Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476

Steer, Julian; Greenslade, Mark; Marsh, Richard

doi:10.3390/met12010130

Open AccessCorrection

Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476

by

Julian Steer

^1,*

,

Mark Greenslade

² and

Richard Marsh

¹

Cardiff School of Engineering, Cardiff University, Queen’s Buildings, The Parade, Cardiff CF24 3AA, UK

²

Tata Steel UK, Port Talbot SA13 2NG, UK

^*

Author to whom correspondence should be addressed.

Metals 2022, 12(1), 130; https://doi.org/10.3390/met12010130

Submission received: 2 December 2021 / Accepted: 6 December 2021 / Published: 10 January 2022

Download

Browse Figure

Versions Notes

The authors wish to make the following corrections to this paper [1].

Error in Figure

In the original article, there was a mistake in Figure 4 when published. The diagram in Figure 4 has been duplicated; the bottom diagram is the correct schematic diagram. The corrected Figure 4 appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.

Figure 4. Schematic of drop tube furnace.

Reference

Steer, J.; Greenslade, M.; Marsh, R. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. [Google Scholar] [CrossRef]

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Steer, J.; Greenslade, M.; Marsh, R. Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. Metals 2022, 12, 130. https://doi.org/10.3390/met12010130

AMA Style

Steer J, Greenslade M, Marsh R. Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. Metals. 2022; 12(1):130. https://doi.org/10.3390/met12010130

Chicago/Turabian Style

Steer, Julian, Mark Greenslade, and Richard Marsh. 2022. "Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476" Metals 12, no. 1: 130. https://doi.org/10.3390/met12010130

APA Style

Steer, J., Greenslade, M., & Marsh, R. (2022). Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. Metals, 12(1), 130. https://doi.org/10.3390/met12010130

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI