Next Article in Journal
Soil Dynamic Constitutive Model for Characterizing the Nonlinear-Hysteretic Response
Next Article in Special Issue
Emergence of White Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence
Previous Article in Journal
Low Reynolds Number Flow Around Tori of Different Slenderness Γ
Previous Article in Special Issue
New Class of Wide Energy Gap Benzotriimidazole Optical Materials
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 7
Issue 11
10.3390/app7111109
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis and Electroluminescence Properties of 3-(Trifluoromethyl)phenyl-Substituted 9,10-Diarylanthracene Derivatives for Blue Organic Light-Emitting Diodes

by
Sang Woo Kwak
1,†,
Kang Mun Lee
2,†,
Ji-Eun Lee
1,
Jisu Yoo
3,
Yeonjin Yi
3,
Hyoshik Kwon
4,
Hyunbok Lee
5,*,
Myung Hwan Park
4,* and
Yongseog Chung
1,*
1
Department of Chemistry, Chungbuk National University, Cheongju 28644, Korea
2
Department of Chemistry, Institute for Molecular Science and Fusion Technology, Kangwon National University, Chuncheon 24341, Korea
3
Institute of Physics and Applied Physics, Yonsei University, Seoul 03722, Korea
4
Department of Chemistry Education, Chungbuk National University, Cheongju 28644, Korea
5
Department of Physics, Kangwon National University, Chuncheon 24341, Korea
*
Authors to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Appl. Sci. 2017, 7(11), 1109; https://doi.org/10.3390/app7111109
Submission received: 28 September 2017 / Revised: 12 October 2017 / Accepted: 23 October 2017 / Published: 26 October 2017
(This article belongs to the Special Issue Fluorescence and Phosphorescence in Organic Materials: from Fundamental to OLED Devices)
Browse Figures
Versions Notes

Abstract

:
Diaryl-substituted anthracene derivatives containing 3-(trifluoromethyl)phenyl) groups, 9,10-diphenyl-2-(3-(trifluoromethyl)phenyl)anthracene (1), 9,10-di([1,1′-biphenyl]-4-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (2), and 9,10-di(naphthalen-2-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (3) were synthesized and characterized. The compounds 1–3 possessed high thermal stability and proper frontier-energy levels, which make them suitable as host materials for blue organic light-emitting diodes. The electroluminescent (EL) emission maximum of the three N,N-diphenylamino phenyl vinyl biphenyl (DPAVBi)-doped (8 wt %) devices for compounds 1–3 was exhibited at 488 nm (for 1) and 512 nm (for 2 and 3). Among them, the 1-based device displayed the highest device performances in terms of brightness (Lmax = 2153.5 cd·m−2), current efficiency (2.1 cd·A−1), and external quantum efficiency (0.8%), compared to the 2- and 3-based devices.

1. Introduction

Since the first report of Tang and VanSlyke in 1987 [1], organic electroluminescent (EL) devices have been receiving much scientific and commercial attention because of their latent capabilities, such as full-color displays, excellent brightness, fast response time, low turn-on voltage, wide viewing angle, and flexible light source [2]. Extremely pure red, green, and blue luminophores with high electrochemical stability and efficiency are particularly essential for a vivid full-color display in organic light-emitting diodes (OLEDs). To date, OLED materials for red and green emission with high performance have been developed [3,4,5,6,7,8,9,10,11]. However, continuous efforts to enhance stability and efficiency in blue fluorescent materials, which possess relatively low chemical and electrochemical properties, caused by the intrinsic wide band-gap, are still required [12,13].
As a notable candidate for effective blue-emitting materials, anthracene derivatives have attracted much attention in OLEDs because of their excellent optical and electroluminescent properties [14,15,16,17,18,19,20,21,22,23,24,25,26,27,28]. However, these organic fluorescent π-conjugated compounds pose small problems, such as poor thermal stability and device failure caused by intermolecular π-stacking features. Novel silicon-cored (triphenylsilane) [29,30] or asymmetric anthracene derivatives [31,32,33] containing bulky aryl substituents at the 9,10-position that exhibit high thermal stability and good EL properties as blue host materials have recently been investigated. Furthermore, 9,10-diarylanthracene (DAA) compounds containing aryl groups such as spirobifluorene [34] and carbazole [35,36] moieties are advantageous in terms of preventing close packing of the molecular structure, thereby achieving high quantum efficiency and EL properties. Along with the foregoing studies, DAA derivatives bearing various substituents at the C-2 position of anthracene moieties have also been recently investigated [37,38].
In an effort to extend such concepts, we were interested in the DAA compounds with trifluoromethyl units at the C-2 position of the anthracene core. The trifluoromethyl group, in particular, can give rise to enhancing electron mobility, thereby improving the balance of charge injection and transfer [39]. In addition, the introduction of a bulky 3-(trifluoromethyl)phenyl) unit into the anthracene core can efficiently prevent the intermolecular aggregations and reduce self-quenching behaviors. Although several fluorinated DAA derivatives at the 9,10-position of the anthracene groups as noticeable blue host materials have been reported [40,41], the example of 2-fluorinated DAA compounds has never been studied.
From this perspective, we have systematically designed and synthesized a series of DAA derivatives (i.e., 9,10-diphenyl-2-(3-(trifluoromethyl)phenyl)anthracene (1), 9,10-di([1,1′-biphenyl]-4-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (2), and 9,10-di(naphthalen-2-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (3)) bearing fluorinated end-capping groups at the C-2 position of the anthracene core to investigate their thermal/electrochemical stabilities and electronic performances. The synthesis, characterization, and luminescence properties of the newly prepared DAA compounds (1–3), along with their application as the blue host materials for OLEDs, are presented in detail herein.

2. Materials and Methods

2.1. General Considerations

All chemicals were purchased from Sigma-Aldrich (St. Louis, MO, USA) and were used without any further purification. All solvents, such as toluene, tetrahydrofuran (THF), and ethanol, were dried by distillation from sodium diphenylketyl under dinitrogen and were stored over 5 Å activated molecular sieves [42]. Spectrophotometric-grade dichloromethane (DCM) was used as received. All reactions were carried out under a nitrogen atmosphere. Commercial reagents were used without any further purification after purchasing from Sigma-Aldrich (bromobenzene, 4-bromobiphenyl, 2-bromonaphthalene, n-butyllithium solution (2.5 M in hexane, n-BuLi), potassium iodide (KI), sodium hypophosphite (NaPO2H2), acetic acid, 3-trifluoromethylphenylboronic acid, copper iodide (CuI), tetrakis(triphenylphosphine)palladium (Pd(PPh3)4), potassium carbonate (K2CO3)). The 2-bromo-9,10-arylanthracene precursors (1a–3a) were analogously prepared according to the reported procedures [38,43]. Deuterated solvent (CDCl3) from Cambridge Isotope Laboratories (Tewksbury, MA, USA) was used after drying over activated molecular sieves (5 Å). Nuclear Magnetic Resonance (NMR) spectra were recorded at ambient temperature on Bruker Avance 400 spectrometer (400.13 MHz for 1H, 100.62 MHz for 13C, and 376.5 MHz for 19F) using standard parameters. Chemical shifts are given in ppm, and are referenced against external Me4Si (1H, 13C) and CFCl3 (19F). Elemental analyses were performed on an EA3000 (Eurovector, Pavia, Italy) in the Central Laboratory of Kangwon National University. The thermal properties of compound were investigated by TGA2940 system (TA Instrument, New Castle, DE, USA) and DSC2910 system (TA Instrument, New Castle, DE, USA) under a nitrogen atmosphere at a heating rate of 10 °C/min. UV/Vis absorption and PL spectra were recorded on a Jasco V-530 (Jasco, Easton, MD, USA) and a Spex Fluorog-3 Luminescence spectrophotometer (HORIBA, Edison, NJ, USA), respectively, in CH2Cl2 solvent with a 1-cm quartz cuvette at ambient temperature. Cyclic voltammetry measurements were performed using an AUTOLAB/PGSTAT12 system (Artisan Technology Group, Champaign, IL, USA).

2.2. General Synthesis of 9,10-aryl-2-(3-(trifluoromethyl)phenyl)anthracene (1–3)

The mixture of the relevant 2-bromo-9,10-arylanthracene precursor (1.00 mmol), 3-trifluoromethylphenylboronic acid (0.30 g, 1.58 mmol), Pd(PPh3)4 (0.06 g, 0.05 mmol) and K2CO3 (0.76 g, 5.50 mmol) was added to the solvent of 24 mL (toluene/H2O/ethanol = 2:1:1, v/v/v) at ambient temperature. After stirring for 1 h, the reaction mixture was allowed to slowly heated to 110 °C and stirred for 24 h. The resulting solution was extracted with CH2Cl2 (30 mL × 3). The combined organic portions were dried over MgSO4 and the solvent was removed under reduced pressure. Purification by column chromatography (eluent: ethylacetate/n-hexane = 1:10, v/v) afforded the products (1–3).

2.2.1. Data for 9,10-diphenyl-2-(3-(trifluoromethyl)phenyl)anthracene (1)

Pale yellow solid (0.24 g, 48%). 1H NMR (CDCl3): δ 7.89 (d, J = 1.2 Hz, 1H), 7.80 (d, J = 8.2 Hz, 1H), 7.77 (br s, 1H), 7.72 (d, J = 7.2 Hz, 1H), 7.70 (d, J = 4.8 Hz, 1H), 7.68 (d, J = 7.8 Hz, 1H), 7.61 (m, 4H), 7.56 (m, 4H), 7.51 (m, 5H), 7.34 (q, J = 8.0 Hz, 2H). 13C NMR (CDCl3): δ 141.92, 138.80, 138.66, 137.73, 137.14, 135.85, 131.29, 131.27, 130.96, 130.55, 130.39, 130.22, 129.84, 129.25, 129.13, 128.53, 128.49, 128.08, 127.71, 127.62, 127.03, 127.01, 125.45, 125.33, 125.31, 125.05, 124.48, 124.05, 124.01, 123.92, 123.88, 122.75, 77.20 (CF3). 19F NMR (CDCl3): δ–62.7. Anal. Calcd. for C33H21F3: C, 83.53; H, 4.46. Found: C, 82.99; H, 4.13.

2.2.2. Data for 9,10-di([1,1′-biphenyl]-4-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (2)

Pale yellow solid (0.30 g, 44%). 1H NMR (CDCl3): δ 7.99 (d, J = 1.2 Hz, 1H), 7.91 (d, J = 8.0 Hz, 1H), 7.86 (d, J = 7.6 Hz, 4H), 7.84 (m, 1H), 7.80 (m, 4H), 7.78 (d, J = 1.2 Hz, 2H), 7.71 (d, J = 8.0 Hz, 1H), 7.61 (m, 4H), 7.58 (m, 1H), 7.52 (m, 6H), 7.42 (m, 2H), 7.39 (m, 2H). 13C NMR (CDCl3): δ 141.92, 140.78, 140.74, 140.44, 137.77, 137.65, 137.43, 136.89, 136.03, 131.79, 131.75, 131.29, 130.97, 130.62, 130.49, 130.31, 129.91, 129.29, 129.22, 128.93, 128.15, 127.51, 127.21, 127.19, 127.16, 127.09, 127.07, 125.46, 125.44, 125.06, 124.63, 124.10, 124.06, 123.96, 123.92, 122.75, 77.20 (CF3). 19F NMR (CDCl3): δ–62.6. Anal. Calcd. for C45H29F3: C, 86.24; H, 4.66. Found: C, 85.78; H, 4.20.

2.2.3. Data for 9,10-di(naphthalen-2-yl)-2-(3-(trifluoromethyl)phenyl)anthracene (3)

Pale yellow solid (0.31 g, 46%). 1H NMR (CDCl3): δ 8.11 (d, J = 7.78 Hz, 2H), 8.04 (m, 4H), 7.94 (m, 3H), 7.86 (d, J = 8.0 Hz, 1H), 7.74 (m, 3H), 7.66 (m, 3H), 7.61 (m, 4H), 7.54 (dd, J = 8.2, 7.6 Hz, 1H), 7.50 (d, J = 7.6 Hz, 1H), 7.42 (t, J = 8.4 Hz, 2H), 7.32 (q, J = 8.2 Hz, 2H). 13C NMR (CDCl3): δ 141.84, 137.62, 137.12, 136.31, 136.21, 136.17, 133.44, 133.42, 132.86, 132.82, 131.20, 130.88, 130.65, 130.42, 130.33, 130.25, 130.00, 129.47, 129.45, 129.33, 129.24, 128.20, 128.16, 128.15, 128.11, 127.96, 127.94, 127.14, 127.10, 126.54, 126.50, 126.33, 125.48, 125.44, 125.09, 124.73, 124.08, 124.04, 123.93, 122.70, 77.20 (CF3). 19F NMR (CDCl3): δ–62.6. Anal. Calcd. for C41H25F3: C, 85.70; H, 4.39. Found: C, 85.21; H, 3.98.

2.3. Cyclic Voltammetry

Cyclic voltammetry measurements of 1–3 were performed by a three-electrode cell configuration system consisting of platinum working and counter electrodes and a Ag/AgNO3 (0.1 M in CH3CN) reference electrode at room temperature. The solvent was acetonitrile (CH3CN) and 0.1 M tetrabutylammonium hexafluorophosphate was used as the supporting electrolyte. All solvents were sufficiently degassed for 1 h before use. The oxidation potentials were recorded at a scan rate of 100 mV/s and reported with reference to the ferrocene/ferrocenium (Fc/Fc+) redox couple.

2.4. Device Fabrication and Characterization

The OLED devices were fabricated on glass substrates precoated with a 150 nm thick indium tin oxide (ITO) layer with a sheet resistance of ~10 Ω per square. The ITO glass was cleaned with ultrasonication in deionized (DI) water, detergent, acetone, methanol and DI water for 10 min each in sequence. Then, the ITO substrate was dried with N2 gas flow and treated with UV-ozone for 15 min at 100 °C. After the cleaning procedure, the ITO substrate was loaded into a high-vacuum chamber at a base pressure of <1.0 × 10−7 Torr. The 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl (NPB), tris(8-hydoxyquinolinato)aluminum (Alq3), and DPAVBi were purchased from Luminescence Technology Corp. and they were used without further purification. The organic materials and LiF were sequentially deposited onto the substrate with thermal evaporation using Knudsen cells. The NPB and Alq3 were deposited with a rate of 0.8 Å·s−1 while each host material and DPAVBi were codeposited with a rate of 0.2 Å·s−1 and 0.016 Å·s−1. After that, the sample was transferred to another high-vacuum chamber without breaking vacuum, and then Al was deposited using a BN boat at a rate of ~1 Å·s−1. The total thicknesses and deposition rates were monitored with a quartz crystal microbalance. The device area was 0.04 cm2. The current density–voltage–luminance (J–V–L) characteristics of the OLEDs were measured using two Keithley 2400 source measure units and a Si photodiode. The electroluminescence (EL) spectra were measured using a PR650 spectroradiometer (StellarNet Inc., Tampa, FL, USA). Assuming Lambertian emission, the external quantum efficiency (EQE) was calculated from the measured J–V–L characteristics and EL spectrum.

3. Results and Discussion

3.1. Synthesis and Characterization

Scheme 1 shows the synthetic routes for new 3-CF3-phenyl substituted DAA compounds 1–3. The precursors (1a–3a) of the anthracene derivatives were produced by the reaction between 2-bromoanthracene-9,10-dione and lithium salts of each bromoaryl compound, followed by acidification in a relatively high yield (i.e., 46–61%). These precursors could be readily converted into the final products 1–3 from the Suzuki-Miyaura coupling with (3-CF3-phenyl) boronic acid in moderate yields (44–48%). The formation of compounds 1–3 was confirmed by 1H, 13C NMR, 19F NMR spectroscopy (Figures S1–S6, Supplementary Materials), and elemental analysis (EA). The 1H and 13C NMR spectra of all DAA derivatives were in good agreement with the predicted structures. The 19F NMR signals of 1–3 detected around δ–62 ppm also indicated the presence of the CF3-phenyl unit. Moreover, the chemical shifts of the resonances associated with the proton and carbon atoms in these molecules were in the expected range.

3.2. Thermal Properties

The thermal properties of DAA derivatives 1–3 were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) under dinitrogen atmosphere. Compounds 1–3 exhibited Td5 values of 262, 387, and 358 °C, respectively, indicating that the terminal naphthyl and biphenyl groups showed greater heat-resistant properties than the phenyl moiety. Such a good thermal stability of compounds 1–3 was enough to stand the high temperature for the vacuum vapor deposition. These results clearly showed that the bulky aromatic groups on the C9 and C10 positions of the anthracene moiety led to an enhanced thermal stability. A DSC analysis was performed from 25 to 125 °C (for 1) or 180 °C (for 2 and 3) at a heating rate of 10 °C/min to investigate the morphological stability of 1–3. Figure 1 shows that the glass transition temperature (Tg) of 1–3 was obtained at 65, 121, and 118 °C, respectively.

3.3. Photophysical and Electrochemical Properties

The photophysical properties of DAA compounds 1–3 were investigated by UV–Vis absorption and photoluminescence (PL) spectroscopy (Figure 2 and Table 1). The absorption spectra of 1–3 in dichloromethane (1.0 × 10−5 M) displayed the typical ππ* vibronic transition patterns (λabs = 365, 384, and 405 nm for 1 and λabs = 367, 386, and 407 nm for 2 and 3, Table 1) derived from the isolated anthracene moieties. The absorption maximum point (λabs) of 2 and 3 was slightly red-shifted by ca. 2 nm compared to that of compound 1. These features were also shown in the fluorescence spectra of each compound. The emission maxima (λem) of 1–3 were observed at 429 nm for 1 and 439 nm for 2 and 3 (Table 1), respectively. Accordingly, the red-shifted spectra of 2 and 3 distinctively implied that both the naphthyl and biphenyl moiety had a slightly stronger electron-donating property than the phenyl group and, thus, could induce the narrow band gaps. The band gaps estimated from the absorption edge for 2 and 3 were indeed slightly narrower than that of 1 (2.93 eV for 2 or 3 and 2.98 eV for 1, Table 1). Furthermore, the PL spectra of all compounds were similar to the previously reported DAA derivatives (Figure 2) [44] assignable to the lowest ππ* transition on the anthracene units.
The electrochemical properties of 1–3 were examined by cyclic voltammetry (CV) measurements (Figure 3). From the first oxidation onset potential, the highest occupied molecular orbital (HOMO) energy levels of 1–3 were calculated to be −5.51, −5.61, and −5.55 eV, respectively. The LUMO levels can be estimated by combining the HOMO level and the optical band gap (Eg) determined from the edge of the UV–Vis absorption spectra. Consequently, the energy levels of 1–3 were also calculated as −2.53, −2.69, and −2.62 eV, respectively (Table 1). Such values indicated that DAA compounds 1–3 had suitable frontier energy levels and wide energy band gaps (Eg) of ca. 2.9–3.0 eV as host materials for blue emission in OLED. The quantum yields (Φ) of 1–3 were calculated as 0.24, 0.21 and 0.22, respectively, which are similar to each other (Table 1).

3.4. Electroluminescent Properties

The anthracene-based compounds 1–3 were investigated as blue host materials by fabricating multi-layer OLEDs with a DPAVBi dopant. Figure 4 presents the energy diagram of the OLEDs and the molecular structure of the organic materials used in the OLEDs. NPB was selected as the hole transport layer (HTL) material due to its having similar HOMO energy levels to 1–3 (ca. 5.5–5.6 eV) and NPB (ca. 5.4 eV). Figure 4 illustrates that the devices were fabricated with the following configuration: ITO/NPB (40 nm)/1, 2, or 3 (30 nm, DPAVBi (8 wt %))/Alq3 (30 nm)/LiF (0.5 nm)/Al (100 nm) device, where ITO is the anode; NPB is the HTL; the chemically purified anthracene derivatives 1, 2 or 3 (host) and DPAVBi (dopant) served as the emission layer (EML); Alq3 was the electron transport layer (ETL); and a thin LiF served as the electron injection layer at the Al cathode interface.
Figure 5a shows the EL spectra of the OLEDs using 1–3 with a DPAVBi dopant. All devices exhibited the expected blue emissions and their main EL peaks were commonly observed at 488 and 512 nm with a shoulder peak at 556 nm. The peak intensity at 512 nm was somewhat higher than the reported EL features of DPAVBi, which was attributed to the slight emission from Alq3. The maximum EL peak was observed at 488 nm for 1 and 2 and at 512 nm for 3 because of the increased Alq3 emission originating from the inefficient charge transport to the EML in 3-based OLEDs.
Figure 5b shows the measured L–V characteristics of the 1–3-based OLEDs with an 8 wt % ratio of DPAVBi. At 10 V, the 1–3-based OLEDs showed an L of 2153.5, 243.0, and 156.3 cd·m−2, respectively. The inset shows the measured J–V characteristics of the OLEDs. Moreover, at 10 V, the 1–3-based OLEDs presented a J of 91.6, 16.4, and 13.2 mA·cm−2, respectively. We defined the turn-on and operating voltages as the voltages providing the L of 1 and 100 cd·m−2. As a result, the turn-on voltage of the 1–3-based OLEDs was 6.0, 7.8, and 8.5 V, while the operating voltage was 7.4, 9.4, and 9.8 V, respectively. The current efficiency of 1–3 based OLEDs at the operating voltage was 2.1, 1.4, and 1.1 cd A−1, respectively. Meanwhile, the power efficiency of the 1–3-based OLEDs at the operating voltage was 0.9, 0.5, and 0.4 lm·W−1. Combining the J–V–L characteristics and the EL spectra, the external quantum efficiency (EQE) of the 1–3-based OLEDs at the operating voltage was calculated as 0.8%, 0.5%, and 0.4%. The Commission Internationale de l’Eclairage (CIE) color coordinates for 1–3 appeared at (0.25, 0.51), (0.25, 0.51), and (0.27, 0.52), respectively. Table 2 summarizes the measured device parameters. These results clearly indicated that the 1-based OLEDs showed superior charge transport and light emission abilities among all devices. Although the turn-on voltages of these devices were a little high, and the efficiencies was not outstanding, the results exhibit the possibilities of these anthracene-based compounds as blue-host materials in OLEDs.

4. Conclusions

New anthracene-based blue-host materials 1–3 were synthesized and characterized in this study. The anthracene derivatives possessed high thermal stability and proper frontier-energy levels suitable as novel host materials for blue OLEDs. Relevant further studies using various anthracene derivatives to enhance the device performance are in progress.

Supplementary Materials

The following are available online at https://www.mdpi.com/2076-3417/7/11/1109/s1, Figures S1–S6 Multinuclear NMR spectra of compounds 1–3.

Acknowledgments

This work was supported by the Nano Material Technology Development Program (NRF-2016M3A7B4909246 for Kang Mun Lee) and Basic Science Research Program (NRF-2015R1C1A1A01055026 for Hyunbok Lee) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning. Yongseog Chung acknowledges the Basic Science Research Program (NRF-2017R1D1A1B03031911) through the National Research Foundation of Korea (NRF) funded by the Ministry of Education and the support from the research grant of Chungbuk National University in 2015.

Author Contributions

Sang Woo Kwak and Ji-Eun Lee performed the experiments for synthesis of compounds and analyzed the data; Kang Mun Lee, Hyoshik Kwon, Myung Hwan Park and Yongseog Chung analyzed the data and wrote the paper; Jisu Yoo, Yeonjin Yi and Hyunbok Lee performed the experiments for EL fabrications, analyzed the data and wrote the paper.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Tang, C.W.; VanSlyke, S.A. Organic electroluminescent diodes. Appl. Phys. Lett. 1987, 51, 913–915. [Google Scholar] [CrossRef]
  2. Burroughes, J.H.; Bradley, D.D.C.; Brown, A.R.; Marks, R.N.; Mackay, K.; Friend, R.H.; Burns, P.L.; Holmes, A.B. Light-emitting diodes based on conjugated polymers. Nature 1990, 347, 539–541. [Google Scholar] [CrossRef]
  3. Kido, J.; Kimura, M.; Nagai, K. Multilayer white light-emitting organic electroluminescent device. Science 1995, 267, 1332–1334. [Google Scholar] [CrossRef] [PubMed]
  4. D’Andrade, B.W.; Thompson, M.E.; Forrest, S.R. Controlling exciton diffusion in multilayer white phosphorescent organic light emitting devices. Adv. Mater. 2002, 14, 147–151. [Google Scholar] [CrossRef]
  5. Li, J.; Zhang, T.; Liang, Y.; Yang, R. Solution-processible carbazole dendrimers as host materials for highly efficient phosphorescent organic light-emitting diodes. Adv. Funct. Mater. 2013, 23, 619–628. [Google Scholar] [CrossRef]
  6. Lee, S.-J.; Park, J.-S.; Song, M.; Shin, I.A.; Kim, Y.-I.; Lee, J.W.; Kang, J.-W.; Gal, Y.-S.; Kang, S.; Lee, J.Y.; et al. Synthesis and characterization of red-emitting iridium(III) complexes for solution-processable phosphorescent organic light-emitting diodes. Adv. Funct. Mater. 2009, 19, 2205–2212. [Google Scholar] [CrossRef]
  7. Thiery, S.; Tondelier, D.; Geffroy, B.; Jacques, E.; Robin, M.; Métivier, R.; Jeannin, O.; Rault-Berthelot, J.; Poriel, C. Spirobifluorene-2,7-dicarbazole-4′-phosphine oxide as host for high-performance single-layer green phosphorescent OLED devices. Org. Lett. 2015, 17, 4682–4685. [Google Scholar] [CrossRef] [PubMed]
  8. Thiery, S.; Tondelier, D.; Declairieux, C.; Geffroy, B.; Jeannin, O.; Métivier, R.; Rault-Berthelot, J.; Poriel, C. 4-Pyridyl-9,9′-spirobifluorenes as host materials for green and sky-blue phosphorescent OLEDs. J. Phys. Chem. C 2015, 119, 5790–5805. [Google Scholar] [CrossRef]
  9. Wang, Y.-K.; Sun, Q.; Wu, S.-F.; Yuan, Y.; Li, Q.; Jiang, Z.-Q.; Fung, M.-K.; Liao, L.-S. Thermally activated delayed fluorescence material as host with novel spiro-based skeleton for high power efficiency and low roll-off blue and white phosphorescent devices. Adv. Fucnt. Mater. 2016, 26, 7929–7936. [Google Scholar] [CrossRef]
  10. Xue, M.-M.; Huang, C.-C.; Yuan, Y.; Cui, L.-S.; Li, Y.-X.; Wang, B.; Jiang, Z.-Q.; Fung, M.-K.; Liao, L.-S. De novo design of boron-based host materials for highly efficient blue and white phosphorescent OLEDs with low efficiency roll-off. ACS Appl. Mater. Interfaces 2016, 8, 20230–20236. [Google Scholar] [CrossRef] [PubMed]
  11. Poriel, C.; Rault-Berthelota, J. Structure–property relationship of 4-substituted-spirobifluorenes as hosts for phosphorescent organic light emitting diodes: An overview. J. Mater. Chem. C 2017, 5, 3869–3897. [Google Scholar] [CrossRef]
  12. Yang, X.; Xu, X.; Zhou, G. Recent advances of the emitters for high performance deep-blue organic light-emitting diodes. J. Mater. Chem. C 2015, 3, 913–944. [Google Scholar] [CrossRef]
  13. Seifert, R.; Rabelo de Moraes, I.; Scholz, S.; Gather, M.C.; Lüssem, B.; Leo, K. Chemical degradation mechanisms of highly efficient blue phosphorescent emitters used for organic light emitting diodes. Org. Electron. 2013, 14, 115–123. [Google Scholar] [CrossRef]
  14. Kim, D.Y.; Kim, Y.S.; Kim, S.H.; Jeong, S.; Lee, S.E.; Kim, Y.K.; Yoon, S.S. Synthesis and electroluminescent properties of tert-butylated arylamine substituted 9,10-diphenylanthracene derivatives for organic light-emitting diodes. Synth. Met. 2016, 220, 628–634. [Google Scholar] [CrossRef]
  15. Wang, Z.; Liu, W.; Xu, C.; Ji, B.; Zheng, C.; Zhang, X. Excellent deep-blue emitting materials based on anthracene derivatives for non-doped organic light-emitting diodes. Opt. Mater. 2016, 58, 260–267. [Google Scholar] [CrossRef]
  16. Park, J.K.; Lee, K.H.; Kang, S.; Lee, J.Y.; Park, J.S.; Seo, J.H.; Kim, Y.K.; Yoon, S.S. Highly efficient blue-emitting materials based on 10-naphthylanthracene derivatives for OLEDs. Org. Electron. 2010, 11, 905–915. [Google Scholar] [CrossRef]
  17. Park, H.; Lee, J.; Kang, I.; Chu, H.Y.; Lee, J.-I.; Kwon, S.-K.; Kim, Y.-H. Highly rigid and twisted anthracene derivatives: A strategy for deep blue OLED materials with theoretical limit efficiency. J. Mater. Chem. 2012, 22, 2695–2700. [Google Scholar] [CrossRef]
  18. Cho, I.; Kim, S.H.; Kim, J.H.; Park, S.; Park, S.Y. Highly efficient and stable deep-blue emitting anthracene-derived molecular glass for versatile types of non-doped OLED applications. J. Mater. Chem. 2012, 22, 123–129. [Google Scholar] [CrossRef]
  19. Bin, J.-K.; Hong, J.-I. Efficient blue organic light-emitting diode using anthracene-derived emitters based on polycyclic aromatic hydrocarbons. Org. Electron. 2011, 12, 802–808. [Google Scholar] [CrossRef]
  20. Lee, K.H.; You, J.N.; Kang, S.; Lee, J.Y.; Kwon, H.J.; Kim, Y.K.; Yoon, S.S. Synthesis and electroluminescent properties of blue-emitting t-butylated bis(diarylaminoaryl) anthracenes for OLEDs. Thin Solid Films 2010, 518, 6253–6258. [Google Scholar] [CrossRef]
  21. Zheng, C.-J.; Zhao, W.-M.; Wang, Z.-Q.; Huang, D.; Ye, J.; Ou, X.-M.; Zhang, X.-H.; Lee, C.-S.; Lee, S.-T. Highly efficient non-doped deep-blue organic light-emitting diodes based on anthracene derivatives. J. Mater. Chem. 2010, 20, 1560–1566. [Google Scholar] [CrossRef]
  22. Kim, S.-K.; Yang, B.; Ma, Y.; Lee, J.-H.; Park, J.-W. Exceedingly efficient deep-blue electroluminescence from new anthracenes obtained using rational molecular design. J. Mater. Chem. 2008, 18, 3376–3384. [Google Scholar] [CrossRef]
  23. Park, J.-Y.; Jung, S.Y.; Lee, J.Y.; Baek, Y.G. High efficiency in blue organic light-emitting diodes using an anthracene-based emitting material. Thin Solid Films 2008, 516, 2917–2921. [Google Scholar] [CrossRef]
  24. Shih, P.-I.; Chuang, C.-Y.; Chien, C.-H.; Diau, E.W.-G.; Shu, C.-F. Highly efficient non-doped blue-light-emitting diodes based on an anthrancene derivative end-capped with tetraphenylethylene groups. Adv. Funct. Mater. 2007, 17, 3141–3146. [Google Scholar] [CrossRef]
  25. Zhang, Y.; Lai, S.-L.; Tong, Q.-X.; Lo, M.-F.; Ng, T.-W.; Chan, M.-Y.; Wen, Z.-C.; He, J.; Jeff, K.-S.; Tang, X.-L.; et al. High efficiency nondoped deep-blue organic light emitting devices based on imidazole-π-triphenylamine derivatives. Chem. Mater. 2012, 24, 61–70. [Google Scholar] [CrossRef]
  26. Thangthong, A.; Meunmart, D.; Prachumrak, N.; Jungsuttiwong, S.; Keawin, T.; Sudyoadsuk, T.; Promarak, V. Bifunctional anthracene derivatives as non-doped blue emitters and hole-transporters for electroluminescent devices. Chem. Commun. 2011, 47, 7122–7124. [Google Scholar] [CrossRef] [PubMed]
  27. Sun, Y.; Duan, L.; Zhang, D.; Qiao, J.; Dong, G.; Wang, L.; Qiu, Y. A pyridine-containing anthracene derivative with high electron and hole mobilities for highly efficient and stable fluorescent organic light-emitting diodes. Adv. Funct. Mater. 2011, 21, 1881–1886. [Google Scholar] [CrossRef]
  28. Choi, I.-S.; Kim, S.H.; Ahn, H.-C.; Kim, Y.; Chung, Y. 2-Triphenylsilyl-9,10-di-1-naphthalenylanthracene and its application for blue organic light emitting diodes. Bull. Korean Chem. Soc. 2013, 34, 2211–2214. [Google Scholar] [CrossRef]
  29. Lyu, Y.-Y.; Kwak, J.; Kwon, O.; Lee, S.-H.; Kim, D.; Lee, C.; Char, K. Silicon-cored anthracene derivatives as host materials for highly efficient blue organic light-emitting devices. Adv. Mater. 2008, 20, 2720–2729. [Google Scholar] [CrossRef] [PubMed]
  30. Lee, K.H.; Park, J.K.; Seo, J.H.; Park, S.W.; Kim, Y.S.; Kim, Y.K.; Yoon, S.S. Efficient deep-blue and white organic light-emitting diodes based on triphenylsilane-substituted anthracene derivatives. J. Mater. Chem. 2011, 21, 13640–13648. [Google Scholar] [CrossRef]
  31. Kim, R.; Lee, S.; Kim, K.-H.; Lee, Y.-J.; Kwon, S.-K.; Kim, J.-J.; Kim, Y.-H. Extremely deep blue and highly efficient non-doped organic light emitting diodes using an asymmetric anthracene derivative with a xylene unit. Chem. Commun. 2013, 49, 4664–4666. [Google Scholar] [CrossRef] [PubMed]
  32. Wee, K.-R.; Han, W.-S.; Kim, J.-E.; Kim, A.-L.; Kwon, S.; Kang, S.O. Asymmetric anthracene-based blue host materials: Synthesis and electroluminescence properties of 9-(2-naphthyl)-10-arylanthracenes. J. Mater. Chem. 2011, 21, 1115–1123. [Google Scholar] [CrossRef]
  33. Choi, I.-S.; Jeong, M.-H.; Lee, S.H.; Park, M.H.; Chung, Y. Synthesis of asymmetric anthracene derivatives and their application for blue organic light-emitting diodes. Bull. Korean Chem. Soc. 2016, 37, 136–141. [Google Scholar] [CrossRef]
  34. Wu, C.-H.; Chien, C.-H.; Hsu, F.-M.; Shih, P.-I.; Shu, C.-F. Efficient non-doped blue-light-emitting diodes incorporating an anthracene derivative end-capped with fluorene groups. J. Mater. Chem. 2009, 19, 1464–1470. [Google Scholar] [CrossRef]
  35. Chang, Y.-C.; Yeh, S.-C.; Chen, Y.-H.; Chen, C.-T.; Lee, R.-H.; Jeng, R.-J. New carbazole-substituted anthracene derivatives based non-doped blue light-emitting devices with high brightness and efficiency. Dyes Pigments 2013, 99, 577–587. [Google Scholar] [CrossRef]
  36. Chen, Y.-H.; Lin, S.-L.; Chang, Y.-C.; Chen, Y.-C.; Lin, J.-T.; Lee, R.-H.; Kuo, W.-J.; Jeng, R.-J. Efficient non-doped blue light emitting diodes based on novel carbazole-substituted anthracene derivatives. Org. Electron. 2012, 13, 43–52. [Google Scholar] [CrossRef]
  37. Wu, C.-L.; Chang, C.-H.; Chang, Y.-T.; Chen, C.-T.; Chen, C.-T.; Su, C.-J. High efficiency non-dopant blue organic light-emitting diodes based on anthracene-based fluorophores with molecular design of charge transport and red-shifted emission proof. J. Mater. Chem. C 2014, 2, 7188–7200. [Google Scholar] [CrossRef]
  38. Jo, W.J.; Kim, K.-H.; No, H.C.; Shin, D.-Y.; Oh, S.-J.; Son, J.-H.; Kim, Y.-H.; Cho, Y.-K.; Zhao, Q.-H.; Lee, K.-H.; et al. High efficient organic light emitting diodes using new 9,10-diphenylanthracene derivatives containing bulky substituents on 2,6-positon. Synth. Met. 2009, 159, 1359–1364. [Google Scholar] [CrossRef]
  39. Romain, M.; Tondelier, D.; Geffroy, B.; Jeannin, O.; Jacques, E.; Rault-Berthelot, J.; Poriel, C. Donor/acceptor dihydroindeno[1,2-a]fluorene and dihydroindeno[2,1-b]fluorene: Towards new families of organic semiconductors. Chem. Eur. J. 2015, 21, 9426–9439. [Google Scholar] [CrossRef] [PubMed]
  40. Gao, F.; Ren, J.; Li, Z.; Yuan, S.; Wu, Z.; Cui, Y.; Jia, H.; Wang, H.; Shi, F.; Hao, Y. Trifluoromethyl-substituted 9,9′-bianthracene derivative as host material for highly efficient blue OLED. Opt. Mater. Express 2015, 5, 2468–2477. [Google Scholar] [CrossRef]
  41. Yu, Y.; Wu, Z.; Li, Z.; Jiao, B.; Li, L.; Ma, L.; Wang, D.; Zhou, G.; Hou, X. Highly efficient deep-blue organic electroluminescent devices (CIEy ≈ 0.08) doped with fluorinated 9,9′-bianthracene derivatives (fluorophores). J. Mater. Chem. C 2013, 1, 8117–8127. [Google Scholar] [CrossRef]
  42. Armarego, W.L.F.; Chai, C.L.L. Purification of Laboratory Chemicals, 6th ed.; Elsevier: Waltham, MA, USA, 2009; pp. 61–79. [Google Scholar]
  43. Shin, M.-G.; Kim, S.O.; Park, H.Y.; Park, S.J.; Yu, H.S.; Kim, Y.-H.; Kwon, S.-K. Synthesis and characterization of ortho-twisted asymmetric anthracene derivatives for blue organic light emitting diodes (OLEDs). Dyes Pigments 2012, 92, 1075–1082. [Google Scholar] [CrossRef]
  44. Park, J.-W.; Kang, P.; Park, H.; Oh, H.-Y.; Yang, J.-H.; Kim, Y.-H.; Kwon, S.-K. Synthesis and properties of blue-light-emitting anthracene derivative with diphenylamino-fluorene. Dyes Pigments 2010, 85, 93–98. [Google Scholar] [CrossRef]
Applsci 07 01109 sch001 550
Scheme 1. Synthetic routes for diarylanthracene (DAA) derivatives 1–3. Reagents and conditions: (i) bromobenzene (for 1), 4-bromobiphenyl (for 2) or 2-bromonaphthalene (for 3), n-BuLi, THF, −78 °C, (ii) KI, NaPO2H2, acetic acid, (iii) 3-trifluoromethylphenylboronic acid, CuI, Pd(PPh3)4, K2CO3, toluene/H2O/ethanol (v/v/v, 2:1:1), 110 °C, 24 h.
Scheme 1. Synthetic routes for diarylanthracene (DAA) derivatives 1–3. Reagents and conditions: (i) bromobenzene (for 1), 4-bromobiphenyl (for 2) or 2-bromonaphthalene (for 3), n-BuLi, THF, −78 °C, (ii) KI, NaPO2H2, acetic acid, (iii) 3-trifluoromethylphenylboronic acid, CuI, Pd(PPh3)4, K2CO3, toluene/H2O/ethanol (v/v/v, 2:1:1), 110 °C, 24 h.
Applsci 07 01109 sch001
Applsci 07 01109 g001 550
Figure 1. (a) Thermogravimetric Analysis (TGA) curves and (b) the second heating differential scanning calorimetry (DSC) curves of 1–3 at 10 °C/min.
Figure 1. (a) Thermogravimetric Analysis (TGA) curves and (b) the second heating differential scanning calorimetry (DSC) curves of 1–3 at 10 °C/min.
Applsci 07 01109 g001
Applsci 07 01109 g002 550
Figure 2. Ultraviolet-Visible (UV–Vis) absorption (left side) and photoluminescence (PL) spectra (right side) in dichloromethane (1.0 × 10−5 M, λex = 373 nm) for 1–3.
Figure 2. Ultraviolet-Visible (UV–Vis) absorption (left side) and photoluminescence (PL) spectra (right side) in dichloromethane (1.0 × 10−5 M, λex = 373 nm) for 1–3.
Applsci 07 01109 g002
Applsci 07 01109 g003 550
Figure 3. Cyclic voltammograms of (a) 1, (b) 2 and (c) 3 (5 × 10−4 M in acetonitrile, scan rate = 100 mV/s).
Figure 3. Cyclic voltammograms of (a) 1, (b) 2 and (c) 3 (5 × 10−4 M in acetonitrile, scan rate = 100 mV/s).
Applsci 07 01109 g003
Applsci 07 01109 g004 550
Figure 4. Energy diagram of the organic light-emitting diodes (OLEDs) using 1–3 with N,N-diphenylamino phenyl vinyl biphenyl (DPAVBi) (8 wt %) as an emitter and molecular structures of each compound; NPB, 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl; ITO, indium tin oxide; HTL, hole transport layer； EML, ETL, emission layer; electron transport layer.
Figure 4. Energy diagram of the organic light-emitting diodes (OLEDs) using 1–3 with N,N-diphenylamino phenyl vinyl biphenyl (DPAVBi) (8 wt %) as an emitter and molecular structures of each compound; NPB, 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl; ITO, indium tin oxide; HTL, hole transport layer； EML, ETL, emission layer; electron transport layer.
Applsci 07 01109 g004
Applsci 07 01109 g005 550
Figure 5. (a) EL spectra of the OLEDs using 1–3 with DPAVBi and (b) L–V characteristics of the OLEDs (the inset shows J–V characteristics).
Figure 5. (a) EL spectra of the OLEDs using 1–3 with DPAVBi and (b) L–V characteristics of the OLEDs (the inset shows J–V characteristics).
Applsci 07 01109 g005
Table
Table 1. Photophysical and electrochemical properties of 1–3.
Table 1. Photophysical and electrochemical properties of 1–3.
Compoundλabs 1 (nm)λem 1 (nm)Eg 2 (eV)Eox 3 (V)HOMO 4 (eV)LUMO 5 (eV)Tg (°C)Td5 (°C)Φ 6
1365, 384, 4054292.981.11−5.51−2.53652620.24
2367, 386, 4074392.931.22−5.62−2.691213870.21
3367, 386, 4074392.931.15−5.55−2.621183580.22
1 1.0 × 10−5 M in CH2Cl2. 2 Estimated from the absorption edge. 3 Oxidation onset potential vs. a Fc/Fc+ couple. 4 Calculated from the Eox. 5 Estimated from the HOMO and band-gap (Eg) energies. 6 Quantum yield measured using quinine sulfate as a standard (0.5 M H2SO4, Φ = 0.55) in CH2Cl2 (1.0 × 10−5 M). HOMO, highest occupied molecular orbital; LUMO, lowest unoccupied molecular orbital.
Table
Table 2. Device parameters of the 1–3-based organic light-emitting diodes (OLEDs) from the current density–voltage–luminance (J–V–L) characteristics and the electroluminescent (EL) spectra.
Table 2. Device parameters of the 1–3-based organic light-emitting diodes (OLEDs) from the current density–voltage–luminance (J–V–L) characteristics and the electroluminescent (EL) spectra.
CompoundTurn-on Voltage 1 (V)Operating Voltage 2 (V)Current Efficiency 3 (cd·A−1)Power Efficiency 3 (lm·W−1)EQE 3 (%)CIE (x, y)
1 (8%)6.07.42.10.90.8(0.25, 0.51)
2 (8%)7.89.41.40.50.5(0.25, 0.51)
3 (8%)8.59.81.10.40.4(0.27, 0.52)
1 Voltage at 1 cd/m2. 2 Voltage at 100 cd/m2. 3 Detected at the operating voltage. EQE, external quantum efficiency; CIE, Commission Internationale de l’Eclairage.

Share and Cite

MDPI and ACS Style

Kwak, S.W.; Lee, K.M.; Lee, J.-E.; Yoo, J.; Yi, Y.; Kwon, H.; Lee, H.; Park, M.H.; Chung, Y. Synthesis and Electroluminescence Properties of 3-(Trifluoromethyl)phenyl-Substituted 9,10-Diarylanthracene Derivatives for Blue Organic Light-Emitting Diodes. Appl. Sci. 2017, 7, 1109. https://doi.org/10.3390/app7111109

AMA Style

Kwak SW, Lee KM, Lee J-E, Yoo J, Yi Y, Kwon H, Lee H, Park MH, Chung Y. Synthesis and Electroluminescence Properties of 3-(Trifluoromethyl)phenyl-Substituted 9,10-Diarylanthracene Derivatives for Blue Organic Light-Emitting Diodes. Applied Sciences. 2017; 7(11):1109. https://doi.org/10.3390/app7111109

Chicago/Turabian Style

Kwak, Sang Woo, Kang Mun Lee, Ji-Eun Lee, Jisu Yoo, Yeonjin Yi, Hyoshik Kwon, Hyunbok Lee, Myung Hwan Park, and Yongseog Chung. 2017. "Synthesis and Electroluminescence Properties of 3-(Trifluoromethyl)phenyl-Substituted 9,10-Diarylanthracene Derivatives for Blue Organic Light-Emitting Diodes" Applied Sciences 7, no. 11: 1109. https://doi.org/10.3390/app7111109

APA Style

Kwak, S. W., Lee, K. M., Lee, J. -E., Yoo, J., Yi, Y., Kwon, H., Lee, H., Park, M. H., & Chung, Y. (2017). Synthesis and Electroluminescence Properties of 3-(Trifluoromethyl)phenyl-Substituted 9,10-Diarylanthracene Derivatives for Blue Organic Light-Emitting Diodes. Applied Sciences, 7(11), 1109. https://doi.org/10.3390/app7111109

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop