Next Article in Journal
Comparison of Perioperative Electrophysiological Measurements and Postoperative Results in Cochlear Implantation with a Slim Straight Electrode
Next Article in Special Issue
Reconfigurable Terahertz Moiré Frequency Selective Surface Based on Additive Manufacturing Technology
Previous Article in Journal
A Digital Twin-Based State Monitoring Method of Gear Test Bench
Previous Article in Special Issue
Strategic Development of Piezoelectric Nanogenerator and Biomedical Applications
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 13
Issue 5
10.3390/app13053290
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Review of Flexible Supercapacitors Using Carbon Nanotube-Based Electrodes

by
Yurim Han
1,
Heebo Ha
1,
Chunghyeon Choi
1,
Hyungsub Yoon
1,
Paolo Matteini
2,
Jun Young Cheong
3,* and
Byungil Hwang
1,*
1
School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
2
Institute of Applied Physics “Nello Carrara”, National Research Council, Via Madonna del Piano 10, 50019 Sesto Fiorentino, Italy
3
Bavarian Center for Battery Technology (BayBatt) and Department of Chemistry, University of Bayreuth, Universitätsstraße 30, 95447 Bayreuth, Germany
*
Authors to whom correspondence should be addressed.
Appl. Sci. 2023, 13(5), 3290; https://doi.org/10.3390/app13053290
Submission received: 7 February 2023 / Revised: 27 February 2023 / Accepted: 2 March 2023 / Published: 4 March 2023
(This article belongs to the Special Issue Printed Function Sensors and Materials)
Browse Figures
Versions Notes

Abstract

:
Carbon nanotube (CNT)-based electrodes in flexible supercapacitors have received significant attention in recent years. Carbon nanotube fiber fabrics (CNT-FF) have emerged as promising materials due to their high surface area, excellent conductivity, and mechanical strength. Researchers have attempted to improve the energy density and rate performance of CNT-FF supercapacitor electrodes through various strategies, such as functionalization with conductive materials like MnO2 nanoparticles and/or incorporation of graphene into them. In addition, the utilization of CNTs in combination with thin metal film electrodes has also gained widespread attention. Research has focused on enhancing electrochemical performance through functionalizing CNTs with conductive materials such as graphene and metal nanoparticles, or by controlling their morphology. This review paper will discuss the recent developments in supercapacitor technology utilizing carbon nanotube-based electrodes, including CNT fiber fabrics and CNTs on thin metal film electrodes. Various strategies employed for improving energy storage performance and the strengths and weaknesses of these strategies will be discussed. Finally, the paper will conclude with a discussion on the challenges that need to be addressed in order to realize the full potential of carbon nanotube-based electrodes in supercapacitor technology.

1. Introduction

Energy storage is a crucial aspect of modern society and is necessary to meet the growing demand for renewable and clean energy [1,2,3,4,5,6,7,8]. Supercapacitors, also known as electrochemical capacitors, are energy storage devices that have gained significant attention in recent years due to their high energy density and fast charging/discharging capability [9,10,11,12,13,14,15]. The development of new electrode materials has been an area of active research in supercapacitor technology, as this leads to improvements in energy and power density (Figure 1) [16,17,18,19,20,21,22].
Supercapacitors are generally divided into two categories: pseudo capacitors and electronic double layer supercapacitors (EDLCs) [24,25]. Pseudo capacitors accompany redox reaction at the surface of electrode. Otherwise, having non-faradaic reaction, EDLCs accumulate charges between the electrode and electrolyte by forming a double layer, so carbon materials such as carbon nanotubes (CNTs), carbon black (CB), and graphene are beneficial for a large interfacial area due to their porosity. Among them, CNTs have high electrical conductivity, specific surface area, chemical/thermal stability, and good contact with the electrolyte [16,26,27,28,29,30,31,32,33]. Carbon materials can also be formed in various dimensions such as 1D carbon fiber, 2D carbon film, and 3D carbon composite. Therefore, CNTs with those unique properties are expected to serve as EDLCs electrode materials in various forms of supercapacitor.
Synthesis and characterization of new materials are very important topics for several applications including supercapacitors [34,35,36,37,38]. One such promising material is carbon nanotube fiber fabrics (CNT-FF), which have emerged as a candidate for supercapacitor electrodes due to their combinatorial merits in high surface area, excellent conductivity, and mechanical strength [10,39]. CNT-FF is a type of fabric-like structure made by weaving together carbon nanotubes, which have high surface area and electrical conductivity. These unique properties of CNTs make them an excellent option for supercapacitor electrodes as they provide a large surface for charge storage and fast charging/discharging. Additionally, the high mechanical strength of CNT-FF makes it suitable for flexible devices, reducing the risk of mechanical degradation during cycling.
The focus of the research into the use of CNT fiber fabrics as supercapacitor was on boosting energy density and rate performance. Researchers have employed various strategies such as functionalizing CNT fiber fabrics with conductive materials such as graphene and metal nanoparticles, and incorporating these materials into hybrid CNT-based fiber fabrics. These efforts have resulted in impressive energy storage performance, including specific capacitance values of up to 402 F/g and energy densities of up to 28 Wh/kg. However, it is important to note that these studies were limited in their comparison with other electrode materials and their lack of information on the long-term stability and durability of CNT-FF electrodes, which are critical factors for practical applications.
Another promising approach in supercapacitor technology is the utilization of CNTs in combination with thin metal film electrodes. The combination of high surface area, electrical conductivity, and stability of CNTs with thin metal film electrodes has gained widespread attention in recent years. Research has been conducted to optimize the energy density and rate performance of supercapacitors utilizing this combination. One strategy for enhancing performance has involved functionalizing the CNTs with conductive materials, such as graphene and metal nanoparticles, while another method has involved controlling the morphology of the CNTs on thin metal films. These efforts have resulted in improved energy storage performance, including specific capacitance values of up to 300 F/g and improved rate performance.
This review paper will discuss the recent developments in supercapacitor technology utilizing carbon nanotube-based electrodes, including CNT fiber fabrics and CNTs on thin metal film electrodes. The various strategies employed for improving energy storage performance and the strengths and weaknesses of these strategies will be discussed. Finally, the paper will conclude with a discussion of the challenges that need to be addressed to realize the full potential of carbon nanotube-based electrodes in supercapacitor technology.

2. Flexible Supercapacitor with Various Types of CNT-Based Electrodes

2.1. CNT-FF-Based Electrodes

Supercapacitors, also known as electrochemical capacitors, have gained significant attention as energy storage devices in recent years due to their high energy density and fast charging/discharging capability. One of the key research areas in supercapacitors is the development of new electrode materials that can improve their energy and power density. CNT-FFs have emerged as promising materials for supercapacitor electrodes due to their unique combination of merits in high surface area, excellent conductivity, and mechanical strength.
CNT-FF is a type of fabric-like structure made by weaving carbon nanotubes together. The high surface area of the CNTs makes them excellent supercapacitor electrodes due to their large surface for charge storage. Their electrical conductivity is also much higher compared with other carbon-based materials, making fast charging and discharging reactions possible. Additionally, CNT-FF have a high mechanical strength, making them suitable for flexible devices and reducing the risk of mechanical degradation during cycling. Research into using CNT-FF as supercapacitor electrodes has been largely focused on boosting the energy density and rate performance. For example, in the work by Yang et al., researchers fabricated CNT-FF using a solution-blowing method as shown in Figure 2a, which resulted in a remarkable specific surface area of 15.995 m2/g [12]. When used as supercapacitor electrodes, the CNT-FF displayed impressive energy storage performance, including a specific areal capacitance of up to 353 mF/cm2 and an energy density of up to 247 μW/cm2. Strengths of this study include the high surface area of CNT-FF and the impressive energy storage performance. However, one potential weakness could be the scalability of the solution-blowing method used in creating the CNT-FF. Liang, Y., et al. knitted CNT yarns using a weaving machine followed by heating at 400 °C for 60 min under air condition [39]. After oxidation, the CNT-FF is immersed into HNO3 and H2SO4 solution and magnetically stirred at 45 °C for 60 min. Then, after cleaning with deionized water, vacuum drying is performed at 60 °C. This method exhibited improved cyclic voltammetry (CV) curves and longer discharge time compared with bare, oxidized, and acidized CHT-FF. High surface area and an additional oxygen-containing functional group by oxidation and acid treatment caused the increased capacitance of 1033 mF cm−2 at a current density of 2 mA cm−2. In addition, the activated CNT-FF had excellent cyclic capacitance retention for 10,000 cycles. This weaving process makes it easy to fabricate a large-scale electrode for flexible supercapacitor. Another work by Zhang et al. involved functionalizing CNT-FF with MnO2 nanoparticles to form hybrid CNT-MnO2 fiber fabrics (Figure 2b) [14]. The results showed improved electrochemical performance, with a specific capacitance reaching up to 231.3 F/g and an energy density of up to 86 nWh/cm. Strengths of this study include the significant improvement in electrochemical performance achieved through functionalization with MnO2 nanoparticles. However, one potential weakness could be the cost and scalability of synthesizing the MnO2 nanoparticles.
Researchers have also sought to enhance the mechanical and electrical conductivity of CNT-FF. This has been achieved through various strategies, such as incorporation of conductive materials such as graphene and metal nanoparticles or utilization of hybrid CNT-graphene fiber fabrics. For instance, Wang et al. coated CNT-FF with graphene to create hybrid CNT-graphene fiber fabrics (Figure 3a–f) [10]. These hybrid fiber fabrics showed improved conductivity and mechanical strength, with a specific capacitance of up to 350 mF/cm2. Strengths of this study include the improvement in electrical conductivity and mechanical strength achieved by using graphene. However, one potential weakness could be the cost and scalability of synthesizing graphene on a mass production scale. In the work by Arshad et al., CNT-FF were functionalized with NiO nanoparticles to form hybrid CNT-NiO fiber fabrics (Figure 3g) [1]. The resulting hybrid fiber fabrics demonstrated superior electrochemical performance, including a specific capacitance of up to 402 F/g and an energy density of up to 28 Wh/kg. Strengths of this study include the superior electrochemical performance achieved through functionalization with NiO nanoparticles. However, one potential weakness could be the cost and scalability of synthesizing the NiO nanoparticles.
The studies reported in these articles indicate that CNT-FF have the potential to be used as electrodes in high-performance supercapacitor devices, including flexible devices, asymmetric supercapacitors, aqueous supercapacitors, and devices integrated with photovoltaic cells. However, it is important to note that the studies were limited in their comparison with other electrode materials and their lack of information on the long-term stability and durability of CNT-FF electrodes, which are critical factors to their practical applications.

2.2. Carbon Nanotube on Thin Metal Film Electrodes

The utilization of CNTs in combination with thin metal film electrodes has gained widespread attention in recent years due to the high surface area, electrical conductivity, and stability of the CNTs. Research has been conducted to optimize the energy density and rate performance of supercapacitors utilizing CNTs on thin metal film electrodes.
One strategy for enhancing performance has involved functionalizing the CNTs with conductive materials such as graphene and metal nanoparticles. Shen et al. improved electrical conductivity by functionalizing CNTs on a Ti thin film with graphene (Figure 4a), resulting in a specific capacitance of 535.7 F/g and an energy density up to 26.1 Wh/Kg [40]. Meanwhile, another study by Shahrokhian et al. utilized Ni nanoparticles on CNTs on Cu thin films (Figure 4b,c), which resulted in a specific capacitance of 12.2 F/cm2 and improved rate performance [41]. Another method for improving the performance of CNTs on thin metal film electrodes is by controlling their morphology. Cheng et al. used a two-step growth process to synthesize CNTs on Ni thin films (Figure 4d,e), leading to a significant increase in surface area and a specific capacitance of 1200 F/g [2].
Despite the impressive results, there are some challenges that need to be addressed. For example, the volumetric energy density is relatively low in comparison with other types of electrodes, such as activated carbon. The synthetic process of conductive materials and morphologies of CNTs can be difficult to scale up. CNTs on thin metal film electrodes show immense potential for supercapacitor applications, with numerous studies demonstrating improved energy density and rate performance. However, further work is necessary to overcome the limitations and fully harness the potential of this material.

2.3. Hybrid Electrodes with Carbon Nanotube and MXene

Recently, the use of hybrid electrodes composed of CNTs and MXene materials has gained much attention for supercapacitor applications. Both CNTs and MXenes possess significant advantages, including high surface area, good electrical conductivity, and durability, making them ideal components for hybrid electrodes.
Studies have indicated that incorporating CNTs and MXenes into hybrid electrodes can lead to improved supercapacitor performance. For example, Liang, W. et al. fabricated MXene (especially Ti3C2Tx)-MWCNT electrodes and polypyrrole (PPy)-coated MWCNT electrodes as anode and cathode, respectively [4]. Ni foam substrate was immersed in the isopropanol solution containing Ti3C2Tx and MWCNT at various ratios. Ni foam is effective due to its lightweight characteristics, porous structure, and high load mass of active material. PPy-coated MWCNT was prepared by impregnation of Ni foam with PPy-MWCNT composite in ethanol. The asymmetric supercapacitor which comprises of a Ti3C2Tx-MWCNT cathode and PPy-coated MWCNT anode showed a specific capacitance of 0.94 F cm−2 at scan rate of 2 mV s−1. The capacitance is higher than that of pure Ti3C2Tx by optimizing the ratio of MWCNT with increased voltage range. The asymmetric supercapacitor is also electrochemically stable at a voltage window of 0-1.6 V. Another work by Liang et al. reported that a hybrid electrode combining CNTs, Fe3O4, and Ti3C2Tx MXene (Figure 5a–d) exhibited a specific capacitance of 5.52 F/cm2 [5]. Yang et al. utilized a hybrid electrode made from CNTs and Ti3C2 MXene (Figure 5e–j), achieving a specific capacitance of 134 F/g [13].
A way to enhance the performance of hybrid electrodes even further is through the functionalization of CNTs and MXenes. Researchers have tried to modify CNTs with metal nanoparticles and MXenes with conductive materials. For instance, Sharma et al. uses functionalized CNTs and 1T metallic vanadium disulfide (VS2) hybridized with MXene as an electrode for supercapacitor (Figure 6A). The VS2-MX-CNT-50 // MWCNT-based asymmetric supercapacitor showed excellent electrochemical performances in supercapacitor applications, showing a specific capacitance of 505 F/g and an energy density of 7303 Wh/Kg (Figure 6B–G) [42].
Despite these promising findings, challenges persist in the development of hybrid electrodes. One major challenge is maintaining a stable and consistent mixture of CNTs and MXenes, as this can greatly impact the performance of the hybrid electrode. Moreover, scaling up the production of MXenes remains a technical challenge. Hybrid electrodes made from CNTs and MXenes show great promise for supercapacitor applications. Further research is necessary to overcome the challenges in the synthesis and functionalization of these materials to fully unlock their potential in supercapacitor technology.

2.4. Self-Assembled CNTs with NiCoO2 Electrode

Self-assembled CNTs with NiCoO2 electrodes have been the focus of several studies to improve the performance of supercapacitors. The combination of CNTs and NiCoO2 provides a high-performing material system with enhanced energy storage and charge–discharge capability.
In the work by Hu, C., et al., CNT was grown on the Ni foam (NF) by immersing in CNTs solution [3]. Then, it was immersed in a solution that contains precursor of NiCoO2 in deionized water and ethanol. After hydrothermal treatment and calcination under N2 atmosphere at 300 °C, the obtained NiCoO2/CNT@NF acts as an electrode (Figure 7a). The electrode has a certain structure where CNT covered with NiCoO2 nanosheets is intertwined on the surface of NF due to the two-step grown approach of CNTs and NiCoO2. At a current density of 5 mA cm−2, it showed a specific capacitance of 929 F g−1 (3350 mF cm−2), and it is almost 3~8 times higher than that of NiCoO2@NF and CNT@NF. Furthermore, it exhibited longer discharging time, maintaining 90.1% of initial areal capacitance until 5000 cycles. The electrochemical property was enhanced by synergetic effect of CNTs and NiCoO2. This is because the oxygen groups on the surface of CNTs make strong bonds with other materials and the organized nanosheet structure mentioned above. Via a simple dip-coating process, this superior electrochemical performance can be obtained by a 3D network structure. Wang et al. also reported that the self-assembled CNTs with NiCoO2 electrodes exhibited high specific capacitance and excellent cycle stability [9]. They found that the specific capacitance of the CNTs/NiCoO2 system (Figure 7b–e) was as high as 1587 F/g, with good cycling performance sustaining 92% performance even after 5000 cycles. The results of this study indicate that the self-assembled CNTs/NiCoO2 system is a promising candidate for high-performance supercapacitors. Zhou et al. also explored the potential of self-assembled CNTs/NiCoO2 system for supercapacitors [15]. The study modified CNTs’ surface with metal oxides such as NiCoO2 (Figure 7f), which showed a high specific capacitance of 1360 F/g, and an excellent rate capability, showing only a 1.4% loss of capacitance after 3000 cycles. The authors concluded that the CNTs/NiCoO2 system had a great potential for use as high-performance supercapacitor electrodes.
However, the practical implementation of the self-assembled CNTs/NiCoO2 system is still facing several challenges. One major challenge is the consistency and stability of the CNTs self-assembling process, as this greatly impacts the performance of the supercapacitor. Additionally, the cost-effective and large-scale production of the CNTs/NiCoO2 system remains a technical challenge for commercialization. Self-assembled CNTs with NiCoO2 electrodes have shown great potential as high-performance supercapacitor electrodes. Despite the challenges, the results of the studies indicate that the self-assembled CNTs/NiCoO2 system is a promising candidate for future energy storage systems. Further research is needed to address the challenges and optimize the electrochemical performance of self-assembled CNTs/NiCoO2 supercapacitors.

2.5. One-Dimensional Fiber-Based Supercapacitor

A 1D fiber-based supercapacitor is beneficial in terms of volumetric electrochemical performance. It is important for wearable devices that there is no useless area for high volumetric capacitance. Thus, Ma et al. fabricated partially unzipped carbon nanotube (PUCNT)/reduction graphene oxide (rGO) fiber (Figure 8A–G) [43]. They oxidized CNT with KMnO4, and the oxidized CNT (PUOCNT) was well dispersed in solution with grafted hydrophilic groups. The solution containing PUOCNT and GO grew on the fiber by wet-spinning, and finally the PUCNT/rGO fiber was fabricated by chemical reduction. It exhibited larger CV curves at a scan rate of 10 mV s−1 and longer discharging time at a current density of 100 mA cm−3, which means improved electrochemical performance. The volumetric capacitance of the PUCNT/rGO fiber supercapacitor is 62.1 F cm−3 and the capacitance remains over 90% for 20,000 cycles. It is a result of preventing the rGO sheet from being stacked by intercalation of CNT fibers, minimizing the dead volume because the stacking of the graphene layers during fabrication of graphene-based electrodes decreases the surface area ion diffusion rate, which causes performance degeneration. A similar approach using intercalation of CNT between the rGO layers is studied by Heo et al. (Figure 8H–Q) [44]. They made a yarn-type supercapacitor by using SWNTs-coated traditional Korean paper, which obtained a high specific capacitance of 366 F/g and energy density of 114 Wh/Kg as well as excellent cyclic stability, showing no degradation of capacitance after 10,000 cycles due to the same complementary effect.

3. Conclusions and Perspective

The summary of the various types of CNTs and their electrochemical performance are given in Table 1.
CNT-based materials have emerged as promising materials for supercapacitor electrodes due to their high surface area, electrical conductivity, and mechanical strength. CNT-based materials can improve structural property which leads to enhanced electrochemical performance in the forms of 1D fiber, 2D film, and 3D composite. The larger surface area by porous structure of CNTs results in high areal capacitance, and intercalation of CNTs makes volumetric capacitance higher while their low density increases specific capacitance. Furthermore, there are huge potentials when combining with other materials expected to have synergetic effects because this creates various possibilities to combine with other active materials, sometimes with pre-treatment. Therefore, the scope of research regarding the use of CNTs as a supercapacitor material is expected to grow faster and broader in the future, while demands for flexible and wearable energy devices increase.
There have been numerous studies aimed at improving the value of the specific capacitance, energy density, and rate performance of supercapacitors utilizing these materials. One strategy for enhancing performance has involved functionalizing the CNTs with conductive materials such as graphene and metal nanoparticles, while another method has involved controlling the morphology of the CNTs on thin metal films. CNT-FFs have shown impressive energy storage performance in many studies, including a specific capacitance of up to 402 F/g and an energy density of up to 28 Wh/kg. Similarly, CNTs on thin metal film electrodes have also demonstrated high specific capacitance and improved rate performance. Hybrid electrodes combining CNTs with Mxene or NiCoO2 also showed excellent electrochemical performance. However, there are some challenges that need to be addressed, including the scalability of the synthesis processes and the long-term stability of the electrodes. In conclusion, CNT-based electrodes have the potential to be used as electrodes in high-performance supercapacitor devices. However, more research is needed to address the limitations and fully realize their potential for practical applications. In addition, the thickness of working electrodes is very important for supercapacitor applications. Therefore, more studies addressing the effect of thickness on the detailed electrochemical performance of supercapacitors are required. The production yield of CNTs can also be a critical factor for their use in supercapacitor electrodes. Several factors such as the synthetic method or the purity of the raw materials determine the production yield of CNTs. To improve the production yield of CNTs, alternative carbon sources such as biomass have been studied because they are more sustainable and cost-effective raw materials for CNT synthesis. However, further research will be required regarding the industrial use of CNTs in supercapacitor applications.

Author Contributions

Y.H., H.H., C.C., H.Y., P.M., J.Y.C. and B.H. prepared the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

This research was supported by the Chung-Ang University Research Grants in 2022. This work was supported by funding from Bavarian Center for Battery Technology (Baybatt) and Bayerisch-Tschechische Hochschulagentur (BTHA) (BTHA-AP-2023-5).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The datasets used and/or analyzed during the current study are available from the corresponding author upon reasonable request.

Acknowledgments

IRB permission is not applicable because there were no human or animal related experiments in this study.

Conflicts of Interest

The authors declare that they have no competing interest.

References

  1. Arshad, N.; Usman, M.; Adnan, M.; Ahsan, M.T.; Rehman, M.R.; Javed, S.; Ali, Z.; Akram, M.A.; Demopoulos, G.P.; Mahmood, A. Nanoengineering of NiO/MnO2/GO Ternary Composite for Use in High-Energy Storage Asymmetric Supercapacitor and Oxygen Evolution Reaction (OER). Nanomaterials 2023, 13, 99. [Google Scholar] [CrossRef] [PubMed]
  2. Cheng, H.; Koh, K.L.P.; Liu, P.; Thang, T.Q.; Duong, H.M. Continuous self-assembly of carbon nanotube thin films and their composites for supercapacitors. Colloids Surf. A Physicochem. Eng. Asp. 2015, 481, 626–632. [Google Scholar] [CrossRef]
  3. Hu, C.; Miao, L.; Yang, Q.; Yu, X.; Song, L.; Zheng, Y.; Wang, C.; Li, L.; Zhu, L.; Cao, X.; et al. Self-assembly of CNTs on Ni foam for enhanced performance of NiCoO2@CNT@NF supercapacitor electrode. Chem. Eng. J. 2021, 410, 128317. [Google Scholar] [CrossRef]
  4. Liang, W.; Zhitomirsky, I. MXene–carbon nanotube composite electrodes for high active mass asymmetric supercapacitors. J. Mater. Chem. A 2021, 9, 10335–10344. [Google Scholar] [CrossRef]
  5. Liang, W.; Zhitomirsky, I. Composite Fe3O4-MXene-Carbon Nanotube Electrodes for Supercapacitors Prepared Using the New Colloidal Method. Materials 2021, 14, 2930. [Google Scholar] [CrossRef]
  6. He, J.-H.; Elazem, N.Y. The Carbon Nanotube-Embedded Boundary Layer Theory for Energy Harvesting. Facta Univ. Ser. Mech. Eng. 2022, 20, 221–235. [Google Scholar] [CrossRef]
  7. Chen, D.; Jiang, K.; Huang, T.; Shen, G. Recent advances in fiber supercapacitors: Materials, device configurations, and applications. Adv. Mater. 2020, 32, 1901806. [Google Scholar] [CrossRef] [PubMed]
  8. Kim, H.; Qaiser, N.; Hwang, B. Electro-Mechanical Response of Stretchable PDMS Composites with a Hybrid Filler System. Facta Univ. Ser. Mech. Eng. 2023, 2766459-4. [Google Scholar] [CrossRef]
  9. Wang, B.Q.; Gong, S.H.; Sun, Q.S.; Liu, F.; Wang, X.C.; Cheng, J.P. Carbon nanotubes refined mesoporous NiCoO2 nanoparticles for high−performance supercapacitors. Electrochim. Acta 2022, 402, 139575. [Google Scholar] [CrossRef]
  10. Wang, C.; Hu, K.; Liu, Y.; Zhang, M.-R.; Wang, Z.; Li, Z. Flexible Supercapacitors Based on Graphene/Boron Nitride Nanosheets Electrodes and PVA/PEI Gel Electrolytes. Materials 2021, 14, 1955. [Google Scholar] [CrossRef]
  11. Wang, Q.; Liu, J.; Tian, G.; Zhang, D. Co@N-CNT/MXenes in situ grown on carbon nanotube film for multifunctional sensors and flexible supercapacitors. Nanoscale 2021, 13, 14460–14468. [Google Scholar] [CrossRef]
  12. Yang, J.; Mao, Z.; Zheng, R.; Liu, H.; Shi, L. Solution-Blown Aligned Nanofiber Yarn and Its Application in Yarn-Shaped Supercapacitor. Materials 2020, 13, 3778. [Google Scholar] [CrossRef]
  13. Yang, L.; Zheng, W.; Zhang, P.; Chen, J.; Tian, W.B.; Zhang, Y.M.; Sun, Z.M. MXene/CNTs films prepared by electrophoretic deposition for supercapacitor electrodes. J. Electroanal. Chem. 2018, 830–831, 1–6. [Google Scholar] [CrossRef]
  14. Zhang, L.; Zhang, X.; Wang, J.; Seveno, D.; Fransaer, J.; Locquet, J.-P.; Seo, J.W. Carbon Nanotube Fibers Decorated with MnO2 for Wire-Shaped Supercapacitor. Molecules 2021, 26, 3479. [Google Scholar] [CrossRef]
  15. Zhou, H.; Zhang, L.; Zhang, D.; Chen, S.; Coxon, P.R.; He, X.; Coto, M.; Kim, H.-K.; Xi, K.; Ding, S. A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors. Sci. Rep. 2016, 6, 37752. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  16. Kanoun, O.; Bouhamed, A.; Ramalingame, R.; Bautista-Quijano, J.R.; Rajendran, D.; Al-Hamry, A. Review on conductive polymer/CNTs nanocomposites based flexible and stretchable strain and pressure sensors. Sensors 2021, 21, 341. [Google Scholar] [CrossRef]
  17. Gnanasekaran, K.; Heijmans, T.; Van Bennekom, S.; Woldhuis, H.; Wijnia, S.; De With, G.; Friedrich, H. 3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling. Appl. Mater. Today 2017, 9, 21–28. [Google Scholar] [CrossRef]
  18. Jing, D.; Hatami, M. Peristaltic Carreau-Yasuda nanofluid flow and mixed heat transfer analysis in an asymmetric vertical and tapered wavy wall channel. Rep. Mech. Eng. 2020, 1, 128–140. [Google Scholar]
  19. Gregg, A.; De Volder, M.F.; Baumberg, J.J. Light—Actuated Anisotropic Microactuators from CNT/Hydrogel Nanocomposites. Adv. Opt. Mater. 2022, 10, 2200180. [Google Scholar] [CrossRef]
  20. Du, M.; Xia, W.; Jiao, Z.; Chen, Y.; Demir, M.; Zhang, Y.; Gu, M.; Zhang, X.; Wang, C. Construction of hierarchical sugar gourd-like (Ni,Co)Se2/(Ni,Co)Se2/CC nanostructure with enhanced performance for hybrid supercapacitor. J. Alloy. Compd. 2023, 930, 167459. [Google Scholar] [CrossRef]
  21. Jiao, Z.; Chen, Y.; Demir, M.; Du, M.; Gu, M.; Wang, C.; Zhang, X.; Deng, Y.; Wang, Z.; Wang, T.; et al. Vanadium-doped Co0.85Se nanowire arrays with high areal capacitance for hybrid supercapacitor electrodes. J. Energy Storage 2022, 52, 104929. [Google Scholar] [CrossRef]
  22. Jiao, Z.; Chen, Y.; Du, M.; Demir, M.; Yan, F.; Xia, W.; Zhang, Y.; Wang, C.; Gu, M.; Zhang, X.; et al. 3D hollow NiCo LDH nanocages anchored on 3D CoO sea urchin-like microspheres: A novel 3D/3D structure for hybrid supercapacitor electrodes. J. Colloid Interface Sci. 2023, 633, 723–736. [Google Scholar] [CrossRef] [PubMed]
  23. Zhang, Y.; Mei, H.-X.; Cao, Y.; Yan, X.-H.; Yan, J.; Gao, H.-L.; Luo, H.-W.; Wang, S.-W.; Jia, X.-D.; Kachalova, L.; et al. Recent advances and challenges of electrode materials for flexible supercapacitors. Coord. Chem. Rev. 2021, 438, 213910. [Google Scholar] [CrossRef]
  24. Chen, H.; Zeng, S.; Chen, M.; Zhang, Y.; Li, Q. Fabrication and functionalization of carbon nanotube films for high-performance flexible supercapacitors. Carbon 2015, 92, 271–296. [Google Scholar] [CrossRef]
  25. Hillier, N.; Yong, S.; Beeby, S. The good, the bad and the porous: A review of carbonaceous materials for flexible supercapacitor applications. Energy Rep. 2020, 6, 148–156. [Google Scholar] [CrossRef]
  26. Mikhalchan, A.; Vilatela, J.J. A perspective on high-performance CNT fibres for structural composites. Carbon 2019, 150, 191–215. [Google Scholar] [CrossRef]
  27. Han, L.; Song, Q.; Sun, J.; Li, K.; Lu, Y. The role of CNT in improving the mechanical strength retention rate of C/C composites during heat treatment. Compos. Part B Eng. 2020, 187, 107856. [Google Scholar] [CrossRef]
  28. Sun, Y.; Sun, J.; Liu, M.; Chen, Q. Mechanical strength of carbon nanotube–nickel nanocomposites. Nanotechnology 2007, 18, 505704. [Google Scholar] [CrossRef]
  29. Kim, G.; Nam, I.; Yang, B.; Yoon, H.; Lee, H.-K.; Park, S. Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: The state of the art. Compos. Struct. 2019, 227, 111244. [Google Scholar] [CrossRef]
  30. Wang, B.; Xin, H.; Li, X.; Cheng, J.; Yang, G.; Nie, F. Mesoporous CNT@ TiO2-C nanocable with extremely durable high rate capability for lithium-ion battery anodes. Sci. Rep. 2014, 4, 3729. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  31. Sadiq, M.; Khan, M.A.; Hasan Raza, M.M.; Aalam, S.M.; Zulfequar, M.; Ali, J. Enhancement of Electrochemical Stability Window and Electrical Properties of CNT-Based PVA–PEG Polymer Blend Composites. ACS Omega 2022, 7, 40116–40131. [Google Scholar] [CrossRef]
  32. Iijima, S. Helical microtubules of graphitic carbon. Nature 1991, 354, 56–58. [Google Scholar] [CrossRef]
  33. Lu, X.; Chen, Z. Curved pi-conjugation, aromaticity, and the related chemistry of small fullerenes (<C60) and single-walled carbon nanotubes. Chem. Rev. 2005, 105, 3643–3696. [Google Scholar]
  34. Al-Buriahi, M.S.; Hessien, M.; Alresheedi, F.; Al-Baradi, A.M.; Alrowaili, Z.A.; Kebaili, I.; Olarinoye, I.O. ZnO– Bi2O3 nanopowders: Fabrication, structural, optical, and radiation shielding properties. Ceram. Int. 2022, 48, 3464–3472. [Google Scholar] [CrossRef]
  35. Alrowaili, Z.A.; Ali, A.M.; Al-Baradi, A.M.; Al-Buriahi, M.S.; Wahab, E.A.A.; Shaaban, K.S. A significant role of MoO3 on the optical, thermal, and radiation shielding characteristics of B2O3–P2O5–Li2O glasses. Opt. Quantum Electron. 2022, 54, 88. [Google Scholar] [CrossRef]
  36. Alrowaili, Z.A.; Taha, T.A.; Ibrahim, M.; Saron, K.M.A.; Sriwunkum, C.; Al-Baradi, A.M.; Al-Buriahi, M.S. Synthesis and characterization of B2O3-Ag3PO4-ZnO-Na2O glasses for optical and radiation shielding applications. Optik 2021, 248, 168199. [Google Scholar] [CrossRef]
  37. Onyibo, E.C.; Safaei, B. Application of finite element analysis to honeycomb sandwich structures: A review. Rep. Mech. Eng. 2022, 3, 192–209. [Google Scholar] [CrossRef]
  38. Hwang, B.; Han, Y.; Matteini, P. Bending Fatigue Behavior of Ag Nanowire/Cu Thin-Film Hybrid Interconnects for Wearable Electronics. Facta Univ. Ser. Mech. Eng. 2022, 20, 553–560. [Google Scholar] [CrossRef]
  39. Liang, Y.; Luo, X.; Weng, W.; Hu, Z.; Zhang, Y.; Xu, W.; Bi, Z.; Zhu, M. Activated Carbon Nanotube Fiber Fabric as a High-Performance Flexible Electrode for Solid-State Supercapacitors. ACS Appl. Mater. Interfaces 2021, 13, 28433–28441. [Google Scholar] [CrossRef] [PubMed]
  40. Shen, H.; Li, H.; Li, M.; Li, C.; Qian, L.; Su, L.; Yang, B. High-performance aqueous symmetric supercapacitor based on polyaniline/vertical graphene/Ti multilayer electrodes. Electrochim. Acta 2018, 283, 410–418. [Google Scholar] [CrossRef]
  41. Shahrokhian, S.; Naderi, L.; Mohammadi, R. High-Performance Fiber-Shaped Flexible Asymmetric Microsupercapacitor Based on Ni(OH)2 Nanoparticles-Decorated Porous Dendritic Ni–Cu Film/Cu Wire and Reduced Graphene Oxide/Carbon Fiber Electrodes. ACS Sustain. Chem. Eng. 2018, 6, 14574–14588. [Google Scholar] [CrossRef]
  42. Sharma, A.; Rout, C.S. 1T metallic vanadium disulfide hybridized with MXene and functionalized-MWCNT as a remarkable electrode for high power density asymmetric supercapacitor applications. Int. J. Energy Res. 2022, 46, 24537–24553. [Google Scholar] [CrossRef]
  43. Ma, W.; Li, W.; Li, M.; Mao, Q.; Pan, Z.; Hu, J.; Li, X.; Zhu, M.; Zhang, Y. Unzipped Carbon Nanotube/Graphene Hybrid Fiber with Less “Dead Volume” for Ultrahigh Volumetric Energy Density Supercapacitors. Adv. Funct. Mater. 2021, 31, 2100195. [Google Scholar] [CrossRef]
  44. Heo, Y.-J.; Lee, J.W.; Son, Y.-R.; Lee, J.-H.; Yeo, C.S.; Lam, T.D.; Park, S.Y.; Park, S.-J.; Sinh, L.H.; Shin, M.K. Large-Scale Conductive Yarns Based on Twistable Korean Traditional Paper (Hanji) for Supercapacitor Applications: Toward High-Performance Paper Supercapacitors. Adv. Energy Mater. 2018, 8, 1801854. [Google Scholar] [CrossRef]
Applsci 13 03290 g001 550
Figure 1. Main issues in flexible supercapacitors (SCs). Reproduced with permission from ref. [23]. Copyright 2015 Elsevier.
Figure 1. Main issues in flexible supercapacitors (SCs). Reproduced with permission from ref. [23]. Copyright 2015 Elsevier.
Applsci 13 03290 g001
Applsci 13 03290 g002 550
Figure 2. (a) Process diagram of the supercapacitor based on CNT-FF. Reproduced from ref. [12] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (b) Schematic diagram of the manufacturing method of the CNT–MnO2 supercapacitors. Reproduced from ref. [14] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License).
Figure 2. (a) Process diagram of the supercapacitor based on CNT-FF. Reproduced from ref. [12] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (b) Schematic diagram of the manufacturing method of the CNT–MnO2 supercapacitors. Reproduced from ref. [14] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License).
Applsci 13 03290 g002
Applsci 13 03290 g003 550
Figure 3. A schematic showing the fabrication process and structure of the wearable supercapacitor (WSC). (a) The carbon cloth was used as a current collector. (b) The CNTs were loaded on the carbon cloth through filtration, where sodium dodecylbenzene sulfonate (SDBS) was used as a dispersant. (c) The graphene was mounted on the CNTs layer through filtration, where boron nitride nanosheets (BNNS) were used to prevent graphene from collapsing. (d) The as-fabricated WSC was assembled with hydrogel used as a solid electrolyte. (e) The schematic structure of the WSC. (f) The WSCs could be integrated into clothing to power wearable devices. Reproduced from ref. [10] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (g) Schematic illustration for the formation of composites. Reproduced from ref. [1] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License.
Figure 3. A schematic showing the fabrication process and structure of the wearable supercapacitor (WSC). (a) The carbon cloth was used as a current collector. (b) The CNTs were loaded on the carbon cloth through filtration, where sodium dodecylbenzene sulfonate (SDBS) was used as a dispersant. (c) The graphene was mounted on the CNTs layer through filtration, where boron nitride nanosheets (BNNS) were used to prevent graphene from collapsing. (d) The as-fabricated WSC was assembled with hydrogel used as a solid electrolyte. (e) The schematic structure of the WSC. (f) The WSCs could be integrated into clothing to power wearable devices. Reproduced from ref. [10] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (g) Schematic illustration for the formation of composites. Reproduced from ref. [1] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License.
Applsci 13 03290 g003
Applsci 13 03290 g004 550
Figure 4. (a) Schematics of the synthesis procedure for the PANI/Gr/Ti wire electrode and symmetrical supercapacitor. Reproduced with permission from ref. [40]. Copyright 2018 Elsevier. (b) Schematic illustration of the preparation of Ni(OH)2/Ni–Cu/CW. (c) Typical digital images of the Cu-wire, Ni–Cu/CW and Ni(OH)2/Ni–Cu/CW. Reproduced with permission from ref. [41]. Copyright 2018 American Chemical Society. (d) Schematic illustration of the continuous fabrication of CNT films and the synthesis of the Ni(OH)2/CNTs composite and (e) digital photo of the obtained CNT films with length ~1.5 m. Reproduced with permission from ref. [2]. Copyright 2015 Elsevier.
Figure 4. (a) Schematics of the synthesis procedure for the PANI/Gr/Ti wire electrode and symmetrical supercapacitor. Reproduced with permission from ref. [40]. Copyright 2018 Elsevier. (b) Schematic illustration of the preparation of Ni(OH)2/Ni–Cu/CW. (c) Typical digital images of the Cu-wire, Ni–Cu/CW and Ni(OH)2/Ni–Cu/CW. Reproduced with permission from ref. [41]. Copyright 2018 American Chemical Society. (d) Schematic illustration of the continuous fabrication of CNT films and the synthesis of the Ni(OH)2/CNTs composite and (e) digital photo of the obtained CNT films with length ~1.5 m. Reproduced with permission from ref. [2]. Copyright 2015 Elsevier.
Applsci 13 03290 g004
Applsci 13 03290 g005 550
Figure 5. (a–d) SEM images at different magnifications of (a,b) as-received Ti3C2Tx and (c,d) Ti3C2TX-Fe3O4-CNT. Reproduced from ref. [5] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (e–j) The top view SEM images of (e) Ti3C2, (f) CNTs, and (g) Ti3C2/CNTs film. Cross section SEM images of (h) Ti3C2, (i) CNTs, and (j) Ti3C2/CNTs film deposited on the graphite paper. Reproduced with permission from ref. [13]. Copyright 2018 Elsevier.
Figure 5. (a–d) SEM images at different magnifications of (a,b) as-received Ti3C2Tx and (c,d) Ti3C2TX-Fe3O4-CNT. Reproduced from ref. [5] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License). (e–j) The top view SEM images of (e) Ti3C2, (f) CNTs, and (g) Ti3C2/CNTs film. Cross section SEM images of (h) Ti3C2, (i) CNTs, and (j) Ti3C2/CNTs film deposited on the graphite paper. Reproduced with permission from ref. [13]. Copyright 2018 Elsevier.
Applsci 13 03290 g005
Applsci 13 03290 g006 550
Figure 6. (A) General scheme of hydrothermal synthesis procedure employed to prepare VS2, VS2-MX, and VS2-MX-CNT. (B) Comparison plot showing the specific capacitance of VS2-MX, VS2-MX-CNT-30, VS2-MX-CNT-50, and VS2-MX-CNT-70 samples at a current density from 0.2 A/g to 1 A/g. (C) Nyquist plot showing the EIS fit graphs in the circuit (see Inset). (D) Contribution of capacitive and diffusion-controlled areas of VS2-MX-CNT-50 at a scan rate of 20 mV/s. (E) Contribution of capacitive and diffusion-controlled reactions at scan rates ranging from 10 to 100 mV/s for VS2-MX-CNT-50 ternary hybrid electrode. (F) Comparison of MXene and VS2-MX-CNT-50 CV profiles at a scan rate of 80 mV/s to estimate the potential window. (G) The stability of potential window of VS2-MX-CNT-50 // MWCNT asymmetric devices from 1.6 to 1.8 V at 100 mV/s, as shown by CV curves. Reproduced with permission from ref. [42]. Copyright 2022 Wiley.
Figure 6. (A) General scheme of hydrothermal synthesis procedure employed to prepare VS2, VS2-MX, and VS2-MX-CNT. (B) Comparison plot showing the specific capacitance of VS2-MX, VS2-MX-CNT-30, VS2-MX-CNT-50, and VS2-MX-CNT-70 samples at a current density from 0.2 A/g to 1 A/g. (C) Nyquist plot showing the EIS fit graphs in the circuit (see Inset). (D) Contribution of capacitive and diffusion-controlled areas of VS2-MX-CNT-50 at a scan rate of 20 mV/s. (E) Contribution of capacitive and diffusion-controlled reactions at scan rates ranging from 10 to 100 mV/s for VS2-MX-CNT-50 ternary hybrid electrode. (F) Comparison of MXene and VS2-MX-CNT-50 CV profiles at a scan rate of 80 mV/s to estimate the potential window. (G) The stability of potential window of VS2-MX-CNT-50 // MWCNT asymmetric devices from 1.6 to 1.8 V at 100 mV/s, as shown by CV curves. Reproduced with permission from ref. [42]. Copyright 2022 Wiley.
Applsci 13 03290 g006
Applsci 13 03290 g007 550
Figure 7. (a) Schematic illustration of the fabrication process of the NiCoO2@CNTs@NF integrated electrode. Reproduced with permission from ref. [3]. Copyright 2021 Elsevier. (b–e) SEM images of (a) pure CNT, (b) pure NiCoO2, and (c,d) NiCoO2@CNT. Reproduced with permission from ref. [9]. Copyright 2022 Elsevier. (f) Schematic illustration of the synthetic procedure for TMO@CNT hybrid materials through pre-coating CNT with sulfonated polystyrene. Reproduced from ref. [15] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License.
Figure 7. (a) Schematic illustration of the fabrication process of the NiCoO2@CNTs@NF integrated electrode. Reproduced with permission from ref. [3]. Copyright 2021 Elsevier. (b–e) SEM images of (a) pure CNT, (b) pure NiCoO2, and (c,d) NiCoO2@CNT. Reproduced with permission from ref. [9]. Copyright 2022 Elsevier. (f) Schematic illustration of the synthetic procedure for TMO@CNT hybrid materials through pre-coating CNT with sulfonated polystyrene. Reproduced from ref. [15] under the Creative Commons Attribution 4.0 International (CC BY 4.0) License.
Applsci 13 03290 g007
Applsci 13 03290 g008 550
Figure 8. (A) Schematic illustration of PUOCNT synthesis and of PUCNT/RGO fiber fabrication. (B,C) TEM images of PUOCNT. (D) Raman spectra, (E) XPS survey spectrum, (F) XPS C1s spectrum, and (G) nitrogen adsorption and desorption isotherms of CNT and PUOCNT. Morphologies and textural properties of conductive KTP sheets depending on coating carbon solutions. Reproduced with permission from ref. [43]. Copyright 2021 Wiley. SEM images of (H,L) neat KTP, (I,M) rGO on KTP, (J,N) SWNT on KTP, and (K,O) rGO/SWNT on KTP with different magnifications. (P) Porosity and mean pore diameter changes as function of carbon materials. (Q) Schematic illustration showing the structures of conductive KTP sheets as function of carbon materials. Reproduced with permission from ref. [44]. Copyright 2018 Wiley.
Figure 8. (A) Schematic illustration of PUOCNT synthesis and of PUCNT/RGO fiber fabrication. (B,C) TEM images of PUOCNT. (D) Raman spectra, (E) XPS survey spectrum, (F) XPS C1s spectrum, and (G) nitrogen adsorption and desorption isotherms of CNT and PUOCNT. Morphologies and textural properties of conductive KTP sheets depending on coating carbon solutions. Reproduced with permission from ref. [43]. Copyright 2021 Wiley. SEM images of (H,L) neat KTP, (I,M) rGO on KTP, (J,N) SWNT on KTP, and (K,O) rGO/SWNT on KTP with different magnifications. (P) Porosity and mean pore diameter changes as function of carbon materials. (Q) Schematic illustration showing the structures of conductive KTP sheets as function of carbon materials. Reproduced with permission from ref. [44]. Copyright 2018 Wiley.
Applsci 13 03290 g008
Table
Table 1. A summary of the various types of CNTs and their electrochemical performances.
Table 1. A summary of the various types of CNTs and their electrochemical performances.
MaterialsElectrochemical Performance[Ref]
CNTFFAreal capacitance of up to 353 mF/cm2 and an energy density of up to 247 μW/cm2[39]
CNT-MnO2 fiber fabricsA specific capacitance reaching up to 231.3 F/g and an energy density of up to 86 nWh/cm[14]
CNT-graphene fiber fabricsA specific capacitance of up to 350 mF/cm2[10]
CNT-NiO fiber fabricsA specific capacitance of up to 402 F/g and an energy density of up to 28 Wh/kg[1]
Functionalizing CNTs on a Ti thin film with grapheneA specific capacitance of 535.7 F/g and an energy density up to 26.1 Wh/Kg[40]
CNTs on Ni thin filmsA specific capacitance of 1200 F/g[2]
MXene (Ti3C2Tx)-MWCNT electrodesA specific capacitance of 0.94 F cm−2 at scan rate of 2 mV s−1[4]
A hybrid electrode combining CNTs, Fe3O4, and Ti3C2Tx MXeneA specific capacitance of 5.52 F/cm2[5]
CNTs and Ti3C2 MXeneA specific capacitance of 134 F/g[13]
VS2-MX-CNT-50//MWCNTA specific capacitance of 505 F/g and an energy density of 7303 Wh/Kg[42]
NiCoO2/CNT@NFA specific capacitance of 929 F g−1[3]
CNTs/NiCoO2 system (3D)A specific capacitance of 1587 F/g[9]
Self-assembled CNTs/NiCoO2 systemA high specific capacitance of 1360 F/g[15]
SWNTs-coated Korean traditional paperA specific capacitance of 366 F/g and energy density of 114 Wh/Kg[44]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Han, Y.; Ha, H.; Choi, C.; Yoon, H.; Matteini, P.; Cheong, J.Y.; Hwang, B. Review of Flexible Supercapacitors Using Carbon Nanotube-Based Electrodes. Appl. Sci. 2023, 13, 3290. https://doi.org/10.3390/app13053290

AMA Style

Han Y, Ha H, Choi C, Yoon H, Matteini P, Cheong JY, Hwang B. Review of Flexible Supercapacitors Using Carbon Nanotube-Based Electrodes. Applied Sciences. 2023; 13(5):3290. https://doi.org/10.3390/app13053290

Chicago/Turabian Style

Han, Yurim, Heebo Ha, Chunghyeon Choi, Hyungsub Yoon, Paolo Matteini, Jun Young Cheong, and Byungil Hwang. 2023. "Review of Flexible Supercapacitors Using Carbon Nanotube-Based Electrodes" Applied Sciences 13, no. 5: 3290. https://doi.org/10.3390/app13053290

APA Style

Han, Y., Ha, H., Choi, C., Yoon, H., Matteini, P., Cheong, J. Y., & Hwang, B. (2023). Review of Flexible Supercapacitors Using Carbon Nanotube-Based Electrodes. Applied Sciences, 13(5), 3290. https://doi.org/10.3390/app13053290

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop