Next Article in Journal
Exploring the Binding Mechanism of PF-07321332 SARS-CoV-2 Protease Inhibitor through Molecular Dynamics and Binding Free Energy Simulations
Next Article in Special Issue
Role of Combined Na2HPO4 and ZnCl2 in the Unprecedented Catalysis of the Sequential Pretreatment of Sustainable Agricultural and Agro-Industrial Wastes in Boosting Bioethanol Production
Previous Article in Journal
Delivery of Metabolically Neuroactive Probiotics to the Human Gut
Previous Article in Special Issue
Effect of Extreme Ultraviolet (EUV) Radiation and EUV Induced, N2 and O2 Based Plasmas on a PEEK Surface’s Physico-Chemical Properties and MG63 Cell Adhesion
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
IJMS
Volume 22
Issue 17
10.3390/ijms22179123
ijms-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions

by
Daria Bożejewicz
1,*,
Katarzyna Witt
1,
Małgorzata A. Kaczorowska
1,
Włodzimierz Urbaniak
2 and
Borys Ośmiałowski
3
1
Faculty of Chemical Technology and Engineering, UTP University of Science and Technology, 3 Seminaryjna Street, PL 85326 Bydgoszcz, Poland
2
Faculty of Chemistry, Adam Mickiewicz University in Poznań, 8 Uniwersytetu Poznańskiego Street, PL 61712 Poznań, Poland
3
Faculty of Chemistry, Nicolaus Copernicus University in Toruń, 7 Gagarin Street, PL 87100 Toruń, Poland
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2021, 22(17), 9123; https://doi.org/10.3390/ijms22179123
Submission received: 27 July 2021 / Revised: 17 August 2021 / Accepted: 19 August 2021 / Published: 24 August 2021
(This article belongs to the Special Issue Polymeric Materials from Chemistry, Functional and Biological Characterization to Applications)
Browse Figures
Versions Notes

Abstract

:
The work describes the results of the first application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) for the recovery of noble metal ions (Au(III), Ag(I), Pd(II), Pt(II)) from aqueous solutions using two different separation processes: dynamic (classic solvent extraction) and static (polymer membranes). The stability constants of the complexes formed by the L with noble metal ions were determined using the spectrophotometry method. The results of the performed experiments clearly show that 2,6-bis(4-methoxybenzoyl)-diaminopyridine is an excellent extractant, as the recovery was over 99% for all studied noble metal ions. The efficiency of 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier in polymer membranes after 24 h of sorption was lower; the percentage of metal ions removal from the solutions (%Rs) decreased in following order: Ag(I) (94.89%) > Au(III) (63.46%) > Pt(II) (38.99%) > Pd(II) (23.82%). The results of the desorption processes carried out showed that the highest percentage of recovery was observed for gold and silver ions (over 96%) after 48 h. The results presented in this study indicate the potential practical applicability of 2,6-bis(4-methoxybenzoyl)-diaminopyridine in the solvent extraction and polymer membrane separation of noble metal ions from aqueous solutions (e.g., obtained as a result of WEEE leaching or industrial wastewater).

1. Introduction

Solvent extraction (SE), a process of separating metal ions from aqueous solutions by extraction into organic solvents immiscible with water, has been used for many years to recover various metals, both common and rare [1,2,3,4]. This well-established separation method has been widely used as a tool for the recovery of precious metals from different types of industrial waste, including waste electrical and electronic equipment (WEEE) [5,6,7]. This type of waste contains many valuable metals, and its recovery is often more effective than extraction from decreasing ore grades; thus, the term “urban mining” has been introduced [8]. The growing interest in methods of precious metals recovery from waste is related to the various applications of these materials. They can be used as raw materials for high-technology industries (e.g., electronic materials) as well as in pharmaceutics, jewelry, catalysis, etc. Furthermore, the demand for precious metals in industrial applications has significantly increased in the last few years [9,10].
Although extraction is a relatively simple method, the long time required for analysis and the need to use organic solvents (many of which are volatile and toxic) prove to be serious limitations. Moreover, some extractants are not effective or affordable enough [8]. It has been reported by Bulgariu and Bulgariu [11] that many of the disadvantages of classical SE can be minimized by using the aqueous two-phase system in the extraction process. They investigated the extraction of gold(III) in an aqueous PEG(1500)–(NH4)2SO4 two-phase system, using chloride ions as extracting agents. The PEG-based two-phase system they utilized was non-toxic, non-flammable and non-volatile. The obtained results showed that gold(III) was quantitatively extracted (>98%) into the PEG-rich phase in acid media. Another environmentally friendly two-phase extraction system based on polypropylene glycol 425 and sodium chloride has recently been successfully applied for the extraction of Pt(IV) and Pd(II) from diluted hydrochloric acid solutions [12]. Ecologically safe, two-phase aqueous systems have been used to extract various metal ions, not only noble ones. However, the utilization of such systems usually requires time-consuming determination of the appropriate process conditions (e.g., proper concentration of metal ions and other reagents used, temperature, pH) [13].
An alternative to the conventional method of liquid–liquid extraction is the application of membrane processes, e.g., polymer inclusion membranes (PIMs) [14], which can reduce the consumption of solvents. Other advantages of PIMs (a type of liquid membrane in which the liquid phase is held within the polymeric network, usually polyvinyl chloride (PVC) or cellulose triacetate) are their wide range of applications, high efficiency in the extraction of various metal ions, high stability and the possibility of conducting extraction and back-extraction processes [14,15]. It has been shown that the process of metal ion recovery using SE and PIMs depends on many factors, including the metal’s properties, concentration, pH, matrix complexity, etc., but the vital factor in both processes is the correct selection of the chemical compounds binding the metal ions (extractants and carriers, respectively) [15,16]. Hence, many studies conducted in recent years search for new extractants/carriers that would allow for more effective recovery of precious metals from aqueous and acidic solutions (e.g., obtained as a result of leaching of WEEE waste) [17,18]. A variety of chemical compounds, both commercially available carriers (e.g., Cyphos IL 101) and non-standard ones (e.g., niacin), have been used for this purpose [19,20,21,22,23,24]. Often, the application of the same compound as the extractant in SE and as the carrier in PIMs produces different results concerning the recovery of both heavy and noble metal ions [25,26].
This paper describes the results of the application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (shown in Figure 1) for the recovery of noble metal ions such as Au(III), Ag(I), Pd(II) and Pt(II) from aqueous solutions using SE and polymer membrane processes. 2,6-Bis(4-methoxybenzoyl)-diaminopyridine can be considered a heterocyclic amide which due to its structure possesses the ability to form complexes with various metal ions. In previous work, we showed that the presence of oxygen/nitrogen atoms in the molecule of 2,6-bis(4-methoxybenzoyl)-diaminopyridine allows it to form complexes with copper(II) ions; thus, it can be successfully used for the SE recovery of Cu2+ (recovery percentage above 99%) [27]. Despite the ability to form complexes with metal ions, so far 2,6-bis(4-methoxybenzoyl)-diaminopyridine has not been used as an extractant in liquid–liquid extraction designed for the recovery of noble metals ions, nor as a carrier in polymer membranes.

2. Results and Discussion

2.1. The Stability Constants of Complexes Formed by Precious Metal Ions with 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine

For all investigated systems (ligand to chosen metal ion: Au(III), Ag(I), Pd(II) and Pt(II)) the absorption spectra were recorded in various ratios of L:M (Figure 2).
The obtained absorption spectra are characterized by absorption bands together with the isosbestic points in the UV region wavelengths ranging from 200 to 400 nm. Constant changes in the shapes of recorded spectra are related to the creation of new complexes with various ratios of ligand to the metal ion. Based on the above spectra, the stability constants of complexes of 2,6-bis(4-methoxybenzoyl)-diaminopyridine with Au(III), Ag(I), Pd(II) and Pt(II) ions were calculated and are presented in Table 1.
One valent, two valent and three valent metal ions created complexes of ligand to metal ion of type 1:1, 1:2 and 1:3, respectively. The most stable complexes were created by 2,6-bis(4-methoxybenzoyl)-diaminopyridine with platinum(II) ions. Only in the case of palladium(II) was its complex type 1:2 more stable than complex type 1:1, as the rest of the metal ions created exactly the most stable complexes (in which one metal ion is bound to one molecule of ligand). The values of the stability constants of complexes with two and three metal ions were lower. The values of the stability constants of complexes calculated previously with other metal ions were compared with the values obtained in this work and were equal for complex type 1:1 with Cu(II) ion 5.5 [27].

2.2. Classic Solvent Extraction

The dependence of the parameters obtained after the solvent extraction process (i.e., division ratio on the extraction percentage) is shown in Figure 3.
If after the extraction process the sum of the concentration of metal ions in the organic phase is higher compared to the sum of the concentration of metal ions in the aqueous phase, the division ratio (DM) increases. The values of DM impact the extraction percentage (%E), which is why the %E obtained for all extracted metal ions increased proportionally with increasing division ratios. The highest values of %E vs. DM were for the ratio of M:L (metal:ligand) equaling 1:5 for gold, silver and platinum ions, while for palladium this value was the lowest.
Figure 4 shows the extraction percentages obtained for various molar ratios of analyzed noble metal ions and 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L).
Application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine in the SE processes led to the removal of approximately 99% of all noble metal ions from the aqueous solutions. The influence of molar ratios (M:L) on the amount of metal ions removed was less significant. The best (but not much better) results for metal ions recovery were obtained when the M:L ratio was 1:10. For example, the %E of palladium ions was 99.5%, 99.9% and 99.9% when the M:L molar ratios during the extraction were 1:1, 1:5 and 1:10, respectively. The differences were very small. Based on the results of these and previous studies [27], it can be concluded that 2,6-bis(4-methoxybenzoyl)-diaminopyridine is a very effective extractant that might be used for the recovery of various metal ions, including gold, silver, platinum, palladium and copper.

2.3. Membrane Extraction and Back-Extraction Processes

The sorption and desorption of metal ions on/from polymer membranes was conducted according to the method described by Witt et al. [28].
The sorption capacities qt were calculated according to Equation (3) for gold(III), silver(I), palladium(II) and platinum(II) for 24 h sorption processes and are presented in Table 2.
The sorption capacity increased with the time of sorption. The highest qt after 24 h of sorption process was observed for the membrane when the platinum ions were sorbed (qt = 1.7516 mg/g), and the lowest was in the case of silver ions sorption (qt = 0.1080 mg/g).
Figure 5 presents obtained results of %Rs.
The percentage of metal ion removal from the solutions (%Rs) for all metal ions increased following time, and that dependency was similar to the changes of the sorption capacity qt parameter. The %Rs parameter for the investigated metal ions after 24 h of sorption decreased in following order: Ag(I) (94.89%) > Au(III) (63.46%) > Pt(II) (38.99%) > Pd(II) (23.82%). In the case of sorption of silver(I) ions, equilibrium was reached after 6 h. For other metal ions a longer time was needed.
In addition to sorption, the opposite process was also carried out. For desorption of Au(III), Ag(I), Pd(II) and Pt(II) ions from the surface of polymer membranes containing 2,6-bis(4-methoxybenzoyl)-diaminopyridine a solution of 5 mol/dm3 of nitric acid was used. Figure 6 shows the percentage of metal ions desorbed as the sum of metal ions previously adsorbed on the surfaces of the membranes.
As a result of the desorption processes carried out, the metals adsorbed on the membrane surface were transferred into solutions. The metals were recovered into the concentrated solution, as its volume in relation to the solution used for sorption was three times smaller. The highest percentage recovery was observed after 48 h of desorption for silver (97.65%) and gold (96.62%) ions, whereas the lowest was for platinum (66.11%) and palladium (61.74%) ions. This confirms that by using membranes containing 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier it is possible not only to successfully adsorb metal, for example from wastewater, but also to transfer it to another concentrated aqueous phase and use this metal in further production processes.
Figure 7 shows the polymer membranes after the membrane extraction processes and membrane back-extraction processes.
The above photos confirmed the efficiency of desorption processes, as it is clearly seen that metals adsorbed during sorption processes passed from the surfaces of the membranes (Figure 7A) into the solution of nitric acid. The surfaces of the membranes after desorption were colorless (Figure 7B).

3. Comparison of the Efficiency of Studied Processes

The results of the current research have shown that separation methods such as classic solvent extraction and membrane extraction are effective in recovering precious metals from aqueous solutions. The main aim of scientists involved in similar research is to find an effective extractant/carrier that will enable the high recovery of all precious metals. However, among the known extractants/carriers (Table 3), only 2,6-bis(4-methoxybenzoyl)-diaminopyridine enabled the effective recovery of gold, silver, palladium and platinum during the both the solvent extraction and membrane extraction processes.

4. Materials and Methods

4.1. Materials

2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) (Figure 1) was synthesized following the procedure detailed in [27]. This compound is insoluble in water, but it is well soluble in organic solvents, e.g., chloroform, tetrahydrofuran, ethyl acetate or diethyl ether.
The other compounds used in the experiments, such as metal stock solutions with a concentration of 1000 mg/L (Au(III), Ag(I), Pd(II) and Pt(II)), concentrated nitric acid, ammonia, potassium hydroxide, chloroform and methanol were purchased from Avantor (Gliwice, Poland). All the reagents used in this work were of analytical grade and were used without further purification. Double-distilled water was used to dilute concentrated aqueous solutions.
The pH of aqueous solutions was measured using a SevenCompact series pH meter (Mettler Toledo, Greifensee, Switzerland), which was calibrated using commercial technical buffer solutions (Mettler Toledo, Greifensee, Switzerland) having pH values of 2.00, 4.01, 7.00 and 10.00. The metal ion concentration in the aqueous phases was determined using the atomic absorption spectroscopy method (AAS 240FS Spectrometer, Agilent, Santa Clara, CA, USA).

4.2. Determination of Stability Constants of Complexes of Au(III), Ag(I), Pd(II) or Pt(II) with 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine

Stability constants (log K) of complexes of 2,6-bis(4-methoxybenzoyl)-diaminopyridine with Au(III), Ag(I), Pd(II) and Pt(II) ions were determined according to the previously described method [27]. For this purpose, a methanol solution of L with the concentration of 3 × 10−5 mol/dm3 and aqueous solutions of metal ions (M, each with a concentration of 100 mg/L) were prepared. When preparing solutions with different molar ratios of L:M, the appropriate higher amount of metal ion solution was added each time to a constant amount of ligand solution. The absorption spectra of obtained solutions were recorded, and stability constants of the created complexes of L with Au(III), Ag(I), Pd(II) and Pt(II) ions were calculated.

4.3. Separation Processes

The recovery of noble metal ions such as Au(III), Ag(I), Pd(II) and Pt(II) was carried out using 2,6-bis(4-methoxybenzoyl)-diaminopyridine in two different separation processes. The first process was classic solvent extraction (dynamic process), and the second was membrane extraction (static process) (Figure 8). Both processes resulted in separating metal ions from the aqueous phase.
For solvent extraction, 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) was dissolved in an organic solvent (chloroform), while in membrane extraction the ligand was immobilized in an organic polymer membrane.

4.3.1. Classic Solvent Extraction

Classic solvent extraction experiments were performed at 25 ± 0.2 °C. The proper concentration of metal ions in the aqueous solutions was obtained by dilution of stock solutions of metal ions, the concentration of which was 1000 mg/L. The limit of concentration of metal ions in different samples was from 0.0004 to 0.0016 mol/dm3. The stock solution of the 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) had a concentration of 0.008 mol/dm3 in chloroform. The chloroform solution of L was added to the same volume of the aqueous solution. The volume of both phases (aqueous phase and organic phase) was 1100 µL. The molar ratios of the concentration of metal ions in aqueous solution to the ligand in organic solution were 1:1, 1:5 and 1:10, respectively.
Prepared samples were then shaken for one hour. The equilibrium was established after approximately 30 min by visual inspection. Changes in the phase volumes were checked, the phases were then separated, and the pH and metal ion concentration of the aqueous phase were determined. Based on these measurements the parameters of solvent extraction, i.e., the extraction percentage (%E, Equation (1)) and the division ratio (DM, Equation (2)) were calculated.
The extraction percentage is a parameter that takes into account the partition coefficient and the volume of the aqueous (Vaq) and organic (Vorg) phases. The division ratio is the ratio of the sum of the concentrations of all the substances in the organic phase (Σ[M]org) to the sum of the concentrations of all the substances in the aqueous phase (Σ[M]aq) [43].
% E = D M D M + V a q V o r g × 100 %
D M = Σ M o r g Σ M a q

4.3.2. Membrane Extraction Processes

The Preparation of Polymer Membranes

To prepare the membranes, a solution containing 60 wt.% polyvinylchloride (PVC) as support, 20 wt.% a bis(2-ethylhexyl)adipate (ADO) as a plasticizer and 20 wt.% a 2,6-bis(4-methoxybenzoyl)-diaminopyridine as an ion carrier was prepared in 10 cm3 of tetrahydrofuran. Next, the solutions were poured onto ANUMBRA Petri dishes. After slow evaporation of the solvent for 24 h, the resulting polymer membranes (PMs) (Figure 9) were peeled off from the Petri dishes. Through the next 12 h, PMs were immersed in distilled water. The membranes were homogeneous, transparent, flexible and had good strength. The mean thickness of the membranes was determined as described previously [44]. The thickness of the membranes used for Au(III), Ag(I), Pd(II) and Pt(II) ion extraction was approximately 0.265 cm.

Membrane Extraction and Back Extraction Experiments

The circular polymer membranes were immersed in beakers containing one of the noble metal ions, such as Au(III), Ag(I), Pd(II) or Pt(II). The solutions of metal ions (volume 30 cm3) used as feed phase contained 3 mg/L of metal ions (pH solution was from 1.521 to 2.121). During the static processes, the metal ions from the solutions were bound to the surfaces of the membranes (sorption process). Small samples of well-defined volumes were taken from the solutions at regular intervals for 24 h to determine the concentration of metal ions in the solutions.
Analysis of the sorption processes of metal ions on membranes with 20 wt.% of 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier was performed using Equation (3):
q t =   c i − c t m · V
where qt—the sorption capacity (mg/g), V—the volume of the solution (dm3), m—the mass of the membrane (g), and ci and ct—the analytical concentration of metal ions in the solution at the beginning and after a determined period of the sorption process (mol/dm3), respectively [45].
After 24 h of sorption, the percentage of metal ion removal from the solutions (%Rs) was also determined (Equation (4)).
% R s = c 0 − c i c 0 × 100 %
where: c0 and ci denote analytical concentrations of metal ions in the solution at the beginning and after an appropriate period of the sorption process [28].
After extraction processes, the applied polymer membranes were immersed in 10 cm3 5 mol/dm3 HNO3 solutions for 24 h to desorb metal ions from the membrane surfaces. The desorption efficiency (%Rdes) was calculated using Formula (5).
% R d e s = c i c a × 100 %
where ca refers to the initially sorbed concentration of metals during the desorption process [28,46].

5. Conclusions

As a result of the performed separation processes, i.e., dynamic classic solvent extraction (mechanical shaking) and static membrane extraction (polymer membranes) using 2,6-bis(4-methoxybenzoyl)-diaminopyridine, it was found that this compound proved to be more efficient in SE processes. Presumably, shaking has a beneficial effect on the process of binding of noble metal ions by the studied compound (recovery of more than 99% of gold, silver, palladium and platinum ions). However, despite the high efficiency of this process, a relatively large amount of organic solvent (chloroform) was used, and the recovered metal ions remained bound to the extractant in the organic phase. Due to its sustainable chemistry, static membrane extraction appears to be the more advantageous process, despite the lower percentage recovery of metals from solutions. The recovery was the highest for silver (Ag(I) (94.89%)) and gold (Au(III) (63.46%)) ions, whereas for platinum and palladium ions it was much lower (Pt(II) (38.99%), Pd(II) (23.82%)). Moreover, the results of the performed desorption processes showed a high percentage of recovery, e.g., for gold and silver ions over 96% after 48 h. The reduction in the use of toxic solvents is important for economic and environmental reasons. The synthesis of 2,6-bis(4-methoxybenzoyl)-diaminopyridine is relatively cheap and simple. The obtained results show that 2,6-bis(4-methoxybenzoyl)-diaminopyridine may be potentially used in the future on a larger scale. One of the important areas of practical application of the tested compound may be the recovery of noble metal ions from solutions obtained as a result of WEEE leaching. The proposed methods (classic solvent extraction and polymer membrane extraction) may also be useful for the recovery of these metal ions from industrial wastewater.

Author Contributions

Synthesis—B.O.; All analysis, and description of their results—D.B., M.A.K., K.W. and W.U.; Draft writing, review and editing—All authors. All authors have read and agreed to the published version of the manuscript.

Funding

Research co-financed by the Operational Programme PL03 “Improving Environmental Monitoring and Inspection” within the EEA Grants 2009–2014, No. 309/2015/Wn15/MN-xn-03/D.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Nguyen, T.H.; Lee, M.S. A Review on Separation of Gallium and Indium from Leach Liquors by Solvent Extraction and Ion Exchange. Miner. Process. Extr. Metall. Rev. 2019, 40, 278–291. [Google Scholar] [CrossRef]
  2. Shen, L.T.; Tesfaye, F.; Li, X.B.; Lindberg, D.; Taskinen, P. Review of rhenium extraction and recycling technologies from primary and secondary resources. Miner. Eng. 2021, 161, 106719. [Google Scholar] [CrossRef]
  3. Liddell, K. Thermodynamic models for liquid-liquid extraction of electrolytes. Hydrometallurgy 2005, 76, 181–192. [Google Scholar] [CrossRef]
  4. Sarode, D.B.; Attarde, S.B.; Ingle, S.T.; Srivastava, V.; Sillanpaa, M.E.T. Separation and removal of Cu2+, Fe2+, and Fe3+ from environmental waste samples by N-benzoyl-n-phenylhydroxylamine. Environ. Technol. 2015, 36, 521–528. [Google Scholar] [CrossRef]
  5. Meshram, P.; Abhilash; Pandey, B.D. Advanced Review on Extraction of Nickel from Primary and Secondary Sources. Miner. Process. Extr. Metall. Rev. 2019, 40, 157–193. [Google Scholar] [CrossRef]
  6. Sethurajan, M.; van Hullebusch, E.D.; Fontana, D.; Akcil, A.; Deveci, H.; Batinic, B.; Leal, J.P.; Gasche, T.A.; Kucuker, M.A.; Kuchta, K.; et al. Recent advances on hydrometallurgical recovery of critical and precious elements from end of life electronic wastes-a review. Crit. Rev. Env. Sci. Tec. 2019, 49, 212–275. [Google Scholar] [CrossRef] [Green Version]
  7. Ineza, C.; Pearce, B.H.; Begum, N.M.; Luckay, R. The synthesis and use of new amic acid extractants for the selective extraction of Cu(II),Ni(II) and Co(II) from other base metal ions in acidic medium. Sep. Sci. Technol. 2021, 1–15. [Google Scholar] [CrossRef]
  8. Tomizaki, K.; Okamoto, T.; Tonoda, T.; Imai, T.; Asano, M. Selective Gold Recovery from Homogenous Aqueous Solutions Containing Gold and Platinum Ions by Aromatic Amino Acid-Containing Peptides. Int. J. Mol. Sci. 2020, 21, 5060. [Google Scholar] [CrossRef]
  9. Sathuluri, R.R.; Kurniawan, Y.S.; Kim, J.Y.; Maeki, M.; Iwasaki, W.; Morisada, S.; Kawakita, H.; Miyazakiv, M.; Ohto, K. Droplet-based microreactor system for stepwise recovery of precious metal ions from real waste with calix[4]arene derivatives. Sep. Sci. Technol. 2018, 53, 1261–1272. [Google Scholar] [CrossRef]
  10. Xue, D.; Li, T.; Liu, Y.; Yang, Y.; Zhang, Y.; Cui, J.; Guo, D. Selective adsorption and recovery of precious metal ions from water and metallurgical slag by polymer brush Graphene-polyurethane composite. React. Funct. Polym. 2019, 136, 138–152. [Google Scholar] [CrossRef]
  11. Bulgariu, L.; Bulgariu, D. Extraction of gold(III) from chloride media in aqueous polyethylene glycol-based two-phase system. Sep. Purif. Technol. 2011, 80, 620–625. [Google Scholar] [CrossRef]
  12. Zakhodyaeva, Y.A.; Zinov’eva, I.V. Extraction of Pt(IV) and Pd(II) from Hydrochloric Acid Solutions Using Polypropylene Glycol 425. Theor. Found. Chem. Eng. 2021, 55, 282–289. [Google Scholar] [CrossRef]
  13. Zakhodyaeva, Y.A.; Zinov’eva, I.V.; Tokar, E.S.; Voshkin, A.A. Complex Extraction of Metals in an Aqueous Two-Phase System Based on Poly(Ethylene Oxide) 1500 and Sodium Nitrate. Molecules 2019, 24, 4078. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  14. Carner, C.A.; Croft, C.F.; Kolev, S.D.; Inês, M.G.S.; Almeida, G.S. Green solvents for the fabrication of polymer inclusion membranes (PIMs). Sep. Purif. Technol. 2020, 239, 116486. [Google Scholar] [CrossRef]
  15. Kolev, S.D.; Inês, M.; Almeida, G.S.; Cattrall, R.W. Polymer Inclusion Membranes. In Smart Materials for Sensing and Separation; de la Guardia, M., Esteve-Turrillas, F.A., Eds.; John Wiley & Sons Ltd.: Hoboken, NJ, USA, 2019. [Google Scholar] [CrossRef]
  16. Wilson, A.M.; Bailey, P.J.; Tasker, P.A.; Turkington, J.R.; Grant, R.A.; Love, J.B. Solvent extraction: The coordination chemistry behind extractive metallurgy. Chem. Soc. Rev. 2014, 43, 123–134. [Google Scholar] [CrossRef] [Green Version]
  17. Rao, M.D.; Singh, K.K.; Morrison, C.A.; Love, J.B. Challenges and opportunities in the recovery of gold from electronic waste. RSC Adv. 2020, 10, 4300–4309. [Google Scholar] [CrossRef] [Green Version]
  18. Wongsawa, T.; Traiwongsa, N.; Pancharoen, U.; Nootong, K. A review of the recovery of precious metals using ionic liquid extractants in hydrometallurgical processes. Hydrometallurgy 2020, 198, 105488. [Google Scholar] [CrossRef]
  19. Wang, Y.T.; Liu, M.; Tang, N.; Li, S.J.; Sun, Y.; Wang, S.X.; Yang, X.J. Equilibrium and mechanism studies of gold(I) extraction from alkaline aurocyanide solution by using fluorine-free ionic liquids. Rare Met. 2021, 40, 1987–1994. [Google Scholar] [CrossRef]
  20. Witt, K.; Urbaniak, W.; Kaczorowska, M.A.; Bożejewicz, D. Simultaneous Recovery of Precious and Heavy Metal Ions from Waste Electrical and Electronic Equipment (WEEE) Using Polymer Films Containing Cyphos IL 101. Polymers 2021, 13, 1454. [Google Scholar] [CrossRef]
  21. Nag, A.; Islam, M.R.; Pradeep, T. Selective Extraction of Gold by Niacin. ACS Sustain. Chem. Eng. 2021, 9, 2129–2135. [Google Scholar] [CrossRef]
  22. Bonggotgetsakul, Y.Y.N.; Cattrall, R.W.; Kolev, S.D. Recovery of gold from aqua regia digested electronic scrap using a poly(vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP) based polimer inclusion membrane (PIM) containing Cyphos IL 104. J. Membr. Sci. 2016, 514, 274–281. [Google Scholar] [CrossRef]
  23. Nowik-Zając, A.; Zawierucha, I.; Kozłowski, C. Selective removal of silver(I) using polymer inclusion membranes containing calixpyrroles. RSC Adv. 2019, 9, 31122. [Google Scholar] [CrossRef] [Green Version]
  24. Fajar, A.T.N.; Kubota, F.; Firmansyah, M.L.; Goto, M. Separation of palladium(II) and rhodium(III) using a polymer inclusion membrane containing a phosphonium-based ionic liquid carrier. Ind. Eng. Chem. Res. 2019, 58, 22334–22342. [Google Scholar] [CrossRef]
  25. Kubota, F.; Kono, R.; Yoshida, W.; Sharaf, M.; Kolev, S.D.; Goto, M. Recovery of gold ions from discarded mobile phone leachate by solvent extraction and polymer inclusion membrane (PIM) based separation using an amic acid extractant. Sep. Sci. Technol. 2019, 214, 156–161. [Google Scholar] [CrossRef]
  26. Bożejewicz, D.; Witt, K.; Kaczorowska, M.A. The comparison of the removal of copper(II) and zinc(II) ions from aqueous solution using 2,6-diaminopyridine in a polymer inclusion membrane and in a classic solvent extraction. Desalin. Water Treat. 2021, 214, 194–202. [Google Scholar] [CrossRef]
  27. Bożejewicz, D.; Witt, K.; Kaczorowska, M.A.; Ośmiałowski, B. The Copper(II) Ions Solvent Extraction with a New Compound: 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine. Processes 2019, 7, 954. [Google Scholar] [CrossRef] [Green Version]
  28. Witt, K.; Bożejewicz, D.; Kaczorowska, M.A. N,N′-Bis(salicylidene)ethylenediamine (Salen) as an active compound for the recovery of Ni(II), Cu(II), and Zn(II) ions from aqueous solutions. Membranes 2020, 10, 60. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  29. Yoshida, W.; Baba, Y.; Kubota, F.; Kamiya, N.; Goto, M. Extraction and stripping behavior of platinum group metals using an amic-acid-type extractant. J. Chem. Eng. Japan 2017, 50, 521–526. [Google Scholar] [CrossRef]
  30. Alam, M.S.; Inoue, K. Extraction of rhodium from other platinum group metals with Kelex 100 from chloride media containing tin. Hydrometallurgy 1997, 46, 373–382. [Google Scholar] [CrossRef]
  31. Al-Bazi, S.J.; Freiser, H. Phase-transfer catalysts in extraction kinetics: Palladium extraction by dioctyl sulfide and Kelex 100. Inorg. Chem. 1989, 28, 417–420. [Google Scholar] [CrossRef]
  32. De San Miguel, E.R.; Garduno-Garcia, A.V.; Aguilae, J.C.; de Gyves, J. Gold(III) transport polymer inclusion membranes: Efficiency factors and pertraction mechanism using Kelex 100 as carrier. Ind. Eng. Chem. Res. 2007, 46, 2861–2869. [Google Scholar] [CrossRef]
  33. Nowik-Zając, A.; Zawierucha, I.; Kozlowski, C. Selective transport of Ag(I) through a polymer inclusion membrane containing a calix[4]pyrrole derivatives from nitrate aqueous solution. Int. J. Mol. Sci. 2020, 21, 5348. [Google Scholar] [CrossRef]
  34. Akin, I.; Erdemir, S.; Yilmaz, M.; Ersoz, M. Calix[4]arene derivative bearing imidazole groups as carrier for the transport of palladium by using bulk liquid membrane. J. Hazadr. Mater. 2012, 223–224, 24–30. [Google Scholar] [CrossRef] [PubMed]
  35. Cieszynska, A.; Wisniewski, M. Extraction of palladium(II) from chloride solutions with Cyphos IL 101/toluene mixtures as novel extractant. Sep. Purif. Technol. 2010, 73, 202–207. [Google Scholar] [CrossRef]
  36. Mahandra, H.; Faraji, F.; Ghahreman, A. Novel extraction process for gold recovery from thiosulfate solution using phosphonium ionic liquids. ACS Sustain. Chem. Eng. 2021, 9, 8179–8185. [Google Scholar] [CrossRef]
  37. Regel-Rosocka, M.; Rzelewska, M.; Baczynska, M.; Janus, M.; Wisniewski, M. Removal of palladium(II) from aqueous chloride solution with cyphos phosphonium ionic liquids as metal ion carriers for liquid-liquid extraction and transport across polymer inclusion membrane. Physicochem. Probl. Miner. Process. 2015, 51, 621–631. [Google Scholar]
  38. Cieszynska, A.; Wiśniewski, M. Extractive recovery of palladium(II) from hydrochloric acid solutions with Cyphos IL 104. Hydrometallurgy 2012, 113–114, 79–85. [Google Scholar] [CrossRef]
  39. Sarkar, S.G.; Dhadke, P.M. Solvent extraction separation of gold with Cyanex 302 as extractant. J. Chin. Chem. Soc. 2000, 47, 869–973. [Google Scholar] [CrossRef]
  40. Laki, S.; Shamsabadi, A.A.; Kargari, A. Comparative solvent extraction study of silver(I) by MEHPA and Cyanex 302 as acidic extractants in a new industrial diluent (MIPS). Hydrometallurgy 2016, 160, 38–46. [Google Scholar] [CrossRef]
  41. Othman, N.; Noah, N.F.M.; Sulaiman, R.N.R.; Abdullah, N.A.; Bachok, S.K. Liquid-liquid extraction of palladium from simulated liquid waste using phosphinic acid as a carrier. J. Teknol. 2014, 68, 41–45. [Google Scholar] [CrossRef] [Green Version]
  42. Bonggotgetsakul, Y.Y.N.; Cattrall, R.W.; Kolev, S.D. Extraction of gold(III) from hydrochloric acid solutions with a PVC-based polymer inclusion membrane (PIM) containing Cyphos IL 104. Membranes 2015, 5, 903. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  43. Li, X.; Wei, C.; Deng, Z.; Li, C.; Fan, G.; Rong, H.; Zhang, F. Extraction and separation of indium and copper from zinc residue leach liquor by solvent extraction. Sep. Purif. Technol. 2015, 156, 348–355. [Google Scholar] [CrossRef]
  44. Witt, K.; Radzyminska-Lenarcik, E.; Kosciuszko, A.; Gierszewska, M.; Ziuziakowski, K. The influence of the morphology an mechanical properties of polymer inclusion membanes (PIMs) on zinc ion separation from aqueous solutions. Membranes 2018, 10, 134. [Google Scholar] [CrossRef] [Green Version]
  45. Rostamian, R.M.; Heidarpour, S.F.; Mousavi, M. Afyuni, Characterization and sodium sorption capacity of biochar and activated carbon prepared from rice husk. J. Agric. Sci. Technol. 2015, 17, 1057–1069. [Google Scholar]
  46. Ipeaiyeda, A.R.; Tesi, G.O. Sorption and desorption studies on toxic metals from brewery effluent using eggshell as adsorbent. Adv. Nat. Sci. 2014, 7, 15–24. [Google Scholar] [CrossRef]
Ijms 22 09123 g001 550
Figure 1. Structure of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (C21H19N3O4).
Figure 1. Structure of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (C21H19N3O4).
Ijms 22 09123 g001
Ijms 22 09123 g002 550
Figure 2. Absorption spectra of investigated systems of ligand to metal ions in various ratios (L:M).
Figure 2. Absorption spectra of investigated systems of ligand to metal ions in various ratios (L:M).
Ijms 22 09123 g002
Ijms 22 09123 g003 550
Figure 3. The dependence of the division ratio (DM) on the extraction percentage (%E), where the ● is related to the M:L ratio 1:1, the ▲ is related to the M:L ratio 1:5, and the ♦ corresponds to the M:L ratio 1:10. The given values of %E carry ± 0.03 and DM carry ± 0.025.
Figure 3. The dependence of the division ratio (DM) on the extraction percentage (%E), where the ● is related to the M:L ratio 1:1, the ▲ is related to the M:L ratio 1:5, and the ♦ corresponds to the M:L ratio 1:10. The given values of %E carry ± 0.03 and DM carry ± 0.025.
Ijms 22 09123 g003
Ijms 22 09123 g004 550
Figure 4. The extraction percentages obtained for various molar ratios of analyzed noble metal ions and 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L, extractant).
Figure 4. The extraction percentages obtained for various molar ratios of analyzed noble metal ions and 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L, extractant).
Ijms 22 09123 g004
Ijms 22 09123 g005 550
Figure 5. The percentage recovery of metals in the membrane (%Rs) after 24 h with 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier for gold(III), silver(I), palladium(II) and platinum(II) ions. The given values of %Rs carry ± 0.019.
Figure 5. The percentage recovery of metals in the membrane (%Rs) after 24 h with 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier for gold(III), silver(I), palladium(II) and platinum(II) ions. The given values of %Rs carry ± 0.019.
Ijms 22 09123 g005
Ijms 22 09123 g006 550
Figure 6. The sum of desorbed metal ions after 24 and 48 h. The given values of %Rdes carry ± 0.019.
Figure 6. The sum of desorbed metal ions after 24 and 48 h. The given values of %Rdes carry ± 0.019.
Ijms 22 09123 g006
Ijms 22 09123 g007 550
Figure 7. The polymer inclusion membranes containing 2,6-bis(4-methoxybenzoyl)-diaminopyridine after processes: membrane extraction (A), membrane back-extraction (B).
Figure 7. The polymer inclusion membranes containing 2,6-bis(4-methoxybenzoyl)-diaminopyridine after processes: membrane extraction (A), membrane back-extraction (B).
Ijms 22 09123 g007
Ijms 22 09123 g008 550
Figure 8. Scheme of the dynamic and static extraction processes, where L—2,6-bis(4-methoxybenzoyl)-diaminopyridine; (a) dissolved in the organic phase, (b) contained in a polymer membrane; M = Au(III), Ag(I), Pd(II) or Pt(II) ions in the aqueous phase.
Figure 8. Scheme of the dynamic and static extraction processes, where L—2,6-bis(4-methoxybenzoyl)-diaminopyridine; (a) dissolved in the organic phase, (b) contained in a polymer membrane; M = Au(III), Ag(I), Pd(II) or Pt(II) ions in the aqueous phase.
Ijms 22 09123 g008
Ijms 22 09123 g009 550
Figure 9. The polymer membrane with 20 wt.% of 2,6-bis(4-methoxybenzoyl)-diaminopyridine before the membrane extraction process.
Figure 9. The polymer membrane with 20 wt.% of 2,6-bis(4-methoxybenzoyl)-diaminopyridine before the membrane extraction process.
Ijms 22 09123 g009
Table
Table 1. Stability constants of complexes of 2,6-bis(4-methoxybenzoyl)-diaminopyridine with Au(III), Ag(I), Pd(II) and Pt(II) ions in various ratios of L:M.
Table 1. Stability constants of complexes of 2,6-bis(4-methoxybenzoyl)-diaminopyridine with Au(III), Ag(I), Pd(II) and Pt(II) ions in various ratios of L:M.
Metal IonL—C21H19N3O4
(L:M = 1:1)(L:M = 1:2)(L:M = 1:3)
log K1log K2log K3
Au(III)5.5404.8514.607
Ag(I)4.883--
Pd(II)4.9175.398-
Pt(II)5.7715.584-
The given values of the log K carry ± 0.001 tolerance.
Table
Table 2. The changes in sorption capacity of the membranes with 20 wt.% 2,6-bis(4-methoxybenzoyl)-diaminopyridine over time during sorption processes.
Table 2. The changes in sorption capacity of the membranes with 20 wt.% 2,6-bis(4-methoxybenzoyl)-diaminopyridine over time during sorption processes.
Metal Ions
Time [h]		Au(III)
qt [mg/g]		Ag(I)
qt [mg/g]		Pd(II)
qt [mg/g]		Pt(II)
qt [mg/g]
40.37050.03260.02400.3794
60.39860.03880.38300.9588
120.50020.09230.41931.6790
240.93990.10800.64151.7516
The given values of the qt carry ± 0.0015 tolerance.
Table
Table 3. Selected metal ion extractants/carriers used in separation processes (SE, PM) for the recovery of noble metal ions.
Table 3. Selected metal ion extractants/carriers used in separation processes (SE, PM) for the recovery of noble metal ions.
2,6-Bis(4-methoxybenzoyl)-diaminopyridineD2EHAG
Au(III)Ag(I)Pd(II)Pt(II)Ref. Au(III)Ag(I)Pd(II)Pt(II)Ref.
SEXXXX[This work]SE--XX[29]
PMXXXX[This work]PMX---[25]
Kelex 100Calix [4]pyrrole
Au(III)Ag(I)Pd(II)Pt(II)Ref. Au(III)Ag(I)Pd(II)Pt(II)Ref.
SE--XX[30,31]SE-----
PMX---[32]PM-XX-[23,33,34]
Cyphos IL 101Cyphos IL 102
Au(III)Ag(I)Pd(II)Pt(II)Ref. Au(III)Ag(I)Pd(II)Pt(II)Ref.
SEX-X-[35,36,37]SEX-X-[35,36,37]
PM--X-[37]PM--X-[37]
Cyphos IL 104Cyanex 302
Au(III)Ag(I)Pd(II)Pt(II)Ref. Au(III)Ag(I)Pd(II)Pt(II)Ref.
SE--X-[38]SEXXX-[39,40,41,42]
PMX-X-[37,42]PM-----
“X” indicates that the specified extractant/carrier can be used to recover the specified metal ions.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Bożejewicz, D.; Witt, K.; Kaczorowska, M.A.; Urbaniak, W.; Ośmiałowski, B. The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions. Int. J. Mol. Sci. 2021, 22, 9123. https://doi.org/10.3390/ijms22179123

AMA Style

Bożejewicz D, Witt K, Kaczorowska MA, Urbaniak W, Ośmiałowski B. The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions. International Journal of Molecular Sciences. 2021; 22(17):9123. https://doi.org/10.3390/ijms22179123

Chicago/Turabian Style

Bożejewicz, Daria, Katarzyna Witt, Małgorzata A. Kaczorowska, Włodzimierz Urbaniak, and Borys Ośmiałowski. 2021. "The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions" International Journal of Molecular Sciences 22, no. 17: 9123. https://doi.org/10.3390/ijms22179123

APA Style

Bożejewicz, D., Witt, K., Kaczorowska, M. A., Urbaniak, W., & Ośmiałowski, B. (2021). The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions. International Journal of Molecular Sciences, 22(17), 9123. https://doi.org/10.3390/ijms22179123

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop