Next Article in Journal
Study and Characterization of Phase Change Material-Recycled Paperboard Composite for Thermoregulated Packaging Applications
Previous Article in Journal
Effect of Carbon Nanotubes (CNTs) on Chloride Penetration Resistance and Physical-Mechanical Properties of Cementitious Materials
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Abstract

Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine †

by
Andrey S. Gnedenkov
1,*,
Sviatlana V. Lamaka
2,
Sergey L. Sinebryukhov
1,
Valeriia S. Filonina
1,
Mikhail L. Zheludkevich
2 and
Sergey V. Gnedenkov
1
1
Institute of Chemistry, Far Eastern Branch of the Russian Academy of Sciences, 690022 Vladivostok, Russia
2
Institute of Surface Science, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany
*
Author to whom correspondence should be addressed.
Presented at the First Corrosion and Materials Degradation Web Conference, 17–19 May 2021; Available online: https://cmdwc2021.sciforum.net/.
Mater. Proc. 2021, 6(1), 22; https://doi.org/10.3390/CMDWC2021-09951
Published: 8 May 2021
(This article belongs to the Proceedings of The 1st Corrosion and Materials Degradation Web Conference)

Abstract

:
Magnesium is very light metal which possesses many useful properties, such as a high strength to weight ratio and good electrical and thermal conductivity. Magnesium and its alloys can be used in implant surgery as biodegradable materials. Taking into account the rapid degradation process of Mg alloys in chloride-containing solutions and the very complex composition of human body media, it is worthwhile to study the mechanism and kinetics of Mg alloy corrosion in solutions which closely resemble those of human body fluids. A comparative analysis of the corrosion activity of MA8 magnesium alloy (intended to be a bioresorbable material) in a medium for the cultivation of mammalian cells (minimum essential medium, MEM) and 0.83% NaCl solution was performed using the scanning vibrating electrode technique; local pH measurements; hydrogen evolution tests; and OCP, PDP, and EIS tests. Corrosion products formed on the alloy surface were characterized using XRD, SEM-EDX analysis and Raman spectroscopy. The hydrogen evolution rate was higher for samples in NaCl solution compared with MEM. The impedance modulus in the frequency range from 105 Hz down to 10−1 Hz for the sample immersed in MEM was higher than that for the sample immersed in NaCl. This indicates higher protective ability of the corrosion film formed in MEM compared to that formed during immersion in NaCl solution. Ca- and P-rich deposits were formed in the corrosion layer. The model of corrosion mechanism of MA8 magnesium alloy in MEM, which includes three stages of the development of corrosion product film, is hereby proposed. The corrosion product layer formation on the surface of the magnesium alloy sample in MEM), which included magnesium-substituted hydroxyapatite, stabilized the local pH below 9.0 and, along with the organic acids, did not allow the pH to increase during the corrosion of the Mg alloy. The obtained results indicate the prospect of using bioresorbable magnesium in implant surgery [1,2].

Supplementary Materials

The conference presentation file is available at https://www.mdpi.com/article/10.3390/CMDWC2021-09951/s1.

Funding

This work was funded by the Grant of Russian Science Foundation, Russia (project no. 21-73-10148).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data sharing is not applicable to this article.

References

  1. Gnedenkov, A.S.; Mei, D.; Lamaka, S.V.; Sinebryukhov, S.L.; Mashtalyar, D.V.; Vyaliy, I.E.; Zheludkevich, M.L.; Gnedenkov, S.V. Localized currents and pH distribution studied during corrosion of MA8 Mg alloy in the cell culture medium. Corros. Sci. 2020, 170, 108689. [Google Scholar] [CrossRef]
  2. Gnedenkov, A.S.; Lamaka, S.V.; Sinebryukhov, S.L.; Mashtalyar, D.V.; Egorkin, V.S.; Imshinetskiy, I.M.; Zavidnaya, A.G.; Zheludkevich, M.L.; Gnedenkov, S.V. Electrochemical behaviour of the MA8 Mg alloy in minimum essential medium. Corros. Sci. 2020, 168, 108552. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Gnedenkov, A.S.; Lamaka, S.V.; Sinebryukhov, S.L.; Filonina, V.S.; Zheludkevich, M.L.; Gnedenkov, S.V. Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine. Mater. Proc. 2021, 6, 22. https://doi.org/10.3390/CMDWC2021-09951

AMA Style

Gnedenkov AS, Lamaka SV, Sinebryukhov SL, Filonina VS, Zheludkevich ML, Gnedenkov SV. Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine. Materials Proceedings. 2021; 6(1):22. https://doi.org/10.3390/CMDWC2021-09951

Chicago/Turabian Style

Gnedenkov, Andrey S., Sviatlana V. Lamaka, Sergey L. Sinebryukhov, Valeriia S. Filonina, Mikhail L. Zheludkevich, and Sergey V. Gnedenkov. 2021. "Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine" Materials Proceedings 6, no. 1: 22. https://doi.org/10.3390/CMDWC2021-09951

APA Style

Gnedenkov, A. S., Lamaka, S. V., Sinebryukhov, S. L., Filonina, V. S., Zheludkevich, M. L., & Gnedenkov, S. V. (2021). Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine. Materials Proceedings, 6(1), 22. https://doi.org/10.3390/CMDWC2021-09951

Article Metrics

Back to TopTop