1. Introduction
The skin is composed of the epidermis, dermis, and subcutaneous tissue, and the dermis is composed of collagen fibers, which are extremely important in maintaining the skin structure, account for more than 70% of the total content, and form flexible and elastic dermal tissue. The proteins that make up collagen fibers are produced by fibroblasts, which interact with collagen fibers to form flexible and elastic dermal tissue. The types of collagen produced by cultured human fibroblasts are type I, type V, type VII, and type XV [
1]. Type I collagen accounts for approximately 80% of the collagen in the dermis and is an essential protein for skin elasticity. Type I collagen is synthesized when procollagen, a precursor of collagen, is secreted out of fibroblasts. The N- and C-termini of procollagen are cleaved by proteases to synthesize collagen molecules [
2], and the collagen molecules polymerize to form collagen fibrils. This fibrillar structure maintains the structure of the dermis. Fibrillin is a 350 kDa glycoprotein involved in the synthesis of microfibrils and elastic fibers in connective tissue [
3] and is produced by fibroblasts [
4]. Fibrillins 1, 2, and 3 are present in humans, and fibrillin 1 exhibits the highest expression [
3]. Elastic fibers in the dermis are formed by the deposition of tropoelastin, fibrin 5, and other substances on the microfibrils of fibrillin 1. Since fibrillin 1 mRNA expression is decreased in photoaged skin [
4], it is thought to affect elastic fibers, leading to the formation of wrinkles and sagging.
Collagen gel contraction is a phenomenon in which fibroblasts pull and contract collagen fibers. When collagen extracted from tissue is placed under neutral and physiological ionic strength at 37 °C, collagen fibers are reconstituted into collagen gel. When fibroblasts are cultured in collagen gel, the fibroblasts pull and contract the collagen fibers, causing them to orientate, and the reconstituted collagen gel becomes more flexible, elastic, and strong to form a dermis-like structure. Thus, the contracted gel obtained by fibroblast collagen gel contraction is considered a model for dermal tissue [
5]. Fibroblasts derived from elderly individuals have lower collagen gel contractile activity than fibroblasts derived from young people, and aging is thought to decrease the gel contractile activity of fibroblasts [
6]. This finding suggests that when the contractile activity of collagen gel decreases due to aging, the dermal tissue cannot be contracted and maintained in a tightened state as it was when the skin was young. In other words, wrinkles, sagging, and a lack of firmness in skin associated with aging are caused by a decrease in tissue contractility of dermal fibroblasts and a loss of flexibility, elasticity, and strength; thus, increasing the collagen fiber contractile activity of dermal fibroblasts is expected to improve wrinkles, sagging, and the lack of firmness in the skin. It is also known that phosphorylation of myosin light chain 2 is involved in collagen gel contraction [
7].
The aminocarbonylation of lysine and arginine residues in dermal collagen cross-links collagen fibers, causing skin stiffening and wrinkling [
8]. The aminocarbonylation of epidermal basement membranes causes reduced moisturizing and enhanced melanin production [
9]. Skin aminocarbonylation is caused by protein denaturation by peroxides and other agents [
10].
Aquaporins (AQPs) are a family of small transmembrane proteins that facilitate the transport of water across cell membranes, primarily through water pores [
11]. These proteins are ubiquitously expressed in humans, vertebrates, invertebrates, plants, and microorganisms [
12]. Currently, 13 AQPs have been identified in humans and are classified into water-selective AQPs (AQP 0–6, 8), aquaglyceroporins (AQP 3, 7, 9, 10), and super-aquaporins (AQP 11, 12) based primarily on the genetic sequence [
13]. As in a previous study, we analyzed the mRNA expression of human dermal fibroblasts cultured on untreated and glyceraldehyde-treated collagen gels using Gene Chip and confirmed a decrease in the amount of AQP1 mRNA. AQP2 mRNA expression was also observed in cultured human dermal fibroblasts, but AQP2 expression was about one-twentieth that of AQP1. AQP1 mRNA expression was decreased when cultured on glyceraldehyde-treated collagen, but AQP2 mRNA expression was not. This finding suggests that the decrease in AQP1 may be related to the skin problems that occur with aging.
Cell migration takes place by the polymerization of actin monomers (G-actin) toward the direction of travel to form actin filaments (F-actin). Actin fibers contribute to forward movement by interacting with myosin and causing contraction. At the same time, cells transmit forces at adhesion points to the substrate, and actin fibers are involved in such adhesion structures. Actin-binding LIM protein 1 (abLIM1) co-occurs with F-actin, promotes F-actin formation, and plays an important role in the formation of actin fiber networks [
14]. Consistent with its actin-binding properties, abLIM proteins reportedly exhibit stress fiber-like localization upon overexpression and are important for cell migration [
15,
16,
17]. Furthermore, the depletion of abLIM1 reduces the number of stress fibers in NIH3T3 cells, whereas its overexpression increases intracellular F-actin [
18].
This study elucidated the involvement of AQP1 in the motility and collagen gel contraction activity of cultured human dermal fibroblasts and the production of fibrillin 1 and type I collagen.
2. Materials and Methods
2.1. Depletion Operation
Normal diploid fibroblasts (JCRB0541) collected from 34-year-old skin purchased from the National Institutes of Biomedical Innovation, Health, and Nutrition in Japan were used in this study. Cultured human dermal fibroblasts were grown in 6-well plates (AGC Techno Glass Co., Ltd., Shizuoka, Japan), 35 mm dishes with 14 mm φ glass bottoms (Matsunami Glass Ind., Ltd., Osaka, Japan), or 35 mm dishes (AGC Techno Glass Co., Ltd.) in 10% FBS (Serana Europe GmbH, Brandenburg, Germany)-DMEM (Thermo Fisher Scientific Inc., Waltham, MA, USA) and incubated in an incubator (37 °C, 5% CO2) for 1 day. Then, 18 μL of Lipofectamine® RNAiMAX transfection reagent (Thermo Fisher Scientific Inc.) was diluted in 300 μL of Opti-MEM® serum-free medium (Thermo Fisher Scientific Inc.), and 3 μL of Silencer® Select AQP1 siRNA (s1515; Thermo Fisher Scientific Inc.) was diluted in 150 μL of serum-free medium. Transfection reagent diluted in serum-free medium and AQP1 siRNA were mixed at 150 μL and allowed to stand for 5 min at room temperature. This resulting mixture was used as the AQP1 siRNA solution. Equal amounts of transfection reagent and AQP1 siRNA solution diluted in serum-free medium were added to each well or dish in which fibroblasts were cultured and cultured in an incubator (37 °C, 5% CO2) for 2 or 3 days. In the fibrillin 1 and type I collagen staining experiments, Silencer® Select negative control siRNA (4390843; Thermo Fisher Scientific Inc.) was used.
2.2. Observation of the Motility of Cultured Human Dermal Fibroblasts in Which AQP1 Was Depleted by AQP1 siRNA
Fibroblasts cultured in untreated medium (control), medium with the transfection reagent, medium with AQP1 siRNA, and medium with the negative control siRNA were time-lapse photographed for 12 h at 37 °C in the presence of 5% CO2 using an inverted phase contrast microscope (IX70, Olympus, Tokyo, Japan). Images taken at 0, 3, 6, and 12 h were used to measure the migration distance of the cells.
2.3. Observation of the Collagen Gel Contraction of Human Dermal Fibroblasts in Which AQP1 Was Depleted by AQP1 siRNA
Fibroblasts cultured in untreated medium (control), medium with the transfection reagent, or medium with AQP1 siRNA were collected by 0.05% trypsin-EDTA treatment. The collected cell suspension and 10% FBS-DMEM were added at a ratio of 1:1 to a centrifuge tube and centrifuged at 1100 rpm for 5 min, and the cells were collected by decanting. To a 24-well plate on ice, 100 μL of 5 × MEM, 5 μL of 100 × Gluta MAX, 25 μL of FBS, 350 μL of 3 mg/mL of Native collagen (Koken Co., Ltd., Tokyo, Japan), 10 μL of 1 mol/L of NaHCO3, and 20 μL of cultured fibroblasts (2 million cells/mL) were added. The plate was placed in an incubator (37 °C, 5% CO2) for 1 h. The gel attached to the wall of the plate was detached with a syringe needle, and 500 μL of one of the three types of media was added to each well, and the plate was incubated in an incubator (37 °C, 5% CO2) for 5 days. Relative cell counts were obtained using a Cell Counting Kit-8 (Dojindo Chemical Research Institute, Kumamoto, Japan). Cell Counting Kit-8 solution was added and the absorbance of the water-soluble formazan dye after 0 and 2 h was measured at 450 nm using a multi-detection microplate reader (Multi-Detection Microplate POWERSAN HT; BioTek, Winooski, VT, USA). Cell viability was expressed as the difference between the two absorbance values.
2.4. Measurement of AQP1, Phosphorylated Myosin Light Chain 2, F-Actin, abLIM1, Fibrillin 1, and Type I Collagen Staining after AQP1 Depletion by AQP1 siRNA
Cultured human dermal fibroblasts were subjected to depletion for 3 days in Matsunami glass-bottom dishes, as described in
Section 2.1. After removing the medium from the depleted cells and two washes with sterile PBS, 1500 μL of 4% paraformaldehyde-phosphate buffer was added, and the cells were fixed for 15 min at 4 °C. After two washes with sterile PBS, the cells were blocked by treatment with 1 mL of 10% goat serum-PBS for 20 min at room temperature. After two washes with sterile PBS, anti-AQP1 antibody (200-fold dilution; Proteintech Group, Inc., Rosemont, IL, USA), anti-phospho-myosin light chain 2 (Ser19) antibody (50-fold dilution; Cell Signaling Technology, Inc., Danvers, MA, USA), phalloidin-iFluor 555 conjugate (1000-fold dilution; Cayman Chemical Company, Ann Arbor, MI, USA), anti-abLIM1 antibody (100-fold dilution; Proteintech Group, Inc.), anti-fibrillin 1 antibody (200-fold dilution; Millipore Sigma, Burlington, MA, USA), and anti-type I collagen antibody (500-fold dilution; Rockland Immunochemicals, Inc., Limerick, PA, USA) were added to the glass sections and allowed to stand for 1.5 h at room temperature. After washing twice with sterile PBS, Alexa Fluor 647 goat anti-rabbit IgG (H + L) (Thermo Fisher Scientific Inc.) diluted 1000-fold, Alexa Fluor 488 goat anti-rabbit IgG (H + L) (Thermo Fisher Scientific Inc.), Alexa Fluor 488 goat anti-mouse IgG (H + L) (Thermo Fisher Scientific Inc.) diluted 1000-fold, and Alexa Fluor 568 goat anti-rabbit IgG (H + L) (Thermo Fisher Scientific Inc.) diluted 1000-fold were added to the glass sections as secondary antibodies and allowed to stand for 40 min at room temperature. The samples were washed twice with sterile PBS, and 0.2% DAPI (Dojindo Chemical Research Institute)-PBS was added to the glass section and then allowed to stand for 10 min at room temperature. After two washes with sterile PBS, 2 mL of sterile PBS was added, and images were taken by confocal laser scanning microscopy. The captured images were analyzed using ImageJ (National Institutes of Health, Bethesda, MD, USA).
2.5. Measurement of the mRNA Levels of AQP1, Fibrillin 1, and Type I Collagen after AQP1 Depletion by AQP1 siRNA
Collagen contraction was performed in 6-well plates for 2 days using cultured human dermal fibroblasts in which AQP1 was depleted by AQP1 siRNA, as described in
Section 2.1. A QIA shredder (50) (QIAGEN N.V., Venlo, Netherlands) and RNeasy
® Protect Mini Kit (50) (QIAGEN N.V., Venlo, Netherlands) were used for the extraction of RNA from the contracted collagen gel. The extracted RNA was added to 96-well plates, and RT–qPCR reagent (Takara Bio Inc., Shiga, Japan) was added. mRNA quantification was performed with QuantStudio 5 (Thermo Fisher Scientific Inc.) using the relative calibration curve method. AQP1 (QIAGEN N.V.), COL1A2 (QIAGEN N.V.), and FBN1 (QIAGEN N.V.) were used as primers, and ACTB (Thermo Fisher Scientific Inc.) and GAPDH (Thermo Fisher Scientific Inc.) as housekeeping genes.
2.6. Western Blotting of AQP1, Phosphorylated Myosin Light Chain 2, abLIM1, Fibrillin 1, and Type I Collagen after AQP1 Depletion by AQP1 siRNA
After culturing, 300 µL of SDS sample buffer (62.5 mM Tris-HCl (pH 6.8), 2% w/v SDS, 10% glycerol, 50 mM DTT, and 0.01% w/v bromophenol blue) was added and heated at 95 °C for 5 min. Two 4–20% SDS–PAGE plates were applied and electrophoresed at 54 mA for 1.5 h. Transfer was performed at 125 mA using PVDF membranes (Millipore Sigma) by the wet method. The membranes were washed 3 times for 5 min, incubated in blocking buffer (Tris-buffered saline (TBS) with 0.1% Tween-20 (TBS-T) and 5% w/v nonfat dry milk) for 30 min and incubated with primary antibody for 1 h. The primary antibodies used were: anti-AQP1 antibody (1000-fold dilution in TBS-T), anti-phosphomyosin light chain 2 (Ser19) antibody (1000-fold dilution in TBS-T), anti-abLIM1 antibody (1000-fold dilution in TBS-T; Proteintech Group), anti-fibrillin 1 antibody (500-fold dilution in TBS-T; GeneTex, Irvine, CA, USA), anti-type I collagen antibody (2000-fold dilution in TBS-T; Proteintech Group, Inc.), and anti-β-actin mouse antibody (10,000-fold dilution in TBS-T; Proteintech Group, Inc.). After washing with TBS-T, the membranes were incubated with anti-rabbit IgG, HRP, or anti-mouse IgG, HRP (5000-fold dilution; Proteintech Group, Inc.), incubated in TBS-T for 30 min, washed 4 times (2 h) in TBS-T, and immersed in Western Blot Hyper HRP Substrate solution (Takara Biotechnology, Inc., Siga, Japan), and images were recorded by LuminoGraph I (ATTO Corporation, Tokyo, Japan).
2.7. Statistical Analysis
The numerical data were recorded in Excel (Microsoft, Redmond, WA, USA) and the means and standard deviations were calculated. The data shown in the figures were subjected to two-way ANOVA, conducted using BellCurve Excel Statistics (Social Survey Research Information Co., Ltd., Tokyo, Japan). Tukey’s test was used for multiple comparisons, and p < 0.05 was considered to indicate statistical significance.
4. Discussion
In skin, mice deficient in AQP3, which transports both water and glycerol, exhibit dry skin [
19,
20], and the mRNA expression levels of AQP1, AQP3, AQP4, AQP7, and AQP9 in skin are significantly decreased in aging mice [
21]. AQP1 is also highly expressed in dermal fibroblasts of systemic sclerosis lesional skin, and a positive correlation exists between the degree of AQP1 expression and the degree of tissue fibrosis [
22]. It has been reported that AQP1 mRNA expression is decreased by oxidative stress and UVB irradiation in human dermal fibroblasts [
23,
24]. However, there are no reports on what happens to normal dermal fibroblasts after AQP1 is depleted. In this study, AQP1 was found to be highly expressed in human dermal fibroblasts, suggesting that the water permeability of the cell membrane promoted by AQP1 is involved in cell movement. Previous studies have suggested that AQP1 is located at the front end of migrating cells and promotes migration by facilitating turnover of cell membrane protrusions (lamellipodia) [
25]. AQP1 was universally present in the cell periphery in this experiment. In addition, the depletion of AQP1 by AQP1 siRNA reduced AQP1 in the pericellular space. Since the depletion of AQP1 suppressed cell motility, the turnover of lamellipodia in the pericellular area and the influx of water into the cytoplasmic space by AQP1 are thought to be involved in cell motility.
It has also been reported that depletion of abLIM1 decreases the number of stress fibers in NIH3T3 cells, whereas its overexpression increases intracellular F-actin [
18]. The depletion of AQP1 by AQP1 siRNA in cultured human dermal fibroblasts results in reduced motility activity. AbLIM1 co-occurs with actin filaments and promotes actin filament formation. In cultured human dermal fibroblasts grown in medium supplemented with AQP1 siRNA, the staining of anti-abLIM1 antibodies and actin filaments was decreased, suggesting that the depletion of AQP1 reduced the function of abLIM1 and the formation of actin filaments, resulting in the suppression of cell motility. In vitro assays showed that abLIM1 cross-links and binds F-actin, inducing the formation of dense F-actin networks [
14]. The involvement of abLIM1 in the formation of the F-actin network has been previously suggested [
14].
The organization of the cytoskeleton requires the presence of membrane-associated proteins, including the PDZ domain, which is involved in scaffolding [
26]. Proteins containing PDZ domains play an important role in anchoring receptor proteins at the membrane to cytoskeletal components. For example, Lin-7, a PDZ protein, forms a complex with CASK/Lin-2, which interacts with cytoskeletal proteins to retain and organize signaling complexes at the cell membrane and is important for maintaining and organizing signaling complexes at the cell membrane [
27]. The knockdown of AQP1 markedly affects the organization of the actin cytoskeleton through Lin-7/β-catenin interactions [
28]. The loss of AQP1 leads to the destabilization of F-actin reorganization and has been shown to be associated with the formation of a new cellular cytoskeleton [
29], which reportedly results in reduced cell motility and invasion in melanoma and human endothelial cell lines [
28]. Our Gene Chip analysis of human dermal fibroblasts cultured on aminocarbonylated collagen revealed a decrease in LIN7B and AQP1 mRNA, but not LIN7A or CASK/LIN2, compared with the levels in human dermal fibroblasts cultured on non-aminocarbonylated collagen. The expression level of LIN7B was low, and whether the depletion of AQP1 in human dermal fibroblasts markedly affects the organization of the actin cytoskeleton through the Lin-7B/β-catenin interaction remains unclear. Furthermore, no effect of aminocarbonylation was observed on ITGA2 and ITGB1, which are molecules that adhere to collagen.
When human dermal fibroblasts are cultured in reconstituted collagen gel, the collagen gel contracts and becomes flexible. The contracted collagen gel exhibits increased flexibility, elasticity, and strength. It has been reported that increased phosphorylation of myosin light chain 2 in fibroblasts increases the collagen gel contractile activity [
7]. Since AQP1 depletion did not affect the number of cells after five days of culture, it appears that AQP1 depletion, not the cell growth rate, is dependent on the cell’s ability to contract collagen. Cultured human dermal fibroblasts grown in medium supplemented with AQP1 siRNA showed decreased levels of anti-phosphorylated myosin light chain 2 antibody-positive protein and F-actin, suggesting that the depletion of AQP1 reduces the amount of F-actin and the formation of phosphorylated myosin light chain, resulting in suppression of the collagen gel contractive activity of fibroblasts.
Wrinkles and sagging are some of the most common skin problems associated with aging and are caused by degeneration of the extracellular matrix, which makes up most of the dermis [
30]. This extracellular matrix contains elastic fibers and collagen fibers. Fibrillin 1 is one of the components of elastic fibers in the dermis and exhibits a similar distribution to that of elastic fibers but is particularly expressed in oxytalan fibers and micro-fibrils (fine fibers approximately 10 nm in diameter) oriented from the epidermal basement membrane to the lower dermis. Ultraviolet (UV) B (UVB) and UVA-II reduce the antioxidant function, inducing the formation of aging cross-links in collagen and the aminocarbonylation of proteins [
9]. UV-absorbing molecules (chromophores) present in the skin are involved in the formation of UV-induced aging cross-links. For example, UV radiation absorbed by the collagen protein tyrosine forms a photoaging cross-link called di-tyrosine, which stiffens collagen [
31,
32] and facilitates wrinkle formation. The half-life of collagen turnover in skin is as long as 14.8 years [
33], and when collagen fibers are damaged by UV light, the damaged collagen fibers remain in the dermis for a long time. Since collagen is a protein with a slow metabolic turnover, long-term exposure to sunlight causes accumulation of damage to collagen, resulting in a loss of elasticity. In contrast, aminocarbonylation modifies proteins with aldehydes produced by oxidative reactions of lipids and sugars to produce aminocarbonylated proteins. Aminocarbonylation is caused by external influences such as ultraviolet radiation, the decrease in antioxidants in the skin caused by aging, the formation of lipid peroxides from sebum, and oxidative reactions of sugars. Aminocarbonylation of the dermis causes a decrease in transparency, and aminocarbonylation of the basement membrane affects epidermal keratinization and reduces the moisture retention and barrier function of the stratum corneum [
9].
Cultured human dermal fibroblasts depleted of AQP1 by the addition of AQP1 siRNA show decreased mRNA and protein levels of type I collagen and fibrillin 1, which suggests that AQP1 depletion causes decreases in the production of type I collagen and fibrillin 1 in cultured human dermal fibroblasts. In fibroblasts, water molecules are essential for activities such as the production of the intercellular matrix.