Testing and Application of Geospatial Techniques in Seismic Engineering †
Abstract
:1. Introduction
- The possibility of experiencing a natural or anthropogenic threat (hazard) in a region.
- The elements exposed to the hazard.
- The vulnerability of the exposed elements.
2. Hypothesis
3. Methodology and Objectives
- Treatment of the collected point clouds for subsequent exploitation.
- Algorithm development for automatic 3D modelling.
4. Usefulness of the Research
- It will constitute a new methodological development that will strengthen the line of research in seismic engineering of GIIS (UPM.
- The results will be published and presented in congresses, increasing the dissemination of the group in a scientific environment.
- Research will be strengthened using geospatial technologies. These technologies are directly related to the University degrees.
References
- Arroyo, A.L.; Berenguer, J.V. Metodología Simplificada para el Análisis del Riesgo Sísmico. Física la Tierra 1999, 11, 269–284. [Google Scholar]
- Office of the United Nations Disaster Relief Co-ordinator. Natural Disasters and Vulnerability Analysis; Office of the United Nations Disaster Relief Co-Ordinator: Geneva, Switzerland, 1979; p. 60. [Google Scholar]
- Marin, C.; Bovolo, F.; Bruzzone, L. Building change detection in multitemporal very high resolution SAR images. IEEE Trans. Geosci. Remote Sens. 2015, 53, 2664–2682. [Google Scholar] [CrossRef]
- Gómez, T.H. Detección automática de Edificios y Clasificación de usos del suelo en entornos urbanos con imágenes de alta resolución y datos LiDAR; Universitat Politècnica de València: Valencia, Spain, 2011. [Google Scholar]
- Wieland, M. Exposure Estimation for Rapid Seismic Vulnerability Assessment: An Integrated Approach Based on Multi-Source Imaging; Technischen Universität Berlin: Berlin, Germany, 2013. [Google Scholar]
- Joyce, E.; Belliss, S.E.; Samsonov, S.V.; McNeill, S.J.; Glassey, P.J. A review of the status of satellite remote sensing and image processing techniques for mapping natural hazards and disasters. Prog. Phys. Geogr. 2009, 33, 183–207. [Google Scholar] [CrossRef]
- Eguchi, R.; Foulser-Piggott, D.M.B.R.; Spence, R.; Saito, K. The use of remote sensing for post-earthquake damage assessment: Lessons from recent events, and future prospects. In Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, 24–28 September 2012. [Google Scholar]
- Dell’Acqua, F.; Bignami, C.; Chini, M.; Lisini, G.; Polli, D.A.; Stramondo, S. Earthquake Damages Rapid Mapping by Satellite Remote Sensing Data: L’Aquila April 6th, 2009 Event. IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens. 2011, 4, 935–943. [Google Scholar] [CrossRef]
- Chen, K.; Lu, W.; Xue, F.; Tang, P.; Li, L.H. Automatic building information model reconstruction in high-density urban areas: Augmenting multi-source data with architectural knowledge. Autom. Constr. 2018, 93, 22–34. [Google Scholar] [CrossRef]
- Pətrəucean, V.; Armeni, I.; Nahangi, M.; Yeung, J.; Brilakis, I.; Haas, C. State of research in automatic as-built modelling. Adv. Eng. Inform. 2015, 29, 162–171. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Romero-Jarén, R.; Benito, B.; Arranz, J.J. Testing and Application of Geospatial Techniques in Seismic Engineering. Proceedings 2019, 19, 23. https://doi.org/10.3390/proceedings2019019023
Romero-Jarén R, Benito B, Arranz JJ. Testing and Application of Geospatial Techniques in Seismic Engineering. Proceedings. 2019; 19(1):23. https://doi.org/10.3390/proceedings2019019023
Chicago/Turabian StyleRomero-Jarén, Rocío, Belén Benito, and José Juan Arranz. 2019. "Testing and Application of Geospatial Techniques in Seismic Engineering" Proceedings 19, no. 1: 23. https://doi.org/10.3390/proceedings2019019023
APA StyleRomero-Jarén, R., Benito, B., & Arranz, J. J. (2019). Testing and Application of Geospatial Techniques in Seismic Engineering. Proceedings, 19(1), 23. https://doi.org/10.3390/proceedings2019019023