1. Introduction
Contaminated milk and dairy products are one of the important sources of infections and food intoxication in humans. One of the causes of contamination of dairy products is their suitable conditions for the growth of many microorganisms. In cheese, depending on the preparation stages and ripening condition, there is a possibility of contamination with various spoilage and disease-causing bacteria, including
E. coli,
S. aureus,
L. monocytogenes, etc.
E. coli is part of the natural intestinal flora of all warm-blooded animals. The presence of this bacterium in water and food is accepted as an indicator of fecal contamination and the possible presence of dominant pathogens [
1].
S. aureus is the third cause of foodborne diseases in the world. This bacterium exists in the mammary ducts of cows suffering from mastitis and enters the milk during milking, and the use of this milk in the production of traditional cheese causes its contamination. Food intoxication with
S. aureus occurs as a result of consuming enterotoxin-contaminated food, and it can remain in cheese for a long time [
2].
L. monocytogenes is a facultative intracellular pathogenic organism to humans and animals. This is the cause of listeriosis infection in humans and animals. Symptoms of the disease in humans include abortion, encephalitis, meningitis, and septicemia (especially in people with a weak immune system) [
3]. Traditional milk products such as cheese, ice cream, etc., which are prepared from unpasteurized milk, can carry this bacteria [
4].
Today, people turn to herbal medicines for various reasons, including the high cost of chemical drugs and their side effects. Numerous studies have been conducted to find natural compounds with biological activities derived from plant, animal, and microbial resources because, on the one hand, common chemical drugs used to treat infectious diseases are becoming increasingly ineffective against microorganisms, and, on the other hand, consumers are becoming more aware of the negative effects of chemical and synthetic food preservatives [
5]. Medicinal plants are important sources of antimicrobial agents [
6,
7]. To date, more than 28,187 medicinal species are used by humans. There are over 13,400 plants with defined antimicrobial activity, and over 30,000 antimicrobial compounds have been isolated from plants [
8]. Essential oils and extracts have natural antimicrobial activity against a large number of spoilage and pathogenic bacteria; most of these compounds have phenolic active groups in their structure [
9]. These compounds can act as an active ingredient, a flavoring, and as a preservative (antibacterial) in food [
10]. Some plant families, such as
Lamiaceae, have not only antimicrobial but also antioxidant properties compared to other families [
11].
Lamiaceae is a family of plants that includes
Mentha longifolia. In temperate areas of central and southern Europe, southwest Asia, and Australia, it primarily grows wild in wet environments beside rivers and other waterways [
12,
13]. Research shows that the essential oils of the
Lamiaceae are cyclohexanes and aromatic, and pulegone as the main constituent of
M. longifolia oils has a specific aroma ranging from intense to spicy and vinegar. The main constituents of
M. longifolia essential oil are different in various studies. In several studies, the major constituents were pulegone, cineole, linalool, menthol, carvone, piperthone, thymol, beta-caryophyllene, etc. These compounds have antimicrobial properties [
14,
15].
In a study, it was found that
M. longifolia essential oil had a great inhibitory effect on
L. monocytogenes,
Klebsiella pneumoniae, fungi and yeasts, and
E. coli was the least sensitive [
16]. It has also been reported that the essential oil of
M. longifolia from different regions of Lorestan province in Iran exhibited high inhibitory effect against
Pseudomonas aeruginosa,
S. aureus, and
E. coli [
17].
Edible coatings as a consumable layer have adhesive, antioxidant, and antibacterial properties. By covering the surface of the product, these coatings prevent the reduction of moisture and the penetration of oxygen, and improve the appearance of the product [
18]. Many organic substances with antioxidant or antibacterial properties, such as plant essential oils and extracts, are added to edible coatings [
19]. The use of edible coatings to carry plant essential oils can reduce the negative effects of essential oils such as severe aroma and organoleptic changes [
20]. Various materials are used as edible coatings. Alginate is obtained from the cell wall of brown seaweed
Marocystis pyrifera. Alginates are considered emulsifiers, stabilizers, and thickeners [
21]. When a thin layer of gel or alginate solution dries, a film or coating forms that can maintain water-holding capacity, protect against microbial spoilage, and resist oxidation [
22].
Because chitosan is effective at preventing the growth of Gram-positive and Gram-negative bacteria, yeasts, and molds, it is used as an edible film and coating. Chitosan has natural antioxidant and antimicrobial properties that are affected by its concentration and molecular weight [
23]. Due to the increasing tendency to use natural preservatives, the objective of this study was to determine whether adding
M. longifolia essential oil and pulegone to edible coatings made of alginate and chitosan would affect the growth of
S. aureus,
L. monocytogenes, and
E. coli in cheese.
3. Material and Methods
Materials used in the study were S. aureus ATCC 29213, and L. monocytogenes ATCC 19,115 (from the fungus and bacteria collection center of the Iranian Scientific and Industrial Research Organization); E. coli O157 ATCC 43,895 (from the Department of Microbiology, Faculty of Veterinary Medicine, University of Tehran); Sodium alginate (Sigma-Aldrich, St. Louis, MO, USA); chitosan with a deacetylation level of greater than 75% (Sigma-Aldrich, St. Louis, MO, USA); Tryptic Soy Broth (TSB); Baird parker agar; Sorbitol-MacConkey agar; Palcam Listeria-Selective agar culture media (Merck, Darmstadt, Germany); and pulegone active ingredient (99.9% purity, Barij Essence Pharmaceutical Company, Kashan, Iran).
3.1. Collection of Plants and Production of Essential Oils
After the scientific confirmation of the species by plant science experts at University of Jiroft Herbarium,
M. longifolia was taken in May 2021 from a cold area of Jiroft City. The aerial part of this plant was dried in the shade and ambient temperature. After drying, the plant was ground. About 100 g of dried sample was placed in 400 mL distilled water and submitted to hydrodistillation for 3 h using a Clevenger-type apparatus [
24]. The yield of essential oil extraction from
M. longifolia was 1%(
v/
w), and it was colorless. Gas chromatography (Shimadzu single quadrupole GCMS-QP2010 SE, Kyoto, Japan) equipped with a mass spectrometer (GC-MS) was used to determine the chemical composition of
M. longifolia essential oil. Compounds were separated on HP-5 MS capillary column (30 m × 0.25 mm, film thickness 0.25 μm; Little Falls). A sample of 1.0 μL was injected in the split mode with split ratio 1:100. Helium was used as a carrier gas at a flow rate of 1.0 mL/min. The injection temperature was 230 °C. Compounds were further identified and authenticated using their complete mass fragmentation data compared to the NIST02.L and WILEY7n.L mass spectral libraries and published mass spectra and, wherever possible, by coinjection with authentic standards [
24].
3.2. Preparation of Cheese
Lactic cheese samples were prepared at Pegah Dairy Company of Jiroft. The steps were as follows:
First, raw milk was standardized (the amount of fat (3%) and dry matter (15%) was adjusted). Then the milk temperature rose to 96 °C. A mixture of sour yogurt and vinegar was added to the hot stirring milk until the milk was completely coagulated. The clot was cut, drained, and poured into plastic molds, and within 5 h, the molds were returned to complete dehydration. Cheese pieces were placed in salt solution (16%) at 5 °C, and after 72 h, the relevant tests (pH, moisture content, salt content) were performed on them [
16]. The pH, moisture, and salt content of the cheese samples were 5.5, 65, and 4%, respectively [
25].
3.3. Treatment of Cheese Samples
The cheese samples were cut into cubes (length, width, and height of 3 cm) and coated by immersion method, during which the samples were immersed in the coating mixtures for 1 min until all surfaces of the cheese samples were completely covered with the coating material. Coating mixtures were sodium alginate solution (25%) with concentrations of 0, 5, and 10% chitosan and different concentrations of
M. longifolia essential oil (0, 100, and 150 ppm) as well as different concentrations of pulegone (10, 25, and 50 ppm). The samples were then placed in an incubator (Fan Azma Gostar, Tehran, Iran) under controlled temperature and humidity (about 12 °C and relative humidity of 85%) for approximately 8 h until the coatings were dry [
26].
In the pre-test, we used higher concentrations of M. longifolia essential oil and pulegone in the coatings, and a sensory evaluation test was also performed. The maximum concentration of M. longifolia essential oil and pulegone was determined according to the results obtained from the sensory evaluation. By increasing the concentration more than 150 ppm for M. longifolia essential oil and 50 ppm for pulegone, the flavor and taste scores decreased. In this way, the studied concentrations were determined for essential oil and pulegone.
3.4. Inoculation of the Desired Bacteria into Cheese Samples
To inoculate the bacteria (
S. aureus,
L. monocytogenes, and
E. coli O157) into the cheese texture, bacterial suspensions containing 10
5 CFU/g were injected into 8 points of cheese samples with a sterile syringe. After that, the samples were placed in polypropylene containers and kept at 5 °C [
27]. Sampling and culture were performed once every 10 days for 1 month.
3.5. Bacterial Count in Cheese Samples
In order to count the bacteria, 1 g of the cheese sample was thoroughly homogenized in 9 mL of physiological saline. Then, 0.1 mL of this solution was cultured on specific media for each bacterium.
Baird Parker agar was used to count
S. aureus at 37 °C for 24–48 h [
28]. Sorbitol-MacConkey agar was used to count
E. coli O157 bacteria at 37 °C for 24–48 h [
29]. Palcam Listeria-Selective agar was used to count
L. monocytogenes at 36 °C for 24–48 h [
30].
3.6. Statistical Analysis
Analysis of variance (ANOVA) was used with the Statistix ver. 10 software to see whether there were any significant differences between the results. Differences at p ≤ 0.05 were considered significant. All experiments were performed in triplicate.
4. Discussion
Cheese is a ready-to-eat food product that is not subjected to any other treatment to ensure its safety before consumption. Contamination of cheese with foodborne pathogens may occur in several stages (before production, during production, and during storage period). Therefore, information on the main sources of pathogens and the mechanisms by which they infect the dairy chain is needed if contamination of any cheese is to be prevented [
31]. The use of different additives in cheese can partially inhibit its bacterial population. Essential oils, extracts, and powders of herbs are compounds that can be added to cheese to reduce microbial contamination and increase sensory properties. In this study, the effect of an edible coating containing alginate, chitosan (0, 5, and 10%),
M. longifolia essential oil (0, 100, and 150 ppm), and pulegone (0, 10, 25, and 50 ppm) on the growth of
E. coli,
S. aureus, and
L. monocytogenes in cheese was examined during three storage times. In general, by increasing the storage period (30 days) in all treatments, the number of bacteria in the cheese decreased. This decrease was more pronounced in treatments with increasing concentrations of chitosan, essential oil, and pulegone. The effect of the studied treatments on reducing the growth of
E. coli was greater than the other two bacteria. In general, the pulegone active ingredient was more effective in reducing the growth of bacteria than the
M. longifolia essential oil.
Studies have demonstrated the antibacterial properties of chitosan,
M. longifolia essential oil, and the pulegone active component. Evaluation of the antimicrobial effects of
M. longifolia essential oil against
E. coli,
S. aureus, and
Candida albicans showed that the pulegone and 1,8-cineole compounds are important in this regard [
32]. In our previous study on the same essential oil, the compounds of piperitenone oxide (26.07%), pulegone (19.72%), piperitenone (11.88%), and 1,8-cineole (8.21%) were the major compounds present in the essential oil that can play a very important role in its antimicrobial activity [
33].
M. longifolia essential oil has been found to have strong antibacterial properties against a variety of bacteria, including
Staphylococcus,
Pseudomonas,
Bacillus, and
E. coli, as well as some fungal strains including
Aspergillus,
Fusarium, and
Penicillium [
34].
It has been reported that one of the key characteristics of essential oils and active substances is the hydrophobic property, which led to the change and destruction of the cell membrane structure and their greater permeability. This is concerning the action of these substances and their compounds in the death of pathogenic bacteria. The result is that the majority of the ions and other essential components of the cell leak out, which ultimately causes the bacterium’s death [
35]. It will lead to defects in the synthesis of many cell-wall polysaccharide compounds, and inhibit cell growth and morphogenesis [
36]. The antimicrobial performance of essential oils in vitro depends on various factors such as antimicrobial components, type of microorganism, culture medium, amount of inoculum, pH, temperature, and food composition [
37,
38]. It was related [
39] that, in a study on the antibacterial effect of
M. longifolia essential oil against several foodborne pathogens, pulegone, 1,8-cineole, and menthofuran were the most prevalent constituents of essential oils. Their results also showed that the most sensitive bacterium to
M. longifolia essential oil was
E. coli, which is consistent with our results. In another study, it was found that
M. longifolia from the mint family had antibacterial properties on
Staphylococcus and
Listeria species. The results of this study similarly confirm the results of our study [
40]. Studies have shown that the effect of different essential oils is concentration-dependent so that in low concentrations, phenolic compounds act on the enzymatic activity, particularly those involved in energy generation, but in high concentrations these can cause protein denaturation [
41]. In one study, the antibacterial effects of pulegone and 1,8-cineole against
S. aureus and
Salmonella typhimurium were investigated, and the results showed that 1,8-cineole has a stronger antibacterial effect on Gram-positive bacteria than Gram-negative bacteria, while pulegone has a higher antibacterial effect on Gram-negative bacteria [
42], which is consistent with the results of the present study.
Comparing the results of
M. longifolia essential oil and pulegone as the effective ingredient and the main composition of
M. longifolia essential oil, it was found that this substance had more antibacterial properties than the complete essential oil in much lower concentrations. Pulegone is a monoterpene ketone found in the leaves and flowers of several members of the mint family [
16]. Terpenes are capable of penetrating the bacterial cell wall, leading to the denaturation of proteins and disintegration of the cell membrane, leading to cytoplasmic leakage, cell lysis, and eventually cell death [
43]. Based on the published reports, pulegone can effectively destroy
S. aureus, S. typhimurium, and
E. coli [
44].
The antibacterial effects of trans-cinnamaldehyde, 1,8-cineole, and pulegone against
Streptococcus equi subsp. equi were investigated [
45]. According to the results, trans-cinnamaldehyde, 1,8-cineole, and pulegone possess antibacterial capabilities and may serve as a convenient and reasonably priced alternative to synthetic antibiotics. According to the results of the current study, chitosan in edible coatings inhibited bacterial growth as compared to the control, and antibacterial activity improved by increasing chitosan content.
In general, the antimicrobial activity of essential oils is expressed by several mechanisms:
Dissolving in the cytoplasmic membrane and interfering with the protein structure of the enzyme and destroying the microorganism;
Interruption in activities related to succinate and reactions related to NADH;
Disturbing electron transfer in the respiratory chain;
Creating a break in oxidative phosphorylation.
The lipophilic property of essential oils can explain its increased membrane permeability or destruction due to the activity of enzymes in the cell membrane such as protein kinase [
46].
Chitosan’s polycationic composition is thought to be the source of its antibacterial properties. The protonated amino group in chitosan interacts electrostatically with the negative residues on cellular surfaces to achieve antibacterial activity [
47]. With increasing levels of deacetylation, chitosan contains more protonated amino groups, which affects its antibacterial efficacy [
48]. The growth of aerobic bacteria can be inhibited by coverings made of chitosan. Chitosan coatings keep oxygen away from pathogenic bacteria because they block air penetration [
49,
50]. The antibacterial properties of chitosan film enhanced with oregano and thyme essential oils have been investigated [
51]. Their results showed that even at the lowest concentrations, the chitosan film with essential oils may suppress bacterial and fungal development. In comparison to the doses required to stop the development of the beneficial bacteria of
Lactobacillus rahmnosu and
Enterococcus faecium, all antimicrobial agents’ MIC and MBC against
E. coli and
S. aureus were extremely low.
In some studies [
52,
53,
54], the antibacterial effectiveness of chitosan as an edible coating against
L. monocytogenes on the surface of ready-to-eat roast beef was examined. Results showed that
L. monocytogenes on the surface of roast beef may be controlled by chitosan coatings. In [
55], the effects of an edible chitosan coating on the quality and shelf life of sliced mango fruit were investigated. Mango slices were exposed to aqueous solutions containing 0%, 0.5%, 1%, and 2% chitosan. The results showed that coating with chitosan efficiently stopped the growth of microorganisms.