Next Article in Journal
Poly(Vinyl Chloride) Spheres Coated with Graphene Oxide Sheets: From Synthesis to Optical Properties and Their Applications as Flame-Retardant Agents
Next Article in Special Issue
Polymer Film Blend of Polyvinyl Alcohol, Trichloroethylene and Cresol Red for Gamma Radiation Dosimetry
Previous Article in Journal
Reinforced Polymer Composites
Previous Article in Special Issue
Influence of Density on Foam Collapse under Burning
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Sonnier, R., et al. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13

by
Abdoul Fayçal Baguian
1,
Salifou Koucka Ouiminga
1,
Claire Longuet
2,
Anne-Sophie Caro-Bretelle
3,
Stéphane Corn
3,
Antoine Bere
1 and
Rodolphe Sonnier
2,*
1
Laboratoire de Physique et de Chimie de l’Environnement, Université Joseph KI-ZERBO, Ouagadougou 03 BP 7021, Burkina Faso
2
IMT—Mines Ales, Polymers Hybrids and Composites (PCH), 6 Avenue de Clavières, F-30319 Alès CEDEX, France
3
LMGC, IMT Mines Ales, Université Montpellier, CNRS, F-30319 Alès CEDEX, France
*
Author to whom correspondence should be addressed.
Polymers 2021, 13(4), 554; https://doi.org/10.3390/polym13040554
Submission received: 3 February 2021 / Accepted: 8 February 2021 / Published: 13 February 2021
(This article belongs to the Special Issue Polymer Materials Under Extreme Conditions)
The authors wish to make the following corrections to this paper [1]: in the original version of our article, the sentence “this value is close to the glass transition temperature of PU used in such foams (around 50 °C) [25]” is scientifically incorrect. The glass transition temperature indicated in the sentence (50 °C) corresponds to rigid foams rather than to flexible foams. We apologize for the original error. To correct this oversight, the sentence and reference [25] should be removed from the paper.
The authors apologize for any inconvenience caused and state that other scientific information is unaffected. The original article has been updated.

Conflicts of Interest

The authors declare no conflict of interest.

Reference

  1. Baguian, A.F.; Ouiminga, S.K.; Longuet, C.; Caro-Bretelle, A.-S.; Corn, S.; Bere, A.; Sonnier, R. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Baguian, A.F.; Ouiminga, S.K.; Longuet, C.; Caro-Bretelle, A.-S.; Corn, S.; Bere, A.; Sonnier, R. Correction: Sonnier, R., et al. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13. Polymers 2021, 13, 554. https://doi.org/10.3390/polym13040554

AMA Style

Baguian AF, Ouiminga SK, Longuet C, Caro-Bretelle A-S, Corn S, Bere A, Sonnier R. Correction: Sonnier, R., et al. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13. Polymers. 2021; 13(4):554. https://doi.org/10.3390/polym13040554

Chicago/Turabian Style

Baguian, Abdoul Fayçal, Salifou Koucka Ouiminga, Claire Longuet, Anne-Sophie Caro-Bretelle, Stéphane Corn, Antoine Bere, and Rodolphe Sonnier. 2021. "Correction: Sonnier, R., et al. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13" Polymers 13, no. 4: 554. https://doi.org/10.3390/polym13040554

APA Style

Baguian, A. F., Ouiminga, S. K., Longuet, C., Caro-Bretelle, A. -S., Corn, S., Bere, A., & Sonnier, R. (2021). Correction: Sonnier, R., et al. Influence of Density on Foam Collapse under Burning. Polymers 2020, 13, 13. Polymers, 13(4), 554. https://doi.org/10.3390/polym13040554

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop