Detection of Floating Objects on Water Surface Using YOLOv5s in an Edge Computing Environment

Abstract

Aiming to solve the problems with easy false detection of small targets in river floating object detection and deploying an overly large model, a new method is proposed based on improved YOLOv5s. A new data augmentation method for small objects is designed to enrich the dataset and improve the model’s robustness. Distinct feature extraction network levels incorporate different coordinate attention mechanism pooling methods to enhance the effective feature information extraction of small targets and improve small target detection accuracy. Then, a shallow feature map with 4-fold down-sampling is added, and feature fusion is performed using the Feature Pyramid Network. At the same time, bilinear interpolation replaces the up-sampling method to retain feature information and enhance the network’s ability to sense small targets. Network complex algorithms are optimized to better adapt to embedded platforms. Finally, the model is channel pruned to solve the problem of difficult deployment. The experimental results show that this method has a better feature extraction capability as well as a higher detection accuracy. Compared with the original YOLOv5 algorithm, the accuracy is improved by 15.7%, the error detection rate is reduced by 83% in small target task detection, the detection accuracy can reach 92.01% in edge testing, and the inference speed can reach 33 frames per second, which can meet the real-time requirements.

1. Introduction

Water is one of the most crucial components of natural resources, with a total volume of approximately 1.4 billion cubic kilometers. However, only 2.5% of this is freshwater, and within freshwater, only 0.01% is suitable for human use [1]. Rivers are freshwater resources that are relatively easy for humans to use and are important in our lives. However, with the rapid development of industry and agriculture, the self-purification ability of river water ecosystems is being seriously damaged, and ecosystem imbalances occur [2].

Water quality issues are a major challenge that humanity is facing in the twenty-first century [3]. With the accelerated process of urbanization, river water resources face contamination from various factors, such as heavy metals [4], chemical agents [5], plastic products [6,7], and more. Specifically, plastic waste entering water bodies through different pathways can result in the entanglement and ingestion of aquatic organisms, leading to death or reproductive issues among them. This, in turn, disrupts the entire aquatic ecosystem. Plastic waste can further degrade into microplastics [8,9,10], adsorbing toxic substances and causing widespread water pollution, posing a serious threat to drinking water safety. In managed water bodies like ponds, lakes, and rivers, the survival of aquatic organisms, primarily fish, is a crucial indicator in the water management system. If dead fish are not removed in time, an ammonia reaction facilitated by microorganisms and various enzymes will occur. Pathogenic bacteria carried by the dead fish, along with lipids, spread throughout the water, posing a severe threat to aquatic life, water quality, and the surrounding drinking water safety [11]. Therefore, real-time monitoring of visible floating objects on the river surface significantly enhances the efficiency of timely detection and treatment by managers. This approach can reduce the negative impact of floating pollutants on organisms, fisheries, and tourism while minimizing the threat to drinking water safety.

With the traditional method, river managers usually manually inspect or view surveillance videos to confirm the type and location of floating objects. These methods demand substantial resources and are incapable of conducting 24 h uninterrupted real-time detection. Due to the diminutive size of certain floating objects, detection errors are prone to arise during manual monitoring processes. With the application of computer vision, many fields have rapidly developed, including face recognition [12], autonomous driving [13], and medical image processing [14]. For the detection of floating objects in a river, we can use target detection based on the CNN (Convolutional Neural Network, CNN). Target detection technology mainly realizes the localization of a target, which is classified into two- and one-stage algorithms. Feature extraction is used in the two-stage algorithm, and it then generates an RP (region proposal, RP) and locality regression. These representative algorithms are R-CNN [15,16], Faster R-CNN [17,18], and SPP-Net [19], which are characterized by high accuracy. The one-stage algorithm performs localization regression directly after feature extraction. These representative algorithms are YOLO [20,21,22], SSD (Single Shot MultiBox Detector, SSD) [23,24], and RetinaNet [25], which are characterized by being fast. Many researchers have adopted different algorithms and targeted improvements according to unique business scenarios, with the main objective of improving detection accuracy or speed. In this paper, we adopt YOLOv5 [26,27] as the river drift detection algorithm. YOLOv5 has better accuracy and speed. This paper is dedicated to improving the detection effect of floating objects by improving YOLOv5. For target detection with CNN, a large number of the data samples are primary, and these samples are trained to continuously update the relevant weights to achieve better detection results. How to obtain more data that are valid samples with a limited number of datasets is the first problem we face. Then, for the specific context of the detection of floating objects on the water surface in this paper, surveillance cameras are often used to obtain data. The cameras are deployed at a certain distance from the river, and thus, more small targets are detected. Since small targets occupy fewer pixels in an image and contain less feature information, how to better extract feature information is one of the main problems that must be solved in this paper. Finally, the video transmission post-processing approach causes a certain delay, which is deployed using edge computing [28,29] in this paper. This limits the volume and computational capacities of the model due to the limited arithmetic power of the edge nodes.

Our main contributions in this article are as follows:

• An enhanced coordinate attention mechanism is incorporated into the YOLOv5 feature extraction network, and the FPN (Feature Pyramid Network, FPN) is refined to strengthen the fusion capability of feature extraction.
• The complex operators in the network are optimized for better adaptation to embedded platforms at the edge.
• A small target data augmentation method based on Mosaic is introduced to the model. The model’s robustness is improved by adding data samples containing more small targets.
• A channel-level pruning method is used to compress the model volume, which is then deployed in edge devices for testing.
• Ablation experiments were performed to verify the effectiveness of the improved model, as well as to compare and analyze the performances of different models in an edge environment.

The remainder of this article is organized as follows. Section 2 summarizes the related work on target detection, in particular, surface floating object detection. Section 3 elucidates the original network architecture of YOLOv5 and the improved YOLOv5 network in this paper. Section 4 outlines the datasets and experimental environment employed in this study. Section 5 presents the metrics utilized for network performance evaluation, training outcomes, as well as experimental results and analyses. Section 6 provides a summary and discussion of desirable improvements in this domain and outlines future work.

2. Related Works

In recent years, many researchers have used various methods to classify and detect floating objects on water surfaces. These include radar detection, wireless signals, back-ground segmentation, and deep learning, such as the method used in this paper. In this section, we will discuss and analyze the above methods. A method combining texture detection in a spatial domain and elastic detection in a frequency domain was proposed in [30]. Compared with the traditional method, the detection performance was improved, and the accuracy was higher. In terms of inference speed, the average time elapsed is 0.504 s, which cannot meet the speed of real-time detection. The authors of reference [31] used a 3D LIDAR (Light Detection and Ranging, LIDAR) method fused with a target detection network, and this can reduce the interference of the water background and improve the recognition rate. However, this method increased the deployment cost, while the low detection speed means that it could not meet the real-time requirements. The authors of reference [32] introduced a GMM (Gaussian Mixture Model, GMM)-based segmentation method for detecting floating objects on a water surface. The authors segmented the water surface floaters by improving the background update strategy and then transferred the GMM results to the HSV color space. Then, a light and shadow discriminant function was used to solve the light and shadow problems, as well as foreground smoothing. The method can effectively eliminate the effects of water surface illumination and ripples, but its detection capacity is not ideal for small targets with a relatively small number of pixel points.

In deep learning-based object detection methods, the YOLOv5 algorithm is used to detect floating objects on the water surface in [33]. In the feature extraction network, the initial topology structure is introduced to enhance feature extraction and optimize the loss function to improve the speed and accuracy of detection box regression. For waterway floating object detection, the authors of reference [34] added a feature attention mechanism to the YOLOv5s network, while enhancing the Mosaic method to improve small target detection, as well as training by extending the data. The authors experimentally demonstrated that the method could improve the detection accuracy, and the detection speed could reach 42 FPS (Frames Per Second, FPS). However, in edge devices, the computational power is limited, and further validation is needed to see if the detection speed can meet the real-time requirements. The real-time detection of surface floating objects using an improved RefineDet model was proposed in [25]. Deep-level feature extraction was added, and the feature fusion was performed to improve the detection accuracy. The anchor point parameters were adjusted to match the multi-scale objects, and a focal loss function was introduced to solve the foreground–background imbalance problem. The authors of reference [35] improved the YOLOv3 algorithm to address the deployment and application of floating object detection algorithms on embedded devices such as drones. They used a MobileNet network instead of Darknet53 as the backbone network to reduce model parameters and computational complexity, and obtained more accurate and representative prior boxes for prior box clustering. The authors of reference [36] improved the localization accuracy of YOLOv3 by improving the k-means clustering algorithm to obtain a priori frames. Category activation mapping replaced the bounding box-based localization method with pixel point-based localization. While this method effectively reduced the target localization errors, the model’s weight was not sufficiently light enough for practical deployment and use. The authors of reference [37] provided a dataset on floating debris on water surfaces and improved the ability to detect small objects by adding feature and detection layers of different scales to mainstream object detection network models. The above methods are feasible for surface floating object detection, but the deep learning-based target detection method is more convenient and efficient than the other methods are. However, different strategies need to be developed for different application scenarios. In this paper, we improve the YOLOv5s network to solve a small target detection problem (partial research results were published in the IEEE international symposium on broadband multimedia systems and broadcasting BMSB 2023 [38]) and improve the detection accuracy. This enables the YOLOv5 network to achieve a detection accuracy of 93.6% for small targets, with a detection speed of 36 FPS. The model is also channel pruned, as well as deployed on an edge-computing platform to determine the model’s performance. This makes the improved network in this paper similar to practical applications and it obtains more reference experimental data.

3. Methods

3.1. Yolov5 Network Structure

The YOLOv5s model is among the smallest variants in terms of depth and width compared to other versions. The network structure is divided into four components: input, backbone, neck, and prediction. The YOLOv5s network structure is illustrated in Figure 1.

The input section primarily handles image scaling and normalization. The backbone comprises the Focus structure and CSP (Cross Stage Partial, CSP). YOLOv5 incorporates two CSP structures: CSP1_X in the backbone and CSP2_X in the neck. These structures enhance the model’s learning capability, allowing it to maintain accuracy while remaining lightweight. The neck utilizes an FPN + PAN (Pyramid Attention Network, PAN) structure. FPN employs a top-down approach, transmitting feature information from higher layers through up-sampling and fusion to generate feature maps for predictions. In contrast, PAN aggregates strong localization features from various backbone layers to different detection layers. GIOU (Generalized IoU, GIOU)_Loss serves as the bounding box loss function on the prediction side, based on IOU (Intersection over Union, IOU), addressing issues when bounding boxes lack overlap. In the post-processing phase of target detection, NMS (Non-Maximum Suppression, NMS) is employed to improve the recognition of targets with overlapping occlusion.

3.2. Improved YOLOv5 Network

The original YOLOv5 network is improved to identify floating debris in rivers. The improved YOLOv5 network flowchart is shown in Figure 2. A Small Target Data Augmentation module has been added to the input module of YOLOv5, providing a more complex background and more samples for the dataset. The coordinate attention mechanism is added in the Backbone module to reduce the interference of redundant information. Simultaneously, we enhance the original Feature Fusion Network of YOLOv5, improving the network’s capability to extract features from small targets. Additionally, to better suit embedded development platforms, optimizations and pruning of certain operators in the network are performed to enhance the detection capability when deploying the network at the edge. The specific description of the improved YOLOv5 network is as follows.

3.2.1. Small Target Data Augmentation

Traditional data augmentation methods enhance the dataset by applying operations such as mirror flipping, scaling, and contrast enhancement to the images. The CutMix [39] algorithm stitches two images before feeding them into the neural network for training. In addition, the Mosaic [40] algorithm of YOLOv5s stitches four images so that the synthetic image contains multiple targets at different scales. To address the problem of small targets being easily missed and mistakenly detected in application scenarios, this paper proposes a data augmentation method, STDA (Small Target Data Augmentation, STDA), for small target training using the Mosaic algorithm. The STDA process [41] is shown in Figure 3.

The procedure initiates with the fusion of four original images, followed by random scaling down and the application of data augmentation operations, such as flipping and merging. Subsequently, the two synthetic images are combined in a way that aligns their center points. Finally, a fixed-size selection box is utilized to extract the new sample. This newly created sample image encompasses a broader spectrum of small target classes and introduces a more intricate training context compared to the original image. Consequently, it facilitates effective training without requiring a large hyperparameter batch size, thereby enhancing the training efficiency of the network model and reducing computational overhead.

3.2.2. Feature Extraction Network Incorporating Coordinate Attention Mechanism

SE (Squeeze and Excitation, SE) [42] and CBAM (Convolutional Block Attention Module, CBAM) [43] are both widely used attention mechanisms. However, their fundamental idea revolves around the limitation of simple convolution operations in capturing long-range dependencies essential for visual tasks, as they primarily focus on processing local neighborhoods. The proposed CA (Coordinate Attention, CA) can effectively solve the above problems. The CA module aggregates the features and fuses them along horizontal and vertical directions, respectively, which not only captures remote dependencies, but also retains precise location information and can better capture the overall structural information of the target.

Although the targets at different scales are detected by extracting features at different levels using the YOLOv5s network, there are still problems, such as interference of complex backgrounds with feature extraction for the detection of river floaters. Therefore, to address the problem of small target floating objects in rivers containing less feature information and being easily disturbed by background factors, this paper proposes to incorporate the CA module in the feature extraction network CSP-Darknet of YOLOv5s. Since the shallow feature maps contain a lot of useless background information, the deep feature maps contain a lot of local feature target information. In this investigation, we adapt the pooling operation of the CA module to suit diverse layers of feature maps. This adaptation introduces a novel coordinate attention mechanism, denoted as MCA (Max-pooling Coordinate Attention, MCA), utilizing maximum pooling. The MCA pooling layer is shown in Figure 4.

The CA module first embeds coordinate information along two-dimensional directions for feature map pooling encoding. For each channel x_c of the input feature map X of dimension (C, H, W), a global averaging pooling operation is performed along the horizontal and vertical directions. Respectively, to obtain two one-dimensional feature codes, where C, H, and W denote the number of channels, the height, and the width of the feature map, and the pooling kernels of (H, 1) and (W, 1) are used in the horizontal (X-axis) and vertical (Y-axis) directions, respectively. The specific calculations are shown in Equations (1) and (2).

$$z_c^h(h)=\frac{1}{W}{\displaystyle \sum _{0\le i<W}{x}_c(h,i)}$$

(1)

$$z_c^w(w)=\frac{1}{H}{\displaystyle \sum _{0\le j<H}{x}_c(j,w)}$$

(2)

Using the concatenate mechanism, the row vector undergoes transposition, and is then concatenated with the column vector. This concatenated vector subsequently undergoes a series of operations, including 1 × 1 convolution, BN (Batch Normalization, BN), and nonlinear activation, adhering to scientific writing conventions. The 1 × 1 convolution operation is used for channel compression. The calculation is shown in Equation (3).

$$f=\delta (F_1([z^h;z^w]))$$

(3)

where [z^h;z^w] denotes the transposition, followed by splicing along the spatial dimension; δ represents the nonlinear activation function; F₁ represents the convolutional transform function; and the generated f represents an intermediate feature mapping encoding both the horizontal and vertical directions.

Two feature vectors $f^h\in R^{\mathrm{C}/r\times H}$ and $f^w\in R^{C/r\times W}$, are split along the spatial dimension, and then 1 × 1 convolution and nonlinear activation operations are performed on these two feature vectors. The hyper-parameter r introduced here denotes the compression rate, and controls the depth of the output feature map by varying the number of convolution filters. Then, 1 × 1 convolution is used to adjust the number of channels in $f^h$ and $f^w$, which are consistent with the input feature map X. The calculations are shown in Equations (4) and (5).

$$g^h=\sigma (F_h(f^h))$$

(4)

$$g^w=\sigma (F_w(f^w))$$

(5)

where $F_h$ and $F_w$ denote the convolutional transform functions of $f^h$ and $f^w$, respectively, and $\sigma$ denotes the Sigmoid activation functions. Finally, $g^h$ and $g^w$ are used as attention weights, which are multiplied by the corresponding channels of the input feature map X to generate the final attention-weighted feature map. The weighted calculation is shown in Equation (6).

$$y_c(i,j)=x_c(i,j)\times g_c^h(i)\times g_c^w(j)$$

(6)

The YOLOv5 network builds an FPN by extracting three feature layers. Due to the high resolution of the feature map obtained by the shallow network, which contains rich, local information, it can capture more information about the small targets.

In this study, we introduce a feature extraction layer with dimensions (160, 160, 128) into the YOLOv5 network’s feature extraction module to enhance the detection of small targets. Then, the CA and MCA modules are inserted after each of the four feature layers, and the insertion positions are shown in Figure 5.

3.2.3. Optimized Feature Fusion Network

In CNN, different convolutional layers can extract different target feature information through convolutional operations. Integrating information from feature maps with varying scales is advantageous for distinguishing targets, effectively addressing the challenge of target scale variations, and enhancing the network’s detection performance. In the YOLOv5s network, the FPN transmits high-level semantic information in a top-down fashion. Additionally, a bottom-up pyramid is employed to convey location information, improving feature fusion across different layers and augmenting the network’s capacity to learn features.

For small target detection, an excessively high sampling rate can result in the loss of feature information, thereby affecting the detection effectiveness. In the previous subsection, we added a feature layer of size (160, 160, 128) to the feature extraction network. The 4× down-sampling rate retains more target feature information than the other high sampling rates do. As shown in Figure 6, we combine the added feature layer with the other three original feature layers to construct a new Feature Pyramid Network.

The up-sampling operation in the FPN network uses the nearest-neighbor interpolation algorithm. Although this algorithm is simple, there are obvious mosaic and jagged phenomena, which cause a large reduction in image quality. However, this undoubtedly increases the difficulty of detection for small targets that occupy fewer pixel points. In this paper, we adopt the bilinear interpolation method instead of the nearest-neighbor interpolation method. The bilinear interpolation method considers the influence of correlation among the four surrounding neighboring points during the calculation process. This effectively addresses the limitation of discontinuous nearest-neighbor interpolation.

3.2.4. Network Optimization for Edge Devices

In the embedded devices at the edge, convolution operations can be better adapted, and small size convolutions have a faster computational speed than large size convolutions do. In YOLOv5, the Focus module is designed to retain more image information. However, due to the fact that this information is located at a lower level, its practical application has a limited impact on improving the network’s detection accuracy. Additionally, most chip manufacturers do not provide a Focus interface, which hinders the conversion and deployment of the YOLOv5 model. To achieve better hardware support, we opt to replace the Focus module with a convolutional layer of stride 2 and size 6 × 6. As shown in Figure 7, the comparative results indicate that both approaches possess computational capabilities, and the convolutional layer has fewer parameters.

The SPP (Spatial Pyramid Pooling, SPP) module initially reduces the input channels by half using a convolutional module. Subsequently, it performs three parallel max-pooling operations on the feature map, followed by concatenating and merging these results with the original features. Finally, it enlarges their size using a convolutional module, with filter sizes of 5, 9, and 13; larger filter sizes require more computation and parameters. Small filter sizes have a smaller receptive field, and using small-size pooling directly instead of large-size pooling may lead to the loss of global information, affecting the network’s detection performance. In this study, we use 2, 3, and 5 consecutive 3 × 3 pooling layers in the SPP module to replace 5 × 5, 9 × 9, and 13 × 13 pooling, respectively.

3.2.5. Model Pruning

The network depth and width of YOLOv5s are only about 1/3 and 1/2 as large as those of the standard network, respectively. Nevertheless, the model continues to impose computational demands on edge nodes that have restricted computational resources. The direct deployment of the model does not result in the best detection performance, and it is difficult to meet the real-time requirements of business scenarios. Model pruning [44] can compress the model’s size and improve its inference speed. Unstructured pruning is computationally inefficient and often necessitates specific software or hardware accelerators for implementation. On the other hand, the fine-grained, excessively conservative pruning approach lacks flexibility and complicates control of the scale of the pruning process. In this paper, we employ structured channel-level pruning [45]. This method correlates the scale of the BN layer with those of the convolutional channels and selectively prunes a certain percentage of channels, using it as an indicator to identify the important channels.

The CBL (Convolutions with Batch Normalization and Leaky, CBL) modules in the YOLOv5s network mainly consist of three components: the convolutional and BN layers, and the ReLU (Rectified Linear Unit, ReLU) activation function. These components are responsible for performing convolution, normalization, and activation operations. According to the above method, we prune the convolutional layers in all the CBL modules. Firstly, the following transformation is performed on the BN layer, as shown in Equation (7).

$$\widehat{x}=\frac{x-{\mu }_{{\rm B}}}{\sqrt{{\sigma }_B^2+\epsilon }}; y=\gamma \widehat{x}+\beta$$

(7)

Using the parameter in the BN layer as the required scale for pruning, this will not impose an additional overhead on the network. x and y represent the inputs and outputs of the BN layer. B = {x₁, x₂,…, x_n} indicates the current small batch; μ_B and σ_B represent the mean and standard deviation of the input activation degree pair B, respectively; γ and β represent the trainable affine transformation parameters with respect to scale and displacement, respectively. Jointly training the network weights and these scale factors with sparse regularization involves adding the L1 regularity constraint, as depicted in Equation (8).

$$L={\displaystyle \sum _{(x,y)}l(f(x,W),y)+\lambda {\displaystyle \sum _{\gamma \in \Gamma }g(\gamma )}}$$

(8)

where (x, y) denotes the training input and target, respectively; W denotes the trainable weights; the first sum denotes the network normal training loss function; and the second sum is the regularization of the scale factor. In this paper, we set g(λ) = |λ|, where λ is penalized sparsity, and we used it to balance the two terms. After channel-level sparse training, a model with many scale factors close to zero is obtained, as shown in Figure 8a; then, we prune these channels with scale factors close to zero. Finally, we remove the input–output connections of these channels and the corresponding weights to obtain a more compact model (as shown in Figure 8b).

For the YOLOv5s model used in this paper, we control the ratio by controlling the size of the threshold T in the pruning process. For different datasets, the pruning effect will be different. For the dataset used in this article, after pruning 55% of the convolutional channels, the network detection accuracy and speed are very balanced. Therefore, the pruning threshold in this article is set to 0.55.

4. Dataset and Experimental Environment

4.1. Datasets

In this paper, the dataset was mainly collected through the Internet and obtained by taking our own photographs. The dataset in this paper contains 10,100 images of floating objects, including four categories of plastic bottles, plastic bags, water plants, and dead fishes. After the dataset was labeled with the labeling tool, the training, validation, and test sets were divided in a ratio of 8:1:1, as shown in

Table 1. Float dataset.

Classes	Training Set	Validation Set	Test Set
Bottles	3280	410	410
Plastic bags	2560	320	320
Planktonic algae	1200	150	150
Dead fishes	1040	130	130

, and a sample of the main categories of the dataset [38] is shown in Figure 9.

4.2. Experimental Environment

To verify the effectiveness of the improvements to the YOLOv5 network in Section 3 and the performance of the model in real deployment applications, two experimental environments are set up in this paper. The first of these is a network model training environment, where the effectiveness of each improvement module is verified in ablation experiments. The second one is an edge deployment environment, in which the performances of the different models are compared and analyzed. The test results are presented in the next section. The main environment configuration and parameters are shown in

Table 2. Main environment configuration and parameters.

Environment	System and Hardware	Version and Hardware Model
Training environment	Systems	Ubuntu18.04
	Graphics card	GeForce RTX 3090
	Framework	Pytorch
Edge test environment	Data collection equipment	2 Megapixel 1/1.8” CMOS Smart Capture Camera
	Embedded chips	Hi3519AV100

.

In this paper, we use a network model based on edge computing to deploy surveillance cameras around a river to collect data and use SOCs (Systems on a Chip, SOCs) to provide arithmetic support to realize the analysis and inference of the data. We chose Hi3519AV100 from HISILICON (Shenzhen, China) as the edge node data processing unit. This is mainly used in surveillance IP cameras, aerial drones, and many other products. It also has a 2.0 Tops neural network computing performance, a dual-core CORTEX-A53 + IVE, a hardware acceleration unit NNIE (Neural Network Inference Engine, NNIE), and a DSP (Digital Signal Processor, DSP), supporting deep learning. Where 1.8” in Table 2 means 1.8 inches CMOS stands for Complementary Metal Oxide Semiconductor.

5. Results and Discussion

5.1. Evaluation Metrics

YOLO introduces the notion of an objectivity (confidence) score, reflecting the network’s confidence in the presence of an object within a designated bounding box. A prediction is deemed a TP (True Positive, TP) if it satisfies the following criteria: the objectivity score exceeds or equals the confidence threshold, the predicted category aligns with the true label, and the IOU within the true category surpasses or equals the IOU threshold. If either of the latter two conditions do not hold, the prediction is a FP (False Positive, FP). IOU is a metric used to evaluate the correctness of a bounding box, and it represents the ratio of the intersection of the detection box to the ground truth and the merged part. The experimental part of this paper introduces four metrics, precision, recall, mAP (Mean Average Precision, mAP), and FPS, as quantitative criteria for judging the effectiveness of the detection of the model, and the detection results are analyzed and compared. Precision represents the percentage of TPs in all the predictions, and recall represents the percentage of FPs in floating object detection. The mAP measures the ability of the trained model to detect targets in all the classes. As a frame rate per second, the FPS indicates the number of images that are processed per second to evaluate the speed of object detection. Mathematically,

$$IoU=\frac{D\cap G}{D\cup G}$$

(9)

$$Precision=\frac{TP}{TP+FP}$$

(10)

$$Recall=\frac{TP}{TP+FN}$$

(11)

$$mAP=\frac{{\displaystyle {\sum }_{i=1}^{k}A{P}_i}}{K}$$

(12)

where D denotes the detection frame, and G denotes the ground truth; FP and FN are false positives and negatives, respectively. The AP calculation can be defined as the area contained by the interpolated precision–recall curve on the X-axis. This approach is called: AUC (Area Under the Curve, AUC). K represents the number of target classes.

5.2. Network Training

During the training process, we set the number of iterations to 300, the weight decay coefficient to 0.0001, the learning rate momentum to 0.937 for mitigating model overfitting, and the maximum training batch to 32. The dynamics of precision, recall, and mAP are illustrated in Figure 10, with the horizontal axis representing the number of training steps and the vertical axis indicating the magnitude of each value.

Figure 11 illustrates the loss function curve, with the lower values indicating a better performance; the ideal value is 0. As the number of training iteration steps increases, the loss consistently decreases, stabilizing after 300 rounds. When the classification loss decreases, this means that the classification prediction becomes more similar to the label, which indicates more accurate classification. When the box loss decreases, this means that the error between the predicted and labeled boxes becomes smaller.

5.3. Experimentation and Analysis

For the improvement of the YOLOv5s network structure, we conduct the following ablation experiments to verify the effectiveness of the proposed method: original network and comparative experiments, involving adding CA and CA + MCA, respectively; ablation experiments on each improved module in the network in this paper; comprehensive performance comparison experiments on the different network models in the edge environments.

In this paper, we incorporate CA and MCA in feature layers at different depths, respectively, to focus on the different levels of feature information. To verify the effectiveness of the CA module on the original network and its ability to enhance the network after adding the MCA module, we conduct the following experiments. Firstly, 200 images with 507 small target annotations are selected as the small target test set. The error detection rate is the performance indicator in this test. The error detection rate represents the ratio of the number of mistakenly detected and missed small target objects to the total number of small targets. The test results are shown in

Table 3. Comparison of CA and MCA module ablation experiments.

CA	MCA	Error Detection/pc	Error Detection Rate/%	Model Size/MB
○	○	18	0.035	14.10
●	○	5	0.009	14.82
●	●	3	0.006	14.82

.

From the above data, it is clear that the original network is not ideal for small target detection, with 18 wrongly detected targets, and a false detection rate of 0.035%. The error detection rate decreased by 0.026 percent after adding CA, and after replacing shallow CA with MCA, the error detection rate decreased by another 0.003 percent due to the addition of CA. With the addition of the attention mechanism, the mode size increased. In this paper, by changing some CA modules to MCA modules, this only creates a difference in the method of feature extraction and does not increase the model size, while improving the detection effect. This shows that the data in this paper can effectively enhance the detection capability of the network for small targets by incorporating a coordinate attention mechanism.

For the same homemade floater dataset, a second experiment is conducted, which involves ablation, incorporating each improvement module in the YOLOv5s network. According to the analysis of the data in

Table 4. Comparison of the results of the improved module ablation experiment.

No.	CA + MCA	New FPN	STDA	Precision	[email protected]:0.95	Recall
1	○	○	○	0.8104	0.5213	0.8251
2	●	○	○	0.8513	0.5767	0.8259
3	○	●	○	0.8298	0.5260	0.8301
4	○	○	●	0.8368	0.5391	0.7914
5	●	●	○	0.8730	0.5669	0.8509
6	●	○	●	0.8797	0.5772	0.8760
7	○	●	●	0.8414	0.5405	0.8590
8	●	●	●	0.9376	0.5962	0.9081

, it is clear that the improved modules in this paper all have differently improved detection accuracies. The inclusion of the attention mechanism caused the largest improvement in accuracy, with a 4.09 percentage increase. In the test after the incorporation of all the modules, the accuracy reached a maximum of 93.76%. Table 3 lists the performance indexes after incorporating each improved module in YOLOv5s, respectively. Combining all the data, the improved modules in this paper can effectively enhance the detection accuracy of YOLOv5s. It is evident that, compared to the original network, the improved algorithm in this paper exhibits superior performance in the test on small target floating objects in the river.

The third experiment deploys the original and improved networks separately in the edge test for comparative performance analysis. The test results are shown in

Table 5. Performance of different networks in edge testing.

Algorithms	Precision	FPS	Model Size/MB
YOLOv5s	0.8059	13	14.10
SSD300	0.8002	2	90.06
Faster R-CNN	0.8490	0.62	165.80
EfficientDet [46]	0.7801	6.4	16.22
Our Method	0.9201	33	4.31

.

Mainly the original networks with and without channel pruning, and the improved networks with and without channel pruning are tested in this paper. In this paper, the network model not only requires a high accuracy and efficiency, but also a balance between accuracy and speed to make the system work better. Analysis shows that for the edge nodes with a limited arithmetic power, the oversized Fast R-CNN and SSD can perform correctly, but the inference speed is too slow to meet the real-time requirement. EfficientDet is a lightweight, scalable detection network, and it contains a total of eight models; the accuracy and time complexity of the model increases with the model size [46]. As a small object detection network, EfficientDet has a slightly higher computational cost than that of YOLOv5s, while its detection accuracy is also lower than that of YOLOv5s. The pruned network compressed the volume by 69% and improved the detection speed at the edge end 1.53 times, achieving an FPS of 33 and enabling real-time detection. The pruned network reduced the detection accuracy by 1.75% compared to that of the training end of the network. The small accuracy loss is acceptable when considering the speed improvement.

6. Conclusions

To ensure both the inference speed and accuracy of the YOLOv5 network at the edge, this study has introduced improvements to the model, and the effectiveness of these modifications has been validated through ablation experiments. The improved model outperforms the other models in terms of its detection accuracy and speed by deploying different models to compare and analyze various performance metrics. In this paper, using the improved model, it achieved a 92.01% correction rate at the edge end and an inference speed of 33 FPS, which meet the real-time performance. It provides a feasible solution for the embedded deployment of river floating object detection.

In the future, we may face challenges posed by larger datasets or more intricate water surface environments. For the enhanced YOLOv5 network model in this study, the next crucial step involves improving the model’s capacity to handle noise information, thereby addressing the dynamic nature of external environments. Furthermore, we will conduct operator optimizations specifically tailored for designated embedded platforms to elevate the overall model’s performance. Building upon the enhancements achieved in this study for the YOLOv5 network model, our future endeavors will focus on utilizing YOLOv5 as the foundational unit of embedded platforms, contributing to the development of an edge-coordinated target detection network.