Next Article in Journal
Formation of Lignin Nanoparticles by Combining Organosolv Pretreatment of Birch Biomass and Homogenization Processes
Next Article in Special Issue
Effect of CaCO3 Nanoparticles on the Mechanical and Photo-Degradation Properties of LDPE
Previous Article in Journal
Theoretical Prediction of the Complex P-Glycoprotein Substrate Efflux Based on the Novel Hierarchical Support Vector Regression Scheme
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 23
Issue 7
10.3390/molecules23071821
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A Novel AgNPs/Sericin/Agar Film with Enhanced Mechanical Property and Antibacterial Capability

by
Yejing Wang
1,2,†,
Rui Cai
1,†,
Gang Tao
2,
Peng Wang
1,
Hua Zuo
3,
Ping Zhao
2,4,
Ahmad Umar
5 and
Huawei He
2,4,*
1
College of Biotechnology, Southwest University, Beibei, Chongqing 400715, China
2
State Key Laboratory of Silkworm Genome Biology, Southwest University, Beibei, Chongqing 400715, China
3
College of Pharmaceutical Sciences, Southwest University, Beibei, Chongqing 400715, China
4
Chongqing Engineering and Technology Research Center for Novel Silk Materials, Southwest University, Beibei, Chongqing 400715, China
5
Department of Chemistry, College of Science and Arts and Promising Centre for Sensors and Electronics Devices, Najran University, P.O. Box 1988, Najran 11001, Saudi Arabia
*
Author to whom correspondence should be addressed.
†
These authors have equal contributions to this work.
Molecules 2018, 23(7), 1821; https://doi.org/10.3390/molecules23071821
Submission received: 17 June 2018 / Revised: 5 July 2018 / Accepted: 11 July 2018 / Published: 23 July 2018
(This article belongs to the Special Issue Nanocomposites of Polymers and Inorganic Particles)
Browse Figures
Versions Notes

Abstract

:
Silk sericin is a protein from a silkworm’s cocoon. It has good biocompatibility, hydrophilicity, bioactivity, and biodegradability. However, sericin could not be used in biomedical materials directly because of its frangible characteristic. To develop multifunctional sericin-based materials for biomedical purposes, we prepared a sericin/agar (SS/agar) composite film through the blending of sericin and agar and repetitive freeze-thawing. Then, we synthesized silver nanoparticles (AgNPs) in situ on the surface of the composite film to endow it with antibacterial activity. Water contact angle, swelling and losing ratio, and mechanical properties analysis indicated that the composite film had excellent mechanical property, hydrophilicity, hygroscopicity, and stability. Scanning electron microscopy and X-ray photoelectron spectroscopy analysis confirmed the successful modification of AgNPs on the composite film. X-ray powder diffraction showed the face-centered cubic structures of the AgNPs. This AgNPs modified composite film exhibited an excellent antibacterial capability against Escherichia coli and Staphylococcus aureus. Our study develops a novel AgNPs/sericin/agar composite film with enhanced mechanical performance and an antimicrobial property for potential biomedical applications.

1. Introduction

Recently, it appears promising to combine the outstanding properties of natural protein and polysaccharides for biomedical applications [1]. As a natural macromolecular protein, silk sericin (SS) is composed of 25% of the cocoon that is produced by the silkworm [2,3]. Sericin is composed of 18 different amino acids [4]. As sericin has a content of serine that is about 33.43% [5], it is considered as a natural moisturizing factor for the human skin due to its excellent moisture retention capacity [6]. Sericin is not expensive, is readily available, is biocompatible, and biodegradable [7,8,9]. Sericin is a biologically active substance in wound dressings due to its diverse activities such as ROS clearance, anti-tyrosinase, and its immunomodulatory capacity [10,11]. In addition, sericin can promote skin keratinocytes and fibroblasts adhesion and proliferation [12,13,14,15], especially for cell growth and migration [16,17], which makes it favorable for wound dressing and tissue engineering applications [18,19,20,21]. Sericin can efficiently promote wound healing by accelerating collagen deposition and the re-epithelialization of skin tissue [22]. However, sericin has a large amount of disordered structures [23,24], resulting in its poor mechanical performance [25]. Thus, crosslinking, blending, or copolymerizing with other substances is often applied to overcome the brittleness of sericin [26].
Agar is a kind of unbranched polysaccharide that is produced by seaweed [27]. It can spontaneously form gels at a very low concentration. Hence, it is widely applied in the food industry, the pharmaceutical industry, and in cosmetics [28,29]. In addition, agar is applied in biomaterials for its high mechanical strength and biocompatibility [30]. It is promising to combine the outstanding properties of sericin and agar to produce a novel composite material with suitable mechanical properties and good biocompatibility for biomedical applications such as tissue engineering and wound healing.
Surface immobilization with an antimicrobial agent is a common method to prepare antibacterial materials. Silver nanoparticle (AgNP) has broad-spectrum antimicrobial activities [31,32,33,34] and rarely leads to drug resistance [35]. Also, AgNP has good cytocompatibility [36,37]. AgNP has an anti-inflammatory effect which is beneficial for wound healing [38,39]. AgNPs are commonly modified on materials after synthesis. The traditional procedure is too complicated and time-consuming to be abandoned [40,41,42]. The biosynthesis of AgNPs is a safe and environmentally friendly method and has received increasing attention [43,44]. However, biosynthesis is too difficult to ensure the in situ synthesis of AgNPs. UV irradiation is usually used to in situ synthesize AgNPs on the surface of materials [45,46,47]. Here, we blended sericin and agar to prepare a SS/agar film through freeze-thawing for four cycles. Then, the AgNPs were immobilized on the composite film for their antimicrobial purpose.

2. Results and Discussion

Here, we prepared a SS/agar film through blending without an extra cross-linking agent. Sericin was extracted into water through autoclave. A high temperature (60 °C) promoted the blending of sericin and agar. As the temperature decreased, the mixture gelled to form a novel SS/agar film. UV-assisted synthesis is a facile and green approach to synthesize AgNPs in situ on the surface of a material without chemical cross-linking reagents. Here, UV irradiation was used to promote the synthesis of AgNPs. Then, the antimicrobial property of the composite film was evaluated by inhibition zone and bacterial growth assays. The diagram of the fabrication and antimicrobial analysis of AgNPs/SS/ agar film are shown in Figure 1.
To determine the effects of the agar contents on the performance of the SS/agar film, the mechanical performance of the SS/agar films with different agar contents were determined. The stress and strain of the SS/agar film increased with increasing agar content in the dry state (Figure 2a,b), respectively. The sericin film failed to test as it was too brittle. The pure agar film had the highest stress and strain. The stress and strain of the SS/agar film (1:1) were 74.3 ± 10.6 MPa and 19.4 ± 4.6%, respectively, which were the highest of the tested films. Figure 2c,d showed a similar tendency in a wet state. The result suggested that agar could significantly improve the rigidity and flexibility of the sericin film. In a wet state, the strain of the SS/agar film (1:1) was 30.3 ± 1.7%, which was higher than that of the film in a dry state, indicating that SS/agar film had better flexibility in the wet state than in the dry state. Our result suggested that the prepared SS/agar film had good rigidity and flexibility, which may have a potential application in biomaterials such as wound dressing and tissue engineering [48,49,50].
The water contact angle is an important feature of a material’s surface hydrophobicity. A water contact angle that is less than 90° indicates that the material is hydrophilic. The agar film had a water contact angle of 84.3°. Increasing sericin’s content resulted in a decrease of the water contact angle from 84.3° to 38.8° (Figure 3), indicating that sericin could significantly improve the hydrophilicity of the agar film. This is related to the hydrophilicity of sericin as it contains a great deal of hydrophilic groups.
Swellability indicates the water absorption capacity. The pure agar film had a swelling ratio of 1599.1 ± 84.7% after 12 h (Figure 4a), indicating its good hygroscopicity [27]. The swelling ratio of the SS/agar film increased with the increase of agar content, suggesting that agar could improve the swellability of the SS/agar film. The SS/agar film (1:1) had a swelling ratio of 472.3 ± 9.2% after 12 h (Figure 4a), suggesting that it had good hygroscopicity. The excellent hydrophilicity and swellability are beneficial to the SS/agar film as a wound dressing to keep a moisture microenvironment around the wound interface to promote wound healing.
The losing ratio is an indicator of a material’s stability. The pure agar film had the lowest losing ratio in all of the films. The losing ratio of the SS/agar film decreased with the increase of agar content (Figure 4b), suggesting that agar could improve the stability of the SS/agar film. The SS/agar film (1:1) had a losing ratio of 10.6 ± 0.8% after 24 h (Figure 4b), indicating that it had good stability.
Stability is very important for a wound dressing. The mass loss of the SS/agar film in the PBS buffer (pH 7.4) was used to evaluate its stability. After 80 days, the agar film and the SS/agar film (1:1) lost about 48.5% and 55.6% of the initial mass (Figure 5), respectively. The mass loss ratio of the SS/agar film increased with increasing sericin content. Our result indicated the excellent stability of the SS/agar film.
Taken together, the results suggested that the SS/agar film (1:1) had good mechanical performance, excellent hydrophilicity, hygroscopicity, and stability. As a result, the SS/agar film (1:1) was selected for the following experiments.
The surface morphologies of the composite films were characterized by scanning electron microscopy (SEM). As shown in Figure 6a,b, the SS/agar film had a smooth and uniform surface without any defects, indicating that the agar and sericin were well blended. Some small dots appeared on the SS/agar film after UV irradiation for 10 min (Figure 6c,d), indicating the successful synthesis of AgNPs. The synthesized AgNPs had a size range of 20–50 nm (Figure 6d). Increasing the irradiation time promoted AgNPs synthesis (Figure 6e–h). After UV irradiation for 30 min and 60 min, most of the AgNPs had a size range of 20–60 nm and 20–80 nm, respectively (Figure 6f–h). This result suggested that UV irradiation time could regulate AgNPs synthesis. EDS spectrum showed a featured peak of silver element (Figure 6i), indicating the existence of silver on the AgNPs/SS/agar film. The other featured peaks, such as carbon, nitrogen, and oxygen, were suggested to be from the sericin and agar of the film (Figure 6i).
X-ray powder diffraction (XRD) was performed to characterize the composite films, as shown Figure 7a. The peak that was located at 19.4° and 13.9° could be assigned to the featured pattern of sericin [51] and the crystalline diffraction of agar [28,30], respectively. The AgNPs/SS/agar film had a significant XRD peak at 38.2°, indicating that the synthesized AgNPs had the crystal planes (111) structure [52,53]. The excellent crystalline structure of the AgNPs implied its efficient antimicrobial activity.
The FT-IR spectra showed the featured peaks of sericin at 1619 cm−1 and 1521 cm−1 (Figure 7b), which are assigned to the amide I and II of the β-sheet structure [54,55]. The specific bands of agar at 3350 cm−1 and 2920 cm−1 were associated with the stretching vibration of the O-H and C-H bonds, respectively. The bands at 1640 cm−1 and 1373 cm−1 were assigned to the stretching vibration of the peptide bonds. The bands at 1072 cm−1 and 1045 cm−1 were related to the vibration of the C-O bond [28]. After blending with agar, the amide I, II, and III bands of sericin did not change, indicating that the blending did not obviously affect sericin’s structure. In addition, after the AgNPs modification on the surface of the SS/agar film, the amide bands of sericin did not change, suggesting that the modification had no effect on the SS/agar film’s structure.
X-ray photoelectron spectroscopy (XPS) was carried out to reveal the chemical valence of the synthesized silver. Ag (3d5/2) and Ag (3d3/2) had the binding energies of 368.08 eV and 374.08 eV (Figure 8), respectively, indicating the formation of Ag0 [56,57]. Further, the Ag (3d) peak was analyzed by a deconvolution algorithm. Ag, Ag2O, and AgO have the binding energies of 368.5 eV, 368.3 eV, and 367.7 eV, respectively. Our result suggested that the synthesized AgNPs were composed of about 95% Ag0, 1% Ag2O, and 4% AgO.
E. coli and S. aureus were chosen as the model of Gram-negative and Gram-positive bacteria to assess the bactericidal activities of the AgNPs/SS/agar film. The inhibition zone assay showed that no inhibition rings appeared in the presence of the SS/agar film, either on E. coil or S. aureus agar plates. Whereas, the AgNPs/SS/agar films formed obvious inhibition rings on E. coil or S. aureus agar plates (Figure 9), indicating the excellent antimicrobial activity of the composite film. We measured the diameter of the inhibition rings that were formed, and these are listed in Table 1. There was a statistical difference between the groups for S. aureus, but there was no significant difference between the groups for E. coli. This result showed that the diameter of the inhibition ring increased with the increase of UV irradiation time, indicating that increasing the UV irradiation time promoted the synthesis of AgNPs and enhanced the antibacterial capability of the AgNPs/SS/agar film on E. coli or S. aureus.
A bacterial growth assay was performed to further measure the antibacterial activity of the composite film. The bacterial growth showed a similar tendency in the presence of the SS/agar film with that of the control. Nevertheless, in the presence of the AgNPs/SS/agar films, the bacterial growth was obviously inhibited, either for E. coil or S. aureus (Figure 10). This result was in good agreement with that of the inhibition zone assay, suggesting that the AgNPs/SS/agar film had excellent antimicrobial activity against E. coil and S. aureus. The AgNPs/SS/agar film with UV irradiation for 60 min showed the best inhibitory effect on the bacterial growth among all of the tested films, either for E. coli or S. aureus. Given the results of the inhibition zone and bacterial growth assay, the AgNPs modified SS/agar film with UV irradiation for 60 min had the best inhibitory effect on bacteria.
To compare the antibacterial property of Ag (I) ions and AgNPs on E. coli, a bacterial colony counting assay was performed. The result showed that the number of bacterial colonies that were treated by the AgNO3/SS/agar film was much more than that of the bacterial colonies that were treated by the AgNPs/SS/agar film (Figure 11), indicating that the AgNPs had a more significant antibacterial effect than the Ag (I) ions on E. coli.

3. Materials and Methods

3.1. Materials and Reagents

Silkworm cocoons were kindly provided by the State Key Laboratory of Silkworm Genome Biology, Southwest University, China. In our laboratory, we reared a practical strain of silkworm 872 with fresh mulberry leaves at 25 °C under a photoperiod of 12 h light and 12 h dark and 75% relative humidity. We collected the cocoons for sericin preparation. Agar and AgNO3 (99.99%) were products of Aladdin (Shanghai, China). Ultrapure water that was used in the experiment was prepared by a Milli-Q system (Millipore, Burlington, MA, USA).

3.2. Fabrication of the SS/Agar Film

Sericin was obtained from the silk cocoon as previously reported [58]. The silk cocoons were sliced and autoclaved at 121 °C and 103.4 kPa for 15 min to extract sericin into the water. The insoluble silk fibroin was removed by filtration. The sericin solution was lyophilized to sericin powder. The sericin powder was dissolved in water to become 2% (w/v) sericin solution at 60 °C. The agar was dissolved in water with continuous stirring at 85 °C. Different volume ratios of sericin (2%, w/v) and agar (2%, w/v) were well blended at 60 °C for 15 min and were then air-dried at 37 °C to become the SS/agar film.

3.3. AgNPs Synthesis

AgNPs synthesis with the assistance of UV irradiation is a popular method [59,60]. First, the SS/agar film was soaked in AgNO3 solution (50 mM) at 25 °C, then the film and AgNO3 were exposed to UV irradiation for 10, 30, or 60 min. Ag+ was reduced to AgNPs in situ on the SS/agar film with the assistance of UV light. Finally, the AgNPs modified SS/agar film was removed from the AgNO3 solution and was air-dried at 37 °C.

3.4. Mechanical Property

The mechanical performance of the SS/agar films were evaluated as the stress and strain that was measured on an AG-Xplus universal machine (Shimadzu, Kyoto, Japan). Each film was sliced into a long strip (5.5 cm × 1 cm). The strip’s thickness was determined by an Olympus microscope. Each film was measured at least 10 times and the average value was converted to the stress and strain [61].

3.5. Wettability

The film’s wettability was assessed by the water contact angle which was measured on a Krüss DSA100 system (Hamburg, Germany) at 25 °C. To do this, 4 μL of water was dropped on the surface of the film. The complete process of water absorption at five different positions was recorded for each film. The water contact angle was calculated and averaged from five independent measurements.

3.6. Swelling and Losing Ratio

The swelling ratio was determined to measure the film’s hygroscopicity, as described by Mandal et al. [62]. After weighing, the dried films (3 cm × 3 cm) were immersed in 10 mL of PBS buffer (pH 7.4) for 12–48 h at 37 °C. Then, the films were taken out from the PBS buffer and were weighed after the removal of the extra water on the surface of the films. The mass of the dried and swollen films were weighed as W1 and W2, respectively. Each film was measured at least five times. The swelling ratio was calculated using the Formula (1):
  S ( % ) = W 2 − W 1 W 1 × 100 %  
The losing ratio was measured to determine the stability of the film. Each sample (3 cm × 3 cm) was immersed in 10 mL of PBS buffer (pH 7.4) for 24–48 h at 37 °C. Then, the film was separated from the PBS buffer and was dried at 65 °C. The initial mass of the SS/agar film and the residual mass of the film after the treatment were weighed as W3 and W4, respectively. Each film was measured in triplicate. The losing ratio was determined using the Formula (2):
  L ( % ) = W 3 − W 4 W 3 × 100 %  

3.7. Mass Loss

The SS/agar films (3 cm × 3 cm) were soaked in 30 mL of PBS buffer (pH 7.4) at 37 °C after drying at 65 °C for 24 h. The initial mass of the film was weighed as W5. The PBS buffer was substituted daily to keep it fresh. At different intervals, the films were dried at 65 °C for 24 h after separation from the PBS buffer and were then weighed as W6. Each film was measured three times. The mass loss of each film was determined using the Formula (3):
  M ( % ) = W 5 − W 6 W 5 × 100 %  

3.8. Materials Characterization

The morphologies of the films were characterized by a JCM-5000 SEM (JEOL, Tokyo, Japan). The particle size (diameter) of about 1000 particles were measured from the SEM images using the Nano Measurer software. Meanwhile, the energy dispersive spectra (EDS) were recorded on an Oxford INCA X-Max 250 (High Wycombe, UK). XRD was measured on a PANalytical X’Pert X-ray diffractometer (Almelo, The Netherlands). 2θ was set from 10° to 80°. The FT-IR spectra were collected on a Thermofisher Nicolet iz10 spectrometer (Framingham, MA, USA). The wavenumber was from 4000 cm−1 to 800 cm−1 and the resolution was 2 cm−1.

3.9. Inhibition Zone Assay

The assay was carried out as previously described [63]. E. coli and S. aureus were cultured at 37 °C to have an optical density (OD) at 600 nm (OD600) of 0.2, and were then spread on agar plates to culture with circular sterile SS/agar or AgNPs/SS/agar films (d = 0.7 cm) at 37 °C. After 12 h, the diameters of the formed inhibition zones were measured to assess the antimicrobial activity of the films.

3.10. Growth Curve Assay

The assay was performed as Tao’s protocol [64]. Bacteria were cultured to have an initial OD600 of 0.2. Then, the circular sterile SS/agar or AgNPs/SS/agar films (d = 0.7 cm) were added to culture with the bacteria at 37 °C. Bacteria (0.2 mL) were collected to measure OD600 at different intervals. Each film was measured in triplicate.

3.11. Bacterial Colony Counting Assay

The SS/agar film was soaked in AgNO3 solution (50 mM) at 25 °C and was then exposed to UV irradiation for 30 min to synthesize AgNPs on the composite film. The prepared film was assessed against E. coli for its antibacterial activity. The SS/agar film in the AgNO3 solution without UV irradiation was used as a control. Bacteria were cultured to have an initial OD600 of 0.2. Then, the circular sterile film (d = 1 cm) was added to culture with E. coli at 37 °C. After 6 h, 100 μL of bacterial suspension was collected and was spread on a nutrient agar plate to culture at 37 °C. After 10 h, the bacterial colonies were counted to compare the antibacterial effect of Ag (I) ions and AgNPs on E. coli.

3.12. Statistics

For all of the experiments, at least three independent tests were performed, and the data were presented as mean ± SD. The experimental data were analyzed using Student’s t test and a linear generalized analysis of variance (ANOVA). For the t test, * p < 0.05; ** p < 0.01. For the ANOVA, different lowercase letters indicate a significant difference between the groups, and the same letter means that there is no significant difference between the groups (p < 0.05).

4. Conclusions

In this work, we blended sericin with agar to prepare a SS/agar film with an enhanced mechanical performance. Then, we synthesized AgNPs in situ on the surface of the SS/agar film with the assistance of UV irradiation. The AgNPs modified composite film exhibited excellent hydrophilicity, good mechanical properties, and antimicrobial capacity toward E. coli and S. aureus. This novel sericin-based composite film with its enhanced mechanical performance and antimicrobial capability could potentially be applied in wound dressing and tissue engineering.

Author Contributions

Y.W., R.C., G.T., and H.H. conceived and designed the experiments; R.C., G.T., and P.W. performed the experiments; Y.W., R.C., and G.T. analyzed the data; H.Z. and P.Z. contributed reagents/materials/analysis tools; R.C. and Y.W. wrote the draft; Y.W. and H.H. supervised the research; A.U. and H.H. revised the manuscript.

Funding

This work was funded by National Natural Science Foundation of China (31572465), the Chongqing Research Program of Basic Research and Frontier Technology (cstc2015jcyj BX0035, cstc2015jcyjA00040), the State Key Program of the National Natural Science of China (31530071), Fundamental Research Funds for the Central Universities (XDJK2018B010, XDJK2018C063), the Graduate Research and Innovation Project of Chongqing (CYB17069, CYS18123) and the Open Project Program of Chongqing Engineering and Technology Research Center for Novel Silk Materials (silkgczx2016003).

Conflicts of Interest

The authors declare no conflict of interest. The founding sponsors had no role in the design of the study, in the collection, analyses, or interpretation of the data, in the writing of the manuscript, and in the decision to publish the results.

References

  1. Jătariu Cadinoiu, A.N.; Popa, M.; Curteanu, S.; Peptu, C.A. Covalent and ionic co-cross-linking—An original way to prepare chitosan-gelatin hydrogels for biomedical applications. J. Biomed. Mater. Res. A 2011, 98, 342–350. [Google Scholar] [CrossRef] [PubMed]
  2. Zhang, Y.Q.; Tao, M.L.; Shen, W.D.; Zhou, Y.Z.; Ding, Y.; Ma, Y.; Zhou, W.L. Immobilization of l-asparaginase on the microparticles of the natural silk sericin protein and its characters. Biomaterials 2004, 25, 3751–3759. [Google Scholar] [CrossRef] [PubMed]
  3. Takasu, Y.; Yamada, H.; Tsubouchi, K. Isolation of three main sericin components from the cocoon of the silkworm, bombyx mori. Biosci. Biotechnol. Biochem. 2002, 66, 2715–2718. [Google Scholar] [CrossRef] [PubMed]
  4. Padamwar, M.N.; Pawar, A.P. Silk sericin and its applications: A review. J. Sci. Ind. Res. India 2004, 63, 323–329. [Google Scholar]
  5. Zhang, Y.Q. Applications of natural silk protein sericin in biomaterials. Biotechnol. Adv. 2002, 20, 91–100. [Google Scholar] [CrossRef]
  6. Zhaorigetu, S.; Yanaka, N.; Sasaki, M.; Watanabe, H.; Kato, N. Inhibitory effects of silk protein, sericin on UVB-induced acute damage and tumor promotion by reducing oxidative stress in the skin of hairless mouse. J. Photochem. Photobiol. B Biol. 2003, 71, 11–17. [Google Scholar] [CrossRef]
  7. Dash, B.C.; Mandal, B.B.; Kundu, S.C. Silk gland sericin protein membranes: Fabrication and characterization for potential biotechnological applications. J. Biotechnol. 2009, 144, 321–329. [Google Scholar] [CrossRef] [PubMed]
  8. Mandal, B.B.; Priya, A.S.; Kundu, S.C. Novel silk sericin/gelatin 3-D scaffolds and 2-D films: Fabrication and characterization for potential tissue engineering applications. Acta Biomater. 2009, 5, 3007–3020. [Google Scholar] [CrossRef] [PubMed]
  9. Siritientong, T.; Srichana, T.; Aramwit, P. The effect of sterilization methods on the physical properties of silk sericin scaffolds. AAPS PharmSciTech 2011, 12, 771–781. [Google Scholar] [CrossRef] [PubMed]
  10. Chlapanidas, T.; Faragò, S.; Lucconi, G.; Perteghella, S.; Galuzzi, M.; Mantelli, M.; Avanzini, M.A.; Tosca, M.C.; Marazzi, M.; Vigo, D. Sericins exhibit ROS-scavenging, anti-tyrosinase, anti-elastase, and in vitro immunomodulatory activities. Int. J. Biol. Macromol. 2013, 58, 47–56. [Google Scholar] [CrossRef] [PubMed]
  11. Bari, E.; Arciola, C.; Vigani, B.; Crivelli, B.; Moro, P.; Marrubini, G.; Sorrenti, M.; Catenacci, L.; Bruni, G.; Chlapanidas, T.; et al. In vitro effectiveness of microspheres based on silk sericin and chlorella vulgaris or arthrospira platensis for wound healing applications. Materials 2017, 10, 983. [Google Scholar] [CrossRef] [PubMed]
  12. Sasaki, M.; Kato, Y.; Yamada, H.; Terada, S. Development of a novel serum-free freezing medium for mammalian cells using the silk protein sericin. Biotechnol. Appl. Biochem. 2005, 42, 183–188. [Google Scholar] [PubMed]
  13. Tsubouchi, K.; Igarashi, Y.; Takasu, Y.; Yamada, H. Sericin enhances attachment of cultured human skin fibroblasts. Biosci. Biotechnol. Biochem. 2005, 69, 403–405. [Google Scholar] [CrossRef] [PubMed]
  14. Terada, S.; Nishimura, T.; Sasaki, M.; Yamada, H.; Miki, M. Sericin, a protein derived from silkworms, accelerates the proliferation of several mammalian cell lines including a hybridoma. Cytotechnology 2002, 40, 3–12. [Google Scholar] [CrossRef] [PubMed]
  15. Zhang, F.; Zhang, Z.B.; Zhu, X.L.; Kang, E.T.; Neoh, K.G. Silk-functionalized titanium surfaces for enhancing osteoblast functions and reducing bacterial adhesion. Biomaterials 2008, 29, 4751–4759. [Google Scholar] [CrossRef] [PubMed]
  16. Martinez-Mora, C.; Mrowiec, A.; Garcia-Vizcaino, E.M.; Alcaraz, A.; Cenis, J.L.; Nicolas, F.J. Fibroin and sericin from bombyx mori silk stimulate cell migration through upregulation and phosphorylation of c-jun. PLoS ONE 2012, 7, e42271. [Google Scholar] [CrossRef] [PubMed]
  17. Greaves, N.S.; Ashcroft, K.J.; Baguneid, M.; Bayat, A. Current understanding of molecular and cellular mechanisms in fibroplasia and angiogenesis during acute wound healing. J. Dermatol. Sci. 2013, 72, 206–217. [Google Scholar] [CrossRef] [PubMed]
  18. Aramwit, P.; Sangcakul, A. The effects of sericin cream on wound healing in rats. Biosci. Biotechnol. Biochem. 2007, 71, 2473–2477. [Google Scholar] [CrossRef] [PubMed]
  19. Aramwit, P.; Kanokpanont, S.; De-Eknamkul, W.; Srichana, T. Monitoring of inflammatory mediators induced by silk sericin. J. Biosci. Bioeng. 2009, 107, 556–561. [Google Scholar] [CrossRef] [PubMed]
  20. Crivelli, B.; Perteghella, S.; Bari, E.; Sorrenti, M.; Tripodo, G.; Chlapanidas, T.; Torre, M.L. Silk nanoparticles: From inert supports to bioactive natural carriers for drug delivery. Soft Matter 2018, 14, 546–557. [Google Scholar] [CrossRef] [PubMed]
  21. Chlapanidas, T.; Perteghella, S.; Leoni, F.; Faragò, S.; Marazzi, M.; Rossi, D.; Martino, E.; Gaggeri, R.; Collina, S. TNF-α blocker effect of naringenin-loaded sericin microparticles that are potentially useful in the treatment of psoriasis. Int. J. Mol. Sci. 2014, 15, 13624–13636. [Google Scholar] [CrossRef] [PubMed]
  22. Aramwit, P.; Palapinyo, S.; Srichana, T.; Chottanapund, S.; Muangman, P. Silk sericin ameliorates wound healing and its clinical efficacy in burn wounds. Arch. Dermatol. Res. 2013, 305, 585–594. [Google Scholar] [CrossRef] [PubMed]
  23. Dash, R.; Ghosh, S.K.; Kaplan, D.L.; Kundu, S.C. Purification and biochemical characterization of a 70 kda sericin from tropical tasar silkworm, Antheraea Mylitta. Comp. Biochem. Phys. B 2007, 147, 129–134. [Google Scholar] [CrossRef] [PubMed]
  24. Oh, H.; Lee, J.Y.; Kim, M.K.; Um, I.C.; Lee, K.H. Refining hot-water extracted silk sericin by ethanol-induced precipitation. Int. J. Biol. Macromol. 2011, 48, 32–37. [Google Scholar] [CrossRef] [PubMed]
  25. Nayak, S.; Talukdar, S.; Kundu, S.C. Potential of 2D crosslinked sericin membranes with improved biostability for skin tissue engineering. Cell Tissue Res. 2012, 347, 783–794. [Google Scholar] [CrossRef] [PubMed]
  26. Zhang, X.H.; Tsukada, M.; Morikawa, H.; Aojima, K.; Zhang, G.Y.; Miura, M. Production of silk sericin/silk fibroin blend nanofibers. Nanoscale Res. Lett. 2011, 6, 510. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  27. Phan, T.D.; Debeaufort, F.; Luu, D.; Voilley, A. Functional properties of edible agar-based and starch-based films for food quality preservation. J. Agric. Food Chem. 2005, 53, 973–981. [Google Scholar] [CrossRef] [PubMed]
  28. Wu, Y.; Geng, F.Y.; Chang, P.R.; Yu, J.G.; Ma, X.F. Effect of agar on the microstructure and performance of potato starch film. Carbohydr. Polym. 2009, 76, 299–304. [Google Scholar] [CrossRef]
  29. Li, H.Y.; Yu, X.J.; Jin, Y.; Zhang, W.; Liu, Y.L. Development of an eco-friendly agar extraction technique from the red seaweed gracilaria lemaneiformis. Bioresour. Technol. 2008, 99, 3301–3305. [Google Scholar] [CrossRef] [PubMed]
  30. Freile-Pelegrin, Y.; Madera-Santana, T.; Robledo, D.; Veleva, L.; Quintana, P.; Azamar, J.A. Degradation of agar films in a humid tropical climate: Thermal, mechanical morphological and structural changes. Polym. Degrad. Stab. 2007, 92, 244–252. [Google Scholar] [CrossRef]
  31. Lara, H.H.; Garza-Trevino, E.N.; Ixtepan-Turrent, L.; Singh, D.K. Silver nanoparticles are broad-spectrum bactericidal and virucidal compounds. J. Nanobiotechnol. 2011, 9, 30. [Google Scholar] [CrossRef] [PubMed]
  32. Tao, G.; Wang, Y.J.; Liu, L.N.; Chang, H.P.; Zhao, P.; He, H.W. Preparation and characterization of silver nanoparticles composited on polyelectrolyte film coated sericin gel for enhanced antibacterial application. Sci. Adv. Mater. 2016, 8, 1547–1552. [Google Scholar] [CrossRef]
  33. Tao, G.; Cai, R.; Wang, Y.J.; Song, K.; Guo, P.C.; Zhao, P.; Zuo, H.; He, H.W. Biosynthesis and characterization of AGNPS-silk/PVA film for potential packaging application. Materials 2017, 10, 667. [Google Scholar] [CrossRef] [PubMed]
  34. Cai, R.; Tao, G.; He, H.; Song, K.; Zuo, H.; Jiang, W.; Wang, Y. One-step synthesis of silver nanoparticles on polydopamine-coated sericin/polyvinyl alcohol composite films for potential antimicrobial applications. Molecules 2017, 22, 721. [Google Scholar] [CrossRef] [PubMed]
  35. Dorjnamjin, D.; Ariunaa, M.; Shim, Y.K. Synthesis of silver nanoparticles using hydroxyl functionalized ionic liquids and their antimicrobial activity. Int. J. Mol. Sci. 2008, 9, 807–819. [Google Scholar] [CrossRef] [PubMed]
  36. Morones, J.R.; Elechiguerra, J.L.; Camacho, A.; Holt, K.; Kouri, J.B.; Ramirez, J.T.; Yacaman, M.J. The bactericidal effect of silver nanoparticles. Nanotechnology 2005, 16, 2346–2353. [Google Scholar] [CrossRef] [PubMed]
  37. Skladanowski, M.; Golinska, P.; Rudnicka, K.; Dahm, H.; Rai, M. Evaluation of cytotoxicity, immune compatibility and antibacterial activity of biogenic silver nanoparticles. Med. Microbiol. Immunol. 2016, 205, 603–613. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  38. Elliott, C. The effects of silver dressings on chronic and burns wound healing. Br. J. Nurs. 2010, 19, S32–S36. [Google Scholar] [CrossRef] [PubMed]
  39. He, H.; Tao, G.; Wang, Y.; Cai, R.; Guo, P.; Chen, L.; Zuo, H.; Zhao, P.; Xia, Q. In situ green synthesis and characterization of sericin-silver nanoparticle composite with effective antibacterial activity and good biocompatibility. Mater. Sci. Eng. C 2017, 80, 509–516. [Google Scholar] [CrossRef] [PubMed]
  40. Swope, K.L.; Flicklinger, M.C. The use of confocal scanning laser microscopy and other tools to characterize Escherichia coli in a high-cell-density synthetic biofilm. Biotechnol. Bioeng. 1996, 52, 340–356. [Google Scholar] [CrossRef]
  41. Lee, J.M.; Yu, J.E.; Koh, Y.S. Experimental study on the effect of wavelength in the laser cleaning of silver threads. J. Cult. Herit. 2003, 4, 157s–161s. [Google Scholar] [CrossRef]
  42. Ma, Z.Y.; Jia, X.; Hu, J.M.; Liu, Z.Y.; Wang, H.Y.; Zhou, F. Mussel-inspired thermosensitive polydopamine-graft-poly(N-isopropylacrylamide) coating for controlled-release fertilizer. J. Agric. Food Chem. 2013, 61, 12232–12237. [Google Scholar] [CrossRef] [PubMed]
  43. Vahabi, K.; Mansoori, G.A.; Karimi, S. Biosynthesis of silver nanoparticles by fungus trichoderma reesei (a route for large-scale production of AGNPS). Insci. J. 2011, 1, 65–79. [Google Scholar] [CrossRef]
  44. Mohammadinejad, R.; Pourseyedi, S.; Baghizadeh, A.; Ranjbar, S.; Mansoori, G. Synthesis of silver nanoparticles using silybum marianum seed extract. Int. J. Nanosci. Nanotechnol. 2013, 9, 221–226. [Google Scholar]
  45. Fellahi, O.; Das, M.R.; Coffinier, Y.; Szunerits, S.; Hadjersi, T.; Maamache, M.; Boukherroub, R. Silicon nanowire arrays-induced graphene oxide reduction under UV irradiation. Nanoscale 2011, 3, 4662–4669. [Google Scholar] [CrossRef] [PubMed]
  46. Wang, X.; Gao, W.; Xu, S.; Xu, W. Luminescent fibers: In situ synthesis of silver nanoclusters on silk via ultraviolet light-induced reduction and their antibacterial activity. Chem. Eng. J. 2012, 210, 585–589. [Google Scholar] [CrossRef]
  47. Cui, X.; Li, C.M.; Bao, H.; Zheng, X.; Lu, Z. In situ fabrication of silver nanoarrays in hyaluronan/PDDA layer-by-layer assembled structure. J. Colloid Interface Sci. 2008, 327, 459–465. [Google Scholar] [CrossRef] [PubMed]
  48. Bahrami, S.B.; Kordestani, S.S.; Mirzadeh, H.; Mansoori, P. Poly(vinyl alcohol)—Chitosan blends: Preparation, mechanical and physical properties. Iran. Polym. J. 2003, 12, 139–146. [Google Scholar]
  49. Cervera, M.F.; Heinamaki, J.; Krogars, K.; Jorgensen, A.C.; Karjalainen, M.; Colarte, A.I.; Yliruusi, J. Solid-state and mechanical properties of aqueous chitosan-amylose starch films plasticized with polyols. AAPS PharmSciTech 2004, 5, 109. [Google Scholar]
  50. Xu, F.; Wen, T.J.; Lu, T.J.; Seffen, K.A. Skin biothermomechanics for medical treatments. J. Mech. Behav. Biomed. 2008, 1, 172–187. [Google Scholar] [CrossRef] [PubMed]
  51. Tao, G.; Liu, L.N.; Wang, Y.J.; Chang, H.P.; Zhao, P.; Zuo, H.; He, H.W. Characterization of silver nanoparticle in situ synthesis on porous sericin gel for antibacterial application. J. Nanomater. 2016. [Google Scholar] [CrossRef]
  52. Abbasi, A.R.; Morsali, A. Synthesis and properties of silk yarn containing Ag nanoparticles under ultrasound irradiation. Ultrason. Sonochem. 2011, 18, 282–287. [Google Scholar] [CrossRef] [PubMed]
  53. Feng, J.J.; Zhang, P.P.; Wang, A.J.; Liao, Q.C.; Xi, J.L.; Chen, J.R. One-step synthesis of monodisperse polydopamine-coated silver core-shell nanostructures for enhanced photocatalysis. New J. Chem. 2012, 36, 148–154. [Google Scholar] [CrossRef]
  54. Zhang, X.M.; Wyeth, P. Using FTIR spectroscopy to detect sericin on historic silk. Sci. China Chem. 2010, 53, 626–631. [Google Scholar] [CrossRef]
  55. Ling, S.J.; Qi, Z.M.; Knight, D.P.; Shao, Z.Z.; Chen, X. Synchrotron FTIR microspectroscopy of single natural silk fibers. Biomacromolecules 2011, 12, 3344–3349. [Google Scholar] [CrossRef] [PubMed]
  56. Maity, K.; Panda, D.K.; Lochner, E.; Saha, S. Fluoride-induced reduction of Ag(i) cation leading to formation of silver mirrors and luminescent Ag-nanoparticles. J. Am. Chem. Soc. 2015, 137, 2812–2815. [Google Scholar] [CrossRef] [PubMed]
  57. Liao, Y.A.; Wang, Y.Q.; Feng, X.X.; Wang, W.C.; Xu, F.J.; Zhang, L.Q. Antibacterial surfaces through dopamine functionalization and silver nanoparticle immobilization. Mater. Chem. Phys. 2010, 121, 534–540. [Google Scholar] [CrossRef]
  58. Wu, J.H.; Wang, Z.; Xu, S.Y. Preparation and characterization of sericin powder extracted from silk industry wastewater. Food Chem. 2007, 103, 1255–1262. [Google Scholar] [CrossRef]
  59. Cai, R.; Tao, G.; He, H.; Guo, P.; Yang, M.; Ding, C.; Zuo, H.; Wang, L.; Zhao, P.; Wang, Y. In situ synthesis of silver nanoparticles on the polyelectrolyte-coated sericin/PVA film for enhanced antibacterial application. Materials 2017, 10, 967. [Google Scholar] [CrossRef] [PubMed]
  60. He, H.; Cai, R.; Wang, Y.; Tao, G.; Guo, P.; Zuo, H.; Chen, L.; Liu, X.; Zhao, P.; Xia, Q. Preparation and characterization of silk sericin/PVA blend film with silver nanoparticles for potential antimicrobial application. Int. J. Biol. Macromol. 2017, 104, 457–464. [Google Scholar] [CrossRef] [PubMed]
  61. Guan, J.; Porter, D.; Vollrath, F. Thermally induced changes in dynamic mechanical properties of native silks. Biomacromolecules 2013, 14, 930–937. [Google Scholar] [CrossRef] [PubMed]
  62. Vazquez, B.; Roman, J.S.; Peniche, C.; Cohen, M.E. Polymeric hydrophilic hydrogels with flexible hydrophobic chains. Control of the hydration and interactions with water molecules. Macromolecules 1997, 30, 8440–8446. [Google Scholar] [CrossRef]
  63. Schillinger, U.; Lucke, F.K. Antibacterial activity of lactobacillus-sake isolated from meat. Appl. Environ. Microbiol. 1989, 55, 1901–1906. [Google Scholar] [PubMed]
  64. Pal, S.; Tak, Y.K.; Song, J.M. Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the gram-negative bacterium Escherichia coli. Appl. Environ. Microbiol. 2007, 73, 1712–1720. [Google Scholar] [CrossRef] [PubMed]
Sample Availability: Samples of sericin are available from the authors.
Molecules 23 01821 g001 550
Figure 1. A diagram of the fabrication and antimicrobial test of the AgNPs/SS/agar film.
Figure 1. A diagram of the fabrication and antimicrobial test of the AgNPs/SS/agar film.
Molecules 23 01821 g001
Molecules 23 01821 g002 550
Figure 2. Mechanical properties of the SS/agar films with different ratios (SS: agar = 3:1, 2:1, 1:1, 0:1). The stress of the SS/agar film in a dry state (a) and wet state (c); The strain of the SS/agar film in a dry state (b) and wet state (d). For statistical analysis, the bars that are labeled with different lowercase letters (a, b, c) are significantly different, and the same letter indicates no significant difference (p < 0.05).
Figure 2. Mechanical properties of the SS/agar films with different ratios (SS: agar = 3:1, 2:1, 1:1, 0:1). The stress of the SS/agar film in a dry state (a) and wet state (c); The strain of the SS/agar film in a dry state (b) and wet state (d). For statistical analysis, the bars that are labeled with different lowercase letters (a, b, c) are significantly different, and the same letter indicates no significant difference (p < 0.05).
Molecules 23 01821 g002
Molecules 23 01821 g003 550
Figure 3. The water contact angle of the SS/agar films. SS: agar = 0:1 (a), SS: agar = 1:1 (b), SS: agar = 2:1 (c), and SS: agar = 3:1 (d).
Figure 3. The water contact angle of the SS/agar films. SS: agar = 0:1 (a), SS: agar = 1:1 (b), SS: agar = 2:1 (c), and SS: agar = 3:1 (d).
Molecules 23 01821 g003
Molecules 23 01821 g004 550
Figure 4. The swelling (a) and losing ratio (b) of the different SS/agar films. * indicates p < 0.05.
Figure 4. The swelling (a) and losing ratio (b) of the different SS/agar films. * indicates p < 0.05.
Molecules 23 01821 g004
Molecules 23 01821 g005 550
Figure 5. The mass loss of the SS/agar films.
Figure 5. The mass loss of the SS/agar films.
Molecules 23 01821 g005
Molecules 23 01821 g006 550
Figure 6. The surface morphology of the different films. The SS/agar film (a,b) and AgNPs/SS/agar films after UV irradiation for 10 min (c,d), 30 min (e,f), and 60 min (g,h), respectively; inset in (d,f,h): the size distribution of the AgNPs. (i) Elemental composition analysis of the AgNPs/SS/agar film by EDS.
Figure 6. The surface morphology of the different films. The SS/agar film (a,b) and AgNPs/SS/agar films after UV irradiation for 10 min (c,d), 30 min (e,f), and 60 min (g,h), respectively; inset in (d,f,h): the size distribution of the AgNPs. (i) Elemental composition analysis of the AgNPs/SS/agar film by EDS.
Molecules 23 01821 g006
Molecules 23 01821 g007 550
Figure 7. The characterization of different films. (a) XRD spectra; (b) FT-IR spectra.
Figure 7. The characterization of different films. (a) XRD spectra; (b) FT-IR spectra.
Molecules 23 01821 g007
Molecules 23 01821 g008 550
Figure 8. XPS spectra of the AgNPs/SS/agar film (a) and the deconvolution of the Ag (3d) peak (b).
Figure 8. XPS spectra of the AgNPs/SS/agar film (a) and the deconvolution of the Ag (3d) peak (b).
Molecules 23 01821 g008
Molecules 23 01821 g009 550
Figure 9. The inhibition zone assay of the SS/agar and AgNPs/SS/agar films. (a) E. coli and (b) S. aureus.
Figure 9. The inhibition zone assay of the SS/agar and AgNPs/SS/agar films. (a) E. coli and (b) S. aureus.
Molecules 23 01821 g009
Molecules 23 01821 g010 550
Figure 10. Bacterial growth assay. (a) E. coli and (b) S. aureus. a1, b1, control; a2, b2, SS/agar film; a3–b5, AgNPs/SS/agar films with UV irradiation for 10 min (a3, b3), 30 min (a4, b4), and 60 min (a5, b5).
Figure 10. Bacterial growth assay. (a) E. coli and (b) S. aureus. a1, b1, control; a2, b2, SS/agar film; a3–b5, AgNPs/SS/agar films with UV irradiation for 10 min (a3, b3), 30 min (a4, b4), and 60 min (a5, b5).
Molecules 23 01821 g010
Molecules 23 01821 g011 550
Figure 11. A comparison of the bacterial colony numbers that were treated by the AgNO3/SS/agar film (a) and the AgNPs/SS/ agar film (b).
Figure 11. A comparison of the bacterial colony numbers that were treated by the AgNO3/SS/agar film (a) and the AgNPs/SS/ agar film (b).
Molecules 23 01821 g011
Table
Table 1. The diameters of the formed inhibition rings by the AgNPs/SS/agar films with different UV irradiation times.
Table 1. The diameters of the formed inhibition rings by the AgNPs/SS/agar films with different UV irradiation times.
SS/Agar (cm)UV 10 min (cm)UV 30 min (cm)UV 60 min (cm)
E. coilNA1.67 ± 0.04 a1.69 ± 0.02 a1.74 ± 0.05 a
S. aureusNA1.70 ± 0.21 a1.81 ± 0.04 b2.21 ± 0.04 c
NA, no inhibition ring. The superscript a, b, and c indicate that the data between the groups are statistically different. The superscript with the same letter indicates no statistical difference between the groups. p < 0.05.

Share and Cite

MDPI and ACS Style

Wang, Y.; Cai, R.; Tao, G.; Wang, P.; Zuo, H.; Zhao, P.; Umar, A.; He, H. A Novel AgNPs/Sericin/Agar Film with Enhanced Mechanical Property and Antibacterial Capability. Molecules 2018, 23, 1821. https://doi.org/10.3390/molecules23071821

AMA Style

Wang Y, Cai R, Tao G, Wang P, Zuo H, Zhao P, Umar A, He H. A Novel AgNPs/Sericin/Agar Film with Enhanced Mechanical Property and Antibacterial Capability. Molecules. 2018; 23(7):1821. https://doi.org/10.3390/molecules23071821

Chicago/Turabian Style

Wang, Yejing, Rui Cai, Gang Tao, Peng Wang, Hua Zuo, Ping Zhao, Ahmad Umar, and Huawei He. 2018. "A Novel AgNPs/Sericin/Agar Film with Enhanced Mechanical Property and Antibacterial Capability" Molecules 23, no. 7: 1821. https://doi.org/10.3390/molecules23071821

APA Style

Wang, Y., Cai, R., Tao, G., Wang, P., Zuo, H., Zhao, P., Umar, A., & He, H. (2018). A Novel AgNPs/Sericin/Agar Film with Enhanced Mechanical Property and Antibacterial Capability. Molecules, 23(7), 1821. https://doi.org/10.3390/molecules23071821

Article Metrics

Back to TopTop