1. Introduction
In the last two decades, due to some special advantageous agronomic traits, i.e., wide adaptability, tillering ability, abiotic stress tolerance, and high biomass, the growing area of spelt wheat increased year by year [
1,
2,
3,
4]. In the organic farming system, spelt wheat is an attractive species because of the above-mentioned traits. Spelt is a competitive plant species against weeds due to their high tillering ability. Spelt has good adaptation to unfavourable soil conditions with low inputs. Furthermore, the interest in spelt wheat is increasing in human consumption because of the numerous benefits such as high content of protein, minerals (Zn, Cu, Fe), and other bioactive compounds such as dietary fibres, phenolic compounds, phytosterols, and vitamins [
3,
5,
6,
7,
8,
9,
10].
Spelt wheat is also grown in the marginal regions of wheat growing area. Implicitly, the capacity of spelt breeding was mitigated in comparison with bread wheat programs in the last period. So, there are many challenges (improvement of lodging resistance, fragile spike, earliness, and yield improvement) in the growing and breeding of spelt wheat to increase the economy of cultivation and produce marketable products [
2,
4,
11].
Recently, many modern approaches exist for breeders which can reduce the long process of breeding and increase the efficiency of breeding programs. The doubled haploid (DH) plant production belongs to these modern biotechnology methods of plant breeding [
12,
13,
14,
15,
16,
17]. The main advantage of DH plant production methods is the development of completely homozygous lines in one generation, while in conventional breeding programs the development of homozygous lines requires more generations. Recessive alleles can be identified and fixed using DH methods in early steps of the breeding process. The DH plant production methods can be combined with other breeding strategies such as mutation or transgenic technologies [
18,
19].
Homogeneity is one of the essential requirements in the breeding of varieties and hybrids. Homozygous lines can be produced within one generation using biotechnological methods. Well-established DH plant production methods are applicable for breeding and research of some crop plants, for example: Barley, wheat, triticale, maize, and rice [
12,
13,
14,
15]. In spite of these benefits, only a few published data can be found in connection with DH plant production of spelt wheat [
20,
21,
22,
23,
24].
In crop plants, there are three frequently applied DH plant production methods, namely chromosome elimination, anther culture, and isolated microspore culture. In haploid induction of spelt wheat, the chromosome elimination was reported by Escarnot et al. in 2014 [
21]. However, because of low efficiency (16.1 embryos/100 pollinated florets and 38 plantlets/100 embryos) this method has not been applied for practical breeding, yet. The isolated microspore culture method is an effective and time-saving method, for example in barley and rapeseed [
13,
25,
26,
27]. This method was also tested with four spelt wheat genotypes but the albinism hindered the efficiency of green plant regeneration, the method required further improvements [
23], yet. Anther culture was mentioned at first by Schmid in 1990 [
20], the average of anther culture-derived plantlets was 0.9 plants/100 anthers in that experiment. Takács et al. [
28] also reported the induction of in vitro androgenesis in anther culture of a single genotype (the number of responsive anthers was 6.4%). Unfortunately, these promising results were inadequate for practical breeding programs.
Recently, the anther culture has proven to be an efficient method via four spelt genotypes (‘Franckenkorn’, ‘GK Fehér’, ‘Mv Martongold’, ‘Oberkulmer Rotkorn’), the green plantlets production ranged from 20.93 to 83.08 green plantlets/100 anthers depending on genotype [
23]. Some Spanish and Central European spelt genotypes were also tested in anther culture; the green plant production (1.8–15.6 green plants/100 anthers) was influenced by genotype [
24]. However, a high number of albinos was regenerated from the anther culture-derived embryo-like structures (ELS) of these genotypes, the phenomenon of albinism limited the efficiency of anther culture [
24].
In this study, our purposes were to screen the responsivity of a range of spelt genotypes in anther culture and verify the efficient application of DH plant production in the breeding procedure of this species. A diallel population of four spelt wheat genotypes and ten breeding targeted F1 hybrids was involved in the experiments. The data of the produced ELS, green-, and albino plantlets was collected and analysed. The percentage of spontaneous rediploidization was calculated based on the seed production of anther culture-derived plants of ten F1 hybrids. The agronomic values (heading date, plant height, yield, hardness, width and length of seed, TKW, hulling yield, milling yield, protein- and wet gluten content) of selected seven DH lines were monitored based on data of field experiment in two consecutive years.
3. Discussion
Although the methods of plant biotechnology play a key role in modern plant breeding, a few published data are available in connection with in vitro androgenesis of spelt wheat especially from the viewpoint of practical breeding. A full diallel crossing program was carried out with the four varieties (‘Franckenkorn’, ’GK Fehér’, ‘Mv. Martongold’, and ‘Oberkulmer Rotkorn’). Furthermore, ten breeding targeted F
1 genotypes were involved in our research and breeding program. In F
1 generation of twenty-two spelt wheat combinations, in vitro anther culture method was tested to produce genetically pure lines for spelt breeding program [
22,
23,
29].
In monocots, some relevant publications reported the genotype dependency and albinism as a bottlenecks of in vitro androgenesis which prohibited the practical application of anther culture in the breeding of more cereal species [
12,
15,
24,
30,
31,
32,
33,
34]. At the early period of in vitro androgenesis research, the published protocols were not effective for practical spelt breeding programs [
20,
28]. Recently, anther culture methods have been published as an efficient tool for DH plant production in some spelt genotypes [
23,
24]. However, the phenomenon of albinism was also mentioned as a limiting factor of anther culture in some experiments [
23].
The genotype influenced significantly the efficiency of anther culture in common wheat [
35,
36,
37], and the genotype effect was also published in anther culture of spelt wheat genotypes [
20,
23,
24]. Both reciprocal and nuclear genetic effects were observed in anther culture of common wheat [
37]. However, GCA effects were more determinative than the SCA effects for the anther culture parameters [
37]. According to relevant publications, the inheritance of anther culture response is determined dominantly by additive genetic effects in common wheat [
37,
38]. In the present in vitro experiments, a full diallel crossing program and ten F
1 hybrids were tested in vitro anther culture to clarify the efficiency of this method with a range of spelt genotypes. In vitro androgenesis was induced in each of the tested genotypes, although the genotype influenced significantly the efficiency of the method. In the full diallel population, high number of in vitro green plantlets was produced while the number of albinos was limited. The highest green plantlets production (65.00 green plantlets/100 anthers) was achieved by ‘Franckenkorn’ genotype among the parents similarly to our previous results [
23], while ‘Franckenkorn/Martongold’ hybrid produced 85.00 in vitro green plantlets/100 anthers. Based on the statistical analyses, most of the genotypic variance was due to GCA effects; consequently additive genetic variance was a primary contributor to the observed data. Similar phenomenon was reported in common wheat [
37,
38]. This observation prohibits the practical application of the anther culture in spelt wheat breeding and research.
The ten breeding targeted hybrids produced different quantity green plants depending on genotype. In the nursery, 436 fertile DH lines were identified among the 1535 transplanted plants. The percentage of spontaneous rediploidization was 28.4% which was also influenced by genotype (9.76–54.24%). In our previous experiment, the percentage of spontaneous DH plants was 24.27% (11.8–44.44%) based on data of four genotypes [
23]. These values (15–80%) were also influenced by genotype in an anther culture of Spanish and Central European spelt wheat genotypes [
24]. In contrast with some critical reviews [
12,
15,
24,
30,
31,
32,
33,
34], the anther culture was an efficient method for the tested spelt genotypes.
‘Tonkoly.pop1’ advanced line and its seven different DH sister lines were compared in the two-year field experiment. First of all, the spelt wheat DH lines showed uniform performance in the field which is a critical viewpoint in breeding. The DH lines showed competitive values based on their 11 measured parameters (heading date, plant height, yield, hardness, width and length of seed, TKW, hulling yield, flour yield, protein content, wet gluten content) in comparison with the control. In the case of several traits of DH lines, the genotype influenced significantly the measured parameters in both years. Genetically independent DH lines were separated from the advanced line. So, these data emphasized the practical application of DH method in spelt breeding.
4. Materials and Methods
4.1. Plant Materials
Four winter type spelt varieties were selected for a full diallel analysis, these genotypes are popular and cultivated varieties in Hungary. ‘GK Fehér’ was released in 2017 by us at the Cereal Research Non-Profit Ltd., while the seeds of other varieties—‘Franckenkorn’, ‘Mv Martongold’, and ‘Oberkulmer Rotkorn’—were supplied to us by the Agricultural Institute, Centre for Agricultural Research, Hungarian Academy of Sciences, Martonvásár, Hungary. A full diallel population (four parents and their 12 hybrids) was generated by crossing of the four spelt varieties. The parents and their F
1 hybrids were involved in the in vitro experiments. Furthermore, ten breeding targeted F
1 combinations were also tested in vitro anther culture (
Table 13). The parents of the F
1 combinations were cultivated varieties (‘Franckenkorn’, ‘GK Fehér’, ‘Lajta’, ‘Martongold’, ‘Oberkulmer Rotkorn’) in Hungary, advanced lines (‘Aus’, ‘Bartucz’) or germplasms from Hungarian national gene bank (Center for Plant Diversity’s, Tápiószele: RCAT056296, RCAT058694, RCAT060960).
The donor plants of each genotype were grown in the greenhouse at Cereal Research Non-Profit Ltd., Szeged, Hungary. The vernalized plants were transplanted into 2 l plastic pots which contained a 1:1 peat and sandy soil mix. Volldünger chemical fertilizer (N:P:K:Mg = 14:7:21:1, plus 1% microelements: B, Cu, Fe, Mn, and Zn; produced by Magyar Kwizda Ltd., Budapest, Hungary) were used for fertilizing of the plants once in a fortnight. In the growing period, 20/15 °C day/night temperature were adjusted for plants, respectively. Natural light was supplemented with 3 h artificial light until the collection of donor tillers. For proper plant growth, required fertilizers and fungicides were applied and weeds were removed manually.
4.2. Preparation of Anther Cultures
The donor tillers were collected when the microspores were in early- and mid-uninucleate stages. The developmental stages of microspores were checked by Olympus CK-2 inverted microscope (Olympus Ltd., Southend-on-Sea, UK). The collected donor tillers were placed into Erlenmeyer flasks containing tap water and covered by PVC bags to keep high humidity. The collected donor tillers were cold pre-treated at 3–4 °C for 14 days. After the cold pre-treatment, the spikes of the selected genotypes were sterilized in 300 ml 2% NaOCl solution with one drop Tween-80 for 20 min on a shaker. The spikes were rinsed three times with distilled water (Millipore Elix 5) in laminar air flow.
From the prepared spikes, 300 anthers were isolated in each 90 mm diameter glass Petri dishes containing 12 ml ‘W14mf’ induction medium [
39,
40]. On the first three days of culture, the Petri dish were incubated at 32 °C to apply heat shock treatment. The anther cultures were kept at 28 °C for eight weeks in a dark thermostat.
4.3. Plant Regeneration and Acclimatization of Anther Culture-Derived Green Plants
The well-developed ELS with a size of 1–2 mm was transferred into 90 mm diameter plastic Petri dishes (Sarstedt, Newton, MA, USA) which contained the 190–2Cu medium [
29]. The ELS regenerated green and albino plantlets on the regeneration medium. The albino plantlets were discarded while the green plantlets with two-three leaves were transferred into individual glass tubes which contained the ‘190–3Cu’ regeneration medium for rooting [
23].
The well-rooted green plantlets were transferred into the greenhouse. The plantlets were transplanted into plastic plates (66 plantlets/plate) which contained the above mentioned 1:1 soil mix. The plantlets were covered by transparent plastic cover during the 3–4 day-long acclimatization period. The acclimatized plants were grown in the greenhouse following the above-mentioned growing protocol for donor plants in the greenhouse.
4.4. Growing of Anther Culture-Derived Plants in DH Nursery
The acclimatized anther culture-derived plants of the ten F1 hybrids were transplanted manually into the DH nursery in October 2018. The transplanted plantlets were irrigated as needed to support the development of roots and acclimatization of the plantlets to the field conditions. The seeds of the spontaneous DH plants were harvested from the fertile plants in July 2019.
4.5. Field Study and Evaluation of Spelt Wheat DH Lines
In preliminary experiments, DH lines of ‘Tonkoly.pop1’ advanced line were produced by anther culture. These DH lines were integrated into our breeding program. After DH1 generation, seven different individual DH lines of ‘Tonkoly.pop1’ were selected based on their phenotypic and agronomic data (data not shown). These selected seven DH lines along with the control (‘Tonkoly.pop1’ advanced line) were shown in our spelt wheat nursery (40 × 1m plots each) in two consecutive years (2017/2018 and 2018/2019). These DH lines and the control were characterized by some agronomic and grain quality parameters (heading data, plant height, yield, hardness, width and length of seeds, thousand kernel weight (TKW), hulling yield%, flour yield%, wet gluten content) based on the collected data.
Kernel hardness, width, and TKW parameters were measured with a PERTEN SKCS 3100 (Perten Instruments, Sweden) according to the Approved Method [
41]. Kernel length was measured with calipers. Protein and wet gluten content were detected by NIR (Mininfra SmarT, Infracont, Hungary). Samples were dehulled with Spelt Huller (Kapacitív Kkt., Hungary), hulling yield was calculated. Dehulled grains were conditioned to 14% moisture content overnight and milled by Brabender Quadromat Senior Mill (Brabender GmbH & Co., Germany) to pass through a 250 µm screen, flour yield was calculated.
4.6. Statistical Analyses
Our in vitro experiments were repeated at least three times, minimum 3 × 300 anthers were tested in each treatment. The three important parameters of in vitro androgenesis (number of ELS, in vitro green-, and albino plantlets) were collected and analysed by one-way ANOVA. The data of diallel population were used to determine combining abilities (GCA and SCA) and clarify the reciprocal and nuclear genetic effects in anther culture of spelt genotypes. GCA and SCA and reciprocal effects were analysed using Griffing’s (1956) method 1, model 1 [
42]. The percentage of spontaneous rediploidization was calculated based on seed production of anther culture-derived plants of ten F
1 hybrids. In the field experiment, the measured data of seven DH lines and ‘Tonkoly.pop1’ advanced line were analysed by two-way ANOVA without repetition.
The statistical analyses were carried out using Microsoft Excel 2013 statistical software developed by Microsoft Ltd. (Redmond, WA, USA) and the statistical program SPSS (SPSS Hungary 1115 Budapest Bartók Béla Street 105–113).