Next Article in Journal
One-Step Synthesis of Silver Nanoparticles Embedded Polyurethane Nano-Fiber/Net Structured Membrane as an Effective Antibacterial Medium
Next Article in Special Issue
Enhanced l-Lysine into 1,5-Diaminopentane Conversion via Statistical Optimization of Whole-Cell Decarboxylation System
Previous Article in Journal
Facile Fabrication of Durable Superhydrophobic Films from Carbon Nanotube/Main-Chain Type Polybenzoxazine Composites
Previous Article in Special Issue
Enhanced In-Vitro Hemozoin Polymerization by Optimized Process using Histidine-Rich Protein II (HRPII)
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Polymers
Volume 11
Issue 7
10.3390/polym11071184
polymers-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase

by
Hee Taek Kim
1,†,
Kei-Anne Baritugo
2,†,
Young Hoon Oh
1,
Kyoung-Hee Kang
1,
Ye Jean Jung
1,3,
Seyoung Jang
1,
Bong Keun Song
1,
Il-Kwon Kim
4,
Myung Ock Lee
5,6,
Yong Taek Hwang
5,
Kyungmoon Park
3,
Si Jae Park
2,* and
Jeong Chan Joo
1,*
1
Bio-Based Chemistry Research Center, Advanced Convergent Chemistry Division, Korea Research Institute of Chemical Technology, P.O. Box 107, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Korea
2
Division of Chemical Engineering and Materials Science, Ewha Womans University, 52 Ewhayeodae-gil, Seodaemun-gu, Seoul 03760, Korea
3
Department of Biological and Chemical Engineering, Hongik University, 2639 Sejong-ro, Sinan-ri, Jochiwon-eup, Sejong-si 30016, Korea
4
Bioprocess R&D Center, DAESANG Corp., Icheon-si, Gyeonggi-do 17384, Korea
5
Lotte Chemical, 115 Gajeongbuk-ro, Yuseong-gu, Daejeon 34110, Korea
6
Department of Chemistry, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
*
Authors to whom correspondence should be addressed.
†
Hee Taek Kim and Kei-Anne Baritugo contributed equally to this work.
Polymers 2019, 11(7), 1184; https://doi.org/10.3390/polym11071184
Submission received: 16 June 2019 / Revised: 3 July 2019 / Accepted: 5 July 2019 / Published: 14 July 2019
(This article belongs to the Special Issue Microbial Production and Application of Biopolymers)
Browse Figures
Versions Notes

Abstract

:
Cadaverine is a C5 diamine monomer used for the production of bio-based polyamide 510. Cadaverine is produced by the decarboxylation of l-lysine using a lysine decarboxylase (LDC). In this study, we developed recombinant Escherichia coli strains for the expression of LDC from Hafnia alvei. The resulting recombinant XBHaLDC strain was used as a whole cell biocatalyst for the high-level bioconversion of l-lysine into cadaverine without the supplementation of isopropyl β-d-1-thiogalactopyranoside (IPTG) for the induction of protein expression and pyridoxal phosphate (PLP), a key cofactor for an LDC reaction. The comparison of results from enzyme characterization of E. coli and H. alvei LDC revealed that H. alvei LDC exhibited greater bioconversion ability than E. coli LDC due to higher levels of protein expression in all cellular fractions and a higher specific activity at 37 °C (1825 U/mg protein > 1003 U/mg protein). The recombinant XBHaLDC and XBEcLDC strains were constructed for the high-level production of cadaverine. Recombinant XBHaLDC produced a 1.3-fold higher titer of cadaverine (6.1 g/L) than the XBEcLDC strain (4.8 g/L) from 10 g/L of l-lysine. Furthermore, XBHaLDC, concentrated to an optical density (OD600) of 50, efficiently produced 136 g/L of cadaverine from 200 g/L of l-lysine (97% molar yield) via an IPTG- and PLP-free whole cell bioconversion reaction. Cadaverine synthesized via a whole cell biocatalyst reaction using XBHaLDC was purified to polymer grade, and purified cadaverine was successfully used for the synthesis of polyamide 510. In conclusion, an IPTG- and PLP-free whole cell bioconversion process of l-lysine into cadaverine, using recombinant XBHaLDC, was successfully utilized for the production of bio-based polyamide 510, which has physical and thermal properties similar to polyamide 510 synthesized from chemical-grade cadaverine.

Graphical Abstract

1. Introduction

The bio-based production of industrial platform chemicals and fuels from renewable resources in biorefineries is a promising, sustainable alternative to current petroleum-based chemical production processes [1,2,3,4,5,6,7]. Biorefineries have been successfully developed for the conversion of a broad range of biomass feedstocks, such as lignocellulosic hydrolysates, algal residue, and recalcitrant coal, into chemicals with properties comparatively similar to petrochemical-based products [8,9,10,11,12,13,14,15,16,17,18,19,20,21,22]. In biorefineries, the microbial fermentation of biomass-derived sugars has successfully produced numerous value-added biochemicals such as amino acids, dicarboxylic acids, amino carboxylic acids, and short chain diamines [23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43]. These biochemicals are considered platform chemicals which may be used for the production of bio-based polymers, such as polylactic acid (PLA), polybutylene succinate (PBS), and polyamides 54, 56, and 510 [44,45]. Polyamides have been successfully synthesized from fermentation-derived bio-based monomers including diamines, dicarboxylic acids, and amino carboxylic acids. The material properties of these bio-based polyamides are comparable to those of petrochemical-based polyamides and thus considered as green plastics in various industrial applications. The broad range of carbon numbers and functional groups in the bio-based monomers has enabled the sustainable production of polyamides with versatile material properties [1,2,3,4,5,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43]. Currently, various bio-based polyamides, such as polyamide 4, polyamide 510, and polyamide 65, have been developed for application in areas such as apparels, food packaging, automobiles, electronics, and the textile industry [4,30,34,35,36,37,38,39,40].
Cadaverine is a C5 diamine that has a similar structure to hexamethylene-diamine, a monomer which is used in the petrochemical-based production of polymers like polyurethanes and non-isocyanate polyurethanes (NIPU) [15]. The bio-based production of cadaverine has been extensively studied because of its application as a co-monomer for production of various bio-nylons. Cadaverine can be produced by decarboxylation of l-lysine using an l-lysine decarboxylase (LDC) [3,4,23]. The direct fermentative production of cadaverine from renewable resources such as starch and lignocellulosic hydrolysates has been extensively studied using recombinant strains of Escherichia coli and Corynebacterium glutamicum [4,23,24,25,26,27,28,29,30,31,32,33,34,35,36]. The biosynthesis of cadaverine in E. coli occurs naturally due to two endogenous lysine decarboxylases; constitutive LdcC and inducible CadA [23]. During the early stages of cadaverine biosynthesis, 9.61 g/L of cadaverine was produced in fed-batch fermentation using recombinant E. coli XQ56 with plasmid-based overexpression of the cadA gene under a strong tac promoter and dihydrodipicolinate synthase (dapA) under a strong trc promoter. Key enzymes related to cadaverine utilization pathways, putrescine/cadaverine aminopropyltransferase, spermidine acetyltransferase, glutamate-putrescine/glutamate-cadaverine ligase, and putrescine/cadaverine aminotransferase (ΔspeE, ΔspeG, ΔpuuA, and ΔygjG), were deleted [36]. To improve the direct fermentative production of cadaverine, the recombinant C. glutamicum strains were developed via the heterologous expression of either the E. coli cadA or ldcC gene [4,23,24,25,26,27,28,29,30,31,32,33,34,35]. Most recombinant C. glutamicum strains produced higher titers of cadaverine from biomass-derived sugars than recombinant E. coli due to the natural capability of C. glutamicum for overproducing l-lysine, an important precursor of cadaverine, and the absence of related pathways for cadaverine utilization [4,23]. In fact, the highest titer of 103.8 g/L of cadaverine was produced from glucose by a fed-batch cultivation of recombinant C. glutamicum with the chromosomal integration of E. coli ldcC gene under a strong promoter, PH30, at the lysine exporter site (lysE) [35]. However, the direct fermentative production of cadaverine from glucose is limited by low titers (9.61–103.8 g/L) and the complicated nature of downstream processes involved in the purification of cadaverine [35,36]. Therefore, whole cell bioconversion is being explored as an alternative process for the economical production of cadaverine, because the substrate is directly converted into the target product using recombinant microorganisms as biocatalysts. This approach has already been used for the high-level production of polyamide monomers such as gamma-aminobutyric acid (GABA), 5-aminovaleric acid (5-AVA), and cadaverine [38,39,40,43]. It has been reported that 5.46 g/L of GABA, a polyamide 4 monomer, can be produced from 10 g/L of l-glutamate via whole cell bioconversion using recombinant E. coli strains expressing a glutamate decarboxylase [39]. The whole cell bioconversion of 120 g/L of l-lysine into 91 g/L of 5-aminovaleric acid was achieved by using recombinant E. coli expressing delta-aminovaleramidase and l-lysine 2-monooxygenase from Pseudomonas putida (davBA) [38]. The high-level production of 134 g/L of cadaverine was produced from 193 g/L of l-lysine via whole cell bioconversion using recombinant E. coli strains with an overexpression of the ldcC gene [40]. The whole cell bioconversion of l-lysine into cadaverine utilizing recombinant E. coli JM109 expressing cadA produced 69 g/L cadaverine in six hours with a productivity of 11.5 g/L/h [41]. Moreover, the whole cell bioconversion of l-lysine into cadaverine by employing an E. coli strain BL21 expressing cadA along with cadB encoding l-lysine/cadaverine antiporter produced cadaverine as high as 221 g/L with a molar yield of 92% when 8 g/dry cell weight per L of recombinant E. coli cells were employed as a catalyst for the fed-batch bioconversion of 344 ± 5 g/L of l-lysine [42].
Previously, we reported the development of E. coli whole cell biocatalysts for cadaverine production from l-lysine by analyzing five different l-lysine decarboxylases from E. coli, Ralstonia eutropha, Pseudomonas aeruginosa, and Pseudomonas putida [40]. An l-lysine decarboxylase with a high activity can be a good candidate for the preparation of a whole cell biocatalyst. Among these LDC enzymes, an E. coli l-lysine decarboxylase encoded by ldcC was found to be the most promising LDC for the production of cadaverine from l-lysine under optimized reaction conditions, based on results related to substrate pH, substrate concentrations, buffering conditions, and biocatalyst concentrations [40,43]. Recently, a Hafnia alvei l-lysine decarboxylase was reported to have higher l-lysine decarboxylase activity than constitutive LdcC and inducible CadA from E. coli [46]. Therefore, the cadaverine production capability of the recombinant strain harboring an l-lysine decarboxylase genes from E. coli and Hafnia alvei can be investigated to develop an efficient process for cadaverine production. In the current study, we developed recombinant E. coli strains for the expression of a Hafnia alvei lysine decarboxylase (ldcC) in order to enhance the titer as well as the yield of cadaverine from the bioconversion of l-lysine in a reaction medium, without the additional use of inducers and cofactors, such as isopropyl β-d-1-thiogalactopyranoside (IPTG) and pyridoxal pyrophosphate (PLP), respectively. Furthermore, purified bio-based cadaverine, produced via the whole cell reaction described above, was then used for polymerization with sebacic acid to synthesize bio-based polyamide 510 (Figure 1). The whole cell bioconversion process described in this study provides a more economical process for commercial cadaverine production, because the system efficiently converts l-lysine into cadaverine without IPTG and PLP supplementation, which eliminates additional costs associated with such supplementation.

2. Materials and Methods

2.1. Bacterial Strains, Plasmids, Genes, and Chemicals

The bacterial strains and plasmids used in this study are listed in Table 1. E. coli XL1-Blue (Stratagene Cloning Systems, La Jolla, CA, USA) was used for general gene cloning. For enzyme characterization experiments, ldc genes were expressed in E. coli BL21 (DE3) using pET vectors. A recombinant E. coli XL1-Blue strain expressing ldc genes from H. alvei and E. coli were used for whole cell bioconversion reactions. The plasmid pKE112-MCS with a strong tac promoter was used for the IPTG-free expression of ldc genes [38,40]. A 1.5 M substrate stock solution prepared from chemical grade l-lysine (St. Louis, MO, USA) was used for indicated whole cell bioconversion reactions (Figure 2 and Figure 3). An industrial grade of l-lysine was provided by DAESANG Corp. (Gunsan, Korea). A 2.73 M l-lysine stock solution (400 g/L of l-lysine) prepared from the industrial grade l-lysine was appropriately diluted to indicated concentrations in the reaction mixture (Figure 4).

2.2. Plasmid Construction

All DNA manipulations were performed following standard procedures. A polymerase chain reaction (PCR) was performed with a C1000 Thermal Cycler (Bio-Rad, USA). Primers used in this study were synthesized at Bioneer (Daejeon, Korea); (Table S1). E. coli ldcC (GenBank accession number NP_414728.1) and H. alvei ldcC (GenBank accession number X03774.1) were cloned into pKE112-MCS vector at BamHI and SbfI sites to construct pKE112-EcLdcC and pKE112-HaLdcC, respectively. For enzyme purification, E. coli and H. alvei ldcC genes were prepared using appropriate primers for cloning each gene into pET22b(+) at XbaI and XhoI sites, respectively (Table S1). For the whole cell bioconversion of l-lysine into cadaverine at 30 °C, 37 °C, and 52 °C, plasmids used to express E. coli and H. alvei ldc genes were constructed by the insertion of the respective ldc at HindIII and XhoI, of pET24ma(+) [43].

2.3. Purification of E. coli and H. alvei l-lysine Decarboxylase for In Vitro Analysis of Enzyme Activities

H. alvei and E. coli l-lysine decarboxylases were purified and subjected to enzymatic characterization. The purification of LDC enzymes was performed as previously described [47]. E. coli BL21 (DE3) was transformed with engineered pET vectors for the expression of LDC from E. coli and H. alvei (Table 1). The resulting recombinant strains were cultivated in 100 mL of a Luria Bertani (LB) medium in a 250 mL flask for 24 h at 37 °C and 250 rpm. The overexpression of E. coli and H. alvei LDC enzymes was induced by the addition of 0.05 M IPTG. After 24 h of induction at 20 °C, cells were centrifuged at 4000 rpm for 20 min at 4 °C and resuspended in a lysis buffer (50 μM of pyridoxal phosphate (PLP), 50 mM of NaH2PO4, 300 mM of NaCl, and 10 mM of imidazole: pH 8). Then, the resuspended cells were sonicated using an ultrasonicator (Vibra Cell, Soncis Scientific, Newtown, CT, USA) for 20 min on ice (5 s on, 8 s off). The cell lysates were centrifuged, and the supernatant was incubated with an Ni-NTA affinity resin for 30 min. The Ni-NTA resin was washed three times with a wash buffer (50 mM of NaH2PO4, 300 mM of NaCl, and 20 mM of imidazole: pH 8). Then, His-tagged LDCs were eluted with an elution buffer (50 mM of NaH2PO4, 300 mM of NaCl, and 250 mM of imidazole: pH 8). The in vitro enzyme activity of purified LDC enzymes was measured in 96-well plates using a 2,4,6-trinitrobenzenesulfonic acid (TNBS)-based assay as previously described [46]. Reaction mixtures contained 0.2 mM of PLP, l-lysine (0.1–20 mM), and the LDC enzyme (0.2 ug/L) in a final volume of 200 uL of a 0.05 mM sodium citrate buffer. One unit of l-lysine decarboxylase activity was defined as the amount of enzyme producing 1μmol of cadaverine per min at 37 °C.

2.4. Whole Cell Bioconversion of l-Lysine into Cadaverine by the Recombinant E. coli Strains Expressing E. coli and H. alvei l-Lysine Decarboxylase

Overnight cultures of recombinant BL21 (DE3) and E. coli XL1-Blue strains expressing E. coli ldcC or H. alvei ldcC were incubated at 37 °C, 250 rpm in an LB medium. In order to prepare whole cell biocatalysts for cadaverine production with PLP supplementation, 10 mL of overnight cultures of E. coli BL21 (DE3) harboring E. coli ldcC or H. alvei ldcC were transferred to 500 mL of an LB medium in 2 L baffled flasks. Cells were induced with 0.05 mM of IPTG after reaching OD600 between 0.5 and 0.6 and were incubated for 24 h at 20 °C and 250 rpm. Cells were collected and diluted with a sodium acetate buffer to obtain OD600 of 10 for whole cell bioconversions at 30, 37, or 52 °C with PLP supplementation (Figure 2). 1.5 M of chemical grade l-lysine were added to reaction mixtures to obtain a final concentration of 1 M of l-lysine substrate. The reactions were stopped by heating at 100 °C for 5 min. For cadaverine production under IPTG and PLP-free conditions (Figure 3 and Figure 4), the overnight cultures of E. coli XL1-Blue E. coli ldcC or H. alvei ldcC were first transferred to 100 mL of a PLP-free MR medium in a 250 mL flask with 20 g/L of glucose and 10 g/L (68 mM) of chemical grade l-lysine, and the cells were incubated at 37 °C and 250 rpm (Figure 3). For the whole cell bioconversion of industrial grade l-lysine (Figure 4), 10 mL of overnight cultures of E. coli XL1-Blue harboring E. coli ldcC or H. alvei ldcC were used to inoculate 500 mL of a PLP-free MR medium in 2 L baffled flasks which are incubated for 24 h at 37 °C, 250 rpm, and cells were collected and diluted to obtain OD600 of 50 (Figure 4). The PLP-free MR medium (pH 7.0) contained: 6.67 g/L of KH2PO4, 4 g/L of (NH4)2HPO4, 0.8 g/L of MgSO4·7H2O, 0.8 g/L of citric acid, and 5 mL/L of a trace metal solution. The trace metal solution (0.5 M of HCl) contained 10 g/L of FeSO4·7H2O, 2 g/L of CaCl2, 2.2 g/L of ZnSO4·7H2O, 0.5 g/L of MnSO4·4H2O, 1 g/L of CuSO4·5H2O, 0.1 g/L of (NH4)6Mo7O24·4H2O, and 0.02 g/L of Na2B4O7·10H2O. Glucose and MgSO4·7H2O were separately sterilized in an autoclave. 2.73 M of an industrial grade l-lysine stock solution were added to reaction mixtures to obtain a final concentration of a 1.37 M l-lysine substrate (200 g/L). Both 1.5 M of chemical grade l-lysine and 2.73 M of industrial grade l-lysine stock solutions were filter-sterilized using a 0.22 uM polyethersulfone (PES) membrane. An appropriate amount of 1 N of HCl was added to the substrate solutions to adjust the pH to 6.8 prior to filtration. Ampicillin (50 μg/mL) or kanamycin (15 μg/mL) was added to the medium for selection of bacteria with plasmids.

2.5. Purification of Crude Cadaverine Soluton from the Whole Cell Bioconversion of l-lysine

The purification of the crude cadaverine solution, obtained from the whole cell bioconversion of l-lysine, was performed according to a previously reported procedure [35]. An appropriate amount of NaOH was added to the crude cadaverine solution to adjust the pH to 14 in order to improve the efficiency of solvent extraction. Next, equal volumes of pH-adjusted crude cadaverine solution and chloroform were mixed in order to extract the cadaverine into the chloroform phase. Then, the mixed solution of cadaverine and chloroform was heated for 2 h at 55 °C. Following 2 h, the chloroform phase was collected in a round-bottom flask, and the water phase containing cadaverine was subjected to the same extraction procedure described above. The collected chloroform phase was concentrated using a rotary evaporator at 175 rpm and 60 °C. Finally, cadaverine of high purity (>99.5%) was obtained by fractional distillation using a laboratory distillation apparatus. Distillation was performed at 25−120 mbar and 120−135 °C [35].

2.6. Polymerization of Purified Cadaverine for the Synthesis of Bio-Based Polyamide 5,10

Polymerization for the synthesis of bio-based polyamide 510 was conducted by using equimolar purified cadaverine (65 g, 636 mmol) and sebacic acid (126 g, 623 mmol). For the polymerization reaction, a monomer solution was dissolved in deionized water (170 g), and a total of 361 g of the reaction solution was added to a 1 L autoclave reactor. Sodium hypophosphite monohydrate 13.2 mg (0.12 mmol, 79 ppm of final polymer) was used as reaction catalyst, and nitrogen gas was flushed to remove oxygen in the reactor. Polyamide 510 salt was obtained by increasing the temperature to 140 °C for 30 min. A pre-polymerization reaction was conducted at 215 °C and 17.2 bar, and the water vapor was slowly removed to maintain the constant pressure for 45 min. The pre-polymerization step was completed by the gradual reduction of pressure to atmospheric pressure. In the polymerization step, the reactor temperature was first heated to 270 °C. The reactor was stirred for 80 min at 1 atm and then further stirred for 10 min under a complete vacuum condition. Finally, polyamide 510 was obtained via extrusion under nitrogen pressure.

2.7. Analytical Procedures

Cadaverine and l-lysine concentrations were determined using HPLC fitted with an Optimapak C18 column (RStech, DaeJeon, Korea) as previously described [35,40,43]. For a comparison of the expression levels of the l-lysine decarboxylase enzymes from H. alvei and E. coli, a bradford assay and 10% SDS-PAGE analysis were conducted using recombinant XBHaLDC, XBEcLDC, BL21HaLDC, and BL21EcLDC strains (Figures S1 and S2). To characterize bio-based polyamide 510 produced from purified cadaverine, a proton nuclear magnetic resonance (1H NMR, 261DD2 (500 MHz), Agilent) analysis was conducted using bio-based polyamide 510 dissolved in hexa fluoro-2-propanol (HFIP) and CDCl3. Differential scanning calorimetry (DSC, Q200, TA Instruments, New Castle, DE, USA) was used to measure melting temperature (Tm) and crystallization temperature (Tc). DSC analysis was performed by melting polyamide 510 gradually at a rate of 10 °C/min. Next, the sample was cooled and reheated at the same rate from 30 to 250 °C. The degradation temperature (Td) of polyamide 510 was determined using thermogravimetric analysis (TGA, Q2950, TA Instruments). TGA analysis was conducted via the application of heat from 40 to 900 °C at 20 °C/min under N2 [35].

3. Results and Discussion

3.1. Characterization of Lysine Decarboxylase from E. coli and H. alvei

In order to develop an efficient and economic whole cell conversion system for cadaverine production, the recombinant biocatalyst should be active at moderate temperatures of 30 and 37 °C. We evaluated the activity of the lysine decarboxylase from E. coli and H. alvei at 30 and 37 °C, because these temperatures are generally optimal for cultivation of recombinant E. coli biocatalyst. We also evaluated bioconversion at 52 °C because it was previously reported as optimal for E. coli LDC activity (Figure 2) [40,43,48]. Though the reported optimal temperature for H. alvei LDC is 37 °C, a lysine decarboxylase from both H. alvei and E. coli was able to achieve a maximal rate of bioconversion at a higher temperature of 52 °C [47]. After 7 h of reaction, H. alvei LDC converted 146 g/L (1 M) of l-lysine into 89 g/L of cadaverine, while E. coli LDC produced 98 g/L. When the reactions were performed at 30 and 37 °C, H. alvei LDC produced 57 and 89 g/L of cadaverine, respectively. These values were 81% and 42% higher than the cadaverine titer produced by E. coli LDC, which were 32 and 62 g/L at 30 and 37 °C, respectively. These results were similar to previously reported optimal temperatures for H. alvei and E. coli constitutive lysine decarboxylases, which were 37 and 52 °C, respectively [43,46,47,48,49,50]. Based on these results, the system harboring a lysine decarboxylase from H. alvei was identified as a superior enzyme for industrial processing at 37 °C due to the conversion temperature being similar to catalyst cultivation temperatures, which, in turn, positively affects the overall operating cost (Figure 2).
An in vitro enzyme assay was conducted to the evaluate enhanced l-lysine conversion by a lysine decarboxylase from H. alvei. In addition, SDS-PAGE was performed to analyze protein expression (Figure S1). Experiments for characterization of LDC enzyme kinetics using purified H. alvei LDC and E. coli LDC were performed, but no saturation for l-lysine (0.1–20 mM) was observed (Figure S3). In the presence of 20 mM l-lysine at 37 °C, the specific activity of H. alvei LDC (1746 U/mg protein) was 1.7-fold higher than that of E. coli LDC (1021 U/mg protein). The specific activities of a purified lysine decarboxylase from E. coli and H. alvei at 37 °C were comparable to previously reported values, which were 1500 U/mg protein and 2466 U/mg protein, respectively [46]. Moreover, SDS-PAGE analyses showed that the level of protein expression by a lysine decarboxylase from H. alvei was higher than that of E. coli in all cellular fractions (Figure S1). This may explain the superior bioconversion ability of H. alvei LDC compared to E. coli LDC, although both enzymes are similar in size and amino acid sequence, showing 85% conserved residues between E. coli and H. alvei LDCs, 713, and 739 amino acids, respectively [50]. Based on these results, the lysine decarboxylase from H. alvei produced higher amounts of cadaverine due to its higher specific activity at 37 °C and higher level of expression in both soluble and insoluble fraction than the lysine decarboxylase from E. coli.

3.2. Development of IPTG-Free System for Whole Cell Bioconversion of l-Lysine into Cadaverine Using Lysine Decarboxylase from H. alvei and E. coli

The overall cost of production is the most important factor in the development of a whole cell bioconversion process for the commercial production of value-added chemicals. Process conditions, which may affect the economic feasibility of a whole cell bioconversion procedure are: (1) Conversion rate by biocatalyst; (2) the loading amount of substrate; and (3) the addition of inducers and enzyme co-factors to improve product formation [38,39,40,43]. In processes developed for the whole cell bioconversion of l-lysine into cadaverine, the addition of isopropyl β-d-1-thiogalactopyranoside (IPTG) and pyridoxal phosphate (PLP) is required for the efficient expression and the reaction of a lysine decarboxylase, because IPTG is used as an inducer for protein expression, and PLP is an important co-factor for LDC reactions [4,23,43]. However, the use of IPTG and PLP results in additional costs. Therefore, a whole cell biocatalyst system that does not require IPTG for the economical production of cadaverine was developed and evaluated for its ability for the whole cell bioconversion of l-lysine into cadaverine using a PLP-free medium. Firstly, we constructed an LDC expression system based on a pKE112 vector in order to develop an IPTG-free system for the expression of LDC from H. alvei and E. coli. The pKE112 vector system was previously used for the production of cadaverine and 5-aminovalerate from glucose [38,40]. Previously screened optimal host E coli XL1-Blue was used for the whole cell bioconversion experiments in this study [40]. The recombinant strains, XBHaLDC and XBEcLDC, were constructed for the IPTG-free expression of H. alvei and E. coli lysine decarboxylases, respectively. The protein expressions in the XBHaLDC and XBEcLDC strains in a PLP-free medium, with and without the supplementation of 0.05 mM of IPTG, were compared first. The levels of protein expression by both XBHaLDC and XBEcLDC were not significantly different after 24 and 96 h of incubation in a PLP-free medium with and without IPTG supplementation (Figure S2). Therefore, the bioconversion of l-lysine into cadaverine by these strains was compared in a PLP-free MR medium with 10 g/L of l-lysine [40]. The recombinant XBHaLDC strain produced 6.08 g/L of cadaverine from 10 g/L of l-lysine after 120 h (Figure 3). This value was 27% higher than the 4.78 g/L of cadaverine produced by XBEcLDC. Higher l-lysine into cadaverine conversion yield and productivity (0.05 g/Lh > 0.04 g/Lh) were obtained using the H. alvei l-lysine decarboxylase (87% molar yield) compared to the E. coli l-lysine decarboxylase (68% molar yield) (Figure 3) These results indicated that the pKE112 system may be used for the efficient conversion of l-lysine into cadaverine.
To further evaluate the potential of XBHaLDC for industrial application as a biocatalyst for whole cell bioconversion, the reaction was conducted in a PLP-free MR medium with a high substrate concentration (200 g/L (1.37 M) of l-lysine), which was supported by using industrial grade l-lysine. The whole cell bioconversion by XBEcLDC was compared to that of the XBHaLDC developed in this study. The recombinant XBHaLDC strain was capable of a higher rate of l-lysine consumption and cadaverine production than XBEcLDC in the early stages of reaction (Figure 4). The recombinant XBHaLDC strain exhibited a rapid conversion of l-lysine into cadaverine (123.2 g/L) at 12 h of reaction compared to the recombinant XBEcLDC strain (79.6 g/L). The measured productivity of XBHaLDC was significantly higher than XBEcLDC after 12 h of reaction (10.3 g/L/h > 6.6 g/L/h). The productivity of the XBHaLDC strain (10.3 g/Lh) was comparable to productivities (11.3–13.9 g/L/h) of other recombinant E. coli strains employed for the whole cell conversion of l-lysine to cadaverine in previous studies [41,42,43]. After 120 h of a whole cell bioconversion reaction using 200 g/L of l-lysine, XBHaLDC produced 136.3 g/L of cadaverine (97% molar yield), while XBEcLDC produced 132.8 g/L of cadaverine (95% molar yield). Though the final titer and molar yield of cadaverine by both strains were almost similar, it was noted that the rate of l-lysine conversion into cadaverine was faster with XBHaLDC than XBEcLDC. High productivity is useful because it reduces overall operating costs. Cadaverine produced by XBHaLDC was purified, concentrated, and polymerized with sebacic acid in order to investigate the material properties of bio-based polyamide 510 as previously described [35].
The polymerization of purified cadaverine with bio-based sebacic acid was conducted to investigate the use of a bio-based cadaverine monomer for the industrial scale synthesis of bio-based polyamide 510 [35]. As shown in Figure S4A, typical chemical shifts of polyamide 510 were detected. These results confirm that the polymer produced by the polymerization of bio-based cadaverine from the whole cell bioconversion of l-lysine and bio-based sebacic acid is polyamide 510. The material properties of polyamide 510 synthesized in this study were comparable to those reported in our previous study [35]. The relative viscosity was 2.7, the weight average molecular weight (Mw) was 130,532 g/mol, and the number average molecular weight (Mn) was approximately 78,412 g/mol. A DSC analysis of the resulting polyamide 510 revealed that the melting temperature (Tm) and crystallization temperature (Tc) were 215.7 and 171.1 °C, respectively (Figure S4B). The observed Tm value of the synthetized polyamide 510 was comparable to that of polyamide 510 synthesized from chemical-grade cadaverine and bio-based sebacic acid. The value of the degradation temperature (Td) was 445.1 °C, indicating that the resulting polyamide 510 may be used as a heat resistant material (Figure S4C) [35]. Based on these results, the platform developed in this study for synthesizing polyamide 510 may be a potential replacement for petroleum-based polyamide.

4. Conclusions

In this study, we developed an IPTG- and PLP-free process for the whole cell bioconversion of l-lysine into cadaverine using a recombinant XBHaLDC biocatalyst to express a lysine decarboxylase from H. alvei. The enzyme characterization of the lysine decarboxylase encoded by H. alvei revealed that H. alvei LDC has higher protein expression levels and a higher specific activity at 37 °C than E. coli LDC, resulting in more the efficient production of cadaverine. The further purification of bio-based cadaverine produced via whole cell bioconversion and subsequent polymerization can produce polyamide 510 that may have a wider range of applications. Whole cell bioconversion using recombinant biocatalysts under optimized reaction conditions is a promising strategy which may be useful for the bio-based production of value added material, since the strategy developed in this study may be easily integrated into existing commercial l-lysine production processes. The overall cost of production is reduced due to separation of l-lysine production from the subsequent cadaverine conversion process, enabling easier separation and purification as well as a final fermentation derived cadaverine product of a higher purity. The further improvement of the strategy employed in our study may allow the co-production of cadaverine with other l-lysine-derived industrial chemicals of interest, such as 5-aminovalerate and glutaric acid [38,40].

Supplementary Materials

The following are available online at https://www.mdpi.com/2073-4360/11/7/1184/s1, Figure S1. SDS-PAGE analysis of recombinant E. coli BL21EcLDC and BL21HaLDC. Abbreviations: WCL—whole cell lysate, L—protein ladder, S—soluble fraction, IS—insoluble fraction; Figure S2. SDS-PAGE analysis of recombinant E. coli XBHaLDC and XBEcLDC after 96 h of cultivation in a PLP-free MR medium with 20 g/L of glucose and 10 g/L g l-lysine. Lanes: 1—E. coli XB wild type, MW- molecular weight marker, 2—XBEcLDC 24 h sample, 3—XBEcLDC 24 h sample with IPTG induction, 4—XBHaLDC 24 h sample, 5—XBHaLDC, 24 h sample with IPTG induction, 6—XBEcLDC 96 h sample, 7—XBEcLDC 96 h sample with IPTG induction, 8—XBHaLDC 96 h sample, 9—XBHaLDC 96 h sample with IPTG induction; Table S1. Primers used in this study. Figure S3. Decarboxylation of l-lysine into cadaverine by purified E. coli LDC and H. alvei LDC. Enzyme reactions were performed with the indicated concentration of l-lysine substrate (Symbols: filled blue circle, E. coli LDC; filled red circle, H. alvei LDC). Figure S4. Results of nuclear magnetic resonance spectroscopy (1H NMR spectra) (a) with detected solvent peaks [4.56–4.21 (multiplet, HFIP) and 7.27 (singlet, CDCl3)] and detected cadaverine backbone peaks [6.09 (2H, t; peak a), 3.27 (4H, q; peak b), 2.23 (4H, t; peak e), 1.58–1.54 (8H, m; peak c,f), 1.33 (10H, B; peak d,g)]; differential scanning calorimetry (DSC) (b); and thermogravimetric (TGA) analysis (c) of bio-based polyamide PA510. Table S1. Primers used in this study.

Author Contributions

The study was conceptualized by S.J.P. and J.C.J. The experiments and formal analysis were performed by H.T.K., K.-A.B., Y.H.O., K.-H.K., Y.J.J., S.J., B.K.S., I.-K.K., M.O.L., Y.T.H., and K.P. The original draft was prepared by H.T.K. and K.-A.B. The paper was edited and reviewed by S.J.P. and J.C.J. The resources for completion of this study were provided by H.T.K., S.J.P., and J.C.J.

Funding

This work was supported by the Bio & Medical Technology Development Program through the National Research Foundation (NRF) of Korea funded by the Ministry of Science and ICT (MSIT) (NRF-2018M3A9H3020459) and the Lignin Biorefinery from MSIT through the NRF of Korea (NRF-2017M1A2A2087634).

Conflicts of Interest

The authors declare that they have no competing interests.

References

  1. Becker, J.; Wittmann, C. Advanced Biotechnology: Metabolically Engineered Cells for the Bio-Based Production of Chemicals and Fuels, Materials, and Health-Care Products. Angew. Chem. Int. Ed. 2015, 54, 2–25. [Google Scholar] [CrossRef] [PubMed]
  2. Oh, Y.H.; Eom, I.Y.; Joo, J.C.; Yu, J.H.; Song, B.G.; Lee, S.H.; Hong, S.H.; Park, S.J. Recent advances in development of biomass pretreatment technologies used in biorefinery for the production of bio-based fuels, chemicals and polymers. Korean J. Chem. Eng. 2015, 32, 1945–1959. [Google Scholar] [CrossRef]
  3. Lee, J.W.; Kim, H.U.; Choi, S.; Yi, J.H.; Lee, S.Y. Microbial production of building block chemicals and polymers. Curr. Opin. Biotechnol. 2011, 22, 758–767. [Google Scholar] [CrossRef] [PubMed]
  4. Baritugo, K.; Kim, H.T.; David, Y.; Choi, J.H.; Choi, J.; Kim, T.W.; Park, C.; Hong, S.H.; Na, J.G.; Jeong, K.J.; et al. Recent advances in metabolic engineering of Corynebacterium glutamicum strains as potential platform microorganisms for biorefinery. Biofuel Bioprod. Biorefining 2018, 12, 899–925. [Google Scholar] [CrossRef]
  5. Baritugo, K.; Kim, H.T.; David, Y.; Choi, J.; Hong, S.H.; Jeong, K.J.; Joo, J.C.; Park, S.J. Metabolic engineering of Corynebacterium glutamicum for fermentative production of chemicals in biorefinery. Appl. Microbiol. Biotechnol. 2018, 102, 3915–3937. [Google Scholar] [CrossRef] [PubMed]
  6. Joo, J.C.; Khusnutdinova, A.N.; Flick, R.; Kim, T.H.; Bornscheuer, U.T.; Yakunin, A.F.; Mahadevan, R. Alkene hydrogenation activity of enoate reductases for an environmentally benign biosynthesis of adipic acid. Chem. Sci. 2017, 8, 1406–1413. [Google Scholar] [CrossRef] [PubMed]
  7. Joo, J.C.; Oh, Y.H.; Yu, J.H.; Hyun, S.M.; Khang, T.U.; Kang, K.H.; Song, B.K.; Park, K.; Oh, M.K.; Lee, S.Y.; et al. Production of 5-aminovaleric acid in recombinant Corynebacterium glutamicum strains from a Miscanthus hydrolysate solution prepared by a newly developed Miscanthus hydrolysis process. Bioresour. Technol. 2017, 244, 1692–1700. [Google Scholar] [CrossRef]
  8. David, Y.; Baylon, M.G.; Sudheer, P.D.V.N.; Baritugo, K.; Chae, C.G.; Kim, Y.J.; Kim, T.W.; Kim, M.; Na, J.G.; Park, S.J. Screening of microorganisms able to degrade low-rank coal in aerobic conditions: Potential coal bio-solubilization mediators from coal to biochemical. Biotechnol. Bioprocess Eng. 2017, 22, 178–185. [Google Scholar] [CrossRef]
  9. Andin, N.; Longieras, A.; Veronese, T.; Marcato, F.; Molina-Jouve, C. Improving carbon and energy distribution by coupling growth and medium chain length polyhydroxyalkanote production from fatty acids by Pseudomonas putida KT2440. Biotechnol. Bioprocess Eng. 2017, 22, 308–318. [Google Scholar] [CrossRef]
  10. Rhie, M.N.; Kim, H.T.; Jo, S.Y.; Chu, L.L.; Baritugo, K.; Baylon, M.G.; Lee, J.; Na, J.; Kim, L.H.; Kim, T.W.; et al. Recent advances in the Metabolic Engineering of Klebsiella pneumoniae: A Potential Platform Microorganism for Biorefineries. Biotechnol. Bioprocess Eng. 2019, 24, 48–64. [Google Scholar] [CrossRef]
  11. Kim, H.S.; Oh, Y.H.; Jang, Y.; Kang, K.H.; David, Y.; Yu, J.H.; Song, B.K.; Choi, J.; Chang, Y.K.; Joo, J.C.; et al. Recombinant Ralstonia eutropha engineered to utilize xylose and its use for the production of poly(3-hydroxybutyrate) from sunflower stalk hydrolysate solution. Microb. Cell Factories 2016, 15, 95. [Google Scholar] [CrossRef] [PubMed]
  12. Park, S.J.; Jang, Y.A.; Noh, W.; Oh, Y.H.; Lee, H.; David, Y.; Baylon, M.G.; Shin, J.; Yang, J.E.; Choi, S.Y.; et al. Metabolic engineering of Ralstonia eutropha for the production of polyhydroxyalkanoates from sucrose. Biotechnol. Bioeng. 2015, 112, 638–643. [Google Scholar] [CrossRef] [PubMed]
  13. Chae, T.U.; Kim, W.J.; Choi, S.; Park, S.J.; Lee, S.Y. Metabolic engineering of Escherichia coli for the production of 1,3-diaminopropane, a three-carbon diamine. Sci. Rep. 2015, 5, 13040. [Google Scholar] [CrossRef] [PubMed]
  14. Sudheer, P.D.V.N.; David, Y.; Chae, C.G.; Kim, Y.J.; Baylon, M.G.; Baritugo, K.A.; Kim, T.W.; Kim, M.S.; Na, J.G.; Park, S.J. Advances in biological treatment of coal for synthetic natural gas and chemicals. Korean J. Chem. Eng. 2016, 33, 2788–2801. [Google Scholar] [CrossRef]
  15. Ghasemlou, M.; Daver, F.; Ivanova, E.P.; Adhikari, B. Bio-based routes to synthesize cyclic carbonates and polyamines precursors of non–isocyanate polyurethanes: A review. Eur. Polym. J. 2019. [Google Scholar] [CrossRef]
  16. Choi, S.Y.; Parks, S.J.; Kim, W.J.; Yang, J.E.; Lee, H.; Shin, J.; Lee, S.Y. One-step fermentative production of poly(lactate-co-glycolate) from carbohydrates in Escherichia coli. Nat. Biotechnol. 2016, 34, 435–440. [Google Scholar] [CrossRef] [PubMed]
  17. Chae, C.G.; Kim, Y.J.; Lee, S.J.; Oh, Y.H.; Yang, J.E.; Joo, J.C.; Kang, K.H.; Jang, Y.A.; Lee, H.; Park, A.R.; et al. Biosynthesis of poly(2-hydroxybutyrate-co-lactate) in metabolically engineered Escherichia coli. Biotechnol. Bioprocess Eng. 2016, 21, 169–174. [Google Scholar] [CrossRef]
  18. Yang, J.E.; Park, S.J.; Kim, W.J.; Kim, H.J.; Kim, B.; Lee, H.; Shin, J.; Lee, S.Y. One-step fermentative production of aromatic polyesters from glucose by metabolically engineered Escherichia coli strains. Nat. Commun. 2018, 9, 79. [Google Scholar] [CrossRef] [PubMed]
  19. Lee, J.H.; Lama, S.; Kim, J.R.; Park, S.H. Production of 1,3-Propanediol from Glucose by Recombinant Escherichia coli BL21(DE3). Biotechnol. Bioprocess Eng. 2018, 23, 250–258. [Google Scholar] [CrossRef]
  20. Li, J.; Feng, R.; Wen, Z.; Zhang, A. Overexpression of ARO10 in pdc5Δmutant resulted in higher isobutanol titers in Saccharomyces cerevisiae. Biotechnol. Bioprocess Eng. 2017, 22, 382–389. [Google Scholar] [CrossRef]
  21. Zong, H.; Liu, X.; Chen, W.; Zhuge, B.; Sun, J. Construction of glycerol synthesis pathway in Klebsiella pneumoniae for bioconversion of glucose into 1,3-propanediol. Biotechnol. Bioprocess Eng. 2017, 22, 549–555. [Google Scholar] [CrossRef]
  22. Ravikumar, S.; David, Y.; Park, S.J.; Choi, J. A chimeric two-component regulatory system-based Escherichia coli biosensor engineered to detect glutamate. Appl. Biochem. Biotechnol. 2018, 186, 335–349. [Google Scholar] [CrossRef] [PubMed]
  23. Schneider, J.; Wendisch, V.F. Biotechnological production of polyamines by Bacteria: Recent achievements and future perspectives. Appl. Microbiol. Biotechnol. 2011, 91, 17–30. [Google Scholar] [CrossRef] [PubMed]
  24. Shin, J.H.; Park, S.H.; Oh, Y.H.; Choi, J.W.; Lee, M.H.; Cho, J.S.; Jeong, K.J.; Joo, J.C.; Yu, J.; Park, S.J.; et al. Metabolic engineering of Corynebacterium glutamicum for enhanced production of 5-aminovaleric acid. Microb. Cell Fact. 2016, 15, 174. [Google Scholar] [CrossRef] [PubMed]
  25. Kim, H.T.; Kang, T.U.; Baritugo, K.; Hyun, S.M.; Kang, K.H.; Jung, S.H.; Song, B.K.; Park, K.; Oh, M.; Kim, G.B.; et al. Metabolic engineering of Corynebacterium glutamicum for the production of glutaric acid, a C5 dicarboxylic acid platform chemical. Metab. Eng. 2018, 51, 99–109. [Google Scholar] [CrossRef]
  26. Choi, J.W.; Yim, S.S.; Lee, S.H.; Kang, T.J.; Park, S.J.; Jeong, K.J. Enhanced production of gamma-aminobutyrate (GABA) in recombinant Corynebacterium glutamicum by expressing glutamate decarboxylase active in expanded pH range. Microb. Cell Factories 2015, 14, 21. [Google Scholar] [CrossRef]
  27. Baritugo, K.; Kim, H.T.; David, Y.; Khang, T.U.; Hyun, S.M.; Kang, K.H.; Yu, J.H.; Choi, J.H.; Song, J.J.; Joo, J.C.; et al. Enhanced production of gamma-aminobutyrate (GABA) in recombinant Corynebacterium glutamicum strains from empty fruit bunch biosugar solution. Microb. Cell Factories 2018, 17, 129. [Google Scholar] [CrossRef]
  28. Baritugo, K.; Kim, H.T.; Rhie, M.N.; Jo, S.Y.; Khang, T.U.; Kang, K.H.; Sog, B.K.; Lee, B.; Song, J.J.; Choi, J.H.; et al. Construction of a Vitreoscilla Hemoglobin Promoter-based Tunable Expression System for Corynebacterium glutamicum. Catalysts 2018, 8, 561. [Google Scholar] [CrossRef]
  29. Oh, Y.H.; Choi, J.W.; Kim, E.Y.; Song, B.K.; Jeong, K.J.; Park, K.; Kim, I.; Woo, H.M.; Lee, S.H.; Park, S.J. Construction of Synthetic Promoter-Based Expression Cassettes for the production of Cadaverine in Recombinant Corynebacterium glutamicum. Appl. Biochem. Biotech. 2015, 176, 2065–2075. [Google Scholar] [CrossRef]
  30. Kind, S.; Neubauer, S.; Becker, J.; Yamamoto, M.; Völkert, M.; Abendroth, G.; Zelder, O.; Wittmann, C. From zero to hero-production of bio-based nylon from renewable re-sources using engineered Corynebacterium glutamicum. Metab. Eng. 2014, 25, 113–123. [Google Scholar] [CrossRef]
  31. Kind, S.; Wittmann, C. Bio-based production of the platform chemical 1, 5-diaminopentane. Appl. Microbiol. Biotechnol. 2011, 91, 1287–1296. [Google Scholar] [CrossRef] [PubMed]
  32. Kind, S.; Jeong, W.K.; Schroder, H.; Wittmann, C. Systems-wide metabolic pathway engineering in Corynebacterium glutamicum for bio-based production of diaminopentane. Metab. Eng. 2010, 12, 341–351. [Google Scholar] [CrossRef] [PubMed]
  33. Mimitsuka, T.; Sawai, H.; Hatsu, M.; Yamada, K. Metabolic engineering of Corynebacterium glutamicum for cadaverine fermentation. Biosci. Biotechnol. Biochem. 2007, 71, 2130–2135. [Google Scholar] [CrossRef] [PubMed]
  34. Tateno, T.; Okada, Y.; Tsuchidate, T.; Tanaka, T.; Fukuda, H.; Kondo, A. Direct production of cadaverine from soluble starch using Corynebacterium glutamicum coexpressing α-amylase and L-lysine decarboxylase. Appl. Microbiol. Biotechnol. 2009, 82, 115–121. [Google Scholar] [CrossRef] [PubMed]
  35. Kim, H.T.; Baritugo, K.A.; Oh, Y.H.; Hyun, S.M.; Khang, T.U.; Kang, K.H.; Jung, S.H.; Song, B.K.; Park, K.; Kim, I.K.; et al. Metabolic engineering of Corynebacterium glutamicum for the high-level production of cadaverine that can be used for synthesis of biopolyamide 510. ACS Sustain. Chem. Eng. 2018, 6, 5296–5305. [Google Scholar] [CrossRef]
  36. Qian, Z.G.; Xia, X.; Lee, S.Y. Metabolic engineering of Escherichia coli for the production of cadaverine: A five carbon diamine. Biotechnol. Bioeng. 2011, 108, 93–103. [Google Scholar] [CrossRef]
  37. Park, S.J.; Kim, E.Y.; Noh, W.; Park, H.M.; Oh, Y.H.; Lee, S.H.; Song, B.K.; Jegal, J.; Lee, S.Y. Metabolic engineering of Escherichia coli for the production of 5-aminovalerate and glutarate as C5 platform chemicals. Metab. Eng. 2013, 16, 42–47. [Google Scholar] [CrossRef]
  38. Park, S.J.; Oh, Y.H.; Noh, W.; Kim, H.Y.; Shin, J.H.; Lee, E.G.; Lee, S.; David, Y.; Baylon, M.G.; Song, B.K.; et al. High-level conversion of L-lysine into 5-aminovalerate that can be used for nylon 6,5 synthesis. Biotechnol. J. 2014, 9, 1322–1328. [Google Scholar] [CrossRef]
  39. Park, S.J.; Kim, E.Y.; Won, N.; Oh, Y.H.; Kim, H.Y.; Song, B.K.; Cho, K.M.; Hong, S.H.; Lee, S.H.; Jegal, J. Synthesis of nylon 4 from gamma-aminobutyrate (GABA) produced by recombinant Escherichia coli. Bioprocess Biosyst. Eng. 2013, 36, 885–892. [Google Scholar] [CrossRef]
  40. Oh, Y.H.; Kang, K.H.; Kwon, M.J.; Choi, J.W.; Joo, J.C.; Lee, S.H.; Yang, Y.H.; Song, B.K.; Kim, I.K.; Yoon, K.H.; et al. Development of engineered Escherichia coli whole-cell biocatalysts for high-level conversion of l-L-lysine into cadaverine. J. Ind. Microbiol. Biotechnol. 2015, 42, 1481–1491. [Google Scholar] [CrossRef]
  41. Nishi, K.; Endo, S.; Mori, Y.; Totsuka, K.; Hirao, Y. Method for producing cadaverine dicarboxylate and its use for the production of nylon. Eur. Pat. 2006, EP1482055. [Google Scholar]
  42. Ma, W.; Cao, W.; Zhang, H.; Chen, K.; Li, Y.; Ouyang, P. Enhanced cadaverine production from L-lysine using recombinant Escherichia coli co-overexpressing CadA and CadB. Biotechnol. Lett. 2015, 37, 799–806. [Google Scholar] [CrossRef] [PubMed]
  43. Shin, J.; Joo, J.C.; Lee, E.; Hyun, S.M.; Kim, H.J.; Park, S.J.; Yang, Y.H.; Park, K. Characterization of a whole-cell biotransformation using a constitutive lysine decarboxylase from Escherichia coli for the high-level production of cadaverine from industrial grade L-lysine. Appl. Biochem. Biotechnol. 2018, 185, 909–924. [Google Scholar] [CrossRef] [PubMed]
  44. Pang, X.; Zhuang, X.; Tang, Z.; Chen, X. Polylactic acid (PLA): Research, development and industrialization. Biotechnol. J. 2010, 5, 1125–1136. [Google Scholar] [CrossRef] [PubMed]
  45. Xu, J.; Guo, B.H. Poly (butylene succinate) and its copolymers: Research, development and industrialization. Biotechnol. J. 2010, 5, 1149–1163. [Google Scholar] [CrossRef] [PubMed]
  46. Wang, C.; Zhang, K.; Zhongjun, C.; Cai, H.; Honggui, W.; Ouyang, P. Directed Evolution and Mutagenesis of L-lysine Decarboxylase from Hafnia alvei AS1.1009 to improve its activity toward efficient cadaverine production. Biotechnol. Bioprocess. Eng. 2015, 20, 439–446. [Google Scholar] [CrossRef]
  47. Beier, H.; Fecker, L.F.; Berlin, J. Lysine decarboxylase from Hafnia alvei: Purification, molecular data and preparation of polyclonal antibodies. Z. Nat. C 1987, 42, 1307–1312. [Google Scholar] [CrossRef]
  48. Hong, E.Y.; Lee, S.G.; Park, B.J.; Lee, J.M.; Yun, H.; Kim, B.G. Simultaneously Enhancing the Stability and Catalytic Activity of Multimeric Lysine Decarboxylase CadA by Engineering Interface Regions for Enzymatic Production of Cadaverine at High Concentration of Lysine. Biotechnol. J. 2017, 12, 1700278. [Google Scholar] [CrossRef]
  49. Yamamoto, Y.; Miwa, Y.; Miyoshi, K.; Furuyama, J.; Ohmori, H. The Escherichia coli ldcC gene encodes another L-lysine decarboxylase, probably a constitutive enzyme. Genes Genet. Syst. 1997, 72, 167–172. [Google Scholar] [CrossRef]
  50. Fecker, L.; Beier, H.; Berlin, J. Cloning and characterization of a L-lysine decarboxylase gene from Hafnia alvei. Mol. Gen. Genet. 1986, 203, 177–184. [Google Scholar] [CrossRef]
Polymers 11 01184 g001 550
Figure 1. Schematic diagram for proposed production of bio-nylon 510 using purified cadaverine obtained from the pyridoxal pyrophosphate (PLP)- and isopropyl β-d-1-thiogalactopyranoside (IPTG)-free whole cell bioconversion of l-lysine, which is catalyzed by recombinant E. coli strains expressing a lysine decarboxylase from H. alvei and E. coli.
Figure 1. Schematic diagram for proposed production of bio-nylon 510 using purified cadaverine obtained from the pyridoxal pyrophosphate (PLP)- and isopropyl β-d-1-thiogalactopyranoside (IPTG)-free whole cell bioconversion of l-lysine, which is catalyzed by recombinant E. coli strains expressing a lysine decarboxylase from H. alvei and E. coli.
Polymers 11 01184 g001
Polymers 11 01184 g002 550
Figure 2. Time profiles of l-lysine consumption and cadaverine production by recombinant E. coli BL21 (DE3) expressing an E. coli lysine decarboxylase (LDC) (A,C,E) and H. alvei LDC (B,D,F), respectively. The whole cell biocatalysts were concentrated to OD600 = 10 and were resuspended in a sodium acetate buffer (pH 6.0) supplemented with 0.1 mM of PLP and 0.05 mM of IPTG for the conversion of 1 M of chemical grade l-lysine substrate (Symbols: open circle, l-lysine concentration; filled triangle, cadaverine concentration).
Figure 2. Time profiles of l-lysine consumption and cadaverine production by recombinant E. coli BL21 (DE3) expressing an E. coli lysine decarboxylase (LDC) (A,C,E) and H. alvei LDC (B,D,F), respectively. The whole cell biocatalysts were concentrated to OD600 = 10 and were resuspended in a sodium acetate buffer (pH 6.0) supplemented with 0.1 mM of PLP and 0.05 mM of IPTG for the conversion of 1 M of chemical grade l-lysine substrate (Symbols: open circle, l-lysine concentration; filled triangle, cadaverine concentration).
Polymers 11 01184 g002
Polymers 11 01184 g003 550
Figure 3. Time profiles of l-lysine consumption and cadaverine synthesis by recombinant E. coli XBEcLDC (A) and XBHaLDC (B) harboring E. coli ldcC gene and H. alvei ldcC, respectively. Recombinant strains were cultivated for 24 h in anLB medium and transferred into a 250 mL flask with a PLP-free MR medium with 20 g/L of glucose and 10 g/L of chemical-grade l-lysine for further cultivation at 37 °C (Symbols: filled circle, l-lysine concentration; open circle, cadaverine concentration).
Figure 3. Time profiles of l-lysine consumption and cadaverine synthesis by recombinant E. coli XBEcLDC (A) and XBHaLDC (B) harboring E. coli ldcC gene and H. alvei ldcC, respectively. Recombinant strains were cultivated for 24 h in anLB medium and transferred into a 250 mL flask with a PLP-free MR medium with 20 g/L of glucose and 10 g/L of chemical-grade l-lysine for further cultivation at 37 °C (Symbols: filled circle, l-lysine concentration; open circle, cadaverine concentration).
Polymers 11 01184 g003
Polymers 11 01184 g004 550
Figure 4. Time profiles of l-lysine consumption and cadaverine synthesis by recombinant E. coli XL1-Blue strain harboring E. coli ldcC gene and H. alvei ldcC genes in shake flask scale whole cell bioconversion reactions. A recombinant E. coli strains seed inoculum (OD600 = 50) was prepared as whole cell biocatalysts for the conversion of 200 g/L of industrial grade l-lysine to cadaverine. Data represent mean values from three independent experiments with corresponding standard deviations. (Symbols: filled circle, l-lysine concentration; open circle, cadaverine concentration).
Figure 4. Time profiles of l-lysine consumption and cadaverine synthesis by recombinant E. coli XL1-Blue strain harboring E. coli ldcC gene and H. alvei ldcC genes in shake flask scale whole cell bioconversion reactions. A recombinant E. coli strains seed inoculum (OD600 = 50) was prepared as whole cell biocatalysts for the conversion of 200 g/L of industrial grade l-lysine to cadaverine. Data represent mean values from three independent experiments with corresponding standard deviations. (Symbols: filled circle, l-lysine concentration; open circle, cadaverine concentration).
Polymers 11 01184 g004
Table
Table 1. Lists of bacterial strains and plasmids used in this study.
Table 1. Lists of bacterial strains and plasmids used in this study.
Strain/PlasmidRelevant CharacteristicsRef.
Strain
XL1-BluerecA1 endA1 gyrA96 thi-1 hsdR17 supE44 relA1 lac [FA1proAB lacIqZΔacI Tn10 (TetR)][40]
BL21(DE3)F- dcm ompT hsdS(rBmB-) gal λ(DE3)[40]
XBHaLDCE. coli XL1-Blue with pKE112-HaLdcCThis study
XBEcLDCE. coli XL1-Blue with pKE112-EcLdcCThis study
BL21HaLDCE. coli BL21(DE3) with pET22b-HaLdcCThis study
BL21EcLDCE. coli BL21(DE3) with pET22b-EcLdcCThis study
Plasmids
pKE112-MCSExpression vector; tac promoter, Ralstonia eutropha PHA biosynthesis genes transcription terminator; Apr[40]
pKE112-EcLdcCpKE112-MCS derivative, tac promoter, the E. coli ldcC gene, AprThis study
pKE112-HaLdcCpKE112-MCS derivative, tac promoter, the H. alvei ldc gene, AprThis study
pET22b-EcLdcCpET22b-MCS derivative, T7 promoter, the E. coli ldc gene, AprThis study
pET22b-HaLdcCpET22b-MCS derivative, T7 promoter, the H. alvei ldcC gene, AprThis study
pET24ma-EcLdcCpET24ma-MCS derivative, T7 promoter, the E. coli ldcC gene, KmrThis study
pET24ma-HaLdcCpET24ma-MCS derivative, T7 promoter, the H. alvei ldc gene, KmrThis study

Share and Cite

MDPI and ACS Style

Kim, H.T.; Baritugo, K.-A.; Oh, Y.H.; Kang, K.-H.; Jung, Y.J.; Jang, S.; Song, B.K.; Kim, I.-K.; Lee, M.O.; Hwang, Y.T.; et al. High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase. Polymers 2019, 11, 1184. https://doi.org/10.3390/polym11071184

AMA Style

Kim HT, Baritugo K-A, Oh YH, Kang K-H, Jung YJ, Jang S, Song BK, Kim I-K, Lee MO, Hwang YT, et al. High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase. Polymers. 2019; 11(7):1184. https://doi.org/10.3390/polym11071184

Chicago/Turabian Style

Kim, Hee Taek, Kei-Anne Baritugo, Young Hoon Oh, Kyoung-Hee Kang, Ye Jean Jung, Seyoung Jang, Bong Keun Song, Il-Kwon Kim, Myung Ock Lee, Yong Taek Hwang, and et al. 2019. "High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase" Polymers 11, no. 7: 1184. https://doi.org/10.3390/polym11071184

APA Style

Kim, H. T., Baritugo, K. -A., Oh, Y. H., Kang, K. -H., Jung, Y. J., Jang, S., Song, B. K., Kim, I. -K., Lee, M. O., Hwang, Y. T., Park, K., Park, S. J., & Joo, J. C. (2019). High-Level Conversion of l-lysine into Cadaverine by Escherichia coli Whole Cell Biocatalyst Expressing Hafnia alvei l-lysine Decarboxylase. Polymers, 11(7), 1184. https://doi.org/10.3390/polym11071184

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop