1. Introduction
Actinoplanes sp. SE50/110 (ATCC 31044), an aerobic Gram-positive spore-forming actinobacterium, produces the α-glucosidase inhibitor acarbose (acarviosyl-maltose). Acarbose is a pseudo-tetrasaccharide that blocks the active site of α-glucosidases, which inhibits the cleavage of polysaccharides. This reduces the rise in blood glucose levels after the consumption of starch-containing meals. Due to its ability to reduce postprandial hyperglycemia, acarbose has been utilized as an active ingredient in the treatment of diabetes mellitus type II [
1,
2]. In its natural habitat, this characteristic putatively provides a competitive advantage in food competition because the rival enzymes necessary for carbohydrate uptake are inhibited by acarbose, while its own secreted α-glucosidases are resistant [
3]. Thus, the hypothesis is that acarbose 7-phosphate is more abundant in cells than acarbose [
4].
The present understanding of carbohydrate metabolism in
Actinoplanes sp. SE50/110 relies mainly on a model founded through homology comparisons with other model organisms and current gene annotations [
5,
6,
7]. The disaccharide maltose plays a unique role in the culture media as it serves as the primary carbon source, providing energy and serving as a key precursor in acarbose biosynthesis [
8]. The interplay of carbohydrates plays a crucial role in the build-up and degradation of higher maltodextrins, which is essential for the formation of glycogen in
Actinoplanes sp. SE50/110. However, this understanding is in its infancy.
The metabolism of α-1,4-linked glucose polymers in the maltose/maltodextrin system has been extensively researched in multiple microorganisms [
9,
10,
11]. The
mal genes in
Escherichia coli (
E. coli) are regulated by MalT
Ec (MalT in
E. coli), a transcriptional activator that is induced by maltotriose and ATP and is crucial for the expression of the
mal genes [
11]. However, in
Actinoplanes sp. SE50/110 the maltose-dependent regulator MalT
As (MalT sequence homolog in
Actinoplanes sp. SE50/110) is not responsible for regulating genes involved in maltose metabolism [
12].
In
E. coli the most important roles are determined by the interplay of MalQ
Ec (MalQ in
E. coli) and MalP
Ec (MalP in
E. coli) [
11]. MalQ is a 4-α-glucanotransferase, that cleaves linear maltodextrins. The non-reducing maltodextrinyl moiety of the donor molecule is transferred onto another maltodextrin while the remaining reducing sugar end is released. According to recent studies, MalQ
Ec also converts short maltodextrins, such as maltose, to longer maltodextrins, whereas previous studies presumed that maltotriose was the smallest possible substrate [
9,
13]. In other organisms, such as
E. coli or
Corynebacterium glutamicum, the maltodextrin phosphorylase MalP
Ec/Cg (MalP in
E. coli, MalP in
C. glutamicum) plays a significant role alongside MalQ
Ec/Cg [
10,
14]. The activity of both enzymes complements each other, enabling efficient utilization of maltodextrins of different lengths. MalP
Ec/Cg phosphohydrolyzes the α-glucans built up by MalQ
Ec/Cg, resulting in glucose 1-phosphate that is available for glycolysis. In many bacteria [
11], a second α-glucan phosphorylase, encoded by the
glgP gene, has been characterized as glycogen phosphorylase. In
E. coli, the catalytic domains of both isoenzymes remain conserved, although variations have been detected in substrate preferences and regulation [
15]. Although both enzymes share the same catalytic mechanism, variations in substrate specificity were identified in
E. coli [
16]. GlgP
Ec (GlgP in
E. coli) catalyzes glycogen breakdown from outer chains, stops three to four residues from the first α-1,6 branching point and thereby generates a phosphatase-limited dextrin (pl dextrin) which is linearized by the debranching enzyme GlgX
Ec (GlgX in
E. coli) [
14,
17]. Linear maltodextrins can serve as substrates for other building or degrading enzymes.
Different regulatory mechanisms were discovered for
malPCg and
glgPCg genes in
C. glutamicum. GlgP
Cg (GlgP in
C. glutamicum) is constitutively expressed, while
malPCg expression is dependent on the carbon source [
18].
Streptomyces glaucescens GLA.O and
Streptomyces lividans TK23, which are taxonomically more closely related to
Actinoplanes sp., also lack the second α-glucan phosphorylase gene [
6]. This suggests a different role in the breakdown of maltodextrins and glycogen within this taxon [
6].
The maltose-induced α-glucosidase AmlE was deemed crucial for maltose metabolism in
Actinoplanes sp. SE50/110 based on in vivo studies and functional characterization assays [
6]. Furthermore, it is controlled by the AmlR transcriptional regulator. The hydrolase activity of AmlE was detected in raw protein extract assays in the wildtype for different α-1,4-glucans, resulting in the release of glucose [
6]. However, the absence of AmlE in a gene deletion mutant cannot be compensated by the activity of putative MalZ
As (MalZ in
Actinoplanes sp. SE50/110) and MalQ
As (MalQ in
Actinoplanes sp. SE50/110) proteins, leading to an inadequate supply of glucose [
6]. Interestingly, an
amlE homolog was identified within the
gac acarbose biosynthetic gene cluster of S.
glaucescens GLA.O. The precise categorization of AmlE within maltose/maltodextrin metabolism and the connection between acarbose and carbohydrate metabolism therefore remain unresolved.
Although acarbose is the main product,
Actinoplanes sp. SE50/110 also produces several acarviosyl metabolites, here referred to as impurities [
2,
19,
20]. All homologs have the acarviosyl unit consisting of C7-cyclitol and 4-amino-4,6-dideoxyglucose as the elementary core structure and differ in the attached sugar moieties [
21,
22]. The inhibitory spectrum varies with length. While low molecular weight pseudo-oligosaccharides tend to inhibit maltases and disaccaridases, longer homologs are more effective against α-amylases [
2,
21]. In 2014 [
8], the dependence of the provided carbon source and the formation of further acarviosyl metabolites were demonstrated. The variable saccharide moiety is supplied by the carbon source in the medium, imported and linked to the acarviosyl core structure [
8]. For the minor metabolites, the saccharide component must be produced intracellularly during maltose/maltodextrin and glycogen metabolism [
8].
The objective of this study is to functionally characterize enzymes that may be involved in maltose/maltodextrin metabolism through sequence homology comparisons, heterologous expression in E. coli and enzyme assays.
2. Materials and Methods
2.1. Bacterial Strains, Construction of Expression Vectors, and Culture Conditions
The bacterial strains utilized were
E. coli DH5α for plasmid construction and, for protein production,
E. coli BL21 (DE3) pLysS (
Table 1). The pJOE5751.1 vector, containing an N-terminal His
6-tag, was isolated with a GeneJET Plasmid Miniprep Kit (Thermo Fisher Scientific, Waltham, MA, USA) for inducible gene expression. The coding sequence (CDS) of each target gene to produce heterologous proteins was amplified via polymerase chain reaction (PCR) using genomic DNA isolated from
Actinoplanes sp. SE50/110. PCR products were purified from an agarose gel using the GeneJET Gel Extraction Kit (Thermo Fisher Scientific) and then cloned into the expression vector pJOE5751.1 using the Gibson Assembly (protocol from New England Biolabs, Ipswich, MA, USA). The assembled plasmids were transformed into
E. coli DH5α via heat shock and plated on selective LB agar plates (100 µg mL
−1 ampicillin (Amp)) and incubated at 37 °C. The plates were screened for positive transformants, and the nucleotide sequence was confirmed by sequencing. For high-efficiency protein production, the verified plasmids were transformed into
E. coli BL21 (DE3) pLysS.
2.2. Heterologous Protein Expression
Pre-cultures of E. coli BL21(DE3) pLysS were grown in 10 mL of LB (100 µg mL−1 Amp, 25 µg mL−1 chloramphenicol (Cm)) overnight at 37 °C and 200 rpm. For gene expression, 50–200 mL of LB (100 µg mL−1 Amp, 25 µg mL−1 Cm) was inoculated to an OD600 of 0.1. When an OD600 of 0.6–0.8 was reached, the temperature was set to 16 °C. To induce the protein expression L-Rhamnose (f.c., 0.2%) was added and the cultivation was continued for 16–20 h. Subsequently, the cells were harvested by centrifugation (10 min, 5500× g, 4 °C) and the supernatant was discarded. The cell pellets were resuspended in ice-cold 1× LEW buffer (Protino Ni-TED kit, Macherey-Nagel, Düren, Germany).
The cells were disrupted in tubes filled with Zirconia beads (0.1 and 0.5 mm in size, Carl Roth, Karlsruhe, Germany) using a homogenizer (Precellys 24 homogenizer, Bertin Technologies, Montigny le Bretonneux, France) with three cycles of 6500 rpm for 30 s and cooling intervals of 5 min on ice in between. A centrifugation step was performed to remove cell debris and beads (20 min, 21,000× g, 4 °C). The supernatants were transferred to a fresh 2 mL reaction tube and centrifuged to remove the remaining Zirconia beads. The crude extracts were applied to Protino® Columns and purification steps were performed according to the manual (Protino Ni-TED kit, Macherey-Nagel, Düren, Germany). Elution was performed in four steps of 500 µL each. The fractions were collected, and protein identities were confirmed by SDS-PAGE and MALDI-TOF-MS/MS analysis. For protein quantification according to the Bradford method, 1x Roti®-Quant reagent was utilized (Carl Roth, Sigma Aldrich (St. Louis, MI, USA)).
2.3. Substrates and Standards
For in vitro enzyme assays and analytical measurements different linear α-glucans were used as substrates and standards. Glucose (G1), maltose (G2), maltotriose (G3), sucrose (Suc), trehalose (Tre), and α-D-Glucose 1-phosphate were acquired from Carl Roth, Sigma Aldrich (St. Louis, MI, USA), or VWR (Radnor, PA, USA). Maltotetraose (G4), maltopentaose (G5), maltohexaose (G6), maltoheptaose (G7), maltooctaose (G8), and isomaltose (Iso) were purchased from Megazyme (Bray, Wicklow, Ireland). Acarbose (Acb) was manufactured and kindly provided by Bayer AG (Leverkusen, Germany). Glycogen from oysters was purchased from Thermo Fisher Scientific (Waltham, MA, USA). Acarbose 7-phosphate (Acb-7P) was synthesized from acarbose and ATP using AcbK as described by Nölting et al. [
4].
2.4. In Vitro Enzyme Assays
A modified enzyme assay based on the protocol of Seibold et al. (2009) [
10] was used to monitor all enzyme activities.
The 4-α-glucanotransferase activity of MalQAs was determined by the production of shortened and elongated α-glucans from a range of substrates (G2–G8, Acb, Acb-7P, Acb + G2, Acb-7P + G2). The products were analyzed by a continuous hexokinase/glucose 6-phosphatedehydrogenase assay, thin-layer chromatography (TLC), high-performance anion exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) analysis (HPAEC-PAD), and liquid chromatography–electrospray ionization mass spectrometry (LC-ESI-MS) analysis as described below.
To determine the initial substrate preferences of MalQ
As, the rate of glucose release from different substrates was measured spectrophotometrically [
10]. Each reaction mixture consisted of 50 mM potassium phosphate buffer (pH 7.0), 25 mM MgCl
2, 2 mM ATP, 2 mM NADP, 2 U hexokinase (Sigma Aldrich), 2 U glucose-6-phosphate dehydrogenase (Alfa Aesar by Thermo Fisher Scientific), and 5 mM of the corresponding substrate. The reaction mixtures without MalQ
As enzyme were pre-incubated in a 96-well plate (flat-bottom Nunc
TM 96-Well Polystyrene Plates from Thermo Scientific, Waltham, MA, USA) at 30 °C and the absorption at 340 nm was measured in a Tecan Infinite M200 microplate reader using i-control 10.1 software (Tecan Group AG, Männedorf, Switzerland). When there were no more fluctuations in the signal, MilliQ and purified enzyme were added to 200 µL to start the reaction. The released glucose was phosphorylated to glucose-6P by hexokinase. Glucose-6P served as a substrate for glucose-6P dehydrogenase and was oxidized to 6-phosphogluconolactone, while NADP was reduced to NADPH. The absorption maximum at 340 nm was measured. The increasing absorption corresponds to the equimolar amount of glucose released by the reduction of NADP
+ to NADPH [
10].
Glucose was used as the positive control and calibration curve. All samples were assayed in triplicate. The initial rate was calculated from the linear increase in the absorption during the first ten minutes.
The maltodextrin glucosidase activity of MalZAs and the α-glucosidase activity of AmlE were monitored by glucose release from different α-glucans (G2, G3, G4, G5, G8) at 30 °C by the hexokinase/glucose 6-phoshpate dehydrogenase assay as described above. The enzyme concentrations used were adjusted to 1 µM AmlE and 4 µM MalZAs for each substrate preference assays. Acarbose and acarbose 7-phosphate were used independently or in combination with maltose or maltotriose as substrates with 2 µM enzyme each, to assess the potential inhibitory effects of acarbose on the endogenous α-glucosidases.
Analogously, the activity of the α-glucan phosphorylase MalP
As was measured by an phosphoglucomutase/glucose 6-phoshpate dehydrogenase assay [
18]. Due to the phosphorolytic activity of 1 µM of purified MalP
As, glucose 1-phosphate was released from different α-glucans. The activity of a phosphoglucomutase converts glucose 1-phosphate to glucose 6-phosphate, which serves as a substrate for glucose 6-phosphate dehydrogenase, while NADP
+ is reduced to NADPH. As substrates, α-glucans of different lengths, ranging from maltose to maltooctaose, were tested.
2.5. Visualization of Enzyme Assay Products by Thin-Layer Chromatography (TLC)
TLC was used to differentiate the products formed in enzyme assays. All reaction mixtures contained 50 mM of potassium phosphate buffer (pH 7.0), 25 mM of MgCl
2, and 10 mM of α-glucan (G2, G3, G4, G5, G6, G7, G8) as a substrate in a total reaction volume of 20 µL. The reaction was initiated by adding 10 µM of purified enzyme and incubated at 30 °C for 5 h. For MalP assays, 5 mM of ATP was added. Silica gel 60 F254 plates (Sigma Aldrich) were used as the stationary phase and a mixture of 1-butanol, 2-propanol, ethanol, and water (3:2:3:2) as the mobile phase [
25]. To visualize the separated product spots, the silica plate was sprinkled with 4% (
w/
v) sulfuric acid in methanol and heated at 150 °C for 1 min until the darkened spots appeared.
2.6. HPAEC-PAD Analysis of MalQAs Reaction Products
For high-performance anion exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) analysis, MalQ
As samples were processed as described above for the TLC analysis. The Dionex ICS-6000 HPIC system (Thermo Fisher Scientific) was used for the quantification of α-1,4-glucans according to Nölting et al. (2023) [
4]. The samples were diluted 40-fold and 400-fold and a total volume of 20 µL was injected. At a flow rate of 1 mL min
−1, eluent A (166 mM of ammonium hydroxide) and eluent B (1 M of sodium acetate with 166 mM of ammonium hydroxide) were used with the following gradient: 6.5 min 10% B, 31.5 min 25% B, 34.0 min 25% B, and 44.0 min 10% B. For separation of linear α-glucans, a Dionex CarboPac PA100 column (250 × 4 mm, 8.5 µm, Thermo Fisher Scientific) coupled to a Dionex CarboPac PA100 Guard column (250 × 4 mm, 8.5 µm, Thermo Fisher Scientific) were used. Pulsed amperometric detection was performed at a system temperature of 30 °C using the gold, carbo, quad waveform with a non-disposable gold electrode and a AgCl reference electrode. Data evaluation was based on Chromeleon Chromatography Data System 7.2.10 software (Thermo Fisher Scientific).
2.7. Product Identification of MalQAs and MalPAs by LC-ESI-MS
For liquid chromatography–electrospray ionization mass spectrometry (LC-ESI-MS) measurement of acarviosyl metabolites, the reaction mixture of MalQAs contained 10 mM of purified enzyme, 50 mM of potassium phosphate buffer (pH 7.0), 25 mM of MgCl2, and 10 mM of substrate mixtures (G3 + Acb, G3 + Acb-7P) in a total volume of 100 µL was incubated at 30 °C for 5 h. Mixtures with heat-inactivated MalQAs were used as a negative control. To identify glucose 1-phosphate as a release product of MalPAs, 10 mM of ATP and maltoheptaose was added as a substrate. Reaction mixtures with heat-inactivated MalPAs were used as a negative control.
LC-ESI-MS measurements and analyses were performed as described by Nölting et al. (2023) [
4]. Mass spectrometry was used for identification of specific enzyme products. The experiment was set up on a micrOTOF-Q hybrid quadrupole/time-of-flight (QTOF) mass spectrometer (MS) equipped with an electrospray ionization (ESI) source (Bruker Daltonics in Billerica, MA, USA). MS was attached to an UltiMate 3000 HPLC system (Thermo Fisher Scientific). Eluent A consisted of an aqueous solution of ammonium formate (10 mM, pH 4.6), whereas eluent B was acetonitrile. The gradient for deposition was as follows: 0 min 80% B, 20 min 15% B, 22.5 min 15% B, 25 min 80% B, and 40 min 80% B. The detection range for MS was set from
m/z 400–1800 for acarviosyl metabolites in positive ionization mode and for MalP
As products in negative ionization mode. An iHILIC-(P) Classic column (150 × 2.1 mm, 5 μm, Hilicon AB, Umeå, Sweden) was used. Eluent A (20 mM of ammonium bicarbonate, pH 9.3) and eluent B (acetonitrile) were running as follows: 0 min 90% B, 30 min 25% B, 37.5 min 25% B, 45 min 90% B, and 60 min 90% B. A sample volume of 2 µL was injected for each sample and separated at a flow rate of 0.2 µL min
−1 by an Accucore 150-Amide-HILIC column (150 × 2.1 mm, 2.6 µm, Thermo Fisher Scientific).
Data evaluation was performed with the Compass DataAnalysis 4.2 software (Bruker Daltonics).
4. Discussion
Since identifying maltose as the most effective carbon source for producing acarbose in
Actinoplanes sp. SE50/110, understanding the mechanisms of maltose/maltodextrin metabolism and its potential connection to acarbose biosynthesis has become a focus of research. A first model presented by Schaffert et al. (2019) of the maltose/maltodextrin metabolism was established based on homology comparison to proteins of
E. coli and
C. glutamicum [
6]. Here, this model along with in vitro assays and heterologously produced enzyme with predicted functions were utilized to expand the current model [
6] (
Figure 6).
In a previous study, ACSP50_4430 was predicted to be a maltodextrin glucosidase MalZ
As [
6]. Here, the α-glucosidase activity with maltotriose as a minimal substrate size was confirmed. Moreover, it has been shown acarbose has no inhibitory effect on MalZ
As reactions and serves as a substrate for MalZ
As. Similar effects have been reported for MalZ
Ec in
E. coli [
3,
14]. However, unlike in
E. coli, acarbose is a potentially significant secondary metabolite for the survival strategy in
Actinoplanes sp. SE50/110. In previous proteome and transcriptome dynamics data based on
Actinoplanes sp. SE50/110 grown on maltose minimal medium, no MalZ
As protein was detected throughout the cultivation, whereas AmlE was consistently abundant [
28]. It is possible that regulatory effects enable the transcription and translation of MalZ
As under different conditions. The acarviosyl unit is attached to the sugar, maltose in the case of acarbose, and its production depends on the available carbon source in the medium [
8]. The impact of alternative carbon sources on MalZ
As expression has not been explored, so it is possible that it could affect the hydrolysis of larger acarviosyl metabolites. These investigations are still pending. Considering the low activity of MalZ
As compared to AmlE, a minor role in maltose/maltodextrin metabolism can be assumed for MalZ
As but maybe in the hydrolysis of acarviosyl metabolites.
Initial studies have indicated that the α-glucosidase AmlE plays a critical role in the assimilation of maltose in
Actinoplanes sp. SE50/110 [
6]. The substrate spectrum was expanded beyond maltose to include linear α-1,4-glucans in general. The ability of AmlE to hydrolyze various glycosidic bonds led to the hypothesis that it may be involved in numerous carbohydrate assimilation processes. However, the deletion resulted in the absence of maltase activity within the crude protein extract, and a lack of growth on maltose occurred, indicating that the primary function involves maltose metabolism [
6].
Here, we have verified the maltodextrin phosphorylase activity of MalP
As, even though it was previously hypothesized that
Actinoplanes sp. SE50/110 does not possess this activity. The substrate spectrum revealed that MalP
As functions as both a maltodextrin and glycogen phosphorylase. Linear α-glucans with at least four glycosyl residues as well as glycogen serve as a substrate. In 2009, in
C. glutamicum-only low-specific MalP
Cg activities for substrates smaller than maltopentaose were described as well [
18]. Furthermore, it was reported that the activities did not differ significantly when maltohexaose or maltopentaose was used as a substrate [
18]. Due to the absence of a second homolog, MalP
As in
Actinoplanes sp. SE50/110 could potentially have a dual function in maltose/maltodextrin metabolism and glycogen degradation. The classification of ACSP50_6911 as MalP
As or GlgP
As is not entirely clear. In
E. coli, MalQ
Ec and MalP
Ec are encoded in a single operon under the control of the maltose-dependent activator MalT
Ec, whereas
glgPEc is localized in the
glgCAP operon [
29]. In
Actinoplanes sp. SE50/110, both substrate spectra are covered by a single enzyme. After the initial classification of MalP
Cg and GlgP
Cg in
C. glutamicum, the classification system of bacterial α-glucan phosphorylases is later questioned based on new findings that MalP
Cg and GlgP
Cg substrate spectra overlap [
18]. The MalP
Cg activity is regulated by the presence of ADP-glucose, a postulated feature of GlgP
Cg [
18]. Although glycogen and maltodextrin phosphorylases follow the same catalytic mechanisms and the catalytic domain seems to be highly conserved and they differ in regulation, there is no evident explanation for substrate preference, neither for glycogen nor linear maltodextrins [
30]. It is postulated that binding branched oligosaccharides could cause a conformational change in the catalytic domain that may enhance affinity for glycogen [
31]. Since no information is currently available regarding the regulation of MalP
As in
Actinoplanes sp. SE50/110 and it is not situated within any known operon, the naming MalP
As is based on sequence homology comparisons with other organisms, wherein the similarities to MalP proteins are higher than to GlgP.
The putative MalQ
As protein was confirmed as a functional 4-glucanotransferase in
Actinoplanes sp. SE50/110 and the substrate and product spectrum have been expanded beyond previous assumptions. In various MalQ
Ec reactions, it is described that glucose is cleaved from the substrate and released [
14]. The remaining glucose is transferred to the non-reducing end of other α-glucans. When considering the distribution of chain lengths of products based on the previous assumption that glucose is cleaved from an α-glucan with a chain length
n and the remaining donor with a length
n − 1 is transferred, the acceptor would always need to be extended by the unit
n − 1. When maltotriose was used as the substrate, the acceptor was expected to be consistently extended by one maltose unit. As a result, substances such as maltopentaose and maltoheptaose might accumulate. However, it was also discovered that maltotetraose and maltohexaose were detected among the products, indicating that the cleavage is not specific to release only glucose. Studies of MalQ
Ec by Weiss et al. in 2015 [
13] demonstrated its ability to catalyze transglycosylation reactions in which glycosyl or dextrinyl units are transferred between linear maltodextrins of different lengths. These authors discovered that the equilibrium concentration of maltodextrin products is affected by the length of the initial substrate, with fewer glucose molecules released as the number of glycosidic bonds increased [
13]. Similar conclusions could be drawn for product distribution of MalQ
As in
Actinoplanes sp. SE50/110.
The connection between maltose/maltodextrin metabolism and acarbose biosynthesis is of particular industrial interest. The dependence of the biosynthesis of acarviosyl metabolites on the carbon source has been studied, and it has been found that maltose-containing media leads to an increased yield of acarviosyl-maltose (acarbose) [
8]. The sequence homolog of MalQ
As, AcbQ was identified to be involved in the modification of acarbose [
4]. The substrate spectrum of both enzymes overlaps within the group of linear α-glucans but differs in acarbose modification. AcbQ has the ability to synthesize multiple acarviosyl metabolites utilizing both acarbose and acarbose 7-phosphate as acceptor molecules [
4]. Conversely, MalQ
As can only elongate acarbose. This mechanism may serve to prevent MalQ
As from being involved in acarviosyl metabolite formation.
It is noteworthy that AmlE is sensitive to acarbose but not to acarbose 7-phosphate, as revealed by the inhibitory effect of acarbose on its internal α-glucosidase. The potential physiological role of phosphorylating acarbose to acarbose 7-phosphate to prevent its degradation during the synthesis of elongated acarviosyl metabolites was already considered and supported in this work by the in vitro results of AmlE in this study [
32].
Various acarviosyl impurities were identified during the industrial production of acarbose [
20,
33]. Initial successes have been achieved in eliminating impurities, such as component C [
34]. However, the elongated acarviosyl metabolites formed by attached glycosyl units, which are produced by the MalQ homolog AcbQ, are also considered undesirable impurities. Reducing the accumulation of large α-glucans by knocking out
malQAs or
acbQ may prevent the production of elongated acarviosyl metabolites. The potential substrate spectrum of MalZ
As within acarviosyl metabolites has not been fully characterized yet. However, since acarbose is a substrate, overexpression of
malZAs may reduce elongated acarviosyl metabolites. Decreasing the biosynthesis of large α-glucans or glycogen could increase the substrate pool for acarbose biosynthesis.