Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196

Mostafa, Ahmad; Picazo Rubio, Ignacio; Brailovski, Vladimir; Jahazi, Mohammad; Medraj, Mamoun

doi:10.3390/met7080315

Open AccessErratum

Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196

by

Ahmad Mostafa

¹

,

Ignacio Picazo Rubio

¹,

Vladimir Brailovski

²,

Mohammad Jahazi

² and

Mamoun Medraj

^1,3,*

¹

Mechanical and Materials Engineering Department, Khalifa University of Science and Technology, Masdar Institute, P.O. Box 54224 Abu Dhabi, UAE

²

Department of Mechanical Engineering, École de Technologie Supérieure, 1100, Notre-Dame Street West, Montreal, QC H3C 1K3, Canada

³

Mechanical Engineering Department, Concordia University, 15151 Rue Sainte Catherine West, Montreal, QC H3G 2W1, Canada

^*

Author to whom correspondence should be addressed.

Metals 2017, 7(8), 315; https://doi.org/10.3390/met7080315

Submission received: 2 August 2017 / Revised: 3 August 2017 / Accepted: 7 August 2017 / Published: 16 August 2017

(This article belongs to the Special Issue Selective Laser Melting)

Download Versions Notes

The authors wish to make the following corrections to the main text in the published paper [1]. In this paper, the weight of CuCl₂ should be changed from 5 mg to 5 g to provide accurate recipe for the IN718 etchant. The etchant is a standard solution and its composition must be accurately reported as “5 g of CuCl₂, 100 cc of HCl and 100 cc of ethyl alcohol”. And the text “Figures 11 and 12” in the first paragraph under Section 3.1.3 should be replaced by “Figures 13 and 14” so the reader can make proper connection between the text and figures.

The authors apologize for any inconvenience caused by these changes. The manuscript will be updated online and the previous version will remain available from the article webpage.

Reference

Mostafa, A.; Picazo Rubio, I.; Brailovski, V.; Jahazi, M.; Medraj, M. Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196. [Google Scholar] [CrossRef]

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Mostafa, A.; Picazo Rubio, I.; Brailovski, V.; Jahazi, M.; Medraj, M. Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196. Metals 2017, 7, 315. https://doi.org/10.3390/met7080315

AMA Style

Mostafa A, Picazo Rubio I, Brailovski V, Jahazi M, Medraj M. Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196. Metals. 2017; 7(8):315. https://doi.org/10.3390/met7080315

Chicago/Turabian Style

Mostafa, Ahmad, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, and Mamoun Medraj. 2017. "Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196" Metals 7, no. 8: 315. https://doi.org/10.3390/met7080315

APA Style

Mostafa, A., Picazo Rubio, I., Brailovski, V., Jahazi, M., & Medraj, M. (2017). Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196. Metals, 7(8), 315. https://doi.org/10.3390/met7080315

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI