Next Article in Journal
Assessing the Quality of Burkina Faso Soybeans Based on Fatty Acid Composition and Pesticide Residue Contamination
Next Article in Special Issue
Viscoelastic Properties of Water-Absorbed Poly(methyl methacrylate) Doped with Lithium Salts with Various Anions
Previous Article in Journal
Shionone-Targeted Pneumolysin to Ameliorate Acute Lung Injury Induced by Streptococcus pneumoniae In Vivo and In Vitro
Previous Article in Special Issue
A Fluorescent Linear Conjugated Polymer Constructed from Pillararene and Anthracene
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A Water-Soluble Leggero Pillar[5]arene

International Joint Research Laboratory of Nano-Micro Architecture Chemistry, College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012, China
*
Authors to whom correspondence should be addressed.
These authors contributed equally to this work.
Molecules 2022, 27(19), 6259; https://doi.org/10.3390/molecules27196259
Submission received: 6 September 2022 / Revised: 19 September 2022 / Accepted: 20 September 2022 / Published: 23 September 2022

Abstract

:
The study of aqueous-phase molecular recognition of artificial receptors is one of the frontiers in supramolecular chemistry since most biochemical processes and reactions take place in an aqueous medium and heavily rely on it. In this work, a water-soluble version of leggero pillar[5]arene bearing eight positively charged pyridinium moieties (CWP[5]L) was designed and synthesized, which exhibited good binding affinities with certain aliphatic sulfonate species in aqueous solutions. Significantly, control experiments demonstrate that the guest binding performance of CWP[5]L is superior to its counterpart water-soluble macrocyclic receptor in traditional pillararenes.

1. Introduction

Synthetic macrocycles have been serving as the primary tools in host-guest chemistry since their birth owing to their intrinsic functional characteristics and capabilities of molecular recognition and self-assembly [1,2,3]. Modern supramolecular chemistry has also significantly benefited from the development of novel macrocyclic receptors with preorganized cavity structures and intriguing host–guest properties [4]. For example, pillar[n]arenes (pillararenes), a family of influential synthetic macrocycles first introduced by Ogoshi et al. in 2008 [5,6], have experienced rapid development during the past years and created a boom in many cross-disciplinary research fields, including but not limited to molecular devices and machines [7], stimuli-responsive supramolecular/host–guest systems [8,9,10,11,12,13,14], porous/nonporous materials [15,16,17], organic–inorganic hybrid systems [18,19,20,21], catalysis [22,23,24] and cancer theranostics [25,26,27].
Inspired by pillararenes, many novel macrocyclic entities such as asar[n]arenes [28], hybrid[n]arenes [29], biphenyl-extended pillar[6]arene [30,31,32,33], tiara[5]arene [34], bowtiearene [35], leaning pillar[6]arene [36,37], geminiarenes [38,39], pagoda[4]arene [40] and biphenarenes [41] have been designed and synthesized in rapid succession, promoting the prosperity of modern synthetic macrocyclic chemistry and creating unlimited possibilities for supramolecular chemistry and materials. Very recently, we presented a new version of pillararene-derived macrocyclic arenes named leggero pillar[n]arenes [42,43], in which two substituents on a single one of the units of traditional pillararenes were selectively removed to expand their structural flexibility and cavity adaptability.
Since most biochemical reactions take place in water, the investigation of molecular recognition in aqueous phases is of greater research value than in organic phases. In the past few years, cationic water-soluble macrocyclic receptors have received tremendous attention in supramolecular community due to their great potential in complexing with important organic anionic species, and many valuable applications such as antibiotics [44], metabolism regulation [45], selective precipitation [33], self-assembly [46] and supra-amphiphiles [47] have been explored on the basis of this feature. Thus, synthesis of novel cationic water-soluble macrocyclic receptors and investigating their host–guest properties in aqueous phase are highly significant and worth exploring.
In this work, the first cationic water-soluble version of the leggero pillar[5]arene (i.e., CWP[5]L) is designed and successfully synthesized. Four aliphatic sulfonate guests with different chain lengths (G1G4) are selected to investigate the recognition properties of CWP[5]L in aqueous media (Scheme 1). Control experiments employing its counterpart macrocyclic derivative CWP[5]A from traditional pillararenes confirm that CWP[5]L has better binding performance owing to its superior structural flexibility.

2. Results

As shown in Scheme 1, CWP[5]L and CWP[5]A bearing eight and ten cationic pyridinium moieties could be quantitatively prepared through a SN2 nucleophilic substitution by reacting their corresponding perbromoethylated macrocyclic derivatives BrP[5]L and BrP[5]A with pyridine (also as solvent), respectively, and the target receptors were fully characterized by 1H/13C NMR and high-resolution mass spectroscopy (HRMS) (Figures S1–S6).
The binding behaviors of CWP[5]L with G1G4 were first investigated by 1H NMR spectroscopy. As shown in Figure 1a, when we mixed CWP[5]L (4.0 mM) and 1.0 equiv. of G1 in D2O, the 1H NMR spectrum displayed only one set of resonance signals distinct from those of the single component host and guest, indicating that the binding complex was formed, and the complexation between CWP[5]L and G1 was a fast exchange process on the NMR timescale. Compared with the free guest, protons Ha-Hc of G1 showed remarkable upfield shifts and broadening effects as a result of the inclusion-induced shielding effects, while protons Hd on the terminal methyl showed downfield shifts due to the deshielding effect. These changes indicated that G1 was threaded into the host cavity, forming an interpenetrated inclusion complex. On the other hand, the host was deshielded by the included guest, and the proton signals of CWP[5]L derived from the pyridinium moieties (H1) and substituted phenylene subunits (H2 and H3) exhibited downfield displacement.
The host-guest binding behavior between CWP[5]L and G1 was also investigated by 2D ROESY analysis. As shown in Figure 1b, the correlation signals between the alkyl chain protons (Hc) of G1 and the phenylene and pyridinium protons (H1 and H2) of CWP[5]L were clearly observed, further confirming the interpenetrated geometry. Besides, similar complexation-induced shielding/deshielding effects were also observed in the mixtures of CWP[5]L and other selected sulfonate guests (G2G4), respectively, indicating that these host-guest assemblies have a similar binding mode, i.e., the macrocyclic cavity of CWP[5]L is threaded by the alkyl chain of the guests. Interestingly, it should be noted that with the decrease in the alkyl chain length from G1 to G4, the resonance signals for the terminal methyl protons (Hd) experienced a shift from downfield (G1 and G2) to upfield (G3 and G4) upon mixing with CWP[5]L (Figure 1a and Figures S7–S9), suggesting that the terminal groups of G1 and G2 are protruded out of the macrocyclic cavity and the corresponding inclusion complexes could also be considered as [2]pseudorotaxane structures, respectively (Figure 2).
To quantitatively estimate the interactions between CWP[5]L and the sulfonate guests, 1H NMR titration experiments were further implemented to afford the association constants (Ka) for the host-guest inclusion complexation in D2O (Figures S10–S13). As shown in Figure 3a–d, CWP[5]L has good binding affinities towards all the guests, and the Ka values for 1:1 complexation with G1G4 were determined to be 50,500, 34,300, 11,600 and 9330 M−1, respectively. Interestingly, a marked increase in the Ka values was observed in the order of G4 < G3 < G2 < G1, which could be attributed to the enhanced hydrophobic interaction and the guests’ increasing chain length.
Given that CWP[5]L exhibited strong binding affinities with linear sulfonate guests, we were curious to find some differences in the binding performance between CWP[5]L and its counterpart water-soluble macrocyclic derivative CWP[5]A from traditional pillararenes. Subsequently, controlled 1H NMR titration experiments by using CWP[5]A were carried out (Figures S14–S17), and the Ka values for G1G4 were determined to be 39,500, 9760, 6210 and 5900 M−1, respectively (Figure 3e–h). Analogously, the Ka values increase in the order of G4 < G3 < G2 < G1, again confirming the pivotal role of hydrophobic interaction in modulating the host-guest inclusion complexation in the aqueous phase. Significantly, the binding constants of CWP[5]L are larger than those of its counterpart CWP[5]A, indicating that the de-functionalized and free-rotation phenylene units invest CWP[5]L with more superior cavity adaptability and relatively low in-cavity electron density for binding anionic species.

3. Materials and Methods

3.1. General Information

Starting reagents and solvents were commercially available and used without further purification unless stated otherwise. 1H NMR and 13C NMR spectra were recorded on a Bruker AVANCE III 400 MHz instrument at room temperature. The 2D ROESY NMR spectra were recorded on a Bruker AVANCE III 600 MHz instrument. Mass spectra were recorded on a Bruker Agilent1290-micrOTOF Q II High-resolution (HR) mass spectrometry instrument.

3.2. Synthetic Procedures

Perbromoethylated macrocyclic derivatives BrP[5]L and BrP[5]A were synthesized according to the previous literature reports [21,43].

3.2.1. Synthesis of CWP[5]L

A pyridine (3 mL) solution of BrP[5]L (0.6 g, 0.4 mmol) was heated at 100 °C for 10 h. Then, the resulting precipitate was filtered and washed with CH2Cl2 to afford the target compound as a light yellow solid (0.82 g, 95%).
1H NMR (600 MHz, 298 K, D2O, δ ppm): δ 8.88 (dd, J = 5.2, 3.5 Hz, 8H), 8.63–8.52 (m, 6H), 8.47–8.35 (m, 6H), 8.17 (t, J = 7.9 Hz, 2H), 8.01 (dt, J = 40.1, 7.2 Hz, 10H), 7.71 (dt, J = 95.8, 7.2 Hz, 8H), 6.77–6.61 (m, 10H), 6.06 (s, 2H), 5.05–4.87 (m, 13H), 4.57–4.52 (m, 4H), 4.50–4.44 (m, 8H), 4.42–4.37 (m, 4H), 3.91 (s, 3H), 3.59 (d, J = 22.0 Hz, 6H), 3.44 (s, 4H); 13C NMR (101 MHz, 298 K, D2O, δ ppm): δ 149.40, 146.35, 146.16, 145.74, 144.81, 144.68, 144.46, 128.30, 128.23, 128.12, 127.70, 116.25, 115.36, 67.44, 66.80, 61.00, 60.90, 34.52, 28.88; HRMS (ESI): [C91H93N8O8Br5]3+ calcd. [M] m/z: 607.1032, found m/z: 607.1082.

3.2.2. Synthesis of CWP[5]A

A pyridine (3 mL) solution of BrP[5]A (0.6 g, 0.35 mmol) was heated at 100 °C for 10 h. Then, the resulting precipitate was filtered and washed with CH2Cl2 to afford the target compound as a light yellow solid (0.84 g, 96%).
1H NMR (400 MHz, 298 K, D2O, δ ppm): δ 8.69 (d, J = 5.8 Hz, 20H), 8.26 (t, J = 7.8 Hz, 10H), 7.84 (t, J = 7.0 Hz, 20H), 6.48 (s, 10H), 4.88 (s, 20H), 4.42 (s, 20H), 3.37 (s, 10H); 13C NMR (101 MHz, 298 K, D2O, δ ppm): δ 149.08, 146.08, 144.64, 128.94, 128.05, 115.77, 67.14, 60.82, 29.26; HRMS (ESI): [C105H110N10O10Br6]4+ calcd. [M] m/z: 537.8703, found m/z: 537.8414.

3.3. Determination of Association Constants

To determine the association constant, 1H NMR titrations using a nonlinear least-squares curve-fitting method were performed at 298 K in D2O. The association constants (Ka) were obtained for each host-guest combination from the following equation [48]:
Δδ = (Δδ/[G]0) (0.5[H]0 + 0.5([G]0 + 1/Ka) − (0.5([H]02 + (2[H]0(1/Ka − [G]0)) + (1/Ka + [G]0)2)0.5))
where [H]0 is the varying concentrations of host, Δδ is the chemical shift change of specific proton (Ha) on the guest at [H]0, Δδ is the chemical shift change of Ha when the guest is completely complexed, [G]0 is the fixed initial concentration of the guest. Assuming 1: 1 binding mode between the macrocyclic hosts (CWP[5]L and CWP[5]A) and sulfonate guests G1G4, the plot of Δδ as a function of [H]0 for each investigated host-guest pair gave a good fit, confirming the validity of the 1:1 complexation stoichiometry assumed.

4. Conclusions

In conclusion, we successfully synthesized the first water-soluble derivative of leggero pillar[5]arene (i.e., CWP[5]L), where the presence of eight cationic pyridinium moieties makes it a highly effective receptor for anionic sulfonate species in aqueous solutions. NMR experiments demonstrated that all the guests could be encapsulated into the cavity of CWP[5]L to form 1:1 host-guest complexes with interpenetrated geometry, and the binding affinities could be remarkably enhanced by increasing the alkyl chain length of the guests due to the growing hydrophobic interaction. More importantly, controlled experiments employing its counterpart water-soluble macrocyclic receptor derived from traditional pillararenes confirmed that CWP[5]L had better binding performance because of its superior structural flexibility and cavity adaptability originating from the free-rotation phenylene subunit. Above all, given the superior binding performance toward anionic species in water, we firmly believe that CWP[5]L will find far-ranging applications in, for example, molecular recognition, environmental remediation, biomedicine, material science and other related fields.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/molecules27196259/s1, Figures S1–S6: Characterization of CWP[5]L and CWP[5]A; Figures S7–S17: Host-guest binding studies by 1H NMR spectra.

Author Contributions

Conceptualization, J.-R.W. and Y.-W.Y.; Methodology, J.-R.W., G.W. and Z.C.; Investigation, J.-R.W., G.W. and Z.C.; Validation, J.-R.W., D.L., M.-H.L. and Y.W.; Supervision, Y.W. and Y.-W.Y.; Writing (original draft), J.-R.W., G.W., D.L. and M.-H.L.; Writing, (review and editing), Y.-W.Y. All authors have read and agreed to the published version of the manuscript.

Funding

This work was supported by the National Natural Science Foundation of China (grant nos. 52173200 and 21871108) and the China Postdoctoral Science Foundation (grant no. BX2021112).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Acknowledgments

We thank Chunyu Wang for his help with the 2D NMR experiments.

Conflicts of Interest

The authors declare no conflict of interest.

Sample Availability

Samples of the compounds are available from the authors.

References

  1. Pedersen, C.J. Cyclic polyethers and their complexes with metal salts. J. Am. Chem. Soc. 1967, 89, 7017–7036. [Google Scholar] [CrossRef]
  2. Pedersen, C.J. Cyclic polyethers and their complexes with metal salts. J. Am. Chem. Soc. 1967, 89, 2495–2496. [Google Scholar] [CrossRef]
  3. Liu, Z.; Nalluri, S.K.M.; Stoddart, J.F. Surveying macrocyclic chemistry: From flexible crown ethers to rigid cyclophanes. Chem. Soc. Rev. 2017, 46, 2459–2478. [Google Scholar] [CrossRef] [PubMed]
  4. Wu, J.-R.; Yang, Y.-W. New opportunities in synthetic macrocyclic arenes. Chem. Commun. 2019, 55, 1533–1543. [Google Scholar] [CrossRef] [PubMed]
  5. Ogoshi, T.; Kanai, S.; Fujinami, S.; Yamagishi, T.-A.; Nakamoto, Y. para-Bridged symmetrical pillar[5]arenes: Their Lewis acid catalyzed synthesis and host–guest property. J. Am. Chem. Soc. 2008, 130, 5022–5023. [Google Scholar] [CrossRef] [PubMed]
  6. Ogoshi, T.; Yamagishi, T.-A.; Nakamoto, Y. Pillar-shaped macrocyclic hosts Pillar[n]arenes: New Key Players for Supramolecular Chemistry. Chem. Rev. 2016, 116, 7937–8002. [Google Scholar] [CrossRef] [PubMed]
  7. Kato, K.; Fa, S.; Ohtani, S.; Shi, T.-h.; Brouwer, A.M.; Ogoshi, T. Noncovalently bound and mechanically interlocked systems using pillar[n]arenes. Chem. Soc. Rev. 2022, 51, 3648–3687. [Google Scholar] [CrossRef]
  8. Qu, D.-H.; Wang, Q.-C.; Zhang, Q.-W.; Ma, X.; Tian, H. Photoresponsive host–guest functional systems. Chem. Rev. 2015, 115, 7543–7588. [Google Scholar] [CrossRef]
  9. Yu, G.; Jie, K.; Huang, F. Supramolecular amphiphiles based on host–guest molecular recognition motifs. Chem. Rev. 2015, 115, 7240–7303. [Google Scholar] [CrossRef]
  10. Kakuta, T.; Yamagishi, T.-A.; Ogoshi, T. Stimuli-responsive supramolecular assemblies constructed from pillar[n]arenes. Acc. Chem. Res. 2018, 51, 1656–1666. [Google Scholar] [CrossRef]
  11. Wang, D.H.; Wang, J.; Wang, Y.; Yang, Y.W. A fluorescent linear conjugated polymer constructed from pillararene and anthracene. Molecules 2022, 27, 3162. [Google Scholar] [CrossRef]
  12. Zhao, M.; Li, C.J.; Shan, X.T.; Han, H.J.; Zhao, Q.H.; Xie, M.R.; Chen, J.Z.; Liao, X.J. A stretchable pillararene-containing supramolecular polymeric material with self-healing property. Molecules 2021, 26, 2191. [Google Scholar] [CrossRef]
  13. Lou, X.Y.; Song, N.; Yang, Y.W. Fluorescence resonance energy transfer systems in supramolecular macrocyclic chemistry. Molecules 2017, 22, 1640. [Google Scholar] [CrossRef]
  14. Lou, X.-Y.; Yang, Y.-W. Aggregation-induced emission systems involving supramolecular assembly. Aggregate 2020, 1, 19–30. [Google Scholar] [CrossRef]
  15. Li, M.-H.; Lou, X.-Y.; Yang, Y.-W. Pillararene-based molecular-scale porous materials. Chem. Commun. 2021, 57, 13429–13447. [Google Scholar] [CrossRef]
  16. Jie, K.; Zhou, Y.; Li, E.; Huang, F. Nonporous adaptive crystals of pillararenes. Acc. Chem. Res. 2018, 51, 2064–2072. [Google Scholar] [CrossRef]
  17. Wu, J.-R.; Yang, Y.-W. Synthetic macrocycle-based nonporous adaptive crystals for molecular separation. Angew. Chem. Int. Ed. 2021, 60, 1690–1701. [Google Scholar] [CrossRef]
  18. Lou, X.-Y.; Yang, Y.-W. Pillar[n]arene-based supramolecular switches in solution and on surfaces. Adv. Mater. 2020, 32, 2003263. [Google Scholar] [CrossRef]
  19. Song, N.; Kakuta, T.; Yamagishi, T.-A.; Yang, Y.-W.; Ogoshi, T. Molecular-scale porous materials based on pillar[n]arenes. Chem 2018, 4, 2029–2053. [Google Scholar] [CrossRef]
  20. Li, Z.; Yang, Y.-W. Functional materials with pillarene Struts. Acc. Mater. Res. 2021, 2, 292–305. [Google Scholar] [CrossRef]
  21. Yao, Y.; Xue, M.; Chi, X.; Ma, Y.; He, J.; Abliz, Z.; Huang, F. A new water-soluble pillar[5]arene: Synthesis and application in the preparation of gold nanoparticles. Chem. Commun. 2012, 48, 6505–6507. [Google Scholar] [CrossRef]
  22. Li, M.-H.; Yang, Z.; Li, Z.; Wu, J.-R.; Yang, B.; Yang, Y.-W. Construction of hydrazone-linked macrocycle-enriched covalent organic frameworks for highly efficient photocatalysis. Chem. Mater. 2022, 34, 5726–5739. [Google Scholar] [CrossRef]
  23. Li, Z.; Li, X.; Yang, Y.-W. Conjugated macrocycle polymer nanoparticles with alternating pillarenes and porphyrins as struts and cyclic nodes. Small 2019, 15, 1805509. [Google Scholar] [CrossRef]
  24. Li, Z.; Li, L.; Wang, Y.; Yang, Y.-W. Pillararene-enriched linear conjugated polymer materials with thiazolo[5,4-d]thiazole linkages for photocatalysis. Chem. Commun. 2021, 57, 6546–6549. [Google Scholar] [CrossRef]
  25. Song, N.; Lou, X.-Y.; Ma, L.; Gao, H.; Yang, Y.-W. Supramolecular nanotheranostics based on pillarenes. Theranostics 2019, 9, 3075–3093. [Google Scholar] [CrossRef]
  26. Song, N.; Zhang, Z.; Liu, P.; Dai, D.; Chen, C.; Li, Y.; Wang, L.; Han, T.; Yang, Y.-W.; Wang, D.; et al. Pillar[5]arene-modified gold nanorods as nanocarriers for multi-modal imaging-guided synergistic photodynamic-photothermal therapy. Adv. Funct. Mater. 2021, 31, 2009924. [Google Scholar] [CrossRef]
  27. Li, Z.; Song, N.; Yang, Y.-W. Stimuli-responsive drug delivery systems based on supramolecular nanovalves. Matter 2019, 1, 345–368. [Google Scholar] [CrossRef]
  28. Schneebeli, S.T.; Cheng, C.; Hartlieb, K.J.; Strutt, N.L.; Sarjeant, A.A.; Stern, C.L.; Stoddart, J.F. Asararenes—A family of large aromatic macrocycles. Chem. Eur. J. 2013, 19, 3860–3868. [Google Scholar] [CrossRef]
  29. Boinski, T.; Cieszkowski, A.; Rosa, B.; Szumna, A. Hybrid[n]arenes through thermodynamically driven macrocyclization reactions. J. Org. Chem. 2015, 80, 3488–3495. [Google Scholar] [CrossRef]
  30. Gao, B.; Tan, L.-L.; Song, N.; Li, K.; Yang, Y.-W. A high-yield synthesis of [m]biphenyl-extended pillar[n]arenes for an efficient selective inclusion of toluene and m-xylene in the solid state. Chem. Commun. 2016, 52, 5804–5807. [Google Scholar] [CrossRef]
  31. Dai, D.; Li, Z.; Yang, J.; Wang, C.; Wu, J.-R.; Wang, Y.; Zhang, D.; Yang, Y.-W. Supramolecular assembly-induced emission enhancement for efficient mercury(II) detection and removal. J. Am. Chem. Soc. 2019, 141, 4756–4763. [Google Scholar] [CrossRef] [PubMed]
  32. Dai, D.; Yang, J.; Zou, Y.-C.; Wu, J.-R.; Tan, L.-L.; Wang, Y.; Li, B.; Lu, T.; Wang, B.; Yang, Y.-W. Macrocyclic arenes-based conjugated macrocycle polymers for highly selective CO2 capture and iodine adsorption. Angew. Chem. Int. Ed. 2021, 60, 8967–8975. [Google Scholar] [CrossRef] [PubMed]
  33. Wu, J.-R.; Wang, C.-Y.; Tao, Y.-C.; Wang, Y.; Li, C.; Yang, Y.-W. A Water-soluble [2]biphenyl-extended pillar[6]arene. Eur. J. Org. Chem. 2018, 2018, 1321–1325. [Google Scholar] [CrossRef]
  34. Yang, W.; Samanta, K.; Wan, X.; Thikekar, T.U.; Chao, Y.; Li, S.; Du, K.; Xu, J.; Gao, Y.; Zuilhof, H.; et al. Tiara[5]arenes: Synthesis, solid-state conformational studies, host–guest properties, and Application as Nonporous Adaptive Crystals. Angew. Chem. Int. Ed. 2020, 59, 3994–3999. [Google Scholar] [CrossRef]
  35. Lei, S.-N.; Xiao, H.; Zeng, Y.; Tung, C.-H.; Wu, L.-Z.; Cong, H. BowtieArene: A dual macrocycle exhibiting stimuli-responsive fluorescence. Angew. Chem. Int. Ed. 2020, 59, 10059–10065. [Google Scholar] [CrossRef]
  36. Wu, J.-R.; Mu, A.U.; Li, B.; Wang, C.-Y.; Fang, L.; Yang, Y.-W. Desymmetrized leaning pillar[6]arene. Angew. Chem. Int. Ed. 2018, 57, 9853–9858. [Google Scholar] [CrossRef]
  37. Wu, J.-R.; Li, B.; Yang, Y.-W. Separation of bromoalkanes isomers by nonporous adaptive crystals of leaning pillar[6]arene. Angew. Chem. Int. Ed. 2020, 59, 2251–2255. [Google Scholar] [CrossRef]
  38. Wu, J.-R.; Yang, Y.-W. Geminiarene: Molecular scale dual selectivity for chlorobenzene and chlorocyclohexane fractionation. J. Am. Chem. Soc. 2019, 141, 12280–12287. [Google Scholar] [CrossRef]
  39. Wu, J.-R.; Wang, Y.; Yang, Y.-W. Elongated-geminiarene: Syntheses, solid-state conformational investigations, and application in aromatics/cyclic aliphatics separation. Small 2020, 16, 2003490. [Google Scholar] [CrossRef]
  40. Han, X.-N.; Han, Y.; Chen, C.-F. Pagoda[4]arene and i-Pagoda[4]arene. J. Am. Chem. Soc. 2020, 142, 8262–8269. [Google Scholar] [CrossRef]
  41. Zhang, Z.-Y.; Li, C. Biphen[n]arenes: Modular synthesis, customizable cavity sizes, and diverse skeletons. Acc. Chem. Res. 2022, 55, 916–929. [Google Scholar] [CrossRef]
  42. Wu, J.-R.; Cai, Z.; Wu, G.; Dai, D.; Liu, Y.-Q.; Yang, Y.-W. Bottom-up solid-state molecular assembly via guest-induced intermolecular interactions. J. Am. Chem. Soc. 2021, 143, 20395–20402. [Google Scholar] [CrossRef]
  43. Wu, J.-R.; Wu, G.; Li, D.; Dai, D.; Yang, Y.-W. Guest-induced amorphous-to-crystalline transformation enables sorting of haloalkane isomers with near-perfect selectivity. Sci. Adv. 2022, 8, eabo2255. [Google Scholar] [CrossRef]
  44. Joseph, R.; Naugolny, A.; Feldman, M.; Herzog, I.M.; Fridman, M.; Cohen, Y. Cationic pillararenes potently inhibit biofilm formation without affecting bacterial growth and viability. J. Am. Chem. Soc. 2016, 138, 754–757. [Google Scholar] [CrossRef]
  45. Yu, G.; Zhou, J.; Shen, J.; Tang, G.; Huang, F. Cationic pillar[6]arene/ATP host–guest recognition: Selectivity, inhibition of ATP hydrolysis, and application in multidrug resistance treatment. Chem. Sci. 2016, 7, 4073–4078. [Google Scholar] [CrossRef]
  46. Wang, M.; Zhou, J. Discovery of non-classical complex models between a cationic water-soluble pillar[6]arene and naphthalenesulfonate derivatives and their self-assembling behaviors. Soft Matter 2019, 15, 4127–4131. [Google Scholar] [CrossRef]
  47. Zhou, J.; Yang, J.; Zhang, Z.; Yu, G. A cationic water-soluble biphen[3]arene: Synthesis, host–guest complexation and fabrication of a supra-amphiphile. RSC Adv. 2016, 6, 77179–77183. [Google Scholar] [CrossRef]
  48. Thordarson, P. Determining association constants from titration experiments in supramolecular chemistry. Chem. Soc. Rev. 2011, 40, 1305–1323. [Google Scholar] [CrossRef]
Scheme 1. Synthesis of (a) CWP[5]L and (b) CWP[5]A. (c) Chemical structures of selected aliphatic sulfonate guests G1G4 investigated in this study.
Scheme 1. Synthesis of (a) CWP[5]L and (b) CWP[5]A. (c) Chemical structures of selected aliphatic sulfonate guests G1G4 investigated in this study.
Molecules 27 06259 sch001
Figure 1. (a) 1H NMR spectra (400 MHz, D2O, 298 K) of G1, G1 + CWP[5]L and CWP[5]L. Concentrations of host and guest are all 4.0 mM; (b) 2D ROE analysis of CWP[5]L with G1 in D2O with a mixing time of 300 ms (600 MHz, 298 K; the concentrations of CWP[5]L and G1 are 4 mM and 5 mM, respectively).
Figure 1. (a) 1H NMR spectra (400 MHz, D2O, 298 K) of G1, G1 + CWP[5]L and CWP[5]L. Concentrations of host and guest are all 4.0 mM; (b) 2D ROE analysis of CWP[5]L with G1 in D2O with a mixing time of 300 ms (600 MHz, 298 K; the concentrations of CWP[5]L and G1 are 4 mM and 5 mM, respectively).
Molecules 27 06259 g001
Figure 2. Cartoon representation of the 1:1 inclusion complexation between CWP[5]L and guests G1G4 (from left to right), and the [2]pseudorotaxane structures of the complexes of G1CWP[5]L and G2CWP[5]L.
Figure 2. Cartoon representation of the 1:1 inclusion complexation between CWP[5]L and guests G1G4 (from left to right), and the [2]pseudorotaxane structures of the complexes of G1CWP[5]L and G2CWP[5]L.
Molecules 27 06259 g002
Figure 3. Non-linear curve-fitting (NMR titrations) for the complexation between (a) CWP[5]L and G1, (b) CWP[5]L and G2, (c) CWP[5]L and G3, (d) CWP[5]L and G4, (e) CWP[5]A and G1, (f) CWP[5]A and G2, (g) CWP[5]A and G, and (h) CWP[5]A and G4 in D2O at 298 K. All the titration experiments were repeated thrice with the relative errors less than 15%.
Figure 3. Non-linear curve-fitting (NMR titrations) for the complexation between (a) CWP[5]L and G1, (b) CWP[5]L and G2, (c) CWP[5]L and G3, (d) CWP[5]L and G4, (e) CWP[5]A and G1, (f) CWP[5]A and G2, (g) CWP[5]A and G, and (h) CWP[5]A and G4 in D2O at 298 K. All the titration experiments were repeated thrice with the relative errors less than 15%.
Molecules 27 06259 g003
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Wu, J.-R.; Wu, G.; Cai, Z.; Li, D.; Li, M.-H.; Wang, Y.; Yang, Y.-W. A Water-Soluble Leggero Pillar[5]arene. Molecules 2022, 27, 6259. https://doi.org/10.3390/molecules27196259

AMA Style

Wu J-R, Wu G, Cai Z, Li D, Li M-H, Wang Y, Yang Y-W. A Water-Soluble Leggero Pillar[5]arene. Molecules. 2022; 27(19):6259. https://doi.org/10.3390/molecules27196259

Chicago/Turabian Style

Wu, Jia-Rui, Gengxin Wu, Zhi Cai, Dongxia Li, Meng-Hao Li, Yan Wang, and Ying-Wei Yang. 2022. "A Water-Soluble Leggero Pillar[5]arene" Molecules 27, no. 19: 6259. https://doi.org/10.3390/molecules27196259

APA Style

Wu, J. -R., Wu, G., Cai, Z., Li, D., Li, M. -H., Wang, Y., & Yang, Y. -W. (2022). A Water-Soluble Leggero Pillar[5]arene. Molecules, 27(19), 6259. https://doi.org/10.3390/molecules27196259

Article Metrics

Back to TopTop