Next Article in Journal
Effect of CuO and Graphene on PTFE Microfibers: Experimental and Modeling Approaches
Previous Article in Journal
Visual, Non-Destructive, and Destructive Investigations of Polyethylene Pipes with Inhomogeneous Carbon Black Distribution for Assessing Degradation of Structural Integrity
Previous Article in Special Issue
Geopolymers—Design, Preparation, and Applications
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Siddika et al. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071

1
School of Civil and Environmental Engineering, University of New South Wales (UNSW Sydney), Sydney, NSW 2052, Australia
2
Department of Civil Engineering, Rajshahi University of Engineering & Technology, Rajshahi 6204, Bangladesh
3
Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Alkharj 11942, Saudi Arabia
4
Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia
*
Authors to whom correspondence should be addressed.
Polymers 2022, 14(6), 1068; https://doi.org/10.3390/polym14061068
Submission received: 1 December 2021 / Accepted: 22 December 2021 / Published: 8 March 2022
(This article belongs to the Special Issue Geopolymers - Design, Preparation, Applications)
The authors wish to make the following corrections to this paper [1]: in the original version of our article, the unit of production rate of glass and waste glass was mistakenly written in “metric tons” but should be corrected to “million tons”. The corrected sentences are presented below:
In Abstract: Every year, the world is producing around 100 million tons of waste glass (WG), the majority of them are going to landfills that create massive environmental problems.
In Introduction: (first sentence of second paragraph)
Globally, around 130 million tons of glass are being produced each year among which approximately 100 million tons are being discarded as waste.
The authors apologize for this error and state that the scientific conclusions are unaffected. The original article has been updated.

Reference

  1. Siddika, A.; Hajimohammadi, A.; Mamun, M.A.A.; Alyousef, R.; Ferdous, W. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Siddika, A.; Hajimohammadi, A.; Mamun, M.A.A.; Alyousef, R.; Ferdous, W. Correction: Siddika et al. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071. Polymers 2022, 14, 1068. https://doi.org/10.3390/polym14061068

AMA Style

Siddika A, Hajimohammadi A, Mamun MAA, Alyousef R, Ferdous W. Correction: Siddika et al. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071. Polymers. 2022; 14(6):1068. https://doi.org/10.3390/polym14061068

Chicago/Turabian Style

Siddika, Ayesha, Ailar Hajimohammadi, Md. Abdullah Al Mamun, Rayed Alyousef, and Wahid Ferdous. 2022. "Correction: Siddika et al. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071" Polymers 14, no. 6: 1068. https://doi.org/10.3390/polym14061068

APA Style

Siddika, A., Hajimohammadi, A., Mamun, M. A. A., Alyousef, R., & Ferdous, W. (2022). Correction: Siddika et al. Waste Glass in Cement and Geopolymer Concretes: A Review on Durability and Challenges. Polymers 2021, 13, 2071. Polymers, 14(6), 1068. https://doi.org/10.3390/polym14061068

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop