Next Article in Journal
Ion Sensors
Next Article in Special Issue
Electrochemical Immunosensor Based on Polythionine/Gold Nanoparticles for the Determination of Aflatoxin B1
Previous Article in Journal
Development of Light Powered Sensor Networks for Thermal Comfort Measurement
Previous Article in Special Issue
Sensors and Biosensors for the Determination of Small Molecule Biological Toxins
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Sensors
Volume 8
Issue 10
10.3390/s8106433
sensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Real-time Monitoring of Non-specific Toxicity Using a Saccharomyces cerevisiae Reporter System

by
Anna-Liisa Välimaa
1,*,
Anniina Kivistö
1,
Marko Virta
3 and
Matti Karp
1,2
1
Department of Chemistry and Bioengineering, Tampere University of Technology, P.O. Box 541, FI- 33101 Tampere, Finland
2
Biosensing Competence Centre (BCC), Tampere University of Technology, P.O. Box 541, FI- 33101 Tampere, Finland
3
Department of Applied Chemistry and Microbiology Division of Microbiology, P.O. Box 56, FI-00014, University of Helsinki, Finland
*
Author to whom correspondence should be addressed.
Sensors 2008, 8(10), 6433-6447; https://doi.org/10.3390/s8106433
Submission received: 31 August 2008 / Revised: 27 September 2008 / Accepted: 7 October 2008 / Published: 16 October 2008
(This article belongs to the Special Issue Toxin Sensors)
Browse Figures
Versions Notes

Abstract

:
Baker's yeast, Saccharomyces cerevisiae, is the simplest and most well-known representative of eukaryotic cells and thus a convenient model organism for evaluating toxic effects in human cells and tissues. Yeast cell sensors are easy to maintain with short generation times, which makes the analytical method of assessing antifungal toxicity cheap and less-time consuming. In this work, the toxicity of test compounds was assessed in bioassays based on bioluminescence inhibition and on traditional growth inhibition on agar plates. The model organism in both tests was a modified S. cerevisiae sensor strain that produces light when provided with D-luciferin in an insect luciferase reporter gene activity assay. The bioluminescence assay showed toxic effects for yeast cell sensor of 5,6-benzo-flavone, rapamycin, nystatin and cycloheximide at concentrations of nM to μM. In addition, arsenic compounds, cadmium chloride, copper sulfate and lead acetate were shown to be potent non-specific inhibitors of the reporter organism described here. The results from a yeast agar diffusion assay correlated with the bioluminescence assay results.

Graphical Abstract

1. Introduction

Since the amount of toxic chemicals present in our daily lives is huge and increasing, a sensitive, rapid, robust and cheap toxicity assay is needed for acute toxicity assessment in eukaryotic cells. The topic has been studied a lot and several biological toxicity tests have been developed. Microbial and biochemical tests for assessing chemical toxicity, especially in the aquatic environment, have been reviewed by Bitton [1]. Since that time the methods and several models including insect [2], fish [3], Daphnia magna [4] and tumor cell lines [5] have been generated for assessing toxicity of molecules to eukaryotic cells and tissues. None of these alone can answer the demands for a general model which is sensitive, economic and good in predicting the effects of toxic compounds against humans. Model organisms of different species typically have different sensitivities, which means that each biological test differs more or less from others and may not give universal results when assessing toxicity [6]. Additionally, with biological systems, evaluation of toxicity of fat soluble, highly hydrophobic compounds is difficult, since these compounds may be underestimated [7].
Among yeasts, the well-known baker's yeast, Saccharomyces cerevisiae, is an excellent organism for evaluating genetic functions of more complex eukaryotic organisms, including toxic effects on human cells and tissues [8]. Like most yeasts, S. cerevisiae is easy to cultivate and manipulate genetically [9] and furthermore, inexpensive and available in all grocery stores. On the other hand, even though mammalian cells share functional homologues with the yeasts, some chemicals assayed to be non-toxic for S. cerevisiae may be toxic to human cells and tissues. One example of such homologies is an inducible multidrug resistance ABC transporter Pdr5p, which is able to export a broad range of chemically distinct compounds [10]. Therefore, avoiding long assessment time (overnight incubation) will minimize the effects of non-specific inducible efflux pumps that may result in underestimation of acute toxicity.
Previously reported biological acute toxicity assays include bacterial agar plate techniques or assays measuring growth inhibition microscopically or spectrophotometrically [6]. On the other hand, yeast based assays for toxicity studies have been based on changes of culture respiration [6, 11-15], cell growth [16, 17], decreased fluorescence emission by green fluorescence protein (GFP) [18], bioavailability of copper and lead [19], or decrease in bioluminescence in the luciferase reporter gene assay [20]. Genetically modified yeast cells with human regulatory elements have been successfully used also in assessing estrogenicity [7, 21-25] and androgenicity of compounds [26] and detecting cell wall-disturbing agents [27].
In this study we introduce an alternative approach for the assessment of non-specific toxicity of several chemicals, even in real-time. Our toxicity assay is based on S. cerevisiae transformed with a modified firefly (Photinus pyralis) luciferase gene (luc) as a reporter for genetic response. The luc gene is inserted into the plasmid pRS316/GPD-PGK between the constitutive promoter GPD and PGK terminator. The plasmid produces light constitutively [21]. Firefly luciferase catalyses the following reaction: Luc + D-luciferin + ATP → oxyluciferin + AMP + CO2 + PPi + light. The resulting luminescence (yellowish light) can be measured very sensitively in real-time. In our assays, we use D-luciferin substrate at a pH of 5.0, because in the modified firefly luciferase the last three amino acids of the enzyme have been truncated. The natural peroxisomal targeting signal (Ser-Lys-Leu) [28] lacking from the C-terminus of the enzyme results in a cytoplasmic expression, which leads to high level of light emission. Under such conditions, where full length firefly luciferase is used [20] D-luciferin must traverse cytoplasmic and peroxisomal membranes to give light emission. This together with a D-luciferin substrate at a pH of 3.0 results in a low level of light emission [20]. We have previously shown that keeping the yeast cells at pH of 5.0 increases the light emission and the growth rate, providing more viable cells for toxicity measurement [29]. Furthermore, an assay can be done in a multi-well plate and the light emission produced by luciferase can be measured simply by adding D-luciferin substrate after an exposure of few hours or even in real-time. We show in this study that the acute toxicity of several model compounds representing completely different kinds of molecular families or structures against eukaryotic organisms can now be performed with light-emitting intact yeast cells on the contrary to Hollis et al. [20].

2. Results and Discussion

2.1 Bioluminescence assay

In this work, we estimated the toxicity of selected chemicals by exposing genetically modified yeast cells and measuring the luminescence produced in the presence of D-luciferin. In our study, the response to different chemicals varied a lot from activation to complete inhibition of light emission depending on the concentrations used. The toxicity of two compounds, 5,6-benzoflavone and rapamycin were monitored continuously in real-time. According to the results (Table 1), the chemicals tested can be divided into toxic or nontoxic for S. cerevisiae.

2.1.1 Antimicrobial agents

Evidently, 5,6-benzoflavone (Table 1) is the most potent among the chemicals tested and concidered as toxic for yeast cells. Additionally, a concentration of 750 nM caused total inhibition of bioluminescence throughout an exposure of 4 hours and at 7.5 nM the bioluminescence response, depending on the exposure time, varied between 41% (after 30 min exposure) of the response in blank to 65% of the response in blank (Figure 1a). The results are not unexpected, since 5,6-benzoflavone is known to be a strong inducer of certain enzymes belonging to the CYP 450 superfamily and has the same induction potency as the carcinogenic benzo(a)pyrene. For this reason 5,6-benzoflavone is widely used for studies in toxic effects in mammals mediated by aryl hydrocarbon receptor [30]. On the other hand as far as we know, no data in the literature on non-specific toxicity measured by a yeast-based bioassay is available for 5,6-benzoflavone.
We also obtained interesting results in an exposure of rapamycin (shown in Figure 1b as an example). It is clearly evident that the toxicity of 5,6-benzoflavone (Figure 1a) and rapamycin (Figure 1b) can be followed in real-time after the administration of the toxicant and the luciferase substrate D-luciferin. The emission is dose-dependent and the toxicity can be followed kinetically inside the thermostated measurement chamber of the multilabel reader.
The bioluminescence responses to nystatin (Figure 2) were different from the responses to other tested chemicals. Low concentrations of nystatin had no inhibitory effect on the yeast sensor cells; the light production was similar to that of the blank (100%). At a concentration of 0.54-1.08 μM, the bioluminescence response, depending on the exposure time, varied between 290% (an exposure of 5 hours) and 371% (an exposure of 2.5h), while a concentration of 5.40 μM caused total inhibition of bioluminescence and can be considered as toxic for the yeast sensor. After an exposure of 10 hours, the peak values at low concentrations of nystatin were not visible any more. This effect was seen repeatedly and was statistically significant in the control experiments. One explanation for this odd behaviour could be due to nonspesific, uncharacterized inhibition of metabolic pathways leaving more ATP to be used for the luciferase reaction. Thus, the phenomenom may be explained by mechanism of nystatin. This antifungal agent interacts with membrane sterols and damages cell membranes thus causing the leakage of intracellular K+ and increased permeability to protons [32]. Maybe excess of protons are used by vacuolar membrane H+-ATPases [33] to generate ATP which can be seen as a peak in a narrow concentration area. Similar high peak of ATP concentration has been observed in yeast cells during the lag growth phase, while in the logarithmic growth phase the amount of ATP remained constant being 2 μmol ATP/g yeast [34]. Another explanation would be minor increases in transcription of specific genes related to stress responses or modes of action as described for bacteria [35, 36]. The luminescence peak has also been characterized previously in bacterial reporter gene systems [37].
Sodium dodecyl sulfate (SDS) is an anionic detergent (surfactant) that is commonly used in household detergents and in various industrial and academic applications. In our studies, a concentration of 133.5 mM caused a 50% decrease in luminescence after a 2.5 h of exposure, while after a 5 h of exposure the same effect was seen at a concentration of 69.5 mM (Table 1). The increase in toxicity may be due to a prolonged exposure. SDS has more time to damage membrane structure and solubilizes proteins. [38].
Our results contradict those by Sirisattha et al. [38], where exposing yeast cells to 0.01% (34.7 mM) SDS for 2 h caused damages to membrane structure, altered carbon metabolism and induced oxidative stress in yeast cells. The difference could be partially attributed to different assay methods or experimental conditions. Our toxicity assay is based on S. cerevisiae transformed with a modified firefly luciferase gene as a reporter for genetic response. The bioluminescence produced by luciferase can be measured in intact living cells by adding the D-luciferin substrate after an exposure. In their studies, Sirisattha et al. used microarrays monitoring gene expressions. The yeast strain (also different from ours) was cultivated in a different medium and total RNA was extracted. Additionally, the incubation temperatures differed.
Interesting and unexpected results (Table 1) were also obtained by exposing the yeast sensor cells to cycloheximide (a protein synthesis inhibitor). An exposure of the yeast sensor cells to ths compound for 2.5 h had no toxic effects, while an exposure of 5 h was highly toxic. At the beginning of incubation, a MFS efflux pump can remove the drug from its cellular targets to vacuoles resulting in increased resistance [39], while under a prolonged exposure the vacuolar capacity is insufficient in preventing cycloheximide to concentrate in a cytosol. Additionally, beside the MFS efflux pump, cycloheximide resistance is induced by an efflux pump belonging to the ABC superfamily. Possibly, the latter efflux pump like Pdr5p is strongly expressed during the exponential growth phase, whereas during the stationary growth phase or limitations of important nutrients the expression level of the efflux pump rapidly decreases [40] thereby, making the yeast cells more susceptible to cycloheximide.
The results show that at least 1000-fold increase in toxicity with increasing exposure time was observed for cycloheximide (the highest concentration tested was 0.43 mM). Ten or more-fold increase in toxicity with increasing exposure time was observed for rapamycin, arsenic(V)oxide, sodium-m-arsenite and cadmium(II)chloride, whereas 5,6-benzoflavone, ketoconazole, nystatin, sodium azide and SDS showed no increase (Table 1, paragraph 2.2). An increase in sensitivity after a 5 hours exposure time may be due to changes during the growth phase of the sensor yeast. One of the most important changes concerning the drug resistance is probably the altered expression of multidrug efflux pumps or protein transporters belonging to the ABC transporters or members of the major facilitator superfamily (MFS) that can transfer a wide range of chemically dissimilar compounds with different affinity to the extracellular space thus conferring the pleiotropic (or multidrug) drug resistance (PDR) [41]. Some of these efflux pumps are plasma membrane proteins like the most studied Pdr5p. Moreover, a vacuolar membrane efflux pump such as the glutathione S-conjugate transporter that confers resistance to arsenite, cadmium and lead is known [42]. Efflux pumps are noticed to be activated in an early stage by external stress. For example, Pdr5p was induced only after a 4 minutes of exposure to benomyl [43] and was strongly expressed during the exponential growth phase, while during the stationary growth phase Pdr5p levels decreased rapidly. Additionally, Pdr5p needs glucose for functioning and the limitation of glucose or other important nutrients such as nitrogen reduces Pdr5p expression [40].

2.1.2 Heavy metals

Table 1 shows that even at the millimolar concentrations the heavy metals such as arsenic compounds, cadmium chloride and lead acetate had little if any non-specific toxicity to S. cerevisiae, although toxic effects were shown to increase slightly with increasing exposure time at the tested concentrations. These results were expected, as S. cerevisiae has been known to have mechanisms for detoxification and heavy metal resistance: efflux that is an active extrusion of the heavy-metal ion from the cell, accumulation into vacuoles as glutathione conjugates and reduction to a less toxic oxidation state [44]. To produce the resistance to arsenite, S. cerevisiae has two independent transport systems: a plasma membrane transporter and a vacuolar membrane transporter that belongs to the ABC transporter superfamily. Thus arsenite ions are extruded from a cytosol or accumulated into vacuoles as glutathione conjugates that require glutathione as a reductant [45]. Moreover, resistance to cadmium and lead is due to the same glutathione S-conjugate transporter [42].
In our experiment, trace elements, such as copper sulfate, zinc- and magnesium- chloride were little or non toxic to S. cerevisiae and zinc- and magnesium- chloride even increased the signal intensity and improved the health of the yeast cells at the tested concentrations. This was expected, because Cu and Zn are biologically essential trace elements and a component in a variety of enzymes and DNA-binding proteins [42].

2.2 Agar diffusion assay compared to bioluminescence assay

To compare and validate the results from the bioluminescence assay, a conventional agar diffusion assay (ADA) was performed. Toxicity of the selected chemicals was estimated by spotting the test sample in filter papers (Ø 6 mm) on the surface of the agar plates containing logarithmic grown yeast sensor strain and then measuring the growth inhibition zones after overnight incubation at 30 °C. The lowest chemical concentration at which an inhibition zone could be observed was defined as a value of minimal inhibitory concentration (MIC).
The results (Table 1 and Figure 3) showed correlation with the results from the bioluminescence assay. In general, the toxic chemicals showed toxicity in the ADA, whereas the ones predicted to be nontoxic had no toxic effects. Ketoconazole was an exception showing toxic effects to the yeast sensor strain in the ADA but having no significant response in the bioluminescence assay. To improve solubility ketoconazole was dissolved into acetate buffer (pH 3.6). However, better solubility does not necessarily mean increased bioavailability. Ketoconazole is an antifungal drug that contains imidazole and piperazine parts. For cellular uptake they both should be in a nonprotonated form which happens in a neutral environment [46]. Maximal uptake of ketoconazole by the human pathogenic yeast Candida albicans occurs between pH 6.5-7, while in an acidic environment ketoconazole penetrates into yeasts poorly. It has been suggested that even 200-fold increase in sensitivity towards Candida albicans has been reached as pH increases from 3 to 5 [47]. Thus, ketokonazole having no significant response in the bioluminescence assay could be partly explained by a low pH 3.6 of the solvent used. The other explanation might be an expression of PDR pumps induced by weak acid stress. During the normal yeast metabolism pH of as low as 3 (data not shown) is achieved because of acetate production. This weak acid stress induces certain PDR pump that extrudes acetate from yeast cells thereby preventing penetration of external acetate [41]. However, in the ADA the inhibitory effect of ketoconazole was observed. This could be attributed to longer incubation time (1-3 days) compared to the bioluminescence assay. The yeasts are in the late stationary phase, in which the expression level of efflux pumps decreases [40] thereby making the yeast cells more susceptible to ketoconazole.
Concerning the bioluminescence assay, sodium azide was highly toxic (Table 1), however, no visible growth was detected in the ADA throughout the plate containing the highest sodium azide concentration (Figure 3) and moreover, no clear inhibition zones in the plate containing more dilute sodium azide solutions (Figure 3) are visible. These observations indicate that sodium azide with molecular weight of 65.01 g/mol is such a small molecule that it is assumed to diffuse equally into agar, inhibiting growth totally. As we have shown here, a traditional toxicity assay on agar plates is not a convenient method in measuring toxicity of very small molecules in a yeast toxicity assessment.

3. Experimental Section

3.1 Chemicals

Zinc(II)chloride (ZnCl2), cadmium(II)chloride (CdCl2), lead(II)acetate [(CH3COO)2Pb], sodium azide (NaN3) and 30% hydrogen peroxide were from Merck & Co (Whitehouse Station, NJ, USA), sodium-m-arsenite (NaAsO2), nystatin (C47H75NO17), sodium dodecyl sulfate (SDS, C16H25OSO3Na) and 5,6-benzoflavone (B-NF, C2H6OS), dimethyl sulfoxide (DMSO), trisodium citrate, adenine hemisulfate salt, l-leucine, l-histidine and l-tryptophan from Sigma-Aldrich Co (St. Louis, MO, USA), Copper(I)sulfate (CuSO4) was from VWR International (West Chester, PA, USA), magnesium(II)chloride (MgCl2) from Mallinckrodt Baker (Phillipsburg, NJ, USA), arsenic(V)oxide (As2O2) and citric acid (Fluka) from Sigma-Aldrich Co (St Louis, MO, USA) and cycloheximide from MP Biomedicals (Aurora, OH, USA). Ethanol was from Altia Plc (Helsinki, Finland), antibiotic assay disks of diameter of 6 mm were from Schleicher & Schuell (Keene, NJ, USA). Yeast nitrogen base w/o amino acids and agar-agar (Difco) were purchased from Voigt Global Distribution (Lawrence, KS, USA) and D-Luciferin was supplied by Biothema AB (Handen, Sweden).

3.2 Sample preparation

Stock solution from each test chemical was prepared by dissolving the solid chemical into the following solvent: ketoconazole was dissolved into acetate buffer (pH 3.6) nystatin and B-NF into DMSO. Other chemicals were dissolved into sterile deionized water. Sample sets were prepared by diluting stock solutions in a ratio of 1:10 with the respective solvent. Rapamycin solutions were stored at -20°C and CdCl2, NaN3, As2O2, NaAsO2, cycloheximide, nystatin, ketoconazole and B-NF solutions were stored at +4°C. Other samples were preserved at room temperature and protected from light.

3.3 Yeast strain cultivation

The yeast strain used in this study was S. cerevisiae transformed with a modified firefly (Photinus pyralis) luciferase gene (luc) inserted in the plasmid as a reporter for genetic response, BMA64-1A+pRS316luc [29]. The insertion into this plasmid facilitates the incorporation of the reporter gene into the chromosome of S. cerevisiae. Firefly luciferase catalyses the following reaction: Luc + D-luciferin +ATP → oxyluciferin + AMP + CO2 +PPi + light. The resulting luminescence (yellowish light) can be measured very sensitively and in our assay simply by adding D-luciferin substrate after an exposure of few hours or even in real-time. We use the D-luciferin substrate at pH of 5.0, because in the modified firefly luciferase the last three amino acids of the enzyme have been truncated. The natural peroxisomal targeting signal (Ser-Lys-Leu) [28] lacking from C-terminus of the enzyme results in cytoplasmic expression, which leads to high levels of light emission.
For both bioluminescence and conventional agar diffusion assay, S. cerevisiae was cultivated overnight at 30°C and 300rpm shaking in liquid synthetic dextrose medium (SD) that contains yeast nitrogen base w/o amino acids (6.7 g/L) and D-glucose 40 mL/L of a 40% (w/v) supplemented with adenine (5 g/L) and the essential amino acids l-histidine (2 g/L), l-leucine (10 g/L) and l-tryptophan (2 g/L). Yeast nitrogen base w/o amino acids and D-glucose were autoclaved (121°/15 min) and adenine and amino acids were filter sterilized (pore size 0.2 μM). pH of the SD medium was checked time to time and pH was 4.8±0.2. For the bioluminescence assay, the yeast cells were grown to an optical density (OD600) of about 3.0 and after that the culture was diluted with the same medium to OD600 of 0.8 and right after were used in the assay. For agar diffusion assay, the same medium described above was solidified with agar-agar.

3.4 Assay procedures

3.4.1 Bioluminescence assay

Ten or 1 μL aliquots of the sample sets and reference samples (blank solvent) were pipetted in triplicate into a white 96-well plate (Thermo Electron Corporation, Finland) with hydrogen peroxide (0.3% or 3%, depending on the test) as a positive control. Ninety or 100 μL aliquots of the diluted yeast culture were then added into the wells containing samples. In the wells, the final amount of water or acetate buffer was 10 % and DMSO 1%.
Plates were then incubated at 30°C and 300 rpm for 2.5 h or 5 h. After the incubation, 100 μL aliquots of 1 mM D-luciferin (in 0.1 M Na-citrate buffer pH 5) were pipetted into the wells and the bioluminescence was immediately measured with a Chameleon Multilabel Detection Platform (Hidex Oy, Turku, Finland). Furthermore, for real-time monitoring, 5,6-benzoflavone and rapamycin were measured continuosly (Figure 1) and light emission level of the blank, expressed as relative light units (RLU) was set as 100%. The IC50 of all tested chemicals was calculated. Because the bioluminescence response curves of nystatin were different from the curves of other tested chemicals, an exposure time of 10 hours was used to see if the same phenomenon could be seen under a prolonged incubation time.

3.4.2 Agar diffusion assay

To compare and validate the results from the bioluminescence assay, a conventional agar diffusion assay (ADA) was performed. Aliquots of test sample (five dilutions) and reference solutions were pipetted onto filter papers (Ø 6 mm) which were then spotted on the surface of the SD –agar plates containing the logarithmic overnight grown yeast sensor strain. After overnight incubation at 30 °C, the growth inhibition zones were measured. The lowest chemical concentration at which an inhibition zone could be observed was defined as a value of minimal inhibitory concentration (MIC).

4. Conclusions

The goal of this study was to show that our toxicity assay based on a representative of eukaryotic cells S. cerevisiae transformed with a modified firefly (Photinus pyralis) luciferase gene (luc) inserted in the plasmid as a reporter is an alternative method in screening non-specific toxicity of several chemicals in real-time. The toxicity of the test compounds was assessed in the bioassays based on bioluminescence inhibition. The traditional growth inhibition on an agar plate was performed to compare and validate the results from the bioluminescence assay.
It naturally needs to be emphasized that when toxicity testing is concerned, all systems have their advantages and disadvantages. Even though the results from the agar diffusion assay (ADA) correlated with the results from the bioluminescence assay, the ADA has many disadvantages. Making plates for each concentrations and each chemical is time-consuming, and the results can be read only after 1-3 days, whereas in the bioluminescence assay different concentrations of different chemicals can be performed in a multi-well plate and the luciferase activity can be measured from intact living yeast cells even in real-time just by adding D-luciferin. Furthermore, since the ADA reveals only a level of the toxicity, the bioluminescence assay can give some ideas about the character of the toxicity like during 5,6-benzoflavone, rapamycin and nystatin monitoring. Thus, because of the advantages mentioned above and due to the fact that S. cerevisiae is easy to cultivate in a pour medium with short generation time, the bioluminescence assay could be a fast and inexpensive tool suitable for toxicity assessments.

Acknowledgments

We are grateful to Dr. Raghida Lepistö, Tampere University of Technology, for helpful comments and suggestions on the manuscript. We are also thankful to Ms. Katariina Tolvanen for configuration the figures and Mr. Sakari Halttunen for assisting in calculations. Furthermore, we are thankful to Jaana Kantola, Galilaeus Inc., for providing us with rapamycin. The Raisio Elintarvikkeiden Tutkimussäätiö is acknowledged for their financial support (Välimaa).

References and Notes

  1. Bitton, G. Bacterial and biochemical tests for assessing chemical toxicity in the aquatic environment: A review. CRC Crit. Rev. Environ Control 1983, 13, 51–67. [Google Scholar]
  2. Nascarella, M.A.; Stoffolano, J.G., Jr.; Stanek, E.J., III; Kostecki, P.T.; Calabrese, E.J. Hormesis and stage specific toxicity induced by cadmium in an insect model, the queen blowfly, Phormia regina Meig. Environ. Pollut. 2003, 124, 257–262. [Google Scholar]
  3. Pichardo, S.; Jos, A.; Zurita, J.L.; Salguero, M.; Cameán, A.M.; Repetto, G. Acute and subacute toxic effects produced by microcystin-YR on the fish cell lines RTG-2 and PLHC-1. Toxicol. in Vitro 2007, 21, 1460–1467. [Google Scholar]
  4. Zurita, J.L.; Jos, A.; del Peso, A.; Salguero, M.; Cameán, A.M.; López-Artíguez; Repetto, G. Toxicological assessment of indium nitrate on aquatic organisms and investigation of the effects on the PLHC-1 fish cell line. Sci. Total Environ. 2007, 387, 155–165. [Google Scholar]
  5. Cheung, R.Y.; Rauth, A.M.; Ronaldson, P.T.; Bendayan, R.; Wu, X.Y. In vitro toxicity to breast cancer cells of microsphere-delivered mitomycin C and its combination with doxorubicin. Eur. J. Pharmaceut. Biopharmaceut. 2006, 62, 321–331. [Google Scholar]
  6. Codina, J.C.; Perez-Garcia, A.; Romero, P.; de Vicente, A.A. Comparison of microbial bioassays for the detection of metal toxicity. Arch. Environ. Contam. Toxicol. 1993, 25, 250–254. [Google Scholar]
  7. Layton, A.C.; Sanseverino, J.; Gregory, B.W.; Easter, J.P.; Sayler, G.S.; Schultz, T.W. In Vitro Estrogen Reseptor Binding of PCBs: Measured activity and detection of hydroxylated metabolites in a recombinant yeast assay. Toxicol. Appl. Pharmacol. 2002, 180, 157–163. [Google Scholar]
  8. Henry, S.A.; Patton-Vogt, J.L. Genetic regulation of phospholipid metabolism: yeast as a model eukaryote. Prog. Nucleic Acid Res. Mol. Biol. 1998, 61, 133–79. [Google Scholar]
  9. Amberg, D.C.; Burke, D.J.; Strathern, J.N. Methods in yeast genetics. A Cold Spring Harbor Laboratory Course Manual; Cold Spring Harbor Laboratory Press: NY, UK, 2005. [Google Scholar]
  10. Tutulan-Cunita, A.C.; Mikoshki, M.; Mizunuma, M.; Hirata, D.; Miyakawa, T. Mutational analysis of the multidrug resistance ABC transporter Pdr5p with altered drug specificity. Genes Cells 2005, 10, 409–420. [Google Scholar]
  11. Campanella, L.; Faverso, G.; Mastrofini, D.; Tomassetti, M. Toxicity order of cholanic acids using an immobilised cell biosensor. J. Pharm. Biomed. Anal. 1996, 14, 1007–1013. [Google Scholar]
  12. Haubenstricker, M.E.; Meier, P.G.; Mancy, K.H.; Brabec, M.J. Rapid toxicity testing based on yeast respiratory activity. Bull. Environ. Contam. Toxicol. 1990, 44, 669–674. [Google Scholar]
  13. Henderson, G. A comparison of effects of chromate, molybdate and cadmium oxide on respiration in the yeast Saccharomyces cerevisiae. Biol. Metals 1989, 2, 83–88. [Google Scholar]
  14. Ikebukuro, K.; Miyata, A.; Cho, S.J.; Nomura, Y.; Chang, S.M.; Yamauchi, Y.; Hasebe, Y.; Uchiyama, S.; Karube, I. Microbial cyanide sensor for monitoring river water. J. Biotechnol. 1996, 48, 73–80. [Google Scholar]
  15. Uribe, S.; Rangel, P.; Espínola, G.; Aguirre, G. Effects of cyclohexane, an industrial solvent, on the yeast Saccharomyces cerevisiae and on isolated yeast mitochondria. Appl. Environ. Mirobiol. 1990, 56, 2114–2119. [Google Scholar]
  16. Toussaint, M.; Levasseur, G.; Gervais-Bird, J.; Wellinger, R.J.; Elela, S.A.; Conconi, A. A high-throughput method to measure the sensitivity of yeast cells to genotoxic agents in liquid cultures. Mutat. Res. 2006, 606, 92–105. [Google Scholar]
  17. Schmitt, M.; Gellert, G.; Ludwig, J.; Lichtenberg-Fraté, H. Phenotypic yeast growth analysis for chronic toxicity testing. Ecotoxicol. Environ. Safety 2004, 59, 142–150. [Google Scholar]
  18. Walmsley, R.M.; Billinton, N.; Heyer, W.-D. Green fluorescent protein as a reporter for the DNA damage-induced gene RAD54 in Saccharomyces cerevisiae. Yeast 1997, 13, 535–545. [Google Scholar]
  19. Peltola, P.; Ivask, A.; Åström, M.; Virta, M. Lead and Cu in contaminated urban soils: extraction with chemical reagents and bioluminescent bacteria and yeast. Sci. Total Environ. 2005, 350, 194–203. [Google Scholar]
  20. Hollis, R.P.; Killham, K.; Glover, L.A. Design and application of a biosensor for monitoring toxicity of compounds to eukaryotes. Appl. Environ. Microbiol. 2000, 66, 1676–1679. [Google Scholar]
  21. Leskinen, P.; Michelini, E.; Picard, D.; Karp, M.; Virta, M. Bioluminescence yeast assays for detecting estrogenic and androgenic activity in different matrices. Chemosphere 2005, 61, 259–266. [Google Scholar]
  22. Ike, M.; Chen, M.-Y.; Jin, C.-S.; Fujita, M. Acute toxicity, mutagenicity, and estrogenicity of biodegradation products of bisphenol-A. Environ. Toxicol. 2002, 17, 457–461. [Google Scholar]
  23. Routledge, E.J.; Sumpter, J.P. Estrogenic activity of surfactants and some of their degradation products assessed using a recombinant yeast screen. Environ. Toxicol. Chem. 1996, 15, 241–248. [Google Scholar]
  24. De Boever, P.; Demaré, W.; Vanderperren, E.; Cooreman, K.; Bossier, P.; Verstraete, W. Optimization of a yeast estrogen screen and its applicability to study the release of estrogenic isoflavones from a soygerm powder. Environ. Health Pers. 2001, 109, 691–697. [Google Scholar]
  25. Colemana, H.M.; Routledge, E.J.; Sumpter, J.P.; Eggins, B.R.; Byrne, J.A. Rapid loss of estrogenicity of steroid estrogens by UVA photolysis and photocatalysis over an immobilized titanium dioxide catalyst. Water Res. 2004, 38, 3233–3240. [Google Scholar]
  26. Michelini, E.; Leskinen, P.; Virta, M.; Karp, M.; Mora, A. A new recombinant cell-based bioluminescent assay for sensitive androgen-like compound detection. Biosens. Bioelectron. 2005, 20, 2261–2267. [Google Scholar]
  27. Rodriguez-Peña, J.M.; Diez-Muñiz, S.; Nombela, C.; Arroyo, J. A yeast strain biosensor to detect cell wall-perturbing agents. J. Biotechnol. 2007, 133, 311–317. [Google Scholar]
  28. Gould, S.J.; Keller, G.-A.; Subramani, S. Identification of peroxisomal targeting signals located at the carboxy terminus of four peroxisomal proteins. J. Cell Biol. 1988, 897–905. [Google Scholar]
  29. Leskinen, P.; Virta, M.; Karp, M. One-step measurement of firefly luciferase activity in yeast. Yeast 2003, 20, 1109–1113. [Google Scholar]
  30. Novi, S.; Pretti, C.; Cognetti, A.M.; Longo, V.; Marchetti, S.; Gervasi, G.G. Biotransformation enzymes and their induction by β-naphtoflavone in adult sea bass (Dicentrarchus labrax). Aquat. Toxicol. 1998, 41, 63–81. [Google Scholar]
  31. Crespo, J.L.; Hall, M.N. Elucidating TOR signaling and rapamycin action: lessons from Saccharomyces cerevisiae. Microbiol. Mol. Biol. Rew. 2002, 579–591. [Google Scholar]
  32. Venables, B.; Russell, A.D. Nystatin-induced changes in Saccharomyces cerevisiae. Antimicrob. Agents Chemother. 1975, 7, 121–127. [Google Scholar]
  33. Bhuiyan, M.S.A.; Ito, Y.; Nakamura, A.; Tanaka, N.; Fujita, K.; Fukui, H.; Takegawa, K. Nystatin effects on vacuolar function in Saccharomyces cerevisiae. Biosci. Biotechnol. Biochem. 1999, 96, 1075–1082. [Google Scholar]
  34. Siro, M.-R.; Romar, H.; Lövgren, T. Continous flow method for extraction and bioluminescence assay of ATP on baker's yeast. Eur. J. Appl. Microbiol. Biotechnol. 1982, 15, 258–264. [Google Scholar]
  35. Davies, J; Spiegelman, G.B; Yim, G. The world of subinhibitory antibiotic concentrations. Curr. Opin. Microbiol. 2006, 9, 445–453. [Google Scholar]
  36. Yim, G.; de la Cruz, F.; Spiegelman, G.B.; Davies, J. Transcription modulation of Salmonella enterica serovar Typhimurium promoters by sub-MIC levels of rifampin. J. Bacteriol. 2006, 188, 7988–7991. [Google Scholar]
  37. Galluzzi, L.; Karp, M. Intracellular redox equilibrium and growth phase affect the performance of luciferase-based biosensors. J. Biotechnol. 2007, 127, 188–198. [Google Scholar]
  38. Sirisattha, S.; Momose, Y.; Kitagawa, E.; Iwahashi, H. Toxicity of anionic detergents determined by Saccharomyces cerevisiae microarray analysis. Water Res. 2004, 38, 61–70. [Google Scholar]
  39. do Valle Matta, M.A.; Jonniaux, J.-L.; Balzi, E.; Goffeau, A.; van den Hazel, B. Novel target genes of the yeast regulator Pdr1p: a contribution of the TPO1 gene in resistance to quinidine and other drugs. Gene 2001, 272, 111–119. [Google Scholar]
  40. Mamnum, M.M.; Schüller, C.; Kuchler, K. Expression regulation of the yeast PDR5 ATP-binding cassette (ABC) transporter suggests a role in cellular detoxification during the exponential growth phase. FEBS Lett. 2004, 559, 111–117. [Google Scholar]
  41. Bauer, B.E.; Wolfger, H.; Kuchler, K. Inventory and function of yeast ABC proteins: about sex, stress, pleiotropic drug and heavy metal resistance. Biochim. Biophys Acta. 1999, 1461, 217–236. [Google Scholar]
  42. Prévéral, S.; Ansoborlo, E.; Mari, S.; Vavasseur, A.; Forestier, C. Metal(loid)s and radionuclides cytotoxicity in Saccharomyces verevisiae. Role of YCF1, gluthatione and effect of buthionine sulfoximine. Biochimie 2006, 88, 1651–1663. [Google Scholar]
  43. Lucau-Danila, A.; Lelandais, G.; Kozovska, Z.; Tanty, V.; Delaveau, T.; Devaux, F.; Jacq, C. Early expression of yeast genes affected by chemical stress. Mol. Cell. Biol. 2005, 124, 1860–1868. [Google Scholar]
  44. Nies, D.H. Microbial heavy-metal resistance. Appl. Microbiol. Biotechnol. 1999, 51, 730–750. [Google Scholar]
  45. Ghosh, M.; Shen, J.; Rosen, B.P. Pathways of As(III) detoxification in Saccharomyces cerevisiae. Proc. Natl. Acad. Sci. 1999, 96, 5001–5006. [Google Scholar]
  46. Beggs, W.H. Protonation of ketoconazole in relation to fungistatic activity. Mycopathology 1991, 116, 3–4. [Google Scholar]
  47. Minigawa, H.; Kitaura, K.; Nakamizo, N. Effects of pH on the activity of ketoconazole against Candida albicans. Antimicrob. Agents Chemother. 1983, 23, 105–107. [Google Scholar]
Sensors 08 06433f1a 1024Sensors 08 06433f1b 1024
Figure 1. a. Bioluminescence response to 5,6-benzoflavone in real-time monitoring during exposure of 4 h. Squares (0.75 nM), diamonds (7.5 nM), circles (75 nM) and triangles (750 nM) denote for concentration of 5,6-benzoflavone used, respectively. The error bars are shown for triplicate parallel measurements.b. Bioluminescence response to rapamycin in real-time monitoring during an exposure of 4h. Rapamycin reveals totally different bioluminescence response. The error bars are shown for triplicate parallel measurements and the symbols are diamonds (0.05 μM), Squares (0.5 μM), and circles (5 μM) denote for concentration of rapamycin used, respectively.
Figure 1. a. Bioluminescence response to 5,6-benzoflavone in real-time monitoring during exposure of 4 h. Squares (0.75 nM), diamonds (7.5 nM), circles (75 nM) and triangles (750 nM) denote for concentration of 5,6-benzoflavone used, respectively. The error bars are shown for triplicate parallel measurements.b. Bioluminescence response to rapamycin in real-time monitoring during an exposure of 4h. Rapamycin reveals totally different bioluminescence response. The error bars are shown for triplicate parallel measurements and the symbols are diamonds (0.05 μM), Squares (0.5 μM), and circles (5 μM) denote for concentration of rapamycin used, respectively.
Sensors 08 06433f1aSensors 08 06433f1b
Sensors 08 06433f2 1024
Figure 2. The bioluminescence response to nystatin, exposure of 2.5, 5 and 10 h. Squares (2.5 h), circles (5 h) and diamonds (10 h) denote for exposure used, respectively. The error bars are shown for triplicate parallel measurements.
Figure 2. The bioluminescence response to nystatin, exposure of 2.5, 5 and 10 h. Squares (2.5 h), circles (5 h) and diamonds (10 h) denote for exposure used, respectively. The error bars are shown for triplicate parallel measurements.
Sensors 08 06433f2
Sensors 08 06433f3 1024
Figure 3. Toxicity assay on agar plates. A plate containing stronger sodium azide solution (a) has no visible growth, whereas in one containing more dilute sodium azide solutions (b) no clear inhibition circles are visible. A plate containing nystatin solutions (c) is a good example of toxicity assay with clear inhibition zones.
Figure 3. Toxicity assay on agar plates. A plate containing stronger sodium azide solution (a) has no visible growth, whereas in one containing more dilute sodium azide solutions (b) no clear inhibition circles are visible. A plate containing nystatin solutions (c) is a good example of toxicity assay with clear inhibition zones.
Sensors 08 06433f3
Table
Table 1. The IC50 values (μmol/L) of the chemicals measured by the bioluminescence assay having the exposure of 2.5 h or 5 h compared to the results (minimum inhibitory concentration, μmol/L) of the conventional agar diffusion assay.
Table 1. The IC50 values (μmol/L) of the chemicals measured by the bioluminescence assay having the exposure of 2.5 h or 5 h compared to the results (minimum inhibitory concentration, μmol/L) of the conventional agar diffusion assay.
CompoundBioluminescence assay IC50 (μmol/L)Agar diffusion assay
Exposure time 2.5 hExposure time 5 hMinimum inhibitory concentration (MIC) (μmol/L)
Antimicrobial agents
5,6-benzoflavone0.0080.0060.075
CycloheximideNTa0.742.7
KetoconazoleNTNT1.0
Nystatin1.61.454.0
Rapamycin2.80.030.2
Sodium azide25.827.4- b
Sodium dodecyl sulfate133.5*10369.5*1031.8*103
Metals
Arsenic(V)oxide2.4*1030.4*10385.5*103
Sodium-m-arsenite25.5*1030.5*10314.5*103
Cadmium(II)chloride19.3*1032.0*103124.6*103
Copper(I)sulfate5.1*103ND9.8*103
Lead(II)acetate71.9*10318.4*103- c
Magnesium(II)chlorideNTNAd2060.5*103
Zinc(II)chlorideNTNA10265.6*103
aNT, not toxic, the IC50–level not reached,
bno growth visible at the assay plate,
che sample precipitated on the plate,
dNA, not assayed

Share and Cite

MDPI and ACS Style

Välimaa, A.-L.; Kivistö, A.; Virta, M.; Karp, M. Real-time Monitoring of Non-specific Toxicity Using a Saccharomyces cerevisiae Reporter System. Sensors 2008, 8, 6433-6447. https://doi.org/10.3390/s8106433

AMA Style

Välimaa A-L, Kivistö A, Virta M, Karp M. Real-time Monitoring of Non-specific Toxicity Using a Saccharomyces cerevisiae Reporter System. Sensors. 2008; 8(10):6433-6447. https://doi.org/10.3390/s8106433

Chicago/Turabian Style

Välimaa, Anna-Liisa, Anniina Kivistö, Marko Virta, and Matti Karp. 2008. "Real-time Monitoring of Non-specific Toxicity Using a Saccharomyces cerevisiae Reporter System" Sensors 8, no. 10: 6433-6447. https://doi.org/10.3390/s8106433

APA Style

Välimaa, A.-L., Kivistö, A., Virta, M., & Karp, M. (2008). Real-time Monitoring of Non-specific Toxicity Using a Saccharomyces cerevisiae Reporter System. Sensors, 8(10), 6433-6447. https://doi.org/10.3390/s8106433

Article Metrics

Back to TopTop