Next Article in Journal
A Striking Exception to the Chelate Model for Acyclic Diastereocontrol: Efficient Access to a Versatile Propargyl Alcohol for Chemical Synthesis
Previous Article in Journal
Synthesis and Evaluation of in Vitro Biological Activity of 4-Substituted Arylpiperazine Derivatives of 1,7,8,9-Tetrachloro-10,10-dimethoxy-4-azatricyclo[5.2.1.02,6]dec-8-ene-3,5-dione
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis and Antimicrobial Activity of Some Pyridinium Salts

1
Department of Pharmaceutical Chemistry, Faculty of Pharmacy, Ege University, 35100, Bornova, İzmir, Turkey
2
Department of Microbiology, Faculty of Pharmacy, Ege University, 35100 Bornova, İzmir, Turkey
*
Author to whom correspondence should be addressed.
Molecules 2009, 14(12), 5203-5215; https://doi.org/10.3390/molecules14125203
Submission received: 16 November 2009 / Revised: 4 December 2009 / Accepted: 10 December 2009 / Published: 14 December 2009

Abstract

:
Some substituted benzylidenehydrazinylpyridinium derivatives bearing benzyl, ethylphenyl and propylphenyl groups on the pyridinium nitrogen were synthesized and screened for possible antibacterial and antifungal activities against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans using the microdilution method. Antimicrobial test results indicated that compounds containing a 3-phenylpropyl chain displayed the highest antimicrobial activity against Staphylococcus aureus and the compound 3d was the most active in the series against all tested bacteria and fungi strains.

Introduction

The shortage of new antibacterial drugs and increasing resistance of bacteria to antimicrobial agents are important issues in drug development studies. Quaternized amine derivatives were previously reported to exert antimicrobial properties [1,2,3,4], and several mono- or bis-quaternary ammonium compounds, including various alkyl chain lengths or the same long alkyl chain with different hydrophobic substituents were found to exhibit antimicrobial activity [5,6]. The activities of the quaternary ammonium compounds were attributed to their effect on the cell wall resulting in a direct or indirect lethal effect on the cell viability [7].
Pyridinium halides like quaternary nitrogen salts have antimicrobial properties and adsorption properties on negatively charged solids. The polar heads are cationic pyridiniums, that were related to their antimicrobial activities and characteristics [8,9,10,11,12,13,14,15]. The antimicrobial activity of 1-alkyl-pyridinium salts depends on the adsorptive activities on the surface of bacterial cells as well as their destruction [16] and the pKa values of the corresponding pyridines [17]. Factors controlling their antimicrobial activity are molecular hydrophobicity [18,19], adsorbability [20], surface activity [19] and electron density [21,22] of the ammonium nitrogen atom. These compounds possess one hydrophobic alkyl chain and one hydrophilic quaternary nitrogen ion group in the same molecule, which provides a greater surface activity and more profound antimicrobial potency, compared to conventional antimicrobial agents [23].
On the other hand, Schiff bases are important in medicine and many studies have reported their biological activity [24,25]. Hydrazones, a special group of compounds within the Schiff bases, are also known as one of the most important classes of organic compounds, some of which show significant biological activities such as antimicrobial [26,27,28,29,30] antitubercular [31,32,33], anticancer [34,35,36], analgesic [37], anti-inflammatory [37], antiplatelet [38] and antiviral [39] effects.
Previously, we synthesized pyridinium oxime-ether derivatives and evaluated them for their antimicrobial activities [40]. The results showed that the R groups attached to the oxime-ether sturucture did not cause a significant change in the antimicrobial effect; however, the side chain attached to the pyridinium nitrogen noticeably affected the antimicrobial activity. Among them, compounds with 3-phenylpropyl chains displayed a remarkable activity and 1-(3-phenylpropyl)-3-[([(naphthyl-1-il)methoxy]imino]methyl]pyridinium bromide (NF-MFE, Figure 1) having a naphthlene ring and a 3-phenylpropyl chain had the lowest MIC values, in other words the highest antimicrobial activity [40].
Figure 1. Structure of NF-MFE.
Figure 1. Structure of NF-MFE.
Molecules 14 05203 g001
Based on these findings, ortho -methyl, -methoxyl, -hydroxyl benzylidenehydrazinylpyridinium salts with benzyl, 2,6-dichlorobenzyl, 2-phenylethyl and 3-phenylpropyl groups on pyridinium nitrogen were prepared to investigate the effects of such structural modifications of quaternary pyridinium salts on the anticipated antimicrobial activity. It was also planned to replace the oxime-ether function and hydrazone function bioisosterically. Our study also covered the relationship between antimicrobial activity and length of side alkyl chains of the compounds.

Results and Discussion

Chemistry

Benzylidenehydrazinylpyridinium salts were prepared in three steps according to the reported procedure [41], as shown in Scheme 1. In the first step, 4-chloropyridine was refluxed with hydrazine hydrate in 1-propanol to give 4-hydrazinylpyridine (1). This compound was then condensed with various substituted aromatic aldehydes in ethanol at room temperature to obtain the corresponding hydrazone derivatives 2-4. In the last step, the final compounds 2a-4d were obtained by quaternation of hydrazone derivatives 2-4 with the appropriate substituted alkyl halide in ethanol under reflux. All title compounds are novel. With the exception of compound 4, the intermediate compounds 2-4 were reported previously [42,43], but their spectral data have not been described in the literature.
Scheme 1. Synthesis of the title compounds.
Scheme 1. Synthesis of the title compounds.
Molecules 14 05203 g002
The structures of the final compounds were determined by spectral analyses and the spectroscopic properties were in accord with the proposed structures. The IR spectra of the final compounds showed intense absorption bands within 3,315-3,446 cm-1 range and 1,436–1,644 cm-1 range that were attributed to NH and C=N function vibrations, respectively. In the 1H NMR spectra, the proton signals due to the NH group were recorded between 12.26–13.00 ppm. The proton signals belonging to the N=CH group appeared as singlets at 8.52–8.65 ppm. This chemical shift suggested the E-isomer of the compounds. Both IR and 1H-NMR data confirmed the condensation between the amino groups and the carbonyl groups. As expected, while the pyridine hydrogens at the 2 and 6 positions of compounds 24 showed peaks between 8.19–8.21 ppm, the pyridinium hydrogen at these positions in the final compounds 2a4d showed peaks between 8.30–8.55 ppm [44]. The shifts of these peaks to a higher frequency indicated that compounds 24 were quaternized with alkyl halide. All the 13C-NMR findings confirmed the structures proposed as indicated in the Experimental section. The mass spectra of the final compounds 2a4d displayed the correct molecular ion peaks.

Antimicrobial Activity

The new series of benzylidenehydrazinylpyridinium salts with the hydroxyl, methyl, methoxyl substituent in ortho position of benzene ring were evaluated for antimicrobial activity toward the Gram positive and Gram negative bacteria and fungus. The bacterial strains represent important Gram positive and Gram negative species, which are Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Their antibacterial activities were assessed by measuring minimum inhibitory concentration (MIC) with standard broth dilution assay (Table 1).
Table 1. Antimicrobial activity of compounds 2a4d.
Table 1. Antimicrobial activity of compounds 2a4d.
Compound NoMinimum Inhibitory Concentration (MIC) (μg/mL)
E. coliP. aeruginosaS. aureusC. albicans
2a64102464128
3a325121664
4a6451232128
2b>2,048>2,04832>2,048
3b>2,048>2,048641,024
4b>2,048>2,0481282,048
2c645123264
3c322561664
4c645123264
2d64>2,048832
3d32256432
4d1281,024864
Ceftazidime<0.125 (0.06–0.5)*1 (1–4)*4 (4–16)*-
Fluconazole---(0.25–1.0)*
* Acceptable quality control ranges of minimum inhibitory concentrations (MICs) (μg/mL) for reference strains [45,46].
According to the antimicrobial activity results, all compounds were found to possess high antimicrobial activity against Staphylococcus aureus and low antimicrobial activity against Pseudomonas aeruginosa. Among the tested compounds, 2d, 3d, 4d were found to be the most active derivatives against Staphylococcus aureus, being as effective against this organism as the standard compound ceftazidime. The results indicated that the longer the side chain of a compound, the more antimicrobial activity it possesses. Among the benzene ring ortho-substitution series, methyl derivatives are more active than the hydroxyl and methoxyl substituted derivatives. In the methyl substituted series, the antimicrobial activity of the phenylpropyl derivative 3d was followed by the phenylethyl derivative 3c, benzyl derivative 3a and dichlorobenzyl derivative 3b, respectively. No meaningful difference in antibacterial activities were observed for compounds 3c and 3a. Both of them had the same MIC values against test microorganisms, except against Pseudomonas aeruginosa. According to the MIC values of the compounds, 3d had lowest MIC values (4 μg/mL) compared to the other pyridinium salts. Moreover, the compounds 2d, 3d, 4d having the phenylpropyl side chain showed higher activity than oxime-ether derivatives with the same side chain against Staphylococcus aureus. This bioisosteric replacement resulted in a slightly increased antimicrobial activity. On the other hand, compounds with a 2,6-dichlorobenzyl side chain on the pyridinium nitrogen displayed no activity against the Gram negative bacteria. Our study revealed that all the compounds had stronger antibacterial activity against Gram positive bacteria when compared to Gram negative bacteria. The findings suggest that the pyridinium salts act on the cell membranes and surface activity of these compounds may be chiefly responsible for the antibacterial properties of the compounds. However, all the tested compounds exhibited low antifungal activity against Candida albicans. The reason for the weaker antifungal activity according to antibacterial effect might be postulated as different action in the mechanism of the compounds such as inhibition effect on respiratory systems of fungus cells, rather than cell wall destruction.

Experimental

General

Melting points were determined with an Electrothermal IA9100 melting point apparatus and are not corrected. 1H- and 13C-NMR spectra were recorded on a Varian AS 400 Mercury Plus NMR instrument. Chemical shifts were measured in DMSO-d6 with TMS as internal reference. Abbreviations for data quoted are: s, singlet; d, doublet; t, triplet; quin, quintet; dd, doublet of doublets; m, multiplet. IR spectra of compounds were recorded as potassium bromide pellets on a Jasco FT/IR-400 spectrometer. The electrospray ionization (ESI) mass spectra were measured on an Agilent 1100 LC/MSD Trap. The conditions of the spray chamber were as follows: ion polarity, positive; drying gas temperature, 300 °C; nebulizer pressure, 10 psi; drying gas flow, 5.00 L min−1. Reagents and solvents used for synthesis were purchased from Aldrich, Fluka, and Merck companies. Thin-layer chromatographies were carried out on pre-coated silica gel 60 F254 plates (Merck). The spots were visualized with UV light or iodine.

Synthesis of 4-Hydrazinopyridine Hydrochloride (1)

Compound 1 was prepared according to the method reported by Mann et al. [47]. A solution of 4-chloropyridine (0.01 mol) and hydrazine monohydrate (0.15 mol) in 1-propanol (30 mL) was refluxed for 18 h. The solution was cooled to 0 °C and the precipitate was filtered, washed with cold 1-propanol and crystallized from ethanol. Mp: 242–243 °C (lit. [47,48] 242–243 °C).

General Procedure for Synthesis of Benzylidenehydrazinylpyridine Derivatives 2–4

4-Hydrazinylpyridine (0.01 mol) and the appropriate benzaldehyde derivative (0.01 mol) were stirred in ethanol (30 mL) at room temperature for 5–10 h. The precipitate was filtered and washed with cool ethanol and crystallized from ethanol.
4-(2-(2-Hydroxybenzylidene)hydrazinyl)pyridine (2): Yield 58 %; mp: 194 °C; IR (ν, cm-1): 1,425, 1,500, 1,542, 1,598 (aromatic C=C and N=C), 3,004 (aromatic C-H), 3,525 (N-H, O-H); 1H-NMR δ: 6.84-6.89 (4H, m, Ar-H, pyridine-H), 7.19 (1H, td, J = 7.8, 1.6 Hz, Ar-H), 7.64 (1H, dd, J = 7.8, 1.6 Hz, Ar-H), 8.20 (2H, d, J = 5.9 Hz, pyridine-H), 8.24 (1H, s, N=CH), 10.20 (1H, s, OH), 10.79 (1H, s, NH).
4-(2-(2-Methylbenzylidene)hydrazinyl)pyridine (3): Yield 65 %; mp: 202 °C IR (cm-1): 1,427, 1,452, 1,486, 1,527, 1,538 (aromatic C=C and N=C), 2,886, 2,948 (aliphatic C-H), 3,014 (aromatic C-H), 3,210 (N-H); 1H-NMR δ: 6.97 (2H, d, J = 6.2 Hz, pyridine-H), 7.19-7.23 (3H, m, Ar-H), 7.83 (1H, d, J = 8.2 Hz, Ar-H), 8.19 (1H, s, N=CH), 8.21 (2H, d, J = 6.2 Hz, pyridine-H) 10.80 (1H, s, NH).
4-(2-(2-Methoxybenzylidene)hydrazinyl)pyridine (4): Yield 69 %; mp: 205 °C; IR (ν, cm-1): 1,465, 1,492, 1,533, 1,592, (aromatic C=C and N=C), 2,834, 2,886, 2,940, 2,992 (aliphatic C-H), 3,083 (aromatic C-H), 3,212 (N-H); 1H-NMR δ: 3.83 (3H, s, -OCH3), 6.92 (2H, d, J = 6.4 Hz, pyridine-H), 6.98 (1H, t, J = 7.2 Hz, Ar-H), 7.05 (1H, d, J = 8.0 Hz, Ar-H), 7.32 (1H, td, J = 7.8, 1.6 Hz, Ar-H), 7.86 (1H, dd, J = 8.0, 1.6 Hz, Ar-H), 8.19 (2H, d, J = 6.0 Hz, pyridine-H), 8.29 (1H, s, N=CH), 10.78 (1H, s, NH).

General Procedure for Synthesis of the Final Compounds 2a-4d

A mixture of 2-4 (0.01 mol) and the corresponding alkyl halide (0.02 mol) were refluxed in ethanol (30 mL) for 6-50 h. The mixture was cooled to room temperature or 0 °C and the obtained precipitate was filtered and washed with cool ethanol. The crude products were crystallized from ethanol to give compounds 2a4d.
1-Benzyl-4-(2-(2-hydroxybenzylidene)hydazinyl)pyridinium chloride (2a): Yield 73%; mp: 293 °C; IR (ν, cm-1): 1,454, 1,517, 1,552, 1,604 (aromatic C=C and N=C), 1,644 (N+=C), 2,844, 2,915 (aliphatic C-H), 3,075 (aromatic C-H), 3,401 (N-H, O-H); 1H-NMR δ: 5.46 (2H, s, N+-CH2-Ph), 6.86 (1H, t, J = 7.6 Hz, Ar-H), 6.96 (1H, d, J = 8.2 Hz, Ar-H), 7.14 (1H, dd, J = 7.0, 2.0 Hz, Ar-H), 7.27 (1H, td, J = 7.8, 1.6 Hz, Ar-H), 7.36-7.41 (5H, m, Ar-H, pyridinium-H), 7.55 (1H, dd, J = 7.0, 2.3 Hz, pyridinium-H), 7.81 (1H, d, J = 7.8 Hz, Ar-H), 8.43 (1H, d, J = 7.0 Hz, pyridinium-H), 8.52 (1H, d, J = 7.0 Hz, pyridinium-H), 8.64 (1H, s, N=CH), 10.30 (1H, s, OH), 12.93 (1H, s, NH); 13C-NMR δ: 60.79 (CH2), 107.74 (CH), 109.64 (CH), 117.05 (CH), 120.26 (CH), 120.36 (qC), 126.73 (CH), 129.03 (CH), 129.31 (2 CH), 129.50 (2 CH), 132.77 (CH), 136.20 (qC), 143.62 (CH), 144.84 (CH), 145.82 (CH), 154.17 (qC), 157.57 (qC); ESI-MS m/z: 304.35 (M+).
1-(2,6-Dichlorobenzyl)-4-(2-(2-hydroxybenzylidene)hydrazinyl)pyridinium chloride (2b): Yield 68%; mp: 288 °C; (ν, cm-1): 1,440, 1,477, 1,513, 1,548 (aromatic C=C and N=C), 1,643 (N+=C), 2,825, 2,892 (aliphatic C-H), 3,062 (aromatic C-H), 3,446 (N-H, O-H); 1H-NMR δ: 5.70 (2H, s, N+-CH2-Ph), 6.87 (1H, t, J = 7.8 Hz, Ar-H), 6.94 (1H, d, J = 8.4 Hz, Ar-H), 7.06 (1H, dd, J = 7.2, 2.4 Hz, pyridinium-H), 7.28 (1H, td, J = 7.6, 1.6 Hz, Ar-H), 7.52-7.56 (2H, m, Ar-H, pyridinium-H), 7.64 (2H, d, J = 8.0 Hz, Ar-H), 7.80 (1H, dd, J = 7.6, 1.6 Hz, Ar-H), 8.17 (1H, d, J = 7.6 Hz, pyridinium-H), 8.34 (1H, d, J = 7.6 Hz, pyridinium-H), 8.59 (1H, s, N=CH), 10.25 (1H, s, OH), 12.70 (1H, s, NH); 13C NMR δ: 56.16 (CH2), 107.52 (CH), 109.61 (CH), 117.10 (CH), 120.13 (CH), 120.33 (qC), 126.92 (CH), 130.12 (CH), 130.15 (2 CH), 132.79 (CH), 133.23 (qC), 136.92 (qC), 143.08 (CH), 144.62 (CH), 146.20 (CH), 154.19 (qC), 157.66 (qC); ESI-MS m/z: 372.08 (M+), 374.07 (M+2).
4-(2-(2-Hydroxybenzylidene)hydrazinyl)-1-phenethylpyridinium bromide (2c): Yield 83%; mp: 228 °C; IR (ν, cm-1): 1,455, 1,513, 1,550 (aromatic C=C and N=C), 1,644 (N+=C), 2,931, 2,971 (aliphatic C-H), 3,070 (aromatic C-H), 3,264 (O-H), 3,415 (N-H); 1H-NMR δ: 3.12 (2H, t, J = 7.0 Hz, N+-CH2-CH2-Ph), 4.48 (2H, t, J = 7.0 Hz, N+-CH2-CH2-Ph), 6.85-6.97 (3H, m, Ar-H, pyridinium-H), 7.19-7.31 (6H, m, Ar-H), 7.49 (1H, dd, J = 7.0, 2.3 Hz, pyridinium-H), 7.83 (1H, dd, J = 7.8, 1.2 Hz, Ar-H), 8.25 (1H, d, J = 7.0 Hz, pyridinium-H), 8.30 (1H, d, J = 7.0 Hz, pyridinium-H), 8.56 (1H, s, N=CH), 10.16 (1H, s, OH), 12.27 (1H, s, NH); 13C-NMR δ: 36.92 (CH2), 59.05 (CH2), 107.33 (CH), 109.07 (CH), 117.00 (CH), 120.18 (CH), 120.34 (qC), 126.98 (CH), 127.59 (CH), 129.27 (2 CH), 129.59 (2 CH), 132.79 (CH), 137.34 (qC), 143.58 (CH), 144.28 (CH), 145.53 (CH), 153.96 (qC), 157.48 (qC). ESI-MS m/z: 318.42 (M+).
4-(2-(2-Hydroxybenzylidene)hydrazinyl)-1-(3-phenylpropyl)pyridinium bromide (2d): Yield 41%; mp: 197 °C; IR (ν, cm-1): 1,459, 1,492, 1,513, 1,515, 1,552 (aromatic C=C and N=C), 1,644 (N+=C), 2,832, 2,904 (aliphatic C-H), 3,031 (aromatic C-H), 3,419 (N-H, O-H); 1H-NMR δ: 2.12 (2H, quin, J = 7.6 Hz, N+-CH2-CH2-CH2-Ph), 2.59 (2H, t, J = 8.0 Hz, N+-CH2-CH2-CH2-Ph), 4.26 (2H, t, J = 7.4 Hz, N+-CH2-CH2-CH2-Ph), 6.88 (1H, t, J = 7.6 Hz, Ar-H), 6.93 (1H, d, J = 8.0 Hz, Ar-H), 7.03 (1H, d, J = 6.8 Hz, pyridinium-H), 7.15-7.30 (6H, m, Ar-H), 7.54 (1H, dd, J = 7.6, 2.4 Hz, pyridinium-H), 7.84 (1H, dd, J = 7.6, 1.6 Hz, Ar-H), 8.37 (1H, d, J = 7.2 Hz, pyridinium-H), 8.44 (1H, d, J = 7.6 Hz, pyridinium-H), 8.58 (1H, s, N=CH), 10.17 (1H, s, OH), 12.32 (1H, s, NH); 13C-NMR δ:32.24 (CH2), 32.50 (CH2), 58.01 (CH2), 107.50 (CH), 109.22 (CH), 117.00 (CH), 120.26 (CH), 120.36(qC), 126.73 (CH), 127.04 (CH), 128.89 (2 CH), 129.09 (2 CH), 132.73 (CH), 141.15 (qC), 143.50 (CH), 144.69 (CH), 145.41 (CH), 153.98 (qC), 157.42 (qC); ESI-MS m/z: 332.18 (M+).
1-Benzyl-4-(2-(2-methylbenzylidene)hydazinyl)pyridinium chloride (3a): Yield 71%; mp: 257 °C; IR (ν, cm-1): 1,455, 1,482, 1,517, 1,544, 1,600, (aromatic C=C and N=C), 1,644 (N+=C), 2,838, 2,911, 2,979 (aliphatic C-H), 3,037 (aromatic C-H), 3,397 (N-H); 1H-NMR δ: 2.45 (3H, s, CH3), 5.48 (2H, s, N+-CH2-Ph), 7.16 (1H, dd, J = 7.0, 2.3 Hz, pyridinium-H), 7.28 (1H, t, J = 6.6 Hz, Ar-H), 7.33 (1H, d, J = 7.8 Hz, Ar-H), 7.36-7.42 (6H, m, Ar-H), 7.56 (1H, d, J = 7.4 Hz, pyridinium-H), 7.86 (1H, d, J = 7.0 Hz, Ar-H), 8.47 (1H, d, J = 7.4 Hz, pyridinium-H), 8.55 (1H, d, J = 7.4 Hz, pyridinium-H), 8.62 (1H, s, N=CH), 13.00 (1H, s, NH); 13C-NMR δ: 20.13 (CH3), 60.75 (CH2), 107.80 (CH), 109.64 (CH), 126.96 (CH), 127.47 (CH), 128.78 (2 CH), 129.46 (CH), 129.78 (2 CH), 130.97 (CH), 131.78 (CH), 132.18 (qC), 136.20 (qC), 137.92 (qC), 143.72 (CH), 144.89 (CH), 147.99 (CH), 154.38 (qC); ESI-MS m/z: 302.38 (M+).
1-(2,6-Dichlorobenzyl)-4-(2-(2-methylbenzylidene)hydrazinyl)pyridinium chloride (3b): Yield 72%; mp: 290 °C; IR (ν, cm-1): 1,436, 1,513, 1,581 (aromatic C=C and N=C), 1644 (N+=C), 2,694, 2,886 (aliphatic C-H), 3,052 (aromatic C-H), 3,442 (N-H); 1H-NMR δ: 2.46 (3H, s, CH3), 5.70 (2H, s, N+-CH2-Ph), 7.14 (1H, dd, J = 7.2, 2.8 Hz, pyridinium-H), 7.26-7.30 (2H, m, Ar-H), 7.34 (1H, td, J = 7.4, 1.2 Hz, Ar-H), 7.52-7.56 (2H, m, Ar-H, pyridinium-H), 7.64 (2H, d, J = 8.0 Hz, Ar-H), 7.84 (1H, dd, J = 8.4, 1.6 Hz, Ar-H), 8.22 (1H, dd, J = 7.0, 1.6 Hz, pyridinium-H), 8.34 (1H, dd, J = 7.2, 1.6 Hz, pyridinium-H), 8.60 (1H, s, N=CH), 13.00 (1H, s, NH); 13C-NMR δ: 20.12 (CH3) 56.44 (CH2), 108.29 (CH), 110.28 (CH), 125.29 (CH), 128.30 (CH), 129.22 (CH), 129.72 (CH), 130.00 (2 CH), 131.74 (CH), 133.16 (qC), 134.16 (qC), 137.00 (qC), 143.50 (CH), 144.66 (CH), 144.74 (CH), 148.69 (qC), 154.80 (qC); ESI-MS m/z: 370.10 (M+), 372.09 (M+2).
4-(2-(2-Methylbenzylidene)hydrazinyl)-1-phenethylpyridinium bromide (3c): Yield 80%; mp: 190 °C; IR (ν, cm-1): 1,455, 1,513, 1,546, 1,577 (aromatic C=C and N=C), 1,644 (N+=C), 2,836, 2,908 (aliphatic C-H), 3,054 (aromatic C-H), 3,415 (N-H); 1H NMR δ: 2.45 (3H, s, CH3), 3.13 (2H, t, J = 7.2 Hz, N+-CH2-CH2-Ph), 4.50 (2H, t, J = 7.2 Hz, N+-CH2-CH2-Ph), 7.03 (1H, dd, J = 7.0, 2.3 Hz, pyridinium-H), 7.19-7.36 (8H, m, Ar-H), 7.50 (1H, dd, J = 7.0, 2.3 Hz, pyridinium-H), 7.88 (1H, dd, J = 8.2, 1.6 Hz, Ar-H), 8.30 (1H, d, J = 7.4 Hz, pyridinium-H), 8.35 (1H, d, J = 7.0 Hz, pyridinium-H), 8.53 (1H, s, N=CH), 12.38 (1H, s, NH); 13C NMR δ: 20.06 (CH3), 36.92 (CH2), 59.03 (CH2), 107.37 (CH), 108.99 (CH), 126.94 (CH), 127.36 (CH), 127.55 (CH), 129.23 (2 CH), 129.62 (2 CH), 130.96 (CH), 131.73 (CH), 132.12 (qC), 137.33 (qC), 137.89 (qC), 143.71 (CH), 144.84 (CH), 147.53 (CH), 154.10 (qC). ESI-MS m/z: 316.46 (M+).
4-(2-(2-Methylbenzylidene)hydrazinyl)-1-(3-phenylpropyl)pyridinium bromide (3d): Yield 45%; mp: 160 °C; IR (ν, cm-1): 1,454, 1,488, 1,511, 1,552, 1,585, (aromatic C=C and N=C), 1,644 (N+=C), 2,827, 2,915 (aliphatic C-H), 3,058 (aromatic C-H), 3,424 (N-H); 1H-NMR δ: 2.12 (2H, quin, J = 7.6 Hz, N+-CH2-CH2-CH2-Ph), 2.48 (3H, s, CH3), 2.60 (2H, t, J = 7.8 Hz, N+-CH2-CH2-CH2-Ph), 4.28 (2H, t, J = 7.2 Hz, N+-CH2-CH2-CH2-Ph), 7.06 (1H, dd, J = 7.2, 2.4 Hz, pyridinium-H), 7.16-7.30 (7H, m, Ar-H), 7.35 (1H, td, J = 7.2, 1.6 Hz, Ar-H), 7.56 (1H, dd, J = 6.8, 2.4 Hz, pyridinium-H), 7.89 (1H, dd, J = 7.6, 2.0 Hz, Ar-H), 8.39 (1H, d, J = 6.8 Hz, pyridinium-H), 8.46 (1H, d, J = 7.2 Hz, pyridinium-H), 8.52 (1H, s, N=CH), 12.34 (1H, s, NH); 13C-NMR δ: 20.13 (CH3), 32.28 (CH2), 52.50 (CH2), 58.08 (CH2), 107.50 (CH), 109.15 (CH), 126.76 (CH), 126.98 (CH), 127.50 (CH), 128.89 (2 CH), 129.12 (2 CH), 131.00 (CH), 131.80 (CH), 132.14 (qC), 137.33 (qC), 141.15 (qC), 143.79 (CH), 144.80 (CH), 147.64 (CH), 154.29 (qC); ESI-MS m/z: 330.21 (M+).
1-Benzyl-4-(2-(2-methoxybenzylidene)hydazinyl)pyridinium chloride (4a): Yield 73%; mp: 244 °C; IR (ν, cm-1): 1,479, 1,513, 1,546, 1,602 (aromatic C=C and N=C), 1,643 (N+=C), 2,748, 2,908, 2,971 (aliphatic C-H), 3,037 (aromatic C-H), 3,428 (N-H); 1H-NMR δ: 3.85 (3H, s, -OCH3), 5.47 (2H, s, N+-CH2-Ph), 7.02 (1H, t, J = 7.4 Hz, Ar-H), 7.11 (1H, d, J = 8.2 Hz, Ar-H), 7.16 (1H, dd, J = 7.4, 2.7 Hz, pyridinium-H), 7.37-7.46 (6H, m, Ar-H), 7.60 (1H, dd, J = 7.2, 2.7 Hz, pyridinium-H), 7.94 (1H, dd, J = 7.8, 1.6 Hz, Ar-H), 8.45 (1H, d, J = 7.0 Hz, pyridinium-H), 8.54 (1H, d, J = 7.0 Hz, pyridinium-H), 8.65 (1H, s, N=CH), 13.00 (1H, s, NH); 13C-NMR δ: 56.55 (OCH3), 60.82 (CH2), 107.96 (CH), 109.76 (CH), 112.84 (CH), 121.52 (CH), 122.04 (qC), 126.49 (CH), 128.72 (2 CH), 129.48 (CH), 129.80 (2 CH), 133.05 (CH), 136.27 (qC), 143.74 (CH), 144.43 (CH), 144.86 (CH), 154.61 (qC), 158.65 (qC); ESI-MS m/z: 318.41 (M+).
1-(2,6-Dichlorobenzyl)-4-(2-(2-methoxybenzylidene)hydrazinyl)pyridinium chloride (4b): Yield 79%; mp: 274 °C; IR (ν, cm-1): 1,434, 1,459, 1,479, 1,513, 1,542, 1,602, (aromatic C=C and N=C), 1,641 (N+=C), 2,724, 2,904 (aliphatic C-H), 3,064 (aromatic C-H), 3,315 (N-H); 1H-NMR δ: 3.86 (3H, s, -OCH3), 5.71 (2H, s, N+-CH2-Ph), 7.01-7.04 (2H, m, Ar-H, pyridinium-H), 7.12 (1H, d, J = 8.0 Hz, Ar-H), 7.45 (1H, td, J = 7.8, 1.6 Hz, Ar-H), 7.54 (1H, dd, J = 8.8, 7.2 Hz, Ar-H), 7.58 (1H, dd, J = 7.6, 2.8 Hz, pyridinium-H), 7.64 (2H, d, J = 8.0 Hz, Ar-H), 7.91 (1H, dd, J = 7.6, 1.6 Hz, Ar-H), 8.17 (1H, d, J = 7.2 Hz, pyridinium-H), 8.34 (1H, dd, J = 7.2, 1.6 Hz, pyridinium-H), 8.59 (1H, s, N=CH), 12.62 (1H, s, NH); 13C-NMR δ: 56.23 (CH2), 56.54 (OCH3), 107.77 (CH), 109.70 (CH), 112.76 (CH), 121.52 (CH), 122.11 (qC), 130.10 (CH), 130.16 (2 CH), 132.99 (CH), 133.09 (CH), 133.25 (qC), 136.92 (qC), 143.20 (CH), 144.68 (CH), 144.75 (CH), 154.33 (qC), 158.67 (qC). ESI-MS m/z: 386.10 (M+), 388.09 (M+2).
4-(2-(2-Methoxybenzylidene)hydrazinyl)-1-phenethylpyridinium bromide (4c): Yield 95%; mp: 201 °C; IR (ν, cm-1): 1,477, 1,513, 1,548, 1,600, (aromatic C=C and N=C), 1,644 (N+=C), 2,836, 2,904 (aliphatic C-H), 3,064 (aromatic C-H), 3,421 (N-H); 1H-NMR δ: 3.13 (2H, t, J = 7.2 Hz, N+-CH2-CH2-Ph), 3.86 (3H, s, -OCH3), 4.49 (2H, t, J = 7.2 Hz, N+-CH2-CH2-Ph), 6.94 (1H, dd, J = 7.2, 2.3 Hz, pyridinium-H), 7.02 (1H, t, J = 7.4 Hz, Ar-H), 7.12 (1H, d, J = 8.6 Hz, Ar-H), 7.18-7.31 (5H, m, Ar-H), 7.45 (1H, td, J = 7.8, 1.2 Hz, Ar-H), 7.54 (1H, dd, J = 7.2, 2.3 Hz, pyridinium-H), 7.95 (1H, dd, J = 7.6, 1.6 Hz, Ar-H), 8.25 (1H, d, J = 7.0 Hz, pyridinium-H), 8.31 (1H, d, J = 7.0 Hz, pyridinium-H), 8.57 (1H, s, N=CH), 12.26 (1H, s, NH); 13C-NMR δ: 36.92 (CH2), 56.57 (OCH3), 59.06 (CH2), 107.45 (CH), 109.10 (CH), 112.73 (CH), 121.52 (CH), 122.10 (qC), 126.52 (CH), 127.59 (CH), 129.36 (2 CH), 129.61 (2 CH), 132.99 (CH), 137.34 (qC), 143.68 (CH), 144.13 (CH), 144.76 (CH), 154.09 (qC), 158.62 (qC); ESI-MS m/z: 332.46 (M+).
4-(2-(2-Methoxybenzylidene)hydrazinyl)-1-(3-phenylpropyl)pyridinium bromide (4d): Yield 59%; mp: 165 °C; IR (ν, cm-1): 1,457, 1,511, 1,546, 1,571, 1,598, (aromatic C=C and N=C), 1644 (N+=C), 2,832, 2,908, 2,962 (aliphatic C-H), 3,066 (aromatic C-H), 3,421 (N-H); 1H-NMR δ: 2.12 (2H, quin, J = 7.6 Hz, N+-CH2-CH2-CH2-Ph), 2.59 (2H, t, J = 7.8 Hz, N+-CH2-CH2-CH2-Ph), 3.86 (3H, s, -OCH3), 4.26 (2H, t, J = 7.4 Hz, N+-CH2-CH2-CH2-Ph), 6.98-7.05 (2H, m, Ar-H, pyridinium-H), 7.12 (1H, d, J = 8.0 Hz, Ar-H), 7.16-7.30 (5H, m, Ar-H), 7.45 (1H, td, J = 7.6, 1.6 Hz, Ar-H), 7.59 (1H, dd, J = 7.0, 2.4 Hz, pyridinium-H), 7.96 (1H, dd, J = 7.4, 1.6 Hz, Ar-H), 8.36 (1H, d, J = 7.2 Hz, pyridinium-H), 8.44 (1H, d, J = 7.6 Hz, pyridinium-H), 8.58 (1H, s, N=CH), 12.30 (1H, s, NH); 13C-NMR δ: 32.25 (CH2), 32.55 (CH2), 56.53 (OCH3), 58.08 (CH2), 107.64 (CH), 109.25 (CH), 112.65 (CH), 121.51 (CH), 122.11 (qC), 126.46 (CH), 126.72 (CH), 128.89 (2 CH), 129.08 (2 CH), 132.94 (CH), 141.18 (qC), 143.59 (CH), 143.87 (CH), 144.72 (CH), 154.13 (qC), 158.55 (qC); ESI-MS m/z: 346.21 (M+).

Antimicrobial Activity

The minimal inhibitory concentration (MIC) was determined by the broth microdilution method according to the Clinical and Laboratory Standards Institute (CLSI ) [45,46]. In vitro antimicrobial activity of the final compounds 2a4d was evaluated against standard strains; Staphylococcus aureus ATCC 29213, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853 and Candida albicans ATCC 90028. The antibacterial and antifungal assay were performed in Mueller–Hinton broth and Sabouraud dextrose broth, respectively. All the synthesized compounds were weighed (10 mg), dissolved in DMSO (250 μL) and diluted with water (750 μL) to prepare the stock solutions of 10 mg/mL. The serial dilution from 2048 to 1 μg/mL was made in a 96-well plate. Fifty μL of a bacterial suspension, obtained from a 24 h culture (~106 cfu/mL) was added to each well with a final DMSO concentration of 1:16. The plates were incubated at 35 °C for 24 h. We tested ceftazidime as antimicrobial agents for quality control of the method. Each experiment was carried out in duplicate.

Conclusions

In summary, we have described the synthesis of a number of benzylidenehydrazinylpyridinium salts 2a4d with antimicrobial activity. The final synthesized compounds were characterized by spectral data (IR, 1H-NMR, 13C-NMR, ESI-MS). Both the synthesis and antimicrobial activity of the final compounds 2a4d are for the first time. The compounds 2a4d were found to have reasonable activity against S. aureus. A remarkable activity were found in compounds carrying a 3-phenylpropyl side chain on the nitrogen. The most active compound was 4-(2-(2-methylbenzylidene)hydrazinyl)-1-(3-phenylpropyl)pyridinium bromide (3d), having MIC value of 4 μg/mL against S. aureus. The results indicated that the longer side chain on pyridinium nitrogen caused increased activity. Further investigations of this effect are in progress.

Acknowledgements

This study was supported by Ege University Scientific Research Project Council (Project number: 07/ECZ/007).
  • Sample Availability: Samples of compounds 2a-2d, 3a-3d, 4a-4d are available from the corresponding author.

References

  1. Thorsteinsson, T.; Masson, M.; Kristinsson, K.G.; Hjalmarsdottir, M.A.; Hilmarsson, H.; Loftsson, T. Soft antimicrobial agents: Synthesis and activity of labile environmentally friendly long chain quaternary ammonium compounds. J. Med. Chem. 2003, 46, 4173–4181. [Google Scholar] [CrossRef]
  2. Vnutskikh, Z.A.; Shklyaev, Y.V.; Odegova, T.F.; Chekryshkin, Y.S.; Tolstikov, A.G.; El’chishcheva, N.V.; Syropyatov, B.Y. Synthesis and antimicrobial activity of mono-and biquaternized derivates of dipyridylethanes and dipyridylethylenes. Khim. Farm. Zh. 2006, 40, 19–22. [Google Scholar]
  3. Ovchinnikova, I.G.; Fedorova, O.V.; Rusinov, G.L.; Zueva, M.N.; Mordovskoi, G.G. Synthesis and antimicrobial activity of N-alkylpyridinium podands. Khim. Farm. Zh. 2003, 37, 17–19. [Google Scholar]
  4. Burke, J.R.; Frey, P.A. Correlation of electronic effects in N-alkylnicotinamides with NMR chemical shifts and hydride transfer reactivity. J. Org. Chem. 1996, 61, 530–533. [Google Scholar] [CrossRef]
  5. Clarissa, K.L.N.; Singhal, V.; Widmer, F.; Wright, L.C.; Sorrell, T.C.; Jolliffe, K.A. Synthesis, antifungal and haemolytic activity of a series of bis(pyridinium)alkanes. Bioorg. Med. Chem. 2007, 15, 3422–3429. [Google Scholar] [CrossRef]
  6. Zhao, T.; Sun, G. Hydrophobicity and antimicrobial activities of quaternarypyridinium salts. J. Appl. Microbiol. 2008, 104, 824–830. [Google Scholar] [CrossRef]
  7. Kourai, H.; Yabuhara, T.; Shirai, A.; Maeda, T.; Nagamune, H. Synthesis and antimicrobial activities of a series of new bis-quaternary ammonium compounds. Eur. J. Med. Chem. 2006, 41, 437–444. [Google Scholar] [CrossRef]
  8. Okazaki, K.; Maeda, T.; Nagamune, H.; Manabe, Y.; Kourai, H. Synthesis and antimicrobial characteristics of 4,4'-(α,ω-polymethylenedithio)bis-(1-alkylpyridinium iodide)s. Chem. Pharm. Bull. 1997, 45, 1970–1974. [Google Scholar] [CrossRef]
  9. Maeda, T.; Okazaki, K.; Nagamune, H.; Manabe, Y.; Kourai, H. Bactericidal action of 4,4'-(α,ω-polymethylenedithio)bis-(1-alkylpyridinium iodide)s. Biol. Pharm. Bull. 1998, 21, 1057–1061. [Google Scholar] [CrossRef]
  10. Maeda, T.; Manabe, Y.; Yamamoto, M.; Yoshida, M.; Okazaki, K.; Nagamune, H.; Hiroki, K. Synthesis and antimicrobial characteristics of novel biocides. 4,4'-(1,6-Hexamethylene dioxydicarbonyl)bis(1-alkylpyridinium iodide)s. Chem. Pharm. Bull. 1999, 47, 1020–1023. [Google Scholar] [CrossRef]
  11. Yoshida, M.; Maeda, T.; Okazaki, K.; Nagamune, H.; Kunikata, K.; Tsuchiya, H.; Tetsuto, N.; Hiroki, K. Synthesis and antimicrobial characteristics of N,N'-Hexamethylenebis(4-carbamoyl-1-decylpyridinium bromide). Biocontrol Sci. 2000, 5, 65–71. [Google Scholar] [CrossRef]
  12. Yoshida, M.; Maeda, T.; Okazaki, K.; Nagamune, H.; Kunikata, K.; Tsuchiya, H.; Namba, T.; Kourai, H. Synthesis of 4,4'-(tetramethylenedicarbonyldiamino)-bis(1-decylpyridinium bromide) and its antimicrobial and deodorant characteristics. Biocontrol Sci. 2001, 6, 75–80. [Google Scholar] [CrossRef]
  13. Shirai, A.; Maeda, T.; Hara, I.; Yoshinari, A.; Nagamune, H.; Kourai, H. Antimicrobial characteristics of bis-quaternary ammonium compounds possessing a p-phenylene group in their spacer chains. Biocontrol Sci. 2003, 8, 151–157. [Google Scholar] [CrossRef]
  14. Pernak, J.; Rogoz, J.; Mirska, I. Synthesis and antimicrobial activities of new pyridinium and benzimidazolium chlorides. Eur. J. Med. Chem. 2001, 36, 313–320. [Google Scholar] [CrossRef]
  15. Viscardi, G.; Quagliotto, P.; Barolo, C.; Savarino, P.; Barni, E.; Fisicaro, E. Synthesis and surface and antimicrobial properties of novel cationic surfactants. J. Org. Chem. 2000, 65, 8197–8203. [Google Scholar] [CrossRef]
  16. Kourai, H.; Takechi, H.; Horie, T.; Uchiwa, N.; Takeichi, K.; Shibasaki, I. The antimicrobial characteristics of quaternary ammonium salts. Part X. Antimicrobial characteristics and a mode of action of N-alkylpyridinium iodides against Escherichia coli. J. Antibact. Antifung. Agents 1985, 13, 3–10. [Google Scholar]
  17. Kourai, H.; Takechi, H.; Horie, T.; Takeichi, K.; Shibasaki, I. The antimicrobial characteristics of quaternary ammonium salts. Part XI. Quantitative structure-activity relationship of antimicrobial N-laurylpyridinium iodides. J. Antibact., Antifung. Agents 1985, 13, 245–253. [Google Scholar]
  18. Kourai, H.; Machikawa, F.; Horie, T.; Takeichi, K.; Shibasaki, I. The antimicrobial characteristics of quaternary ammonium salts. Part IX. Quantitative structure-activity correlation on antimicrobial activity and hydrophobicity of N-alkylypyridinium iodide derivatives. J. Antibact. Antifung. Agents 1983, 11, 553–562. [Google Scholar]
  19. Kourai, H.; Manabe, Y.; Matsutani, E.; Hasegawa, Y.; Nakagawa, K. Antimicrobial activities of alkylallyldimethylammonium iodides and alkylallyldiethylammonium iodides. J. Antibact. Antifung. Agents. 1995, 23, 271–280. [Google Scholar]
  20. Kourai, H.; Machikawa, F.; Horie, T.; Takeichi, K.; Shibasaki, I. The antimicrobial characteristics of quaternary ammonium salts. Part VII. Quantitative relation between antimicrobial activity and adsorbability of N-octylquinolinium iodide on Escherichia Coli K12. J. Antibact. Antifung. Agents 1983, 11, 51–54. [Google Scholar]
  21. Maeda, T.; Goto, S.; Manabe, Y.; Okazaki, K.; Nagamune, H.; Kourai, H. Bactericidal action of N-alkylcyanopyridinium bromides against Escherichia Coli K12 W3110. Biocontrol Sci. 1996, 1, 41–49. [Google Scholar] [CrossRef]
  22. Okazaki, K.; Maeda, T.; Nagamune, H.; Kourai, H. Quantitative structure-activity relationship of antibacterial dodecylpyridinium iodide derivatives. Biocontrol Sci. 1996, 1, 51–59. [Google Scholar] [CrossRef]
  23. Shirai, A.; Maeda, T.; Nagamune, H.; Matsuki, H.; Kaneshina, S.; Kourai, H. Biological and physicochemical properties of gemini quaternary ammonium compounds in which the positions of a cross-linking sulfur in the spacer differ. Eur. J. Med. Chem. 2005, 40, 113–123. [Google Scholar] [CrossRef]
  24. Sridhara, S.K.; Pandeyab, S.N.; Stablesc, J.P.; Ramesha, A. Anticonvulsant activity of hydrazones, Schiff and Mannich bases of isatin derivatives. Eur. J. Pharm. Sci. 2002, 16, 129–132. [Google Scholar] [CrossRef]
  25. Pandeya, S.N.; Sriram, D.; Nath, G.; De Clercq, E. Synthesis and antimicrobial activity of Schiff and Mannich bases of isatin and its derivatives with pyrimidine. Farmaco 1999, 54, 624–628. [Google Scholar] [CrossRef]
  26. Vicini, P.; Zani, F.; Cozzini, P.; Doytchinova, I. Hydrazones of 1,2-benzisothiazole hydrazides: synthesis, antimicrobial activity and QSAR investigations. Eur. J. Med. Chem. 2002, 37, 553–564. [Google Scholar] [CrossRef]
  27. Gössnitzera, E.; Feierlb, G.; Wagnerb, U. Synthesis, structure investigations, and antimicrobial activity of selected s-trans-6-aryl-4-isopropyl-2-h2-[(E)-1-phenylalkylidene]-(E)-hydrazino 1,4-dihydropyrimidine hydrochlorides. Eur. J. Pharm. Sci. 2002, 15, 49–61. [Google Scholar] [CrossRef]
  28. Küçükgüzel, Ş.G.; Mazi, A.; Şahin, F.; Öztürk, S.; Stables, J.P. Synthesis and biological activities of diflunisal hydrazide-hydrazones. Eur. J. Med. Chem. 2003, 38, 1005–1009. [Google Scholar] [CrossRef]
  29. Loncle, C.; Brunel, J.; Vidal, N.; Dherbomez, M.; Letourneux, Y. Synthesis and antifungal activity of cholesterol-hydrazone derivatives. Eur. J. Med. Chem. 2004, 39, 1067–1071. [Google Scholar] [CrossRef]
  30. Masunari, A.; Tavares, L.C. A new class of nifuroxazide analogues: Synthesis of 5-nitrophene derivatives with antimicrobial activity against multidrug-resistant Staphylococcus aureus. Bioorg. Med. Chem. 2007, 15, 4229–4236. [Google Scholar] [CrossRef]
  31. Savini, L.; Chiasserini, L.; Gaeta, A.; Pellerano, C. Synthesis and anti-tubercular evaluation of quinolylhydrazones. Bioorg. Med. Chem. 2002, 10, 2193–2198. [Google Scholar] [CrossRef]
  32. Kaymakçıoğlu, B.K.; Rollas, S. Synthesis, characterization and evaluation of antituberculosis activity of some hydrazones. Il Farmaco. 2002, 57, 595–599. [Google Scholar] [CrossRef]
  33. Gemma, S.; Savini, L.; Altarelli, M.; Tripaldi, P.; Chiasserini, L.; Coccone, S.S.; Kumar, V.; Camodeca, C.; Campiani, G.; Novellino, E.; Clarizio, S.; Delogu, G.; Butini, S. Development of antitubercular compounds based on a 4-quinolylhydrazone scaffold. Further structure–activity relationship studies. Bioorg. Med. Chem. 2009, 17, 6063–6072. [Google Scholar] [CrossRef]
  34. Pandey, J.; Pal, R.; Dwivedi, A.; Hajela, K. Synthesis of some new diaryl and triaryl hydrazone derivatives as possible estrogen receptor modulators. Arzneimittelforschung 2002, 52, 39–44. [Google Scholar]
  35. Savini, L.; Chiasserini, L.; Travagli, V.; Pellerano, C.; Novellino, E.; Cosentino, S.; Pisano, M.B. New α-heterocyclichydrazones: evaluation of anticancer, anti-HIV and antimicrobial activity. Eur. J. Med. Chem. 2004, 39, 113–122. [Google Scholar] [CrossRef]
  36. Cocco, M.T.; Congiu, C.; Lilliu, V.; Onnis, V. Synthesis and in vitro antitumoral activity of new hydrazinopyrimidine-5-carbonitrile derivatives. Bioorg. Med. Chem. 2005, 14, 366–372. [Google Scholar]
  37. Salgın-Gökşen, U.; Gökhan-Kelekçi, N.; Göktaş, Ö.; Köysal, Y.; Kılıç, E.; Işık, Ş.; Aktay, G.; Özalp, M. 1-Acylthiosemicarbazides, 1,2,4-triazole-5(4H)-thiones, 1,3,4-thiadiazoles andhydrazones containing 5-methyl-2-benzoxazolinones: Synthesis, analgesic-anti-inflammatory and antimicrobial activities. Bioorg. Med. Chem. 2007, 15, 5738–5751. [Google Scholar] [CrossRef]
  38. Silva, G.A.; Costa, L.M.M.; Brito, F.C.F.; Miranda, A.L.P.; Barreiro, E.J.; Fraga, C.A.M. New class of potent antinociceptive and antiplatelet 10H-phenothiazine-1-acylhydrazone derivatives. Bioorg. Med. Chem. 2004, 12, 3149–3158. [Google Scholar] [CrossRef]
  39. Vicini, P.; Incerti, M.; La Colla, P.; Loddo, R. Anti-HIV evaluation of benzo[d]isothiazole hydrazones. Eur. J. Med. Chem. 2009, 44, 1801–1807. [Google Scholar] [CrossRef]
  40. Alptüzün, V.; Taşlı, H.; Erciyas, E. Synthesis and antimicrobial activities of some pyridinium salts. J. Fac. Pharm, Ankara. 2006, 35, 177–188. [Google Scholar]
  41. Douglas, A.W.; Fisher, M.H.; Fishinger, J.J.; Gund, P.; Harris, E.E.; Olson, G.; Patchett, A.A.; Ruyle, W.V. Anticoccidial 1-Substituted 4(1H)-Pyridinone Hydrazones. J. Med. Chem. 1977, 20, 939–943. [Google Scholar] [CrossRef]
  42. Hegarty, A.F.; Moroney, P.J.; Scott, F.L. A change from rate-determining bromination to geometric isomerisation of pyridylhydrazones. J. Chem. Soc. Perkin Trans. 2 1973, 1466–1471. [Google Scholar]
  43. Vereshchagina, N.N.; Postovskii, I. Trudy Ural’skogo Politekhnicheskogo Instituta im. S. M. Kirova. 1960, 94, 24–33. [Google Scholar]
  44. Hesse, M.; Meier, H.; Zeeh, B. Spectroscopic Methods in Organic Chemistry; Enders, D., Noyori, R., Trost, B.M., Eds.; Georg Thieme Verlag Stuttgart: New York, NY, USA, 1997; p. 212. [Google Scholar]
  45. Clinical and Laboratory Standards Institute (CLSI). Performance standards for antimicrobial susceptibility testing; eighteen informational supplement M100–S18. CLSI, Wayne, PA, USA, 2008.
  46. The National Commmittee for Clinical Laboratory Standards (NCCLS). Reference method for broth dilution antifungal susceptibility testing of yeasts; approved standard-second edition, M27-A2. NCCLS, 2002, Wayne, PA, USA.
  47. Mann, F.G.; Prior, A.F.; Willcox, T.J. The structure and properties of certain polycyclic indolo- and quinolino-derivatives. Part XIII. The cyclisation of certain 4-pyridyl- and 4-quinolyl- hydraxones. J. Chem. Soc. 1959, 3830–3834. [Google Scholar]
  48. Comrie, A.M.; Stenlake, J.B. Antituberculosis agens. Part III. Pyridine-4-sulphonamides and –sulphonhydrazides. J. Chem. Soc. 1958, 3514–3518. [Google Scholar]

Share and Cite

MDPI and ACS Style

Alptüzün, V.; Parlar, S.; Taşlı, H.; Erciyas, E. Synthesis and Antimicrobial Activity of Some Pyridinium Salts. Molecules 2009, 14, 5203-5215. https://doi.org/10.3390/molecules14125203

AMA Style

Alptüzün V, Parlar S, Taşlı H, Erciyas E. Synthesis and Antimicrobial Activity of Some Pyridinium Salts. Molecules. 2009; 14(12):5203-5215. https://doi.org/10.3390/molecules14125203

Chicago/Turabian Style

Alptüzün, Vildan, Sülünay Parlar, Hüseyin Taşlı, and Ercin Erciyas. 2009. "Synthesis and Antimicrobial Activity of Some Pyridinium Salts" Molecules 14, no. 12: 5203-5215. https://doi.org/10.3390/molecules14125203

APA Style

Alptüzün, V., Parlar, S., Taşlı, H., & Erciyas, E. (2009). Synthesis and Antimicrobial Activity of Some Pyridinium Salts. Molecules, 14(12), 5203-5215. https://doi.org/10.3390/molecules14125203

Article Metrics

Back to TopTop