar]
  15. Schwalm, R. UV Coatings: Basics, Recent Developments and New Applications; Elsevier: Oxford, UK, 2007. [Google Scholar]
  16. Schnabel, W. Polymer and Light; Wiley-VCH: Weinheim, Germany, 2007. [Google Scholar]
  17. Pappas, S.P. Photoinitiation of cationic and concurrent radical cationic polymerization. Part V. Progr. Org. Coat. 1985, 13, 35–64. [Google Scholar] [CrossRef]
  18. Kahveci, M.U.; Gilmaz, A.G.; Yagci, Y. Photoinitiated cationic polymerization: Reactivity and mechanistic aspects. In Photochemistry and Photophysics of Polymer Materials; Allen, N.S., Ed.; Wiley: New York, NY, USA, 2010; pp. 421–478. [Google Scholar]
  19. Yagci, Y.; Jockusch, S.; Turro, N.J. Photoinitiated polymerization: Advances, challenges, and opportunities. Macromolecules 2010, 65, 6245–6260. [Google Scholar] [CrossRef]
  20. Sangermano, M.; Razza, N.; Crivello, J.V. Cationic UV-Curing: Technology and Applications. Macromol. Mater. Eng. 2014. [Google Scholar] [CrossRef]
  21. Fouassier, J.P.; Allonas, X.; Lalevée, J. Polymerization under UV Lights. In Macromolecular Engineering: From Precise Macromolecular Synthesis to Macroscopic Materials Properties and Applications; Matyjaszewski, K., Gnanou, Y., Leibler, L., Eds.; Wiley-VCH: Weinheim, Germany, 2007; Volume 1, pp. 643–672. [Google Scholar]
  22. Crivello, J.V. Advances in the design of photoinitiators, photosensitizers and monomers for photoinitiated cationic polymerization. Des. Monomers Polym. 2002, 5, 141–154. [Google Scholar] [CrossRef]
  23. Tehfe, M.A.; Louradour, F.; Fouassier, J.P.; Lalevée, J. Photopolymerization reactions: On the way to a green and sustainable chemistry. Appl. Sci. 2013, 3, 490–514. [Google Scholar] [CrossRef]
  24. Lalevée, J.; Fouassier, J.P. Recent advances in sunlight induced polymerization. Polym. Chem. 2011, 2, 1107–1113. [Google Scholar] [CrossRef]
  25. Lalevée, J.; Fouassier, J.P. Dye Photosensitized Polymerization Reactions: Novel Perspectives, RSC Photochemistry Reports; Albini, A., Fasani, E., Eds.; Photochemistry: London, UK, 2015; Volume 42, pp. 215–232. [Google Scholar]
  26. Fouassier, J.P.; Lalevée, J. Three-component photoinitiating systems: Towards innovative tailor made high performance combinations. RSC Adv. 2012, 2, 2621–2629. [Google Scholar] [CrossRef]
  27. Xiao, P.; Zhang, J.; Dumur, F.; Tehfe, M.A.; Morlet-Savary, F.; Graff, B.; Gigmes, D.; Fouassier, J.P.; Lalevée, J. Photoinitiating systems: Recent progress in visible light induced cationic and radical photopolymerization reactions under soft conditions. Prog. Polym. Sci. 2015, 41, 32–66. [Google Scholar] [CrossRef]
  28. Fouassier, J.P.; Lalevée, J.; Morlet-Savary, F. Dyes as photoinitiators or photosensitizers of polymerization reactions. Materials 2010, 3, 5130–5142. [Google Scholar] [CrossRef]
  29. Crivello, J.V. Newer Aspects of Photoinitiated Cationic Polymerization. In Ionic Polymerizations and Related Processes; Puskas, J.E., Michel, A., Barghi, S., Eds.; NATO Sci. Series 359, NATO: Weinheim, Germany, 1999; pp. 45–60. [Google Scholar]
  30. Crivello, J.V. Cationic polymerization: Iodonium and sulfonium salt photo initiators. Adv. Polym. Sci. 1984, 62, 1–48. [Google Scholar]
  31. Yağci, Y.; Reetz, I. Externally stimulated initiator systems for cationic polymerization. Prog. Polym. Sci. 1998, 23, 1485–1538. [Google Scholar] [CrossRef]
  32. Crivello, J.V. Photopolymerization. In Polymer Science: A Comprehensive Reference; Matyjaszewski, K., Möller, M., Eds.; Elsevier: Weinheim, Germany, 2012; Volume 4 (ring-opening polymerization and special polymerization processes), pp. 919–955. [Google Scholar]
  33. Crivello, J.V.; Lam, J.H.W. Diaryliodonium salts: A new class of photoinitiators for cationic polymerization. Macromolecules 1977, 10, 1307–1315. [Google Scholar] [CrossRef]
  34. Crivello, J.V.; Lam, J.H.W. Photoinitiated cationic polymerization with triarylsulfonium salts. J. Polym. Sci. Polym. Chem. Ed. 1979, 17, 977–999. [Google Scholar] [CrossRef]
  35. Timpe, H.J.; Jockush, S.; Korner, K. Dye sensitized photopolymerization. In Radiation Curing in Polymer Science and Technology; Fouassier, J.P., Ed.; Elsevier: Barking, UK, 1993; Volume 2, pp. 575–602. [Google Scholar]
  36. Crivello, J.V. Latest developments in the chemistry of onium salts. In Radiation Curing in Polymer Science and Technology; Fouassier, J.P., Rabek, J.F., Eds.; Elsevier: Barking, UK, 1993; Volume 2, pp. 435–472. [Google Scholar]
  37. Crivello, J.V.; Dietliker, K. Photoinitiators for Free Radical Cationic and Anionic Photopolymerization; Bradley, G., Ed.; Wiley: Weinheim, Germany, 1999; pp. 125–141. [Google Scholar]
  38. Hacker, N.P. New reactions of cationic photo initiators. In Radiation Curing in Polymer Science and Technology; Fouassier, J.P., Rabek, J.F., Eds.; Elsevier: Barking, UK, 1993; Volume 2, pp. 473–504. [Google Scholar]
  39. Sahyun, M.R.; De Voe, R.J.; Olofson, P.M. Photochemistry of onium salt decomposition. In Radiation Curing in Polymer Science and Technology; Fouassier, J.P., Ed.; Elsevier: Barking, UK, 1993; Volume 2, pp. 505–529. [Google Scholar]
  40. Schnabel, W.; Bottcher, A.; Hasebe, K.; Hizal, G.; Yagci, Y.; Stellberg, P. Initiation of cationic polymerization via oxidation of free radicals using pyridinium salts. Polymer 1991, 32, 2289. [Google Scholar] [CrossRef]
  41. Aydogan, B.; Gacal, B.; Yildirim, A.; Yonet, N.; Yuksel, Y.; Yagci, Y. Wavelength tunability in photoinitiated cationic polymerization. In Photochemistry and UV Curing; Fouassier, J.P., Ed.; Research Signpost: Trivandrum, India, 2006; pp. 187–201. [Google Scholar]
  42. Colak, D.; Yurteri, S.; Kiskan, B.; Yagci, Y. Addition-fragmentation type reactions in photoinitiated cationic polymerization. In Photochemistry and UV Curing; Fouassier, J.P., Ed.; Research Signpost: Trivandrum, India, 2006; pp. 175–186. [Google Scholar]
  43. Aydogan, B.; Gundogan, A.S.; Ozturk, T.; Yagci, Y. A Dithienothiophene derivative as a long-wavelength photosensitizer for onium salt photoinitiated cationic polymerization. Macromolecules 2008, 41, 3468–3471. [Google Scholar] [CrossRef]
  44. Aydogan, B.; Yagci, Y.; Toppare, L.; Jockusch, S.; Turro, N.J. Photoinduced electron transfer reactions of highly conjugated thiophenes for initiation of cationic polymerization and conjugated polymer formation. Macromolecules 2012, 45, 7829–7834. [Google Scholar] [CrossRef]
  45. Beyazit, S.; Aydogan, B.; Osken, I.; Ozturk, T.; Yagci, Y. Long wavelength photoinitiated free radical polymerization using conjugated thiophene derivatives in the presence of onium salts. Polym. Chem. 2011, 2, 1185–1189. [Google Scholar] [CrossRef]
  46. Bulut, U.; Gunbas, G.E.; Toppare, L. A quinoxaline derivative as a long wavelength photosensitizer for diaryliodonium salts. J. Polym. Sci. Part A Polym Chem. 2010, 48, 209–213. [Google Scholar] [CrossRef]
  47. Crivello, J.V. Radical-Promoted Visible light photoinitiated cationic polymerization of epoxides. J. Macromol. Sci. Part A Pure Appl. Chem. 2009, 46, 474–483. [Google Scholar] [CrossRef]
  48. Crivello, J.V. A new visible light sensitive photoinitiator system for the cationic polymerization of epoxides. J. Polym. Sci. Part A Polym. Chem. 2009, 47, 866–875. [Google Scholar] [CrossRef]
  49. Podsiadły, R. 12H-Quinoxalino[2,3-b][1,4]benzothiazine derivatives as novel visible photosensitizers in cationic photopolymerization. J. Photochem. Photobiol. A 2009, 208, 147–153. [Google Scholar] [CrossRef]
  50. Durmaz, Y.Y.; Moszner, N.; Yagci, Y. Visible light initiated free radical promoted cationic polymerization using acylgermane based photoinitiator in the presence of onium salts. Macromolecules 2008, 41, 6714–6718. [Google Scholar] [CrossRef]
  51. Tozuka, M.; Igarashi, T.; Sakurai, T. 1-(Arylmethyloxy)-9,10-anthraquinones: Photoinitiators for Radical and Cationic Polymerizations. Polym. J. 2009, 41, 709–714. [Google Scholar] [CrossRef]
  52. Yilmaz, G.; Acik, G.; Yagci, Y. Counteranion sensitization approach to photoinitiated free radical polymerization. Macromolecules 2012, 45, 2219–2224. [Google Scholar] [CrossRef]
  53. Semih, E.; Gorkem, Y.; Colak, D.G.; Demet; Cianga, I.; Yagci, Y. Chemistry of poly(phenylene vinylene)s as sensitizers for visible light induced cationic polymerization. Macromolecules 2014, 47, 7296–7302. [Google Scholar] [CrossRef]
  54. Bi, Y.; Neckers, D.C. A visible light initiating system for free radical promoted cationic polymerization. Macromolecules 1994, 27, 3683–3693. [Google Scholar] [CrossRef]
  55. Hua, Y.; Jiang, F.; Crivello, J.V. Photosensitized onium-salt induced cationic polymerization with hydroxymethylated polynuclear aromatic hydrocarbons. Chem. Mater. 2002, 14, 2369–2377. [Google Scholar] [CrossRef]
  56. Crivello, J.V.; Jiang, M. Anthracene electron transfer photosensitizers for onium salt induced cationic photopolymerizations. J. Photochem. Photobiol. A Chem. 2003, 159, 173–188. [Google Scholar] [CrossRef]
  57. Sangermano, M.; Crivello, J.V. Visible and Long-Wavelength Cationic Photopolymerization; ACS Symposium Series 847 (Photoinitiated Polymerization); ACS: Washington, DC, USA, 2003; pp. 242–252. [Google Scholar]
  58. Hua, Y.; Crivello, J.V. Photosensitization of Onium Salt Initiated Cationic Photopolymerizations by Carbazole Monomers, Polymers, and Oligomers; ACS Symposium Series 847 (Photoinitiated Polymerization); ACS: Washington, DC, USA, 2003; pp. 219–230. [Google Scholar]
  59. Crivello, J.V. Synergistic Free Radical Effects in Photoinitiated Cationic Polymerization; ACS Symposium Series 847 (Photoinitiated Polymerization); ACS: Washington, DC, USA, 2003; pp. 178–186. [Google Scholar]
  60. Gomurashvili, Z.; Crivello, J.V. Monomeric and polymeric phenothiazine photosensitizers for photoinitiated cationic polymerization. Macromolecules 2002, 35, 2962–2969. [Google Scholar] [CrossRef]
  61. Yilmaz, G.; Beyazit, S.; Yagci, Y. Visible light induced free radical promoted cationic polymerization using thioxanthone derivatives. J. Polym. Sci. Part A Polym Chem. 2011, 49, 1591–1596. [Google Scholar] [CrossRef]
  62. Crivello, J.V.; Sangermano, M. Visible and long-wavelength photoinitiated cationic polymerization. J. Polym. Sci. Part A Polym. Chem. 2001, 39, 343–356. [Google Scholar] [CrossRef]
  63. Crivello, J.V.; Kong, S. Long-wavelength-absorbing dialkylphenacylsulfonium salt photoinitiators: Synthesis and photoinduced cationic polymerization. J. Polym. Sci. Part A Polym. Chem. 2000, 38, 1433–1442. [Google Scholar] [CrossRef]
  64. Toba, Y. Anthracene-sensitized polymerization of vinyl ethers by onium tetrakis(pentafluorophenyl)borate initiators. J. Polym. Sci. Part A Polym. Chem. 2000, 38, 982–987. [Google Scholar] [CrossRef]
  65. Hartwig, A.; Harder, A.; Lühring, A.; Schröder, H. (9-Oxo-9H-fluoren-2-yl)-phenyl-iodonium hexafluoroantimonate(V)—A photoinitiator for the cationic polymerisation of epoxides. Eur. Polym. J. 2001, 37, 1449–1455. [Google Scholar] [CrossRef]
  66. Wang, T.; Ma, L.J.; Wan, P.Y.; Liu, J.P.; Wang, F. A study of the photoactivities and thermomechanical properties of epoxy resins using novel [cyclopentadien-Fe-arene]+PF6− photoinitiators. J. Photochem. Photobiol. A 2004, 163, 77–86. [Google Scholar] [CrossRef]
  67. Crivello, J.V.; Bulut, U. Indian turmeric and its use in cationic photopolymerizations. Macromol. Symp. 2006, 240, 1–11. [Google Scholar] [CrossRef]
  68. Norcini, G.; Casiraghi, A.; Visconti, M.; Li, G. Bassi, Sulfonium Salts as Photo Initiators for Radiation Curable Systems. EP 1417198 B1, 8 May 2009. [Google Scholar]
  69. Crivello, J.V.; Ma, J.; Jiang, F. Synthesis and photoactivity of novel 5-arylthianthrenium salt cationic photoinitiators. J. Polym. Sci. Part A Polym. Chem. 2002, 40, 3465–3480. [Google Scholar] [CrossRef]
  70. Li, M.; Chen, Y.; Zhang, H.; Wang, T. A novel ferrocenium salt as visible light photoinitiator for cationic and radical photopolymerization. Prog. Org. Coat. 2010, 68, 234–239. [Google Scholar] [CrossRef]
  71. Kreutzer, J.; Demir, K.D.; Yagci, Y. Synthesis and characterization of a double photochromic initiator for cationic polymerization. Eur. Polym. J. 2011, 47, 792–799. [Google Scholar] [CrossRef]
  72. Crivello, J.V.; Aldersley, M.F. Supramolecular diaryliodonium salt-crown ether complexes as cationic photoinitiators. J. Polym. Sci. Part A Polym. Chem. 2013, 51, 801–814. [Google Scholar] [CrossRef]
  73. Corakci, B.; Hacioglu, S.O.; Toppare, L.; Bulut, U. Long wavelength photosensitizers in photoinitiated cationic polymerization: The effect of quinoxaline derivatives on photopolymerization. Polymer 2013, 54, 3182–3187. [Google Scholar] [CrossRef]
  74. Bulut, U.; Yilmaz, S.; Yigitsoy, B.; Toppare, L. Long Wavelength Photosensitizers for Diaryliodonium Salts Based on the 2-Benzyl-2H-benzo[d][1,2,3]triazole Skeleton. J. Macromol. Sci. Part A Pure Appl. Chem. 2012, 49, 445–449. [Google Scholar] [CrossRef]
  75. Podsiadły, R.; Maruszewska, A.; Michalski, R.; Marcinek, A.; Kolińska, J. Naphthoylenebenzimidazolone dyes as electron transfer photosensitizers for iodonium salt induced cationic photopolymerizations. Dyes Pigm. 2012, 95, 252–259. [Google Scholar] [CrossRef]
  76. Durmaz, Y.Y.; Zaim, O.; Yagci, Y. Diethoxy-azobis(pyridinium) Salt as photoinitiator for cationic polymerization: Towards wavelength tunability by cis–trans isomerization. Macromol. Rapid Commun. 2008, 29, 892–896. [Google Scholar] [CrossRef]
  77. Aydogan, B.; Gunbas, G.E.; Durmus, A.; Toppare, L.; Yagci, Y. Highly conjugated thiophene derivatives as new visible light sensitive photoinitiators for cationic polymerization. Macromolecules 2009, 43, 101–106. [Google Scholar] [CrossRef]
  78. Schroeder, W.F.; Asmussen, S.V.; Sangermano, M.; Vallo, C.I. Visible light polymerization of epoxy monomers using an iodonium salt with camphorquinone/ethyl-4-dimethyl aminobenzoate. Polym. Int. 2013, 62, 1368–1376. [Google Scholar] [CrossRef]
  79. Durmaz, Y.Y.; Kukut, M.; Moszner, N.; Yagci, Y. Sequential photodecomposition of bisacylgermane type photoinitiator: Synthesis of block copolymers by combination of free radical promoted cationic and free radical polymerization mechanisms. J. Polym. Sci. Part A Polym. Chem. 2009, 47, 4793–4799. [Google Scholar] [CrossRef]
  80. Durmaz, Y.Y.; Yilmaz, G.; Tasleden, M.A.; Aydogan, B.; Koz, B.; Yagci, Y. N-alkoxy pyridinium salt photoinitiators. In Basics and Applications of Photopolymerization Reactions; Fouassier, J.P., Allonas, X., Eds.; Research Signpost: Trivandrum, India, 2010; pp. 7–22. [Google Scholar]
  81. Liu, G.; Zhu, X.; Xu, B.; Qian, X.; Song, G.; Nie, J. Cationic photopolymerization of bisphenol A diglycidyl ether epoxy under 385 nm. J. Appl. Polym. Sci. 2013, 130, 3698–3703. [Google Scholar] [CrossRef]
  82. Uchida, N.; Nakano, H.; Igarashi, T.; Sakurai, T. Nonsalt 1-(arylmethyloxy)pyrene photoinitiators capable of initiating cationic polymerization. J. Appl. Polym. Sci. 2014, 131. [Google Scholar] [CrossRef]
  83. Taskin, O.S.; Erel-Goktepe, I.; Khan, M.A.A.; Pispas, S.; Yagci, Y. Polystyrene-b-poly(2-vinyl phenacyl pyridinium) salts as photoinitiators for free radical and cationic polymerizations and their photoinduced molecular associations. J. Photochem. Photobiol. A Chem. 2014, 285, 30–36. [Google Scholar] [CrossRef]
  84. Tunc, D.; Yagci, Y. Thioxanthone-ethylcarbazole as a soluble visible light photoinitiator for free radical and free radical promoted cationic polymerizations. Polym. Chem. 2011, 2, 2557–2563. [Google Scholar] [CrossRef]
  85. Yilmaz, G.; Iskin, B.; Yilmaz, F.; Yagci, Y. Visible Light-Induced Cationic Polymerization Using Fullerenes. ACS Macro Lett. 2012, 1, 1212–1215. [Google Scholar] [CrossRef]
  86. Chen, H.; Yang, J.; Guo, D.; Wang, L.; Nie, J. Photopolymerization kinetics of a disulfone cationic photoinitiator. J. Photochem. Photobiol. A Chem. 2012, 232, 57–63. [Google Scholar] [CrossRef]
  87. Muller, U.; Utterodt, A.; Morke, W.; Deubzer, B.; Herzig, C. Diazonium Salts as Cationic Photoinitiators: Radical and Cationic Aspects; ACS Symposium Series 847 (Photoinitiated Polymerization); ACS: Washington, DC, USA, 2003; pp. 202–212. [Google Scholar]
  88. Milanesi, S.; Fagnoni, M.; Albini, A. (Sensitized) photolysis of diazonium salts as a mild general method for the generation of aryl cations. Chemoselectivity of the singlet and triplet 4-substituted phenyl cations. J. Org. Chem. 2005, 70, 603–610. [Google Scholar]
  89. Cunningham, A.F.; Desobry, V. Metal based photo initiators. In Radiation Curing in Polymer Science and Technology; Fouassier, J.P., Rabek, J.F., Eds.; Elsevier: Barking, UK, 1993; Volume 2, pp. 323–374. [Google Scholar]
  90. Ivan, M.G.; Scaiano, J.C. Photoimaging and lithographic processes in polymers. In Photochemistry and Photophysics of Polymer Materials; Allen, N.S., Ed.; Wiley: New York, NY, USA, 2010; pp. 479–508. [Google Scholar]
  91. Castellanos, F.; Fouassier, J.P.; Priou, C.; Cavezzan, J. Synthesis, reactivity, and properties of new diaryliodonium salts as photoinitiators for the cationic polymerization of epoxy silicones. J. Appl. Polym. Sci. 1996, 60, 705–713. [Google Scholar] [CrossRef]
  92. Golaz, B.; Michaud, V.; Leterrier, Y.; Månson, J.-E. UV intensity, temperature and dark-curing effects in cationic photo-polymerization of a cycloaliphatic epoxy resin. Polymer 2012, 53, 2038–2048. [Google Scholar] [CrossRef]
  93. Park, H.J.; Ryu, C.Y.; Crivello, J.V. Photoinitiated cationic polymerization of limonene 1,2-oxide and α-pinene oxide. J. Polym. Sci. Part A Polym. Chem. 2013, 51, 109–117. [Google Scholar] [CrossRef]
  94. Lalevée, J.; Tehfe, M.A.; Morlet-Savary, F.; Graff, B.; Allonas, X.; Fouassier, J.P. Oxygen mediated and wavelength tunable cationic photopolymerization reactions under air and low intensity: A new concept. Prog. Org. Coat. 2011, 70, 23–31. [Google Scholar] [CrossRef]
  95. Fouassier, J.P.; Lalevée, J. Design of chromophores for photoinitiators of polymerization: Brief survey and recent achievements. In New Developments in Chromophore Research; Nova Science Publishers: Hauppauge, NY, USA, 2013. [Google Scholar]
  96. Lalevée, J.; El Roz, M.; Allonas, X.; Fouassier, J.P. On the silyl radical chemistry in photopolymerization reactions. In Organosilanes: Properties, Performance and Applications; Wyman, E., Skief, M.C., Eds.; Nova Science Publishers: Hauppauge, NY, USA, 2009; Chapter 6. [Google Scholar]
  97. Lalevée, J.; Fouassier, J.P. Overview of radical initiation. In Handbook of Radical Chemistry & Biology; Studer, A., Chatgilialoglou, C., Eds.; Wiley: Weinheim, Germany, 2012; Volume 1, Chapter 2. [Google Scholar]
  98. Telitel, S.; Blanchard, N.; Schweizer, S.; Morlet-Savary, F.; Graff, B.; Fouassier, J.-P.; Lalevée, J. BODIPY derivatives and boranil as new photoinitiating systems of cationic polymerization exhibiting a tunable absorption in the 400–600 nm spectral range. Polymer 2013, 54, 2071–2076. [Google Scholar] [CrossRef]
  99. Tehfe, M.-A.; Dumur, F.; Graff, B.; Morlet-Savary, F.; Gigmes, D.; Fouassier, J.-P.; Lalevee, J. Design of new type I and type II photoinitiators possessing highly coupled pyrene-ketone moieties. Polym. Chem. 2013, 4, 2313–2324. [Google Scholar] [CrossRef]
  100. Lalevée, J.; Tehfe, M.-A.; Dumur, F.; Gigmes, D.; Graff, B.; Morlet-Savary, F.; Fouassier, J.-P. Light-Harvesting Organic Photoinitiators of Polymerization. Macromol. Rapid Commun. 2013, 34, 239–245. [Google Scholar] [CrossRef] [PubMed]
  101. Tehfe, M.-A.; Dumur, F.; Graff, B.; Clément, J.-L.; Gigmes, D.; Morlet-Savary, F.; Fouassier, J.-P.; Lalevée, J. New cleavable photoinitiator architecture with huge molar extinction coefficients for polymerization in the 340–450 nm range. Macromolecules 2013, 46, 736–746. [Google Scholar] [CrossRef]
  102. Zhang, J.; Frigoli, M.; Dumur, F.; Xiao, P.; Ronchi, L.; Morlet-Savary, F.; Graff, B.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. Design of novel photoinitiators for radical and cationic photopolymerizations under UV and visible LEDs (385, 395, 405 and 455 nm). Macromolecules 2014. [Google Scholar] [CrossRef]
  103. Tehfe, M.; Dumur, F.; Graff, B.; Gigmes, D.; Fouassier, J.P.; Lalevée, J. Blue-to-red light sensitive push-pull structured photoinitiators: indanedione derivatives for radical and cationic photopolymerization reactions. Macromolecules 2013, 46, 3332–3341. [Google Scholar] [CrossRef]
  104. Telitel, S.; Lalevée, J.; Blanchard, N.; Kavalli, T.; Tehfe, M.-A.; Schweizer, S.; Morlet-Savary, F.; Graff, B.; Fouassier, J.-P. Photopolymerization of cationic monomers and acrylate/divinylether blends under visible light using pyrromethene dyes. Macromolecules 2012, 45, 6864–6868. [Google Scholar] [CrossRef]
  105. Xiao, P.; Dumur, F.; Graff, B.; Gigmes, D.; Fouassier, J.P.; Lalevée, J. Blue light sensitive dyes for various photopolymerization reactions: Naphthalimide and naphthalic anhydride derivatives. Macromolecules 2014, 47, 601–608. [Google Scholar] [CrossRef]
  106. Lalevée, J.; Blanchard, N.; Tehfe, M.A.; Morlet-Savary, F.; Fouassier, J.P. Green bulb light source induced epoxy cationic polymerization under air using tris(2,2'-bipyridine)ruthenium(II) and silyl radicals. Macromolecules 2010, 43, 10191–10195. [Google Scholar] [CrossRef]
  107. Lalevée, J.; Peter, M.; Dumur, F.; Gigmes, D.; Blanchard, N.; Tehfe, M.A.; Morlet-Savary, F.; Fouassier, J.P. Subtle ligand effects in oxidative photocatalysis with iridium complexes: Application to photopolymerization. Chem. Eur. J. 2011, 17, 15027–15031. [Google Scholar] [CrossRef] [PubMed]
  108. Lalevée, J.; Tehfe, M.A.; Dumur, F.; Gigmes, D.; Blanchard, N.; Morlet-Savary, F.; Fouassier, J.P. Iridium photocatalysts in free radical photopolymerization under visible lights. ACS Macro Lett. 2012, 1, 286–290. [Google Scholar] [CrossRef]
  109. Lalevée, J.; Dumur, F.; Mayer, C.R.; Gigmes, D.; Nasr, G.; Tehfe, M.A.; Telitel, S.; Morlet-Savary, F.; Graff, B.; Fouassier, J.P. Photopolymerization of N-Vinylcarbazole using visible-light harvesting iridium complexes as photoinitiators. Macromolecules 2012, 45, 4134–4141. [Google Scholar] [CrossRef]
  110. Xiao, P.; Hong, W.; Li, Y.; Dumur, F.; Graff, B.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. Green light sensitive diketopyrrolopyrrole derivatives used in versatile photoinitiating systems for photopolymerizations. Polym. Chem. 2014, 5, 2293–2300. [Google Scholar] [CrossRef]
  111. Tehfe, M.A.; Lalevée, J.; Morlet-Savary, F.; Graff, B.; Blanchard, N.; Fouassier, J.P. Tunable organophotocatalysts for polymerization reactions under visible lights. Macromolecules 2012, 45, 1746–1752. [Google Scholar] [CrossRef]
  112. Tehfe, M.A.; Lalevée, J.; Morlet-Savary, F.; Graff, B.; Fouassier, J.P. A breakthrough toward long wavelength cationic photopolymerization: Initiating systems based on violanthrone derivatives and silyl radicals. Macromolecules 2011, 44, 8374–8379. [Google Scholar] [CrossRef]
  113. Xiao, P.; Dumur, F.; Graff, B.; Gigmes, D.; Fouassier, J.P.; Lalevée, J. Red-light-induced cationic photopolymerization: Perylene derivatives as efficient photoinitiators. Macromol. Rapid Commun. 2013, 34, 1452–1458. [Google Scholar] [CrossRef] [PubMed]
  114. Xiao, P.; Dumur, F.; Graff, B.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. Cationic and thiol-ene photopolymerization upon red lights using anthraquinone derivatives as photoinitiators. Macromolecules 2013, 46, 6744–6750. [Google Scholar] [CrossRef]
  115. Tehfe, M.-A.; Dumur, F.; Vilà, N.; Graff, B.; Mayer, C.R.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. A multicolor photoinitiator for cationic polymerization and interpenetrated polymer network synthesis: 2,7-Di-tert-butyldimethyldihydropyrene. Macromol. Rapid Commun. 2013, 34, 1104–1109. [Google Scholar] [CrossRef] [PubMed]
  116. Xiao, P.; Dumur, F.; Bui, T.T.; Goubard, F.; Graff, B.; Morlet-Savary, F.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. Panchromatic photopolymerizable cationic films using indoline and squaraine dyes based photoinitiating systems. ACS Macro Lett. 2013, 2, 736–740. [Google Scholar] [CrossRef]
  117. Tehfe, M.A.; Lalevée, J.; Gigmes, D.; Fouassier, J.P. Green Chemistry: Sunlight induced cationic polymerization of renewable epoxy monomer under air. Macromolecules 2010, 43, 1364–1370. [Google Scholar] [CrossRef]
  118. Xiao, P.; Dumur, F.; Graff, B.; Morlet-Savary, F.; Fouassier, J.P.; Gigmes, D.; Lalevée, J. Novel attempts for the design of photoinitiators at 385–405 nm: Search around the naphtalene scaffold. Macromolecules 2014. [Google Scholar] [CrossRef]
  119. Mokbel, H.; Dumur, F.; Telitel, S.; Vidal, L.; Xiao, P.; Versace, D.-L.; Tehfe, M.-A.; Morlet-Savary, F.; Graff, B.; Fouassier, J.-P.; et al. Photoinitiating systems of polymerization and in situ incorporation of metal nanoparticles into polymer matrices upon exposure to visible light: Push-pull malonate and malononitrile based dyes. Polym. Chem. 2013, 4, 5679–5687. [Google Scholar]

Share and Cite

MDPI and ACS Style

Lalevée, J.; Mokbel, H.; Fouassier, J.-P. Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources. Molecules 2015, 20, 7201-7221. https://doi.org/10.3390/molecules20047201

AMA Style

Lalevée J, Mokbel H, Fouassier J-P. Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources. Molecules. 2015; 20(4):7201-7221. https://doi.org/10.3390/molecules20047201

Chicago/Turabian Style

Lalevée, Jacques, Haifaa Mokbel, and Jean-Pierre Fouassier. 2015. "Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources" Molecules 20, no. 4: 7201-7221. https://doi.org/10.3390/molecules20047201

APA Style

Lalevée, J., Mokbel, H., & Fouassier, J. -P. (2015). Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources. Molecules, 20(4), 7201-7221. https://doi.org/10.3390/molecules20047201

Article Metrics

Back to TopTop