Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions
by
, , , , and
Omid Mortezai
1, 
Haniyeh Rahimi
2,*,
Maryam Tofangchiha
3,*,
Sina Radfar
4,
Mehdi Ranjbaran
5,
Francesco Pagnoni
6,
Rodolfo Reda
6
and
Luca Testarelli
6
1
Department of Orthodontics, School of Dentistry, Qazvin University of Medical Sciences, Qazvin 34199-15315, Iran
2
Department of Orthodontics, Dental Caries Prevention Research Center, Qazvin University of Medical Sciences, Qazvin 34199-15315, Iran
3
Department of Oral and Maxillofacial Radiology, Dental Caries Prevention Research Center, Qazvin University of Medical Sciences, Qazvin 34199-15315, Iran
4
Department of Endodontics, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz 51666-53431, Iran
5
Metabolic Diseases Research Center, Research Institute for Prevention of Non-Communicable Diseases, Qazvin University of Medical Sciences, Qazvin 34199-15315, Iran
6
Department of Oral and Maxillo-Facial Science, Sapienza University of Rome, Via Caserta 06, 00161 Rome, Italy
*
Authors to whom correspondence should be addressed.
Diagnostics 2023, 13(19), 3088; https://doi.org/10.3390/diagnostics13193088
Submission received: 22 August 2023
/
Revised: 23 September 2023
/
Accepted: 27 September 2023
/
Published: 29 September 2023
(This article belongs to the Section Pathology and Molecular Diagnostics)
Abstract
:This study aimed to assess the relationship of the morphology and size of the sella turcica (ST) with dental anomalies and skeletal malocclusions. This cross-sectional study was conducted on records of fixed orthodontic patients treated between 2013 and 2022. Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. Preoperative panoramic radiographs and lateral cephalograms, intraoral photographs, and primary dental casts of patients were used to detect dental anomalies. Gender, sagittal and vertical skeletal patterns, dental anomalies, and dimensions (length, depth, and diameter), and morphology of the ST were all recorded according to the lateral cephalograms of patients. Data were analyzed using independent t-test, one-way and two-way ANOVA, Chi-square test, and log rank test (alpha = 0.05). The depth and diameter of the ST had no significant correlation with gender (p > 0.05); however, the length of the ST was significantly longer in males than females (p < 0.05). The morphology of the ST had a significant correlation with gender (p < 0.05). The ST morphology had a significant correlation with the anteroposterior skeletal pattern, microdontia, and tooth impaction as well (p < 0.05). The present results revealed a significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction.
1. Introduction
Malocclusion is a multifactorial developmental disorder, which is influenced by genetics as well as environmental and ethnic factors [1]. Any discrepancy between the skeletal position of the maxilla and mandible can lead to anteroposterior or vertical malocclusion [2]. Early detection of skeletal malocclusion is imperative for easier and more conservative treatment [3]. Many parameters have been suggested for the prediction of the growth pattern and development of malocclusion, such as the craniofacial angle, frontal sinus, and antegonial notch [4,5,6].
The sella turcica (ST) is a saddle-shaped bony structure that is anatomically located over the intracranial surface of the body of the sphenoid bone. It has two anterior clinoid processes, tuberculum sellae, hypophyseal fossa coated with diaphragm sellae, and two posterior processes. The pituitary gland disorders can change the ST morphology [7]. The ST morphology does not change significantly after 12 years of age. At 5 years of age, the anterior wall of the ST is stabilized [8]. Anomalies of the anterior wall of the ST are correlated with frontonasal anomalies, while anomalies of the posterior border may be correlated with cerebral anomalies [7].
Facial structures follow the developmental pattern of the ST [9]. Development of the midface including the ST and the teeth may change via impairment of the signaling pathways following mutations in the homeobox genes [10]. Also, endocrine disorders may affect tooth development due to functional disorders and alterations in hormonal levels.
Finding a correlation between the ST dimensions and morphology with skeletal malocclusions may help in their early detection and initiation of preventive interventions as well as decrease the future need for more complex procedures [11].
Prediction of the facial growth pattern and direction prior to the growth spurt period and puberty can be valuable [4]. Considering the cephalocaudal growth gradient, the ST dimensions may serve as a major diagnostic factor for Class II and Class III malocclusions and primary treatment planning. Since maturation of the ST occurs earlier than maturation of the mandible, the ST dimensions may help in the detection of micrognathia and macrognathia [12,13,14].
The structure of the ST can be precisely evaluated on lateral cephalograms. The ST is routinely traced in cephalometric tracing. The sella or S point at the center of the ST is a highly important reference point in cephalometric analysis [13] and evaluation of the skull morphology and intermaxillary relationship [15]. The ST can also be used for the evaluation of growth and developmental changes in orthodontic treatment.
The correlation of ST morphology and dimensions with anteroposterior [11,16,17] and vertical [18] skeletal malocclusion has been previously investigated. Also, some studies assessed the correlation of the presence of ST bridge with dental anomalies [14,19,20]. However, no comprehensive study has assessed the correlation of different types of ST morphology and dimensions with dental anomalies and skeletal malocclusions [21,22]. Thus, this study aimed to assess the relationship of the morphology and size of the ST with dental anomalies and skeletal malocclusions.
2. Materials and Methods
This study was conducted using records of eligible fixed orthodontic patients treated between 2013 and 2022, which were retrieved from the archives of the Orthodontics Department of School of Dentistry, Qazvin University of Medical Sciences. The study protocol was approved by the ethics committee of the university (IR.QUMS.REC.1401.092).
2.1. Sample Size
The sample size was calculated to be 450 for the assessment of the correlation of ST dimensions and morphology with dental anomalies according to a previous study [18], considering the general prevalence of dental anomalies to be 25% [23] and assuming alpha = 0.05 (Z = 1.96) and an accuracy of 4%. The required sample size for the assessment of the correlation of ST length and depth with the type of malocclusion was calculated to be 321 according to a previous study [24], using G*Power version 3.1.9.2 software and one-way ANOVA analysis, assuming alpha = 0.05 (Z = 1.96), a study power of 0.90, and an effect size of 0.20. To increase the power of the study, 550 records were included.
2.2. Eligibility Criteria
The inclusion criteria were being aged between 13 and 40 years [8], no history of previous orthodontic or orthopedic treatment, no history of trauma to the skull or face, no craniofacial disorders, and the absence of neurological disorders, systemic diseases, or malignancies requiring radiotherapy of the skull or face.
The exclusion criteria were lateral cephalograms with no diagnostic value, poor visualization of the ST, incorrect head position, and incomplete patient records.
2.3. Data Collection
After obtaining written informed consent from the patients, the dental records of 550 orthodontic patients were evaluated. Preoperative lateral cephalograms of patients were extracted from their records. All radiographs were taken with a Rayscan alpha scanner (Ray Co., Ltd., Hwaseong-si, Republic of Korea) with the exposure settings of 80 kVp, 11 mA, and 11 s time. All cephalograms were taken with the patients’ heads in natural head positions [25], with relaxed lips, and teeth in occlusion. The magnification of the device was 2.2 mm, which was taken into account in the measurements. All radiographs were digitized with a DF-Angell 880 X-ray film scanner, with 1 EF magnification and 875 dpi resolution, and were saved in TIF, which is a lossless save file format. The digital file of the radiographs was then transferred to the Scanora version 2.6.2.1 software, which supports cephalometric analyses. The related anatomical landmarks and ST morphology were evaluated and marked by an orthodontist and an oral radiologist with 95% inter-observer agreement. In case of a disagreement regarding an anatomical landmark location, another experienced oral radiologist was consulted to make a decision. Next, a trained post-graduate student of orthodontics measured the ST dimensions.
2.4. Assessment of ST Morphology
2.5. Assessment of ST Dimensions
The distance between the tuberculum sellae and dorsum sellae was recorded as the ST length. The largest anteroposterior distance of ST between the tuberculum sellae tip and the posterior wall was recorded as the ST diameter, and the depth at the deepest point of the ST floor was measured as the ST depth (Figure 2) [27,28].
2.6. Assessment of Anteroposterior and Vertical Skeletal Patterns
Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. The anteroposterior skeletal pattern was determined according to the ANB angle. The ANB angle was drawn by identifying point A (anterior limit of the apical base of the maxilla), N (nasion), and B (anterior limit of the apical base of the mandible). The ANB values between 0 and 4 degrees indicated skeletal Class I, values > 4 degrees indicated skeletal Class II, and values < 9 indicated skeletal Class III [29].
To determine the vertical facial pattern, the patients were categorized into three groups by measuring the SN-MP angle. Those with SN-MP angle (formed between Me-Go and N-S) < 27 degrees were assigned to the short face, those with SN-MP angle between 27 and 37 degrees were assigned to the normal face, and those with SN-MP angle > 37 degrees were assigned to the long face group [30].
2.7. Dental Anomaly
Preoperative panoramic and cephalometric radiographs, intraoral photographs, and preoperative dental casts of patients were used for detection of dental anomalies. Other records such as cone-beam computed tomography scans of patients with palatally-impacted canine teeth were also used, if available.
Gender, anteroposterior and vertical skeletal patterns, dental anomaly, and ST dimensions and morphology were all recorded.
2.8. Statistical Analysis
Data were analyzed using SPSS version 25 (IBM Co., Armonk, NY, USA). The homogeneity of the variances was assessed and confirmed with the Levene’s test, and the normality of data distribution was analyzed and confirmed with a histogram and Q-Q plot. Thus, quantitative variables were compared between the two groups using independent t-test and more than two groups using one-way ANOVA and multiple ANOVA (MANOVA). Qualitative variables were compared between two or more groups with the Chi-square test and the log rank test. Pairwise comparisons were carried out using post hoc tests. The level of statistical significance was set at 0.05.
3. Results
Records of 550 patients including 376 females (68.4%) and 174 males (31.6%) were evaluated. The mean age of patients was 19 years (range 13 to 28 years).
3.1. Vertical Skeletal Pattern
Of all patients, 9.5% (n = 52) were short face, 57.5% (n = 316) were normal, and 33.1% (n = 182) were long face.
3.2. Anteroposterior Skeletal Pattern
Also, 42.2% (n = 232) were Class I, 43.6% (n = 240) were Class II, and 14.2% (n = 78) were Class III.
3.3. ST Dimensions
Table 1 presents the measures of central dispersion for the length, depth, and diameter of the ST.
3.4. ST Morphology
Of all patients, the ST morphology was normal in 48.4% (n = 266), ST bridge in 20.4% (n = 112), oblique anterior wall in 12% (n = 66), irregularity in the dorsum sellae in 8% (n = 44), pyramidal-shaped dorsum sellae in 6.4% (n = 35), and double contour of the floor in 4.9% (n = 27).
3.5. Dental Anomaly
Of all patients, 52.4% (n = 288) did not have any dental anomaly, 14.9% (n = 82) had hypodontia, 14% (n = 77) had impaction, 4.9% (n = 27) had microdontia, 3.8% (n = 21) had hyperdontia, and 3.5% (n = 19) had transposition.
3.6. Correlation of the ST Morphology with Anteroposterior Skeletal Pattern
Table 2 presents the correlation of the ST morphology with the anteroposterior skeletal pattern.
The Chi-square test showed a significant correlation between the ST morphology and anteroposterior skeletal pattern (p = 0.009), such that the normal morphology of ST had a significantly higher frequency in Class I and Class II patients; while, ST bridge, irregularity in the dorsum sellae, and pyramidal-shaped dorsum sellae had a higher frequency in Class III individuals. Double contour of the floor had a higher frequency in Class I cases.
3.7. Correlation of the ST Dimensions with Anteroposterior Skeletal Pattern
Table 3 presents the correlation of the ST dimensions with the anteroposterior skeletal pattern.
Although the mean dimensions of the ST in Class I patients were higher than the corresponding values in Class II and Class III cases, no significant correlation was found between the ST dimensions and anteroposterior skeletal pattern (p > 0.05).
3.8. Correlation of the ST Morphology with Vertical Skeletal Pattern
Table 4 presents the correlation of the ST morphology with the vertical skeletal pattern.
3.9. Correlation of the ST Dimensions with Vertical Skeletal Pattern
Table 5 presents the correlation of the ST dimensions with the vertical skeletal pattern.
3.10. Correlation of the ST Morphology and Dental Anomaly
Table 6 shows the correlation of the ST morphology and dental anomalies.
The Chi-square test showed significant correlations between the ST morphology and absence of dental anomaly, microdontia, and impaction (p < 0.05). However, the ST morphology had no significant correlation with hyperdontia, transposition, hypodontia, and third molar missing (p > 0.05).
3.11. Correlation of the ST Dimensions and Dental Anomalies
As shown in Table 7, the Chi-square test showed no significant correlation between the ST dimensions and dental anomalies.
3.12. Correlation of the ST Morphology and Gender
Table 8 presents the frequency of different ST morphologies based on gender.
The Chi-square test showed a significant correlation between the ST morphology and gender (p = 0.028), such that the prevalence of normal morphology, ST bridge, and double contour of the floor was significantly higher in females, while the prevalence of irregularity in the dorsum sellae and pyramidal-shaped dorsum sellae was higher in males.
3.13. Correlation of the ST Dimensions and Gender
As shown in Table 9, the independent t-test showed no significant correlation between the depth and diameter of the ST with gender (p > 0.05).
However, the ST length had a significant correlation with gender (p < 0.05), such that the mean ST length in males was significantly higher than that in females.
4. Discussion
This study assessed the relationship of the morphology and size of the ST with dental anomalies and skeletal malocclusions. The results showed a significant correlation between the ST morphology and gender, such that the prevalence of normal morphology, ST bridge, and double contour of the floor was higher in females than males, while the prevalence of irregularity in the dorsum sellae and pyramidal-shaped dorsum sellae was higher in males than females. Consistent with the present results, Motwani et al. [24] showed a significant correlation between the ST morphology and gender such that the anterior oblique wall, ST bridge, double contour of the floor, and pyramidal-shaped dorsum sellae were more commonly seen in females than males. Yan et al. [31], Bassey et al. [32], and Shrestha et al. [33] found no significant correlation between the ST morphology and gender, while Sathyanarayana et al. [9] demonstrated that anterior oblique wall, ST bridge, double contour of the floor and pyramidal-shaped dorsum sellae were more common in males than females. Variations in the results can be due to differences in the classification systems used, inclusion criteria, and methods of measurement of the dimensions and assessment of the morphology of ST.
The present results revealed a significant correlation between the ST morphology and anteroposterior skeletal pattern, such that the normal ST morphology was more commonly seen in Class I and Class II patients; however, ST bridge, irregularity in the dorsum sellae, and pyramidal-shaped dorsum sellae were more commonly detected in Class III, and double contour of the floor was more commonly seen in Class I patients. Consistent with the present results, Valizadeh et al. [34] found a significant correlation between the ST morphology and anteroposterior skeletal pattern, such that normal ST morphology was more commonly seen in Class I patients, while ST bridge, irregularity in the dorsum sellae, and pyramidal-shaped dorsum sellae were more common in Class III individuals. Sathyanarayana et al. [9] demonstrated that the ST morphology was normal in the majority (61%) of the cases, and ST bridge was more common in Class III individuals. In contrast to the present results, Al-Mohana et al. [35] found no significant correlation between the ST morphology and anteroposterior skeletal pattern.
Two reasons have been proposed for the higher incidence of ST bridge compared with other abnormal morphologies. The first reason is that the fusion between the clinoid processes may only be a radiographic finding due to superimposition of structures and not an actual bony connection. The second reason is that among different abnormal morphologies of the ST, only the ST bridge can occur during the prenatal period [12]. Also, variations in the results can be due to differences in the ST morphology and skeletal patterns in different races.
The present study found no significant correlation between the ST morphology and vertical skeletal pattern. Consistent with the present results, Afzal and Fida [11] and Ahmad et al. [18] showed no significant correlation between the ST morphology and vertical skeletal pattern. However, Yan et al. [31] and Atilla et al. [36] indicated a significant correlation between the ST morphology and vertical skeletal pattern. Variations in the reported results can be attributed to evaluation of different age groups, statistical populations, races, different methods of assessment of ST morphology, and the classification systems applied.
The current results revealed significant correlations between the ST morphology with microdontia and impaction, such that these dental anomalies were more common in individuals with ST bridge. However, no other significant correlations were found. Consistent with the present results, Jankowski et al. [21], Kaya et al. [37], Karaman et al. [38], and Jankowski et al. [39] demonstrated a significant correlation between dental anomalies and ST bridge. Alam and Alfawzan [40] indicated a higher frequency of ST bridge in patients with cleft. The majority of patients with cleft had severe skeletal Class III malocclusion associated with different dental anomalies such as impacted canine teeth, congenital missing, and presence of supernumeraries. However, Leonardi et al. [41] revealed a significantly higher frequency of ST bridging in patients with dental transposition than the control group. Since the ST mainly forms during the prenatal period (similar to most cranial base structures), different anomalies can affect the ST morphology and dimensions [12].
The present results indicated no significant correlation between the ST depth and diameter with gender; however, the ST length was significantly greater in males than females. In line with the present results, Bassey et al. [32] found a significant correlation between the length and depth of ST with gender and demonstrated that the ST length was greater in males. Motwani et al. [24] found no significant correlation between the ST depth and diameter with gender; however, the ST length was significantly greater in males than females. Sathyanarayana et al. [9] found no significant correlation between the ST depth and diameter with gender, but the ST length was significantly greater in males than females. Also, Yan et al. [31], Shrestha et al. [33], Islam et al. [42], Olubunmi et al. [43], Valizadeh et al. [34], and Nagaraj et al. [44] found no significant correlation between the ST dimensions and gender. Hasan et al. [45] indicated no significant difference between males and females in ST dimensions, except in ST depth. Variations in the reported results in the literature in this respect can be due to using different classification systems, measurement methods, and inclusion criteria.
The present results revealed no significant correlation between the ST dimensions and anteroposterior skeletal pattern. In agreement with the present results, Nadim [46] found no significant correlation between the ST dimensions and anteroposterior skeletal pattern. Also, Valizadeh et al. [34] indicated no significant correlation between the ST dimensions and anteroposterior skeletal pattern. However, Shrestha et al. [33] found a significant correlation between the ST length and diameter with anteroposterior skeletal pattern; nonetheless, the ST depth had no significant correlation with anteroposterior skeletal pattern. Moslemzadeh et al. [47] demonstrated greater ST length in Class III patients, compared with Class I and Class II cases. Sathyanarayana et al. [9] showed a significant correlation between the ST length and diameter with anteroposterior skeletal pattern, such that the ST length and diameter were greater in Class III compared with Class I and II individuals. However, the ST depth had no significant correlation with anteroposterior skeletal pattern. Variations in the results can be due to using different classification systems, radiographic techniques, and radiographic magnifications.
The present findings revealed no significant correlation between the ST dimensions and vertical skeletal pattern. The same result was reported by Taghiloo et al. [48]. Afzal and Fida [11] reported a significant difference in ST length and depth among patients with different vertical skeletal patterns; however, the ST diameter had no significant correlation with the vertical skeletal pattern. Ahmad et al. [18] found no significant correlation between the ST length and depth with vertical skeletal pattern; however, the ST diameter was significantly correlated with the vertical skeletal pattern. Variations in the results can be due to using different classification systems, radiographic techniques, and radiographic magnifications.
In the present study, no significant correlation was found between the ST dimensions and dental anomalies, which is in agreement with the results of Motwani et al. [22], and Kaya et al. [37]. Since a major part of the ST forms during the prenatal period, similar to many other cranial base structures, dental anomalies have no significant effect on its dimensions.
5. Conclusions
Considering the limitations of the present study, the results showed significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction. No significant correlations were found between the ST dimensions and anteroposterior skeletal pattern, ST dimensions, and morphology with vertical skeletal pattern, or ST dimensions and dental anomalies.
Author Contributions
Conceptualization, O.M., H.R. and R.R.; methodology, M.T. and F.P.; software, F.P. and R.R.; validation, O.M., M.T., S.R. and L.T.; formal analysis, M.R. and L.T.; investigation, R.R.; resources, M.T.; data curation, M.R. and F.P.; writing—original draft preparation, O.M., H.R. and M.R.; writing—review and editing, S.R., F.P. and R.R.; visualization, L.T.; supervision, L.T.; project administration, M.T. and L.T. All authors have read and agreed to the published version of the manuscript.
Funding
This study received no external funding.
Institutional Review Board Statement
The study was approved by the ethics committee of Qazvin University of Medical Sciences (IR.QUMS.REC.1401.092).
Informed Consent Statement
Written informed consent was obtained from all patients to use their medical and dental records for research purposes.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author.
Acknowledgments
The authors would like to thank Mojdeh kalantar Motamedi for her assistance in writing this paper.
Conflicts of Interest
The authors declare no conflict of interests.
References
- Alhammadi, M.S.; Halboub, E.; Fayed, M.S.; Labib, A.; El-Saaidi, C. Global distribution of malocclusion traits: A systematic review. Dent. Press J. Orthod. 2018, 23, 40.e1. [Google Scholar] [CrossRef] [PubMed]
- Downs, W.B. Variations in facial relationships: Their significance in treatment and prognosis. Am. J. Orthod. 1948, 34, 812–840. [Google Scholar] [CrossRef] [PubMed]
- Skieller, V.; Björk, A.; Linde-Hansen, T. Prediction of mandibular growth rotation evaluated from a longitudinal implant sample. Am. J. Orthod. 1984, 86, 359–370. [Google Scholar] [CrossRef] [PubMed]
- Kolodziej, R.P.; Southard, T.E.; Southard, K.A.; Casko, J.S.; Jakobsen, J.R. Evaluation of antegonial notch depth for growth prediction. Am. J. Orthod. Dentofac. Orthop. 2002, 121, 357–363. [Google Scholar] [CrossRef]
- Solow, B.; Siersb, S. Cervical and craniocervical posture as predictors of cranofacial growth. Am. J. Orthod. Dentofac. Orthop. 1992, 101, 449–458. [Google Scholar] [CrossRef]
- Rossouw, P.; Lombard, C.; Harris, A. The frontal sinus and mandibular growth prediction. Am. J. Orthod. Dentofac. Orthop. 1991, 100, 542–546. [Google Scholar] [CrossRef]
- Kjær, I. Sella turcica morphology and the pituitary gland—a new contribution to craniofacial diagnostics based on histology and neuroradiology. Eur. J. Orthod. 2012, 37, 28–36. [Google Scholar] [CrossRef]
- Alkofide, E.A. Sella Turcica Morphology and Dimensions in Cleft Subjects. Cleft Palate-Craniofacial J. 2008, 45, 647–653. [Google Scholar] [CrossRef]
- Sathyanarayana, H.P.; Kailasam, V.; Chitharanjan, A.B. The Size and Morphology of Sella Turcica in Different Skeletal Patterns among South Indian Population: A Lateral Cephalometric Study. J. Indian Orthod. Soc. 2013, 47, 266–271. [Google Scholar] [CrossRef]
- Miletich, I.; Sharpe, P.T. Neural crest contribution to mammalian tooth formation. Birth Defects Res. Part C Embryo Today Rev. 2004, 72, 200–212. [Google Scholar] [CrossRef]
- Afzal, E.; Fida, M. Association Between Variations in Sella Turcica Dimensions and Morphology and Skeletal Malocclusions. J. Ayub Med. Coll. Abbottabad JAMC 2019, 31, 172–177. [Google Scholar] [PubMed]
- Becktor, J.; Einersen, S.; Kjær, I. A sella turcica bridge in subjects with severe craniofacial deviations. Eur. J. Orthod. 2000, 22, 69–74. [Google Scholar] [CrossRef] [PubMed]
- Sundareswaran, S.; Vijayan, R.; Nair, P.S.; Vadakkepediyakkal, L.; Sathyanadhan, S. Cephalometric Appraisal of the Sella Turcica—A Literature Review. Iran. J. Orthod. 2019, 14, 1–9. [Google Scholar] [CrossRef]
- Baidas, L.F.; Al-Kawari, H.M.; Al-Obaidan, Z.; Al-Marhoon, A.; Al-Shahrani, S. Association of sella turcica bridging with palatal canine impaction in skeletal Class I and Class II. Clin. Cosmet. Investig. Dent. 2018, 10, 179–187. [Google Scholar] [CrossRef]
- Sathyanarayana, H.P.; Kailasam, V.; Chitharanjan, A.B. Sella turcica-Its importance in orthodontics and craniofacial morphology. Dent. Res. J. 2013, 10, 571–575. [Google Scholar]
- Sinha, S.; Shetty, A.; Nayak, K. The morphology of Sella Turcica in individuals with different skeletal malocclusions—A cephalometric study. Transl. Res. Anat. 2020, 18, 100054. [Google Scholar] [CrossRef]
- Suchita, T.; Sontakke, K.D.; Pooja, J.T.; Harsha, J.K.; Namrata, V.S. A Study to Evaluate Relationship of Sella Turcica with Different Skeletal Malocclusion on Lateral Cephalometric Radiograph. J. Res. Adv. Dent. 2022, 13, 1–4. [Google Scholar]
- Ahmad, N.; Shah, W.A.; Shaheed, S. The frequency of sella turcica bridging in orthodontic patients and its association with sagittal and vertical malocclusion groups. Pak. Oral Dent. J. 2017, 37, 257–261. [Google Scholar]
- Scribante, A.; Sfondrini, M.F.; Cassani, M.; Fraticelli, D.; Beccari, S.; Gandini, P. Sella turcica bridging and dental anomalies: Is there an association? Int. J. Paediatr. Dent. 2017, 27, 568–573. [Google Scholar] [CrossRef]
- Saokar, P.; Dinesh, M.R.; Shetty, A. A correlative study of sella turcica bridging and dental anomalies related to size, shape, structure, number and eruption of teeth. J. Orthod. Sci. 2022, 11, 2. [Google Scholar] [CrossRef]
- Jankowski, T.; Jedliński, M.; Grocholewicz, K.; Janiszewska-Olszowska, J. Sella Turcica Morphology on Cephalometric Radiographs and Dental Abnormalities—Is There Any Association?—Systematic Review. Int. J. Environ. Res. Public Health 2021, 18, 4456. [Google Scholar] [CrossRef] [PubMed]
- Naumova-Trencheska, M.; Misevska, C.B.; Emini, V.K.; Arifi, A. Evaluation of the morphological characteristics of the sella turcica with the appearance of skeletal malocclusions and dental anomalies—A review. Knowl. Int. J. 2023, 56, 319–322. [Google Scholar]
- Drenski Balija, N.; Aurer, B.; Meštrović, S.; Lapter Varga, M. Prevalence of Dental Anomalies in Orthodontic Patients. Acta Stomatol. Croat. 2022, 56, 61–68. [Google Scholar] [CrossRef] [PubMed]
- Motwani, M.B.; Biranjan, R.; Dhole, A.; Choudhary, A.B.; Mohite, A. A Study to Evaluate the Shape and Size of Sella Turcica and Its Correlation with the Type of Malocclusion on Lateral Cephalometric Radiographs. IOSR J. Dent. Med. Sci. 2017, 16, 126–132. [Google Scholar] [CrossRef]
- Dvortsin, D.P.; Ye, Q.; Pruim, G.J.; Dijkstra, P.U.; Ren, Y. Reliability of the integrated radiograph-photograph method to obtain natural head position in cephalometric diagnosis. Angle Orthod. 2011, 81, 889–894. [Google Scholar] [CrossRef]
- Axelsson, S.; Storhaug, K.; Kjær, I. Post-natal size and morphology of the sella turcica. Longitudinal cephalometric standards for Norwegians between 6 and 21 years of age. Eur. J. Orthod. 2004, 26, 597–604. [Google Scholar] [CrossRef]
- Silverman, F.N. Roentgen standards fo-size of the pituitary fossa from infancy through adolescence. Am. J. Roentgenol. Radium Ther. Nucl. Med. 1957, 78, 451–460. [Google Scholar]
- Roomaney, I.A.; Chetty, M. Sella turcica morphology in patients with genetic syndromes: A systematic review. Orthod. Craniofacial Res. 2021, 24, 194–205. [Google Scholar] [CrossRef]
- Proffit, W.R.; Fields, H.; Msd, D.M.; Larson, B.; Sarver, D.M. Contemporary Orthodontics, 6e: South Asia Edition-E-Book; Elsevier: Bengaluru, India, 2019; pp. 179–181. [Google Scholar]
- Ozdemir, F.; Tozlu, M.; Germec-Cakan, D. Cortical bone thickness of the alveolar process measured with cone-beam computed tomography in patients with different facial types. Am. J. Orthod. Dentofac. Orthop. 2013, 143, 190–196. [Google Scholar] [CrossRef]
- Yan, S.; Huang, S.; Wu, Z.; Liu, Y.; Men, Y.; Nie, X.; Guo, J. A CBCT Investigation of the Sella Turcica Dimension and Sella Turcica Bridging in Different Vertical Growth Patterns. J. Clin. Med. 2023, 12, 1890. [Google Scholar] [CrossRef]
- Bassey, O.E.; Chiegwu, H.U.; Ohagwu, C.C.; Ogolodom, M.P.; Ugwuanyi, D.C.; Okpaleke, M.S.; Mbaba, A.N. Sella Turcica Dimensions and Morphology in a Yoruba Ethnic Population: A Computed Tomography Study. Int. J. Health Sci. Res. 2021, 11, 270–276. [Google Scholar] [CrossRef]
- Shrestha, G.K.; Pokharel, P.R.; Gyawali, R.; Bhattarai, B.; Giri, J. The morphology and bridging of the sella turcica in adult orthodontic patients. BMC Oral Health 2018, 18, 45. [Google Scholar] [CrossRef] [PubMed]
- Valizadeh, S.; Shahbeig, S.; Mohseni, S.; Azimi, F.; Bakhshandeh, H. Correlation of Shape and Size of Sella Turcica with the Type of Facial Skeletal Class in an Iranian Group. Iran J. Radiol. 2015, 12, e16059. [Google Scholar] [CrossRef] [PubMed]
- Al-Mohana, R.A.A.M.; Muhammed, F.K.; Li, X.; Lubamba, G.P. The bridging and normal dimensions of sella turcica in Yemeni individuals. Oral Radiol. 2022, 38, 162–170. [Google Scholar] [CrossRef] [PubMed]
- Atilla, A.O.; Ozturk, T.; Yagci, A. Comparison of cervical vertebral anomalies and sella turcica bridging in different growth stages with various vertical skeletal growth patterns. Surg. Radiol. Anat. 2021, 43, 117–125. [Google Scholar] [CrossRef]
- Kaya, Y.; Öztaş, E.; Goymen, M.; Keskin, S. Sella turcica bridging and ponticulus posticus calcification in subjects with different dental anomalies. Am. J. Orthod. Dentofac. Orthop. 2021, 159, 627–634. [Google Scholar] [CrossRef]
- Karaman, A.; Cigerim, S.C.; Kechagia, N. Evaluation of the Relationship between Sella Turcica Bridging and Dental Anomalies. J. Dent. Indones. 2021, 28, 76–81. [Google Scholar] [CrossRef]
- Jankowski, T.; Jedliński, M.; Schmeidl, K.; Grocholewicz, K.; Janiszewska-Olszowska, J. Sella Turcica Abnormalities, Dental Age and Dental Abnormalities in Polish Children. Int. J. Environ. Res. Public Health 2021, 18, 10101. [Google Scholar] [CrossRef]
- Alam, M.K.; Alfawzan, A.A. Evaluation of Sella Turcica Bridging and Morphology in Different Types of Cleft Patients. Front. Cell Dev. Biol. 2020, 8, 656. [Google Scholar] [CrossRef]
- Leonardi, R.; Farella, M.; Cobourne, M.T. An association between sella turcica bridging and dental transposition. Eur. J. Orthod. 2011, 33, 461–465. [Google Scholar] [CrossRef]
- Islam, M.; Alam, M.K.; Yusof, A.; Kato, I.; Honda, Y.; Kubo, K.; Maeda, H. 3D CT Study of Morphological Shape and Size of Sella Turcica in Bangladeshi Population. J. Hard Tissue Biol. 2017, 26, 1–6. [Google Scholar] [CrossRef]
- Olubunmi, O.P.; Yinka, O.S.; Oladele, O.J.; Adimchukwunaka, G.A.; Afees, O.J. An Assessment of the Size of Sella Turcica Among Adult Nigerians Resident in Lagos. Int. J. Med. Imaging 2016, 4, 12–16. [Google Scholar] [CrossRef]
- Nagaraj, T.; Shruthi, R.; James, L.; Keerthi, I.; Balraj, L.; Goswami, R.D. The size and morphology of sella turcica: A lateral cephalometric study. J. Med. Radiol. Pathol. Surg. 2015, 1, 3–7. [Google Scholar] [CrossRef]
- Hasan, H.A.; Alam, M.K.; Yusof, A.; Mizushima, H.; Kida, A.; Osuga, N. Size and Morphology of Sella Turcica in Malay populations: A 3D CT Study. J. Hard Tissue Biol. 2016, 25, 313–320. [Google Scholar] [CrossRef]
- Nadim, M.A. Correlation of linear dimensions of sella turcica with anteroposterior skeletal jaw relationship of Egyptian subjects using CBCT. Egypt. Dent. J. 2019, 65, 63–68. [Google Scholar] [CrossRef]
- Moslemzadeh, S.H.; Moghaddam, N.; Moghaddam, S.F.; Rafighi, A.; Ghojazadeh, M.; Rasouli, F. Relationship Between Bridging and Dimensions of Sella Turcica and Antero-Posterior Skeletal Malocclusions in Children. Iran. J. Orthod. 2016, 11, 1–5. [Google Scholar] [CrossRef]
- Taghiloo, H.; Ahadzadeh, F.; Asadi, M.H.; Jordehi, A.Y. Relationship between the dimensions of Sella Turcica with the vertical skeletal pattern of the face on cone beam computed tomography (CBCT) images in an Iranian population. J. Res. Dent. Sci. 2020, 17, 318–326. [Google Scholar] [CrossRef]
Figure 1.
ST morphological types: (1) normal, (2) oblique anterior wall, (3) ST bridge, (4) double contour of the floor, (5) irregularity of the dorsum sellae, and (6) pyramidal-shaped dorsum sellae.
Figure 1.
ST morphological types: (1) normal, (2) oblique anterior wall, (3) ST bridge, (4) double contour of the floor, (5) irregularity of the dorsum sellae, and (6) pyramidal-shaped dorsum sellae.
Figure 2.
(a) Reference lines used for measurement of ST size: A, tuberculum sellae; B, dorsum sellae; C, the furthest point to dorsum sellae; and D, base of the pituitary fossa. 1, length of ST; 2, ST diameter; and 3, ST depth. (b) Scanora version 2.6.2.1 software environment.
Figure 2.
(a) Reference lines used for measurement of ST size: A, tuberculum sellae; B, dorsum sellae; C, the furthest point to dorsum sellae; and D, base of the pituitary fossa. 1, length of ST; 2, ST diameter; and 3, ST depth. (b) Scanora version 2.6.2.1 software environment.
Table 1.
Measures of central dispersion for the length, depth, and diameter of the ST in millimeters (n = 550).
Table 1.
Measures of central dispersion for the length, depth, and diameter of the ST in millimeters (n = 550).
| Variable | Minimum | Maximum | Mean | Std. Deviation |
|---|---|---|---|---|
| Length | 0 | 12 | 6.81 | 2.49 |
| Depth | 3.5 | 13 | 7.26 | 1.53 |
| Diameter | 6 | 16 | 10.37 | 1.77 |
Table 2.
Correlation of the ST morphology with anteroposterior skeletal pattern.
| Variable | ST Morphology | p-Value | ||||||
|---|---|---|---|---|---|---|---|---|
| Normal | Oblique Anterior Wall | ST Bridge | Double Floor Contour | Irregular Dorsum Sellae | Pyramidal Dorsum Sellae | |||
| Class I | Number | 117 | 30 | 39 | 18 | 16 | 12 | 0.009 |
| Percentage | 50.4 | 12.9 | 16.8 | 7.8 | 6.9 | 5.2 | ||
| Class II | Number | 122 | 28 | 51 | 8 | 16 | 15 | |
| Percentage | 50.8 | 11.7 | 21.3 | 3.3 | 6.7 | 6.3 | ||
| Class III | Number | 27 | 8 | 22 | 1 | 12 | 8 | |
| Percentage | 34.6 | 10.3 | 28.2 | 1.3 | 15.4 | 10.3 | ||
Table 3.
Correlation of the ST dimensions with anteroposterior skeletal pattern.
| ST Dimensions | Anteroposterior Skeletal Pattern | Mean | Std. Deviation | Minimum | Maximum | p-Value |
|---|---|---|---|---|---|---|
| Length | Class I | 7.06 | 2.37 | 0 | 12 | 0.128 |
| Class II | 6.62 | 2.49 | 0 | 12 | ||
| Class III | 6.65 | 2.79 | 0 | 12 | ||
| Depth | Class I | 7.32 | 1.50 | 4.5 | 13 | 0.677 |
| Class II | 7.22 | 1.63 | 3.5 | 13 | ||
| Class III | 7.17 | 1.28 | 5 | 11 | ||
| Diameter | Class I | 10.49 | 1.77 | 6 | 16 | 0.180 |
| Class II | 10.36 | 1.73 | 6 | 15 | ||
| Class III | 10.06 | 1.89 | 6 | 15 |
Table 4.
Correlation of the ST morphology with vertical skeletal pattern.
| Variable | ST Morphology | p-Value | ||||||
|---|---|---|---|---|---|---|---|---|
| Normal | Oblique Anterior Wall | ST Bridge | Double Contour of Floor | Irregularity in the Dorsum Sellae | Pyramidal-Shaped Dorsum Sellae | |||
| Short face | Number | 22 | 6 | 15 | 1 | 5 | 3 | 0.466 |
| Percentage | 42.3 | 11.5 | 28.8 | 1.9 | 9.6 | 5.8 | ||
| Normal | Number | 163 | 38 | 56 | 16 | 20 | 23 | |
| Percentage | 51.6 | 12 | 17.7 | 5.1 | 6.3 | 7.3 | ||
| Long face | Number | 81 | 22 | 41 | 10 | 19 | 9 | |
| Percentage | 44.5 | 12.1 | 22.5 | 5.5 | 10.4 | 4.9 | ||
| Total | Number | 266 | 66 | 112 | 27 | 44 | 35 | |
| Percentage | 48.4 | 12 | 20.4 | 4.9 | 8 | 6.4 | ||
The Chi-square test showed no significant correlation between the ST morphology and the vertical skeletal pattern (p > 0.05).
Table 5.
Correlation of the ST dimensions with vertical skeletal pattern.
| ST Dimensions | Vertical Facial Form | Mean | Std. Deviation | Minimum | Maximum | p-Value |
|---|---|---|---|---|---|---|
| Length | Short face | 7.09 | 2.93 | 1 | 12 | 0.644 |
| Normal face | 6.82 | 2.48 | 0 | 12 | ||
| Long face | 6.72 | 2.36 | 0 | 12 | ||
| Depth | Short face | 7.41 | 1.64 | 4.5 | 13 | 0.450 |
| Normal face | 7.19 | 1.52 | 4 | 13 | ||
| Long face | 7.33 | 1.51 | 3.5 | 13 | ||
| Diameter | Short face | 10.99 | 2.02 | 6 | 15 | 0.18 |
| Normal face | 10.37 | 1.67 | 6 | 15 | ||
| Long face | 10.20 | 1.84 | 6 | 16 |
One-way ANOVA showed no significant correlation in this regard (p > 0.05).
Table 6.
Correlation of the ST morphology and dental anomalies.
| Dental Anomaly | ST Morphology | p-Value | ||||||
|---|---|---|---|---|---|---|---|---|
| Normal | Oblique Anterior Wall | ST Bridge | Double Contour of Floor | Irregularity in the Dorsum Sellae | Pyramidal-Shaped Dorsum Sellae | |||
| No anomaly | Number | 178 | 30 | 27 | 12 | 23 | 18 | 0.001 |
| Percentage | 61.8 | 10.4 | 9.4 | 4.2 | 8 | 6.3 | ||
| Hyperdontia | Number | 10 | 3 | 6 | 1 | 0 | 1 | 0.764 |
| Percentage | 47.6 | 14.3 | 28.6 | 4.8 | 0 | 4.8 | ||
| Microdontia | Number | 4 | 8 | 10 | 0 | 1 | 4 | 0.01 |
| Percentage | 14.8 | 29.6 | 37 | 0 | 3.7 | 14.8 | ||
| Impaction | Number | 20 | 5 | 30 | 5 | 12 | 5 | 0.001 |
| Percentage | 26 | 6.5 | 39 | 6.5 | 15.6 | 6.5 | ||
| Transposition | Number | 7 | 4 | 5 | 1 | 1 | 1 | 0.78 |
| Percentage | 36.8 | 21.1 | 26.3 | 5.3 | 5.3 | 5.3 | ||
| Hypodontia | Number | 13 | 4 | 12 | 2 | 2 | 3 | 0.42 |
| Percentage | 36.1 | 11.1 | 33.3 | 5.6 | 5.6 | 8.3 | ||
| Third molar missing | Number | 34 | 12 | 22 | 6 | 5 | 3 | 0.029 |
| Percentage | 41.5 | 14.6 | 26.8 | 7.3 | 6.1 | 3.7 | ||
Table 7.
Correlation of the ST dimensions and dental anomalies.
| Variable | Mean | Std. Deviation | Minimum | Maximum | p-Value | |
|---|---|---|---|---|---|---|
| ST length | No anomaly | 7.010 | 2.2708 | 1 | 12 | 0.474 |
| Hyperdontia | 6.310 | 2.7041 | 0 | 12 | ||
| Microdontia | 6.481 | 3.0047 | 0 | 11 | ||
| Impaction | 6.396 | 2.8508 | 0 | 12 | ||
| Transposition | 6.711 | 2.8786 | 2.5 | 11.5 | ||
| Missing | 6.917 | 2.3770 | 1 | 11 | ||
| Third molar missing | 6.701 | 2.5782 | 1.5 | 12 | ||
| ST depth | No anomaly | 7.230 | 1.5132 | 4 | 13 | 0.500 |
| Hyperdontia | 6.881 | 1.7742 | 3.5 | 10 | ||
| Microdontia | 6.926 | 1.4787 | 4.5 | 10 | ||
| Impaction | 7.448 | 1.6575 | 4 | 12 | ||
| Transposition | 6.974 | 1.4383 | 5 | 10 | ||
| Missing | 7.431 | 1.4099 | 4 | 10 | ||
| Third molar missing | 7.366 | 1.4846 | 5 | 13 | ||
| ST diameter | No anomaly | 10.411 | 1.7290 | 6 | 15 | 0.657 |
| Hyperdontia | 10.405 | 2.0834 | 6 | 15 | ||
| Microdontia | 10.278 | 1.2810 | 8 | 12 | ||
| Impaction | 10.364 | 1.9912 | 6 | 15 | ||
| Transposition | 10.079 | 1.7342 | 7 | 13 | ||
| Missing | 10.792 | 1.7045 | 8 | 16 | ||
| Third molar missing | 10.140 | 1.8296 | 6 | 15 | ||
Table 8.
ST morphology based on gender.
| Variable | Gender | Total | p-Value | |||
|---|---|---|---|---|---|---|
| Female | Male | |||||
| ST morphology | Normal | Number | 193 | 73 | 266 | 0.028 |
| Percentage | 72.6 | 27.4 | 100 | |||
| Anterior oblique wall | Number | 39 | 27 | 66 | ||
| Percentage | 59.1 | 40.9 | 100 | |||
| ST bridge | Number | 79 | 33 | 112 | ||
| Percentage | 70.5 | 29.5 | 100 | |||
| Double contour of floor | Number | 21 | 6 | 27 | ||
| Percentage | 77.8 | 22.2 | 100 | |||
| Irregularity of the dorsum sellae | Number | 26 | 18 | 44 | ||
| Percentage | 59.1 | 40.9 | 100 | |||
| Pyramidal-shaped dorsum sellae | Number | 18 | 17 | 35 | ||
| Percentage | 51.4 | 48.6 | 100 | |||
| Total | Number | 376 | 174 | 550 | ||
| Percentage | 68.4 | 31.6 | 100 | |||
Table 9.
Correlation of the ST dimensions and gender.
| ST Dimensions | Gender | Mean | Std. Deviation | p-Value |
|---|---|---|---|---|
| Length | Female | 6.662 | 2.4515 | 0.042 |
| Male | 7.126 | 2.5435 | ||
| Depth | Female | 7.306 | 1.5486 | 0.267 |
| Male | 7.150 | 1.4848 | ||
| Diameter | Female | 10.375 | 1.7822 | 0.937 |
| Male | 10.362 | 1.7630 |
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Mortezai, O.; Rahimi, H.; Tofangchiha, M.; Radfar, S.; Ranjbaran, M.; Pagnoni, F.; Reda, R.; Testarelli, L. Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions. Diagnostics 2023, 13, 3088. https://doi.org/10.3390/diagnostics13193088
AMA Style
Mortezai O, Rahimi H, Tofangchiha M, Radfar S, Ranjbaran M, Pagnoni F, Reda R, Testarelli L. Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions. Diagnostics. 2023; 13(19):3088. https://doi.org/10.3390/diagnostics13193088
Chicago/Turabian StyleMortezai, Omid, Haniyeh Rahimi, Maryam Tofangchiha, Sina Radfar, Mehdi Ranjbaran, Francesco Pagnoni, Rodolfo Reda, and Luca Testarelli. 2023. "Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions" Diagnostics 13, no. 19: 3088. https://doi.org/10.3390/diagnostics13193088
APA StyleMortezai, O., Rahimi, H., Tofangchiha, M., Radfar, S., Ranjbaran, M., Pagnoni, F., Reda, R., & Testarelli, L. (2023). Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions. Diagnostics, 13(19), 3088. https://doi.org/10.3390/diagnostics13193088
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
