Next Article in Journal
Privileged Scaffold Hybridization in the Design of Carbonic Anhydrase Inhibitors
Previous Article in Journal
Synthesis, Characterization, and Biological Evaluation of N-Methyl Derivatives of Norbelladine
Previous Article in Special Issue
Thermodynamic Studies of Complexes in Cu(II)/Uridine-5′-Diphosphoglucuronic Acid System
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 29
Issue 18
10.3390/molecules29184443
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

An Unprecedented Tridentate-Bridging Coordination Mode of Permanganate Ions: The Synthesis of an Anionic Coordination Polymer—[CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞]—Containing Potassium Central Ion and Chlorido and Permanganato Ligands

by
László Kótai
1,*,
Kende Attila Béres
1,2,
Attila Farkas
3,
Berta Barta Holló
4,
Vladimir M. Petruševski
5,
Zoltán Homonnay
1,6,
László Trif
1,
Fernanda Paiva Franguelli
1 and
Laura Bereczki
1,7
1
Institute of Materials and Environmental Chemistry, HUN-REN Research Centre for Natural Sciences, H-1117 Budapest, Hungary
2
György Hevesy PhD School of Chemistry, ELTE Eötvös Loránd University, H-1117 Budapest, Hungary
3
Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, H-1111 Budapest, Hungary
4
Faculty of Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
5
Faculty of Natural Sciences and Mathematics, Ss. Cyril and Methodius University, MK-1000 Skopje, North Macedonia
6
Institute of Chemistry, ELTE Eötvös Loránd University, H-1117 Budapest, Hungary
7
Chemical Crystallography Research Laboratory, Centre for Structural Science, HUN-REN Research Centre for Natural Sciences, H-1117 Budapest, Hungary
*
Author to whom correspondence should be addressed.
Molecules 2024, 29(18), 4443; https://doi.org/10.3390/molecules29184443
Submission received: 20 June 2024 / Revised: 15 September 2024 / Accepted: 15 September 2024 / Published: 19 September 2024
(This article belongs to the Special Issue Synthesis, Structure, Molecular Modeling, and Bioactivity of Metal Complexes)
Browse Figures
Review Reports Versions Notes

Abstract

:
A unique compound (compound 1) with structural features including an unprecedented tridentate-bridging coordination mode of permanganate ions and an eight-coordinated (rhombohedral) κ1-chlorido and tridentate permanganato ligand in a potassium complex containing coordination polymer (CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞) with isolated regular octahedral hexamminecobalt(III) cation was synthesized with a yield of >90%. The structure was found to be stabilized by mono and bifurcated N-H∙∙∙Cl and N-H∙∙∙O (bridging and non-bridging) hydrogen bonds. Detailed spectroscopic (IR, far-IR, and Raman) studies and correlation analysis were performed to assign all vibrational modes. The existence of a resonance Raman effect of compound 1 was also observed. The thermal decomposition products at 500 °C were found to be tetragonal nano-CoMn2O4 spinel with 19–25 nm crystallite size and KCl. The decomposition intermediates formed in toluene at 110 °C showed the presence of a potassium- and chloride-containing intermediates combined into KCl during aqueous leaching, together with the formation of cobalt(II) nitrate hexahydrate. This means that the CoIII–CoII redox reaction and the complete decomposition of the permanganate ions occurred in the first decomposition step, with a partial oxidation of ammonia into nitrate ions.

1. Introduction

Reactive transition metal complexes containing reducing ligands such as ammonia, pyridine, or urea and oxoanions of metals can easily be transformed into amorphous oxides in solid-state quasi-intramolecular redox reactions under controlled heating, leading to the synthesis of various catalysts with special structures, surfaces, and catalytic properties [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22]. Among these complexes, the permanganate salts of complex cations containing iron or cobalt have enormous importance in green fuel production technologies due to the activity of the prepared mixed oxides, for example in CO2 transformation reactions [23,24,25,26,27,28,29,30,31,32,33,34] and Fischer-Tropsch synthesis [21,35,36,37,38,39,40,41,42,43]. Not just reduction reactions but also oxidation reactions can be performed with a cobalt-manganese oxide catalyst in different procedures [44,45], like the oxidation of CO [46,47,48,49,50], volatile organic compounds (VOCs) [51,52,53] like propane [54,55,56], benzene [57], toluene [58,59,60], or other open chain [61,62,63] or cyclic [64,65] organic compounds, and special compounds like 5-hydroxymethylfurfural [66,67]. Furthermore, Co-Mn mixed oxides can be also applied in electrochemical [68,69,70,71,72,73,74] or inorganic material transformation [75,76,77,78] processes.
Cobalt complexes with ammonia ligands ensure high variability of the Co to Mn ratio in the prepared mixed oxides via the preparation of precursors with various Co to Mn ratios (1:1 for [Co(NH3)4CO3](MnO4) [3], [Co(NH3)6)]Cl2(MnO4) [42], [Co(NH3)6]Br2(MnO4) [38], 1:2 for [Co(NH3)5Cl](MnO4)2 [41] and 1:3 for [Co(NH3)6](MnO4)3 [79]). Furthermore, the final Co to Mn ratio also depends on the leaching conditions of the primary decomposition products before completing the formation of a spinel-type mixed oxide by post-heat treatment [41,42]. The precursors, thermal treatments, and processing of the primarily found amorphous oxides revealed various (Co,Mn)T−4(Co,Mn)2OC−6O4+δ spinels having variable Co to Mn overall ratios with various cation (CoII,III and MnII,III) distributions between the T−4 and OC−6 spinel sites and with a variable number of defects. These conditions led to new catalysts with defect structures and different valence distributions of each metal at the T−4 and OC−6 locations [41,42]; this feature has a primary influence on their catalytic activity in various chemical processes [18,19,20]. The role of alkali promoters in the Fischer-Tropsch synthesis and other similar processes has been well-known for a long time [80,81,82]. Therefore, we prepared a new precursor, which is a triple salt containing potassium, cobalt, and permanganate ions.
We selected a poorly characterized potassium-containing triple salt of hexaamminecobalt(III) cations, chloride anions, and permanganate anions (K[Co(NH3)6]Cl2(MnO4)2, compound 1), synthesized first by Klobb in 1887 [83] in the reaction of hexaamminecobalt(III) chloride (luteocobaltic chloride) and potassium permanganate as a by-product during the preparation of [Co(NH3)6]Cl2MnO4 (compound 2) and [Co(NH3)6](MnO4)3 (compound 3). Klobb recognized that during his analysis, ca. 20–30% of the ammonia was oxidized [84]. To study the structure and properties of compound 1, including its suitability to prepare K-doped cobalt manganese oxides in solid phase low-temperature (<200 °C) quasi-intramolecular redox reactions, we optimized the preparation conditions, determined its structure, and studied its spectroscopic and thermal properties.

2. Results and Discussion

The purple beautiful hexagonal plates synthesized first by Klobb in 1887 in the reaction of hexaamminecobalt(III) chloride and potassium permanganate during the preparation of [Co(NH3)6](MnO4)3 and [Co(NH3)6]Cl2(MnO4) [84] were found to be the same compound—[Co(NH3)6][K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)] (compound 1)—as that prepared by us now (ESI Figure S1). Klobb found that this compound formed only if potassium permanganate was not used in excess to isolate [Co(NH3)6](MnO4)3. When Klobb mixed a cold concentrated solution of 2 moles of luteocobaltic chloride ([Co(NH3)6]Cl3) and 3 moles of KMnO4, a violet salt was gradually crystallized which could be dried at 50 °C. The same compound was formed when a concentrated solution of KCl was mixed with luteocobaltic chloride permanganate ([Co(NH3)6]Cl2(MnO4), compound 2) or luteocobaltic permanganate ([Co(NH3)6](MnO4)3, compound 3) with the formation of luteocobaltic chloride (Equation (1)) or KMnO4 (Equation (2)), respectively.
2[Co(NH3)6](MnO4)Cl2 + KCl → [Co(NH3)6]Cl3 + [Co(NH3)6][K(MnO4)2Cl2]
[Co(NH3)6](MnO4)3 + 2KCl → [Co(NH3)6][K(MnO4)2Cl2] + KMnO4
It is obvious that compound 1 forms in a crystallization segment of the K,Co(NH3)6/MnO4,Cl—H2O system when the conditions are unfavorable for the crystallization of compounds 2 and 3, or [Co(NH3)6]Cl3 and KMnO4. We optimized the preparation conditions with an increase of the reaction temperature to 60 °C (above this temperature the ammonia ligands of hexaamminecobalt(III) chloride reacted with potassium permanganate), keeping the molar ratio of [Co(NH3)6]Cl3 to KMnO4 at 1.5. With crystallization of the mother liquor overnight at room temperature, the yield increased to 91.6% with the formation of phase-pure compound 1. The same anhydrous compound formed when the crystallization temperature of the mother liquor was +5 °C (ESI Figure S2).
The triple salt appears as small platelets, which are purple or black depending on the thickness, often with a greasy luster. Compound 1 is soluble in water (4.92 g/L) but with partial decomposition. The pH of the saturated solution is 5.9, which unambiguously shows that the complex cation minimally dissociates, with the liberation of ammonia ligands, due to the lack of ammonia protonation. The high electrolytic conductivity (4.45 mS), taking into account the lack of highly mobile hydroxide ions, may be attributed to the incongruent character of the dissolution and dissociation of the polymer anions with the formation of potassium, chloride, and permanganate anions. The electrolytic conductivities of hexaamminecobalt(III) chloride (μ = 3.41 mS, pH = 4.43), potassium permanganate (μ = 1.341 mS), and potassium chloride (μ = 2.08 mS) at equivalent concentrations of [Co(NH3)6]3+, chloride, potassium, and permanganate ions in the saturated aq. solution of compound 1 confirmed this assumption. Klobb found that the evaporation of the aqueous solution of compound 1 to dryness resulted in the formation of [Co(NH3)6]Cl3, [Co(NH3)6](MnO4)3, and KCl [84]. Our studies showed that pure compound 1 can be recrystallized from water without decomposition. Dry compound 1 is stable as a solid in the dark for more than 2 weeks at room temperature but explodes on fast heating or if smashed by a hammer.

2.1. Single Crystal X-ray Studies of Compound 1

Violet hexagonal prism-like single crystals of compound 1 were grown from water by slow partial evaporation at room temperature. Single crystal X-ray measurements were performed at 100 K and 273 K; the main crystal data and details of the structure determination and refinement are listed in Table 1 and Table 2. Low-temperature DSC studies showed a weak, reversible, and elongated endothermic heat effect (ESI Figure S3) with peak maxima at −36.5 °C (236.65 K) and −42.6 °C (230.55 K) and with 0.98 J/g and 1.58 J/g heat effects at 10 and 20 °C/min heating rates, respectively. The calculated powder XRD pattern of the SXRD measurement at 100 K agrees well with the experimentally found powder X-ray data measured at room temperature, and no distinguishable differences were found in the number of the calculated peaks from the single crystal X-ray data found both at 100 and 273 K (ESI Figure S4). The calculated peak positions completely coincided at 100 K and 273 K at low but were slightly shifted at high 2θ values, which may be attributed to the influence of thermal expansion. The phase transition, however, revealed that a process without changing the crystal symmetry proceeds, which resulted in an endothermic signal in the DSC curve (ESI Figure S3).
Symmetry codes to generate equivalent atoms:
  • y + 2/3, −x + y + 1/3, −z + 1/3
  • −x + y, −x + 1, z
  • −x + 2/3, −y + 1/3, −z + 1/3 + 1
  • −x + y, −x, z
Compound 1 crystallizes in the trigonal R-3m space group. The compound slowly decomposes under X-ray irradiation, even at 100 K, and fast at 273 K. Thus the crystallographic parameters of the compounds are given from the measurements made at liquid nitrogen temperature. The hexaamminecobalt(III) cation has regular octahedral coordination without any distortion (all six Co-N distances are 1.959(2) Å) (Figure 1a). In the asymmetric unit, there are 1/12th of the complex cation, 1/6th of a permanganate ion, 1/12th of a chloride anion, and 1/12th of a potassium central ion. The potassium ions are coordinated as central ions by six bridging permanganate anions and two chloride ions. The coordination around the potassium ion is rhombohedral (Figure 1b). Three oxygen atoms of a permanganate anion (O2) are coordinated to potassium ions and the fourth oxygen atom (O1) is not coordinated. Additionally, every permanganate ion is connected to three potassium cations. This bridging tridentate coordination mode of the permanganate ion, especially to a weak acceptor alkali metal ion, is unprecedented. Therefore, detailed spectroscopic studies of compound 1 were also performed (see below).
Every permanganate ion is coordinated with three potassium ions, making a polymeric network. Two chloride ions are coordinated to the potassium ions axially with a 3.433(1) Å bond length at 100 K and a 3.471 Å bond length at 237 K. The permanganate oxygen atoms are coordinated to the potassium equatorially with a six-fold symmetry. Only the O2 oxygen atoms are coordinated to the potassium; O1 oxygen atoms stay uncoordinated. The O2-K1-Cl1 angle is 64.99(4)° in the 100 K structure and 65.15(8) in the 273 K structure. The potassium coordination is very similar to that of a 18-crown-6 ether axially coordinating two chloride ions, but the coordinated oxygen atoms are more bent out of the equatorial plane compared to a crown ether complex [85,86]. The K⸱⸱⸱O and K⸱⸱⸱Cl bond distances were found to be very similar to the values found in compound 1 in chlorido-ligated 18-crown-6 potassium complexes such as (18-crown-6)(chlorido)potassium dihydrate [85] and catena-[bis(μ2-chlorido)(18-crown-6)potassium(I)-silver(I)] [86]. The two equivalent chlorido ligands are weakly-coordinated (dK⸱⸱⸱Cl = 3.509 Å), and their arrangement is transoid. The hexaamminecobalt(III) cationic layers alternate with negatively charged layers that are thoroughly connected with coordinative covalent bonds (Figure 2). The bond lengths, angles, and torsions at 100 and 273 K in compound 1 are listed in Table 2.
The linear thermal expansion coefficients were calculated and found to be 1.765 × 10−14 m/K and 7.735 × 10−14 m/K in the direction of a/b and c axes, respectively. The elongation in the direction of the c-axis is >4-fold higher than in the direction of a/b axes, which suggests an increasing distance between the cationic and anionic layers (Figure 2) accompanied by a decrease in the strength of the N-H⸱⸱⸱Cl and N-H⸱⸱⸱O interactions. (The N⸱⸱⸱Cl and N⸱⸱⸱O distances between the ammonia ligands of the hexaamminecobalt(III) cations and the chloride ions, as well as the permanganate oxygen atoms, respectively, are given at 100 K and 273 K in Table 1). Based on these values, the weak endothermic effect on the DSC curve centered around −35 °C (ESI Figure S3) can be attributed to the changes in the secondary (hydrogen) bond interactions and not to a phase transition of compound 1. The unit cell of compound 1 from the directions of the three different unit cell axes is shown in Figure 3.
The main parameters of the hydrogen bonds in compound 1 at 100 and 273 K are summarized in Table 3. Every oxygen atom of the permanganate ion and the chloride ions coordinated to potassium take part in hydrogen bond interactions. There are 6 × 5 = 30 hydrogen bond interactions and 12 N-H⸱⸱⸱Cl and 18 N-H⸱⸱⸱O interactions per monomeric unit. The weakest interaction was found between the chloride ion and one of the ammonia hydrogen atoms (C); the same ammonia hydrogen (C) also interacts with one of the coordinated bridging permanganate oxygen atoms. The second hydrogen of the ammonia (B) is coordinated both to a bridging and a non-bridging permanganate oxygen, whereas the third hydrogen (A) is coordinated to the chloride ion as well. Accordingly, two ammonia hydrogen atoms are bifurcated, whereas one hydrogen is monofurcated. Similarly, the bridging oxygen atoms and chloride ions have two hydrogen bond interactions each, whereas the non-bridging permanganate oxygen has only one hydrogen bond. The strongest hydrogen bond interaction can be found between the six ammonia ’B’ hydrogen atoms and six non-bridging permanganate oxygen atoms.
The hydrogen atomic positions are uncertain because the structures contain transition metals with high electron densities. Nonetheless, hydrogen atoms were generated in assumed geometries and included in structure factor calculations to better describe the real electron densities and to get a more realistic image in the Hirshfeld surface calculations. However, the hydrogen positions are not further discussed because of the uncertainty of their real coordinates. Thus, in our discussion of hydrogen bonds, only the data of the donor and acceptor atoms are considered. The hydrogen atomic positions are doubled by a mirror plane running through the ammonia nitrogen and the Co-N bond that resulting in six hydrogen positions with 50% occupancies each. Because of the uncertainty of the hydrogen atomic positions, we do not discuss the disorder of the ammonia hydrogen atoms.
Upon increasing the temperature from 100 K to 273 K, the elongation (weakening) of the hydrogen bonds is not equal in the five types of N-H⸱⸱⸱X (X = O, Cl) interactions. The smallest change (0.018/0.018 Å and 0.61/0.64%) belongs to the N-H⸱⸱⸱Cl interactions, whereas the longest ones belong to the coordinated oxygen atoms (0.025/0.025 Å and 0.80/0.80%), and the hydrogen bonds belonging to non-coordinated oxygen atoms change between these two values (0.022Å/0.74%). To find the changes in intermolecular interactions within the crystal structure at 100 K and 273 K, a Hirshfeld surface analysis was performed. The Hirshfeld surface method divides the volume of the crystal into two distinguishable regions: (1) where the sum of the electron densities contributed from a selected molecule(s) is larger, and (2) where the sum of the electron densities contributed from a selected molecule(s) is smaller than the contribution from other atoms(ions) located in the crystal. The distances of the nearest internal and external atoms to the surface, di and de, respectively, and the sum of these two values (normalized by the corresponding van der Waals radii (dnorm)), may be used to visualize the interactions within the crystal structures (Figure 4). The Hirshfeld surface analysis results (Figure 4 and Figure 5) of compound 1 at 100 K and 273 K showed that minor but defined changes occur in the hydrogen bond system and, accordingly, these small changes induce only a small endothermic heat effect in the DSC curve.
In general, the changes are minor; however, the relative areas of white (no interaction) and blue (weak interaction) are higher at 273 K than at 100 K, according to the weakening of all hydrogen bond interactions. The Hirshfeld surface analysis for the three kinds of interactions (H⸱⸱⸱H, H⸱⸱⸱O and H⸱⸱⸱Cl) can be summarized as follows: The area of color parts are 161.90 and 150.7 Å2 (165.9% and 158.9%), and the distributions of interactions between H-H, H-O and H-Cl interactions were found to be 27.40/46.00/26.60% and 25.60/45.90/28.50% at 100 K and 273 K, respectively.

2.2. Correlation Analysis of Compound 1

Experimental vibrational spectroscopic studies were performed at room temperature (IR, far-IR, and Raman), but Raman spectra were also recorded at liquid N2 temperature with 785 nm and 532 nm excitations (Figure 6 and ESI Figure S5).
The correlation analysis was performed by the “decomposition” of compound 1 into cationic (Co3+, K+), anionic (Cl− and MnO4−), and neutral (NH3) structural elements (Figure 7 and Figure 8 and ESI Figures S6 and S7). There is only one type of permanganate anion in the crystal lattice of compound 1 (trigonal, Z = 3, the primitive cell contains 1 formula unit (Z/3)).
According to the C3v site symmetry of the permanganate ion (the isolated permanganate ion has Td symmetry), six internal Raman (Ag(ν1,ν3,ν4) and Eg(ν2,ν3,ν4) and IR bands (Au(ν1,ν3,ν4) and Eu(ν2,ν3,ν4)) for each can be expected. The Eg and E2u modes are doubly degenerate. Altogether, six bands due to internal MnO4– vibrations are expected in the Raman (all of gerade symmetry) and six also in the IR (the latter are of ungerade symmetry). The symmetric stretching (ν1) and symmetric deformation (ν2) modes are active only in the Raman and IR spectra, respectively. Altogether, there are 18 vibrational degrees of freedom. All external gerade modes are Raman active, A2u and Eu modes are IR active, whereas A1u are IR inactive. A total of 12 vibrational degrees of freedom for the external modes (six for librations and 6 for hindered translations) can be expected. The correlation analysis results for the chloride ions are given in ESI Figure S6. The IR and Raman bands of the permanganate ion in compound 1 and their assignments are given in Table 4.
The coordination of the permanganate ions to potassium ions shifts the corresponding wave numbers as compared to the usual permanganate [87,88]. The doublet of the strong antisymmetric stretching Mn-O mode (νas) consists of a high and a low-intensity component; the low-intensity component is located at 925 cm−1. The ν1 (νs) symmetric stretching mode of the isolated tetrahedral permanganate ion is IR inactive and can become IR active due to distortion of the symmetry into C3v [87,88]. However, this band is expected to be a weak one. The νs(Mn-O) mode is the strongest band in the Raman spectrum of compound 1 and other permanganates [89] (Figure 7a,b); thus, the symmetric stretching Mn-O mode in the IR spectrum, which can be expected as a weak singlet in the IR spectrum, probably completely coincides with the wide rocking mode of the Co-NH3 fragments centered at 830 cm−1 (Figure 6c). The antisymmetric stretching and deformation modes appeared as doublets at −130 °C in the Raman spectra recorded with 532 nm excitation. The νas(Mn-O) modes, however, are singlets at −80 °C and 25 °C. The resonance Raman effect was observed in the solid compound 1 at excitation of 785 nm, when, with decreasing intensity, the overtones of ν1(Mn-O) were observed at 1684 (2ν1), 2525 (3ν1) and 3363 (4ν1) cm−1 [89,90,91]. The external (translation) modes of two Cl− anions (six vibrational degrees of freedom) consist of a normal singlet and a doubly degenerate singlet in both the IR and Raman spectra. The A1g and Eg modes are Raman, whereas the A1u and Eu modes are IR active. Compound 1 is very sensitive to laser excitation and decomposes fast, especially at irradiation with a 532 nm laser, even at −80 °C. No Raman bands were observed in the low-wavenumber region, which could be attributed to the K⸱⸱⸱Cl modes, but in the IR spectrum, at around 140 cm−1, the complex band may contain the vibrational mode belonging to K⸱⸱⸱Cl interactions, together with other translational modes [92].

2.3. Vibrational Spectroscopic Evaluation of Cation Modes in Compound 1

A correlation analysis of the cobalt(III) ion and ammonia ligands of hexaamminecobalt(III) cations in compound 1 revealed a series of ammonia ligand vibrational modes (six equivalent ammonia molecules in one symmetric octahedral CoN6 skeleton) (Figure 8). The correlation analysis results regarding the external (translation) mode of the potassium cation are given in ESI Figure S7. The band assignments of the isolated symmetric complex hexaamminecobalt(III) cation in compound 1, based on normal coordinate analysis and quantum chemical calculations [38,42,93,94], are given in the Cif files of compound 1.
There are 12 internal Raman and 12 internal IR modes, (4A1g, 2A2g, 6Eg and 2A1u, 4A2u, 6Eu, respectively). The site symmetry is Cs, and the Eg and Eu are doubly degenerate representations. There are 18 vibrational degrees of freedom for hindered translations and hindered rotations for the 6 NH3 molecules each (Figure 8). The hindered translations of one kind of Co3+ and K+ cations are IR active, while Eu is doubly degenerate. The antisymmetric and symmetric N-H stretching modes of the six equivalent ammonia ligands of the hexaamminecobalt(III) cation appeared as a singlet at 3267 and 3136 cm−1, respectively [38,42,93], in the IR spectrum. The antisymmetric and symmetric deformation modes were at 1600 cm−1 as a singlet and 1342/1320 cm−1 as a doublet, respectively. The rocking mode appeared as a medium-intensity band at 830 cm−1. The rocking mode (ρ(NH3)) positions of the coordinated ammonia ligands are sensitive to the strength of the hydrogen bonds in ammonia complexes [38,42,93], and compound 1 shows similar strength of hydrogen bonds mediated by the coordinated ammonia ligands, as in [Co(NH3)6]X3 complexes (X = Cl, Br). The symmetric deformation mode positions are also located near the ds band of these hexaamminecobalt halide complexes. Accordingly, the relative Me-N bond strength parameters (ε), defined by Grinberg for the ammonia complexes [95], are also close to these parameters of [Co(NH3)6]X3 (X = Cl, Br). The N-H modes are very weak in the Raman spectra, but the CoN6 skeleton bands can be assigned in the Raman spectra recorded with 785 nm excitation (Figure 6b). The excitation at 532 nm caused decomposition, even at low temperatures (Figure 6a).
The regular CoN6 octahedron (Oh) has six normal modes. Three of them, [ν1(CoN), Ag], ν2(νas(CoN), Eg) and ν5(δ(CoN), F2g) are Raman, while two others (ν3(νs(CoN), F1u) and ν4(δas(NCoN), F1u)) are IR active modes. The ν6(δ(NCoN), F2u) mode is silent (inactive) in the IR and Raman spectra as well under its original octahedral symmetry. The band positions of this regular octahedral cation were determined based on normal coordinate analysis [38,42,93] (Table 5).
The regular nature of the octahedral skeleton, i.e., the two bands that appeared in the IR spectrum, could unambiguously be assigned as ν3 and ν4 modes [93]. The ν1 and ν2 modes are inactive in the IR, and singlets in the Raman spectra were recorded between −130 °C and room temperature with 785 nm excitation. The ν5 band did not appear in the Raman spectra of compound 1. Altogether, there are 120 vibrational degrees of freedom in the vibrational spectra of compound 1; 54 of these are due to internal vibrations of the MnO4– anions (18) and the NH3 molecules (36), 24 are due to librations of the MnO4– anions (6) and the NH3 molecules (18), and the remaining 42 are due to hindered translations. Three of the latter are due to acoustic modes, one with A2u and one with Eu symmetry.

2.4. UV-VIS Study of Compound 1

The UV-VIS spectrum of the solid compound 1 is given in ESI Figure S8. The expected absorption bands [96,97,98,99,100,101] of four possible d-d transitions belong to [Co(NH3)6]3+ cations (Table 6), and the CT bands of the permanganate anions are partially overlapped [38,42,87]. The ground state of the low-spin central CoIII ion in [Co(NH3)6]3+ is t2g6 (1A1g). The excited electron (t2g5eg) spans with the 3T1g + 1T1g + 1T2g + 3T2g terms. The energies of the triplet states are lower than those of the singlets. The spin-allowed transitions (singlets) are expected to be weak bands [96,97,98,99,100,101]. The experimental UV-VIS bands are given in Table 6.
Two spin-allowed transitions (1A1→1T1 and 1A1→1T2) of the octahedral Co(NH3)63+ cation were detected in the UV spectrum of compound 1. The visible region of the UV-VIS spectrum of compound 1 consists of bands belonging to the CT bands of permanganate ions. The bands observed at 266 nm and 232 nm belong to the 1A1→1T1 and 1A1→1T2 cation and 1A1-1T2 (3t2-2e) and 1A1-1T2 (t1-4t2) permanganate ion transitions (259 nm and 227 nm for KMnO4, respectively) [2]. The 1A1-1T2 (t1-2e) transition of permanganate was assigned at 524 nm and 506 nm, whereas the bands at 485 nm and 568 nm (500 nm and 562 nm for KMnO4 in ref. [2]) may belong to both permanganate ions and cation transitions (Table 6). Similarly, the 1A1-1T1 (t1-2e) transition of the permanganate ion and the 1A1→5T2 transition of the hexaamminecobalt(III) cations also coincides (the permanganate bands were found at 720 and 710 nm for KMnO4 and [Agpy2]MnO4, respectively [7]).

2.5. Thermal Behavior of Compound 1

Compound 1 decomposes on heating with a strong explosion. The DSC curves (recorded in argon and O2 atmospheres) show that the first decomposition step (120 °C) is exothermic (ESI Figure S9), which reveals the direct role of atmospheric oxygen in initiating the decomposition processes. The simple ammonia ligand loss should be endothermic; thus, the exothermic reaction suggests the appearance of a redox reaction, as found in some other transition metal permanganate complexes containing ammonia ligands [3,15,16,17,18,102]. The second decomposition step consists of two and one part under inert and O2 atmospheres, respectively. Surprisingly, the reaction heat is greater in the Ar atmosphere than in O2. Due to the oxygen deficiency under the inert atmosphere (max. 8 oxygen atoms versus 6 NH3 ligands in compound 1), and since the ammonia was formally the only reducing component (chloride ions may also be oxidized into chlorine by CoIII and permanganate ions, but the chlorine formed is reduced back into chloride ions by ammonia as a reducing agent; see below), the decrease of the reaction heat means that in addition to H2O as an oxidation product of ammonia with exothermic heat, some N-containing oxidation products having endothermic heat upon formation (NO or N2O, ΔHf298 = 90 and 82 kJ/mol, respectively) should form. The readily accessible external oxygen might facilitate the formation of these products, and the exothermic decomposition reaction heat found under the Ar atmosphere is suppressed due to the conversion of a larger part of NH3 into NO or N2O in O2 than under an inert atmosphere (ESI Table S1). Since the decomposition temperatures are not changed due to this secondary oxidation process with gaseous oxygen, it can be assumed that the decomposition proceeds in the solid phase in both atmospheres, without the incorporation of the external oxygen, and that the gaseous intermediates formed are oxidized only by the external O2, which does not alter the decomposition temperature, but has a great influence on the reaction heat.
The TG curve of compound 1 in an inert atmosphere showed 43.9% overall mass loss, which corresponds to the loss of all six ammonia (as ammonia or its oxidized form) (ESI Figure S10) molecules and some oxygen- and chlorine-containing gaseous products, with the formation of KCl and CoMn2O4. The TG-MS studies confirmed the formation of HCl, H2O, and NOx (ESI Figure S10). The solid decomposition intermediate that formed at 150 °C consists of an amorphous mixture and crystalline KCl. The amorphous Co and Mn containing residue with CoMn2O4 nominal composition started to crystallize at 250 °C (ESI Figure S11a), which was completed at 500 °C (ESI Figure S11a). The TG-MS studies performed under argon unambiguously showed the solid phase oxidation of ammonia into water by permanganate ions, because the hydrogen and oxygen in water may only be subtracted from ammonia and permanganate ions, respectively. The presence of HCl, as detected by TG-MS, might be attributed to a complex process consisting of:
(a)
the oxidation of chloride ions by CoIII into chlorine [38,41,42,103,104]
(b)
the reaction of chlorine and ammonia to form HCl and N2
(c)
the reaction of HCl and ammonia into NH4Cl, and the dissociation of the sublimed ammonium chloride into NH3 and HCl in a vacuum, which were detected by TG-MS.
The IR spectrum of the decomposition residue prepared at 150 °C (below the temperature of the second decomposition step) confirmed the complete consumption of permanganate ions (ESI Figure S12a). The IR spectrum of this decomposition intermediate contains bands that show the presence of N-H and N-O bond-containing species, together with some Co-O or Mn-O signals in the low wavenumber region. The aqueous leaching of this intermediate with subsequent evaporation to dryness resulted in a mixture. PXRD study of this dry material showed the presence of hydrated Co(NO3)2, KNO3, and KCl. No NH4NO3 peaks were detected (ESI Figure S11b). The IR bands of the aqueous leachate showed the same but resolved bands as the unleached material, except for the low wavenumber metal–oxygen modes (ESI Figure S12b). The observed bands belonged to the symmetric and antisymmetric stretching (3421, 3361, 3272, and 3197 cm−1) and deformation (1396 and 1609 cm−1, respectively) modes of the ammonium ion. The presence of ammonium ions was confirmed by the appearance of typical ν2 + ν4 combination bands at 2825 cm−1. The band at 1359 cm−1 belongs to the νas(N-O) mode of the nitrate ion (ESI Figure S12b). Since only the nitrate anion is present, but no NH4NO3 was detected, the only non-IR active anion to neutralize the charge of the ammonium ion, the ammonium salt of which is soluble in water, is the chloride ion. Thus, NH4Cl might appear in the mixture.
Regarding the anomaly in the DSC results, the TG-MS results of gaseous products were analyzed in detail. Water and ammonia evolved together in the inert atmosphere (m/z = 18, H2O+, and m/z = 15, NH+), due to the insufficient amount of oxygen in compound 1 to oxidize all NH3 into H2O and N2/NOx. Both NO and N2O were detected in the experiments done under argon or air atmosphere; however, their amount was found to be substantially higher in air than in an inert atmosphere, and the NO/N2O ratio was found to be >1 in argon, whereas that was <1 under oxidative atmosphere. These results confirm our assumption about the role of external oxygen in the formation of endothermic N-oxides in larger amounts in an air than inert atmosphere.
The presence of CoII, HCl, H2O, and N-oxides as oxidation products, together with the presence of nitrate ions and water, leads us to conclude that the first step of the decomposition is a solid phase quasi-intramolecular redox reaction. The initial decomposition intermediates decompose further in subsequent steps, resulting in the formation of KCl and CoMn2O4 (ESI Figure S11).
To prepare catalyst precursors, a safe decomposition route had to be found to decompose compound 1 without explosion. Thus, we studied its thermal decomposition under boiling toluene (b.p. 110 °C) to absorb the exothermic reaction heat by the evaporation of toluene and prevent the overheating and initiation of an explosion-like decomposition reaction. The decomposition product was studied by PXRD and IR (ESI Figure S11c and Figure S12c, respectively), then washed with water, and the aq. leachate was evaporated. Then, the crystalline phases were studied. The post-crystallization of the decomposition products was studied without aq. washing at 300 and 500 °C as well.
The decomposition reaction of compound 1 in toluene did not result in direct KCl formation (ESI Figure S11c). However, the treatment of the decomposition residue with water resulted in the crystallization of KCl. This showed that potassium and chloride ions belonged to different species in the primarily formed intermediates, and KCl formed from them only after their dissolution in water. The other isolated salt from the aqueous leachate was cobalt(II) nitrate hexahydrate. The formation of NH4Cl and cobalt(II) nitrate (see above) in the reaction of CoIII and chloride ions in the presence of ammonia ensures an acidic NH4Cl solution during the aqueous leaching of the decomposition product, the reaction of which with a K-containing basic material resulted in the formation of KCl. The IR spectrum of the aqueous leachate showed that the decomposition in boiling toluene in 2 h was not complete, and thus, the reaction time had to be increased to 4 h.
The sample prepared under toluene was heated at 500 °C and a nanosized tetragonal CoMn2O4 spinel was found to be formed with 19 nm crystallite size, determined from the PXRD by the Scherer method. It was comparable with the crystallite sizes of the CoMn2O4 spinel prepared from compound 1 in the solid phase in the presence of air at 600 °C (25 nm) and with the size of the CoMn2O4 produced from the water-leached sample prepared under toluene with subsequent heating at 500 °C (23 nm). The metal–oxygen IR bands of the spinel structure appeared at 504 cm−1 and 491 cm−1 (ESI Figure S12c). The SEM picture of the tetragonal CoMn2O4 spinel prepared at 500 °C with and without aqueous washing to remove KCl can be seen in Figure 9.
The long needle-like KCl crystals covering the spinel particles were removed completely by aqueous washing at room temperature, and the residue was the tetragonal CoMn2O4 with Co to Mn stoichiometry of 1:2. The catalytic activity of the phase pure and K-ion containing CoMn2O4 samples in Fischer-Tropsch and other fuel-producing reactions will be published in our ongoing paper dealing with the catalytic activity of various Co-Mn oxides with Co to Mn stoichiometry of 1:1-3 and prepared from various permanganate salts of ammonia-complexed cobalt as precursors.

3. Materials and Methods

The compounds containing reducing ligands and oxidizing anions (compounds 1, 2 and 3) are potential explosives; therefore, their handling requires great care.
Cobalt(II) chloride hexahydrate, 25% aq. ammonia, hydrogen peroxide, cc. HCl, ammonium chloride, activated carbon, deuterium oxide, and potassium permanganate were supplied by Deuton-X Ltd., Érd, Hungary.
Hexaamminecobalt(III) chloride was synthesized according to known methods [84,105].
Compound 1 was prepared as follows. 1.78 g (6.65 mmol) of [Co(NH3)6]Cl3 was dissolved in 10 mL of distilled water and heated to 60 °C. Then, a solution of 1.58 g (9.97 mmol) KMnO4 in 10 mL distilled water and heated to 60 °C was slowly added and stirred for five minutes. The solution was left to stand overnight at room temperature. The beautiful purple crystals were filtered off and washed with 50 mL cold (0 °C) distilled water and dried over freshly calcined (900 °C for 2 h) CaO in a desiccator for a day. The yield was 3.10 g (91.6%).
The conductivity of the saturated solution of compound 1 and the potassium permanganate, potassium chloride, and hexaamminecobalt(III) chloride solutions (at equivalent concentrations with the saturated compound 1) were measured with a Jenway 4510 Conductivity meter (Cole Parmer Co., St. Neots, UK) equipped with a glass conductivity probe. The pH was measured with an AD111 pH meter (Adwa Instruments, Budapest, Hungary). The solutions were measured at 24.0 °C.

3.1. Single Crystal X-ray Diffraction

Violet platelet single crystals of K[Co(NH3)6]Cl2(MnO4)2 were measured at 100 K and 237 K, respectively. Intensity data were collected on a RAXIS-RAPID diffractometer (graphite monochromator, image plate detector) [106]. The structures were solved by direct methods [106] (and subsequent difference syntheses). Hydrogen atomic positions were calculated from assumed geometries. Hydrogen atoms were included in the structure factor calculation, but they were not refined. The isotropic displacement parameters of the hydrogen atoms were approximated from the U(eq) value of the atom they were bonded to.
The CCDC deposition numbers of compound 1 are 2362896 (100 K) and 2362897 (273 K).

3.2. Hirshfeld Surface Analysis

A Hirshfeld surface analysis was performed using CrystalExplorer 21.3. Hydrogen bond analysis was performed using Platon software (version 2023.1) [107].

3.3. Powder X-ray Diffraction

The powder XRD patterns of compound 1 were acquired at room temperature with the use of a Bragg-Brentano parafocusing goniometer (Philips Amsterdam, The Netherland), Cu Kα radiation, 1.5406/1.5444 Å, 2θ range of 4–70°, step size was 0.02°, 1 s interval time).

3.4. Vibrational Spectroscopy

Both the IR (Bruker Alpha, Bruker, Ettingen, Germany) and far-IR (Biorad, Budapest, Hungary) spectra of compound 1 were recorded in attenuated total reflectance (ATR) mode with 32 scans and a resolution of 2 cm−1.
The Raman spectra of the prepared materials were recorded from 2000 to 200 cm−1 using a Horiba Jobin-Yvon LabRAM microspectrometer (Horiba Co., Kyoto, Japan) with 785 nm diode laser source (~80 mW) and in the range of 4000–100 cm−1 with an external 532 nm frequency-doubled Nd-YAG (~40 mW). The equipment was coupled to an Olympus BX-40 optical microscope for focusing laser beams. Measurements were taken at both 298 K and 123 K, while the laser beam was focused through a 20× objective, and a D0.6 intensity filter was used, illuminating with 785 nm light to reduce the laser power to 25% to prevent degradation of the compounds. A D1 filter (~10% power) was applied during measurements with 523 nm excitation, as the compound was more sensitive to this energy. A confocal hole (1000 µm) and a monochromator with 950 and 1800 mm−1 groove gratings were utilized for light dispersion, achieving a resolution of 4 cm−1. Exposure times were set to 20–60 s to ensure peak intensity. Low-temperature Raman measurements at 123 K (−150 °C) were conducted using a Linkam THMS600 (Linkam Scientific Instruments, Salfords, UK), temperature control stage cooled by liquid nitrogen.

3.5. UV-Vis Spectroscopy

The UV-VIS diffuse reflectance spectrum (DRS) (Jasco V-670, NV-470 integrating sphere (Jasco, Tokyo, Japan) BaSO4 standard) of compound 1 was recorded between 200 and 800 nm at room temperature.

3.6. Scanning Electron Microscopy

The SEM pictures (JEOL JSM-5500LV(Nanyang University, Singapore) scanning electron microscope) of the decomposition product of compound 1 with and without aqueous washing were recorded with a sample specimen fixed on sample holders (Cu/Zn alloy, carbon tape), which were sputtered with a conductive Au/Pd layer for imaging. SEM studies were performed with a Zeiss EVO40 microscope (Carl Zeiss, Jena, Germany) operating at 20 kV.

3.7. DSC Studies

The DSC measurements above room temperature were done on a Perkin Elmer DSC 7 (Perkin Elmer, Shelton, CT, USA) instrument in an unsealed Al pan, with 3–5 mg sample mass and 5 °C/min heating rate under a continuous 20 cm3 min−1 argon or O2 flow. Low temperature DSC measurements of compound 1 were performed on a Setaram DSC92 (Lyon, France) system in sealed 120 μL aluminum pans, where the reference crucible was empty. Samples were scanned with a 10 °C/min heating rate from −140 °C to 30 °C. Raw measurements were blank corrected and data were processed with Calisto Processing v2.15 (AKTS, Valais, Switzerland).

3.8. Thermal Studies

The TG-MS measurements were carried out on a thermal analyzer (SDT Q600, TA Instruments, New Castle, DE, USA) coupled with a mass spectrometer (HPR20, Hiden Analytical, Cheshire, UK). The data points were collected from room temperature up to 600 °C in an inert (argon) and an oxidative (air) atmosphere, with flow rates = 50 mL/min. In the argon atmosphere, the heating rate was 10 K/min, but in air, it was reduced to 5 K/min and the sample was covered with powdered Al2O3 to prevent its explosion during the measurement. Sample holder/reference: alumina crucible/empty alumina crucible. Sample mass: 1.2–2.7 mg. Selected ions between m/z = 1–71 were monitored in multiple ion detection mode (MID).
The isotherm decompositions were performed in an air atmosphere in a tube with 5 °C/min heating rate and keeping the sample at the given temperature for 2 h. Similarly, 5 g of compound 1 was mixed with 100 mL of toluene, and heated slowly under reflux temperature. Then, the mixture was heated under stirring at reflux temperature for 4 h.

4. Conclusions

A double salt of KCl and the non-existing hexaamminecobalt(III) chloride dipermanganate, [CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞] with unique structural features, including an unprecedented tridentate-bridging coordination mode of permanganate-ion and an eight-coordinated (rhombohedral) chlorido and permanganato ligated potassium ion with isolated regular octahedral hexaamminecobalt(III) cation, was prepared with a yield > 90%.
The crystal structure was determined; the anion is a potassium complex with a polymer structure stabilized by mono and bifurcated N-H⸱⸱⸱Cl and N-H⸱⸱⸱O (bridging and non-bridging) hydrogen bonds of undistorted hexaamminecobalt(III) cations.
Detailed spectroscopic (IR, far-IR, and Raman) studies resulted in the assignment of all normal modes, and the existence of the resonance Raman effect was also detected.
The thermal decomposition products of compound 1 at 500 °C were tetragonal CoMn2O4 spinel and KCl. The decomposition intermediates formed in toluene at 110 °C showed the presence of potassium and chloride containing intermediates, which combined into KCl during the aqueous leaching, together with the formation of cobalt(II) nitrate hexahydrate.
The solid phase redox reactions occurred at the first decomposition step, with the formation of CoII and lower valence manganese oxides, together with nitrate ion containing intermediates.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/molecules29184443/s1, Figure S1: The theoretical and experimental powder X-ray diffractogram of compound 1; Figure S2: The experimental powder X-ray diffractogram of compound 1 prepared at (a) room temperature and (b) at 5 °C; Figure S3: The cryo-DSC curve of compound 1; Figure S4: The comparison of the theoretical PXRD of compound 1 (blue is 100 K, red is 273 K); Figure S5: Far range IR spectra of compound 1; Figure S6: The correlation analysis of the chloride-ion translation modes in compound 1; Figure S7: The correlation analysis of the central K+ and CoIII ions in compound 1; Figure S8: The UV-VIS spectra of compound 1; Figure S9: The DSC curves of compound 1 in (a) oxidative and (b) inert atmosphere; Figure S10: The TG-MS measurements of compound 1 (a) in air and (b) in inert atmosphere; Figure S11: The PXRD of the decomposition products prepared from compound 1 (a) in an air atmosphere, (b) in an air atmosphere without the water-soluble part, and (c) in toluene at reflux temperature with subsequent heat treatment in a furnace in an air atmosphere.; Figure S12: The IR spectra of the decomposition products prepared from compound 1 (a) in an air atmosphere, (b) in an air atmosphere without the water-soluble part, and (c) in toluene at reflux temperature with subsequent heat treatment in a furnace in an air atmosphere.; Table S1: DSC results of compound 1 in Ar and O2 atmospheres at 5 °C/min heating rate.

Author Contributions

Conceptualization, L.K.; formal analysis, V.M.P.; investigation, K.A.B., A.F., B.B.H., L.T., L.B. and F.P.F.; writing—original draft preparation, L.K.; writing—review and editing, Z.H.; visualization, K.A.B.; supervision, L.K., K.A.B. and Z.H. All authors have read and agreed to the published version of the manuscript.

Funding

The research was funded by ÚNKP-21-3, ÚNKP-22-3, and ÚNKP-23-3 New National Excellence Program of the Ministry for Culture and Innovation from the Source of The National Research, Development and Innovation Fund (K.A.B.). B.B.H. acknowledges the financial support of the Ministry of Science, Technological Development and Innovation of the Republic of Serbia (Grants No. 451-03-66/2024-03/200125 & 451-03-65/2024-03/200125).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data are contained with manuscript and Supplementary Materials.

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. Béres, K.A.; Homonnay, Z.; Kótai, L. Hexakis(Urea-O)Iron Complex Salts as a Versatile Material Family: Overview of Their Properties and Applications. ACS Omega 2024, 9, 11148–11167. [Google Scholar] [CrossRef] [PubMed]
  2. Fogaca, L.A.; Kováts, É.; Németh, G.; Kamarás, K.; Béres, K.A.; Németh, P.; Petruševski, V.; Bereczki, L.; Holló, B.B.; Sajó, I.E.; et al. Solid-Phase Quasi-Intramolecular Redox Reaction of [Ag(NH3)2]MnO4: An Easy Way to Prepare Pure AgMnO2. Inorg. Chem. 2021, 60, 3749–3760. [Google Scholar] [CrossRef] [PubMed]
  3. Béres, K.; Homonnay, Z.; Bereczki, L.; Dürvanger, Z.; Petruševski, V.; Farkas, A.; Kótai, L. Crystal Nanoarchitectonics and Characterization of the Octahedral Iron(III)–Nitrate Complexes with Isomer Dimethylurea Ligands. Crystals 2023, 13, 1019. [Google Scholar] [CrossRef]
  4. Bereczki, L.; Fogaça, L.A.; Dürvanger, Z.; Harmat, V.; Kamarás, K.; Németh, G.; Holló, B.B.; Petruševski, V.M.; Bódis, E.; Farkas, A.; et al. Dynamic Disorder in the High-Temperature Polymorph of Bis[Diamminesilver(I)] Sulfate—Reasons and Consequences of Simultaneous Ammonia Release from Two Different Polymorphs. J. Coord. Chem. 2021, 74, 2144–2162. [Google Scholar] [CrossRef]
  5. Béres, K.A.; Sajó, I.E.; Lendvay, G.; Trif, L.; Petruševski, V.M.; Barta-Holló, B.; Korecz, L.; Franguelli, F.P.; László, K.; Szilágyi, I.M.; et al. Solid-Phase “Self-Hydrolysis” of [Zn(NH3)4MoO4@2H2O] Involving Enclathrated Water—An Easy Route to a Layered Basic Ammonium Zinc Molybdate Coordination Polymer. Molecules 2021, 26, 4022. [Google Scholar] [CrossRef]
  6. Franguelli, F.P.; Béres, K.A.; Kótai, L. Pyridinesilver Tetraoxometallate Complexes: Overview of the Synthesis, Structure, and Properties of Pyridine Complexed AgXO4 (X = Cl, Mn, Re) Compounds. Inorganics 2021, 9, 79. [Google Scholar] [CrossRef]
  7. Kovács, G.B.; May, N.V.; Bombicz, P.A.; Klébert, S.; Németh, P.; Menyhárd, A.; Novodárszki, G.; Petrusevski, V.; Franguelli, F.P.; Magyari, J.; et al. An Unknown Component of a Selective and Mild Oxidant: Structure and Oxidative Ability of a Double Salt-Type Complex Having κ1O-Coordinated Permanganate Anions and Three- and Four-Fold Coordinated Silver Cations. RSC Advan. 2019, 9, 28387–28398. [Google Scholar] [CrossRef]
  8. Sajó, I.E.; Bakos, L.P.; Szilágyi, I.M.; Lendvay, G.; Magyari, J.; Mohai, M.; Szegedi, S.; Farkas, A.; Jánosity, A.; Klébert, S.; et al. Unexpected Sequential NH3/H2O Solid/Gas Phase Ligand Exchange and Quasi-Intramolecular Self-Protonation Yield [NH4Cu(OH)MoO4], a Photocatalyst Misidentified before as (NH4)2Cu(MoO4)2. Inorg. Chem. 2018, 57, 13679. [Google Scholar] [CrossRef]
  9. Kótai, L.; Sajó, I.; Jakab, E.; Keresztury, G.; Németh, C.; Gács, I.; Menyhárd, A.; Kristóf, J.; Hajba, L.; Petruševski, V.; et al. Studies on the Chemistry of [Cd(NH3)4](MnO4)2. A Low Temperature Synthesis Route of the CdMn2O4+x Type NOx and CH3SH Sensor Precursors. Z. Anorg. Allg. Chem. 2012, 638, 177–186. [Google Scholar] [CrossRef]
  10. Lazarenko, G.A.; Neokladnova, L.N.; Shablovskaya, S.F. Effect of Metals on the Thermal Decomposition of Cobalt(III) Hexaammine Complexes with a Metal-Containing Anion. Koord. Khimiya 1981, 7, 1485–1488. [Google Scholar]
  11. Lagunova, V.I.; Filatov, E.Y.; Plyusnin, P.E.; Korenev, S.V. In Situ and Ex Situ Studies of Tetrammineplatinum(II) Chromate Thermolysis. Russ. J. Inorg. Chem. 2020, 65, 1566–1570. [Google Scholar] [CrossRef]
  12. Serebrennikova, P.S.; Komarov, V.Y.; Sukhikh, A.S.; Khranenko, S.P.; Zadesenets, A.V.; Gromilov, S.A.; Yusenko, K.V. [NiEn3](MoO4)0.5(WO4)0.5 Co-Crystals as Single-Source Precursors for Ternary Refractory Ni–Mo–W Alloys. Nanomaterials 2021, 11, 3272. [Google Scholar] [CrossRef]
  13. Müller, T.G.; Mogk, J.; Conrad, M.; Kraus, F. Octaammine Eu II and Yb II Azides and Their Thermal Decompositions to the Nitrides. Eur. J. Inorg. Chem. 2016, 2016, 4162–4169. [Google Scholar] [CrossRef]
  14. Domonov, D.; Pechenyuk, S.; Semushina, Y.; Yusenko, K. Solid-State Transformations in Inner Coordination Sphere of [Co(NH3)6][Fe(C2O4)3]∙3H2O as a Route to Access Catalytically Active Co-Fe Materials. Materials 2019, 12, 221. [Google Scholar] [CrossRef]
  15. Yusenko, K.V.; Pechenyuk, S.I.; Vikulova, E.S.; Semushina, Y.P.; Baidina, I.A.; Filatov, E.Y. Isostructurality and Thermal Properties in the Series of Double Complex Salts [M1(NH3)6][M2(C2O4)3]·3H2O (M1 = Co, Ir, M2 = Fe, Cr). J. Truct. Chem. 2019, 60, 1062–1071. [Google Scholar] [CrossRef]
  16. Garkul’, I.A.; Zadesenets, A.V.; Plyusnin, P.E.; Filatov, E.Y.; Asanova, T.I.; Kozlov, D.V.; Korenev, S.V. Zinc(II) and Manganese(II) Oxalatopalladates as Precursors of Bimetallic Nanomaterials. Russ. J. Inorg. Chem. 2020, 65, 1571–1576. [Google Scholar] [CrossRef]
  17. Ilyushin, M.A.; Shugalei, I.V.; Tverjanovich, A.S.; Smirnov, A.V. Influence of the Mechanism of the Initial Stages of the Ligand Decomposition on the Initiating Ability of Cobalt(III) Ammine Tetrazolate Complexes. Russ. J. Gen. Chem. 2020, 90, 640–647. [Google Scholar] [CrossRef]
  18. Li, J.; Zhao, D.; Zhang, L.; Ren, Y.; Yue, L.; Li, Z.; Sun, S.; Luo, Y.; Chen, Q.; Li, T.; et al. Boosting Electrochemical Nitrate-to-Ammonia Conversion by Self-Supported MnCo2O4 Nanowire Array. J. Colloid Interface Sci. 2023, 629, 805–812. [Google Scholar] [CrossRef]
  19. Gavrikov, A.V.; Belova, E.V.; Ilyukhin, A.B.; Koroteev, P.S.; Sadovnikov, A.A. Preparation and Properties of Uncommon Cd-Mn Carboxylate Complexes—per Se and as Precursors for CdMn2O4-based Ceramics. Appl. Organomet. Chem. 2021, 35, e6190. [Google Scholar] [CrossRef]
  20. Packiaraj, S.; Jeyaraj, M.; Chandarasekaran, K.; Rawson, J.M.; Govindarajan, S. Simple and Facile Synthesis of Pure Nanocrystalline Spinel Cobaltite by Thermal Decomposition of Solid Solution Precursors. J. Mater. Sci. Mater. Electron. 2019, 30, 18866–18877. [Google Scholar] [CrossRef]
  21. Kótai, L.; Petruševski, V.M.; Bereczki, L.; Béres, K.A. Catalytic Properties of the Spinel-Like CuxMn3−xO4 Copper Manganese Oxides—An Overview. Catalysts 2023, 13, 129. [Google Scholar] [CrossRef]
  22. Zadesenets, A.V.; Khranenko, S.P.; Shubin, Y.V.; Baidina, I.A.; Korenev, S.V. Complex Salts [Pd(NH3)4](ReO4)2 and [Pd(NH3)4](MnO4)2: Synthesis, Structure, and Thermal Properties. Russ. J. Coord. Chem. 2006, 32, 374–379. [Google Scholar] [CrossRef]
  23. Lee, Y.-G.; Chiao, H.-H.; Weng, Y.-C.; Lay, C.-H. The Influence of the Cu Foam on the Electrochemical Reduction of Carbon Dioxide. Inorganics 2024, 12, 57. [Google Scholar] [CrossRef]
  24. Dhakal, B.; Corbin, B.A.; Sosa Parada, A.; Sakai, J.G.; Felton, E.A.; McDonald, L.T.; Gross, A.J.; Nichol, G.S.; Felton, G.A.N. Manganese(I) Diamine Electrocatalysts: Electrochemical Carbon Dioxide Reduction to Carbon Monoxide. Inorganics 2023, 11, 374. [Google Scholar] [CrossRef]
  25. Makuve, N.; Darkwa, J.; Mehlana, G.; Makhubela, B.C.E. Hydrogenation of Carbon Dioxide to Formate Using a Cadmium-Based Metal–Organic Framework Impregnated with Nanoparticles. Inorganics 2022, 10, 30. [Google Scholar] [CrossRef]
  26. Khattak, Z.A.K.; Ahmad, N.; Younus, H.A.; Ullah, H.; Yu, B.; Munawar, K.S.; Ashfaq, M.; Ali, S.; Shahadat, H.M.; Verpoort, F. Synthesis of 3D Cadmium(II)-Carboxylate Framework Having Potential for Co-Catalyst Free CO2 Fixation to Cyclic Carbonates. Inorganics 2022, 10, 162. [Google Scholar] [CrossRef]
  27. Freindorf, M.; Kraka, E. URVA and Local Mode Analysis of an Iridium Pincer Complex Efficiently Catalyzing the Hydrogenation of Carbon Dioxide. Inorganics 2022, 10, 234. [Google Scholar] [CrossRef]
  28. Tajbakhsh, E.; McKearney, D.; Leznoff, D.B.; Warren, J.J. Heterogenous Preparations of Solution-Processable Cobalt Phthalocyanines for Carbon Dioxide Reduction Electrocatalysis. Inorganics 2023, 11, 43. [Google Scholar] [CrossRef]
  29. Andizhanova, T.; Adilkhanova, A.; Khalimon, A. Homogeneous Metal-Catalyzed Hydrogenation of CO2 Derivatives: Towards Indirect Conversion of CO2 to Methanol. Inorganics 2023, 11, 302. [Google Scholar] [CrossRef]
  30. Moreno, J.; Campagnolo, L.; Boitier, B.; Nikas, A.; Koasidis, K.; Gambhir, A.; Gonzalez-Eguino, M.; Perdana, S.; Van De Ven, D.-J.; Chiodi, A.; et al. The Impacts of Decarbonization Pathways on Sustainable Development Goals in the European Union. Commun. Earth Environ. 2024, 5, 136–150. [Google Scholar] [CrossRef]
  31. Das, S.; Yadav, G.D. Tailored Design of Novel Co0-Coδ+ Dual Phase Nanoparticles for Selective CO2 Hydrogenation to Ethanol. J. Environ. Sci. 2025, 149, 598–615. [Google Scholar] [CrossRef] [PubMed]
  32. Huang, X.; Sun, H.; He, X.; Ruan, Y.; Gan, L. Construction of a Metal–Oxide Interface through Alloy Nanoparticles to Enhance CO2 Electrolysis. New J. Chem. 2024, 48, 2140–2145. [Google Scholar] [CrossRef]
  33. Xiong, B.; Liu, J.; Yang, Y.; Ding, J.; Hua, Z. Tunable Cu–M Bimetal Catalysts Enable Syngas Electrosynthesis from Carbon Dioxide. New J. Chem. 2022, 46, 1203–1209. [Google Scholar] [CrossRef]
  34. Kim, O.A.; Bogdan, T.V.; Koklin, A.E.; Bogdan, V.I. Interaction of Carbon Dioxide with Hydrogen on Supported Fe,Cr-Containing Catalysts. Russ. J. Phys. Chem. B 2022, 16, 1218–1220. [Google Scholar] [CrossRef]
  35. Mansouri, M.; Atashi, H.; Tabrizi, F.F.; Mirzaei, A.A.; Mansouri, G. Kinetics Studies of Nano-Structured Cobalt–Manganese Oxide Catalysts in Fischer–Tropsch Synthesis. J. Ind. Eng. Chem. 2013, 19, 1177–1183. [Google Scholar] [CrossRef]
  36. Mansouri, G.; Mohsen, M. Synthesis and Characterization of Co-Mn Nanocatalyst Prepared by Thermal Decomposition for Fischer-Tropsch Reaction. Iran. J. Chem. Chem. Eng. 2018, 38, 1. [Google Scholar]
  37. Béres, K.A.; Szilágyi, F.; Homonnay, Z.; Dürvanger, Z.; Bereczki, L.; Trif, L.; Petruševski, V.M.; Farkas, A.; Bayat, N.; Kótai, L. Structural, Spectroscopic, and Thermal Decomposition Features of [Carbonatotetraamminecobalt(III)] Iodide—Insight into the Simultaneous Solid-Phase Quasi-Intramolecular Redox Reactions. Inorganics 2023, 11, 68. [Google Scholar] [CrossRef]
  38. Barta, H.; Bayat, N.; Bereczki, L.; Petrusevski, V.; Béres, K.; Farkas, A.; Szilágyi, I.; Kótai, L. Spectroscopic and Structural Characterization of Hexaamminecobalt(III) Dibromide Permanganate. J. Serb. Chem. Soc. 2023, 88, 1237–1252. [Google Scholar] [CrossRef]
  39. Zakeri, M.; Samimi, A.; Khorram, M.; Atashi, H.; Mirzaei, A. Effect of Forming on Selectivity and Attrition of Co-Precipitated Co–Mn Fischer–Tropsch Catalysts. Powder Technol. 2010, 200, 164–170. [Google Scholar] [CrossRef]
  40. Khassin, A.A.; Sipatrov, A.G.; Demeshkina, M.P.; Minyukova, T.P. Partially Hydrated Iron–Chromium Oxide Catalyst for the Fischer-Tropsch Synthesis. React. Kinet. Catal. Lett. 2009, 97, 371–379. [Google Scholar] [CrossRef]
  41. Franguelli, F.P.; Kováts, É.; Czégény, Z.; Bereczki, L.; Petruševski, V.M.; Barta Holló, B.; Béres, K.A.; Farkas, A.; Szilágyi, I.M.; Kótai, L. Multi-Centered Solid-Phase Quasi-Intramolecular Redox Reactions of [(Chlorido)Pentaamminecobalt(III)] Permanganate—An Easy Route to Prepare Phase Pure CoMn2O4 Spinel. Inorganics 2022, 10, 18. [Google Scholar] [CrossRef]
  42. Bereczki, L.; Petruševski, V.M.; Franguelli, F.P.; Béres, K.A.; Farkas, A.; Holló, B.B.; Czégény, Z.; Szilágyi, I.M.; Kótai, L. [Hexaamminecobalt(III)] Dichloride Permanganate—Structural Features and Heat-Induced Transformations into (CoII,MnII)(CoIII,MnIII)2O4 Spinels. Inorganics 2022, 10, 252. [Google Scholar] [CrossRef]
  43. Yang, X.-Z.; Hongtao, Z.; Huo, C.; Liu, H.-Z. Application of Fused Iron Catalysts Fe-M (M=V, Cr, Mn) in Fischer-Tropsch Synthesis. J. Chem. Eng. Chin. Univ. 2018, 32, 1359–1364. [Google Scholar] [CrossRef]
  44. Luo, J.; Zhu, X.; Zhong, Z.; Chen, G.; Hong, Y.; Zhou, Z. Enhanced Catalytic Soot Oxidation over Co-Based Metal Oxides: Effects of Transition Metal Doping. Molecules 2023, 29, 41. [Google Scholar] [CrossRef]
  45. Bae, J.; Shin, D.; Jeong, H.; Choe, C.; Choi, Y.; Han, J.W.; Lee, H. Facet-Dependent Mn Doping on Shaped Co3O4 Crystals for Catalytic Oxidation. ACS Catal. 2021, 11, 11066–11074. [Google Scholar] [CrossRef]
  46. Park, J.E.; Park, E.D. Effects of Surface Area of Co–Mn–O Catalysts on the Selective CO Oxidation in H2. Catal. Lett. 2014, 144, 607–614. [Google Scholar] [CrossRef]
  47. Solt, H.E.; Németh, P.; Mohai, M.; Sajó, I.E.; Klébert, S.; Franguelli, F.P.; Fogaca, L.A.; Pawar, R.P.; Kótai, L. Temperature-Limited Synthesis of Copper Manganites along the Borderline of the Amorphous/Crystalline State and Their Catalytic Activity in CO Oxidation. ACS Omega 2021, 6, 1523–1533. [Google Scholar] [CrossRef]
  48. Bulavchenko, O.A.; Afonasenko, T.N.; Sigaeva, S.S.; Ivanchikova, A.V.; Saraev, A.A.; Gerasimov, E.Y.; Kaichev, V.V.; Tsybulya, S.V. The Structure of Mixed Mn–Co Oxide Catalysts for CO Oxidation. Top. Catal. 2020, 63, 75–85. [Google Scholar] [CrossRef]
  49. Zhao, Z.; Lin, J.; Wang, G.; Muhammad, T. Novel Co-Mn-O Nanosheet Catalyst for CO Preferential Oxidation toward Hydrogen Purification. AIChE J. 2015, 61, 239–252. [Google Scholar] [CrossRef]
  50. More, R.; More, P. Highly Facile Co2+ and Mn3+ Species Supported on Hydroxyapatite Catalyst for Carbon Monoxide Oxidation at a Lower Temperature. Bull. Mater. Sci. 2022, 45, 111–121. [Google Scholar] [CrossRef]
  51. Zhao, H.; Wang, H.; Qu, Z. Synergistic Effects in Mn-Co Mixed Oxide Supported on Cordierite Honeycomb for Catalytic Deep Oxidation of VOCs. J. Environ. Sci. 2022, 112, 231–243. [Google Scholar] [CrossRef]
  52. Sui, C.; Zeng, S.; Ma, X.; Zhang, Y.; Zhang, J.; Xie, X. Research Progress of Catalytic Oxidation of Volatile Organic Compounds over Mn-Based Catalysts—A Review. Rev. Inorg. Chem. 2023, 43, 1–12. [Google Scholar] [CrossRef]
  53. Zhou, H.; Su, W.; Xing, Y.; Wang, J.; Zhang, W.; Jia, H.; Su, W.; Yue, T. Progress of Catalytic Oxidation of VOCs by Manganese-Based Catalysts. Fuel 2024, 366, 131305. [Google Scholar] [CrossRef]
  54. Cui, Y.; Zeng, Z.; Hou, Y.; Ma, S.; Shen, W.; Huang, Z. A Low-Noble-Metal Ru@CoMn2O4 Spinel Catalyst for the Efficient Oxidation of Propane. Molecules 2024, 29, 2255. [Google Scholar] [CrossRef]
  55. Mu, G.; Xie, H.; Jian, Y.; Jiang, Z.; Li, L.; Tian, M.; Zhang, L.; Wang, J.; Chai, S.; He, C. Facile Construction and Enhanced Catalytic Activity of Co-Mn Oxide with Rich Amorphous/Crystalline Interfaces for Propane Oxidation. Sep. Purif. Technol. 2024, 348, 127699. [Google Scholar] [CrossRef]
  56. Zhu, Z.-J.; He, Z.-H.; Wang, S.-W.; Wu, B.-T.; Tian, Y.; Sun, Y.-C.; Wang, K.; Wang, W.; Wang, H.; Liu, Z.-T. Photothermal Catalytic CO2 Oxidative Dehydrogenation of Propane over Co-Mn Bimetallic Oxides Supported on MCM-41 Molecular Sieve. J. Mol. Cat. 2024, 559, 114070. [Google Scholar] [CrossRef]
  57. Wang, Y.; Chen, W.; Zhong, Y.; Zhong, N.; Huang, K. A Study of Microwave-Enhanced Catalytic Degradation of Benzene Using Co-Mn Metal Oxides Combined with Numerical Simulation. Chem. Eng. Process. 2023, 189, 109403. [Google Scholar] [CrossRef]
  58. Huang, R.; Luo, L.; Hu, W.; Tang, Z.; Ji, X.; Chen, L.; Yu, Z.; Zhang, Y.; Zhang, D.; Xiao, P. Insight into the pH Effect on the Oxygen Species and Mn Chemical Valence of Co–Mn Catalysts for Total Toluene Oxidation. Catal. Sci. Technol. 2022, 12, 4157–4168. [Google Scholar] [CrossRef]
  59. Rastegarpanah, A.; Deng, J.; Liu, Y.; Jing, L.; Pei, W.; Wang, J.; Dai, H. Bamboo-like MnO2·Co3O4: High-Performance Catalysts for the Oxidative Removal of Toluene. J. Environ. Sci. 2025, 147, 617–629. [Google Scholar] [CrossRef]
  60. Xie, C.; Li, L.; Zhai, X.; Chu, W. Improved Redox Synthesis of Mn–Co Bimetallic Oxide Catalysts Using Citric Acid and Their Toluene Oxidation Activity. RSC Adv. 2023, 13, 11069–11080. [Google Scholar] [CrossRef]
  61. Huang, Y.; Ye, K.; Li, H.; Fan, W.; Zhao, F.; Zhang, Y.; Ji, H. A Highly Durable Catalyst Based on CoxMn3–xO4 Nanosheets for Low-Temperature Formaldehyde Oxidation. Nano Res. 2016, 9, 3881–3892. [Google Scholar] [CrossRef]
  62. Wang, J.; Zhang, C.; Yang, S.; Liang, H.; Men, Y. Highly Improved Acetone Oxidation Activity over Mesoporous Hollow Nanospherical MnxCo3−xO4 Solid Solutions. Catal. Sci. Technol. 2019, 9, 6379–6390. [Google Scholar] [CrossRef]
  63. Saheli, S.; Rezvani, A.R.; Arabshahi, A.; Dusek, M.; Samolova, E.; Jarosova, M. Synthesis New Co–Mn Mixed Oxide Catalyst for the Production of Light Olefins by Tuning the Catalyst Structure. Appl. Organomet. Chem. 2021, 35, e6038. [Google Scholar] [CrossRef]
  64. Liu, J.; Zhang, Y.; Yan, X.; Wang, Z.; Wu, F.; Fang, S.; Jian, P. Selective Oxidation of o-chlorotoluene to o-chlorobenzaldehyde Catalyzed by (Co,Mn)(Co,Mn)2O4 Catalysts. Can. J. Chem. Eng. 2018, 96, 1746–1751. [Google Scholar] [CrossRef]
  65. Wu, M.; Zhan, W.; Guo, Y.; Guo, Y.; Wang, Y.; Wang, L.; Lu, G. An Effective Mn-Co Mixed Oxide Catalyst for the Solvent-Free Selective Oxidation of Cyclohexane with Molecular Oxygen. Appl. Catal. A Gen. 2016, 523, 97–106. [Google Scholar] [CrossRef]
  66. Yang, F.; Ding, Y.; Tang, J.; Zhou, S.; Wang, B.; Kong, Y. Oriented Surface Decoration of (Co-Mn) Bimetal Oxides on Nanospherical Porous Silica and Synergetic Effect in Biomass-Derived 5-Hydroxymethylfurfural Oxidation. Mol. Catal. 2017, 435, 144–155. [Google Scholar] [CrossRef]
  67. Rao, K.T.V.; Rogers, J.L.; Souzanchi, S.; Dessbesell, L.; Ray, M.B.; Xu, C. (Charles) Inexpensive but Highly Efficient Co–Mn Mixed-Oxide Catalysts for Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid. ChemSusChem 2018, 11, 3323–3334. [Google Scholar] [CrossRef]
  68. Sun, M.; Tang, S.-N.; Chen, Z.-X.; Zhai, L.-F.; Xia, Y.; Wang, S. Mn-Doping-Induced Co 3 O 4 Structural Distortion and Facet Change for Enhanced Electro-Activation of O2 toward Pollutants Removal. ACS EST. Eng. 2024, 4, 1970–1980. [Google Scholar] [CrossRef]
  69. Tao, L.; Zhao, G.; Chen, P.; Zhang, Z.; Liu, Y.; Lu, Y. High-Performance Co-MnOx Composite Oxide Catalyst Structured onto Al-Fiber Felt for High-Throughput O3 Decomposition. ChemCatChem 2019, 11, 1131–1142. [Google Scholar] [CrossRef]
  70. Zhang, W.; Li, F.; Zhang, P.; Zhang, W.; Liu, S.; Lv, C.; Li, K. Coeffect of Co-Mn in Bimetallic Oxide Catalyst for Ultrafast Electrochemical Reduction of Nitrate: Insight into Ion Interaction. Sep. Purif. Technol. 2024, 328, 124962. [Google Scholar] [CrossRef]
  71. Wang, W.; Liu, E.; Hu, Y.; Jiao, L.; Kolla, P.; Liu, Y.; Tang, M.; Luo, J.; Sun, Q.; Chen, S.; et al. Understanding the ORR Electrocatalysis on Co–Mn Oxides. J. Phys. Chem. C 2021, 125, 25470–25477. [Google Scholar] [CrossRef]
  72. Strekalova, S.; Khrizanforov, M.; Budnikova, Y. Evaluation of Transition Metal Catalysts in Electrochemically Induced Aromatic Phosphonation. Molecules 2019, 24, 1823. [Google Scholar] [CrossRef]
  73. Yang, Y.; Peng, H.; Xiong, Y.; Li, Q.; Lu, J.; Xiao, L.; DiSalvo, F.J.; Zhuang, L.; Abruña, H.D. High-Loading Composition-Tolerant Co–Mn Spinel Oxides with Performance beyond 1 W/Cm2 in Alkaline Polymer Electrolyte Fuel Cells. ACS Energy Lett. 2019, 4, 1251–1257. [Google Scholar] [CrossRef]
  74. Xu, H.; Wei, J.; Zhang, K.; Zhang, M.; Liu, C.; Guo, J.; Du, Y. Constructing Bundle-like Co-Mn Oxides and Co-Mn Selenides for Efficient Overall Water Splitting. J. Mater. Chem. A 2018, 6, 22697–22704. [Google Scholar] [CrossRef]
  75. Jiang, Z.-R.; Wang, P.; Zhou, Y.-X.; Wang, C.; Jiang, J.; Lan, Y.; Chen, C. Fabrication of a 3D-Blocky Catalyst (CoMnOx@sponge) via Mooring Co-Mn Bimetallic Oxide on Sponge to Activate Peroxymonosulfate for Convenient and Efficient Degradation of Sulfonamide Antibiotics. J. Chem. Eng. 2022, 446, 137306. [Google Scholar] [CrossRef]
  76. Liangdy, A.; Lee, W.J.; Tonanon, P.; Webster, R.D.; Snyder, S.A.; Lim, T.-T. Unravelling the Synergism of Catalytic Oxidation and Filtration in Co-Mn-Oxide Impregnated Ceramic Membrane for Intensified Degradation of Recalcitrant Micropollutant with Peroxymonosulfate. J. Chem. Eng. 2023, 454, 140075. [Google Scholar] [CrossRef]
  77. Guo, Z.; Li, C.; Gao, M.; Han, X.; Zhang, Y.; Zhang, W.; Li, W. Mn−O Covalency Governs the Intrinsic Activity of Co-Mn Spinel Oxides for Boosted Peroxymonosulfate Activation. Angew. Chem. Int. Ed. 2021, 60, 274–280. [Google Scholar] [CrossRef]
  78. Cheng, X.; Wang, X.; Ma, C.; Wang, J.; Qiao, W.; Ling, L. Facile Synthesis of Schistose-like Co-Mn Oxides for Low-Temperature Catalytic Oxidation of NO with Enhanced SO2/H2O Tolerance. J. Environ. Chem. Eng. 2022, 10, 108457. [Google Scholar] [CrossRef]
  79. Baran, E.J.; Aymonino, P.J. Über Hexamminkobalt(III)-permanganat. Z. Anorg. Allg. Chem. 1968, 362, 215–219. [Google Scholar] [CrossRef]
  80. Henrici-Olivé, G.; Olivé, S. The Role of Alkali Promoters in the Fischer—Tropsch Synthesis. J. Mol. Catal. 1982, 16, 187–193. [Google Scholar] [CrossRef]
  81. Gaube, J.; Klein, H.-F. The Promoter Effect of Alkali in Fischer-Tropsch Iron and Cobalt Catalysts. Appl. Catal. A Gen. 2008, 350, 126–132. [Google Scholar] [CrossRef]
  82. Li, Z.; Yao, N.; Cen, J.; Li, X.; Zhong, L.; Sun, Y.; He, M. Effects of Alkali Metal Promoters on the Structure–Performance Relationship of CoMn Catalysts for Fischer–Tropsch Synthesis. Catal. Sci. Technol. 2020, 10, 1816–1826. [Google Scholar] [CrossRef]
  83. Klobb, T. De Quelques Permanganates Nouveaux. Bull. Soc. Chim. 1887, 47, 240–244. [Google Scholar]
  84. Klobb, T. Contribution à l’étude Des Sels Lutéocobaltiques. Bull. Soc. Chim. Paris 1901, 25, 1022–1031. [Google Scholar]
  85. Song, X.-M.; Huang, X.-Q.; Dou, J.-M.; Li, D.-C. Catena-Poly[[(18-Crown-6)Potassium(I)]-μ-Chlorido-Silver(I)-μ-Chlorido]. Acta Crystallogr. Sect. E Struct. Rep. Online 2007, 63, m2219. [Google Scholar] [CrossRef]
  86. Jentzsch, A.V.; Emery, D.; Mareda, J.; Nayak, S.K.; Metrangolo, P.; Resnati, G.; Sakai, N.; Matile, S. Transmembrane Anion Transport Mediated by Halogen-Bond Donors. Nat. Commun. 2012, 3, 905–913. [Google Scholar] [CrossRef]
  87. Homborg, H. Die Feinstruktur in Den Schwingungs- und Elektronischen Absorptionsspektren von [CrO4]2− und [MnO4]−. Z. Anorg. Allg. Chem. 1983, 498, 25–40. [Google Scholar] [CrossRef]
  88. Müller, A.; Krebs, B. IR-Spektren Kristalliner, Wasserfreier Permanganate, Pertechnetate Und Perrhenate. Z. Naturforschung B 1966, 21, 3–7. [Google Scholar] [CrossRef]
  89. Clark, R.J.H.; Cobbold, D.G.; Stewart, B. Resonance Raman Excitation Profiles for the Totally Symmetric Mode of the Permanganate Ion. Chem. Phys. Lett. 1980, 69, 488–490. [Google Scholar] [CrossRef]
  90. Clark, R.J.H.; Dines, T.J. Resonance Raman Spectrum of the Permanganate Ion in Different Host Lattices. J. Chem. Soc. Faraday Trans. 2 1982, 78, 723. [Google Scholar] [CrossRef]
  91. Kiefer, W.; Bernstein, H.J. The Resonance Raman Effect of the Permanganate and Chromate Ions. Mol. Phys. 1972, 23, 835–851. [Google Scholar] [CrossRef]
  92. Ferraro, J.R. Low-Frequency Vibrations of Inorganic and Coordination Compounds; Springer: Boston, MA, USA, 1971; ISBN 978-1-4684-1811-8. [Google Scholar]
  93. Sacconi, L.; Sabatini, A.; Gans, P. Infrared Spectra from 80 to 2000 cm−1 of Some Metal-Ammine Complexes. Inorg. Chem. 1964, 3, 1772–1774. [Google Scholar] [CrossRef]
  94. Müller, A.; Böschen, I.; Baran, E.J. Über Hexamminmetallchalkogenometallate. Monatsh. Chem. 1973, 104, 821–835. [Google Scholar] [CrossRef]
  95. Grinberg, A.A.; Varshavskii, Y.S. The Frequency of Coordinated Ammonia Deformation Mode and Its Relationship with the Chemical Properties of Transition Metal Ammonia Complexes. In Primenenie Molekulyarnoi Spektroskopii v Khimii; Khimiya: Moscow, Russia, 1966; pp. 104–107. [Google Scholar]
  96. Hendry, P.; Ludi, A. Structure, Reactivity, Spectra, and Redox Properties of Cobalt(III) Hexaamines. Adv. Inorg. Chem. 1990, 35, 117–198. [Google Scholar] [CrossRef]
  97. Mitsutsuka, Y.; Kondo, I.; Nakahara, M. Splitting Parameters in Ligand Field Absorption Bands of Cobalt(III) Ammine Complexes with Chloro or Aqua Ligands. Bull. Chem. Soc. Jpn. 1986, 59, 2767–2771. [Google Scholar] [CrossRef]
  98. Sakiyama, H.; Ishiyama, Y.; Sugawara, H. Trigonally-Compressed Octahedral Geometry of Hexaamminecobalt(III) Complex Cation in Aqueous Solution Investigated from the Electronic Spectra. Spectrosc. Lett. 2017, 50, 111–114. [Google Scholar] [CrossRef]
  99. Wilson, R.B.; Solomon, E.I. Spectroscopic Studies of the Photoactive 4T2g Excited State of Hexaamminechromium(III). Inorg. Chem. 1978, 17, 1729–1736. [Google Scholar] [CrossRef]
  100. Wilson, R.B.; Solomon, E.I. Spectroscopic Studies of Photochemically Important Transition Metal Excited States. 2. The 1T1g, 3T1g, and 5T2g Excited States of Hexaamminecobalt(III). J. Am. Chem. Soc. 1980, 102, 4085–4095. [Google Scholar] [CrossRef]
  101. Benedix, R.; Hennig, H.; Nieke, C. NDDO/CI Calculations of the Electronic Spectra of Cobalt(III) Ammine Complexes. Inorganica Chim. Acta 1990, 172, 109–112. [Google Scholar] [CrossRef]
  102. Mehrotra, R.N. Review on the Chemistry of [M(NH3)n](XO4)m (M = Transition Metal, X = Mn, Tc or Re, n = 1–6, m = 1–3) Ammine Complexes. Inorganics 2023, 11, 308. [Google Scholar] [CrossRef]
  103. Béres, K.A.; Homonnay, Z.; Barta Holló, B.; Gracheva, M.; Petruševski, V.M.; Farkas, A.; Dürvanger, Z.; Kótai, L. Synthesis, Structure, and Mössbauer Spectroscopic Studies on the Heat-Induced Solid-Phase Redox Reactions of Hexakis(Urea-O)Iron(III) Peroxodisulfate. J. Mater. Res. 2023, 38, 1102–1118. [Google Scholar] [CrossRef]
  104. Simmons, E.L.; Wendlandt, W.W. The Thermal Decomposition of Metal Complexes—XVIII Intermediates Formed in the Decomposition of Hexamminecobalt (III) Chloride. J. Inorg. Nucl. Chem. 1966, 28, 2187–2191. [Google Scholar] [CrossRef]
  105. Jörgensen, S.M. VIII. Ueber Die Luteokobaltsalze. J. Prakt. Chem. 1887, 35, 417. [Google Scholar] [CrossRef]
  106. Rigaku. CrystalClear SM; Rigaku Corporation: Tokyo, Japan, 2008. [Google Scholar]
  107. Spek, A.L. Single-Crystal Structure Validation with the Program PLATON. J. Appl. Crystallogr. 2003, 36, 7–13. [Google Scholar] [CrossRef]
Molecules 29 04443 g001
Figure 1. (a) Structure and labeling of compound 1; hydrogen atoms are omitted for clarity (ellipsoid representation, thermal ellipsoids are drawn at the 50% probability level); hydrogen bonds are represented by light blue dashed lines. (b) Coordination of the anions around the potassium ions (polyhedral representation, hydrogen atoms are omitted for clarity; the potassium coordination sphere is represented by a dark violet polyhedron, permanganate anions by a light violet tetrahedron, and chloride ions by light green balls). (c) The coordination sphere of the potassium central ion (dark violet ball) showing the symmetry elements (glide planes: violet lines; mirror planes: light blue lines; three-fold screw axes: yellow triangles; three-fold roto-inversion axes: yellow dots), potassium is axially coordinated by chloride anions (green ball) and equatorially coordinated by permanganate ions (oxygen: red; manganese: light violet). (d) The potassium coordination sphere is shown from the direction perpendicular to the c axis with O-K-O and O-K-Cl bond angles.
Figure 1. (a) Structure and labeling of compound 1; hydrogen atoms are omitted for clarity (ellipsoid representation, thermal ellipsoids are drawn at the 50% probability level); hydrogen bonds are represented by light blue dashed lines. (b) Coordination of the anions around the potassium ions (polyhedral representation, hydrogen atoms are omitted for clarity; the potassium coordination sphere is represented by a dark violet polyhedron, permanganate anions by a light violet tetrahedron, and chloride ions by light green balls). (c) The coordination sphere of the potassium central ion (dark violet ball) showing the symmetry elements (glide planes: violet lines; mirror planes: light blue lines; three-fold screw axes: yellow triangles; three-fold roto-inversion axes: yellow dots), potassium is axially coordinated by chloride anions (green ball) and equatorially coordinated by permanganate ions (oxygen: red; manganese: light violet). (d) The potassium coordination sphere is shown from the direction perpendicular to the c axis with O-K-O and O-K-Cl bond angles.
Molecules 29 04443 g001
Molecules 29 04443 g002
Figure 2. The unit cell of K[Co(NH3)6]Cl2(MnO4)2 (polyhedral and ball and stick representations; hydrogen atoms are omitted for clarity. Cobalt(III)hexamine complex cations are indicated by violet octahedra; potassium ions: dark violet balls; chloride ions: green balls; manganese: light violet balls; oxygen: red balls).
Figure 2. The unit cell of K[Co(NH3)6]Cl2(MnO4)2 (polyhedral and ball and stick representations; hydrogen atoms are omitted for clarity. Cobalt(III)hexamine complex cations are indicated by violet octahedra; potassium ions: dark violet balls; chloride ions: green balls; manganese: light violet balls; oxygen: red balls).
Molecules 29 04443 g002
Molecules 29 04443 g003
Figure 3. The packing arrangement in the crystal structure of compound 1 (a) in the direction of the a crystallographic axis and (b) in the direction of the c crystallographic axis (cobalt(III)hexamine complex cations are indicated by violet octahedra; potassium ions: dark violet balls; chloride ions: green balls; manganese: light violet balls; oxygen: red balls).
Figure 3. The packing arrangement in the crystal structure of compound 1 (a) in the direction of the a crystallographic axis and (b) in the direction of the c crystallographic axis (cobalt(III)hexamine complex cations are indicated by violet octahedra; potassium ions: dark violet balls; chloride ions: green balls; manganese: light violet balls; oxygen: red balls).
Molecules 29 04443 g003
Molecules 29 04443 g004
Figure 4. Hirshfeld surfaces of compound 1 at 100 K and 273 K. The change of the volume and the area of the hydrogen bonding interaction is the following: 161.9 and 150.7 Å3; 165.9 and 158.9 Å2 at 100 and 273 K, respectively. Arrows mean the place where changes were observed. The fingerprint plot colors are used to visualize these interactions, according to the relative area of the corresponding di–de pair on the Hirshfeld surface: white—no contribution; blue—small contribution; green—medium contribution; red—large contribution. de, the distance from the point to the nearest nucleus external to the surface, and di the distance to the nearest nucleus internal to the surface.
Figure 4. Hirshfeld surfaces of compound 1 at 100 K and 273 K. The change of the volume and the area of the hydrogen bonding interaction is the following: 161.9 and 150.7 Å3; 165.9 and 158.9 Å2 at 100 and 273 K, respectively. Arrows mean the place where changes were observed. The fingerprint plot colors are used to visualize these interactions, according to the relative area of the corresponding di–de pair on the Hirshfeld surface: white—no contribution; blue—small contribution; green—medium contribution; red—large contribution. de, the distance from the point to the nearest nucleus external to the surface, and di the distance to the nearest nucleus internal to the surface.
Molecules 29 04443 g004
Molecules 29 04443 g005
Figure 5. Hirshfeld surfaces of compound 1 at 100 K and 273 K (A,B) H-Cl; (C,D) H-H; (E,F) H-O. The change of the % of the specific hydrogen bonding interaction is the following: (A,B) H-Cl: 26.60 and 28.50% at 100 and 273 K, respectively; (C,D) H-H: 27.40 and 25.60% at 100 and 273 K, respectively; (E,F) H-O: 46.00 and 45.90% at 100 and 273 K, respectively. Arrows mean the place where changes were observed. The fingerprint plot colors are used to visualize these interactions, according to the relative area of the corresponding di–de pair on the Hirshfeld surface: white—no contribution; blue—small contribution; green—medium contribution; red—large contribution. de, the distance from the point to the nearest nucleus external to the surface, and di the distance to the nearest nucleus internal to the surface.
Figure 5. Hirshfeld surfaces of compound 1 at 100 K and 273 K (A,B) H-Cl; (C,D) H-H; (E,F) H-O. The change of the % of the specific hydrogen bonding interaction is the following: (A,B) H-Cl: 26.60 and 28.50% at 100 and 273 K, respectively; (C,D) H-H: 27.40 and 25.60% at 100 and 273 K, respectively; (E,F) H-O: 46.00 and 45.90% at 100 and 273 K, respectively. Arrows mean the place where changes were observed. The fingerprint plot colors are used to visualize these interactions, according to the relative area of the corresponding di–de pair on the Hirshfeld surface: white—no contribution; blue—small contribution; green—medium contribution; red—large contribution. de, the distance from the point to the nearest nucleus external to the surface, and di the distance to the nearest nucleus internal to the surface.
Molecules 29 04443 g005
Molecules 29 04443 g006
Figure 6. The Raman spectra (recorded with (a) 532 nm and (b) 785 nm laser) and (c) analytical range IR spectra (c) of compound 1.
Figure 6. The Raman spectra (recorded with (a) 532 nm and (b) 785 nm laser) and (c) analytical range IR spectra (c) of compound 1.
Molecules 29 04443 g006
Molecules 29 04443 g007
Figure 7. Correlation analysis results of permanganate ions (internal (a) and external (b) modes) in compound 1.
Figure 7. Correlation analysis results of permanganate ions (internal (a) and external (b) modes) in compound 1.
Molecules 29 04443 g007
Molecules 29 04443 g008
Figure 8. Correlation analysis of NH3 ligands (internal (a) and external (b) modes) in compound 1.
Figure 8. Correlation analysis of NH3 ligands (internal (a) and external (b) modes) in compound 1.
Molecules 29 04443 g008
Molecules 29 04443 g009
Figure 9. The SEM pictures of the final product of compound 1, prepared at 500 °C (a) without and (b) with aqueous leaching.
Figure 9. The SEM pictures of the final product of compound 1, prepared at 500 °C (a) without and (b) with aqueous leaching.
Molecules 29 04443 g009
Table 1. Crystal data and details of the structure refinement of compound 1.
Table 1. Crystal data and details of the structure refinement of compound 1.
Empirical formulaCl6Co3H54K3Mn6N18O24
Formula weight1527.04
Temperature (K)100 (2)273 (2)
Radiation and wavelength (Å)Mo-Kα, λ = 0.71073Cu-Kα, λ = 1.54178
Crystal systemTrigonal
Space groupR—3m
Unit cell dimensions (Å)a = 6.9642 (8)a = 6.9969 (4)
c = 27.6254 (18)c = 27.7558 (12)
Volume (Å3)1160.3 (3)1176.78 (7)
Z1
Density (calculated, Mg/m3)2.1852.155
Absorption coefficient, μ (mm−1)3.32127.013
F(000)762762
Crystal colourViolet
Crystal descriptionPlatelet
Crystal size (mm)0.64 × 0.60 × 0.070.33 × 0.28 × 0.17
Absorption correctionnumericalmulti-scan
Max. and min. transmission0.689/0.9530.152/1.000
Θ-range for data collection3.458 ≤ Θ ≤ 30.499°4.780 ≤ Θ ≤ 68.131°
Index ranges−9 ≤ h ≤ 9; −9 ≤ k ≤ 9; −39 ≤ l ≤ 39−7 ≤ h ≤ 8; −8 ≤ k ≤ 8; −33 ≤ l ≤ 33
Reflections collected18,49213,017
Completeness to 2Θ0.9971.000
Friedel coverage0.0000.000
Independent reflections489 [R(int) = 0.0619]311 [R(int) = 0.1299]
Reflections I > 2σ(I)489305
Refinement methodfull-matrix least-squares on F2full-matrix least-squares on F2
Data/restraints/parameters489/0/27311/0/26
Goodness-of-fit on F21.4521.249
Final R indices [I > 2σ(I)]R1 = 0.0322, wR2 = 0.0798R1 = 0.0585, wR2 = 0.1510
R indices (all data)R1 = 0.0322, wR2 = 0.0798R1 = 0.0593, wR2 = 0.1520
Max. and mean shift/esd0.000; 0.0000.000; 0.000
Largest diff. peak and hole (e·Å−3)0.700; −0.9351.057; −2.305
Table 2. Comparison of characteristic bond lengths (Å), angles (°), and torsions (°) at 100 K and 273 K.
Table 2. Comparison of characteristic bond lengths (Å), angles (°), and torsions (°) at 100 K and 273 K.
Bond Lengths100 K273 K
Mn1—O11.604(4)1.590(6)
Mn1—O21.614(2)1.606(4)
Co1—N11.959(2)1.950(4)
K1—O22.763(2)2.791(4)
K1—Cl13.433(1)3.471(2)
Bond Angles100 K273 K
O1—Mn1—O2110.09(8)110.2(1)
O2—Mn1—O2108.85(8)108.7(2)
Mn1—O2—K1134.9(1)135.0(2)
O2#1—K1—O2#276.59(5)76.40(9)
O2#2—K1—Cl1#364.99(4)65.15(8)
Torsion Angle100 K273 K
O2#4—Mn1—O2-K1120.8(1)120.9(2)
Table 3. Selected hydrogen bond interactions in compound 1.
Table 3. Selected hydrogen bond interactions in compound 1.
NrDonor--H⸱⸱⸱AcceptorSymm. Op.D⸱⸱⸱A, Å
100 K273 KΔ(A)/Δ(%)
1N1—H1A⸱⸱⸱Cl1y, x, −z3.318(3)3.336(5)0.018/0.54
2N1—H1B⸱⸱⸱O1x, y, z2.976(4)2.997(6)0.022/0.74
3N1—H1B⸱⸱⸱O22/3 − x, 1/3 − x + y, 1/3 − z3.138(3)3.164(6)0.025/0.80
4N1—H1C⸱⸱⸱Cl1x, −1 + y, z3.506(2)3.524(4)0.018/0.51
5N1—H1C⸱⸱⸱O22/3 + x − y, 1/3 − y, 1/3 − z3.138(4)3.164(7)0.025/0.80
Table 4. The IR and liq. N2 temperature Raman spectral data of the permanganate ions in compound 1.
Table 4. The IR and liq. N2 temperature Raman spectral data of the permanganate ions in compound 1.
Band/AssignationCompound 1
IR Wavenumber, cm−1Raman Shift
(748 nm Excitation),
cm−1, −130 °C		Raman Shift
(532 nm Excitation),
cm−1, −130 °C
ν1(MnO4), νs(A)830 *845842
ν2(MnO4), δs(E)359343---
ν3(MnO4), νas(F2)925, 904919, 907914, 906
ν4(MnO4), δas(F2)395400, 385398, 383
* Coinciding band with ρ(Co-NH3).
Table 5. The IR and Raman spectral data of the CoN6 skeleton in compound 1.
Table 5. The IR and Raman spectral data of the CoN6 skeleton in compound 1.
ModeIR Wavenumber, cm−1Raman Shifts,
785 nm Excitation, −130 °C
ν1(CoN6)νs-497 *
ν2(CoN6)νas-450
ν3(CoN6)νs503 -
ν4(CoN6)δas318-
ν5(CoN6)δs-not detectable
ν6(CoN6)δ--
* Coinciding band.
Table 6. Wavelengths of the electronic transitions (in nm) of the hexaamminecobalt(III) cation in compound 1.
Table 6. Wavelengths of the electronic transitions (in nm) of the hexaamminecobalt(III) cation in compound 1.
Assignment in O SymmetryCompound 1[Co(NH3)6]Cl2MnO4 [42][Co(NH3)6]Cl3 [101]
1A1→3T1Out of measurement range830833
1A1→5T2708sh727730
1A1→3T2602sh-617
568 *575sh581
1A1→1T1485sh490486
455sh, 432450444
1A1→1T2391375367
345, 326sh343, 330sh324
* Coinciding bands.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Kótai, L.; Béres, K.A.; Farkas, A.; Holló, B.B.; Petruševski, V.M.; Homonnay, Z.; Trif, L.; Franguelli, F.P.; Bereczki, L. An Unprecedented Tridentate-Bridging Coordination Mode of Permanganate Ions: The Synthesis of an Anionic Coordination Polymer—[CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞]—Containing Potassium Central Ion and Chlorido and Permanganato Ligands. Molecules 2024, 29, 4443. https://doi.org/10.3390/molecules29184443

AMA Style

Kótai L, Béres KA, Farkas A, Holló BB, Petruševski VM, Homonnay Z, Trif L, Franguelli FP, Bereczki L. An Unprecedented Tridentate-Bridging Coordination Mode of Permanganate Ions: The Synthesis of an Anionic Coordination Polymer—[CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞]—Containing Potassium Central Ion and Chlorido and Permanganato Ligands. Molecules. 2024; 29(18):4443. https://doi.org/10.3390/molecules29184443

Chicago/Turabian Style

Kótai, László, Kende Attila Béres, Attila Farkas, Berta Barta Holló, Vladimir M. Petruševski, Zoltán Homonnay, László Trif, Fernanda Paiva Franguelli, and Laura Bereczki. 2024. "An Unprecedented Tridentate-Bridging Coordination Mode of Permanganate Ions: The Synthesis of an Anionic Coordination Polymer—[CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞]—Containing Potassium Central Ion and Chlorido and Permanganato Ligands" Molecules 29, no. 18: 4443. https://doi.org/10.3390/molecules29184443

APA Style

Kótai, L., Béres, K. A., Farkas, A., Holló, B. B., Petruševski, V. M., Homonnay, Z., Trif, L., Franguelli, F. P., & Bereczki, L. (2024). An Unprecedented Tridentate-Bridging Coordination Mode of Permanganate Ions: The Synthesis of an Anionic Coordination Polymer—[CoIII(NH3)6]n[(K(κ1-Cl)2(μ2,2′,2″-(κ3-O,O′,O″-MnO4)2)n∞]—Containing Potassium Central Ion and Chlorido and Permanganato Ligands. Molecules, 29(18), 4443. https://doi.org/10.3390/molecules29184443

Article Metrics

Back to TopTop