Next Article in Journal
Soybean Antigen Protein-Induced Intestinal Barrier Damage by Trigging Endoplasmic Reticulum Stress and Disordering Gut Microbiota in Weaned Piglets
Next Article in Special Issue
A Green Approach to Obtaining Glycerol Carbonate by Urea Glycerolysis Using Carbon-Supported Metal Oxide Catalysts
Previous Article in Journal
Synthesis, Antifungal, and Antibacterial Activities of Novel Benzoylurea Derivatives Containing a Pyrimidine Moiety
Previous Article in Special Issue
Removal of Methylene Blue and Methyl Red from Aqueous Solutions Using Activated Carbons Obtained by Chemical Activation of Caraway Seed
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 28
Issue 18
10.3390/molecules28186499
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Magnetic Adsorbent Fe3O4/ZnO/LC for the Removal of Tetracycline and Congo Red from Aqueous Solution

by
Anjiu Zhao
†,
Qi Tang
†,
Yuanlong Chen
,
Chongpeng Qiu
* and
Xingyan Huang
*
College of Forestry, Sichuan Agricultural University, Chengdu 611130, China
*
Authors to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Molecules 2023, 28(18), 6499; https://doi.org/10.3390/molecules28186499
Submission received: 29 July 2023 / Revised: 31 August 2023 / Accepted: 6 September 2023 / Published: 7 September 2023
(This article belongs to the Special Issue Research on Green Adsorbents)
Browse Figures
Versions Notes

Abstract

:
Zeolitic imidazolate frameworks (ZIFs) can be used as an adsorbent to efficiently adsorb organic pollutants. However, ZIF nanoparticles are easy to form aggregates, hampering the effective and practical application in practical adsorption. In this study, the ZIF-8 was successfully loaded onto lignocellulose (LC) to further produce ZnO/LC by in situ growth method and hydrothermal treatment, and then Fe3O4 nanoparticles (Fe3O4 NPs) were loaded onto ZnO/LC to prepare magnetic Fe3O4/ZnO/LC adsorbent for removing tetracycline (TC) and congo red (CR) pollutants from aqueous solution. The adsorption properties of the adsorbent were systematically analyzed for different conditions, such as adsorbent dosage, solution pH, contact time, temperature and initial concentration. The experimental data were fitted using adsorption kinetic and isotherm models. The results showed that the pseudo-second-order model and Sips model were well fitted to the adsorption kinetic and adsorption isotherm, respectively. The adsorption capacities of TC and CR reached the maximum value of 383.4 mg/g and 409.1 mg/g in experimental conditions. The mechanism of the removal mainly includes electrostatic interaction, hydrogen bonding and π-π stacking. This novel adsorbent could be rapidly separated from the aqueous solution, suggesting its high potential to remove pollutants in wastewater.

1. Introduction

With the rapid development of the global economy, many organic (such as dyes, pharmaceutical drugs, surfactants, etc.) and inorganic (e.g., heavy metal ions and eutrophication ions) pollutants have been released into the global water environment without scientific treatment [1,2], which have great threats to ecosystem biodiversity and human health [3]. Tetracycline (TC), a common antibiotic group used in animal husbandry, can cause tanhe increase in resistance to the microorganism, and then become a big public health crisis [4]. Meanwhile, congo red (CR) has been widely used as a dye in industries, for example, dyeing, medicine, paper, printing, etc. [5,6,7]. However, due to the unregulated and excessive use of chemicals, large amounts of toxic waste and colored dyes have been discharged into nature, causing water, air and soil pollution, resulting in a significant increase in human genetic mutations, cancers, tumors and other diseases. Dyes also have a considerable adverse effect on fisheries and livestock [8,9]. Dyes have high thermal and hydrolytic stability, which makes them extremely difficult to biodegrade in nature, thereby it is difficult to remove them from industrial wastewater [10,11]. Hence, the removal of TC and CR from the aqueous solution is a meaningful act to ensure the sustainable development of human beings.
To date, various techniques, including biological treatment [12,13], membrane separation [14,15], photocatalysis [16,17], electrochemical degradation [18,19] and adsorption [20,21], have been exploited to remove TC and CR from wastewater. Among these methods, adsorption is considered the most promising treatment method owing to its facile and economical properties [20,22]. Various adsorbents, such as natural biopolymers, biochar, zeolite, activated carbon, etc., have been applied in the purification of wastewater [23,24]. Compared with commonly used adsorbents, lignocellulose (LC) is an easy-access, biodegradable, and low-cost adsorbent for removing organic pollutants [25]. However, due to the poor adsorption capacity of raw LC, it is necessary to improve its adsorption ability.
Nowadays, metal-oxide-based nanomaterials are considered promising materials for water treatment [26]. Among these metal-oxides, zinc oxide (ZnO) is well known as one of the most versatile nanostructured semiconductors with its unique electrical and optical properties [27]. ZnO nanomaterials have been widely applied in the fields of photocatalyst [28], solar cells [29] and sensors [30], but have not been usually used as adsorbent for the remediation of wastewater. However, due to its ease of availability, high specific surface area and positive surface charge at circumneutral pH, ZnO nanomaterials may have a great potential for the adsorption of organic pollutants [26]. Hence, the adsorption capacity of LC can be greatly improved by the modification of ZnO nanomaterials. The well-designed ZnO/LC has the potential to be applied for efficient adsorption of organic pollutants from wastewater. However, it is still a problem for the poor loading of ZnO onto LC under low-temperature reaction conditions.
Zeolitic imidazolate framework-8 (ZIF-8) is a representative member of metal-organic frameworks constructed by tetrahedral coordination of zinc cations to nitrogen in 2-methylimidazole (2-MIM) linkers. ZIF-8 has been applied as an adsorbent for dyes [31], heavy metal ions [32] and pharmaceutical remediation [21]. To increase the load of ZIF-8 on lignocellulose, the ZIF-8 can be efficiently loaded onto lignocellulose by an in situ growth method [33]. The surface of lignocellulose has a large number of groups, i.e., hydroxyl groups, which can react with the organic ligand 2-methylimidazole to form hydrogen bonds, and then the coordinated 2-methylimidazole binds to Zn2+ and grows on the surface to form crystals. However, several recent studies show that ZIF-8 is not stable in aqueous and extremely acidic solutions [34]. ZIF-8 has been used as a sacrificial precursor to obtain ZnO with excellent stability, large specific surface area and nano/micro-structures by hydrothermal treatment at 80 °C [35]. Therefore, the ZnO/LC composite can be prepared by hydrothermal treatment of the in situ growth of ZIF-8 on LC.
It is difficult to recycle the powdered adsorbents in practical applications, which need to be separated by filtration or centrifugation. It may increase the complexity and cost of reusability [36]. Fe3O4 nanoparticles (Fe3O4 NPs) have the advantages of stable chemical properties, high adsorption capacity, large specific surface area and easy magnetic separation [37]. Therefore, loading Fe3O4 NPs onto the ZnO/LC composites can be an efficient strategy to avoid these defects [38].
We herein report a simple method for the preparation of Fe3O4/ZnO/LC from LC, ZIF-8 and Fe3O4 NPs for the application of wastewater purification. The Fe3O4/ZnO/LC was characterized by FTIR, XRD, VSM, BET, XPS and SEM-EDS, and the adsorption behavior of TC and CR have been systematically investigated. The kinetic and isothermal studies were performed under different experimental conditions. Furthermore, the adsorption mechanism for TC and CR by Fe3O4/ZnO/LC was proposed in this work. The adsorbent prepared in this study has the advantages of a simple preparation process, with high adsorption efficiency, strong magnetism and easy recovery, and it has the potential for large-scale industrial application.

2. Results and Discussion

2.1. Characterization of Fe3O4/ZnO/LC

FTIR spectra were measured to analyze the functional groups of the LC, ZIF-8/LC and Fe3O4/ZnO/LC. As shown in Figure 1a, the peaks at 3440, 1368, 1210 and 1080 cm−1 were assigned to -OH stretching, the phenolic band, aromatic C-O stretch and secondary aliphatic alcohol stretch, respectively [3]. It indicated that the LC was successfully prepared compared with LC, and many new peaks appeared in ZIF-8/LC. For example, the characteristic peaks at 1579, 752 and 685 cm−1 were attributed to the C-N stretching and the entire imidazole ring stretching of ZIF-8 [39]. For Fe3O4/ZnO/LC, the band at 587 cm−1 corresponded to the adsorption peak of Fe-O, probably exhibiting that the ferroferric oxide nanoparticles were loaded onto the Fe3O4/ZnO/LC [4]. The band at 496 cm−1 was attributed to the bending vibration of Zn-O in ZnO. Meanwhile, the characteristic peaks of imidazole ring stretching of ZIF-8 were also weakened in Fe3O4/ZnO/LC. It was due to the ZnO formed from ZIF-8 after hydrothermal treatment [36]. These results demonstrated that the Fe3O4/ZnO/LC was successfully synthesized.
The LC, ZIF-8/LC and Fe3O4/ZnO/LC were characterized via XRD to monitor the changes in their crystalline structure. As revealed in Figure 1b, the characteristic peaks of 2θ = 14.6°, 16.7° and 22.2° were ascribed to (101), (101) and (002) planes in typical native cellulose I structure of LC [40]. After the in situ growth of ZIF-8 onto LC, the cellulose I characteristic diffraction peaks were weakened in ZIF-8/LC. Meanwhile, the diffraction peaks of ZIF-8/LC at 2θ = 7.4°, 10.2°, 12.8°, 14.7°, 16.5° and 18.1° were assigned to (011), (002), (112), (022), (013) and (222) planes of ZIF-8, respectively [32]. These results indicated the triumphant in situ growth of ZIF-8 onto LC. The XRD pattern of Fe3O4/ZnO/LC showed the characteristic diffraction peaks at 2θ = 30.1°, 35.5°, 43.2°, 53.3°, 57.0° and 62.7°, which were corresponded to (220), (311), (400), (422), (511) and (440) planes, respectively, indicating that the inverse spinel-type Fe3O4 was loaded onto ZIF-8/LC [4]. The characteristic diffraction peaks of ZIF-8 almost disappeared in Fe3O4/ZnO/LC. Meanwhile, the characteristic diffraction peak at 2θ = 34.4° belonged to ZnO. This was because the ZIF-8 was almost destroyed to form ZnO [36]. The surface chemical compositions of the LC, ZIF-8/LC and Fe3O4/ZnO/LC samples were evaluated by XPS. As shown in Figure 1c, the major peaks in the LC were C1s and O1s. In contrast to the spectrum of LC, a Zn2p peak appeared in ZIF-8/LC, which was assigned to the Zn element of ZIF-8. Compared with the spectrum of ZIF-8/LC, a Fe2p peak appeared in Fe3O4/ZnO/LC, while the peak of Zn2p was weakened in Fe3O4/ZnO/LC. This was probably due to the Fe element of Fe3O4 and the formation of ZnO [41]. In Figure 1d, the binding energies of 1021.70 and 1044.75 eV were assigned to Zn 2p3/2 and Zn 2p1/2, respectively. In the spectrum of Fe 2p (Figure 1e), the obvious binding energies of 710.6 and 712.3 eV were assigned to Fe2+ and Fe3+ (Fe 2p3/2), respectively. A satellite peak at 718.9 eV may be attributed to the presence of Fe2+ [4], and the highest bonding energy peak at 724.7 eV was ascribed to the Fe3+ (Fe 2p1/2) of Fe3O4 [21]. The results indicated the existence of Fe3O4, which was in agreement with the FTIR and XRD results. The O1s spectrum of Fe3O4/ZnO/LC (Figure 1f) was divided into two peaks at 529.8 and 531.7 eV for metal-oxides (ZnO and Fe3O4) and C-O groups, respectively [42]. These results indicated that the ZnO and Fe3O4 were successfully loaded onto the LC.
The magnetic hysteresis curve of Fe3O4/ZnO/LC was evaluated, as noticed in Figure 2a. The saturation magnetization of Fe3O4/ZnO/LC could reach 23.7 emu/g, which was much higher than that of β-CD@MRHC (17.4 emu/g) [43]. Thus, the superparamagnetic characteristic Fe3O4/ZnO/LC was demonstrated to be effective in separating the adsorbent from water under the function of an outer magnetic field [4]. It was evidenced from Figure 2b that the N2 adsorption/desorption isotherms of Fe3O4/ZnO/LC belonged to type-IV adsorption/desorption isotherms, which were typical for mesoporous materials [26]. Meanwhile, the BET results also indicated that the Fe3O4/ZnO/LC adsorbent had numerous small size pores. This pore structure was beneficial for providing more accessible adsorption sites for TC and CR uptake. It suggested that the Fe3O4/ZnO/LC had good potential for practical application.
The surface morphologies of LC, ZIF-8/LC and Fe3O4/ZnO/LC were evaluated. As shown in Figure 3a, typical fiber structures were clearly observed from LC, ZIF-8/LC and Fe3O4/ZnO/LC. In addition, the surface of LC was covered by ZIF-8, which proved the successful in situ growth of ZIF-8 onto LC (Figure 3b). Moreover, there were some nanospheres formed on the surface and channel of Fe3O4/ZnO/LC (Figure 3c,d), suggesting successful loading of Fe3O4 nanoparticles. Meanwhile, some rod-shaped nanoparticles appeared on the surface of Fe3O4/ZnO/LC. It was probably attributed to ZnO particles transformed by ZIF-8 after hydrothermal treatment [21]. The element (C, O, Zn and Fe) composition and distribution on Fe3O4/ZnO/LC were investigated by EDS elemental mapping. Furthermore, the element mapping images of Fe3O4/ZnO/LC showed that C, O, Zn and Fe were evenly distributed on the Fe3O4/ZnO/LC surface (Figure 3e).

2.2. Adsorption Study

2.2.1. Comparison of Adsorption Properties of LC, ZnO/LC and Fe3O4/ZnO/LC

As shown in Table 1, compared with LC, the adsorption performance of ZnO/LC for TC and CR improved slightly. When Fe3O4 was introduced, the adsorption performance of the adsorbent has been remarkably improved. It was due to the increase in the available adsorption sites in ZnO/LC/Fe3O4. It was suggested that Fe3O4 had a promoting effect on the adsorption performance of the adsorbent.

2.2.2. Effect of Temperature on the TC and CR Adsorption

Figure 4 shows the change of adsorption performance of the adsorbent from 25 °C to 45 °C. As the temperature increased, the adsorption performance of Fe3O4/ZnO/LC had been slightly improved. However, as compared with the performance at room temperature, the adsorption capacity caused by the increase in temperature was not remarkable. Therefore, room temperature (25 °C) was used to carry out the subsequent experiments.

2.2.3. Effect of Adsorbent Dosage on the TC and CR Adsorption

The effect of the Fe3O4/ZnO/LC dosage on the adsorption is shown in Figure 5. The adsorption capacity of Fe3O4/ZnO/LC increased with the increase in adsorbent dosage from 0.2 to 1.0 g/L. However, when the adsorbent dose exceeded 0.5 g/L, the increase rate of adsorption capacity was reduced, which indicated that the adsorption capacity of Fe3O4/ZnO/LC tended to be saturated. This phenomenon could be ascribed to the aggregation and overlap of adsorption sites caused by the excessive adsorbents [44]. Therefore, 0.5 g/L Fe3O4/ZnO/LC was selected as the optimal adsorbent dosage in this study.

2.2.4. Effect of Solution pH on the TC and CR Adsorption

The solution pH of TC and CR are the most important factors in the adsorption process. The existence state of TC and CR molecules and the surface charge of the Fe3O4/ZnO/LC can be influenced by solution pH [45]. Therefore, the effect of solution pH on TC and CR adsorption was investigated in this work. As shown in Figure 6a, the adsorption capacity of TC increased first and then decreased as solution pH > 8. When the solution pH was lower than 3.5, the low TC adsorption capacity was ascribed to the electrostatic repulsion between the positive charge of TC (TCH3+) and Fe3O4/ZnO/LC (protonation of -OH) [46]. The increase in TC adsorption capacity was attributed to the weakened electrostatic repulsion for the zwitterion TCH20 formed by deprotonation of TC within solution pH values of 3.5–7.5 [45]. When the solution pH was higher than 7.5, there was an electrostatic repulsion between the negative charge of TC (TCH- or TC2-) and Fe3O4/ZnO/LC, resulting in a decrease in TC adsorption capacity [47].
As shown in Figure 6b, the adsorption capacity of Fe3O4/ZnO/LC for CR increased from 100.2 to 196.1 mg/g, and that for CR was increased by 200.1 to 376.8 mg/g with increasing solution pH from 2 to 6 (Figure 6b). This might be attributed to the electrostatic attraction between amine group protonation (-NH3+) of Fe3O4/ZnO/LC and sulfonated groups (-SO3−) of CR in acid solution [48]. The ionic interaction between CR and -NH3+ in Fe3O4/ZnO/LC was competed by the huge numbers of H3O+, resulting in the reduction in CR adsorption capacity [49]. As the pH increased from 6 to 10, the adsorption capacity of Fe3O4/ZnO/LC on CR significantly decreased, which may be due to the increase in negative charge on the surface of Fe3O4/ZnO/LC, resulting in its weakened electrostatic attraction with CR.

2.2.5. Adsorption Kinetics

Adsorption kinetic is an index to analyze the process of adsorption experiments, adsorbent properties and adsorption mechanism by studying the rate of material transfer. In this study, three models were explored: the pseudo-first-order model (Equation (1)), the pseudo-second-order model (Equation (2)) and the Weber–Morris intraparticle diffusion model (Equation (3)) [50]. The model was fitted based on known data t (min) and qe (mg·g−1) to analyze the adsorption mechanism.
q t = q e × 1 − e − k 1 t
q t = q e 2 k 2 t 1 + q e k 2 t
q t = k d t 0.5 + C
where t is contact time (h); qe is the adsorbed concentration of TC and CR (mg/g) at equilibrium; qt is the equilibrium concentration of TC and CR (mg/g) at time t; k1 and k2 are the rate constants (g/mg·h); kd is the intraparticle diffusion rate constant (mg/g·min); and C is the thickness of the boundary layer at different stages of the intraparticle diffusion model.
As shown in Figure 7a, the amount of TC and CR adsorbed on the Fe3O4/ZnO/LC both increased rapidly with a prolonged contact time and then tended to be equilibrium. It was ascribed to the adsorption sites of Fe3O4/ZnO/LC decreased with contact time [33]. The fitting results and kinetic parameters are shown in Figure 7b–f and Table 2. By comparing the determination coefficients (R2) of all models, it could be concluded that the adsorption of CR onto Fe3O4/ZnO/LC was better fitted to the pseudo-second-order model. It indicated that the adsorption process of TC and CR on Fe3O4/ZnO/LC involved a chemical process of electron sharing and electron transfer [51,52]. Therefore, it could be speculated that the adsorption performances of Fe3O4/ZnO/LC for TC and CR were mainly controlled by chemical adsorption. According to the internal diffusion model (Figure 8), the adsorption process could be divided into two stages: first, TC and CR were absorbed by the fast adsorption part of the adsorbent, which combined the effects of surface contact mass transfer and internal diffusion; the second stage, TC and CR were slowly diffused into the pores of the adsorbent until adsorption saturation was reached. The linear fitting curve did not pass through the origin, confirming that the internal diffusion mechanism of the particles was not the rate-limiting step of the TC and CR adsorption process and that there were other adsorption forces such as surface distribution [53].

2.2.6. Adsorption Isotherms

Adsorption isotherm models are usually used to characterize the adsorption function and adsorption mechanism of adsorbents, which reflect the relationship between adsorbate and adsorbent mass. The Langmuir (Equation (4)), Freundlich (Equation (5)), Sips (Equation (6)) and Weber–Morris (Equation (7)) isotherm models were studied to evaluate the adsorption performance of Fe3O4/ZnO/LC to TC and CR [54].
q e = K L q m C e 1 + K F C e
q e = K F C e 1 n
q e = q m K S C e 1 / n 1 + K S C e 1 / n
q e = B T Ln K T + B T L n C e
where qe is the equilibrium dye concentration on the adsorbent (mg/g); Ce is the concentration of dye at equilibrium (mg/L); qm is the maximum adsorption capacity (mg/g); n is the exponent (dimensionless); BT is a constant related to Temkin adsorption heat (J mol−1); and KF, KL, KS, and KT represent Freundlich, Langmuir, Sips and Weber–Morris adsorption constants [55].
One of the essential characteristics of the Langmuir isotherm can be expressed by a dimensionless constant, separation factor, RL is defined as Equation (8) [56]:
R L = 1 1 + Κ L C 0
where RL is a dimensionless equilibrium parameter or the separation factor and C0 is the initial dye concentration of adsorbate solution (mg/L). The value of RL denotes the adsorption nature to be unfavorable (RL > 1), favorable (0 < RL < 1), irreversible (RL = 0) or linear (RL = 1).
The fitting results and parameters of these four adsorption isotherms have been summarized in Figure 9 and Table 3. The correlation coefficient of the three models indicated that the adsorption of TC and CR on the Fe3O4/ZnO/LC was better fitted with Sips isotherm. It suggested that the adsorption of TC and CR onto the Fe3O4/ZnO/LC was a combined model: diffuse (at low concentration) and monomolecular (at high concentration) [33]. Meanwhile, the calculated RL from the Langmuir model was between 0 and 1, demonstrating that the adsorptions of TC and CR onto the Fe3O4/ZnO/LC were favorable. The adsorption amounts of TC and CR calculated from the Sips isotherm model were 678.6 and 548.0 mg/g (Table 3), respectively, which were higher than most of the previously reported works (Table 4).

2.3. Adsorption Mechanism

The Fe3O4/ZnO/LC had a large specific surface area and a rich pore structure to facilitate the adsorption of TC and CR molecules. Figure 10a illustrates the removal efficiency during the adsorption of TC and CR after three cycles. The removal rate remained above 50% after three cycles. These results indicated that the Fe3O4/ZnO/LC had high stability and excellent reusability, which was a promising adsorbent for the TC and CR removal. The adsorption performances of TC and CR were related to the change in the initial solution’s pH. It was ascribed to the electrostatic attraction between the adsorbent and the pollutant. In order to further clarify the adsorption mechanism of TC and CR onto Fe3O4/ZnO/LC, the functional groups on the surface of Fe3O4/ZnO/LC before and after adsorption of TC and CR were detected by FTIR (Figure 10b). It could be seen that the IR spectra after the adsorption spectrum were different from that of the original Fe3O4/ZnO/LC, which was certainly due to the adsorption of TC and CR molecules. The C-H band at 2925–2964 cm−1 disappeared, which could be due to the extensive removal of hydrogen during the adsorption process. It could be seen that the peak originally at 3380 cm−1 was shifted to 3350 cm−1, which was due to the overlapping of the stretching vibration of the O-H and N-H, as well as the intermolecular hydrogen bonding with TC and CR molecules [62]. After the adsorption of TC and CR, the peak at 1640 cm−1 shifted to 1620 cm−1 after adsorption. This could be attributed to the π-π stacking interaction. After the adsorption of CR, new peaks at 1460 and 1050 cm−1 were observed due to the N=N stretching vibration and SO3− group, respectively [63]. Therefore, the mechanism of the TC adsorption on Fe3O4/ZnO/LC mainly includes electrostatic interaction, hydrogen bonding and π-π stacking [64].

3. Materials and Methods

3.1. Materials

The bamboo powder was ground from waste moso bamboo. Zinc acetate dihydrate (98%, C4H6O4Zn·2H2O), 2-methylimidazole (≥99.5%), iron chloride hexahydrate (99%, FeCl3·6H2O), iron chloride tetrahydrate (98%, FeCl2·4H2O), tetracycline (TC, 96% in purity) and choline chloride (C4H14ClNO, 98%) were purchased from Shanghai Macklin Biochemical Co., Ltd. (Shanghai, China). Oxalic acid dihydrate, sodium hydroxide (NaOH), and methanol were provided by Kelong Chemical Reagent Co., Ltd. (Chengdu, China). All the chemicals were used directly without further purification. Congo red (CR) was obtained from Sinopharm Chemical Regent Co., Ltd. (Shanghai, China).

3.2. Synthesis of Fe3O4/ZnO/LC

Fe3O4/ZnO/LC was fabricated according to the following steps (Figure 11). In total, 0.5 g LC was dispersed in 50 mL deionized water and sonicated for 10 min to form LC suspension. The LC suspension was mixed with 1.5 g zinc acetate dihydrate for 6 h. After chelation, the 2-methylimidazole solution (3 g in 50 mL of deionized water) was then poured into the mixture and stirred for 10 min at 300 rpm. After the mixture was left for 5 h at room temperature, the precipitate was centrifuged with methanol several times as a white solid. Thereafter, the white solid was dried at 60 °C for 12 h to obtain ZIF-8/LC. The Fe3O4/ZnO/LC was prepared by a chemical co-precipitation method. In total, 1.4 g FeCl3·6H2O and 0.7 g FeCl2·4H2O were dissolved in a beaker with 450 mL deionized water and hydrothermally treated at 70 °C to dissolve them. In total, 1.625 g ZIF-8/LC was added to the solution. Then, 5M NaOH (50 mL) was added dropwise into the solution. The solution was stirred for 1 h and matured for 2 h. After removing the supernatant, the black solid was washed with deionized water to neutral pH and freeze-dried for 24 h to obtain Fe3O4/ZnO/LC.

3.3. Characterization

The surface morphology and composition of Fe3O4/ZnO/LC were analyzed via a scanning electron microscope (SEM, ZEISS Gemini 300, Shanghai, China) equipped with an energy dispersive spectrometer (EDS, OXFORD Xplore, Shanghai, China). The surface functional groups of Fe3O4/ZnO/LC were characterized by Fourier transform infrared spectra (FTIR, Nicolet-6700, Thermo Fisher Scientific, Waltham, MA, USA). The Fe3O4/ZnO/LC superficial chemistry properties were investigated through the X-ray photoelectron spectroscope (XPS, Thermo Fisher Scientific, Waltham, MA, USA). The crystallographic structure and phase composition characteristics of Fe3O4/ZnO/LC were analyzed by X-ray diffractometer (XRD, Rigaku SmartLab, Osaka, Japan) with Cu-Kα radiation within the 2θ range of 5–80°. The saturation magnetization was evaluated by a vibrating sample magnetometer (VSM). The specific surface area and pore size distribution of Fe3O4/ZnO/LC were determined by Brunauer Emmett Teller (BET) and Barret Joyner Halender (BJH) methods, respectively.

3.4. Adsorption Study

The adsorption experiments were conducted to determine the contact time (0–24 h), adsorbent dosage (0.2–1.0 g/L), temperature (25–45 °C), initial concentration (5–500 mg/L) and initial solution pH (2–10) effects on contaminants removal. All the experiments were conducted in the 100 mL Erlenmeyer flasks with 20 mL of contaminants solutions. The mixed solutions were shaken at 25 °C for a fixed time. After magnetic separation, the remaining solution was filtered using 0.45 μm millipore membrane filters. The concentration of residual TC and CR were measured by a UV–vis spectrophotometer (Unico, Shanghai, China) at wavelengths of 357 and 269.5 nm, respectively. The adsorption capacity (qt, mg/g) at time t was calculated as follows:
q t = ( C 0 − C t ) × V m
where C0 (mg/L) is the initial dye concentration; Ct (mg/L) is the final dye concentration at time t; m (mg) is the adsorbent mass and V (mL) is solution volume.

4. Conclusions

This study developed a facile approach to prepare Fe3O4/ZnO/LC adsorbent for application in the treatment of wastewater. This material was achieved via the in situ growth and transformation of ZIF-8 into ZnO on the LC surface by hydrothermal treatment. The successful preparations of ZnO and Fe3O4 NPs and their loading onto LC have been confirmed by SEM, FTIR, XRD and XPS analysis. The EDS analysis and elemental mapping revealed that ZnO and Fe3O4 NPs were dispersed well on the LC surface. The VSM analysis results showed an excellent magnetic performance of Fe3O4/ZnO/LC (23.7 emu/g). In addition, adsorption conditions such as initial concentration, adsorbent dosage solution pH, contact time and temperature had remarkable effects on the adsorption performance of Fe3O4/ZnO/LC. Isothermal adsorption data for TC and CR could be better fitted by the Sips isotherm model. The estimated maximum adsorption capacities were 678.6 and 548.0 mg/g for TC and CR, respectively, calculated by the Sips model at the optimized adsorption conditions. The present work provided a feasible pathway to develop a highly efficient magnetic adsorbent for wastewater treatment and environmental remediation. At the same time, the adsorbent has many advantages such as low cost, simple preparation and easy recovery. It has the possibility of large-scale industrial application, while its process for industrialization still needs to be further explored.

Author Contributions

Conceptualization, Q.T. and X.H.; methodology, A.Z.; software, Y.C. and C.Q.; validation, A.Z., Q.T. and C.Q.; formal analysis, Q.T.; investigation, Q.T.; resources, X.H.; data curation, Q.T.; writing—original draft preparation, A.Z.; writing—review and editing, C.Q.; visualization, C.Q.; supervision, X.H.; project administration, X.H.; funding acquisition, X.H. All authors have read and agreed to the published version of the manuscript.

Funding

This work was financially supported by the National Natural Science Foundation of China (32101598).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data are available as request to X.H.

Conflicts of Interest

The authors declare no conflict of interest.

Sample Availability

Sample is available as request to X.H.

References

  1. Le Moal, M.; Gascuel-Odoux, C.; Ménesguen, A.; Souchon, Y.; Étrillard, C.; Levain, A.; Moatar, F.; Pannard, A.; Souchu, P.; Lefebvre, A.; et al. Eutrophication: A new wine in an old bottle? Sci. Total Environ. 2019, 651, 1–11. [Google Scholar] [CrossRef] [PubMed]
  2. Kandile, N.G.; Nasr, A.S. New hydrogels based on modified chitosan as metal biosorbent agents. Int. J. Biol. Macromol. 2014, 64, 328–333. [Google Scholar] [CrossRef] [PubMed]
  3. Zhang, X.; Navarathna, C.M.; Leng, W.; Karunaratne, T.; Thirumalai, R.V.; Kim, Y.; Pittman, C.U.; Mlsna, T.; Cai, Z.; Zhang, J. Lignin-based few-layered graphene-encapsulated iron nanoparticles for water remediation. Chem. Eng. J. 2021, 417, 129199. [Google Scholar] [CrossRef]
  4. Zhou, J.; Ma, F.; Guo, H. Adsorption behavior of tetracycline from aqueous solution on ferroferric oxide nanoparticles assisted powdered activated carbon. Chem. Eng. J. 2020, 384, 123290. [Google Scholar] [CrossRef]
  5. Sathiyavimal, S.; Vasantharaj, S.; Shanmugavel, M.; Manikandan, E.; Nguyen-Tri, P.; Brindhadevi, K.; Pugazhendhi, A. Facile synthesis and characterization of hydroxyapatite from fish bones: Photocatalytic degradation of industrial dyes (crystal violet and Congo red). Prog. Org. Coat. 2020, 148, 105890. [Google Scholar] [CrossRef]
  6. Kishor, R.; Purchase, D.; Saratale, G.D.; Saratale, R.G.; Ferreira, L.F.R.; Bilal, M.; Chandra, R.; Bharagava, R.N. Ecotoxicological and health concerns of persistent coloring pollutants of textile industry wastewater and treatment approaches for environmental safety. J. Environ. Chem. Eng. 2021, 9, 105012. [Google Scholar] [CrossRef]
  7. Yadav, V.K.; Gnanamoorthy, G.; Ali, D.; Bera, S.P.; Roy, A.; Kumar, G.; Choudhary, N.; Kalasariya, H.; Basnet, A. Cytotoxicity, Removal of Congo Red Dye in Aqueous Solution Using Synthesized Amorphous Iron Oxide Nanoparticles from Incense Sticks Ash Waste. J. Nanomater. 2022, 2022, 5949595. [Google Scholar] [CrossRef]
  8. Haleem, A.; Shafiq, A.; Chen, S.-Q.; Nazar, M. A Comprehensive Review on Adsorption, Photocatalytic and Chemical Degradation of Dyes and Nitro-Compounds over Different Kinds of Porous and Composite Materials. Molecules 2023, 28, 1081. [Google Scholar] [CrossRef]
  9. Aljohani, M.M.; Al-Qahtani, S.D.; Alshareef, M.; El-Desouky, M.G.; El-Bindary, A.A.; El-Metwaly, N.M.; El-Bindary, M.A. Highly efficient adsorption and removal bio-staining dye from industrial wastewater onto mesoporous Ag-MOFs. Process. Saf. Environ. Prot. 2023, 172, 395–407. [Google Scholar] [CrossRef]
  10. Nachiyar, C.V.; Rakshi, A.; Sandhya, S.; Jebasta, N.B.D.; Nellore, J. Developments in treatment technologies of dye-containing effluent: A review. Case Stud. Chem. Environ. Eng. 2023, 7, 100339. [Google Scholar] [CrossRef]
  11. Khan, M.D.; Singh, A.; Tabraiz, S.; Sheikh, J. Current perspectives, recent advancements, and efficiencies of various dye-containing wastewater treatment technologies. J. Water Process. Eng. 2023, 53, 103579. [Google Scholar] [CrossRef]
  12. Mondal, B.; Adak, A.; Datta, P. Integrated UV–H2O2 and biological treatment processes for the removal of cationic surfactant. J. Environ. Eng. Sci. 2021, 16, 85–93. [Google Scholar] [CrossRef]
  13. Pradeep, N.V.; Anupama, S.; Navya, K.; Shalini, H.N.; Idris, M.; Hampannavar, U.S. Biological removal of phenol from wastewaters: A mini review. Appl. Water Sci. 2015, 5, 105–112. [Google Scholar] [CrossRef]
  14. Tashvigh, A.A.; Chung, T.-S. Facile fabrication of solvent resistant thin film composite membranes by interfacial crosslinking reaction between polyethylenimine and dibromo-p-xylene on polybenzimidazole substrates. J. Membr. Sci. 2018, 560, 115–124. [Google Scholar] [CrossRef]
  15. Zagklis, D.P.; Vavouraki, A.I.; Kornaros, M.E.; Paraskeva, C.A. Purification of olive mill wastewater phenols through membrane filtration and resin adsorption/desorption. J. Hazard. Mater. 2015, 285, 69–76. [Google Scholar] [CrossRef] [PubMed]
  16. Wang, W.; Fang, J.; Shao, S.; Lai, M.; Lu, C. Compact and uniform TiO2@g-C3N4 core-shell quantum heterojunction for photocatalytic degradation of tetracycline antibiotics. Appl. Catal. B Environ. 2017, 217, 57–64. [Google Scholar] [CrossRef]
  17. Turki, A.; Guillard, C.; Dappozze, F.; Ksibi, Z.; Berhault, G.; Kochkar, H. Phenol photocatalytic degradation over anisotropic TiO2 nanomaterials: Kinetic study, adsorption isotherms and formal mechanisms. Appl. Catal. B Environ. 2015, 163, 404–414. [Google Scholar] [CrossRef]
  18. Chen, S.; Tang, L.; Feng, H.; Zhou, Y.; Zeng, G.; Lu, Y.; Yu, J.; Ren, X.; Peng, B.; Liu, X. Carbon felt cathodes for electro-Fenton process to remove tetracycline via synergistic adsorption and degradation. Sci. Total Environ. 2019, 670, 921–931. [Google Scholar] [CrossRef] [PubMed]
  19. Liu, C.; Min, Y.; Zhang, A.-Y.; Si, Y.; Chen, J.-J.; Yu, H.-Q. Electrochemical treatment of phenol-containing wastewater by facet-tailored TiO2: Efficiency, characteristics and mechanisms. Water Res. 2019, 165, 114980. [Google Scholar] [CrossRef]
  20. Qu, Y.; Qin, L.; Liu, X.; Yang, Y. Magnetic Fe3O4/ZIF-8 composite as an effective and recyclable adsorbent for phenol adsorption from wastewater. Sep. Purif. Technol. 2022, 294, 121169. [Google Scholar] [CrossRef]
  21. Wang, Z.; Lai, C.; Qin, L.; Fu, Y.; He, J.; Huang, D.; Li, B.; Zhang, M.; Liu, S.; Li, L.; et al. ZIF-8-modified MnFe2O4 with high crystallinity and superior photo-Fenton catalytic activity by Zn-O-Fe structure for TC degradation. Chem. Eng. J. 2020, 392, 124851. [Google Scholar] [CrossRef]
  22. Zhang, Y.; Zhao, S.; Mu, M.; Wang, L.; Fan, Y.; Liu, X. Eco-friendly ferrocene-functionalized chitosan aerogel for efficient dye degradation and phosphate adsorption from wastewater. Chem. Eng. J. 2022, 439, 135605. [Google Scholar] [CrossRef]
  23. Deng, F.; Li, S.; Zhou, M.; Zhu, Y.; Qiu, S.; Li, K.; Ma, F.; Jiang, J. A biochar modified nickel-foam cathode with iron-foam catalyst in electro-Fenton for sulfamerazine degradation. Appl. Catal. B Environ. 2019, 256, 117796. [Google Scholar] [CrossRef]
  24. Wang, N.; Zhao, Q.; Li, Q.; Zhang, G.; Huang, Y. Degradation of polyacrylamide in an ultrasonic-Fenton-like process using an acid-modified coal fly ash catalyst. Powder Technol. 2020, 369, 270–278. [Google Scholar] [CrossRef]
  25. Chen, X.; Huang, Z.; Luo, S.-Y.; Zong, M.-H.; Lou, W.-Y. Multi-functional magnetic hydrogels based on Millettia speciosa Champ residue cellulose and Chitosan: Highly efficient and reusable adsorbent for Congo red and Cu2+ removal. Chem. Eng. J. 2021, 423, 130198. [Google Scholar] [CrossRef]
  26. Sharma, M.; Singh, J.; Hazra, S.; Basu, S. Adsorption of heavy metal ions by mesoporous ZnO and TiO2@ZnO monoliths: Adsorption and kinetic studies. Microchem. J. 2019, 145, 105–112. [Google Scholar] [CrossRef]
  27. Kegel, J.; Povey, I.M.; Pemble, M.E. Zinc oxide for solar water splitting: A brief review of the material’s challenges and associated opportunities. Nano Energy 2018, 54, 409–428. [Google Scholar] [CrossRef]
  28. Wang, S.; Kuang, P.; Cheng, B.; Yu, J.; Jiang, C. ZnO hierarchical microsphere for enhanced photocatalytic activity. J. Alloys Compd. 2018, 741, 622–632. [Google Scholar] [CrossRef]
  29. Son, D.-Y.; Im, J.-H.; Kim, H.-S.; Park, N.-G. 11% Efficient Perovskite Solar Cell Based on ZnO Nanorods: An Effective Charge Collection System. J. Phys. Chem. C 2014, 118, 16567–16573. [Google Scholar] [CrossRef]
  30. Kwon, J.; Hong, S.; Kim, G.; Suh, Y.D.; Lee, H.; Choo, S.-Y.; Lee, D.; Kong, H.; Yeo, J.; Ko, S.H. Digitally patterned resistive micro heater as a platform for zinc oxide nanowire based micro sensor. Appl. Surf. Sci. 2018, 447, 1–7. [Google Scholar] [CrossRef]
  31. Mahmoodi, N.M.; Oveisi, M.; Taghizadeh, A.; Taghizadeh, M. Synthesis of pearl necklace-like ZIF-8@chitosan/PVA nanofiber with synergistic effect for recycling aqueous dye removal. Carbohydr. Polym. 2020, 227, 115364. [Google Scholar] [CrossRef] [PubMed]
  32. Jiang, X.; Su, S.; Rao, J.; Li, S.; Lei, T.; Bai, H.; Wang, S.; Yang, X. Magnetic metal-organic framework (Fe3O4@ZIF-8) core-shell composite for the efficient removal of Pb(II) and Cu(II) from water. J. Environ. Chem. Eng. 2021, 9, 105959. [Google Scholar] [CrossRef]
  33. Zhang, X.-F.; Wang, Z.; Song, L.; Yao, J. In situ growth of ZIF-8 within wood channels for water pollutants removal. Sep. Purif. Technol. 2021, 266, 118527. [Google Scholar] [CrossRef]
  34. Zhang, H.; Zhao, M.; Yang, Y.; Lin, Y. Hydrolysis and condensation of ZIF-8 in water. Microporous Mesoporous Mater. 2019, 288, 109568. [Google Scholar] [CrossRef]
  35. Liu, X.; Li, Y.; Ban, Y.; Peng, Y.; Jin, H.; Bux, H.; Xu, L.; Caro, J.; Yang, W. Improvement of hydrothermal stability of zeolitic imidazolate frameworks. Chem. Commun. 2013, 49, 9140–9142. [Google Scholar] [CrossRef] [PubMed]
  36. Wang, Z.; He, Y.; Zhu, L.; Zhang, L.; Liu, B.; Zhang, Y.; Duan, T. Natural porous wood decorated with ZIF-8 for high efficient iodine capture. Mater. Chem. Phys. 2021, 258, 123964. [Google Scholar] [CrossRef]
  37. Yang, C.; Wang, P.; Li, J.; Wang, Q.; Xu, P.; You, S.; Zheng, Q.; Zhang, G. Photocatalytic PVDF ultrafiltration membrane blended with visible-light responsive Fe(III)-TiO2 catalyst: Degradation kinetics, catalytic performance and reusability. Chem. Eng. J. 2021, 417, 129340. [Google Scholar] [CrossRef]
  38. Liu, J.; Zhou, J.; Wu, Z.; Tian, X.; An, X.; Zhang, Y.; Zhang, G.; Deng, F.; Meng, X.; Qu, J. Concurrent elimination and stepwise recovery of Pb(II) and bisphenol A from water using β–cyclodextrin modified magnetic cellulose: Adsorption performance and mechanism investigation. J. Hazard. Mater. 2022, 432, 128758. [Google Scholar] [CrossRef]
  39. Jia, M.; Zhang, X.-F.; Feng, Y.; Zhou, Y.; Yao, J. In-situ growing ZIF-8 on cellulose nanofibers to form gas separation membrane for CO2 separation. J. Membr. Sci. 2020, 595, 117579. [Google Scholar] [CrossRef]
  40. Mussana, H.; Yang, X.; Tessima, M.; Han, F.; Iqbal, N.; Liu, L. Preparation of lignocellulose aerogels from cotton stalks in the ionic liquid-based co-solvent system. Ind. Crop. Prod. 2018, 113, 225–233. [Google Scholar] [CrossRef]
  41. Althabaiti, S.A.; Khan, Z.; Bawaked, S.M.; Al-Sheheri, S.Z.; Mokhtar, M.; Malik, M.A.; Narasimharao, K. PtOx deposited Fe3O4-ZnO/TiO2 nanocomposites for photocatalytic H2 production under visible light. J. Environ. Chem. Eng. 2023, 11, 110615. [Google Scholar] [CrossRef]
  42. Ge, J.; Lian, L.; Wang, X.; Cao, X.; Gao, W.; Lou, D. Coating layered double hydroxides with carbon dots for highly efficient removal of multiple dyes. J. Hazard. Mater. 2022, 424, 127613. [Google Scholar] [CrossRef] [PubMed]
  43. Naderi, Z.; Azizian, J.; Moniri, E.; Farhadyar, N. Synthesis and Characterization of Carboxymethyl Cellulose/β-Cyclodextrin/Chitosan Hydrogels and Investigating the Effect of Magnetic Nanoparticles (Fe3O4) on a Novel Carrier for a Controlled Release of Methotrexate as Drug Delivery. J. Inorg. Organomet. Polym. Mater. 2020, 30, 1339–1351. [Google Scholar] [CrossRef]
  44. Abdi, J.; Vossoughi, M.; Mahmoodi, N.M.; Alemzadeh, I. Synthesis of metal-organic framework hybrid nanocomposites based on GO and CNT with high adsorption capacity for dye removal. Chem. Eng. J. 2017, 326, 1145–1158. [Google Scholar] [CrossRef]
  45. Qiao, D.; Li, Z.; Duan, J.; He, X. Adsorption and photocatalytic degradation mechanism of magnetic graphene oxide/ZnO nanocomposites for tetracycline contaminants. Chem. Eng. J. 2020, 400, 125952. [Google Scholar] [CrossRef]
  46. Wu, C.-S.; Xiong, Z.-H.; Li, C.; Zhang, J.-M. Zeolitic imidazolate metal organic framework ZIF-8 with ultra-high adsorption capacity bound tetracycline in aqueous solution. RSC Adv. 2015, 5, 82127–82137. [Google Scholar] [CrossRef]
  47. Zhang, P.; Li, Y.; Cao, Y.; Han, L. Characteristics of tetracycline adsorption by cow manure biochar prepared at different pyrolysis temperatures. Bioresour. Technol. 2019, 285, 121348. [Google Scholar] [CrossRef]
  48. Chen, H.; Wageh, S.; Al-Ghamdi, A.A.; Wang, H.; Yu, J.; Jiang, C. Hierarchical C/NiO-ZnO nanocomposite fibers with enhanced adsorption capacity for Congo red. J. Colloid Interface Sci. 2019, 537, 736–745. [Google Scholar] [CrossRef] [PubMed]
  49. Pincus, L.N.; Rudel, H.E.; Petrović, P.V.; Gupta, S.; Westerhoff, P.; Muhich, C.L.; Zimmerman, J.B. Exploring the Mechanisms of Selectivity for Environmentally Significant Oxo-Anion Removal during Water Treatment: A Review of Common Competing Oxo-Anions and Tools for Quantifying Selective Adsorption. Environ. Sci. Technol. 2020, 54, 9769–9790. [Google Scholar] [CrossRef]
  50. Ho, Y.S.; McKay, G. Pseudo-second order model for sorption processes. Process Biochem. 1999, 34, 451–465. [Google Scholar] [CrossRef]
  51. Yang, W.; Han, Y.; Li, C.; Zhu, L.; Shi, L.; Tang, W.; Wang, J.; Yue, T.; Li, Z. Shapeable three-dimensional CMC aerogels decorated with Ni/Co-MOF for rapid and highly efficient tetracycline hydrochloride removal. Chem. Eng. J. 2019, 375, 122076. [Google Scholar] [CrossRef]
  52. Fan, S.; Huang, Z.; Zhang, Y.; Hu, H.; Liang, X.; Gong, S.; Zhou, J.; Tu, R. Magnetic chitosan-hydroxyapatite composite microspheres: Preparation, characterization, and application for the adsorption of phenolic substances. Bioresour. Technol. 2018, 274, 48–55. [Google Scholar] [CrossRef] [PubMed]
  53. Hu, A.; Yang, X.; You, Q.; Liu, Y.; Wang, Q.; Liao, G.; Wang, D. Magnetically hyper-cross-linked polymers with well-developed mesoporous: A broad-spectrum and highly efficient adsorbent for water purification. J. Mater. Sci. 2019, 54, 2712–2728. [Google Scholar] [CrossRef]
  54. Al-Asheh, S.; Banat, F.; Al-Omari, R.; Duvnjak, Z. Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data. Chemosphere 2000, 41, 659–665. [Google Scholar] [CrossRef] [PubMed]
  55. Kumara, N.T.R.N.; Hamdan, N.; Petra, M.I.; Tennakoon, K.U.; Ekanayake, P. Equilibrium Isotherm Studies of Adsorption of Pigments Extracted from Kuduk-kuduk (Melastoma malabathricum L.) Pulp onto TiO2Nanoparticles. J. Chem. 2014, 2014, 468975. [Google Scholar] [CrossRef]
  56. Vijayakumar, G.; Tamilarasan, R. Dharmendirakumar, Adsorption, Kinetic. Equilibrium and Thermodynamic studies on the removal of basic dye Rhodamine-B from aqueous solution by the use of natural adsorbent perlite. J. Mater. Environ. Sci 2012, 3, 157–170. [Google Scholar]
  57. Afkhami, A.; Moosavi, R. Adsorptive removal of congo red, a carcinogenic textile dye by chitosan hydrobeads: Binding mechanism, equilibrium and kinetics, Colloids and Surfaces A: Physicochemical and Engineering Aspects. J. Hazard. Mater. 2009, 299, 146–152. [Google Scholar] [CrossRef]
  58. Toor, M.; Jin, B. Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye. Chem. Eng. J. 2012, 187, 79–88. [Google Scholar] [CrossRef]
  59. Du, Q.; Sun, J.; Li, Y.; Yang, X.; Wang, Z.; Xie, L. Highly enhanced adsorption of congo red onto graphene oxide/chitosan fibers by wet-chemical etching off silica nanoparticles. Chem. Eng. J. 2014, 245, 99–106. [Google Scholar] [CrossRef]
  60. Zhao, Y.; Geng, J.; Wang, X.; Gu, X.; Gao, S. Tetracycline adsorption on kaolinite: pH, metal cations and humic acid effects. Ecotoxicology 2011, 20, 1141–1147. [Google Scholar] [CrossRef] [PubMed]
  61. Liu, S.; Wu, P.; Yu, L.; Li, L.; Gong, B.; Zhu, N.; Dang, Z.; Yang, C. Preparation and characterization of organo-vermiculite based on phosphatidylcholine and adsorption of two typical antibiotics. Appl. Clay Sci. 2017, 137, 160–167. [Google Scholar] [CrossRef]
  62. Huang, D.; Wu, J.; Wang, L.; Liu, X.; Meng, J.; Tang, X.; Tang, C.; Xu, J. Novel insight into adsorption and co-adsorption of heavy metal ions and an organic pollutant by magnetic graphene nanomaterials in water. Chem. Eng. J. 2019, 358, 1399–1409. [Google Scholar] [CrossRef]
  63. Fried, A.; Richter, D. Infrared absorption spectroscopy. In Analytical Techniques for Atmospheric Measurement; Wiley: Hoboken, NJ, USA, 2006; pp. 72–146. Available online: https://onlinelibrary.wiley.com/doi/book/10.1002/9780470988510#page=88 (accessed on 25 April 2006).
  64. Li, Y.; Lin, X.; Zhang, C.; Zhuang, Q.; Dong, W. Polydopamine magnetic microspheres grafted with sulfonic acid groups for efficient adsorption of tetracycline. Colloids Surfaces A Physicochem. Eng. Asp. 2021, 628, 127263. [Google Scholar] [CrossRef]
Molecules 28 06499 g001
Figure 1. FTIR spectra (a); XRD patterns (b); and XPS full spectrum (c) of the LC, ZIF-8/LC and Fe3O4/ZnO/LC; (d–f) Zn 2p, Fe 2p and O 1s XPS spectrum of Fe3O4/ZnO/LC.
Figure 1. FTIR spectra (a); XRD patterns (b); and XPS full spectrum (c) of the LC, ZIF-8/LC and Fe3O4/ZnO/LC; (d–f) Zn 2p, Fe 2p and O 1s XPS spectrum of Fe3O4/ZnO/LC.
Molecules 28 06499 g001
Molecules 28 06499 g002
Figure 2. VSM of Fe3O4/ZnO/LC (a); N2 adsorption–desorption isotherms of Fe3O4/ZnO/LC (b).
Figure 2. VSM of Fe3O4/ZnO/LC (a); N2 adsorption–desorption isotherms of Fe3O4/ZnO/LC (b).
Molecules 28 06499 g002
Molecules 28 06499 g003
Figure 3. SEM images of (a) LC, (b) ZIF-8/LC and (c,d) Fe3O4/ZnO/LC; EDS mapping images of C, O, Zn and Fe on the Fe3O4/ZnO/LC. (e) is the amplification image of (d).
Figure 3. SEM images of (a) LC, (b) ZIF-8/LC and (c,d) Fe3O4/ZnO/LC; EDS mapping images of C, O, Zn and Fe on the Fe3O4/ZnO/LC. (e) is the amplification image of (d).
Molecules 28 06499 g003
Molecules 28 06499 g004
Figure 4. The effect of solution temperature on the TC (a) and CR (b) adsorption.
Figure 4. The effect of solution temperature on the TC (a) and CR (b) adsorption.
Molecules 28 06499 g004
Molecules 28 06499 g005
Figure 5. The effect of adsorbent dosage on T and CR adsorption process.
Figure 5. The effect of adsorbent dosage on T and CR adsorption process.
Molecules 28 06499 g005
Molecules 28 06499 g006
Figure 6. The effect of solution pH on TC (a) and CR (b) adsorption process.
Figure 6. The effect of solution pH on TC (a) and CR (b) adsorption process.
Molecules 28 06499 g006
Molecules 28 06499 g007
Figure 7. The effect of contact time on the adsorption of (a) TC and (d) CR by Fe3O4/ZnO/LC; Linear plots of pseudo 1st order model for (b) TC and (e) CR uptake; Linear plots of pseudo 2nd order model for (c) TC and (f) CR uptake.
Figure 7. The effect of contact time on the adsorption of (a) TC and (d) CR by Fe3O4/ZnO/LC; Linear plots of pseudo 1st order model for (b) TC and (e) CR uptake; Linear plots of pseudo 2nd order model for (c) TC and (f) CR uptake.
Molecules 28 06499 g007
Molecules 28 06499 g008
Figure 8. The intraparticle diffusion of TC and CR by Fe3O4/ZnO/LC.
Figure 8. The intraparticle diffusion of TC and CR by Fe3O4/ZnO/LC.
Molecules 28 06499 g008
Molecules 28 06499 g009
Figure 9. Isotherm plots for the adsorption of (a) TC and (b) CR by Fe3O4/ZnO/LC.
Figure 9. Isotherm plots for the adsorption of (a) TC and (b) CR by Fe3O4/ZnO/LC.
Molecules 28 06499 g009
Molecules 28 06499 g010
Figure 10. Three cycles of TC and CR adsorption and desorption (a); FTIR spectra of Fe3O4/ZnO/LC before and after TC and CR adsorption (b).
Figure 10. Three cycles of TC and CR adsorption and desorption (a); FTIR spectra of Fe3O4/ZnO/LC before and after TC and CR adsorption (b).
Molecules 28 06499 g010
Molecules 28 06499 g011
Figure 11. Synthetic procedure of Fe3O4/ZnO/LC.
Figure 11. Synthetic procedure of Fe3O4/ZnO/LC.
Molecules 28 06499 g011
Table 1. The adsorption properties of TC and CR by LC, ZnO/LC and Fe3O4/ZnO/LC.
Table 1. The adsorption properties of TC and CR by LC, ZnO/LC and Fe3O4/ZnO/LC.
AdsorbentsAdsorbates
TCCR
LC94.7 mg/g109.6 mg/g
ZnO/LC169.7 mg/g166.8 mg/g
Fe3O4/ZnO/LC224.2 mg/g297.0 mg/g
Table 2. Parameters of TC and CR adsorption kinetic models by Fe3O4/ZnO/LC.
Table 2. Parameters of TC and CR adsorption kinetic models by Fe3O4/ZnO/LC.
ModelsParametersAdsorbates
TCCR
ExperimentalC0300300
qe,exp (mg/g)383.41409.12
Pseudo 1st orderk1 (g/mg·h)0.7930.0893
qe,cal (mg/g)178.05146.52
R20.88050.9691
Pseudo 2nd orderk2 (g/mg·h)0.0062−7.4595
qe,cal (mg/g)193.66169.65
R20.94020.9821
Weber–Morris intraparticle diffusion modelk1 (g/mg·h)41.478426.1916
R20.84840.6847
K2 (g/mg·h)2.23915.8279
R20.83050.9630
Table 3. Parameters of TC and CR adsorption isotherm model by Fe3O4/ZnO/LC.
Table 3. Parameters of TC and CR adsorption isotherm model by Fe3O4/ZnO/LC.
ModelsParametersAdsorbates
TCCR
LangmuirKL (L/g)0.01140.0083
qm (mg/g)543.5517.94
R20.94740.9710
RL0 < RL < 10 < RL < 1
FreundlichKF37.317.37
n2.31861.8379
R20.94290.9687
Sipsqm (mg/g)678.60547.96
KS ((mg/L)1/n)0.02080.0093
n1.29991.0527
R20.94940.9818
Weber–MorrisKT0.46510.08945
BT78.161284.6366
R20.79660.8651
Table 4. Comparison between various adsorbents used for CR and TC adsorption.
Table 4. Comparison between various adsorbents used for CR and TC adsorption.
Adsorbent Raw MaterialContaminantqmax/mg·g−1Reference
Chitosan hydrobeadsCR92.6[57]
Red mudCR4.1[58]
Graphene oxide/chitosan fibresCR294.0[59]
Fe3O4/ZnO/LCCR373.1This work
KaoliniteTC47[60]
VermiculiteTC36.8[61]
Fe3O4/ZnO/LCCR308.7This work
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Zhao, A.; Tang, Q.; Chen, Y.; Qiu, C.; Huang, X. Magnetic Adsorbent Fe3O4/ZnO/LC for the Removal of Tetracycline and Congo Red from Aqueous Solution. Molecules 2023, 28, 6499. https://doi.org/10.3390/molecules28186499

AMA Style

Zhao A, Tang Q, Chen Y, Qiu C, Huang X. Magnetic Adsorbent Fe3O4/ZnO/LC for the Removal of Tetracycline and Congo Red from Aqueous Solution. Molecules. 2023; 28(18):6499. https://doi.org/10.3390/molecules28186499

Chicago/Turabian Style

Zhao, Anjiu, Qi Tang, Yuanlong Chen, Chongpeng Qiu, and Xingyan Huang. 2023. "Magnetic Adsorbent Fe3O4/ZnO/LC for the Removal of Tetracycline and Congo Red from Aqueous Solution" Molecules 28, no. 18: 6499. https://doi.org/10.3390/molecules28186499

APA Style

Zhao, A., Tang, Q., Chen, Y., Qiu, C., & Huang, X. (2023). Magnetic Adsorbent Fe3O4/ZnO/LC for the Removal of Tetracycline and Congo Red from Aqueous Solution. Molecules, 28(18), 6499. https://doi.org/10.3390/molecules28186499

Article Metrics

Back to TopTop