Sustain. Chem., Volume 2, Issue 3 (September 2021) – 8 articles

Neodymium (Nd) is one of the most essential rare-earth metals due to its outstanding properties and crucial role in green energy technologies such as wind turbines and electric vehicles. Some of the key uses includes permanent magnets present in technological applications such as mobile phones and hard disk drives, and in nickel metal hydride batteries. Nd demand is continually growing, but reserves are severely limited, which has put its continued availability at risk. Nd recovery from end-of-life products is one of the most interesting ways to tackle the availability challenge. This perspective concentrates on the different methods to recover Nd from permanent magnets and rechargeable batteries, covering the most developed processes, hydrometallurgy and pyrometallurgy, and with a special focus on electrodeposition using highly electrochemical stable media (e.g., ionic liquids). Among all the ionic liquid chemistries, only phosphonium ionic liquids have been studied in-depth, exploring the impact of temperature, electrodeposition potential, salt concentration, additives (e.g., water) and solvation on the electrodeposition quality and quantity. Finally, the importance of investigating new ionic liquid chemistries, as well as the effect of other metal impurities in the ionic liquid on the deposit composition or the stability of the ionic liquids are discussed. This points to important directions for future work in the field to achieve the important goal of efficient and selective Nd recovery to overcome the increasingly critical supply problems. Full article

The concomitant hydrolysis and dehydration of biomass-derived cellulose and hemicellulose to furfural (FUR) and 5-(hydroxymethyl)furfural (HMF) under acid catalysis allows a dramatic reduction in the oxygen content of the parent sugar molecules with a 100% carbon economy. However, most applications of FUR or HMF necessitate synthetic modifications. Catalytic hydrogenation and hydrogenolysis have been recognized as efficient strategies for the selective deoxygenation and energy densification of biomass-derived furfurals generating water as the sole byproduct. Efficient and eco-friendly catalysts have been developed for the selective hydrogenation of furfurals affording renewable furanic compounds such as 2-methylfuran, 2,5-dimethylfuran and 2-methyltetrahydrofuran with potential applications as biofuel, solvent and chemical feedstock. Hydrogen gas or hydrogen donor molecules, required for the above processes, can also be renewably obtained from biomass using catalytic processes, enabling a circular economy. In this review, the recent developments in the energy densification of furfurals to furanic compounds of commercial significance are elaborated, emphasizing the role of catalyst and the reaction parameters employed. Critical discussion on sourcing hydrogen gas required for the processes, using hydrogen donor solvents, catalyst design and the potential markets of furanic intermediates have been made. Critical evaluations of the accomplishments and challenges in this field are also provided. Full article

Herein, an inexpensive commercially available sensor is presented for the detection of 4-nitrophenol (4NP) pollutant. Sodium fluorescein (NaFl) is used as a sensor to detect trace amounts of 4NP in acetonitrile (MeCN). The photophysical properties of NaFl were studied in two different solvents, MeCN (aprotic) and water (protic), with varying concentrations of different nitroaromatics using UV-visible absorption and fluorescence spectrophotometry. In an aqueous medium, photophysical properties of NaFl did not change in the presence of nitroaromatics. However, examination of the photodynamics in MeCN demonstrated that NaFl is extremely sensitive to 4NP (limit of detection: 0.29 µg/mL). This extreme specificity of NaFl towards 4NP when dissolved in MeCN, as compared to other nitroaromatics, is attributed to hydrogen bonding of 4NP with NaFl in the absence of water, resulting in both static and dynamic quenching processes. Thus, NaFl is demonstrated as a simple, inexpensive, sensitive, and robust optical turn off sensor for 4NP. Full article

Commercially available Purolite CT151 demonstrated to be an efficient acid catalyst for the synthesis of alkyl levulinates via alcoholysis of furfuryl alcohol (FA) at mild temperatures (80–120 °C) and short reaction time (5 h). Reaction conditions were first optimized for the synthesis of ethyl levulinate and then tested for the preparation of methyl-, propyl-, isopropyl-, butyl, sec-butyl- and allyl levulinate. Preliminary scale-up tests were carried out for most of the alkyl levulinates (starting from 5.0 g of FA) and the resulting products were isolated as pure by distillation in good yields (up to 63%). Furthermore, recycling experiments, conducted for the preparation of ethyl levulinate, showed that both the Purolite CT151 and the exceeding ethanol can be recovered and reused for four consecutive runs without any noticeable loss in the catalyst activity. Full article

Polymers are essential materials in our daily life. The synthesis of value-added polymers is mainly performed from fossil fuel-derived monomers. However, the adoption of the circular economy model based on the bioeconomy will reduce the dependence on fossil fuels. In this context, biorefineries have emerged to convert biomass into bioenergy and produce high value-added products, including molecules that can be further used as building blocks for the synthesis of biopolymers and bioplastics. The achievement of catalytic systems able to polymerize the natural monomer counterparts, such as terpenes or terpenoids, is still a challenge in the development of polymers with good mechanical, thermal, and chemical properties. This review describes the most common types of bioplastics and biopolymers and focuses specifically on the polymerization of terpenes and terpenoids, which represent a source of promising monomers to create bio-based polymers and copolymers. Full article

By tradition, herbal infusions have been mainly consumed for their pleasant taste, but, nowadays, the consumer, along with the pleasantness of drinking a savory beverage, also looks for their health benefits. Grapes and grape/wine by-products are a rich source of health-promoting compounds, presenting great potential for the development of new beverages. Moreover, grape-infusion preparation is no more than a sustainable or green way of extracting polyphenols and other nutraceutical compounds from grapes and grape leaves. In this review, we summarize the benefits of drinking grape infusions and discuss the sustainable processes of extracting potential nutraceutical compounds from grapes and grape by-products, which are often considered fermentation waste and are discarded to the environment without proper treatment. Full article

The pressing concerns of environmental sustainability and growing needs of clean energy have raised the demands of carbon and organic based energy storage materials to a higher level. Redox-active organic-carbon composites electrodes are emerging to be enablers for high-performance, high power and long-lasting energy storage solutions, especially for electrochemical capacitors (EC). This review discusses the electrochemical redox active organic compounds and their composites with various carbonaceous materials focusing on capacitive performance. Starting with the most common conducting polymers, we expand the scope to other emerging redox active molecules, compounds and polymers as well as common carbonaceous substrates in composite electrodes, including graphene, carbon nanotube and activated carbon. We then discuss the first-principles computational studies pertaining to the interactions between the components in the composites. The fabrication methodologies for the composites with thin organic coatings are presented with their merits and shortcomings. The capacitive performances and features of the redox active organic-carbon composite electrodes are then summarized. Finally, we offer some perspectives and future directions to achieve a fundamental understanding and to better design organic-carbon composite electrodes for ECs. Full article

2,2,5,5-tetramethyloxolane (TMO) has recently been identified and demonstrated as a safer solvent to replace toluene, THF, and hydrocarbons in a handful of applications. Herein, several bio-based routes to TMO are presented and assessed for greenness, assisted by the CHEM21 Metrics Toolkit and BioLogicTool plots. Using glucose as a common starting point, two chemocatalytic routes and two biochemical routes to TMO were identified and the pathways compared using the aforementioned tools. In addition, bio-based TMO was synthesised via one of these routes; from methyl levulinate supplied by Avantium, a by-product of the sugar dehydration step during the production of 2,5-furandicarboxylic acid. First, methyl levulinate underwent triple methylation using methyl magnesium chloride (MeMgCl) to yield 2,5-dimethylhexane-2,5-diol (DHL) in high yields of 89.7%. Then DHL was converted to high purity TMO (>98.5%) by cyclodehydration using H-BEA zeolites based on the previously reported approach. Bio-based content of this TMO was confirmed by ASTM D6866-20 Method B and found to have 64% bio-based carbon, well above the threshold of 25% set by CEN/TC 411 standards and matching the anticipated content. This study represents the first demonstration of a bio-based synthesis of TMO and confirmation of bio-content by accepted standards. Full article