Next Article in Journal
Advancements in Reference Gene Selection for Fruit Trees: A Comprehensive Review
Previous Article in Journal
MicroRNA Targets PAP1 to Mediate Melanization in Plutella xylostella (Linnaeus) Infected by Metarhizium anisopliae
Previous Article in Special Issue
Nerve Wrap for Local Delivery of FK506/Tacrolimus Accelerates Nerve Regeneration
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents

1
Department of Pharmaceutical Sciences, College of Pharmacy and Health Science, Ajman University, Ajman P.O. Box 346, United Arab Emirates
2
Center of Medical and Bio-Allied Health Sciences Research, Ajman University, Ajman P.O. Box 346, United Arab Emirates
3
Department of Clinical Sciences, College of Pharmacy and Health Science, Ajman University, Ajman P.O. Box 346, United Arab Emirates
4
College of Dentistry, Ajman University, Ajman P.O. Box 346, United Arab Emirates
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2024, 25(2), 1133; https://doi.org/10.3390/ijms25021133
Submission received: 30 December 2023 / Revised: 14 January 2024 / Accepted: 15 January 2024 / Published: 17 January 2024
(This article belongs to the Special Issue Recent Advances in Biopolymer Composites)

Abstract

:
Antimicrobial resistance (AMR) is a growing concern for the future of mankind. Common antibiotics fail in the treatment of microbial infections at an alarming rate. Morbidity and mortality rates increase, especially among immune-compromised populations. Medicinal plants and their essential oils, as well as iodine could be potential solutions against resistant pathogens. These natural antimicrobials abate microbial proliferation, especially in synergistic combinations. We performed a simple, one-pot synthesis to prepare our formulation with polyvinylpyrrolidone (PVP)-complexed iodine (I2), Thymus Vulgaris L. (Thyme), and Aloe Barbadensis Miller (AV). SEM/EDS, UV-vis, Raman, FTIR, and XRD analyses verified the purity, composition, and morphology of AV-PVP-Thyme-I2. We investigated the inhibitory action of the bio-formulation AV-PVP-Thyme-I2 against 10 selected reference pathogens on impregnated sterile discs, surgical sutures, cotton gauze bandages, surgical face masks, and KN95 masks. The antimicrobial properties of AV-PVP-Thyme-I2 were studied by disc diffusion methods and compared with those of the antibiotics gentamycin and nystatin. The results confirm AV-PVP-Thyme-I2 as a strong antifungal and antibacterial agent against the majority of the tested microorganisms with excellent results on cotton bandages and face masks. After storing AV-PVP-Thyme-I2 for 18 months, the inhibitory action was augmented compared to the fresh formulation. Consequently, we suggest AV-PVP-Thyme-I2 as an antimicrobial agent against wound infections and a spray-on contact killing agent.

1. Introduction

The recent COVID-19 pandemic left mankind traumatized and deeply wounded. Deep insecurity caused by shortages of medication, personal protective equipment (PPT), and overwhelmed medical facilities marked the disaster [1,2,3,4]. The uncontrollable, rapid transmission of the virus by air droplets caused mounting hospitalization and fatality rates globally [1,2,3,4]. COVID-19 enhanced the already ongoing problem of antimicrobial resistance (AMR) by an overuse of antimicrobials to save severely ill, co-morbid patients in emergency rooms [1,2,3,4,5,6]. Evolving multi-drug-resistant ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter spp., and Escherichia coli) are already reasons for exacerbating treatment duration, costs, and concern for several years [5,6,7,8,9,10,11,12,13,14,15]. ESKAPE pathogens linger in emergency units and hospital wards, where they escalate morbidity and mortality rates [5,6,7,8,9,10,11,12,13,14,15]. Investigators gain constantly more insight into the microbial morphology, properties, structure, and virulence factors that enable better defense strategies [8,9,10,11,12,13,14].
Medicinal plant-derived new generations of natural antimicrobial agents could support or replace ineffective common drugs [16,17,18,19,20,21,22]. Plants incorporate a plethora of bioactive compounds, which synergistically defend them against opportunistic pathogens and further threats since their existence [21,22]. The synergistic use of plant bioactive compounds could be an alternative to mitigate AMR-related outcomes. The increasing number of investigations confirms the endless opportunities derived from the plant kingdom. Different medicinal plants in one formulation exacerbate antimicrobial properties and form a new defense line against AMR. A mounting number of studies report successful combinations of plant extracts with different nanoparticles (NP). Nanomedicine can be an option to improve health outcomes in the future through better drug delivery, precision medicine, and biomedical applications [23]. Our group investigated iodine-based formulations, consisting of silver nanoparticles (AgNP) and/or plant extracts with inhibitory action against selections of reference microorganisms [24,25,26,27,28,29,30,31,32,33,34,35,36]. AMR remains a serious threat to the future of mankind because opportunistic pathogens develop resistance against many synthetic antimicrobials on the market. Iodine is a strong microbicide and has until now not been associated with any resistance phenomenon, although it has been used since history. Therefore, iodine-based formulations have the potential to be used with the purpose of inhibiting microorganisms. Adding iodine to the formulation enhances its antifungal and antibacterial properties, in agreement with our previous works. However, iodine must be protected by PVP in order to have long-lasting action. Here, the PVP-I2 complex acts as a slow-release reservoir of iodine molecules. Additionally, synergy between plant biocomponents and the PVP-I complex enriches the inhibition portfolio.
The materials we used in our group included Aloe Barbadensis Miller (Aloe Vera, AV), Salvia officinalis L. (Sage), Cinnamomum zeylanicum (Cinn), trans-cinnamic acid (TCA), iodine, polyvinylpyrrolidone (PVP), and AgNP [31,32,33,34,35,36].
Aloe Barbadensis Miller (Aloe Vera, AV) is established as a remedy for ailments in different cultures because of its diverse antimicrobial, anti-inflammatory, and soothing properties [37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66]. AV contains more than 75 bio-compounds, which include, for example, acemannan, aloin, emodin, galacturonic acid, and mannose [23,34,35,36,56,57,58,59,60,61,62,63,64,65,66]. Therefore, AV products are exponentially growing due to increasingly health-conscious consumers [42]. AV is utilized in oral care and hygiene products to prevent or mitigate inflammation, oral ulcers, plaque formation, gingivitis, and periodontal disease [49,50,51,52,67,68]. Biofilm formation on tooth surface areas is a major problem that causes dental caries and gingivitis over time [51,52,67,68,69]. Mouthwash, toothpastes, and hydrogels for wound treatment are common applications [49,50,51,52]. We utilized AV gel due to its antimicrobial, moisturizing, and health-promoting properties. Additionally, AV is a globally available, cost-effective, and sustainable resource [23,34,35,36,56,57,58,59,60,61,62,63,64,65,66].
AV and further medicinal plants, including their essential oils, have known antimicrobial, anti-inflammatory, and antioxidative properties [5,70,71,72,73]. Most of them are low-cost, easily available ingredients that can be found in almost every household. Such medicinal plants and their essential oils could play a pivotal role against AMR due to their antimicrobial properties and are therefore increasingly utilized in fields like wound and oral care [5,73,74,75,76]. Thymus Vulgaris L. (Thyme) grows in many parts of the world and has been known since history as a health-promoting plant [23,70,71,72,73,76,77,78,79]. The main components of Thyme extract are the monoterpenes thymol and carvacrol, which gained popularity as antimicrobial agents [73,80,81,82,83,84,85,86,87,88]. Depending on the type of extraction and the plant material, further components include phenolic acids like rosmarinic acid, gallic acid, caffeic acid, vanillic acid, syringic acid, and chlorogenic acid, as well as the flavonoids luteolin and apigenin [70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94]. These compounds are known for their antimicrobial properties and are involved, for example, in pharmaceutical, cosmeceutical, medicinal, and dental applications [5,16,17,18,34,36,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94]. Some of those include antimicrobial food packaging, oral and skin care products, wound, plaque- and biofilm-preventing treatments, as well as personal protective equipment (PPE) [5,16,17,18,34,36,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102]. Face masks are part of the PPE imperative in mitigating the proliferation of opportunistic microorganisms [2,4]. They form a barrier to microorganisms by reducing or preventing their access to the human respiratory tract and oral and nasal cavities [34,36,95,96,97,98,99,100,101]. We previously investigated formulations of AV gel with Salvia officinalis L. (Sage) and trans-cinnamic acid (TCA) in combination with polyvinylpyrrolidone (PVP) and iodine [34,35,36]. Our formulations (AV-PVP-I2, AV-PVP-Sage-I2, and AV-PVP-TCA-I2) showed interesting inhibitory action when impregnated on sterile discs, surgical sutures, cotton bandages, and surgical face masks [34,35,36]. Incorporating iodine into the formulations amplified the antimicrobial properties of our formulations and resulted in enlarged inhibitory zones on face masks, discs, sutures, and cotton bandages [34,35,36].
Iodine (I2) is known and utilized as a microbicide historically but is entailed with some side effects, including skin irritation, pain, skin discoloration, and uncontrolled iodine release [29,30,34,35,36,103,104,105,106,107,108]. Iodine forms different moieties consisting of molecular iodine, iodide ions, and tri and higher polyiodide anions, depending on the surrounding molecular structure [24,25,26,27,28,29,30,32,34,35,36,109,110,111,112,113]. Triiodides are the most stable form of polyiodides [29,30,34,35,36,109,110,111]. They have a negative charge and can form, according to local molecular surroundings, the inherently stable, symmetrical, linear “smart” units [I-I-I] or the less stable, nonlinear [I-I⋯I] moieties [29,30,34,35,36,109,110,111]. Nonlinear [I-I⋯I] moieties are more prone to uncontrolled iodine release and, therefore, abate the long-term stability and treatment durations [29,30,34,35,36,109,110,111]. The iodine release mechanisms can be controlled by ensuring the formation of “smart” triiodides [I-I-I] through the defined surroundings. The same effects can be achieved by simply stabilizing polyiodide groups within a matching complexing agent [29,30,34,35,36,109,110,111]. Polymeric matrices like polyvinylpyrrolidone (PVP) are used in many products in combination with iodine in the form of PVP-I2 and act as iodophor [29,34,35,36,103,104,105,106,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129]. PVP-I2, also called povidone iodine, is a basic microbicide and is available globally [29,34,35,36,103,104,105,106,125,126,127,128,129]. It is widely utilized as a gargle or mouthwash. It can also be used during the treatment of wounds and in surgical procedures for the prevention of infections and support of the healing process [34,35,36,103,104,105,106,107,108,125,126,127,128,129].
This study is based on our previous investigations related to “smart” triiodides and AV biohybrids [34,35,36]. Our new plant-based formulation AV-PVP-Thyme-I2 consists of Thyme maceration extract in synergy with AV gel, PVP, and iodine in accordance with our previous studies [34,35,36]. The bio-formulation AV-PVP-Thyme-I2 was studied using the analytical methods such as SEM/EDS, Raman spectroscopy, UV-vis, FTIR, and X-ray diffraction (XRD), which confirmed its purity and morphology. Our aim is to offer facile, non-toxic, sustainable, low-cost antimicrobial agents prepared by readily available basic ingredients (Thyme, AV, and PVP-I2) through one-pot synthesis. Such formulations can be potential solutions against AMR and could improve quality of life in times of crisis with supply shortages related to disinfectants, PPE, or antimicrobial agents.
Antimicrobial properties of the title bio-formulation AV-PVP-Thyme-I2 were verified using disc diffusion methods against 10 of our reference strains in comparison to gentamycin and nystatin. The studied microorganisms consisted of the fungus C. albicans WDCM 00054 Vitroids; the Gram-positive bacteria S. pneumonia ATCC 49619, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, and B. subtilis WDCM0003; as well as the Gram-negative E. coli WDCM 00013 Vitroids, P. mirabilis ATCC 29906, P. aeruginosa WDCM 00026 Vitroids, and K. pneumonia WDCM00097 Vitroids. Storing AV-PVP-Thyme-I2 for 18 months in the fridge in darkness ameliorated the antimicrobial properties against the same reference strains. We also investigated the inhibitory action of the biohybrid AV-PVP-Thyme-I2 by impregnating surgical PGA sutures, cotton bandages, and disposable surgical facemasks and KN95 facemasks.
C. albicans WDCM 00054 Vitroids was highly susceptible to AV-PVP-Thyme-I2, followed by Gram-positive and Gram-negative pathogens. The KN95 mask, the surgical face mask layers, and the cotton bandages showed the highest zones of inhibition (ZOI) against the microorganisms in descending order. The title formulation shows enhanced antimicrobial properties even after 18 months of storage. These results suggest the use of the bio-hybrid as an antifungal and antibacterial agent on KN95, surgical face masks, and cotton bandages to mitigate infections. They can be potentially utilized as spray-on contact killing agents on those materials, oral cavities, wounds, and inanimate surfaces in public or hospital settings. Future investigations are needed to verify the suggested applications of our bio-formulation AV-PVP-Thyme-I2 in the form of cell culture and cytotoxicity studies, as well as in vivo experiments.

2. Results and Discussion

AMR is marked by increased strains of multi-drug-resistant pathogens that are not susceptible to common antimicrobials [1,2,3,4,130]. Such treatment failures prove to be fatal, especially among elderly and immune-compromised patients affected by nosocomial infections [5,6,7,8,9,10,11,12,13,14,15,130]. ESKAPE pathogens are an inherent danger for the future of mankind [2,3,4,130]. Opportunistic pathogens like S. aureus, E. faecalis, S. pyogenes, E. coli, P. aeruginosa, and C. albicans can colonize oral cavities and form biofilms on and around teeth, as well as on the dentin walls of root canals [131,132,133]. C. albicans and E. faecalis colonization can lead to dental biofilms, inflammation, plaque formation, dental caries, periodontal disease, and other dangerous systemic infections by entering the blood, like rheumatoid arthritis, chronic kidney disease, and inflammatory bowel disease [131,132,133]. S. pyogenes isolated from dental plaque has the ability to result in throat and oral cavity infections, which can progress towards life-threatening illnesses like pneumonia, endocarditis, or encephalitis [133].
Plant-based bio-antimicrobials can be an alternative to failed classes of synthetic antimicrobials [16,17,18,19,20,21,22,23,34,35,36,70,71,72,73]. Wound and surgical-site infections can be potentially prevented through synergistic combinations of plant bio-compounds [16,17,18,19,20,21,22,23,34,35,36,39,40,41,42,43,44,45,46,47,48,69,70,71,72,73]. Adding iodine protected within the polymeric matrix PVP, a sustained-release reservoir, enhances inhibitory action towards opportunistic pathogens [34,35,36,125,126,127,128,129]. Such combinations can potentially reduce chronic inflammatory processes as well as pain, suffering, treatment costs, and duration [34,35,36,125,126,127,128,129]. Therefore, we investigated the morphology, composition, and antimicrobial properties of the title formulation AV-PVP-Thyme-I2. The inhibitory action of fresh and 18 months stored bio-material AV-PVP-Thyme-I2 was tested against a selection of 10 reference strains on sterile discs, surgical PGA sutures, cotton gauze bandages, surgical face masks, and KN95 masks.

2.1. Elemental Composition and Morphological Examination of AV-PVP-Thyme-I2

Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopic (EDS) analyses were performed to analyze the morphology and composition of AV-PVP-Thyme-I2, respectively (Figure 1).
AV-PVP-Thyme-I2 shows an interesting morphology consisting of amorphous round-shaped entities with a smooth surface and semi-crystalline, flaked structures covered with white cube-like or almost spherical spots or lines (Figure 1a and Supplementary File S1). The EDS reveals carbon (40%), oxygen (39%), and iodine (4%) (Figure 1b). Aluminum with 13% is a result of the sample preparation for the SEM, while chlorine (1.7%), potassium (1.6%), sodium (0.4%), and iron (0.3%) are from the thyme extract and the AV gel [90]. Au appears as well in the EDS because of the gold coating.
The formulation AV-PVP-Thyme-I2 (11 µg/mL) was impregnated on sterile surgical face masks, bandages, and braided polyglycolic acid (PGA) sutures to investigate the inhibitory action against a selection of 10 microorganisms. Figure 2 represents the SEM and EDS of dip-coated surgical PGA sutures.
Figure 2b and c shows the SEM of the braided surgical PGA suture coated with AV-PVP-Thyme-I2. These can be compared to our previous investigation showing the same, uncoated, plain PGA suture (Figure 2a) [34]. The coated suture has clear patches of semi-crystalline nature distributed all over. These patches are covering the braids of the suture homogenously. The EDS reveals again carbon (53%), oxygen (40%), iodine (2%), and chlorine (0.2%) (Figure 2d and Supplementary File S2). Cupper with 4% originates from the suture itself. The homogenously coated PGA sutures have a potential to be used in surgical operations to prevent surgical-site infections. Figure 3 depicts the SEM analysis of impregnated surgical facemasks (Supplementary File S3).
The medical face masks consisted of two layers. The white inner layer, which is directed towards the face, and the blue outer layer. The morphology of the two layers under the microscope differs from each other completely. The white layer shows a dense structure of entangled thin fibers (Figure 3a), while the blue outer layer shows a net-like structure with robustly ordered fibers next to each other (Figure 3c). Figure 3b,d shows semi-crystalline depositions of small, cube-like or spherical moieties on the surface of the face mask tissues. Figure 3c,d reveals a thin layer of coating on the tissue surface, while Figure 3b shows hives of title bio-material on the originally white, thin, entangled fibers. The thin, homogenous layer on the blue face mask tissues indicates successful adsorption. As a conclusion, the formulation AV-PVP-Thyme-I2 is homogenously distributed on the face mask tissues and does not compromise breathability or air movement (Figure 3a,b). Therefore, our impregnated face mask tissues could be used to mitigate viral load and inflammatory processes in the upper respiratory tract. However, further studies are needed to confirm the antiviral activity of our formulation, which will be part of our future investigations.
SEM and EDS analyses were performed on sterile bandages coated with the formulation AV-PVP-Thyme-I2 (Figure 4 and Supplementary File S4).
The cotton bandage is homogenously coated by the title biohybrid (Figure 4a,b). In Figure 4b, the same pattern of small-sized, almost spherical or cube-like patches is seen as previously confirmed in the face mask tissue in Figure 3d. Additionally, the whole surface is uniformly coated by these small circular or cube-like patches. Figure 4c depicts the EDS of the title formulation on the bandage. Carbon with 65.1% is followed by oxygen with 31.8, and finally iodine with 3.1%. Again, gold appears as a result of the gold coating. The homogenous deposition of AV-PVP-Thyme-I2 on the bandage is a good indicator for the potential use of our impregnated bandages as antimicrobial dressings.

2.2. Spectroscopical Characterization

2.2.1. Raman Spectroscopy

Figure 5 is the result of the Raman spectroscopic analysis of the title bio-material AV-PVP-Thyme-I2.
The Raman analysis of the title formulation AV-PVP-Thyme-I2 in Figure 5 confirms the presence of polyiodide moieties in accordance with our previous studies [29,30,34,35]. The adsorption band at 112 cm−1 indicates triiodide ions, which consist of purely symmetrical I3-units (Figure 5 and Table 1) [29,30,34,35,36,81,111,118,129].
The reason behind the absorption peak at 112 cm−1 are the symmetrical vibrations ν1s caused by symmetrical, “smart” triiodide ions (I-I-I), which usually are seen around 100–115 cm−1 (Figure 5 and Table 1) [29,30,34,35,36].
The weak, broad shifts at 141 and 145 cm−1 belong to unsymmetrical triiodide units made up of molecular I2 and iodide ions in the form of (I-I⋯I) as overtones (Figure 5 and Table 1) [29,34,35,36,111]. These are distorted, unsymmetrical, and nonlinear triiodide units (I-I⋯I) and are also confirmed by UV-spectral analysis in the next part of this investigation (Figure 5 and Table 1) [29,34,35,36]. The Raman spectrum does not indicate the presence of any other iodine moieties. The absence of strong absorption bands between 140 and 175 cm−1, as well as the missing absorption bands around 166 cm−1 confirms definitely the lack of pentaiodide ions within the title bio-material (Figure 5 and Table 1) [29,34,35,36]. The absence of other Raman shifts confirms the purity of AV-PVP-Thyme-I2.

2.2.2. UV-Vis Spectroscopy

Figure 6 depicts the UV-vis spectra of fresh AV-PVP-Thyme-I2 in comparison to AV-PVP-Thyme-I2 after 18 months of storage, AV-PVP-Thyme, PVP-I2, and pure Thyme macerated for 3 months.
The UV-vis spectral analysis reveals interesting information when the samples AV-PVP-Thyme, AV-PVP-Thyme-I2, AV-PVP-Thyme-I2 (after 18 months), pure Thyme macerated for 3 months, and PVP-I2 are compared (Figure 6a–c). As witnessed in our previous investigations, similar patterns of high-intensity, broad absorptions appear around 200–240, 250–320, and 325 to 420 nm in the iodinated samples (Figure 6) [29,34,35,36]. The absorptions of AV- and Thyme-bio-compounds, PVP, and iodine units overlap with each other and cause broad bands [29,34,35,36]. Thyme and AV-bio-compounds are clearly over-dominated by the stronger intensity absorptions of PVP and iodine moieties, which makes the spectral analysis challenging [29,34,35,36]. Therefore, additional UV spectra of pure Thyme extract, which was macerated in ethanol for 3 months, and its main bio-constituents thymol, and carvacrol were added to the investigation. The comparison with these and the previously studied AV-PVP-Sage-I2 allows better predictions on the composition of the title formulation since Sage contains thymol and carvacrol (Table 2) [34].
The formulation AV-PVP-Thyme-I2 shows in the UV-visible spectrum strong absorption bands related to I2 at 204 nm, I at 201 nm, and “smart” triiodide ions in the form of symmetrical, linear [I-I-I] units at 289 and nonlinear [I-I⋯I] moieties at 359 nm, in agreement with our previous studies (Figure 6 and Table 2) [24,25,26,27,28,29,30,32,33,34,35,36]. After storing the AV-PVP-Thyme-I2 for 18 months (blue curve), the UV-vis spectrum reveals almost similar absorptions without change. It is suggested that the triiodide absorption intensities, as well as their increased band broadness, indicate not only enhanced hydrogen bonding within the formulation but also a predominance of symmetrical [I-I-I] in comparison to asymmetrical triiodide [I-I⋯I] moieties. This assumption is supported by the Raman spectrum, which shows a strong absorption peak at 112 cm−1 for “smart” triiodides and a broad, weak absorption band at 141 and 145 cm−1 for asymmetric [I-I⋯I] units (Figure 5 and Table 1) [29,30,34,35,36]. The absence of pentaiodide ions in the title biohybrid is not only confirmed by the Raman spectrum but also in the UV-spectral analysis. The purple curve for PVP-I2 reveals a broad band around 444 nm as an indicator for I5 units, while it is lacking in AV-PVP-Thyme-I2 (red curve) and AV-PVP-Thyme-I2 (after 18 months, blue curve) (Figure 6 and Table 2).
Comparing the available UV spectra allows predictions about possible interactions within the different samples (Figure 6 and Table 2). The UV analysis of pure Thyme extract (orange curve), which was macerated for three months, reveals four broad absorption bands from 235 to 260, 265 to 290, 310 to 360, and 380 to 430 nm, ordered in descending absorbance intensity from weak to very weak (Figure 6c). These absorptions are a result of the bio-compounds within the Thyme extract, which are the known major components thymol and carvacrol, among several others [76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94]. Once AV-PVP is added (AV-PVP-Thyme, green curve), the intensities decrease vehemently due to a hypsochromic effect as a result of the higher number of hydrogen bonds with PVP. During this process, biocomponents within Thyme are encapsulated by PVP, leading to a decrease in their conjugated systems and chromophores (Figure 6 and Table 2).
Adding iodine increases the absorption of triiodide moieties highly (Figure 6, red curve). This curtails the follow-up of the Thyme- and AV-biocomponents whereabouts through overlap with the strong, broad, high-intensity bands of the triiodide units around 289 and 359 nm in the red curve. Further, increased absorption around 289 and 359 nm occurs after storing AV-PVP-Thyme-I2 for 18 months (blue curve) (Figure 6 and Table 2). The 18 months old title bio-formulation and its fresh counterpart demonstrate interesting behavior. The ongoing processes can be elucidated by comparing PVP-I2 (purple curve) with AV-PVP-Thyme-I2 (Figure 6 and Table 2).
UV-spectral analysis of PVP-I2 (purple curve) reveals iodide ions at 202 nm, molecular iodine at 205 nm, triiodide ions at 290 and 360 nm, and pentaiodide ions at 444 nm (Figure 6, purple curve) [29,30,34,35,36]. Once AV and Thyme are added to form AV-PVP-Thyme-I2 (red curve), the absorption pattern changes. The pentaiodide ions, which consist of actually (I2⋯I3), disappear in the red curve (Figure 6 and Table 2). Adding the plant extracts leads to destabilization and loss of pentaiodide ions:
[I2⋯I3] → [I2] + [I3]
Breaking apart into iodine molecules and triiodide ions. This alone should be a reason to record higher intensity absorptions of molecular iodine and triiodide anions in the red curve of the title bio-material. However, only higher intensity absorption of I3 is observed in AV-PVP-Thyme-I2, while I2 and even I absorption bands show reduced intensities. This can be explained by:
[I2] + [I] ⇆ [I3]
Iodine and iodide ions form more triiodide anions, hence again increasing the triiodide absorption intensities and at the same time decreasing their own. In this case, the concentration of molecular iodine should not decrease much because there was already a surplus in the sample. However, the redox reaction:
Oxidation: [-C-O] ⇆ [electron] + [-C=O]
Reduction: [I2] + [electron] ⇆ 2[I]
May explain how the surplus of molecular iodine is used up to produce iodide ions, which will in turn increase the triiodide concentration, according to Equation (2). The oxidation reaction in Equation (3) refers to the hydroxyl groups in the AV- and Thyme bio-compounds. Accordingly, -C=O vibrational absorption intensities increase after adding AV- and Thyme extracts to the FTIR analysis, confirming the assumption in Equation (3).
Initially, AV- and Thyme bio-constituents could compete against triiodides being complexed by PVP through hydrogen bonding. Suitable plant biocomponents may interfere and hydrogen bond instead of triiodide ions, leading to their release from PVP. This would hamper the antimicrobial properties of the title formulation. The results of the antimicrobial testing are remarkable and even show higher inhibitory action after a storage period of 18 months. In conclusion, the competition between AV- and Thyme bio-compounds in AV-PVP-Thyme-I2 does not scale down the inhibitory action in the fresh sample or after storing it for 18 months. PVP protects triiodide ions within AV-PVP-Thyme-I2 through hydrogen bonding and acts as a sustained-release reservoir by inhibiting I3 decomposition [34,35,36,128]. In contrast, this would have resulted in iodine release, decolorization of the formulation, and reduced antimicrobial properties after 18 months of storage. Instead, our results from the UV-spectral analysis and the antimicrobial testing confirm the absence of decolorization of the formulation; however, only a decrease in iodine and iodide ion concentrations and augmented antimicrobial properties were found.
Another interesting fact is related to the vibrational band absorptions of -C=O in PVP at 210, 218, and 221 (C=O) nm in the purple curve [34,35,36]. These shift to shorter wavelengths towards 208, 213, and 217 nm in combination with decreased absorption intensities in AV-PVP-Thyme-I2 (red curve), respectively (Figure 6a and Table 2). The blue shift with reduced absorption intensities implies more hydrogen bonding, encapsulation, and removal of conjugated systems by changing PVP-related C=O groups to C-O [34,35,36].
Thyme maceration extracts consist mainly of the phenolic monoterpenes thymol and carvacrol; the flavonoid luteolin; as well as the phenolic acids trans-rosmarinic acid, syringic acid, and gallic acid in descending order [90,91,92,93]. Keeping in mind the overlapping of the absorption peaks with the triiodide moieties, assigning all expected Thyme maceration extract components is not possible. Nevertheless, we compared our samples with the UV spectra of thymol and carvacrol in Table 2 Our formulations contain similar absorption peaks at 202, 204, 207, 210, 212, 277, and 415 nm, indicating the availability of thymol and carvacrol (Table 2). Trans-rosmarinic acid is confirmed by the peaks at 206, 250, and 330 nm, in accordance with previous investigations [90,91,92,93,94].
As a conclusion, AV- and Thyme polyphenols are not able to remove triiodide ions from PVP through hydrogen bonding completely. Triiodide ions are protected by PVP even after 18 months within the formulation without releasing them. The analytical results show no change in the composition, while the antimicrobial testing showed even higher inhibition by the 18 months older sample in comparison to the fresh AV-PVP-Thyme-I2. Therefore, the longer the sample is stored, the more triiodide ions are available and encapsulated by PVP within a sustained-release reservoir [34,35,36,128].

2.2.3. Fourier-Transform Infrared (FTIR) Spectroscopy

FTIR analysis of Thymol, PVP-I2, and AV-PVP-Thyme-I2 confirms the purity of the title formulation and its composition (Figure 7 and Supplementary File S2).
Figure 7 reveals similarities in the FTIR spectrum of AV-PVP-Thyme-I2 and PVP-I2, in comparison to our previous investigations [34,35,36]. The addition of AV and Thyme extract leads to a broadening of the bands between 3700 and 3500 cm−1 due to an increase in hydrogen bonding by the added AV- and Thyme-biocomponents through their hydroxyl- and carboxylic acid groups (Figure 7). The FTIR spectrum also shows higher absorption intensities between 3300 and 3100, 1850 and 1450 cm−1, and in the fingerprint region (Figure 7). The band related to asymmetric -C=O stretching vibrations at 1658 cm−1 in PVP-I2 (B, purple curve) is blue shifted towards 1653 cm−1 (A, red curve), with an additional broadening and increased absorption intensity in AV-PVP-Thyme-I2 (Figure 7 and Table 3) [34,35,36].
These findings indicate that adding AV- and Thyme bio-compounds increased hydrogen bonding with the carbonyl groups of the PVP in competition to the complexed polyiodide moieties. This process is enabled by the release of PVP-complexed pentaiodide ions and their subsequent decomposition into triiodide ions and iodine molecules, according to Equation (1). Additionally, increased absorption of the carbonyl stretching vibration confirms the availability of the newly added -C=O groups within the AV- and Thyme extracts originating from aloin, acemannan, and trans-rosmarinic acid originating from carboxylic -COO and -C(=O)OCH3 ester groups (Figure 7 and Table 3) [34,35,36,43,44,58,91,92]. At the same time, an AV-based –OH stretching vibration from aloin, emodin, galacturonic acid, and mannose is available in AV-PVP-Thyme-I2 at 3445 cm−1, in agreement with previous studies (Table 3) [34,35,36,44,45]. After adding AV and Thyme, the asymmetric and symmetric C-H stretching vibrations are red-shifted from 2947 to 2955 cm−1 and from 2862 to 2868 cm−1, respectively (Table 3) [34,35,36,44]. This finding confirms that incorporating AV and Thyme phenolic compounds like aloin, aloe emodin, rosmarinic acid, thymol, and carvacrol into the formulation increases the number of functional group conjugations and the solvent effect [34,35,36,43]. The same is witnessed in the region between 3260 and 3130 cm−1 with new, high-intensity absorption bands at 3445, 3383, 3215, and 3148 cm−1. These bands correspond to the hydroxyl and carboxylic groups of the bio-extracts Thyme and AV in AV-PVP-Thyme-I2 (Figure 7 and Table 3).
The low absorption band at 1753 cm−1 in both samples reveals the low degree of acetylation of the -C=O groups asymmetrical stretching vibration in PVP. These vibrations indiscriminately increase in intensity when AV- and Thyme extracts are added (Figure 7 and Table 3) [34,35,36]. The vibration of the -C=O group in the polymeric PVP matrix is assigned to the band at 1038 cm−1 in PVP-I2 (Figure 7 and Table 3). Once AV- and Thyme extracts are added, this band is seen with less intensity and blue shifted towards 1036 cm−1 (Figure 7 and Table 3). Reduced absorption intensity coupled with a small blue shift indicates higher complexation around the PVP-carbonyl group [34,35,36]. Another encapsulation process affects the bands of asymmetric stretching vibrations for -C-H groups and -CH2 twisting at 2990 and 880 cm−1, which show up with reduced intensities at 2990 and 881 cm−1 after adding AV- and Thyme-extracts, respectively [34,35,36].
In conclusion, incorporating AV- and Thyme extracts into PVP-I2 resulted in broadening and increased absorption intensities by their -C=C-, -C=O-, and -COOH- groups in the formulation. Hydrogen bonding increased with the PVP polymetric matrix, which releases pentaiodide ions as part of the process. The PVP backbone composed of [–CH-CH2-]n- groups is more coiled through encapsulation of triiodide ions and further AV- and Thyme bio-compounds [34,35,36]. The complexation of triiodide anions increases over time and results in a PVP polymeric matrix entangled or coiled around the triiodide moieties, acting as a protective, sustained-released reservoir around them [34,35,36,128]. The coiled or entangled structure is confirmed in the SEM images of the bandages and the face mask in the form of small, circular, or cube-like patches covering the surface of the tissues (Figure 3d and Figure 4b).

2.3. X-ray Diffraction (XRD)

The XRD analysis of AV-PVP-Thyme-I2 confirms the purity of the sample with peaks from AV, Thyme, PVP, and iodine (Figure 8).
The XRD analysis reveals almost the same peaks for AV-PVP-Thyme and AV-PVP-Thyme-I2. AV-PVP-Thyme-I2 reveals clearly lower intensities in the XRD pattern. The only peak with slightly higher intensity in the iodinated compound in relation to AV-PVP-Thyme is at 2θ = 30° (Figure 8). Previously, other investigators assigned 2Theta values around 24, 30, 37, and 46° to iodine, which confirms the composition of our title bio-material (Figure 8 and Table 4) [120,121].
The decrease in weak intensities after iodination indicates strong encapsulation of iodine into the PVP backbone in the form of triiodide anions. The only shifts in maxima occur at 2θ = 45.81° and 45.92° in AV-PVP-Thyme (green curve) towards 2θ = 45.84° and 45.95° after iodination (red curve), indicating higher complexation of polyiodide moieties into the formulation AV-PVP-Thyme-I2 (Figure 8 and Table 4) [81].
Additionally, the absence of new peaks in AV-PVP-Thyme-I2 points to an amorphization of iodine during this process, as witnessed before in our previous study of AV-PVP-Sage-I2 (Figure 8 and Table 4) [34].
Thymol appears in the XRD analysis at 2Theta values of around 14.92, 14.98, 24.43, 30.08, and 30.14°, in agreement with other investigations (Table 4) [34,35,81]. The peaks at 2θ = 14.89 and 23.37° are assigned according to previous studies to PVP (Table 4) [34,35]. Finally, AV-bio-compounds can be confirmed through the peaks around 2θ = 46, 50, and 63° (Table 4) [34,35,81].
The XRD analysis confirmed the purity of AV-PVP-Thyme-I2 (Figure 8 and Table 4).

2.4. Antimicrobial Activities of AV-PVP-Thyme-I2

The inhibitory action of the title bio-material AV-PVP-Thyme-I2 was tested by disc diffusion assay (DD) against 10 reference microorganisms on sterile discs at concentrations of 11, 5.5, and 2.75 µg/mL. We impregnated sterile, braided, surgical PGA sutures, cotton bandages, surgical face masks, and KN95 face masks with a concentration of 11 µg/mL. The reference microorganisms included the fungus C. albicans WDCM 00054 Vitroids, the Gram-positive bacteria S. pneumonia ATCC 49619, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, and B. subtilis WDCM0003, as well as the Gram-negative E. coli WDCM 00013 Vitroids, P. mirabilis ATCC 29906, P. aeruginosa WDCM 00026 Vitroids, and K. pneumonia WDCM00097 Vitroids. The negative controls were ethanol and water, which had no inhibitory effect. These are not included in Table 5.
The common antibiotics gentamycin (G) and nystatin (NY) were utilized as positive controls (Table 5). After storing the title formulation for 18 months, we performed DD tests again and obtained surprisingly augmented antimicrobial properties in comparison to the fresh AV-PVP-Thyme-I2. Storing the sample did not result in the decomposition of the triiodide ions. During this time, the triiodide ions were protected by the polymeric PVP matrix, which acted successfully as a sustained-release reservoir. Such complexation prevents the decomposition and subsequent loss of iodine molecules before confronting the cell membranes of microorganisms (Table 5) [128].
Table 5 is arranged from up to down in decreasing inhibitory action against the 10 reference microorganisms. Accordingly, the pathogens were susceptible in decreasing order towards C. albicans WDCM 00054, followed by the Gram-positive bacteria (S. aureus ATCC 25923, B. subtilis WDCM 00003, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, S. pneumoniae ATCC 49619), and lastly the Gram-negative pathogens (K. pneumoniae WDCM 00097, E. coli WDCM 00013, P. aeruginosa WDCM 00026, and P. mirabilis ATCC 29906) (Table 5). The DD tests revealed the highest ZOI for C. albicans WDCM 00054 and confirmed that AV-PVP-Thyme-I2 is a strong antifungal agent. Our bio-formulation encompasses even the control antibiotic nystatin (NY) almost fivefold, with 61 mm compared to 16 mm, respectively (Table 1). The remarkable ZOI of 61 mm in the 18 months old sample is clearly an indicator of enhanced antimicrobial properties compared to the 50 mm ZOI in the fresh AV-PVP-Thyme-I2 (Table 5). The DD studies against C. albicans WDCM 00054 resulted in ZOI = 50, 35, 30, and 15 for the concentrations of 11, 5.5, 2.75, and 1.38 µg/mL, respectively (Figure 9 and Table 5).
The disc diffusion studies showed the same general order of susceptibility to the pathogens in Table 5. We had the same trends for the formulation AV-PVP-Sage-I2 [34]. S. aureus ATCC 25923 shows intermediate inhibition zones of 18, 17, and 15 mm against the title compound and 20, 15, and 14 mm for AV-PVP-Sage-I2 (Figure 9b and Table 5) [34]. The Gram-negative K. pneumoniae WDCM 00097 is more susceptible with ZOI = 13, 12, and 10 mm than the other Gram-negative pathogens (Figure 9c and Table 5). The same happens in the formulation AV-PVP-Sage-I2 with 13 and 9 mm [34]. This trend is related to the motility of the pathogens. Accordingly, the most motile, swarming bacteria P. mirabilis ATCC 29906 is not inhibited by AV-PVP-Thyme-I2 in any of the tests except when impregnated into a KN95 mask (Table 5). The bio-formulation with Sage does not inhibit these motile bacteria as well. The only difference between the formulations AV-PVP-Thyme-I2 and AV-PVP-Sage-I2 is their inhibitory action towards P. aeruginosa WDCM 00026 (Table 5) [34]. The motile bacillus P. aeruginosa WDCM 00026 is resistant to AV-PVP-Sage-I2 [34]. The bio-hybrid AV-PVP-Thyme-I2 exerts intermediate inhibitory action against P. aeruginosa WDCM 00026 with ZOI = 11, 10, and 9 mm. Another difference is seen in the susceptibility of B. subtilis WDCM 00003 to both bio-formulations. The inhibition of B. subtilis WDCM 00003, a rod-shaped bacilli, is higher in the title formulation AV-PVP-Thyme-I2 compared to AV-PVP-Sage-I2 with ZOI = 19, 15, and 14 mm against Z = 13, 12, and 11 mm, respectively (Table 5) [34]. In general, the Thyme formulation has higher inhibitory action than the Sage [76,77,78,79]. This could be a result of the availability of the monoterpenes Thymol and Carvacrol within the title compound AV-PVP-Thyme-I2 [76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92]. These monoterpenes are known for their antimicrobial actions against many microorganisms [80,81,82,83,84,85,86,87,88,89,90,91,92].
As a conclusion, the bio-hybrid AV-PVP-Thyme-I2 is a strong antifungal agent against C. albicans WDCM 00054. The Gram-positive bacteria S. aureus ATCC 25923 is also inhibited strongly in comparison to the common antibiotic gentamycin, while B. subtilis WDCM 00003 and S. pyogenes ATCC 19615 are intermediately susceptible. These findings enable the potential use of our title bio-formulation as an antifungal and antibacterial coating, as well as a surface contact agent against the mentioned pathogens.
Surgical sutures are very important tools in surgery to close open wounds [32,34,36,69]. Especially biodegradable, braided PGA sutures are used in the medical field, including oral surgery [32,34,36,69]. Resistant pathogens and/or conditions favoring the proliferation of microorganisms can lead to surgical-site infections, which delay or impede the healing process [32,34,36,69]. Antimicrobial coatings may reduce the incidence of surgical-site infections, ameliorate wound closure, and ease patient suffering [32,34,36,69]. Therefore, we studied the inhibitory effects of dip-coated surgical PGA sutures (S) (Table 5). The highest susceptibility to the title biohybrid in surgical sutures is recorded for the Gram-positive bacteria E. faecalis ATCC 29212 (4 mm) (Table 5). C. albicans WDCM 00054, S. aureus ATCC 25923, and B. subtilis WDCM 00003 also show inhibition zones of 3 mm on surgical sutures (Figure 10 and Table 5).
Further inhibited Gram-positive bacteria include S. pyogenes ATCC 19615 (2 mm) and S. pneumoniae ATCC 49619 (1 mm) (Table 5). K. pneumoniae WDCM 00097 is the only susceptible Gram-negative pathogen on dip-coated surgical sutures with a ZOI of 2 mm (Table 5 and Figure 10c).
As a conclusion, surgical PGA sutures coated with our bio-formulation AV-PVP-Thyme-I2 may have potential as antimicrobial agents to prevent surgical-site infections against C. albicans WDCM 00054 and Gram-positive bacteria E. faecalis ATCC 29212, S. aureus ATCC 25923, and B. subtilis WDCM 00003.
Face masks were confirmed as essential tools in mitigating opportunistic pathogens during the COVID-19 pandemic [2,3,4,36]. They are pivotal as personal protective equipment to prevent the spread of microbes during normal flu or cold seasons in all public settings, including clinics, hospitals, elderly homes, emergency wards, and intensive care units [2,3,4,36]. The last COVID-19 outbreak was marked by an inability to provide the public with high-quality face masks globally [2,3,4,36]. Supply chains broke down, pharmacies and drug stores ran out of stocks, prices skyrocketed, while quality, safety, sustainability, and environmental concerns remained [2,4,36]. Low-income communities worldwide had no adequate access to face masks. Re-using face masks by spraying them with antimicrobial surface contact agents can mitigate microbial proliferation, reduce environmental pollution, increase accessibility, and increase sustainability.
We coated surgical face masks (M) and KN95 masks with our bio-hybrid AV-PVP-Thyme-I2 and studied the inhibitory action (Table 5.) The results reveal the same trends mentioned for discs, with the best results for C. albicans WDCM 00054, followed by strong inhibitory action against Gram-positive and intermediate susceptibility of Gram-negative bacteria (Table 5). C. albicans WDCM 00054 and the Gram-positive bacteria are highly susceptible against AV-PVP-Thyme-I2 coated on KN95 face masks, then the white surgical face mask layer (MW), and lastly the blue face mask layer (MB) (Table 5). The inhibitory action against C. albicans WDCM 00054 is ameliorated when AV-PVP-Thyme-I2 is impregnated on the KN95 mask (80 mm, Figure 11d), followed by the surgical facemask white layer (55 mm), and lastly the blue layer (45 mm) (Table 5 and Figure 11).
Among the Gram-positive reference strains, the antimicrobial action of AV-PVP-Thyme-I2 is strongest on KN95 against B. subtilis WDCM00003 with 40 mm, then S. aureus ATCC 25932 with 38 mm, S. pyogenes ATCC 19615 with 30 mm, E. faecalis ATCC 29212 with 28 mm, and lastly S. pneumoniae ATCC 49619 with 26 mm (Table 5 and Figure 11). The title formulation exerted strong inhibitory properties in comparison to the common antibiotics against Gram-negative bacteria, but with mixed results (Table 5). K. pneumoniae WDCM 00097 was more susceptible to the title bio-formulation on MB with 28 mm, followed by KN95 with 24 mm and MW with 21 mm (Table 5 and Figure 11). E. coli WDCM 00013 and P. aeruginosa WDCM 00026 showed both higher susceptibilities on MW with ZOI = 25 in comparison to MB and KN95 with 24/16 and 20/23 mm, respectively (Table 5).
As a conclusion, the bio-hybrid AV-PVP-Thyme-I2 exerts strong inhibitory action on KN95 face masks and surgical face masks against C. albicans WDCM 00054, the Gram-positive microorganisms B. subtilis WDCM 00003, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, and S. pneumoniae ATCC 49619. Gram-negative pathogens K. pneumoniae WDCM 00097, E. coli WDCM 00013, and P. aeruginosa WDCM 00026 were more susceptible to the surgical face masks. P. mirabilis ATCC 29906 is only inhibited when AV-PVP-Thyme-I2 is impregnated on KN95 masks. Antiviral tests were not performed and are planned to be investigated in future studies in our group.
Wound treatment needs a sophisticated approach to hasten the healing process successfully by preventing infection of the wound surroundings [15,36,39,40,42,46,48,52]. Impregnating cotton bandages with antimicrobial substances may mitigate the proliferation of harmful microorganisms on the wound and reduce treatment duration [15,39,40]. Therefore, we coated sterile cotton bandages (B) with our bio-formulation AV-PVP-Thyme-I2 and studied its action against our reference strains (Table 5). As expected, the same pattern of AV-PVP-Thyme-I2 antimicrobial action is exerted, with the highest antimicrobial action towards C. albicans WDCM 00054, followed by Gram-positive and Gram-negative pathogens (Table 5). C. albicans WDCM 00054 reveals the highest inhibition zone (53 mm) in comparison to all other reference strains and the common antibiotics (Table 5 and Figure 12).
The Gram-positive pathogens are also highly susceptible to impregnated bandages with a ZOI = 35, 32, 28, 24, and 23 mm against B. subtilis WDCM 00003, S. aureus ATCC 25932, S. pyogenes ATCC 19615, S. pneumoniae ATCC 49619, and E. faecalis ATCC 29212, respectively (Figure 12 and Table 5).
Even the Gram-negative bacteria showed high-to-intermediate inhibitory action. K. pneumoniae WDCM 00097 was highly susceptible with 28 mm ZOI, followed by E. coli WDCM 00013 with 23 mm and P. aeruginosa WDCM 00026 with 20 mm, respectively (Figure 12 and Table 5).
As a conclusion, cotton bandages enhance the antimicrobial properties of AV-PVP-Thyme-I2 against all the selected reference strains. The highest inhibition zones were recorded against C. albicans WDCM 00054, suggesting its use as an antifungal agent on bandage as well as on discs, face masks, and sutures. Our title bio-formulation has potential applications against Gram-negative and Gram-positive bacteria on face masks, bandages, discs, and sutures in descending order.
The general susceptibility pattern remains valid for all the tested carrier materials (suture, disc, bandage, surgical face mask, and KN95). The material, which allows a dense, homogenous coating by small, spherical, or cube-like patches of AV-PVP-Thyme-I2, seems to be the most suitable carrier, enhancing the antimicrobial properties. Table 5 is arranged in order of highest to lowest susceptibility, starting with C. albicans WDCM 00054, Gram-positive, and finally Gram-negative microorganisms. The arrangement of Gram-positive pathogens is ruled by different factors in accordance with our previous studies [34,35,36]. Morphology, size, properties, structure, and motility of the microorganisms are a function of their susceptibility to our bio-hybrid AV-PVP-Thyme-I2. The main reason is the iodine release from the sustained-released reservoir PVP, followed by the antimicrobial actions of the monoterpenes Thymol and Carvacrol (Figure 13).
These monoterpenes and AV components are complexed by PVP through hydrogen bonding. The analytical results suggest a firm PVP-I2 complex even after a storage period of 18 months and point at the availability of smart triiodides protected within the PVP-sustained reservoir over that long period.
Molecular iodine is a small, lipophilic molecule. This property enables its diffusion through the cell membranes of the studied microorganisms. Phenolic acids originating from the AV- and Thyme extract pass also through the cell membranes. Gram-positive pathogens, with their lipophilic peptidoglycan layers, accelerate diffusion and cell death. Gram-negative pathogens are affected less by molecular iodine and phenolic acids. Nevertheless, depending on the carrier (KN95, surgical face mask, and bandage), high inhibition zones are recorded. However, porin channels in Gram-negative bacteria allow hydrophilic triiodide ions and iodide ions, as well as small phenolic acid diffusion through the outer membranes. However, the porin channel diffusion is successful in KN95, surgical face masks, and bandages. Cell membrane diffusion remains the major mechanism ameliorating Gram-positive bacteria inhibition on KN95, surgical face masks, and bandages as well.
The morphology of the microorganisms characterizes their inhibition by the title bio-formulation AV-PVP-Thyme-I2. The susceptibility of the Gram-positive pathogens is highest in S. aureus ATCC 25932, which consists of clusters of non-motile cocci. The pattern continues with non-motile chains and pairs of cocci. Gram-negative bacteria inhibition is directly proportionate to their motility. The swarming bacteria P. mirabilis ATCC 29906 is only inhibited on KN95. Therefore, homogenously coated carriers with small, spherical, cube-like patches of AV-PVP-Thyme-I2 ensure even inhibition of motile Gram-negative bacteria.
In general, the results on discs, surgical PGA sutures, cotton gauze bandages, and face masks enable the potential use of the title bio-formulation AV-PVP-Thyme-I2 in many applications. AV-PVP-Thyme-I2 may be utilized to prevent inflammatory processes, to curb microbial proliferation, to reduce wound and surgical-site infections, to prevent airborne transmission of microbes, and as a surface killing agent (Figure 14).
The biohybrid can be potentially used in oral care products or dental treatment to facilitate the removal of colonizing oral pathogens like S. aureus, E. faecalis, S. pyogenes, E. coli, P. aeruginosa, and C. albicans. These opportunistic pathogens form biofilms in oral cavities surrounding teeth and gingiva and can even reach the dentin walls of root canals [131,132,133] (Figure 15).
C. albicans and E. faecalis colonize oral cavities and form dental biofilm in and around teeth (Figure 14). The biofilm leads progressively to inflammation, plaque formation, dental caries, periodontal disease, and other dangerous systemic infections like rheumatoid arthritis, chronic kidney disease, and inflammatory bowel disease [131,132,133]. Throat and oral cavity infections caused by S. pyogenes from dental plaque can lead to serious illnesses like pneumonia, endocarditis, or encephalitis [133]. Such colonizers could be stopped by using our bio-formulation as mouthwash or gargle due to its high inhibitory action on C. albicans and further oral pathogens (Table 5 and Figure 14). Future investigations should include cytotoxicity, cell culture, in vivo, and antiviral studies to verify the suitability of the mentioned applications.

3. Materials and Methods

3.1. Materials

We harvested the AV leaves in December from the botanical garden of the Ajman University campus in Ajman, UAE. Liofilchem Diagnostici (Roseto degli Abruzzi (TE), Italy) delivered the disposable sterilized Petri dishes with Mueller Hinton II agar, the McFarland standard sets, gentamicin (9125, 30 µg/disc), and nystatin (9078, 100 IU/disc). We bought from Sigma-Aldrich Chemical Co. (St. Louis, MO, USA) the reference strains E. coli WDCM 00013 Vitroids, K. pneumoniae WDCM 00097 Vitroids, P. aeruginosa WDCM 00026 Vitroids, Bacillus subtilis WDCM 0003 Vitroids, and C. albicans WDCM 00054 Vitroids. We obtained from Liofilchem (Roseto degli Abruzzi (TE), Italy) P. mirabilis ATCC 29906, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, and S. pneumoniae ATCC 49619. Sigma Aldrich (St. Louis, MO, USA) also provided us with Mueller Hinton Broth (MHB), Sabouraud Dextrose broth, pure ethanol, iodine (≥99.0%), and polyvinylpyrrolidone (PVP-K-30). Himedia (Jaitala Nagpur, Maharashtra, India) delivered sterile filter paper discs with a 6 mm diameter. Sterile polyglycolic acid (PGA) surgical sutures from DAMACRYL (USP: 3-0, Metric: 2, 19 mm, 75 cm, DC3K19) were provided by General Medical Disposable (GMD), GMD Group A.S., Istanbul, Turkey. We obtained sterile cotton gauze bandages and surgical, disposable, 3-ply non-woven face masks, as well as KN95 face masks, from our local pharmacy (FOMED, Qianjiang City, Hubei Province, China). All the utilized reagents were of analytical grade and used as delivered under sterile conditions. Absolute ethanol and ultrapure water were utilized in all experiments.

3.2. Preparation of Aloe Vera (AV) Extract and Thyme Extract

Fresh Thyme plants were purchased in August from a local store in Jordan. They were washed several times with distilled water to remove dust and soil, and then twice with absolute ethanol. The leaves were dried for 1 h at ambient temperature, and then 100 mg of a fresh Thyme plant consisting of leaves and stems was cut into pieces. These pieces were immediately transferred into a sterile, brown glass bottle with a screw cap. We added 100 mL of absolute ethanol, sealed the glass bottle, and stored it at ambient temperature in darkness for 3 months as part of a maceration. The macerate extract was then stored in a fridge at 3 °C under darkness for further use.
The leaves of the Aloe Vera (Aloe barbadensis Miller) plant were harvested during December from the botanical garden of Ajman University in the morning hours [34,35,36]. Within 10 min, the leaves with lengths of 35 to 50 cm were washed with water, then rinsed many times with distilled water, followed by absolute ethanol, then several times with ultrapure water, and finally left to dry for 1 h. After being dried, the AV leaves were cut with a sterile knife to be able to collect the mucilaginous gel in a sterile beaker. Then, the gel was transferred to a sterile mixer, mixed for 20 min until the gel was homogenized, and finally centrifuged at 4000 rpm for 40 min (3K 30; Sigma Laborzentrifugen GmbH, Osterode am Harz, Germany). The supernatant had a light-yellow color, was transferred immediately into a sterile brown bottle with a screw cap, and was stored in the fridge at 3 °C in darkness.

3.3. Preparation of AV-PVP-Thyme-I2

AV-PVP-Thyme-I2 is prepared by a simple one-pot synthesis. For this, 2 mL of pure AV gel is filled into a sterile beaker. Then, we added 2 mL of a freshly prepared solution of 1 g polyvinylpyrrolidone K-30 (PVP) in 10 mL of distilled water at ambient temperature under continuous stirring. In this mixture, we added 2 mL of Thyme extract while stirring at ambient temperature. Finally, 2 mL of freshly prepared iodine solution (0.05 g of iodine in 3 mL of absolute ethanol) was added at ambient temperature with continuous stirring. The formulation AV-PVP-Thyme-I2 was immediately placed into a sterile glass sample tube with a screw cap and stored in the fridge for further use at 3 °C in darkness. The formulation was kept for 18 months under these conditions and characterized in comparison to the fresh sample.

3.4. Characterization of AV-PVP-Thyme-I2

AV-PVP-Thyme-I2 was analyzed by SEM/EDS, Raman spectroscopy, UV-vis, FTIR, and X-ray diffraction (XRD) analyses. The analytical results verified the purity and the morphology of the formulation.

3.4.1. Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Ray Spectroscopy (EDX)

Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses were performed using VEGA3 from TESCAN (Brno, Czech Republic) at 15 kV. One drop of the formulation AV-PVP-Thyme-I2 was diluted with distilled water, placed on the carbon-coated copper grid, and dried. This sample was gold-coated using the Quorum Technology Mini Sputter Coater. The SEM analysis allowed a glimpse of the morphology, while the EDS analysis confirmed the purity of the title formulation.

3.4.2. UV-Vis Spectrophotometry (UV-Vis)

The biohybrid AV-PVP-Thyme-I2 was analyzed using a UV-Vis spectrophotometer model 2600i from Shimadzu (Kyoto, Japan) in the wavelength range of 195 to 800 nm.

3.4.3. Raman Spectroscopy

The formulation AV-PVP-Thyme-I2 was analyzed at ambient temperature on a RENISHAW (Gloucestershire, UK), equipped with an optical microscope. The sample was transferred into a cuvette (1 cm × 1 cm) and placed in front of the laser beam with an excitation of 785 nm. The beam was directed within a spot diameter of 2micron onto the sample by a 50× objective of a confocal microscope. A CCD-based monochromator collected the scattered light with a spectral range between 50 and 3400 cm−1 with a spectral resolution of −1 cm−1, output power of 0.5%, and integration time of 30 s.

3.4.4. Fourier-Transform Infrared Spectroscopy (FTIR)

The formulation AV-PVP-Thyme-I2 underwent a FTIR analysis in the range between 400 and 4000 cm−1 on an ATR IR spectrometer with a diamond window (Shimadzu, Kyoto, Japan). The liquid sample was diluted with absolute ethanol and analyzed by FTIR.

3.4.5. X-ray Diffraction (XRD)

AV-PVP-Thyme-I2 was analyzed using XRD from BRUKER (D8 Advance, Karlsruhe, Germany) by Cu radiation with a wavelength of 1.54060, coupled two theta/theta, time/step of 0.5 s, and a step size of 0.03.

3.5. Bacterial Strains and Culturing

The antimicrobial testing of AV-PVP-Thyme-I2 was performed against a selection of 10 reference microbial strains (C. albicans WDCM 00054 Vitroids, S. aureus ATCC 25923, S. pneumoniae ATCC 49619, E. faecalis ATCC 29212, S. pyogenes ATCC 19615, Bacillus subtilis WDCM 0003 Vitroids, K. pneumoniae WDCM 00097 Vitroids, E. coli WDCM 00013 Vitroids, P. aeruginosa WDCM 00026 Vitroids, and P. mirabilis ATCC 29906). These reference strains were stored first at −20 °C, then inoculated by adding fresh microbes to Mueller Hinton Broth (MHB) and kept in the fridge at 4 °C until needed.

3.6. Determination of Antimicrobial Activities of AV-PVP-Thyme-I2

AV-PVP-TCA-I2 was tested against a selection of 10 microbial strains (C. albicans WDCM 00054 Vitroids, S. aureus ATCC 25923, S. pneumoniae ATCC 49619, E. faecalis ATCC 29212, S. pyogenes ATCC 19615, Bacillus subtilis WDCM 0003 Vitroids, K. pneumoniae WDCM 00097 Vitroids, E. coli WDCM 00013 Vitroids, P. aeruginosa WDCM 00026 Vitroids, and P. mirabilis ATCC 29906). The positive controls were the common antibiotics gentamicin and nystatin (for C. albicans WDCM 00054 Vitroids only). Pure ethanol and ultrapure water were the negative controls and did not inhibit anything. All the tests were repeated three times, and the average was presented in this study. The formulation was impregnated and also tested on sterile discs, sterile PGA sutures, cotton gauze bandages, surgical facemasks, and KN95 masks against the same reference strains.

3.6.1. Procedure for Zone of Inhibition Plate Studies

We utilized the zone of inhibition plate method to study the susceptibility of the 10 reference microbial strains against AV-PVP-Thyme-I2 [134]. The selected bacterial reference strains were suspended in 10 mL of MHB and incubated for 2 to 4 h at a temperature of 37 °C. The fungus C. albicans WDCM 00054 was incubated at 30 °C in Sabouraud Dextrose broth. All microbial cultures were adjusted to the 0.5 McFarland standard. We used sterile cotton swabs to seed disposable, sterilized Petri dishes with MHA uniformly with 100 μL of microbial culture. After drying for 10 min the plates were ready for antimicrobial testing of AV-PVP-Thyme-I2.

3.6.2. Disc Diffusion Method (DD)

We followed the antimicrobial testing as per the recommendations of the Clinical and Laboratory Standards Institute (CLSI) [135]. Sterile filter paper discs were impregnated for 24 h by 2 mL of AV-PVP-Thyme-I2 at concentrations of 11 µg/mL, 5.5 µg/mL, 2.75, and 1.38 µg/mL. Then, these discs were dried for 24 h under ambient conditions. The antibiotic discs of gentamycin and nystatin were used as positive controls. A ruler was utilized to measure the diameter of the zone of inhibition (ZOI) to the nearest millimeter, which is the clear area around the disc. No clear inhibition zone means that the reference microbial strain was not inhibited.

3.7. Preparation and Analysis of Impregnated Sutures, Cotton Gauze Bandages, Surgical Face Masks, and KN95 Masks with AV-PVP-TCA-I2 (11 µg/mL)

The sterile, braided surgical PGA sutures with a length of 2.5 mL were impregnated for 24 h in a 50 mL solution of AV-PVP-Thyme-I2 at ambient temperature. The blue sutures became brown-blue and were then dried for 24 h under ambient conditions. The cotton gauze bandages, surgical face masks, and KN95 masks were cut with a sterile scissor into square pieces measuring 5 cm x 5 cm. These squares were impregnated in 50 mL of AV-PVP-Thyme-I2 for 24 h and dried for 24 h at ambient temperatures. All the impregnated materials were tested by disc diffusion methods against the same selection of 10 reference microbial strains.

3.8. Statistical Analysis

We used SPSS software (version 17.0, SPSS Inc., Chicago, IL, USA) for the statistical analysis and represented the data in mean values. The statistical significance between groups was calculated by a one-way ANOVA. Values of p < 0.05 were treated as statistically significant.

4. Conclusions

AMR is a continuous threat to health and quality of life. Pathogens evolve by using different mechanisms to outsmart attempts to curb their proliferation. Multi-drug-resistant ESKAPE microorganisms (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter spp., and Escherichia coli) cause globally increasing rates of morbidity and mortality. New approaches are pivotal because they are cost-effective, sustainable, and facile. Natural antimicrobial formulations consisting of synergistic medicinal plant extracts seem to offer alternatives to AMR. Plants developed defense systems based on their synergistically combined plethora of bio-compounds. As an alternative approach, we add molecular iodine to the mixture of biocomponents. Iodine is a known microbicide, and until now, there have been no known resistance mechanisms to iodine. Therefore, adding iodine enhances the antimicrobial activities of the plant bio-materials originating from AV and Thyme. Iodine must be complexed within PVP to prevent its untimely and fast release, mitigate its stability, and ensure its long-term use. Polymeric complexes of PVP and iodine are already used in many products with cosmeceutical, oral health, and pharmaceutical backgrounds, as well as being excellent antimicrobial agents. Our group used AV gel and Thyme extracts together within the sustained-release reservoir PVP-I2. Our formulation, AV-PVP-Thyme-I2, is confirmed to be a strong antifungal agent against C. albicans WDCM 00054 on sterile discs, sutures, cotton gauze bandages, surgical face masks, and KN95 face masks. Five Gram-positive microorganisms, including the notorious S. aureus ATCC 25923, were strongly susceptible to the title bio-formulation even at a low concentration of 11 µg/mL, especially on cotton gauze bandages and face masks. Three out of four Gram-negative pathogens, including reference strains of the dangerous ESKAPE pathogens K. pneumoniae WDCM 00097, P. aeruginosa WDCM 00026, and E. coli WDCM 00013, were strongly inhibited by the same low concentration of 11 µg/mL AV-PVP-Thyme-I2. P. mirabilis ATCC 29906 was only susceptible with a ZOI of 25 mm on KN95 masks. Face masks and cotton bandages allow homogenous coating by AV-PVP-Thyme-I2 with small, spherical, cube-like patches and guarantee the high susceptibility of the selected reference strains.
The microbicidal formulation AV-PVP-Thyme-I2 could be potentially applied in oral treatments and surgery because it inhibits the oral cavity-related opportunistic pathogens (S. aureus ATCC 25923, E. faecalis ATCC 29212, S. pyogenes ATCC 19615, E. coli WDCM 00013, P. aeruginosa WDCM 00026, and C. albicans WDCM 00054) colonizing oral cavities, which in the worst-case scenario lead to dangerous systemic infections. They also cause throat and oral cavity infections, resulting in potentially fatal illnesses like pneumonia and others. Further applications could be skin antiseptics or inanimate surface disinfectants against community- and hospital-acquired infections. Impregnated face masks with AV-PVP-Thyme-I2 strongly inhibited all 10 reference strains. This application could enable the re-use of face masks as a sustainable solution for the planet and low-income populations. The results on cotton gauze bandages encourage the use of AV-PVP-Thyme-I2 in wound dressing materials. Further investigations are needed to evaluate the in vivo biological activities.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/ijms25021133/s1.

Author Contributions

Conceptualization, Z.E., S.H.B. and I.H.B.; methodology, S.H.B. and H.A.S.; software, Z.E.; validation, Z.E., H.A.S. and S.H.B.; formal analysis, S.H.B. and H.A.S.; investigation, Z.E., S.H.B., H.A.S. and I.H.B.; resources, Z.E. and S.H.B.; data curation, Z.E. and H.A.S.; writing—original draft preparation, Z.E.; writing—review and editing, Z.E., S.H.B. and I.H.B.; visualization, Z.E. and I.H.B.; supervision, S.H.B. and Z.E.; project administration, S.H.B. and Z.E.; funding acquisition, Z.E. All authors have read and agreed to the published version of the manuscript.

Funding

This work was kindly supported by Ajman University, Deanship of Research and Graduate Studies, Ajman, United Arab Emirates, with the Internal Research Grant No. (Ref. No. # 2022-IRG-PH-3). The research findings presented in this article are solely the responsibility of the authors.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data is contained within the article and supplementary material.

Acknowledgments

We are extremely grateful to Sohaib Naseem Khan from Ajman University for the FTIR analysis and his professional, dedicated input during our investigations. We express our sincere gratitude to Hussain Alawadhi, Mohammad Shameer, Muhammed Irshad, and Fatima Mohammed Abla from Sharjah University for their dedication and support with SEM, XRD, Raman, and EDS analyses. We are thankful to Ibrahim Haj Bloukh from Ajman University, for his input during the investigations. We are grateful to the artist “@art_by_amie_” (Iman Haj Bloukh) for preparing digital art images as graphical abstract and figures.

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. Mahoney, A.R.; Safaee, M.M.; Wuest, W.M.; Furst, A.L. The silent pandemic: Emergent antibiotic resistances following the global response to SARS-CoV-2. iScience 2021, 24, 102304. [Google Scholar] [CrossRef]
  2. Bloukh, S.H.; Edis, Z.; Shaikh, A.A.; Pathan, H.M. A Look Behind the Scenes at COVID-19: National Strategies of Infection Control and Their Impact on Mortality. Int. J. Environ. Res. Public Health 2020, 17, 5616. [Google Scholar] [CrossRef]
  3. Barranco, R.; Vallega Bernucci Du Tremoul, L.; Ventura, F. Hospital-Acquired SARS-Cov-2 Infections in Patients: Inevitable Conditions or Medical Malpractice? Int. J. Environ. Res. Public Health 2021, 18, 489. [Google Scholar] [CrossRef]
  4. Ranney, M.L.; Valerie Griffeth, M.P.H.; Jha, A.K. Critical Supply Shortages—The Need for Ventilators and Personal Protective Equipment during the COVID-19 Pandemic. N. Engl. J. Med. 2020, 382, e41. [Google Scholar] [CrossRef] [PubMed]
  5. Romanescu, M.; Oprean, C.; Lombrea, A.; Badescu, B.; Teodor, A.; Constantin, G.D.; Andor, M.; Folescu, R.; Muntean, D.; Danciu, C.; et al. Current State of Knowledge Regarding WHO High Priority Pathogens—Resistance Mechanisms and Proposed Solutions through Candidates Such as Essential Oils: A Systematic Review. Int. J. Mol. Sci. 2023, 24, 9727. [Google Scholar] [CrossRef]
  6. Mulani, M.S.; Kamble, E.E.; Kumkar, S.N.; Tawre, M.S.; Pardesi, K.R. Emerging Strategies to Combat ESKAPE Pathogens in the Era of Antimicrobial Resistance: A Review. Front. Microbiol. 2019, 10, 539–563. [Google Scholar] [CrossRef] [PubMed]
  7. Uddin, T.M.; Chakraborty, A.J.; Khusro, A.; Zidan, B.R.M.; Mitra, S.; Bin Emran, T.; Dhama, K.; Ripon, K.H.; Gajdács, M.; Sahibzada, M.U.K.; et al. Antibiotic resistance in microbes: History, mechanisms, therapeutic strategies and future prospects. J. Infect. Public Health 2021, 14, 1750–1766. [Google Scholar] [CrossRef]
  8. Zhou, G.; Wang, Q.; Wang, Y.; Wen, X.; Peng, H.; Peng, R.; Shi, Q.; Xie, X.; Li, L. Outer Membrane Porins Contribute to Antimicrobial Resistance in Gram-Negative Bacteria. Microorganisms 2023, 11, 1690. [Google Scholar] [CrossRef]
  9. Rosas, N.C.; Lithgow, T. Targeting bacterial outer-membrane remodelling to impact antimicrobial drug resistance. Trends Microbiol. 2022, 30, 544–552. [Google Scholar] [CrossRef]
  10. Gao, Y.; Widmalm, G.; Im, W. Modeling and Simulation of Bacterial Outer Membranes with Lipopolysaccharides and Capsular Polysaccharides. J. Chem. Inf. Model. 2023, 63, 1592–1601. [Google Scholar] [CrossRef]
  11. Lam, W.W.-L.; Sun, K.; Zhang, H.; Au, S.W.-N. Crystal Structure of Flagellar Export Chaperone FliS in Complex with Flagellin and HP1076 of Helicobacter pylori. Front. Microbiol. 2020, 11, 787. [Google Scholar] [CrossRef] [PubMed]
  12. Carmo, A.; Rocha, M.; Pereirinha, P.; Tomé, R.; Costa, E. Antifungals: From Pharmacokinetics to Clinical Practice. Antibiotics 2023, 12, 884. [Google Scholar] [CrossRef]
  13. Yoo, Y.-J.; Kim, A.R.; Perinpanayagam, H.; Han, S.H.; Kum, K.-Y. Candida albicans Virulence Factors and Pathogenicity for Endodontic Infections. Microorganisms 2020, 8, 1300. [Google Scholar] [CrossRef]
  14. Baker, R.E.; Mahmud, A.S.; Miller, I.F.; Rajeev, M.; Rasambainarivo, F.; Rice, B.L.; Takahashi, S.; Tatem, A.J.; Wagner, C.E.; Wang, L.-F.; et al. Infectious disease in an era of global change. Nat. Rev. Microbiol. 2021, 20, 193–205. [Google Scholar] [CrossRef] [PubMed]
  15. Weigelt, M.A.; Lev-Tov, H.A.; Canic, M.T.; Lee, W.D.; Williams, R.; Strasfeld, D.; Kirsner, R.S.; Herman, I.M. Advanced Wound Diagnostics: Toward Transforming Wound Care into Precision Medicine. Adv. Wound Care 2022, 11, 330–359. [Google Scholar] [CrossRef]
  16. Bhatia, P.; Sharma, A.; George, A.J.; Anvitha, D.; Kumar, P.; Dwivedi, V.P.; Chandra, N.S. Antibacterial activity of medicinal plants against ESKAPE: An update. Heliyon 2021, 7, e06310. [Google Scholar] [CrossRef] [PubMed]
  17. Greff, B.; Sáhó, A.; Lakatos, E.; Varga, L. Biocontrol Activity of Aromatic and Medicinal Plants and Their Bioactive Components against Soil-Borne Pathogens. Plants 2023, 12, 706. [Google Scholar] [CrossRef]
  18. Félix, G.; Soto-Robles, C.A.; Nava, E.; Lugo-Medina, E. Principal Metabolites in Extracts of Different Plants Responsible for Antibacterial Effects. Chem. Res. Toxicol. 2021, 34, 1970–1983. [Google Scholar] [CrossRef]
  19. Fadiji, T.; Rashvand, M.; Daramola, M.O.; Iwarere, S.A. A Review on Antimicrobial Packaging for Extending the Shelf Life of Food. Processes 2023, 11, 590. [Google Scholar] [CrossRef]
  20. Anand, U.; Jacobo-Herrera, N.; Altemimi, A.; Lakhssassi, N. A Comprehensive Review on Medicinal Plants as Antimicrobial Therapeutics: Potential Avenues of Biocompatible Drug Discovery. Metabolites 2019, 9, 258. [Google Scholar] [CrossRef]
  21. Archana, H.; Bose, V.G. Evaluation of phytoconstituents from selected medicinal plants and its synergistic antimicrobial activity. Chemosphere 2022, 287, 132276. [Google Scholar] [CrossRef]
  22. Di Lorenzo, C.; Colombo, F.; Biella, S.; Stockley, C.; Restani, P. Polyphenols and Human Health: The Role of Bioavailability. Nutrients 2021, 13, 273. [Google Scholar] [CrossRef]
  23. Nguyen, D.D.; Lai, J.-Y. Synthesis, bioactive properties and biomedical applications of intrinsically therapeutic nanoparticles for disease treatment. Chem. Eng. J. 2022, 435, 134970. [Google Scholar] [CrossRef]
  24. Edis, Z.; Bloukh, S.H. Preparation and structural and spectroscopic characterization of a pentaiodide [Rb(12-crown-4)2]I5. Z. Nat. 2013, 68, 1340–1346. [Google Scholar]
  25. Edis, Z.; Bloukh, S.H. Preparation and structural and spectroscopic characterization of triiodides [M(12-crown-4)2]I3 with M = Na and Rb. Z. Nat. 2014, 69, 995–1002. [Google Scholar]
  26. Haj Bloukh, S.; Edis, Z. Structure and Antimicrobial properties of bis(1,4,7,10-tetraoxacyclododecane-κ4O,O′,O′′,O′′′)cesium pentaiodide, C16H32CsI5O8. Z. Kristallogr. NCS 2020, 235, 759–761. [Google Scholar] [CrossRef]
  27. Haj Bloukh, S.; Edis, Z. Halogen bonding in crystal structure of bis(1,4,7,10-tetraoxacyclododecane-κ4O,O′,O′′,O′′′)cesium triiodide, C16H32CsI3O8. Z. Kristallogr. NCS 2020, 235, 717–719. [Google Scholar] [CrossRef]
  28. Edis, Z.; Raheja, R.; Bloukh, S.H.; Bhandare, R.R.; Sara, H.A.; Reiss, G.J. Antimicrobial Hexaaquacopper(II) Complexes with Novel Polyiodide Chains. Polymers 2021, 13, 1005. [Google Scholar] [CrossRef]
  29. Edis, Z.; Bloukh, S.H. Antimicrobial V-Shaped Copper(II) Pentaiodide: Insights to Bonding Pattern and Susceptibility. Molecules 2022, 27, 6437. [Google Scholar] [CrossRef]
  30. Edis, Z.; Haj Bloukh, S.; Abu Sara, H.; Bhakhoa, H.; Rhyman, L.; Ramasami, P. “Smart” Triiodide Compounds: Does Halogen Bonding Influence Antimicrobial Activities? Pathogens 2019, 8, 182. [Google Scholar] [CrossRef]
  31. Reda, M.; Ashames, A.; Edis, Z.; Bloukh, S.; Bhandare, R.; Abu Sara, H. Green Synthesis of Potent Antimicrobial Silver Nanoparticles Using Different Plant Extracts and Their Mixtures. Processes 2019, 7, 510. [Google Scholar] [CrossRef]
  32. Edis, Z.; Bloukh, S.H.; Ibrahim, M.R.; Abu Sara, H. “Smart” Antimicrobial Nanocomplexes with Potential to Decrease Surgical Site Infections (SSI). Pharmaceutics 2020, 12, 361. [Google Scholar] [CrossRef]
  33. Bloukh, S.H.; Edis, Z.; Abu Sara, H.; Alhamaidah, M.A. Antimicrobial Properties of Lepidium sativum L. Facilitated Silver Nanoparticles. Pharmaceutics 2021, 13, 1352. [Google Scholar] [CrossRef]
  34. Edis, Z.; Bloukh, S.H. Facile Synthesis of Bio-Antimicrobials with “Smart” Triiodides. Molecules 2021, 26, 3553. [Google Scholar] [CrossRef]
  35. Edis, Z.; Bloukh, S.H. Facile Synthesis of Antimicrobial Aloe Vera-“Smart” Triiodide-PVP Biomaterials. Biomimetics 2020, 5, 45. [Google Scholar] [CrossRef]
  36. Edis, Z.; Bloukh, S.H.; Abu Sara, H.; Azelee, N.I.W. Antimicrobial Biomaterial on Sutures, Bandages and Face Masks with Potential for Infection Control. Polymers 2022, 14, 1932. [Google Scholar] [CrossRef]
  37. Sánchez, M.; González-Burgos, E.; Iglesias, I.; Gómez-Serranillos, M.P. Pharmacological Update Properties of Aloe Vera and its Major Active Constituents. Molecules 2020, 25, 1324. [Google Scholar] [CrossRef]
  38. Nalimu, F.; Oloro, J.; Kahwa, I.; Ogwang, P.E. Review on the phytochemistry and toxicological profiles of Aloe vera and Aloe ferox. Futur. J. Pharm. Sci. 2021, 7, 145. [Google Scholar] [CrossRef]
  39. Deng, S.; Chen, A.; Chen, W.; Lai, J.; Pei, Y.; Wen, J.; Yang, C.; Luo, J.; Zhang, J.; Lei, C.; et al. Fabrication of Biodegradable and Biocompatible Functional Polymers for Anti-Infection and Augmenting Wound Repair. Polymers 2023, 15, 120. [Google Scholar] [CrossRef]
  40. Ryall, C.; Duarah, S.; Chen, S.; Yu, H.; Wen, J. Advancements in Skin Delivery of Natural Bioactive Products for Wound Management: A Brief Review of Two Decades. Pharmaceutics 2022, 14, 1072. [Google Scholar] [CrossRef]
  41. Andrea, B.; Dumitrița, R.; Florina, C.; Francisc, D.; Anastasia, V.; Socaci, S.; Adela, P. Comparative analysis of some bioactive compounds in leaves of different Aloe species. BMC Chem. 2020, 14, 67. [Google Scholar] [CrossRef] [PubMed]
  42. Chelu, M.; Musuc, A.M.; Popa, M.; Moreno, J.C. Aloe vera-Based Hydrogels for Wound Healing: Properties and Therapeutic Effects. Gels 2023, 9, 539. [Google Scholar] [CrossRef]
  43. Chelu, M.; Popa, M.; Ozon, E.A.; Cusu, J.P.; Anastasescu, M.; Surdu, V.A.; Moreno, J.C.; Musuc, A.M. High-Content Aloe vera Based Hydrogels: Physicochemical and Pharmaceutical Properties. Polymers 2023, 15, 1312. [Google Scholar] [CrossRef]
  44. Chelu, M.; Musuc, A.M.; Aricov, L.; Ozon, E.A.; Iosageanu, A.; Stefan, L.M.; Prelipcean, A.-M.; Popa, M.; Moreno, J.C. Antibacterial Aloe vera Based Biocompatible Hydrogel for Use in Dermatological Applications. Int. J. Mol. Sci. 2023, 24, 3893. [Google Scholar] [CrossRef]
  45. Andonegi, M.; Irastorza, A.; Izeta, A.; de la Caba, K.; Guerrero, P. Physicochemical and Biological Performance of Aloe Vera-Incorporated Native Collagen Films. Pharmaceutics 2020, 12, 1173. [Google Scholar] [CrossRef]
  46. Alven, S.; Khwaza, V.; Oyedeji, O.O.; Aderibigbe, B.A. Polymer-Based Scaffolds Loaded with Aloe vera Extract for the Treatment of Wounds. Pharmaceutics 2021, 13, 961. [Google Scholar] [CrossRef]
  47. Khan, R.U.; Naz, S.; De Marzo, D.; Dimuccio, M.M.; Bozzo, G.; Tufarelli, V.; Losacco, C.; Ragni, M. Aloe vera: A Sustainable Green Alternative to Exclude Antibiotics in Modern Poultry Production. Antibiotics 2023, 12, 44. [Google Scholar] [CrossRef]
  48. Tummalapalli, M.; Berthet, M.; Verrier, B.; Deopura, B.; Alam, M.; Gupta, B. Composite wound dressings of pectin and gelatin with aloe vera and curcumin as bioactive agents. Int. J. Biol. Macromol. 2016, 82, 104–113. [Google Scholar] [CrossRef]
  49. Pattnaik, N.; Mohanty, R.; Satpathy, A.; Nayak, R.; Shamim, R.; Praharaj, A.K. Aloe vera mouthwashes can be a natural alternative to chemically formulated ones—A randomized-controlled trial. J. Taibah Univ. Med. Sci. 2022, 17, 424–432. [Google Scholar] [CrossRef]
  50. Kamath, D.G.; Nadimpalli, H.; Nayak, S.U.; Rajendran, V.; Natarajan, S. Comparison of antiplaque and anti-gingivitis effects of aloe vera mouthwash with chlorhexidine in fixed orthodontic patients—A randomized controlled trial. Int. J. Dent. Hyg. 2022, 21, 211–218. [Google Scholar] [CrossRef]
  51. Milia, E.P.; Sardellitti, L.; Eick, S. Antimicrobial Efficiency of Pistacia lentiscus L. Derivates against Oral Biofilm-Associated Diseases—A Narrative Review. Microorganisms 2023, 11, 1378. [Google Scholar] [CrossRef]
  52. Vajrabhaya, L.-O.; Korsuwannawong, S.; Ruangsawasdi, N.; Phruksaniyom, C.; Srichan, R. The efficiency of natural wound healing and bacterial biofilm inhibition of Aloe vera and Sodium Chloride toothpaste preparation. BMC Complement. Med. Ther. 2022, 22, 66. [Google Scholar] [CrossRef] [PubMed]
  53. Mondal, I.H.; Saha, J.; Rahman, A. Functional Applications of Aloe vera on Textiles: A Review. J. Polym. Environ. 2021, 29, 993–1009. [Google Scholar] [CrossRef]
  54. Aghamohamadi, N.; Sanjani, N.S.; Majidi, R.F.; Nasrollahi, S.A. Preparation and characterization of Aloe vera acetate and electrospinning fibers as promising antibacterial properties materials. Mater. Sci. Eng. C 2019, 94, 445–452. [Google Scholar] [CrossRef] [PubMed]
  55. Aziz, S.B.; Abdullah, O.G.; Hussein, S.A.; Ahmed, H.M. Effect of PVA Blending on Structural and Ion Transport Properties of CS:AgNt-Based Polymer Electrolyte Membrane. Polymers 2017, 9, 622. [Google Scholar] [CrossRef]
  56. Wang, Y.; Xu, J.; Li, X.; Peng, Y.; Xing, Y.; Wang, P.; Ran, R.; Zhang, T. Antibacterial performances of silk fabric finished by aloe anthraquinones. J. Text. Inst. 2022, 114, 1007–1015. [Google Scholar] [CrossRef]
  57. Mamatha, G.; Rajulu, A.V.; Madhukar, K. In Situ Generation of Bimetallic Nanoparticles in Cotton Fabric Using Aloe Vera Leaf Extract, as a Reducing Agent. J. Nat. Fibers 2020, 17, 1121–1129. [Google Scholar] [CrossRef]
  58. Liu, C.; Cui, Y.; Pi, F.; Cheng, Y.; Guo, Y.; Qian, H. Extraction, Purification, Structural Characteristics, Biological Activities and Pharmacological Applications of Acemannan, a Polysaccharide from Aloe vera: A Review. Molecules 2019, 24, 1554. [Google Scholar] [CrossRef]
  59. Donkor, A.-M.; Donkor, M.N.; Kuubabongnaa, N. Evaluation of anti-infective potencies of formulated aloin A ointment and aloin A isolated from Aloe barbadensis Miller. BMC Chem. 2020, 14, 8. [Google Scholar] [CrossRef]
  60. Xiang, H.; Cao, F.; Ming, D.; Zheng, Y.; Dong, X.; Zhong, X.; Mu, D.; Li, B.; Zhong, L.; Cao, J.; et al. Aloe-emodin inhibits Staphylococcus aureus biofilms and extracellular protein production at the initial adhesion stage of biofilm development. Appl. Microbiol. Biotechnol. 2017, 101, 6671–6681. [Google Scholar] [CrossRef]
  61. Kuntić, V.; Pejić, N.; Mićić, S. Direct spectrophotometric determination of hesperidin in pharmaceutical preparations. Acta Chim. Slov. 2012, 59, 436–441. [Google Scholar] [PubMed]
  62. Sadiq, U.; Gill, H.; Chandrapala, J. Temperature and pH Stability of Anthraquinones from Native Aloe vera Gel, Spray-Dried and Freeze-Dried Aloe vera Powders during Storage. Foods 2022, 11, 1613. [Google Scholar] [CrossRef]
  63. Sun, Z.; Yu, C.; Wang, W.; Yu, G.; Zhang, T.; Zhang, L.; Zhang, J.; Wei, K. Aloe Polysaccharides Inhibit Influenza A Virus Infection—A Promising Natural Anti-flu Drug. Front. Microbiol. 2018, 9, 2338. [Google Scholar] [CrossRef] [PubMed]
  64. Borges-Argáez, R.; Chan-Balan, R.; Cetina-Montejo, L.; Ayora-Talavera, G.; Sansores-Peraza, P.; Gómez-Carballo, J.; Cáceres-Farfán, M. In vitro evaluation of anthraquinones from Aloe vera (Aloe barbadensis Miller) roots and several derivatives against strains of influenza virus. Ind. Crop. Prod. 2019, 132, 468–475. [Google Scholar] [CrossRef] [PubMed]
  65. Goudarzi, M.; Fazeli, M.; Azad, M.; Seyedjavadi, S.S.; Mousavi, R. Aloe vera Gel: Effective Therapeutic Agent against Multidrug-Resistant Pseudomonas aeruginosa Isolates Recovered from Burn Wound Infections. Chemother. Res. Pract. 2015, 2015, 639806. [Google Scholar] [CrossRef] [PubMed]
  66. Nikolaou, C.N.; Chatziartemiou, A.; Tsiknia, M.; Karyda, A.G.; Ehaliotis, C.; Gasparatos, D. Calcium- and Magnesium-Enriched Organic Fertilizer and Plant Growth-Promoting Rhizobacteria Affect Soil Nutrient Availability, Plant Nutrient Uptake, and Secondary Metabolite Production in Aloe vera (Aloe barbadensis Miller) Grown under Field Conditions. Agronomy 2023, 13, 482. [Google Scholar] [CrossRef]
  67. Chen, X.; Daliri, E.B.-M.; Kim, N.; Kim, J.-R.; Yoo, D.; Oh, D.-H. Microbial Etiology and Prevention of Dental Caries: Exploiting Natural Products to Inhibit Cariogenic Biofilms. Pathogens 2020, 9, 569. [Google Scholar] [CrossRef]
  68. Figueiredo, L.C.; Figueiredo, N.F.; da Cruz, D.F.; Baccelli, G.T.; Sarachini, G.E.; Bueno, M.R.; Feres, M.; Bueno-Silva, B. Propolis, Aloe Vera, Green Tea, Cranberry, Calendula, Myrrha and Salvia Properties against Periodontal Microorganisms. Microorganisms 2022, 10, 2172. [Google Scholar] [CrossRef]
  69. Joseph, B.; George, A.; Gopi, S.; Kalarikkal, N.; Thomas, S. Polymer sutures for simultaneous wound healing and drug delivery—A review. Int. J. Pharm. 2017, 524, 454–466. [Google Scholar] [CrossRef]
  70. Fierascu, R.C.; Fierascu, I.; Baroi, A.M.; Ortan, A. Selected Aspects Related to Medicinal and Aromatic Plants as Alternative Sources of Bioactive Compounds. Int. J. Mol. Sci. 2021, 22, 1521. [Google Scholar] [CrossRef]
  71. Ecevit, K.; Barros, A.A.; Silva, J.M.; Reis, R.L. Preventing Microbial Infections with Natural Phenolic Compounds. Futur. Pharmacol. 2022, 2, 460–498. [Google Scholar] [CrossRef]
  72. Li, Y.-X.; Erhunmwunsee, F.; Liu, M.; Yang, K.; Zheng, W.; Tian, J. Antimicrobial mechanisms of spice essential oils and application in food industry. Food Chem. 2022, 382, 132312. [Google Scholar] [CrossRef] [PubMed]
  73. Castagliuolo, G.; Di Napoli, M.; Vaglica, A.; Badalamenti, N.; Antonini, D.; Varcamonti, M.; Bruno, M.; Zanfardino, A.; Bazan, G. Thymus richardii subsp. nitidus (Guss.) Jalas Essential Oil: An Ally against Oral Pathogens and Mouth Health. Molecules 2023, 28, 4803. [Google Scholar] [CrossRef]
  74. Vu, A.A.; Bose, S. Natural Antibiotic Oregano in Hydroxyapatite-Coated Titanium Reduces Osteoclastic Bone Resorption for Orthopedic and Dental Applications. ACS Appl. Mater. Interfaces 2020, 12, 52383–52392. [Google Scholar] [CrossRef] [PubMed]
  75. Chittratan, P.; Chalitangkoon, J.; Wongsariya, K.; Mathaweesansurn, A.; Detsri, E.; Monvisade, P. New Chitosan-Grafted Thymol Coated on Gold Nanoparticles for Control of Cariogenic Bacteria in the Oral Cavity. ACS Omega 2022, 7, 26582–26590. [Google Scholar] [CrossRef] [PubMed]
  76. Zielińska-Błajet, M.; Feder-Kubis, J. Monoterpenes and Their Derivatives—Recent Development in Biological and Medical Applications. Int. J. Mol. Sci. 2020, 21, 7078. [Google Scholar] [CrossRef]
  77. Duque-Soto, C.; Borrás-Linares, I.; Quirantes-Piné, R.; Falcó, I.; Sánchez, G.; Segura-Carretero, A.; Lozano-Sánchez, J. Potential Antioxidant and Antiviral Activities of Hydroethanolic Extracts of Selected Lamiaceae Species. Foods 2022, 11, 1862. [Google Scholar] [CrossRef]
  78. Çimen, C.G.; Dündar, M.A.; Kars, M.D.; Avcı, A. Enhancement of PCL/PLA Electrospun Nanocomposite Fibers Comprising Silver Nanoparticles Encapsulated with Thymus Vulgaris L. Molecules for Antibacterial and Anticancer Activities. ACS Biomater. Sci. Eng. 2022, 8, 3717–3732. [Google Scholar] [CrossRef]
  79. Soleimani, M.; Arzani, A.; Arzani, V.; Roberts, T.H. Phenolic compounds and antimicrobial properties of mint and thyme. J. Herb. Med. 2022, 36, 100604. [Google Scholar] [CrossRef]
  80. Escobar, A.; Pérez, M.; Romanelli, G.; Blustein, G. Thymol bioactivity: A review focusing on practical applications. Arab. J. Chem. 2020, 13, 9243–9269. [Google Scholar] [CrossRef]
  81. Sharma, K.; Munjal, M.; Sharma, R.K.; Sharma, M. Thymol encapsulated chitosan-Aloe vera films for antimicrobial infection. Int. J. Biol. Macromol. 2023, 235, 123897. [Google Scholar] [CrossRef] [PubMed]
  82. Lu, W.-C.; Chen, C.-Y.; Cho, C.-J.; Venkatesan, M.; Chiang, W.-H.; Yu, Y.-Y.; Lee, C.-H.; Lee, R.-H.; Rwei, S.-P.; Kuo, C.-C. Antibacterial Activity and Protection Efficiency of Polyvinyl Butyral Nanofibrous Membrane Containing Thymol Prepared through Vertical Electrospinning. Polymers 2021, 13, 1122. [Google Scholar] [CrossRef]
  83. Al-Nasiri, G.; Cran, M.J.; Smallridge, A.J.; Bigger, S.W. Optimisation of β-cyclodextrin inclusion complexes with natural an-timicrobial agents: Thymol, carvacrol and linalool. J. Microencapsul. 2018, 35, 26–35. [Google Scholar] [CrossRef] [PubMed]
  84. Memar, M.Y.; Raei, P.; Alizadeh, N.; Aghdam, M.A.; Kafil, H.S. Carvacrol and thymol: Strong antimicrobial agents against resistant isolates. Rev. Med. Microbiol. 2017, 28, 63–68. [Google Scholar] [CrossRef]
  85. Althunibat, O.Y.; Qaralleh, H.; Yassin, S.; Al-Dalin, A.; Abboud, M.; Khleifat, K.; Majali, I.S.; Aldal’in, H.K.H.; Rayyan, W.A.; Jaafraa, A. Effect of thymol and carvacrol, the major components of Thymus capitatus on the growth of Pseudomonas aeru-ginosa. Jr. Pure Appl. Microbiol. 2016, 10, 367–374. [Google Scholar]
  86. Wijesundara, N.M.; Lee, S.F.; Cheng, Z.; Davidson, R.; Rupasinghe, H.P.V. Carvacrol exhibits rapid bactericidal activity against Streptococcus pyogenes through cell membrane damage. Sci. Rep. 2021, 11, 1487. [Google Scholar] [CrossRef] [PubMed]
  87. Zhou, W.; Wang, Z.; Mo, H.; Zhao, Y.; Li, H.; Zhang, H.; Hu, L.; Zhou, X. Thymol Mediates Bactericidal Activity against Staphylococcus aureus by Targeting an Aldo–Keto Reductase and Consequent Depletion of NADPH. J. Agric. Food Chem. 2019, 67, 8382–8392. [Google Scholar] [CrossRef]
  88. Ramos, M.; Jiménez, A.; Peltzer, M.; Garrigós, M.C. Characterization and antimicrobial activity studies of polypropylene films with carvacrol and thymol for active packaging. J. Food Eng. 2012, 109, 513–519. [Google Scholar] [CrossRef]
  89. Vassiliou, E.; Awoleye, O.; Davis, A.; Mishra, S. Anti-Inflammatory and Antimicrobial Properties of Thyme Oil and Its Main Constituents. Int. J. Mol. Sci. 2023, 24, 6936. [Google Scholar] [CrossRef]
  90. Zemljič, L.F.; Plohl, O.; Vesel, A.; Luxbacher, T.; Potrč, S. Physicochemical Characterization of Packaging Foils Coated by Chitosan and Polyphenols Colloidal Formulations. Int. J. Mol. Sci. 2020, 21, 495. [Google Scholar] [CrossRef]
  91. Masek, A.; Cichosz, S.; Piotrowska, M. Comparison of Aging Resistance and Antimicrobial Properties of Ethylene–Norbornene Copolymer and Poly(Lactic Acid) Impregnated with Phytochemicals Embodied in Thyme (Thymus vulgaris) and Clove (Syzygium aromaticum). Int. J. Mol. Sci. 2021, 22, 13025. [Google Scholar] [CrossRef]
  92. Palmieri, S.; Pellegrini, M.; Ricci, A.; Compagnone, D.; Lo Sterzo, C. Chemical Composition and Antioxidant Activity of Thyme, Hemp and Coriander Extracts: A Comparison Study of Maceration, Soxhlet, UAE and RSLDE Techniques. Foods 2020, 9, 1221. [Google Scholar] [CrossRef]
  93. Razif, M.R.F.M.; Chan, S.Y.; Widodo, R.T.; Chew, Y.-L.; Hassan, M.; Hisham, S.A.; Rahman, S.A.; Ming, L.C.; Tan, C.S.; Lee, S.-K.; et al. Optimization of a Luteolin-Loaded TPGS/Poloxamer 407 Nanomicelle: The Effects of Copolymers, Hydration Temperature and Duration, and Freezing Temperature on Encapsulation Efficiency, Particle Size, and Solubility. Cancers 2023, 15, 3741. [Google Scholar] [CrossRef]
  94. Casal-Porras, I.; Muñoz, K.; Ortega, M.J.; Brun, F.G.; Zubía, E. Rosmarinic Acid and Flavonoids of the Seagrass Zostera noltei: New Aspects on Their Quantification and Their Correlation with Sunlight Exposure. Plants 2023, 12, 4078. [Google Scholar] [CrossRef]
  95. Mani, J.S.; Johnson, J.B.; Steel, J.C.; Broszczak, D.A.; Neilsen, P.M.; Walsh, K.B.; Naiker, M. Natural product-derived phytochemicals as potential agents against coronaviruses: A review. Virus Res. 2020, 284, 197989. [Google Scholar] [CrossRef] [PubMed]
  96. Tuñón-Molina, A.; Takayama, K.; Redwan, E.M.; Uversky, V.N.; Andrés, J.; Serrano-Aroca, A. Protective Face Masks: Current Status and Future Trends. ACS Appl. Mater. Interfaces 2021, 13, 56725–56751. [Google Scholar] [CrossRef]
  97. Ray, S.S.; Lee, H.K.; Huyen, D.T.T.; Chen, S.-S.; Kwon, Y.-N. Microplastics waste in environment: A perspective on recycling issues from PPE kits and face masks during the COVID-19 pandemic. Environ. Technol. Innov. 2022, 26, 102290. [Google Scholar] [CrossRef]
  98. Jung, S.; Yang, J.-Y.; Byeon, E.-Y.; Kim, D.-G.; Lee, D.-G.; Ryoo, S.; Lee, S.; Shin, C.-W.; Jang, H.W.; Kim, H.J.; et al. Copper-Coated Polypropylene Filter Face Mask with SARS-CoV-2 Antiviral Ability. Polymers 2021, 13, 1367. [Google Scholar] [CrossRef]
  99. Chowdhury, M.A.; Shuvho, B.A.; Shahid, A.; Haque, A.M.; Kashem, M.A.; Lam, S.S.; Ong, H.C.; Uddin, A.; Mofijur, M. Prospect of biobased antiviral face mask to limit the coronavirus outbreak. Environ. Res. 2020, 192, 110294. [Google Scholar] [CrossRef]
  100. Takayama, K.; Tuñón-Molina, A.; Cano-Vicent, A.; Muramoto, Y.; Noda, T.; Aparicio-Collado, J.L.; i Serra, R.S.; Martí, M.; Serrano-Aroca, A. Non-Woven Infection Prevention Fabrics Coated with Biobased Cranberry Extracts Inactivate Enveloped Viruses Such as SARS-CoV-2 and Multidrug-Resistant Bacteria. Int. J. Mol. Sci. 2021, 22, 12719. [Google Scholar] [CrossRef]
  101. Borojeni, I.A.; Gajewski, G.; Riahi, R.A. Application of Electrospun Nonwoven Fibers in Air Filters. Fibers 2022, 10, 15. [Google Scholar] [CrossRef]
  102. Zhong, Y.; Godwin, P.; Jin, Y.; Xiao, H. Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review. Adv. Ind. Eng. Polym. Res. 2020, 3, 27–35. [Google Scholar] [CrossRef]
  103. Kaiho, T. Iodine Chemistry and Applications, 1st ed.; Kaiho, T., Ed.; John Wiley & Sons, Inc.: Hoboken, NJ, USA, 2015; pp. 15–410. ISBN 78-1-118-46629-2. [Google Scholar]
  104. Moulay, S. Molecular iodine/polymer complexes. J. Polym. Eng. 2013, 33, 389–443. [Google Scholar] [CrossRef]
  105. Moulay, S. Macromolecule/Polymer-Iodine Complexes: An Update. Recent Innov. Chem. Eng. (Formerly Recent Patents Chem. Eng.) 2019, 12, 174–233. [Google Scholar] [CrossRef]
  106. Vasudevan, P.; Tandon, M. Antimicrobial properties of iodine based products. J. Sci. Ind. Res. 2010, 69, 376–383. [Google Scholar]
  107. Garcia-Sanchez, A.; Peña-Cardelles, J.-F.; Ruiz, S.; Robles, F.; Ordonez-Fernandez, E.; Salgado-Peralvo, A.-O.; Balloch, J.; Simon, J.C. Efficacy of Pre-Procedural Mouthwashes against SARS-CoV-2: A Systematic Review of Randomized Controlled Trials. J. Clin. Med. 2022, 11, 1692. [Google Scholar] [CrossRef]
  108. Viswanathan, K.; Babu, D.B.; Jayakumar, G.; Raj, G.D. Anti-microbial and skin wound dressing application of molecular iodine nanoparticles. Mater. Res. Express 2017, 4, 104003. [Google Scholar] [CrossRef]
  109. Blake, A.J.; Li, W.-S.; Lippolis, V.; Schröder, M.; Devillanova, F.A.; Gould, R.O.; Parsons, S.; Radek, C. Template self-assembly of polyiodide networks. Chem. Soc. Rev. 1998, 27, 195–206. [Google Scholar] [CrossRef]
  110. Savastano, M.; Bazzicalupi, C.; Gellini, C.; Bianchi, A. Genesis of Complex Polyiodide Networks: Insights on the Blue Box/I−/I2 Ternary System. Crystals 2020, 10, 387. [Google Scholar] [CrossRef]
  111. Savastano, M.; Bazzicalupi, C.; García, C.; Gellini, C.; de la Torre, M.D.L.; Mariani, P.; Pichierri, F.; Bianchi, A.; Melguizo, M. Iodide and triiodide anion complexes involving anion–π interactions with a tetrazine-based receptor. Dalton Trans. 2017, 46, 4518–4529. [Google Scholar] [CrossRef]
  112. Okuda, M.; Hiramatsu, T.; Yasuda, M.; Ishigaki, M.; Ozaki, Y.; Hayashi, M.; Tominaga, K.; Chatani, E. Theoretical Modeling of Electronic Structures of Polyiodide Species Included in α-Cyclodextrin. J. Phys. Chem. B 2020, 124, 4089–4096. [Google Scholar] [CrossRef] [PubMed]
  113. Van Megen, M.; Reiss, G.J. I62− Anion Composed of Two Asymmetric Triiodide Moieties: A Competition between Halogen and Hydrogen Bond. Inorganics 2013, 1, 3–13. [Google Scholar] [CrossRef]
  114. Wang, M.; Takahama, T.; Tashiro, K. Crystalline Iodine Complexes of Amorphous Poly(vinyl acetate) as Studied by X-ray Diffraction, Vibrational Spectroscopy, and Computer Simulation. Macromolecules 2020, 53, 4395–4406. [Google Scholar] [CrossRef]
  115. Tashiro, K.; Takahama, T.; Wang, M.F. X-ray study of Poly(vinyl Alcohol)-Iodine complex prepared from the dilute iodine solution as a hint to know the inner structure of polarizer. Polymer 2021, 233, 124180. [Google Scholar] [CrossRef]
  116. Schmitz, G.; Rosenblatt, L.; Salerno, N.; Odette, J.; Ren, R.; Emanuel, T.; Michalek, J.; Liu, Q.; Du, L.; Jahangir, K.; et al. Treatment data using a topical povidone-iodine antiseptic in patients with superficial skin abscesses. Data Brief 2019, 23, 103715. [Google Scholar] [CrossRef] [PubMed]
  117. Freeman, C.; Duan, E.; Kessler, J. Molecular iodine is not responsible for cytotoxicity in iodophors. J. Hosp. Infect. 2022, 122, 194–202. [Google Scholar] [CrossRef]
  118. Lundin, J.G.; McGann, C.L.; Weise, N.K.; Estrella, L.A.; Balow, R.B.; Streifel, B.C.; Wynne, J.H. Iodine binding and release from antimicrobial hemostatic polymer foams. React. Funct. Polym. 2018, 135, 44–51. [Google Scholar] [CrossRef]
  119. Shestimerova, T.A.; Mironov, A.V.; Bykov, M.A.; Grigorieva, A.V.; Wei, Z.; Dikarev, E.V.; Shevelkov, A.V. Assembling Polyiodides and Iodobismuthates Using a Template Effect of a Cyclic Diammonium Cation and Formation of a Low-Gap Hybrid Iodobismuthate with High Thermal Stability. Molecules 2020, 25, 2765. [Google Scholar] [CrossRef]
  120. Sai, M.; Zhong, S.; Tang, Y.; Ma, W.; Sun, Y.; Ding, D. Research on the preparation and antibacterial properties of 2-N-thiosemicarbazide-6-O-hydroxypropyl chitosan membranes with iodine. J. Appl. Polym. Sci. 2014, 131. [Google Scholar] [CrossRef]
  121. Zhang, Q.; Wu, Z.; Liu, F.; Liu, S.; Liu, J.; Wang, Y.; Yan, T. Encapsulating a high content of iodine into an active graphene substrate as a cathode material for high-rate lithium–iodine batteries. J. Mater. Chem. A 2017, 5, 15235–15242. [Google Scholar] [CrossRef]
  122. Yao, L.; Xu, P.; Gao, W.; Li, J.; Gao, L.; Niu, G.; Li, D.; Chen, S.; Tang, J. A chain-type diamine strategy towards strongly anisotropic triiodide of DMEDA·I6. Sci. China Mater. 2019, 63, 566–574. [Google Scholar] [CrossRef]
  123. Ordinartsev, A.A.; Lyssenko, K.A.; Petrov, A.V.; Goodilin, E.A.; Tarasov, A.B. Crystal structure of new formamidinium triiodide jointly refined by single-crystal XRD, Raman scattering spectroscopy and DFT assessment of hydrogen-bond network features. Acta Crystallogr. Sect. E Crystallogr. Commun. 2021, 77, 692–695. [Google Scholar] [CrossRef] [PubMed]
  124. Dattilo, S.; Spitaleri, F.; Aleo, D.; Saita, M.G.; Patti, A. Solid-State Preparation and Characterization of 2-Hydroxypropylcyclodextrins-Iodine Complexes as Stable Iodophors. Biomolecules 2023, 13, 474. [Google Scholar] [CrossRef]
  125. Gillam, T.; Goh, C.; Ninan, N.; Bilimoria, K.; Shirazi, H.; Saboohi, S.; Al-Bataineh, S.; Whittle, J.; Blencowe, A. Iodine complexed poly(vinyl pyrrolidone) plasma polymers as broad-spectrum antiseptic coatings. Appl. Surf. Sci. 2021, 537, 147866. [Google Scholar] [CrossRef]
  126. Bigliardi, P.L.; Alsagoff, S.A.L.; El-Kafrawi, H.Y.; Pyon, J.-K.; Wa, C.T.C.; Villa, M.A. Povidone iodine in wound healing: A review of current concepts and practices. Int. J. Surg. 2017, 44, 260–268. [Google Scholar] [CrossRef] [PubMed]
  127. Gao, T.; Fan, H.; Wang, X.; Gao, Y.; Liu, W.; Chen, W.; Dong, A.; Wang, Y.-J. Povidone–Iodine-Based Polymeric Nanoparticles for Antibacterial Applications. ACS Appl. Mater. Interfaces 2017, 9, 25738–25746. [Google Scholar] [CrossRef]
  128. Ma, J.; Zhang, Y.; Zhang, D.; Niu, X.; Lin, Z. Insights into the molecular interaction between poly(vinylpyrrolidone)-iodine disinfection system and polypropylene microplastics in aquatic environment. Chem. Eng. J. 2022, 430, 132276. [Google Scholar] [CrossRef]
  129. Xu, X.; Guan, Y. Investigating the Complexation and Release Behaviors of Iodine in Poly(vinylpyrrolidone)-Iodine Systems through Experimental and Computational Approaches. Ind. Eng. Chem. Res. 2020, 59, 22667–22676. [Google Scholar] [CrossRef]
  130. Cassini, A.; Högberg, L.D.; Plachouras, D.; Quattrocchi, A.; Hoxha, A.; Simonsen, G.S.; Colomb-Cotinat, M.; Kretzschmar, M.E.; Devleesschauwer, B.; Cecchini, M.; et al. Attributable deaths and disability-adjusted life-years caused by infections with antibiotic-resistant bacteria in the EU and the European Economic Area in 2015: A population-level modelling analysis. Lancet Infect. Dis. 2019, 19, 56–66. [Google Scholar] [CrossRef]
  131. Sobieszczański, J.; Mertowski, S.; Sarna-Boś, K.; Stachurski, P.; Grywalska, E.; Chałas, R. Root Canal Infection and Its Impact on the Oral Cavity Microenvironment in the Context of Immune System Disorders in Selected Diseases: A Narrative Review. J. Clin. Med. 2023, 12, 4102. [Google Scholar] [CrossRef]
  132. Saha, S.; Do, T.; Maycock, J.; Wood, S.; Boesch, C. Antibiofilm Efficacies of Flavonoid-Rich Sweet Orange Waste Extract against Dual-Species Biofilms. Pathogens 2023, 12, 657. [Google Scholar] [CrossRef]
  133. Butucel, E.; Balta, I.; Bundurus, I.A.; Popescu, C.A.; Iancu, T.; Venig, A.; Pet, I.; Stef, D.; McCleery, D.; Stef, L.; et al. Natural Antimicrobials Promote the Anti-Oxidative Inhibition of COX-2 Mediated Inflammatory Response in Primary Oral Cells In-fected with Staphylococcus aureus, Streptococcus pyogenes and Enterococcus faecalis. Antioxidants 2023, 12, 1017. [Google Scholar] [CrossRef]
  134. Bauer, A.W.; Perry, D.M.; Kirby, W.M.M. Single-disk antibiotic-sensitivity testing of staphylococci: An analysis of technique and results. AMA Arch. Intern. Med. 1959, 104, 208–216. [Google Scholar] [CrossRef] [PubMed]
  135. CLSI. Performance Standards for Antimicrobial Susceptibility Testing, 29th ed.; Clinical and Laboratory Standards Institute: Wayne, PA, USA, 2019; Volume 39. [Google Scholar]
Figure 1. Scanning electron microscopy (SEM) (a) and energy-dispersive spectroscopy (EDS) (b) of AV-PVP-Thyme-I2.
Figure 1. Scanning electron microscopy (SEM) (a) and energy-dispersive spectroscopy (EDS) (b) of AV-PVP-Thyme-I2.
Ijms 25 01133 g001
Figure 2. Scanning electron microscopy (SEM) of surgical sutures impregnated with AV-PVP-Thyme-I2: PGA suture at: (a) plain PGA suture [34], (b) 100 µm, and (c) 20 µm. (d) Energy-dispersive spectroscopy (EDS) of coated sutures.
Figure 2. Scanning electron microscopy (SEM) of surgical sutures impregnated with AV-PVP-Thyme-I2: PGA suture at: (a) plain PGA suture [34], (b) 100 µm, and (c) 20 µm. (d) Energy-dispersive spectroscopy (EDS) of coated sutures.
Ijms 25 01133 g002
Figure 3. Scanning electron microscopy (SEM) of surgical face masks dip-coated with AV-PVP-Thyme-I2: dense, white inner layer (a); general appearance at 100 µm; (b) detailed view at 2 µm; net, blue outer layer; (c) general structure at 30 µm; (d) detailed view at 2 µm.
Figure 3. Scanning electron microscopy (SEM) of surgical face masks dip-coated with AV-PVP-Thyme-I2: dense, white inner layer (a); general appearance at 100 µm; (b) detailed view at 2 µm; net, blue outer layer; (c) general structure at 30 µm; (d) detailed view at 2 µm.
Ijms 25 01133 g003
Figure 4. Scanning electron microscopy (SEM) of cotton surgical bandages impregnated with AV-PVP-Thyme-I2: bandage at: (a) 100 µm and (b) 2 µm. (c) Energy-dispersive spectroscopy (EDS) of coated bandages.
Figure 4. Scanning electron microscopy (SEM) of cotton surgical bandages impregnated with AV-PVP-Thyme-I2: bandage at: (a) 100 µm and (b) 2 µm. (c) Energy-dispersive spectroscopy (EDS) of coated bandages.
Ijms 25 01133 g004
Figure 5. Raman spectroscopic analysis of AV-PVP-Thyme-I2.
Figure 5. Raman spectroscopic analysis of AV-PVP-Thyme-I2.
Ijms 25 01133 g005
Figure 6. UV-vis analysis of AV-PVP-Thyme, AV-PVP-Thyme-I2, AV-PVP-Thyme-I2 (after 18 months), pure Thyme macerated for 3 months, and PVP-I2 (200–500 nm): UV-vis spectrum of AV-PVP-Thyme-I2 (a) in comparison to PVP-I2 with inlay, (b) in comparison to pure Thyme macerated for 3 months with inlay, and (c) between 200 and 450 nm only (AV-PVP-Thyme: green; AV-PVP-Thyme-I2: red; AV-PVP-Thyme-I2 after 18 months of storage: blue; PVP-I2: purple; and pure Thyme macerated for 3 months: orange).
Figure 6. UV-vis analysis of AV-PVP-Thyme, AV-PVP-Thyme-I2, AV-PVP-Thyme-I2 (after 18 months), pure Thyme macerated for 3 months, and PVP-I2 (200–500 nm): UV-vis spectrum of AV-PVP-Thyme-I2 (a) in comparison to PVP-I2 with inlay, (b) in comparison to pure Thyme macerated for 3 months with inlay, and (c) between 200 and 450 nm only (AV-PVP-Thyme: green; AV-PVP-Thyme-I2: red; AV-PVP-Thyme-I2 after 18 months of storage: blue; PVP-I2: purple; and pure Thyme macerated for 3 months: orange).
Ijms 25 01133 g006aIjms 25 01133 g006b
Figure 7. Fourier-transform infrared (FTIR) spectroscopic analysis of AV-PVP-Thyme-I2 (red) and PVP-I (purple).
Figure 7. Fourier-transform infrared (FTIR) spectroscopic analysis of AV-PVP-Thyme-I2 (red) and PVP-I (purple).
Ijms 25 01133 g007
Figure 8. X-ray diffraction (XRD) analysis of AV-PVP-Thyme-I2.
Figure 8. X-ray diffraction (XRD) analysis of AV-PVP-Thyme-I2.
Ijms 25 01133 g008
Figure 9. Disc diffusion assay of AV-PVP-Thyme-I2 (with concentrations of 11, 5.5, and 2.75 µg/mL) with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 against (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, and (c) K. pneumoniae WDCM 00097.
Figure 9. Disc diffusion assay of AV-PVP-Thyme-I2 (with concentrations of 11, 5.5, and 2.75 µg/mL) with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 against (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, and (c) K. pneumoniae WDCM 00097.
Ijms 25 01133 g009
Figure 10. Impregnated, sterile PGA sutures with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, and (c) K. pneumoniae WDCM 00097.
Figure 10. Impregnated, sterile PGA sutures with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, and (c) K. pneumoniae WDCM 00097.
Ijms 25 01133 g010
Figure 11. Impregnated sterile mask tissues with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against surgical face mask tissues blue and white (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, (c) K. pneumoniae WDCM 00097 and AV-PVP-Thyme-I2 (11 µg/mL) against KN95 and (d) C. albicans WDCM 00054, (e) S. aureus ATCC 25932, (f) P. aeruginosa WDCM 00026.
Figure 11. Impregnated sterile mask tissues with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against surgical face mask tissues blue and white (a) C. albicans WDCM 00054, (b) S. aureus ATCC 25932, (c) K. pneumoniae WDCM 00097 and AV-PVP-Thyme-I2 (11 µg/mL) against KN95 and (d) C. albicans WDCM 00054, (e) S. aureus ATCC 25932, (f) P. aeruginosa WDCM 00026.
Ijms 25 01133 g011
Figure 12. Impregnated sterile bandages with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against (a) C. albicans WDCM 00054, (b) B. subtilis WDCM 00003, and (c) E. coli WDCM 00013.
Figure 12. Impregnated sterile bandages with AV-PVP-Thyme-I2, with the positive control antibiotics nystatin (100 IU) and gentamicin (30 µg/disc). From left to right: AV-PVP-Thyme-I2 (11 µg/mL) against (a) C. albicans WDCM 00054, (b) B. subtilis WDCM 00003, and (c) E. coli WDCM 00013.
Ijms 25 01133 g012
Figure 13. PVP polymeric complex in AV-PVP-Thyme-I2.
Figure 13. PVP polymeric complex in AV-PVP-Thyme-I2.
Ijms 25 01133 g013
Figure 14. Potential applications of AV-PVP-Thyme-I2.
Figure 14. Potential applications of AV-PVP-Thyme-I2.
Ijms 25 01133 g014
Figure 15. Bacterial colonization in the oral cavity.
Figure 15. Bacterial colonization in the oral cavity.
Ijms 25 01133 g015
Table 1. Raman shifts in AV-PVP-Thyme-I2 (1) (cm−1).
Table 1. Raman shifts in AV-PVP-Thyme-I2 (1) (cm−1).
GroupAV-PVP-Thyme-I2[34][111][118][129]
I2
[I2⋯I]
sh,w 80 *m 85 *
s169 * νasm 160 * νas s 169νs
w189 * ν
I3 sh,w 61δdefsh 60 δdef
sh,w 70ν2bendsh,w 75ν2bend
[I-I-I]s 112ν1,svs 110ν1,ss 110ν1,s114ν1,svs 111νs
vw 222+1,svw 221 2ν1,s
I3w 141ν3,as
[I-I⋯I]w 145ν3,asm 144ν3,asm 144ν3,as144ν3,asm 145νs
vw 334+νassh,vw 154ν3,as
ν = vibrational stretching, s = symmetric, a = asymmetric, 1 = stretching mode 1, 3 = stretching mode 3, bend = bending, δdef = deformation. * belong to the same asymmetric, nonlinear unit I3 = I2⋯I. + overtones of triiodide ions. vw = very weak, br = broad, s = strong, vs = very strong, m = intermediate, sh = shoulder.
Table 2. UV-vis absorption signals in the samples AV-PVP-Thyme-I2 (1), AV-PVP-Thyme-I2 18 months old (2), AV-PVP-Thyme (3), PVP-I2 (4), pure Thyme macerated for 3 months (5), thymol (6), carvacrol (7), and AV-PVP-Sage-I2 [34] (nm).
Table 2. UV-vis absorption signals in the samples AV-PVP-Thyme-I2 (1), AV-PVP-Thyme-I2 18 months old (2), AV-PVP-Thyme (3), PVP-I2 (4), pure Thyme macerated for 3 months (5), thymol (6), carvacrol (7), and AV-PVP-Sage-I2 [34] (nm).
Group1234567[34]
I2204 vs206 sh 205 vs 206 vs
I3 as [I-I-I]289 s,br289 s,br 290 m,br 290 s,br
I3 as [I-I⋯I]359 s,br359 s,br 360 m,br 359 s,br
I5 444 w,br
I201 sh,vs201 s 202 sh 202 vs
AV/Aloin208 vs
230 sh
208 s
230 sh
207 vs
230 sh
206 vs
PVP208 vs208 s204–215 **207 vs 201–205 **
209 sh210 s 210 vs 209 vs
212 sh 211 br
213 s,sh214 sh214 sh215 sh 215 sh
217 sh 217 sh217 sh
220 sh 219 s,sh
221 s,sh
224 sh224 sh223 sh224 s
227 sh226 sh
233 w 231 sh
PVP-I2304 w,sh304 sh306304 sh 305 s,sh
Thyme/
Thymol/
Carvacrol/
Rosmarinic Acid
202–220 **202 s202 sh 202 vs203 s
204 vs204 s203 vs 204 s, sh205 s203 s
206 s206 s 206 s,sh 204 s
207 vs 207 vs 207 vs,sh207 s
209 vs,sh209 vs207 vs
210 vs,sh 210 vs
212 s 210 vs
216 sh 214 vs,sh216 s212 vs
219 sh 220 s215 vs
219 s
240 w 241 br,sh 223 m
250–320 **250–320 ** 250 br,w
277 **277 ** 280 br,vw277 m
330–440 **330–440 ** 327 br,vw 272 m283 **
415 br,vw415 br,vw415 br,vw 415 br,vw 340 m,sh
V-vis absorption signals with a concentration of 0.11 µg/mL. ** The broad bands overlap, and several peaks related to AV compounds, iodine moieties, and thymol/carvacrol cannot be observed. vw = very weak, br = broad, s = strong, vs = very strong, m = intermediate, sh = shoulder.
Table 3. FTIR analysis of AV-PVP-Thyme-I2 (A) and PVP-I2 (B) in solvent ethanol (cm−1).
Table 3. FTIR analysis of AV-PVP-Thyme-I2 (A) and PVP-I2 (B) in solvent ethanol (cm−1).
ν1,2 (O–H)s,a
ν (COOH)a
ν (C–H)aν (C-H)aν (C-H)sν (C=O)aδ (C-H)a
δ (CH2)
δ (O-H)
ν (C-C)ν (C-O)ν (C-O)
ν (C-N)
A3445 vs
3383 vs
3215 vs
3154 s
3148 s
3140 s
2990 vs2955 vs2868 vs1653 m
1753 vw
1456 s δ(CH3)s, in-plane
1420 s δ(CH3)a, in-plane
881 vs δ(CH2)twisting
804 s δ(C-H)out-of-plane
656 s δ(O-H)
1381 s
1326 s
1273 m1153 sh ν (C-N)
1099 vs ν (C-O)
1036 vs ν (C-O)
B3350 vs
3154 s
3140 s
2990 vs2947 vs2862 vs1658 m
1753 vw
1456 s δ(CH3)s, in-plane
1420 s δ(CH3)a, in-plane
880 vs δ(CH2)twisting
804 s δ(C-H)out-of-plane
656 s δ(O-H)
1381 s
1331 s
1273 m1153 sh ν (C-N)
1099 vs ν (C-O)
1038 vs ν (C-O)
ν = vibrational stretching, δ = deformation, s = symmetric, a = asymmetric; absorption intensity: vs = very strong, s = strong, m = medium, vw = very weak, sh = shoulder.
Table 4. XRD analysis of the samples AV-PVP-Thyme-I2 (1), AV-PVP-Thyme (2), AV-PVP-Sage-I2 [34], AV-PVP-I2 [35], and in previous reports (2Theta°).
Table 4. XRD analysis of the samples AV-PVP-Thyme-I2 (1), AV-PVP-Thyme (2), AV-PVP-Sage-I2 [34], AV-PVP-I2 [35], and in previous reports (2Theta°).
GroupAV-PVP-ThymeAV-PVP-Thyme-I2[35][34][120][121][81]
I2----25
29
36
24.5 s
25 s
28 s
37 w
38 w
43 w
-
46 m
PVP14.89 vs
24.37 m
14.89 s
24.37 w
10 s
19 s,br
13 s---
Thyme14.92 vs,br
14.98 s,br
14.92 s,br
14.98 m,br
-28 s,br--11.8 w
15.8 w
24.43 w24.43 vw 42 w,br 16.6 vs
30.08 s30.08 m 18.7 vs
30.14 w30.14 vw 20.3 m
20.8 m
24 w
25.4 s
AV45.81 w
45.92 vw
49.92 vw
62.54 vw
45.84 vw
45.95 vw
49.95 vw
62.57 vw
14 s
21 s,br
22 s,br
14 s--38.2 vs
44.4 m
64.9 w
w = weak, br = broad, s = strong, m = intermediate.
Table 5. Antimicrobial testing by disc dilution studies of antibiotics (A), AV-PVP-Thyme-I2 long-term stability study after 18 months (L1), AV-PVP-Thyme-I2 (1,2,3), suture (S), bandage (B), mask blue layer (MB), and mask white layer (MW). ZOI (mm) against microbial strains by diffusion assay.
Table 5. Antimicrobial testing by disc dilution studies of antibiotics (A), AV-PVP-Thyme-I2 long-term stability study after 18 months (L1), AV-PVP-Thyme-I2 (1,2,3), suture (S), bandage (B), mask blue layer (MB), and mask white layer (MW). ZOI (mm) against microbial strains by diffusion assay.
StrainAntibioticAL1 +1 +2 +3 +SBMBMWKN95
C. albicans WDCM 00054NY1661503530 *353455580
S. aureus ATCC 25923G2822181715332353038
B. subtilis WDCM 00003G2119151413335304040
S. pyogenes ATCC 19615G2516131211228212530
E. faecalis ATCC 29212G2515141211423232528
S. pneumoniae ATCC 49619G1815111110124202626
K. pneumoniae WDCM 00097G3014131210225282124
E. coli WDCM 00013G231411109023242520
P. aeruginosa WDCM 00026G2381098020162523
P. mirabilis ATCC 29906G300000000025
+ Disc diffusion studies (6 mm disc impregnated with 2 mL of 11 µg/mL (1), 2 mL of 5.5 µg/mL (2), and 2 mL of 2.75 µg/mL (3) of AV-PVP-Thyme-I2. A = G (gentamicin) (30 µg/disc). NY (nystatin) (100 IU). Suture (S), bandage (B), and mask (M) were impregnated with 2 mL of 11 µg/mL AV-PVP-Thyme-I2. The gray-shaded area represents Gram-negative bacteria. 0 = Resistant. * Further dilution to 1.38 µg/mL yielded a ZOI = 15 mm. There were no statistically significant differences (p > 0.05) between row-based values through Pearson correlation.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Edis, Z.; Bloukh, S.H.; Sara, H.A.; Bloukh, I.H. Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents. Int. J. Mol. Sci. 2024, 25, 1133. https://doi.org/10.3390/ijms25021133

AMA Style

Edis Z, Bloukh SH, Sara HA, Bloukh IH. Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents. International Journal of Molecular Sciences. 2024; 25(2):1133. https://doi.org/10.3390/ijms25021133

Chicago/Turabian Style

Edis, Zehra, Samir Haj Bloukh, Hamed Abu Sara, and Iman Haj Bloukh. 2024. "Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents" International Journal of Molecular Sciences 25, no. 2: 1133. https://doi.org/10.3390/ijms25021133

APA Style

Edis, Z., Bloukh, S. H., Sara, H. A., & Bloukh, I. H. (2024). Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents. International Journal of Molecular Sciences, 25(2), 1133. https://doi.org/10.3390/ijms25021133

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop