Polymers

2024

Jump to: 2023, 2022, 2021

18 pages, 7478 KiB

Open AccessArticle

Improvement of Geotechnical Properties of Clayey Soil Using Biopolymer and Ferrochromium Slag Additives

by Mustafa Yasin Çetin, Baki Bağrıaçık, Hatice Merve Annagür and Szymon Topoliński

Polymers 2024, 16(10), 1306; https://doi.org/10.3390/polym16101306 - 7 May 2024

Viewed by 1070

Abstract

The geotechnical properties of clay soil and its mixtures with different proportions (0.75%, 0.85%, 1%, and 1.15%) of Agar Gum biopolymer and Ferrochromium Slag (0.25%, 0.50%, 0.75%, and 1%), having various curing times and freeze-thaw cycles, were studied through a series of soil [...] Read more.

The geotechnical properties of clay soil and its mixtures with different proportions (0.75%, 0.85%, 1%, and 1.15%) of Agar Gum biopolymer and Ferrochromium Slag (0.25%, 0.50%, 0.75%, and 1%), having various curing times and freeze-thaw cycles, were studied through a series of soil mechanical tests to investigate possibilities to improve its undesired/problematic plasticity, compaction, and shear strength characteristics. The results revealed that treatment with an optimal ratio of 1% Agar Gum and 1% Ferrochromium Slag alone, as well as together with, improved the geotechnical properties of the clay soil considerably. Both the unconfined and shear strength properties, along with the cohesion and internal friction angle, increased as much as 47 to 173%, depending on the curing time. The higher the curing time, the higher the shear strength, cohesion, and internal friction angle are up to 21 days. Deteriorating the soil structure and/or fabric, freeze-thaw cycles, however, seem to have an adverse effect on the strength. The higher the freeze-thaw cycle, the lower the shear strength, cohesion, and internal friction angle. Also, some improvements in the plasticity and compaction properties were determined, and environmental concerns regarding Ferrochromium Slag usage have been addressed. Full article

► Show Figures

Figure 1

2023

Jump to: 2024, 2022, 2021

24 pages, 6322 KiB

Open AccessArticle

Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

by Priyanka Main, Sandra Petersmann, Nadine Wild, Michael Feuchter, Ivica Duretek, Mariya Edeleva, Peter Ragaert, Ludwig Cardon and Thomas Lucyshyn

Polymers 2023, 15(20), 4126; https://doi.org/10.3390/polym15204126 - 18 Oct 2023

Cited by 8 | Viewed by 1876

Abstract

Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable [...] Read more.

Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable in nature with promising properties and varied applications in the market. This study focuses on their potential for mechanical recycling by multiple extrusion cycles (E1–E5) and multi-faceted characterization of the virgin (V) and reprocessed materials from E1 to E5. The behavior is compared to polypropylene (PP) as a reference with a similar property profile, which has also been reprocessed five times. The thermal properties of both series showed a stable melting point and thermal decomposition temperature from thermal analyses (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). However, a steady increase in the degree of crystallinity was observed which could counterbalance the decrease in molecular weight due to repeated extrusion measured by gel permeation chromatography and resulted in similar values of tensile strength across the cycles. The strain at break was impacted after the first extrusion, but no significant change was observed thereafter; the same was observed for impact strength. Even in scanning electron microscopy (SEM) images, virgin and E5 samples appeared similar, showing the stability of morphological characteristics. Fourier transform infrared spectroscopy (FTIR) results revealed that no new groups are being formed even on repeated processing. The deviation between the PHB and PP series was more predominant in the melt mass flow rate (MFR) and rheology studies. There was a drastic drop in the MFR values in PHB from virgin to E5, whereas not much difference was observed for PP throughout the cycles. This observation was corroborated by frequency sweeps conducted with the parallel plate method. The viscosity dropped from virgin to E1 and E2, but from E3 to E5 it presented similar values. This was in contrast to PP, where all the samples from virgin to E5 had the same values of viscosity. This paper highlights the possibilities of mechanical recycling of PHB and explains why future work with the addition of virgin material and other additives is an area to be explored. Full article

► Show Figures

Graphical abstract

13 pages, 2932 KiB

Open AccessArticle

Zein as a Basis of Recyclable Injection Moulded Materials: Effect of Formulation and Processing Conditions

by Fahimeh Alsadat-Seyedbokaei, Manuel Felix and Carlos Bengoechea

Polymers 2023, 15(18), 3841; https://doi.org/10.3390/polym15183841 - 21 Sep 2023

Cited by 2 | Viewed by 1293

Abstract

The growing concern about reducing carbon footprint has led to the progressive replacement of traditional polymeric materials by natural-based biodegradable materials. However, materials from natural sources (i.e., plants) typically possess poorer mechanical properties when compared to conventional plastics. To counterbalance this, they need [...] Read more.

The growing concern about reducing carbon footprint has led to the progressive replacement of traditional polymeric materials by natural-based biodegradable materials. However, materials from natural sources (i.e., plants) typically possess poorer mechanical properties when compared to conventional plastics. To counterbalance this, they need to be adequately formulated and processed to eventually meet the standards for certain applications. Zein is the major storage protein from corn and can be obtained as a by-product from the corn-oil industry. It is an excellent candidate for producing green materials due to its stability, biodegradability, renewability, and suitable mechanical and technical-functional properties. In the present work, zein was blended with a plasticizer (i.e., glycerol) at three different zein/glycerol ratios (75/25, 70/30, and 65/25) and then injection moulded at three different processing temperatures (120, 150, and 190 °C). The properties of both blends and bioplastics were evaluated using dynamic mechanical analysis (DMA), tensile tests, and water absorption capacity (WUC). The properties–structure interrelation was assessed through a scanning electron microscope. Generally, a higher zein content and processing temperature led to a certain reinforcement of the samples. Moreover, all bioplastics displayed a thermoplastic behaviour finally melting at temperatures around 80 °C. The lack of massive crosslinking enabled this melting, which finally could be used to confirm the ability of zein based materials to be recycled, while maintaining their properties. The recyclability of thermoplastic zein materials widens the scope of their application, especially considering its biodegradability. Full article

► Show Figures

Figure 1

23 pages, 20208 KiB

Open AccessArticle

Exploring the Surface Potential of Recycled Polyethylene Terephthalate Composite Supports on the Collagen Contamination Level

by Elena-Luiza Epure, Florina Daniela Cojocaru, Mihaela Aradoaei, Romeo Cristian Ciobanu and Gianina Dodi

Polymers 2023, 15(3), 776; https://doi.org/10.3390/polym15030776 - 3 Feb 2023

Cited by 4 | Viewed by 2298

Abstract

With a significant number of features (namely being multipurpose, inexpensive and durable), thermoplastic polymers, most often named plastics, are part of our daily routine, with an increasing production over the last decade. Among them, polyethylene terephthalate (PET), high-density polyethylene (HDPE) and polypropylene (PP) [...] Read more.

With a significant number of features (namely being multipurpose, inexpensive and durable), thermoplastic polymers, most often named plastics, are part of our daily routine, with an increasing production over the last decade. Among them, polyethylene terephthalate (PET), high-density polyethylene (HDPE) and polypropylene (PP) are distinguished as the five most commonly used plastics in various fields, mainly in the packaging industry. Even if it is difficult to imagine the world without plastics, the boosted plastic assembly comes with huge plastic waste, creating a number of challenges, as the most important threat for our environment, but also opportunities for recycling. Currently, a special attention is dedicated on how to improve the current recycling methods or to find new ones, since the quality of recycled plastics and potential chemical or biological contaminations are two problematic aspects. Understanding the properties of each thermoplastic polymer and the interaction with possible contaminants may be the key for an efficient recycling process. The aim of this paper was to evaluate the surface behaviour of different composite supports based on recycled PET before and after interaction with collagen (used as a biological contaminant). The surface contamination bias of PET supports was studied through different techniques: scanning electron microscopy (SEM), water uptake through swelling studies, contact angle measurements and attenuated total reflection–Fourier transform infrared spectroscopy (ATR-FTIR). Full article

► Show Figures

Figure 1

2022

Jump to: 2024, 2023, 2021

20 pages, 6639 KiB

Open AccessArticle

Waste Eggshells as a Natural Filler for the Poly(Vinyl Chloride) Composites

by Katarzyna Skórczewska, Krzysztof Lewandowski, Piotr Szewczykowski, Sławomir Wilczewski, Joanna Szulc, Paulina Stopa and Paulina Nowakowska

Polymers 2022, 14(20), 4372; https://doi.org/10.3390/polym14204372 - 17 Oct 2022

Cited by 18 | Viewed by 5349

Abstract

The paper presents the characteristics of unplasticized PVC composites modified with biofiller obtained from the waste eggshells of hen eggs. The composites obtained by extrusion contained from 10 phr to 40 phr of biofiller. The filler was characterized using the SEM, TG, and [...] Read more.

The paper presents the characteristics of unplasticized PVC composites modified with biofiller obtained from the waste eggshells of hen eggs. The composites obtained by extrusion contained from 10 phr to 40 phr of biofiller. The filler was characterized using the SEM, TG, and sieve analysis methods. The influence of the filler on the processing properties was determined using plastographometric and MFR tests. Fundamental analysis of mechanical properties was also performed, i.e., Charpy impact strength and determination of tensile properties. The mechanical properties were supported with dynamical mechanical thermal analysis, time of thermal stability, and thermogravimetric analysis. Structure analysis was also performed using SEM and X-ray microcomputed tomography (micro-CT). The processing properties of the tested composites do not give grounds for disqualifying such material from traditional processing PVC mixtures. Notably, the biofiller significantly improves thermal stability. Ground eggshells (ES) work as scavengers for the Cl radicals released in the first stage, which delays the PVC chain’s decay. Additionally, a significant increase in the value of the modulus of elasticity and softening point (VST) of the composites concerning PVC was found. Ground hen eggshells can be used as an effective filler for PVC composites. Full article

► Show Figures

Figure 1

21 pages, 6211 KiB

Open AccessArticle

Manufacture and Characterization of Recycled Polypropylene and Olive Pits Biocomposites

by Sofía Jurado-Contreras, Francisco J. Navas-Martos, José A. Rodríguez-Liébana, Alberto J. Moya and M. Dolores La Rubia

Polymers 2022, 14(19), 4206; https://doi.org/10.3390/polym14194206 - 7 Oct 2022

Cited by 9 | Viewed by 2496

Abstract

The present work studies the use of olive pit (OP) as a reinforcement in the manufacture of composites based on a post-consumer recycled polypropylene (rPP). In this way, it is feasible to provide added value from olive pits, a by-product resulting from the [...] Read more.

The present work studies the use of olive pit (OP) as a reinforcement in the manufacture of composites based on a post-consumer recycled polypropylene (rPP). In this way, it is feasible to provide added value from olive pits, a by-product resulting from the olive industry operations, while promoting the circular economy and reducing the use of fossil-based polymers. For this purpose, suitable samples were manufactured using 25 wt% and 40 wt% of OP. Additionally, the effect of incorporating additives was studied: (a) a process control additive (PA), and (b) a coupling agent of maleic anhydride grafted polypropylene (MAPP). The results showed an improvement in Young’s and flexural modulus with the OP addition. The incorporation of PA did not present any significant improvement in the properties of the materials, nevertheless it facilitated the biocomposite manufacturing process. As for the coupling agent, it significantly improved the mechanical properties, achieving the best results with the addition of the two types of additives and 40 wt% of OP. Moreover, the thermal properties were maintained, and there was an increase in crystallinity in all composites compared to rPP. According to the results of the fracture surface analysis, the coupling agent improves reinforcement-polymer matrix cohesion. Full article

► Show Figures

Figure 1

12 pages, 2216 KiB

Open AccessReview

Recycling of Thermoset Materials and Thermoset-Based Composites: Challenge and Opportunity

by Elisabetta Morici and Nadka Tz. Dintcheva

Polymers 2022, 14(19), 4153; https://doi.org/10.3390/polym14194153 - 4 Oct 2022

Cited by 64 | Viewed by 13161

Abstract

Thermoset materials and their composites are characterized by a long life cycle with their main applications in aircrafts, wind turbines and constructions as insulating materials. Considering the importance of recovery and valorization of these materials at their end-of-life, avoiding landfilling, the interest concerning [...] Read more.

Thermoset materials and their composites are characterized by a long life cycle with their main applications in aircrafts, wind turbines and constructions as insulating materials. Considering the importance of recovery and valorization of these materials at their end-of-life, avoiding landfilling, the interest concerning their recycling grows continuously. The thermoset materials and their composites, to be successfully recovered and valorized, must degrade their three-dimensional structures and recover the mono-oligomers and/or fillers. The thermoset materials could successfully degrade through thermal treatment at different temperatures (for example, above 1000 °C for incineration, ca. 500 °C for oxidation/combustion of organic constituents, etc.), chemical degradation by catalyst, irradiation with or without the presence of water, alcohol, etc., and mechanical recycling, obtaining fine particles that are useful as filler and/or reinforcement additives. Among these recycling methods, this mini-review focuses on the formulation and recovery method of innovative thermoset with in-build recyclability, i.e., materials having chemical links that could be degraded on-demand or containing dynamic covalent bonds to have re-processable and/or recyclable thermoset. This issue could be considered the future perspective in developing novel thermoset materials. The aim of this review is to get an overview of the state of the art in thermoset recycling and of the most commonly used thermoset composites, recovering valuable reinforcing fibers. Additionally, in this work, we also report not only known recycling routes for thermoset and thermoset-based composites, but also new and novel formulating strategies for producing thermosets with built-in recyclability, i.e., containing chemical-triggered on-demand links. This mini-review is also a valuable guide for educational purposes for students and specialized technicians in polymer production and recycling. Full article

► Show Figures

Graphical abstract

15 pages, 3638 KiB

Open AccessArticle

Economical Chemical Recycling of Complex PET Waste in the Form of Active Packaging Material

by Julija Volmajer Valh, Dimitrije Stopar, Ignacio Selaya Berodia, Alen Erjavec, Olivera Šauperl and Lidija Fras Zemljič

Polymers 2022, 14(16), 3244; https://doi.org/10.3390/polym14163244 - 9 Aug 2022

Cited by 7 | Viewed by 3168

Abstract

Since millions of tons of packaging material cannot be recycled in conventional ways, most of it ends up in landfills or even dumped into the natural environment. The researched methods of chemical depolymerization therefore open a new perspective for the recycling of various [...] Read more.

Since millions of tons of packaging material cannot be recycled in conventional ways, most of it ends up in landfills or even dumped into the natural environment. The researched methods of chemical depolymerization therefore open a new perspective for the recycling of various PET materials, which are especially important for packaging. Food preservative packaging materials made from PET plastics are complex, and their wastes are often contaminated, so there are no sophisticated solutions for them in the recycling industry. After integrating the biopolymer chitosan, which is derived from natural chitin, as an active surface additive in PET materials, we discovered that it not only enriches the packaging material as a microbial inhibitor to reduce the bacteria Staphylococcus aureus and Escherichia coli, thus extending the shelf life of the contained food, but also enables economical chemical recycling by alkaline or neutral hydrolysis, which is an environmentally friendly process. Alkaline hydrolysis at a high temperature and pressure completely depolymerizes chitosan-coated PET packaging materials into pure terephthalic acid and charcoal. The products were characterized by Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and elemental analysis. The resulting reusable material represents raw materials in chemical, plastic, textile, and other industries, in addition to the antimicrobial function and recyclability itself. Full article

► Show Figures

Figure 1

23 pages, 6647 KiB

Open AccessReview

Agri-Food Wastes for Bioplastics: European Prospective on Possible Applications in Their Second Life for a Circular Economy

by Annamaria Visco, Cristina Scolaro, Manuela Facchin, Salim Brahimi, Hossem Belhamdi, Vanessa Gatto and Valentina Beghetto

Polymers 2022, 14(13), 2752; https://doi.org/10.3390/polym14132752 - 5 Jul 2022

Cited by 55 | Viewed by 9442

Abstract

Agri-food wastes (such as brewer’s spent grain, olive pomace, residual pulp from fruit juice production, etc.) are produced annually in very high quantities posing a serious problem, both environmentally and economically. These wastes can be used as secondary starting materials to produce value-added [...] Read more.

Agri-food wastes (such as brewer’s spent grain, olive pomace, residual pulp from fruit juice production, etc.) are produced annually in very high quantities posing a serious problem, both environmentally and economically. These wastes can be used as secondary starting materials to produce value-added goods within the principles of the circular economy. In this context, this review focuses on the use of agri-food wastes either to produce building blocks for bioplastics manufacturing or biofillers to be mixed with other bioplastics. The pros and cons of the literature analysis have been highlighted, together with the main aspects related to the production of bioplastics, their use and recycling. The high number of European Union (EU)-funded projects for the valorisation of agri-food waste with the best European practices for this industrial sector confirm a growing interest in safeguarding our planet from environmental pollution. However, problems such as the correct labelling and separation of bioplastics from fossil ones remain open and to be optimised, with the possibility of reuse before final composting and selective recovery of biomass. Full article

► Show Figures

Figure 1

24 pages, 2207 KiB

Open AccessReview

Recycled (Bio)Plastics and (Bio)Plastic Composites: A Trade Opportunity in a Green Future

by Elisabetta Morici, Sabrina Carola Carroccio, Elena Bruno, Paola Scarfato, Giovanni Filippone and Nadka Tz. Dintcheva

Polymers 2022, 14(10), 2038; https://doi.org/10.3390/polym14102038 - 16 May 2022

Cited by 20 | Viewed by 6584

Abstract

Today’s world is at the point where almost everyone realizes the usefulness of going green. Due to so-called global warming, there is an urgent need to find solutions to help the Earth and move towards a green future. Many worldwide events are focusing [...] Read more.

Today’s world is at the point where almost everyone realizes the usefulness of going green. Due to so-called global warming, there is an urgent need to find solutions to help the Earth and move towards a green future. Many worldwide events are focusing on the global technologies in plastics, bioplastic production, the recycling industry, and waste management where the goal is to turn plastic waste into a trade opportunity among the industrialists and manufacturers. The present work aims to review the recycling process via analyzing the recycling of thermoplastic, thermoset polymers, biopolymers, and their complex composite systems, such as fiber-reinforced polymers and nanocomposites. Moreover, it will be highlighted how the frame of the waste management, increasing the materials specificity, cleanliness, and a low level of collected material contamination will increase the potential recycling of plastics and bioplastics-based materials. At the same time, to have a real and approachable trade opportunity in recycling, it needs to implement an integrated single market for secondary raw materials. Full article

► Show Figures

Figure 1

2021

Jump to: 2024, 2023, 2022

12 pages, 1493 KiB

Open AccessArticle

Single-Use Disposable Waste Upcycling via Thermochemical Conversion Pathway

by Junghee Joo, Seonho Lee, Heeyoung Choi, Kun-Yi Andrew Lin and Jechan Lee

Polymers 2021, 13(16), 2617; https://doi.org/10.3390/polym13162617 - 6 Aug 2021

Cited by 3 | Viewed by 2390

Abstract

Herein, the pyrolysis of two types of single-use disposable waste (single-use food containers and corrugated fiberboard) was investigated as an approach to cleanly dispose of municipal solid waste, including plastic waste. For the pyrolysis of single-use food containers or corrugated fiberboard, an increase [...] Read more.

Herein, the pyrolysis of two types of single-use disposable waste (single-use food containers and corrugated fiberboard) was investigated as an approach to cleanly dispose of municipal solid waste, including plastic waste. For the pyrolysis of single-use food containers or corrugated fiberboard, an increase in temperature tended to increase the yield of pyrolytic gas (i.e., non-condensable gases) and decrease the yield of pyrolytic liquid (i.e., a mixture of condensable compounds) and solid residue. The single-use food container-derived pyrolytic product was largely composed of hydrocarbons with a wide range of carbon numbers from C₁ to C₃₂, while the corrugated fiberboard-derived pyrolytic product was composed of a variety of chemical groups such as phenolic compounds, polycyclic aromatic compounds, and oxygenates involving alcohols, acids, aldehydes, ketones, acetates, and esters. Changes in the pyrolysis temperature from 500 °C to 900 °C had no significant effect on the selectivity toward each chemical group found in the pyrolytic liquid derived from either the single-use food containers or corrugated fiberboard. The co-pyrolysis of the single-use food containers and corrugated fiberboard led to 6 times higher hydrogen (H₂) selectivity than the pyrolysis of the single-use food containers only. Furthermore, the co-pyrolysis did not form phenolic compounds or polycyclic aromatic compounds that are hazardous environmental pollutants (0% selectivity), indicating that the co-pyrolysis process is an eco-friendly method to treat single-use disposable waste. Full article

► Show Figures

Graphical abstract

Journal Menu

Journal Browser

Progress in Recycling of (Bio)Polymers and Composites (Closed)

Share This Topical Collection

Editor

Topical Collection Information

Keywords

Related Special Issue

Published Papers (11 papers)

2024

Jump to: 2023, 2022, 2021

2023

Jump to: 2024, 2022, 2021

2022

Jump to: 2024, 2023, 2021

2021

Jump to: 2024, 2023, 2022

Further Information

Guidelines

MDPI Initiatives

Follow MDPI