Next Article in Journal
7,7’-(4,4-Bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b’]dithiophene-2,6-diyl)bis(4-bromobenzo[c][1,2,5]thiadiazole)
Previous Article in Journal
Dimethyl 2-(2,4-Diamino-3-cyano-5H-chromeno[2,3-b]pyridin-5-yl)malonate
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Short Note

6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile

by
Yuliya E. Ryzhkova
*,
Varvara M. Kalashnikova
and
Michail N. Elinson
N. D. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, 47 Leninsky Prospekt, 119991 Moscow, Russia
*
Author to whom correspondence should be addressed.
Molbank 2022, 2022(1), M1309; https://doi.org/10.3390/M1309
Submission received: 8 December 2021 / Revised: 20 December 2021 / Accepted: 22 December 2021 / Published: 23 December 2021
(This article belongs to the Section Organic Synthesis and Biosynthesis)

Abstract

:
The multicomponent reactions are environmentally benign synthetic methods of building-up of complex molecules and several levels of structural diversity for diverse applications. Spirooxindoles are an important synthetic target possessing extended biological activity and drug discovery applications. In this communication, the multicomponent transformation of 5,7-dibromoisatin, malononitrile, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one in EtOH at reflux in the presence of sodium acetate was carefully investigated to give 6′-amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile in excellent yield. The structure of the new compound was established by means of elemental analysis, mass and nuclear magnetic resonance, and infrared spectroscopy.

Graphical Abstract

1. Introduction

Multicomponent reactions (MCRs) are environmentally benign synthetic methods of the building-up of complex molecules and several levels of structural diversity for diverse applications [1]. Performing MCRs is well regarded as one of the potential techniques in achieving the greenness of a chemical process. The advantages of MCRs over multistep synthesis include atom-economy and step-efficiency, which reduce waste generation in particular [2]. MCRs show a very high bond-forming index (BFI) as several non-hydrogen atom bonds are formed in one synthetic transformation [3]. Hence, MCRs are a very promising synthetic instrument today.
The indole ring system is probably the most ubiquitous heterocycle in nature. Owing to the great structural diversity of biologically active indoles, it is not surprising that the indole ring system has become an important structural component in many pharmaceutical agents [4]. The numerous chemical compounds consisting of indole as a core nucleus exhibit such activities as anti-inflammatory [5], anticonvulsant [6], antidiabetic [7], antimicrobial [8], anticancer [9], and others.
Pyrazole is one of the most popular rings in bioactive compounds, including drugs and agrochemicals [10]. Fluorinated pyrazoles play an important role in medicinal chemistry, drug discovery, agrochemistry, coordination chemistry, and organometallic chemistry [11].
Spirooxindoles are an important synthetic target possessing extended biological activity and drug discovery applications. In the modern broad range of pharmaceuticals, spiro compounds are not widely used, and spirooxindoles are absent. At the same time, this type of core is prevalent in a number of spiro leader-compounds and drug candidates with different directions of action [12], such as anti-cancer [13], antitumor [14], and cardiotonic [14]. Therefore, multicomponent synthesis of new spirooxindoles is a promising area of organic chemistry.

2. Results and Discussion

We previously carried out a multicomponent transformation of isatins, malononitrile, and different C-H acids into functionalized spirooxindoles [15,16,17,18]. These reactions were carried out both in solution and in ‘on-solvent’ and ‘solvent-free’ formats.
Now, we wish to report our results on the efficient multicomponent transformation of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 into the previously unknown 6′-amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile 4 in boiling ethanol in the presence of sodium acetate for 1 h, as shown in Scheme 1.
When the reaction was finished, the final compound 4 was directly crystallized in pure form. Compound 4 was synthesized in a 91% yield.
The BFI of this process was three, since three new bonds were formed in one stage, namely 2 C-C bonds, and 1 C-O bonds.
Previously, similar spiro[indole-3,4′-pyrano[2,3-c]pyrazoles] were obtained by a four-component reaction of trifluoacetoacetic ether, hydrazine, isatins, malononitrile, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-ones; however, the isolated residue had to be purified by column chromatography [19]. Spiro[indole-3,4′-pyrano[2,3-c]pyrazoles] with a trifluoromethyl group can inhibit the enzyme Plasmodial serine hydroxymethyltransferase, which makes them promising antimalarial drugs [20].
The structure of compound 4 was confirmed by 1H, 13C and 19F NMR, and IR spectroscopy as well as mass spectrometry data and elemental analysis (Supplementary Materials). Only one set of signals was observed in 1H, 13C, and 19F NMR spectra.
Signals from four carbon atoms in the 13C spectrum (carbons of the pyrazole fragment) are not observed due to too large line broadening caused by the tautomerism of the pyrazole N–H proton (Scheme 2).
Taking into consideration our previous results [16,17] and literature data [19], the following mechanism for the multicomponent transformation of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 was proposed, as shown in Scheme 3.
The first stage of the process is a rapid Knoevenagel condensation with the formation of intermediate 6 with the expulsion of a hydroxide anion [21]. This hydroxide anion instantly catalyzes a rapid Michael addition of electron-deficient intermediate 6 to anion A. Then, the resulting anion B is protonated and undergoes Pinner cyclization. Next, 1,3-proton shift occurs, leading to 6′-amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile 4.

3. Materials and Methods

3.1. General Methods

The solvents and reagents were purchased from commercial sources and used as received. 5,7-Dibromoisatin 1 was obtained from isatin according to the literature [22]. 5-(Trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 was synthesized according to the standard procedure [23].
The melting point was measured with Gallenkamp melting-point apparatus (Gallenkamp & Co., Ltd., London, UK). 1H and 13C NMR spectra were recorded in DMSO-d6 and acetone-d6 with Bruker AM300 spectrometer (Bruker Corporation, Billerica, MA, USA) at ambient temperature. IR spectrum was registered with a Bruker ALPHA-T FT-IR spectrometer (Bruker Corporation, Billerica, MA, USA) in KBr pellets. The MS spectrum (EI = 70 eV) was obtained directly with a Kratos MS-30 spectrometer (Kratos Analytical Ltd., Manchester, UK). For elemental analysis, a 2400 Elemental Analyzer (Perkin Elmer Inc., Waltham, MA, USA) was used.

3.2. Multicomponent Synthesis of 6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile 4

5,7-Dibromoisatin 1 (0.305 g, 1 mmol), malononitrile 2 (0.066 g, 1 mmol), 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 (0.152 g, 1 mmol), and sodium acetate (0.008 g, 0.1 mmol) were refluxed in 3 mL of EtOH for 1 h. After the reaction was completed, the formed solid was filtered, washed with well-chilled ethanol (3 mL × 2 mL), and dried to isolate pure 6′-amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile 4.
6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile (4). White solid; yield 91% (0.460 g); mp = 305–306 °C (decomp.) (from EtOH); FTIR (KBr) cm−1: 3405 (N-H), 3316 (NH2), 3176 (N-H), 2205 (CN), 1715 (C = O), 1654 (C-C Ar), 1163 (C-F), 1147 (C-F). 1H NMR (300 MHz, DMSO-d6):δ 7.51 (d, 4J = 1.4 Hz, 1H, CH Ar), 7.61 (s, 2H, NH2), 7.74 (d, 4J = 1.4 Hz, 1H, CH Ar), 11.19 (s, 1H, NH isatin), 14.43 (br s, 1H, NH pyrazole) ppm; 13C NMR (75 MHz, DMSO-d6): δ 48.4 (C(3)-CN), 55.2 (br s, C(4) spiro), 102.8 (C(7′)-Br Ar), 114.5 (C(5′)-Br Ar), 117.5 (CN), 127.0 (C(4′)H Ar), 134.0 (C(6′)H Ar), 136.0 (C(3a′) Ar), 140.7 (C(7a′) Ar), 161.1 (C(2)-NH2), 177.0 (C = O) ppm (pyrazolone moiety C-signals were not detected due to tautomerism); 19F NMR (282 MHz, acetone-d6): δ –62.62 (s, CF3) ppm; MS (m/z, relative intensity %): 507 [81Br, 81Br, M]+ (26), 505 [81Br, 79Br, M]+ (52), 503 [79Br, 79Br, M]+ (27), 479 [81Br, 81Br, M - CN]+ (63), 477 [81Br, 79Br, M - CN]+ (100), 475 [79Br, 79Br, M - CN]+ (45), 422 [81Br, 81Br, M - C3H3N2O]+ (12), 420 [81Br, 79Br, M - C3H3N2O]+ (25), 418 [79Br, 79Br, M - C3H3N2O]+ (12), 410 [81Br, 81Br, M - C2F3N]+ (15), 408 [81Br, 79Br, M - C2F3N]+ (30), 406 [79Br, 79Br, M - C2F3N]+ (16), 355 [81Br, 81Br, C11H5Br2N3O]+ (3), 353 [81Br, 79Br, C11H5Br2N3O]+ (6), 351 [79Br, 79Br, C11H5Br2N3O]+ (4), 229 [C8H4F3N4O]+ (5), 152 [C4H3F3N2O]+ (3); Anal. calcd. for C15H6Br2F3N5O2: C, 35.67; H, 1.20; N, 13.87%; found: C, 35.72; H, 1.23; N, 13.83%.

4. Conclusions

The title compound, 6′-amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile, was synthesized in excellent yield using the simple and efficient multicomponent approach with available equipment and starting compounds. The previously unknown compound was characterized by spectroscopic methods (NMR, IR and MS-EI) and elemental analysis.

Supplementary Materials

Compound 4 spectra: 1H NMR (Figure S1), 13C NMR (Figure S2), 19F NMR (Figure S3), IR (Figure S4), MS (Figure S5).

Author Contributions

Y.E.R.—conceptualization, spectroscopic analysis and writing the manuscript; V.M.K.—synthesis, spectroscopic analysis; M.N.E.—conceptualization, supervision and writing the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data for the compounds presented in this study are available in the Supplementary Materials of this article.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Gore, R.P.; Rajput, A.P. A review on recent progress in multicomponent reactions of pyrimidine synthesis. Drug Invent. Today 2013, 5, 148–152. [Google Scholar] [CrossRef]
  2. Brahmachari, G. Green synthetic approaches for biologically relevant heterocycles: Advanced synthetic techniques—An overview. In Green Synthetic Approaches for Biologically Relevant Heterocycles (Second Edition), Volume 1: Advanced Synthetic Techniques; Brahmachari, G., Ed.; Elsevier Science Publishing Company, Inc.: Amsterdam, The Netherlands, 2021; Chapter 1; pp. 1–8. [Google Scholar] [CrossRef]
  3. Domling, A.; Wang, W.; Wang, K. Chemistry and biology of multicomponent reactions. Chem. Rev. 2012, 112, 3083–3135. [Google Scholar] [CrossRef] [Green Version]
  4. Humphrey, G.R.; Kuethe, J.T. Practical Methodologies for the Synthesis of Indoles. Chem. Rev. 2006, 106, 2875–2911. [Google Scholar] [CrossRef]
  5. Verma, M.; Tripathi, M.; Saxena, A.; Shanker, K. Antiinflammatory activity of novel indole derivatives. Eur. J. Med. Chem. 1994, 29, 941–946. [Google Scholar] [CrossRef]
  6. Praveen, C.; Ayyanar, A.; Perumal, P.T. Practical synthesis, anticonvulsant, and antimicrobial activity of N-allyl and N-propargyl di(indolyl)indolin-2-ones. Bioorg. Med. Chem. Lett. 2011, 21, 4072–4077. [Google Scholar] [CrossRef] [PubMed]
  7. Nomura, S.; Yamamoto, Y.; Matsumura, Y.; Ohba, K.; Sakamaki, S.; Kimata, H.; Nakayama, K.; Kuriyama, C.; Matsushita, Y.; Ueta, K.; et al. Novel Indole-N-glucoside, TA-1887 as a sodium glucose Cotransporter 2 inhibitor for treatment of type 2 diabetes. ACS Med. Chem. Lett. 2014, 5, 51–55. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  8. Gomha, S.M.; Riyadh, S.M. Synthesis under microwave irradiation of [1,2,4]triazolo[3,4-b][1,3,4]thiadiazoles and other diazoles bearing indole moieties and their antimicrobial evaluation. Molecules 2011, 16, 8244–8256. [Google Scholar] [CrossRef] [PubMed]
  9. Brancale, A.; Silvestri, R. Indole, a core nucleus for potent inhibitors of tubulin polymerization. Med. Res. Rev. 2007, 27, 209–238. [Google Scholar] [CrossRef] [PubMed]
  10. Taylor, R.D.; MacCoss, M.; Lawson, A.D.G. Rings in Drugs. J. Med. Chem. 2014, 57, 5845–5859. [Google Scholar] [CrossRef] [PubMed]
  11. Mykhailiuk, P.K. Fluorinated Pyrazoles: From Synthesis to Applications. Chem. Rev. 2021, 121, 1670–1715. [Google Scholar] [CrossRef]
  12. Pavlovska, T.L.; Redkin, R.G.; Lipson, V.V.; Atamanuk, D.V. Molecular diversity of spirooxindoles. Synthesis and biological activity. Mol. Divers. 2016, 20, 299–344. [Google Scholar] [CrossRef]
  13. Yu, B.; Yu, D.Q.; Liu, H.M. Spirooxindoles: Promising scaffolds for anticancer agents. Eur. J. Med. Chem. 2015, 97, 673–698. [Google Scholar] [CrossRef]
  14. Sansinenea, E.; Martínez, E.F.; Ortiz, A. Organocatalytic Synthesis of Chiral Spirooxindoles with Quaternary Stereogenic Centers. Eur. J. Org. Chem. 2020, 2020, 5101–5118. [Google Scholar] [CrossRef]
  15. Elinson, M.N.; Ryzhkov, F.V.; Korolev, V.A.; Egorov, M.P. Pot, atom and step-economic (PASE) synthesis of medicinally relevant spiro[oxindole-3,4′-pyrano[4,3-b]pyran] scaffold. Heterocycl. Commun. 2016, 22, 11–15. [Google Scholar] [CrossRef]
  16. Elinson, M.N.; Ryzhkov, F.V.; Vereshchagin, A.N.; Zaimovskaya, T.A.; Egorov, M.P. Solvent-free multicomponent assembling of isatins, malononitrile, and dimedone: Fast and efficient way to functionalized spirooxindole system. Monatsh Chem. 2016, 147, 755–760. [Google Scholar] [CrossRef]
  17. Elinson, M.N.; Ryzhkov, F.V.; Zaimovskaya, T.A.; Korolev, V.A.; Egorov, M.P. Multicomponent assembling of isatins, malononitrile and 4-hydroxy-6-methylpyridin-2(1H)-ones: One-pot efficient approach to privileged spiro[indoline-3,4′-pyrano[3,2-c]pyridine]-2,5′(6′H)-dione scaffold. Mendeleev Commun. 2016, 26, 399–401. [Google Scholar] [CrossRef]
  18. Elinson, M.N.; Vereshchagin, A.N.; Ryzhkov, F.V.; Anisina, Y.E. Solvent-free and on-solvent multicomponent reaction of isatins, malononitrile, and bicyclic CH-acids: Fast and efficient way to medicinal privileged spirooxindole scaffold. Arkivoc 2018, 4, 276–285. [Google Scholar] [CrossRef] [Green Version]
  19. Liu, X.; Xu, X.; Wang, X.; Yang, W.; Qian, Q.; Zhang, M.; Song, L.; Deng, H.; Shao, M. A facile and convenient way to functionalized trifluoromethylated spirocyclic[indole-3,4-pyrano[2,3-c]pyrazole] derivatives. Tetrahedron Lett. 2013, 54, 4451–4455. [Google Scholar] [CrossRef]
  20. Schwertz, G.; Witschel, M.C.; Rottmann, M.; Leartsakulpanich, U.; Chitnumsub, P.; Jaruwat, A.; Amornwatcharapong, W.; Ittarat, W.; Schäfer, A.; Aponte, R.A.; et al. Potent Inhibitors of Plasmodial Serine Hydroxymethyltransferase (SHMT) Featuring a Spirocyclic Scaffold. ChemMedChem 2018, 13, 931–943. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  21. Patai, S.; Israeli, Y. 411. The kinetics and mechanisms of carbonyl–methylene condensations. Part VII. The reaction of malononitrile with aromatic aldehydes in ethanol. J. Chem. Soc. 1960, 2025–2030. [Google Scholar] [CrossRef]
  22. Santos, I.S.; Guerra, F.S.; Bernardino, L.F.; Fernandes, P.D.; Hamerski, L.; Silva, B.V. A Facile Synthesis of Novel Isatinspirooxazine Derivatives and Potential in vitro Anti-Proliferative Activity. J. Braz. Chem. Soc. 2019, 30, 198–209. [Google Scholar] [CrossRef]
  23. Bingi, C.; Emmadi, N.R.; Chennapuram, M.; Nanubolu, J.B.; Atmakur, K. A simple and catalyst free one pot access to the pyrazolone fused 2,8-dioxabicyclo[3.3.1]nonanes. RSC Adv. 2014, 4, 35009–35016. [Google Scholar] [CrossRef]
Scheme 1. Reaction of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3.
Scheme 1. Reaction of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3.
Molbank 2022 m1309 sch001
Scheme 2. Tautomerization of spiro[indole-3,4′-pyrano[2,3-c]pyrazole] 4.
Scheme 2. Tautomerization of spiro[indole-3,4′-pyrano[2,3-c]pyrazole] 4.
Molbank 2022 m1309 sch002
Scheme 3. Mechanism of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 transformation into spiro[indole-3,4′-pyrano[2,3-c]pyrazole] 4.
Scheme 3. Mechanism of 5,7-dibromoisatin 1, malononitrile 2, and 5-(trifluoromethyl)-2,4-dihydro-3H-pyrazol-3-one 3 transformation into spiro[indole-3,4′-pyrano[2,3-c]pyrazole] 4.
Molbank 2022 m1309 sch003
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Ryzhkova, Y.E.; Kalashnikova, V.M.; Elinson, M.N. 6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile. Molbank 2022, 2022, M1309. https://doi.org/10.3390/M1309

AMA Style

Ryzhkova YE, Kalashnikova VM, Elinson MN. 6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile. Molbank. 2022; 2022(1):M1309. https://doi.org/10.3390/M1309

Chicago/Turabian Style

Ryzhkova, Yuliya E., Varvara M. Kalashnikova, and Michail N. Elinson. 2022. "6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile" Molbank 2022, no. 1: M1309. https://doi.org/10.3390/M1309

APA Style

Ryzhkova, Y. E., Kalashnikova, V. M., & Elinson, M. N. (2022). 6′-Amino-5,7-dibromo-2-oxo-3′-(trifluoromethyl)-1′H-spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-5′-carbonitrile. Molbank, 2022(1), M1309. https://doi.org/10.3390/M1309

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop