Minimally Invasive Postero-Inferior Sacroiliac Joint Fusion: Surgical Technique and Procedural Details
Round 1
Reviewer 1 Report
This study reports on a “ ten-step” minimal invasive surgical procedure associated via a postero-inferior approach using a Sacroiliac Joint Fusion System. The authors postulated that implanting the device through the subchondral bone, provides maximum fixation and stabilization of the iliosacral joint while the approach to the iliosacral joint from the inferior trajectory also places the implant perpendicular to the S1 endplate . And the authors concluded that further l data from clinical experience are encouraged to further validate this procedure as minimally-invasive method for SIJ fusion.
There are several reports published since about 10 years ago reporting on MIS surgical techniques.
However Interesting technical note on a single MIS system . In the methods section I see no details of the surgical technique? What anthropometric data of the patients included in this study? There is no control group for biomechanical comparison. DEXA was done?
Furthermore, there are no real actual data regarding complications and fusion rates since this technique to be established clinical data and follow up > 2 years are needed.
Results
“… both the iliac and sacral joint” I am wondering if the authors could correct it to iliosacral joint?
Figure 1 belongs to methods section.
Figure 3 : “’…the Steinmann pin has passed the posterior cortical outline of the sacrum, and is docked in the sacrum at or near center of the first sacral body (Figure 3)” Sorry but this Steinman is far below the S1 vertebral body.
“the incision will start lateral to the apex of the posterior superior iliac spine, the incision should also be slightly lateral to the postero-inferior joint line” I am confused with this description/ which was the length of the incision?
What is “ Under fluoroscopic guidance using the inlet view, advance a Steinmann pin starting inferior, ventral” I cannot get it
I would recommend the authors to add a schematic representation of each step of the surgery.
Figure 7 is not sharp, not clear, for me. How to get out of trample, to avoid misguidance ?
Figure 8. I see the screw-system the length is rather too short. Did the authors make a biomechanical testing ?
Cost-effectiveness study?
I understand there was just one patient in which the system was implanted? Am I right ?
English is excellent!
Author Response
Response to Reviewer 1
This study reports on a “ ten-step” minimal invasive surgical procedure associated via a postero-inferior approach using a Sacroiliac Joint Fusion System. The authors postulated that implanting the device through the subchondral bone, provides maximum fixation and stabilization of the iliosacral joint while the approach to the iliosacral joint from the inferior trajectory also places the implant perpendicular to the S1 endplate . And the authors concluded that further l data from clinical experience are encouraged to further validate this procedure as minimally-invasive method for SIJ fusion.
There are several reports published since about 10 years ago reporting on MIS surgical techniques.
However interesting technical note on a single MIS system . In the methods section I see no details of the surgical technique? What anthropometric data of the patients included in this study? There is no control group for biomechanical comparison. DEXA was done?
We appreciate the comment regarding your interest in this technique and procedure. We elected to include the details of the surgical procedure as separate sections and subsections following the Methods section due to length (see Sections 3.2 to 3.3.9).
This article is solely descriptive of the procedure and contains no patient data.
Furthermore, there are no real actual data regarding complications and fusion rates since this technique to be established clinical data and follow up > 2 years are needed.
As a procedural description article, this paper does not include long-term patient reported outcomes, complications or imaging data. Clinical findings with respect to this SIJ fixation system will be forthcoming in subsequent publications.
Results
“… both the iliac and sacral joint” I am wondering if the authors could correct it to iliosacral joint?
We have made this modification.
Figure 1 belongs to methods section.
We have included Figure 1 in subsection 3.1, Structural Anatomy Overview, as it is most germane to this subsection.
Figure 3 : “’…the Steinmann pin has passed the posterior cortical outline of the sacrum, and is docked in the sacrum at or near center of the first sacral body (Figure 3)” Sorry but this Steinman is far below the S1 vertebral body.
We have altered this text to note the Steinmann pin is near the center of the second sacral body.
“the incision will start lateral to the apex of the posterior superior iliac spine, the incision should also be slightly lateral to the postero-inferior joint line” I am confused with this description/ which was the length of the incision?
The length of the incision is indicated in Section 3.3.5 as 2-3 cm in length. The current description provides the correct spatial geometry in three dimensions for this approach.
What is “ Under fluoroscopic guidance using the inlet view, advance a Steinmann pin starting inferior, ventral” I cannot get it
We have re-checked these procedural details, and the current description provides the correct spatial geometry in three dimensions for this approach.
I would recommend the authors to add a schematic representation of each step of the surgery.
As the procedure is conducted under fluoroscopy, we favor actual real-life fluoroscopic images to renderings of the procedure.
Figure 7 is not sharp, not clear, for me. How to get out of trample, to avoid misguidance ?
Figure 7 shows the implant going through the ilium, across the SI joint, and into the sacrum. This is visualized clearly in the left image, in particular.
Figure 8. I see the screw-system the length is rather too short. Did the authors make a biomechanical testing ?
Biomechanical testing data of this implant are being prepared for a subsequent publication.
Cost-effectiveness study?
We have not conducted a cost-effectiveness study with this implant, although such studies have been conducted for SIJ fusion in general.
I understand there was just one patient in which the system was implanted? Am I right ?
The images provided were drawn from several patients to provide the optimum visualization of each procedural step.
English is excellent!
Thank you.
Reviewer 2 Report
Well prepared and described surgical technique. Introduction can be more clarify. You should attach if possible some pictures from surgery. The discussion should be improved and add some newer references.
Author Response
Response to Reviewer 2
Well prepared and described surgical technique. Introduction can be more clarify. You should attach if possible some pictures from surgery. The discussion should be improved and add some newer references.
We appreciate your comments. As the procedure is conducted under fluoroscopy, we favored using actual real-life fluoroscopic images of the procedure. This article is strictly limited to providing the procedural details of this transfixing screw implantation approach. As such, we have restricted our discussion to the procedure itself; the introductory section provides the requisite current supporting references on SIJ fusion in general.
Reviewer 3 Report
This paper described the surgical procedure associated with the postero-inferior operative trajectory using the PsiF™DNA Sacroiliac Joint Fusion System.
This paper intended to provide the readers with the ten-step surgical procedure regarding The posterior surgical approach with an inferior operative trajectory (postero-inferior) utilizes easily identifiable landmarks to achieve a safest, direct access to the articular joint space for transfixing device placement.
The minimally invasive, transfixing SIJ fusion procedure can employ numerous operative trajectories. The authors proposed the postero-inferior trajectory allows implant placement in a safe operative corridor, originating at the inferior aspect of the joint, going through the ilium, across the sacroiliac joint space, and into the sacrum, transfixing the osseous confines of the ilium and sacrum across sub-chondral bone.
Even though the authors did not provide a really original way for SI fixation, the ten-step procedure was designed simply and described clearly. The readers could benefit from the method of this communication article.
I recommend this manuscript to be published in your journal.
Comments for author File: Comments.pdf
Author Response
Response to Reviewer 3
This paper described the surgical procedure associated with the postero-inferior operative trajectory using the PsiF™DNA Sacroiliac Joint Fusion System.
This paper intended to provide the readers with the ten-step surgical procedure regarding The posterior surgical approach with an inferior operative trajectory (postero-inferior) utilizes easily identifiable landmarks to achieve a safest, direct access to the articular joint space for transfixing device placement.
The minimally invasive, transfixing SIJ fusion procedure can employ numerous operative trajectories. The authors proposed the postero-inferior trajectory allows implant placement in a safe operative corridor, originating at the inferior aspect of the joint, going through the ilium, across the sacroiliac joint space, and into the sacrum, transfixing the osseous confines of the ilium and sacrum across sub-chondral bone.
Even though the authors did not provide a really original way for SI fixation, the ten-step procedure was designed simply and described clearly. The readers could benefit from the method of this communication article.
I recommend this manuscript to be published in your journal
We very much appreciate your comments.
Round 2
Reviewer 1 Report
The authors have adressed most of the comments. However my suggested revision regarding surgical tehnique images that is of major importance were not presented,
Author Response
Per the reviewer's request, we have now included several additional schematic renderings (Figures 3,9,10) that illustrate specific steps in the surgical technique.
Author Response File: Author Response.pdf