Next Article in Journal
The QCD Adler Function and the Muon g − 2 Anomaly from Renormalons
Previous Article in Journal
Stability of Boundary Value Discrete Fractional Hybrid Equation of Second Type with Application to Heat Transfer with Fins
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

The Characterizations of Parallel q-Equidistant Ruled Surfaces

1
School of Mathematics, Hangzhou Normal University, Hangzhou 311121, China
2
Department of Mathematics, Ordu University, Ordu 52200, Turkey
*
Author to whom correspondence should be addressed.
The authors contributed equally to this work.
Symmetry 2022, 14(9), 1879; https://doi.org/10.3390/sym14091879
Submission received: 29 July 2022 / Revised: 2 September 2022 / Accepted: 5 September 2022 / Published: 8 September 2022
(This article belongs to the Section Mathematics)

Abstract

:
In this paper, parallel q-equidistant ruled surfaces are defined such that the binormal vectors of given two differentiable curves are parallel along the striction curves of their corresponding binormal ruled surfaces, and the distance between the asymptotic planes is constant at proper points, which is related to symmetry. The characterizations and some other useful relations are drawn for these surfaces as well. If the surfaces are considered to be closed, then the integral invariants such as the pitch, the angle of the pitch, and the drall of them are given. Finally, some examples are presented to indicate that the distance between the proper points on the corresponding asymptotic planes is always constant.

1. Introduction and Preliminaries

In 3-dimensional Euclidean space, the surfaces generated by the motion of lines along a given curve are called as ruled surfaces [1,2,3]. As these surfaces are easy to handle by means of their mathematical formulation, they are used in many fields, such as architectural design, computer aided geometric design and kinematics. The basic theory behind the ruled surfaces and their associations on the relative fields can be found in many textbooks [1,2,3,4,5,6]. In 1986, Valeontis defined parallel p-equidistant ruled surfaces such that the generator vectors of two ruled surfaces are parallel along their striction curves, and the distance between the polar planes is constant [7]. After this conceptualization, researchers studied such ruled surfaces by means of their generalizations and geometric properties, such as integral invariants, shape operators, spherical indicatrix and the corresponding relations among them [8,9,10,11,12,13]. There are other studies that coined this practice by using other frames in different spaces [14,15,16,17]. Furthermore, the dual expression of parallel p-equidistant ruled surfaces was introduced in [18]. In addition to these, the notion of parallel z-equidistant ruled surfaces was given by As and Şenyurt, by which, this time, the principal normal vectors are considered to be parallel along the striction curves and the distance between the corresponding two central planes is constant at proper points, and these are all related to symmetry [18,19].
Motivated by these studies, in this paper, we address and introduce parallel q-equidistant ruled surfaces such that the binomial vectors of the base curve are parallel along their striction curves of two ruled surfaces and the distance between asymptotic planes is constant. We then provide some characteristics of these new q-equidistant ruled surfaces. For the case in which the ruled surfaces are closed, we compute the corresponding integral invariants and the relations among them.
Let r = r ( t ) be a regular unit speed curve in E 3 . By regular, we mean the curve is at least C 2 . A ruled surface is then defined as the motion of the line X = X ( t ) along the curve r ( t ) . Thus, we parameterize it as follows:
φ X t , v = r t + v X t .
When we denote { T , N , B , κ , τ } as the Frenet apparatus of the curve r ( t ) , then the corresponding Darboux vector is given by W = τ T + κ B . If θ is taken to be the angle between the binormal vector and Darboux vector, then we form the unit Darboux vector as follows:
C = sin θ T + cos θ B , cos θ = κ κ 2 + τ 2 , sin θ = τ κ 2 + τ 2
Let r = r ( t ) be a closed curve in E 3 ; then the Steiner rotation and Steiner translation vectors are
D = T r τ d t + B r κ d t , V t = T r d t ,
respectively. Moreover, if φ X t , v is a closed ruled surface and X ( t ) is a unit vector, then the striction curve, drall, pitch and the angle of the pitch are given as
γ = r r , X X 2 X t , P X = det r , X , X X 2 , λ X = D , X , L X = V , X ,
respectively. If, instead of X ( t ) , one of the vectors of Frenet frame is considered to be as the generator line for a closed ruled surface, then the pitch, the angle of pitch and the distribution parameter for each case are shown as in the following:
λ T = r τ d t , λ N = 0 , λ B = r κ d t , L T = r d t , L N = L B = 0 , P T = 0 , P N = τ κ 2 + τ 2 , P B = 1 τ .
The planes with subspaces S p T , N , S p N , B and S p T , B along the striction curves of a ruled surface are called the asymptotic plane, polar plane and central plane, respectively [20].

2. Characteristics of q -Equidistant Ruled Surfaces

In this section, we first define q-equidistant ruled surfaces by following Valeontis’s introduction [7]. We then provide some relations between their Frenet elements and compute distance function. Finally, we present a couple of examples to denote that the corresponding distances are constant for various cases.
Definition 1.
Let r ( t ) and r * t be any two curves in E 3 and denote their corresponding unit binormal vectors as B and B * , respectively. If the two ruled surfaces defined as φ B t , v = r t + v B t and φ B * t , v = r * t + v B * t satisfy the following two conditions:
  • the binormal vectors are parallel along the striction curves;
  • the distance between two proper points on asymptotic planes is constant,
then the pair of these ruled surfaces φ B , φ B * are called q-equidistant ruled surfaces:
Theorem 1.
The relations among the Frenet vectors of the base curve of q-equidistant ruled surfaces φ B t , v and φ B * t , v are given
T * = cos ϕ T sin ϕ N , N * = sin ϕ T + cos ϕ N , B * = B
where T , T * = ϕ .
Proof. 
Rewrite T * as T * = a 1 T + b 1 N + c 1 B . Since B B * , we have a 1 = cos ϕ , b 1 = sin ϕ and c 1 = 0 . Upon substitution, T * = cos ϕ T sin ϕ N , and similarly N * = sin ϕ T + cos ϕ N . □
Theorem 2.
The relations between the two curvatures of the base curves of q-equidistant ruled surfaces are
κ * = κ 1 d t d t * , τ * = τ cos ϕ d t d t * .
Proof. 
By taking the derivative of T * and N * , we have
T * = sin ϕ + κ sin ϕ d t d t * T + cos ϕ + κ cos ϕ d t d t * N + τ sin ϕ d t d t * B , N * = cos ϕ κ sin ϕ d t d t * T + κ sin ϕ sin ϕ d t d t * N + τ cos ϕ d t d t * B .
Using the advantage of the definitions of curvatures κ * = T * , N * and τ * = N * , B * completes the proof. □
Theorem 3.
The relations between the striction curves of the q-equidistant ruled surfaces are
γ * = γ + p T + z N + z + p κ τ B .
Proof. 
From the given relation (4), the striction curves are found to be the same as the base curves of two ruled surfaces; that is, γ ( t ) = r ( t ) and γ * ( t ) = r * ( t ) . Note that, as a consequence of this, we may re-express the ruled surfaces as in the following way:
φ B t , v = γ t + v B t and φ B * t , v = γ * t + v B * t
Now, if we denote p , z and q as the distances between polar, central and asymptotic planes in respective order, then the striction curve γ * can be rewritten as
γ * = γ + p T + z N + q B .
Conversely, if we consider γ and γ * as the base curve, then we may write this time r * = r + p T + z N + q B . By taking the derivative of the this and applying the inner product for both sides by B * , we have
r * , B = κ τ p τ τ + τ 2 q .
By referring the relation (4) and considering that γ t = r t , the proof is complete. □
Corollary 1.
The distance between the asymptotic planes of q-equidistant ruled surfaces is given by the following relation:
q = z + κ p τ .
Example 1.
Let us consider the two following helical curves parameterized as
r t = 1 2 sin t , 1 2 cos t , t 2 and r * t = 4 2 + 1 2 sin t , 4 2 + 1 2 cos t , t 2 .
The binormal vector fields of these and the corresponding ruled surfaces are given as
B t = B * t = 1 2 cos t , 1 2 sin t , 1 2 , φ B t , v = 1 2 sin t , 1 2 cos t , t 2 + v 1 2 cos t , 1 2 sin t , 1 2 , φ B * t , v = 4 2 + 1 2 sin t , 4 2 + 1 2 cos t , t 2 + v 1 2 cos t , 1 2 sin t , 1 2 .
The striction curves of the ruled surfaces φ B t , v and φ B * t , v are
γ t = 1 2 sin t , 1 2 cos t , t 2 and γ * t = 4 2 + 1 2 sin t , 4 2 + 1 2 cos t , t 2 .
Since γ γ * = γ * γ , we have γ γ * = 4 2 , 4 2 , 0 . In this case, the distances between polar and central planes denoted by p and z can be calculated by p = 4 cos t 4 sin t and z = 4 2 sin t 4 2 cos t , respectively. When the derivative of z is substituted in (9), we have the final parametric form for the distance q as below:
q = 4 cos t 4 sin t .
By referring the classical definition of planes, we define two of asymptotic planes as in the following way:
H γ X , B = 0 x cos t y sin t z + 2 2 t = 0 , H * γ * X * , B * = 0 x cos t y sin t z + 4 2 sin t cos t + 2 2 t = 0
  • For t = 0 , the striction points, the binormal vectors, the asymptotic planes and the q distance are computed as
    γ 0 = 0 , 1 2 , 0 , γ * 0 = 4 2 , 9 2 , 0 , B 0 = 1 2 , 0 , 1 2 , B * 0 = 1 2 , 0 , 1 2 , H x z = 0 , H * x z 4 2 = 0 , q = 4 .
    Now, let us take two proper points from two asymptotic planes as A a , 0 , a H and B b , 0 , b 4 2 H * . Since the distance q = 4 , we can establish a relation for a and b as b a = 2 2 . For a = 2 and b = 3 2 , we have A 2 , 0 , 2 and B 3 2 , 0 , 2 . (See Figure 1).
  • For t = π 6 , the striction points, the binormal vectors, the asymptotic planes and the q distance are computed as
    γ π 6 = 1 2 2 , 3 2 2 , π 6 2 , γ * π 6 = 17 2 2 , 16 + 3 2 2 , π 6 2 , B π 6 = 3 2 2 , 1 2 2 , 1 2 , B * π 6 = 3 2 2 , 1 2 2 , 1 2 , H 6 3 x 6 y 12 z + 2 π = 0 , H * 6 3 x 6 y 12 z + 12 2 12 6 + 2 π = 0 , q = 2 3 2 .
    Similarly, when taken proper points from both asymptotic planes such as
    A a 1 , a 2 , 3 2 a 1 1 2 a 2 + 2 π 12 H and
    B b 1 , b 2 , 3 2 b 1 1 2 b 2 + 2 2 2 6 + 2 π 12 H * , we may write
    b 1 a 1 2 + b 2 a 2 2 + 3 2 b 1 a 1 1 2 b 2 a 2 + 2 2 2 6 2 = 2 3 2 2 .
    If λ 1 = b 1 a 1 and λ 2 = b 2 a 2 , then we can rewrite the last relation as
    7 λ 1 2 + 5 λ 2 2 2 3 λ 1 λ 2 + 8 6 24 2 λ 1 + 8 6 8 2 λ 2 + 64 32 3 = 0 .
    If this relation is arranged for λ 1 , then the roots can be computed as μ 1 = 3 2 6 2 and μ 2 = 2 6 2 ; that is, b 1 a 1 = 3 2 6 2 and b 2 a 2 = 2 6 2 .
    Particularly for b 1 = 2 2 6 , b 2 = 2 , a 1 = 2 6 2 , a 2 = 2 + 6 2 , we have the corresponding points as
    A 2 6 2 , 2 + 6 2 , 2 π 12 2 12 and B 2 2 6 , 2 , 2 π 12 6 12 .
    Note that similar steps can be followed by considering λ 2 to find different roots and distinct proper points.
  • For t = π 4 , the striction points, the binormal vectors, the asymptotic planes and the q distance are computed as
    γ π 4 = 1 2 , 1 2 , π 4 2 , γ * π 4 = 4 2 + 1 2 , 4 2 + 1 2 , π 4 2 , B π 4 = 1 2 , 1 2 , 1 2 B * π 4 = 1 2 , 1 2 , 1 2 , H 4 2 x 4 2 y 8 z + 2 π = 0 , H * 4 2 x 4 2 y 8 z + 2 π = 0 , q = 0 .
    For any two points from these asymptotic planes
    A a 1 , a 2 , 2 2 a 1 2 2 a 2 + 2 π 8 H and B b 1 , b 2 , 2 2 b 1 2 2 b 2 + 2 π 8 H * ,
    we have d ( A , B ) = q = 0 . Thus,
    b 1 a 1 2 + b 2 a 2 2 + 2 2 b 1 a 1 + 2 2 b 2 a 2 2 = 0 .
    If again λ 1 = b 1 a 1 and λ 2 = b 2 a 2 , then we re-express the last relation as 3 λ 1 2 + 3 λ 2 2 + 2 λ 1 λ 2 = 0 . By rearranging the last relation according to λ 1 , the corresponding roots are found as μ 1 = μ 2 = 0 ; that is, b 1 a 1 = b 2 a 2 = 0 . Note that, in this situation, the asymptotic planes are coincided. See Figure 3.
  • For t = π 3 , the striction points, the binormal vectors, the asymptotic planes and the q distance are computed as
    γ π 3 = 3 2 2 , 1 2 2 , π 3 2 , γ * π 3 = 16 + 3 2 2 , 17 2 2 , π 3 2 , B π 3 = 1 2 2 , 3 2 2 , 1 2 , B * π 3 = 1 2 2 , 3 2 2 , 1 2 , H 3 x 3 3 y 6 z + 2 π = 0 , H * 3 x 3 3 y 6 z + 12 2 3 1 + 2 π = 0 , q = 2 3 2 .
    For such two points on asymptotic planes as A a 1 , a 2 , 1 2 a 1 3 2 a 2 + 2 π 6 H and   B b 1 , b 2 , 1 2 b 1 3 2 b 2 + 2 6 2 2 + 2 π 6 H * , the distance d ( A , B ) = 2 3 2 . Hence,
    b 1 a 1 2 + b 2 a 2 2 + 1 2 b 1 a 1 3 2 b 2 a 2 + 2 6 2 2 2 = 2 3 2 2 .
    Following the same manner as before, if λ 1 = b 1 a 1 and λ 2 = b 2 a 2 , then the above relation takes the form
    5 λ 1 2 + 7 λ 2 2 2 3 λ 1 λ 2 + 8 6 8 2 λ 1 + 8 6 24 2 λ 2 + 64 32 3 = 0 .
    By arranging this for λ 1 , the roots are found as μ 1 = 2 6 2 and μ 2 = 3 2 6 2 ; that is, b 1 a 1 = 2 6 2 and b 2 a 2 = 3 2 6 2 .
    For b 1 = 2 , b 2 = 2 2 6 , a 1 = 2 + 6 2 , a 2 = 2 6 2 , we have the following coordinates for the points A and B as
    A 2 2 + 6 2 , 2 2 6 2 , 2 + 2 π 6 and B 2 , 2 2 6 , 6 + 2 π 6 .
    See Figure 4 If the arrangements are to be done for λ 2 , another different point pairs can be obtained.
  • Lastly, for t = π 2 , the striction points, the binormal vectors, the asymptotic planes and the q distance are computed as
    γ π 2 = 1 2 , 0 , π 2 2 , γ * π 2 = 9 2 , 4 2 , π 2 2 , B π 2 = 0 , 1 2 , 1 2 , B * π 2 = 0 , 1 2 , 1 2 , H 4 y + 4 z 2 π = 0 , H * 4 y + 4 z 16 2 2 π = 0 , q = 4 .
    For two points from the asymptotic planes
    A 0 , a , a + 2 π 4 H and B 0 , b , b + 4 2 + 2 π 4 H * , d ( A , B ) = 4 .
    Therefore, b a 2 + b a 4 2 2 = 16 . If λ = b a , then we have λ 2 + 4 2 λ + 16 = 0 . The root to this relation is λ = 2 2 which corresponds to a b = 2 2 .
    For a = 3 2 and b = 2 , we have A 0 , 3 2 , 3 2 + 2 π 4 and
    B 0 , 2 , 5 2 + 2 π 4 . See Figure 5.
One may question the amount of the examples given; however, the concretion of the conceptualization for the equidistant ruled surface is something that literature is lacking. Therefore, the given examples are worth sharing for various cases to gain insight into main theme.
Now, let us denote the tangent vectors of the striction curves of q-equidistant ruled surfaces by T s and T s * , respectively. Then, the following relations hold:
T s = cos σ T + sin σ B , T s * = cos σ * T * + sin σ * B *
where T s , T = σ and T s * , T * = σ * , respectively.
Theorem 4.
The parameters t of φ B t , v and t * of φ B * t , v have the following relation
d t * d t 2 = cos σ + p z κ 2 + sin σ + z τ + z + κ p τ 2
Proof. 
If the derivative is taken from the relation (8), we have
T s * d t * d t = T s + p z κ T + z τ + z + κ p τ B .
Next, substituting (10) into this completes the proof. □
Corollary 2.
The expression for the vector T s * in terms of Frenet vectors of the base curve r ( t ) is given as follows:
T s * = cos σ + p z κ T + sin σ + z τ + z + κ p τ B cos σ + p z κ 2 + sin σ + z τ + z + κ p τ 2 1 2
Theorem 5.
If σ and σ * are taken to be the strictions of q-equidistant ruled surface, then there exist the following relations:
cos σ * = sec ϕ cos σ + p z κ cos σ + p z κ 2 + sin σ + z τ + z + κ p τ 2 , cos σ * sin ϕ = 0 , sin σ * = sin σ + z τ + z + κ p τ cos σ + p z κ 2 + sin σ + z τ + z + κ p τ 2
Proof. 
Consider the relation (6) to rewrite T s * = cos σ * T * + sin σ * B * as
T s * = cos σ * cos ϕ T cos σ * sin ϕ N + sin σ * B .
Next, by referring to (12) we have the proof. □
Corollary 3.
The tangent vectors of the base curves of q-equidistant ruled surfaces are parallel.
Proof. 
From (13), we recall cos σ * sin ϕ = 0 . If cos σ * = 0 —that is, σ * = π 2 + k π , k N —then T s * , T * = 0 . In this case, the vector has to be on the polar plane. However, this contradicts the relation (10). Thus, sin ϕ = 0 —that is, ϕ = k π —which clearly means that the vectors T and T * are parallel or equivalently cos ϕ = 1 and sin ϕ = 0 . □
Corollary 4.
The relations between the Frenet vectors of the base curve for q-equidistant ruled surfaces are given by the following.
T * = T , N * = N , B * = B .
Corollary 5.
The relations between the natural curvatures of the base curve for q-equidistant ruled surfaces are given by the following.
κ * = κ 1 d t d t * , τ * = τ d t d t *
Corollary 6.
If φ B * t , v is a closed ruled surface, then the pitch, the angle of pitch and the distribution parameter (drall) for each ruled surface drawn by Frenet vectors are given as
λ T * = r * τ * d t * , λ N * = 0 , λ B * = r * κ * d t * , L T * = r * d t * , L N * = L B * = 0 , P T * = 0 , P N * = τ * κ * 2 + τ * 2 , P B * = 1 τ * ,
respectively.
Theorem 6.
For q-equidistant closed ruled surfaces, the following relations hold among the angles of the pitches of the closed ruled surfaces drawn by Frenet vectors of base curve as
λ T * = cos ϕ λ T + p T + z N + q B τ cos ϕ d t , λ N * = λ N = 0 , λ B * = λ B L T + p T + z N + q B κ 1 d t .
Proof. 
If we substitute τ * of (7) into (15), then we have λ T * = r * τ cos ϕ d t . By recalling the relation r * = r + p T + z N + q B to substitute into the last equation, we have
λ T * = r τ cos ϕ d t + p T + z N + q B τ cos ϕ d t = cos ϕ λ T + p T + z N + q B τ cos ϕ d t .
When a similar procedure is followed in λ B * = r * κ * d t * we have the expression
λ B * = λ B L T + p T + z N + q B κ 1 d t ,
which completes the proof. □
Corollary 7.
Other useful relations among the angles of pitch can be drawn as
λ T * = λ T p T + z N + q B τ d t , λ N * = λ N = 0 , λ B * = λ B L T + p T + z N + q B κ 1 d t .
Theorem 7.
If the base curves of closed q-equidistant ruled surfaces are considered to be as curvature lines, then the relations between the angles of pitch are given as
L T * τ * = cos ϕ τ L T + p T + z N + q B τ cos ϕ d t , L N * = L B * = L N = L B = 0
Proof. 
Since d t * = τ τ * cos ϕ d t , L T * = r * d t * and the base curves are assigned to be curvature line, we write L T * = τ τ * cos ϕ r * d t . By recalling r * = r + p T + z N + q B , we complete the proof. □
Corollary 8.
If the base curves are curvature lines for the q-equidistant closed ruled surfaces, then the following relations hold among the pitches of ruled surfaces drawn by Frenet vectors.
L T * τ * = τ L T p T + z N + q B τ d t , L N * = L B * = L N = L B = 0 .
Theorem 8.
The relations between the distribution parameters of q-equidistant ruled surfaces are
P T * = P T = 0 , P N * = P B cos ϕ κ 1 2 P B 2 + cos 2 ϕ d t * d t , P B * = P B sec ϕ d t * d t .
Proof. 
It is clear that P T * = P T = 0 . From (15), we write the reciprocal of P N * as 1 P N * = κ * 2 + τ * 2 τ * . By doing some arrangements and using (7) we have
P N * = P B cos ϕ κ 1 2 P B 2 + cos 2 ϕ d t * d t . By following similar steps, we find P B * = P B sec ϕ d t * d t , and this completes the proof. □
Corollary 9.
For q-equidistant ruled surfaces, the following relations exist among the dralls of ruled surface drawn by Frenet vectors:
P T * = P T = 0 , P N * = P B κ 1 2 P B 2 + 1 d t * d t , P B * = P B d t * d t
Corollary 10.
If q-equidistant ruled surfaces have the same distribution parameter, then the angle between the tangents is ϕ = arccos d t * d t . If both the ruled surfaces φ C t , v and φ C * t , v whose generator lines are Darboux vectors are closed, then the pitch, the angle of pitch and the distribution parameter (drall) are given as the following:
λ C = λ T sin θ + λ B cos θ , λ C * = λ T * sin θ * + λ B * cos θ * L C = L T sin θ , L C * = L T * sin θ * P C = P C * = 0 .
Theorem 9.
For q-equidistant ruled surfaces, if θ * is the angle between the unit Darboux vector C * and the binormal vector B * , then the following relations exist:
cos θ * = κ 1 τ 2 cos 2 ϕ + κ 1 2 , sin θ * = τ cos ϕ τ 2 cos 2 ϕ + κ 1 2
Proof. 
If κ * and τ * from relation (7) are substituted into the relation (2), and by applying some arrangements, the proof is clear. □
Theorem 10.
For q-equidistant ruled surfaces, the following relation exists for the unit Darboux vector of r * = r * ( t ) .
C * = τ cos 2 ϕ τ 2 cos 2 ϕ + κ 1 2 T τ cos ϕ sin ϕ τ 2 cos 2 ϕ + κ 1 2 N + κ 1 τ 2 cos 2 ϕ + κ 1 2 B
Proof. 
By considering the relations (2), (6) and (9), the proof is straightforward. □
Theorem 11.
For q-equidistant ruled surfaces the pitch, the angle of pitch and the distribution parameter of the closed ruled surface whose generator is unit Darboux vector are as follows:
λ C * = τ cos ϕ τ 2 cos 2 ϕ + κ 1 2 cos ϕ λ T + a 1 + κ 1 τ 2 cos 2 ϕ + κ 1 2 λ B L T + a 3 , L C * τ * = τ 2 cos 2 ϕ L T + a 1 τ cos ϕ τ 2 cos 2 ϕ + κ 1 2 , P C * = P C = 0
where a 1 = p T + z N + q B τ cos ϕ d t , a 3 = p T + z N + q B κ 1 d t .
Proof. 
Using the relations (9) and (16) together with (22) completes the proof. □
Theorem 12.
For the two vectors defined by the Frenet vectors’ motion, which are as X = x 1 T + x 2 N + x 3 B and X = x 1 * T * + x 2 * N * + x 3 * B * , there exists the following relation.
X * = x 1 p cos ϕ x 2 z sin ϕ T * + x 1 p sin ϕ + x 2 z cos ϕ N * + x 3 q B *
Proof. 
We can express the vector X * as
X * = X γ γ * = x 1 T + x 2 N + x 3 B p T z N q B = x 1 p T + x 2 z N + x 3 q B
Next, applying (6) to the above completes the proof. □
Theorem 13.
The pitch, the angle of pitch and the distribution parameter of the closed ruled surface whose generator is the vector X are
λ X = x 1 λ T + x 3 λ B , L X = x 1 L T , P X = τ x 2 2 + x 3 2 x 1 x 3 κ κ 2 x 1 2 + x 2 2 + τ 2 x 2 2 + x 3 2 2 x 1 x 3 κ τ
Proof. 
We first find λ X and L X by using both the relations, (4) and (5). Next the derivative of the vector X and its corresponding norm are calculated as X = x 2 κ T + x 1 κ x 3 τ N + x 2 τ B , and X 2 = κ 2 x 2 2 + x 1 2 + τ 2 x 2 2 + x 3 2 2 x 1 x 3 κ τ . Upon substitution of these into the P X of (4), we complete the proof. □
Theorem 14.
The angle of the pitch of the closed ruled surface whose generator vector is X * is as follows:
λ X * = λ T cos 2 ϕ x 1 p sin ϕ cos ϕ x 2 z + λ B L T x 3 q + a 1 cos ϕ x 1 p sin ϕ x 2 z + a 3 x 3 q ,
where a 1 = p T + z N + q B τ cos ϕ d t , a 3 = p T + z N + q B κ 1 d t .
Proof. 
By the definition of the angle of pitch, we have
λ X * = D * , X * , = λ T * cos ϕ x 1 p sin ϕ x 2 z + λ B * x 3 q = cos ϕ λ T + a 1 cos ϕ x 1 p sin ϕ x 2 z + λ B L T + a 3 x 3 q , = cos ϕ λ T + a 1 cos ϕ x 1 p cos ϕ λ T + a 1 sin ϕ x 2 z + λ B L T + a 3 x 3 q , = λ T cos 2 ϕ x 1 p sin ϕ cos ϕ x 2 z + λ B L T x 3 q + a 1 cos ϕ x 1 p sin ϕ x 2 z + a 3 x 3 q ,
which completes the proof. □
Theorem 15.
The angle of the pitch of the closed ruled surface whose generator vector is X * is given by
L X * τ * = L T τ cos 2 ϕ x 1 p cos ϕ sin ϕ x 2 z + a 1 cos ϕ x 1 p sin ϕ x 2 z
where a 1 = p T + z N + q B τ cos ϕ d t .
Proof. 
If we substitute (3) and (26) into (4), then L X * = L T * cos ϕ x 1 p sin ϕ x 2 z . Next, by considering this time (18), we simply complete the proof. □
Theorem 16.
The distribution parameter of the closed ruled surface whose generator vector X * is
P X * = x 1 p sin ϕ + x 2 z cos ϕ C q x 3 q B q A q 2 + B q 2 + C q 2
where
A q = sin ϕ z x 1 + p κ 1 x 1 p d t d t * + cos ϕ p x 2 + z κ 1 x 2 z d t d t * , B q = sin ϕ p x 2 + z κ 1 x 2 z d t d t * + cos ϕ z + x 1 p + κ 1 x 1 p d t d t * cos ϕ τ x 3 q d t d t * , C q = sin ϕ cos ϕ τ x 1 p d t d t * + cos 2 ϕ τ x 2 z d t d t * q .
Proof. 
By differentiating the relation (26), we first have
X * = z x 1 + p κ * x 1 + κ * p sin ϕ + z p x 2 κ * κ * x 2 + κ * z cos ϕ T * + z p x 2 κ * x 2 + κ * z sin ϕ + κ * x 1 z + x 1 p κ * p τ * x 3 + τ * q cos ϕ N * + τ * x 1 τ * p sin ϕ + τ * x 2 τ * z cos ϕ q B * .
If κ * and τ * of (7) are applied to the above, we then obtain
X * = sin ϕ z x 1 + p κ 1 x 1 p d t d t * + cos ϕ p x 2 + z κ 1 x 2 z d t d t * T * + sin ϕ p x 2 + z κ 1 x 2 z d t d t * + cos ϕ z + x 1 p + κ 1 x 1 p d t d t * cos ϕ τ x 3 q d t d t * N * + sin ϕ cos ϕ τ x 1 p d t d t * + cos 2 ϕ τ x 2 z d t d t * q B *
By using (4), the drall P X * can be easily computed to complete the proof. □
Proposition 1.
When the vector X lies on osculating plane, the pitch, the angle of pitch and the distribution parameter of the two closed ruled surfaces whose generators are the vectors X and X * are given as the following
X = x 1 T + x 2 N , λ X = x 1 λ T , L X = x 1 L T , P X = τ x 2 2 κ 2 x 1 2 + x 2 2 + τ 2 x 2 2 , X * = x 1 p cos ϕ x 2 z sin ϕ T * + x 1 p sin ϕ + x 2 z cos ϕ N * q B * , λ X * = λ T x 1 p cos 2 ϕ x 2 z sin ϕ cos ϕ λ B q + L T q + a 1 x 1 p cos ϕ a 1 x 2 z sin ϕ a 3 q , L X * τ * = L T τ x 1 p cos 2 ϕ x 2 z cos ϕ sin ϕ + a 1 x 1 p cos ϕ a 1 x 2 z sin ϕ , P X * = C q sin ϕ x 1 p + cos ϕ x 2 z + B q q A q 2 + B q 2 + C q 2 .
where a 1 = p T + z N + q B τ cos ϕ d t , a 3 = p T + z N + q B κ 1 d t .
Proof. 
Since X is on the osculating plane, from (26)–(30), we complete the proof. □
Proposition 2.
When the vector X lies on the normal plane, the pitch, the angle of pitch and the distribution parameter of the two closed ruled surfaces, whose generators are the vectors X and X * , are given as the following:
X = x 2 N + x 3 B , λ X = x 3 λ B , L X = 0 , P X = τ x 2 2 + x 3 2 κ 2 x 2 2 + τ 2 x 2 2 + x 3 2 , X * = p cos ϕ sin ϕ x 2 z T * + p sin ϕ + cos ϕ x 2 z N * + x 3 q B * , λ X * = λ T p cos 2 ϕ sin ϕ cos ϕ x 2 z + λ B x 3 q L T x 3 q + a 1 p cos ϕ sin ϕ x 2 z + a 3 x 3 q , L X * τ * = L T τ p cos 2 ϕ cos ϕ sin ϕ x 2 z + a 1 p cos ϕ sin ϕ x 2 z ,
P X * = C q p sin ϕ + cos ϕ x 2 z B q x 3 q A q 2 + B q 2 + C q 2
where a 1 = p T + z N + q B τ cos ϕ d t , a 3 = p T + z N + q B κ 1 d t ,
A q = sin ϕ z + p + p κ 1 d t d t * + cos ϕ p x 2 + z κ 1 x 2 z d t d t * , B q = sin ϕ p x 2 + z κ 1 x 2 z d t d t * + cos ϕ z + x 1 p + p κ 1 d t d t * cos ϕ τ x 3 q d t d t * , C q = p τ sin ϕ cos ϕ d t d t * + cos 2 ϕ τ x 2 z d t d t * q .
Proof. 
Similarly, since X is on the normal plane, we complete the proof by referring to the relations (26)–(30). □
Proposition 3.
While the vector X is on the rectifying plane, the pitch, the angle of pitch and the distribution parameter of the two closed ruled surfaces whose generators are the vectors X and X * are given as the following.
X = x 1 T + x 3 B , λ X = x 1 λ T + x 3 λ B , L X = x 1 L T , P X = τ x 3 2 x 1 x 3 κ κ x 1 τ x 3 2 , X * = cos ϕ x 1 p + z sin ϕ T * + sin ϕ x 1 p z cos ϕ N * + x 3 q B * , λ X * = λ T cos 2 ϕ x 1 p + z sin ϕ cos ϕ + λ B x 3 q L T x 3 q + a 1 cos ϕ x 1 p + z sin ϕ + a 3 x 3 q , L X * τ * = L T τ cos 2 ϕ x 1 p + z cos ϕ sin ϕ + a 1 cos ϕ x 1 p + z sin ϕ , P X * = C q sin ϕ x 1 p z cos ϕ B q x 3 q A q 2 + B q 2 + C q 2
where a 1 = p T + z N + q B τ cos ϕ d t , a 3 = p T + z N + q B κ 1 d t ,
A q = sin ϕ z x 1 + p κ 1 x 1 p d t d t * + cos ϕ p + z 1 + κ 1 d t d t * , B q = sin ϕ p + z 1 + κ 1 d t d t * + cos ϕ z + x 1 p + κ 1 x 1 p d t d t * cos ϕ τ x 3 q d t d t * , C q = sin ϕ cos ϕ τ x 1 p d t d t * z τ cos 2 ϕ d t d t * q .
Proof. 
Similarly again, since X is on the rectifying plane, by using (26)–(30), we complete the proof. □

3. Conclusions and Discussion

Overall, in this study, parallel q-equidistant ruled surfaces were introduced such that the binormal vectors are parallel along the striction curves of their corresponding binormal ruled surfaces and the distance between the asymptotic planes is constant at proper points. The geometric properties of these ruled surfaces were examined, and some useful relations were given to be used for future research. In our next work, we are going to proceed to study geometric properties and symmetric properties of these ruled surfaces combined with the techniques and results in [19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52] to find more new results.

Author Contributions

Conceptualization, Y.L. and S.Ş.; methodology, S.Ş. and A.Ö.; software, D.C.; validation, Y.L., S.Ş. and D.C.; writing—original draft preparation, Y.L., S.Ş. and D.C.; writing—review and editing, Y.L. and D.C.; visualization, D.C.; supervision, Y.L. and S.Ş.; project administration, S.Ş. and A.Ö.; funding acquisition, Y.L. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the National Natural Science Foundation of China (grant number 12101168), the Zhejiang Provincial Natural Science Foundation of China (grant number LQ22A010014) and the Scientific Research Projects Coordination Unit of Ordu University (project number: B-1828).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Acknowledgments

We gratefully acknowledge the constructive comments from the editor and the anonymous referees.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Gray, A.; Abbena, E.; Salamon, S. Modern Differential Geometry of Curves and Surfaces with Mathematica; Chapman and Hall/CRC: Boca Raton, FL, USA, 2017. [Google Scholar]
  2. do Carmo, M.P. Differential Geometry of Curves and Surfaces; Dover Publications: Mineola, NY, USA, 2016. [Google Scholar]
  3. Edge, W.L. The Theory of Ruled Surfaces; Cambridge University Press: Cambridge, UK, 2011. [Google Scholar]
  4. Flöry, S.; Pottmann, H. Ruled Surfaces for Rationalization and Design in Architecture. Available online: http://papers.cumincad.org/cgi-bin/works/paper/acadia10_103 (accessed on 28 July 2022).
  5. Farin, G. Curves and Surfaces for Computer-Aided Geometric Design: A Practical Guide; Elsevier: Amsterdam, The Netherlands, 2014. [Google Scholar]
  6. Hunt, K.H. Kinematic Geometry of Mechanisms; Oxford Press: Oxford, UK, 1978. [Google Scholar]
  7. Valenontis, I. Parallel P-Äquidistante Regelflachen. Manuscripta Math. 1986, 54, 391–404. [Google Scholar] [CrossRef]
  8. Masal, M.; Kuruoğlu, N. Some Characteristic Properties of the Parallel P-Equidistant Ruled Surfaces in the Euclidean Space. Pure Appl. Math. Sci. India 1999, L1, 35–42. [Google Scholar]
  9. Masal, M.; Kuruoğlu, N. Some Characteristic Properties of the Shape Operators of Parallel p-Equidistant Ruled Surfaces. Bull. Pure Appl. Sci. 2000, 19E, 361–364. [Google Scholar]
  10. Masal, M.; Kuruoğlu, N. Some characteristic properties of the Spherical Indicatrix Leading Curves of Parallel p-Equidistant Ruled Surfaces. Bull. Pure Appl. Sci. 2000, 19E, 405–410. [Google Scholar]
  11. Masal, M.; Kuruoğlu, N. Generalized parallel pi-equidistant ruled surfaces. Acta Comment. Univ. Tartu. Math. 2013, 171, 3–18. [Google Scholar]
  12. Şenyurt, S. Integral Invariants of Parallel P-Equidistant Ruled Surfaces Which are Generated by Instantaneous Pfaff Vector. Ordu Univ. J. Sci. Tecnol. 2012, 2, 13–22. [Google Scholar]
  13. Azak, A.Z.; Tosun, M.; Masal, M. Null parallel p-equidistant b scrolls. Bol. Soc. Parana. 2014, 32, 23–34. [Google Scholar]
  14. Kuruoğlu, N.; Masal, M. Timelike parallel pi-equidistant ruled surfaces by a time-like base curve in the Minkowski 3-space R31. Acta Comment. Univ. Tartu. Math. 2007, 11, 1–13. [Google Scholar]
  15. Kuruoğlu, N.; Masal, M. Timelike parallel equidistant ruled surfaces by a time-like base curve in the Minkowski 3-space R31. Acta Comment. Univ. Tartu. Math. 2009, 13, 3–9. [Google Scholar]
  16. Sarıaydın, M.T.; Korpınar, V.; Asil, V. On Parallel p-equidistant Ruled Surfaces by Using Modified Orthogonal Frame with Curvature in E3. Bol. Soc. Paran. Mat. 2022, 2022, 1–7. [Google Scholar]
  17. Cevahir, C. On Equidistant Parallel Ruled Surfaces Produced by Darboux Vectors in High Dimensional Spaces. Ph.D. Thesis, Institute of Sciences, Ordu University, Ordu, Turkey, 2021. [Google Scholar]
  18. Gür Mazlum, S.; Şenyurt, S.; Grilli, L. The Dual Expression of Parallel Equidistant Ruled Surfaces in Euclidean 3-Space. Symmetry 2022, 14, 1062. [Google Scholar] [CrossRef]
  19. As, E.; Şenyurt, S. Some Characteristic Properties of Parallel z-Equidistant Ruled Surfaces. Math. Probl. Eng. 2013, 2013, 587289. [Google Scholar] [CrossRef]
  20. Fenchel, W. On the Differential Geometry of Closed Space Curves. Bull. Am. Math. Soc. 1951, 57, 44–54. [Google Scholar] [CrossRef]
  21. Yang, Z.C.; Li, Y.; Erdoǧdub, M.; Zhu, Y.S. Evolving evolutoids and pedaloids from viewpoints of envelope and singularity theory in Minkowski plane. J. Geom. Phys. 2022, 104513, 1–23. [Google Scholar] [CrossRef]
  22. Li, Y.; Ganguly, D.; Dey, S.; Bhattacharyya, A. Conformal η-Ricci solitons within the framework of indefinite Kenmotsu manifolds. AIMS Math. 2022, 7, 5408–5430. [Google Scholar] [CrossRef]
  23. Li, Y.; Abolarinwa, A.; Azami, S.; Ali, A. Yamabe constant evolution and monotonicity along the conformal Ricci flow. AIMS Math. 2022, 7, 12077–12090. [Google Scholar] [CrossRef]
  24. Li, Y.; Khatri, M.; Singh, J.P.; Chaubey, S.K. Improved Chen’s Inequalities for Submanifolds of Generalized Sasakian-Space-Forms. Axioms 2022, 11, 324. [Google Scholar] [CrossRef]
  25. Li, Y.; Uçum, A.; İlarslan, K.; Camcı, Ç. A New Class of Bertrand Curves in Euclidean 4-Space. Symmetry 2022, 14, 1191. [Google Scholar] [CrossRef]
  26. Li, Y.; Mofarreh, F.; Agrawal, R.P.; Ali, A. Reilly-type inequality for the ϕ-Laplace operator on semislant submanifolds of Sasakian space forms. J. Inequal. Appl. 2022, 1, 1–17. [Google Scholar]
  27. Li, Y.; Mofarreh, F.; Dey, S.; Roy, S.; Ali, A. General Relativistic Space-Time with η1-Einstein Metrics. Mathematics 2022, 10, 2530. [Google Scholar] [CrossRef]
  28. Li, Y.; Dey, S.; Pahan, S.; Ali, A. Geometry of conformal η-Ricci solitons and conformal η-Ricci almost solitons on Paracontact geometry. Open Math. 2022, 20, 574–589. [Google Scholar] [CrossRef]
  29. Li, Y.; Alkhaldi, A.H.; Ali, A.; Laurian-Ioan, P. On the Topology of Warped Product Pointwise Semi-Slant Submanifolds with Positive Curvature. Mathematics 2021, 9, 3156. [Google Scholar] [CrossRef]
  30. Li, Y.; Haseeb, A.; Ali, M. LP-Kenmotsu manifolds admitting η-Ricci solitons and spacetime. J. Math. 2022, 2022, 6605127. [Google Scholar]
  31. Todorčević, V. Harmonic Quasiconformal Mappings and Hyperbolic Type Metrics; Springer: Berlin/Heidelberg, Germany, 2019. [Google Scholar]
  32. Todorčević, V. Subharmonic behavior and quasiconformal mappings. Anal. Math. Phys. 2019, 9, 1211–1225. [Google Scholar] [CrossRef]
  33. Kojić, V.; Pavlović, M. Subharmonicity of |f|p for quasiregular harmonic functions, with applications. J. Math. Anal. Appl. 2008, 342, 742–746. [Google Scholar] [CrossRef]
  34. Kojić, V. Quasi-nearly subharmonic functions and conformal mappings. Filomat 2007, 21, 243–249. [Google Scholar] [CrossRef]
  35. Manojlović, V.; Vuorinen, M. On quasiconformal maps with identity boundary values. Trans. Am. Math. Soc. 2011, 363, 2367–2479. [Google Scholar] [CrossRef]
  36. Manojlović, V. On bilipschicity of quasiconformal harmonic mappings. Novi Sad J. Math. 2015, 45, 105–109. [Google Scholar] [CrossRef]
  37. Manojlović, V. Bilipschitz mappings between sectors in planes and quasi-conformality. Funct. Anal. Approx. Comput. 2009, 1, 1–6. [Google Scholar]
  38. Manojlović, V. Bi-Lipschicity of quasiconformal harmonic mappings in the plane. Filomat 2009, 23, 85–89. [Google Scholar] [CrossRef]
  39. Manojlović, V. On conformally invariant extremal problems. Appl. Anal. Discret. Math. 2009, 3, 97–119. [Google Scholar] [CrossRef]
  40. Antić, M.; Moruz, M.; Van, J. H-Umbilical Lagrangian Submanifolds of the Nearly Kähler S3×S3. Mathematics 2020, 8, 1427. [Google Scholar] [CrossRef]
  41. Antić, M.; Djordje, K. Non-Existence of Real Hypersurfaces with Parallel Structure Jacobi Operator in S6(1). Mathematics 2022, 10, 2271. [Google Scholar] [CrossRef]
  42. Antić, M. Characterization of Warped Product Lagrangian Submanifolds in Cn. Results Math. 2022, 77, 1–15. [Google Scholar] [CrossRef]
  43. Antić, M.; Vrancken, L. Conformally flat, minimal, Lagrangian submanifolds in complex space forms. Sci. China Math. 2022, 65, 1641–1660. [Google Scholar] [CrossRef]
  44. Antić, M.; Hu, Z.; Moruz, M.; Vrancken, L. Surfaces of the nearly Kähler S3×S3 preserved by the almost product structure. Math. Nachr. 2021, 294, 2286–2301. [Google Scholar] [CrossRef]
  45. Antić, M. A class of four-dimensional CR submanifolds in six dimensional nearly Kähler manifolds. Math. Slovaca 2018, 68, 1129–1140. [Google Scholar] [CrossRef]
  46. Antić, M. A class of four dimensional CR submanifolds of the sphere S6(1). J. Geom. Phys. 2016, 110, 78–89. [Google Scholar] [CrossRef]
  47. Ali, A.T. Non-lightlike constant angle ruled surfaces in Minkowski 3-space. J. Geom. Phys. 2020, 157, 103833. [Google Scholar] [CrossRef]
  48. Ali, A.T. A constant angle ruled surfaces. Int. J. Geom. 2018, 7, 69–80. [Google Scholar]
  49. Ali, A.T. Non-lightlike ruled surfaces with constant curvatures in Minkowski 3-space. Int. J. Geom. Methods Mod. Phys. 2018, 15, 1850068. [Google Scholar] [CrossRef]
  50. Ali, A.T.; Hamdoon, F.M. Surfaces foliated by ellipses with constant Gaussian curvature in Euclidean 3-space. Korean J. Math. 2017, 25, 537–554. [Google Scholar]
  51. Ali, A.T.; Abdel Aziz, H.S.; Sorour, A.H. On some geometric properties of quadric surfaces in Euclidean space. Honam Math. J. 2016, 38, 593–611. [Google Scholar] [CrossRef]
  52. Ali, A.T.; Abdel Aziz, H.S.; Sorour, A.H. On curvatures and points of the translation surfaces in Euclidean 3-space. J. Egyptian Math. Soc. 2015, 23, 167–172. [Google Scholar] [CrossRef] [Green Version]
Figure 1. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = 0 .
Figure 1. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = 0 .
Symmetry 14 01879 g001
Figure 2. The q-equidistant ruled surfaces and the corresponding asymptotic planes for t = π 6 .
Figure 2. The q-equidistant ruled surfaces and the corresponding asymptotic planes for t = π 6 .
Symmetry 14 01879 g002
Figure 3. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = π 4 .
Figure 3. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = π 4 .
Symmetry 14 01879 g003
Figure 4. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = π 3 .
Figure 4. The q - equidistant ruled surfaces and the corresponding asymptotic planes for t = π 3 .
Symmetry 14 01879 g004
Figure 5. The q-equidistant ruled surfaces and the corresponding asymptotic planes for t = π 2 .
Figure 5. The q-equidistant ruled surfaces and the corresponding asymptotic planes for t = π 2 .
Symmetry 14 01879 g005
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Li, Y.; Şenyurt, S.; Özduran, A.; Canlı, D. The Characterizations of Parallel q-Equidistant Ruled Surfaces. Symmetry 2022, 14, 1879. https://doi.org/10.3390/sym14091879

AMA Style

Li Y, Şenyurt S, Özduran A, Canlı D. The Characterizations of Parallel q-Equidistant Ruled Surfaces. Symmetry. 2022; 14(9):1879. https://doi.org/10.3390/sym14091879

Chicago/Turabian Style

Li, Yanlin, Süleyman Şenyurt, Ahmet Özduran, and Davut Canlı. 2022. "The Characterizations of Parallel q-Equidistant Ruled Surfaces" Symmetry 14, no. 9: 1879. https://doi.org/10.3390/sym14091879

APA Style

Li, Y., Şenyurt, S., Özduran, A., & Canlı, D. (2022). The Characterizations of Parallel q-Equidistant Ruled Surfaces. Symmetry, 14(9), 1879. https://doi.org/10.3390/sym14091879

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop