Next Article in Journal
Enhanced Preservative Performance of Pine Wood through Nano-Xylan Treatment Assisted by High-Temperature Steam and Vacuum Impregnation
Next Article in Special Issue
Microstructural Evolution, Mechanical Properties and Tribological Behavior of B4C-Reinforced Ti In Situ Composites Produced by Laser Powder Bed Fusion
Previous Article in Journal
Effective Properties of Homogenised Nonlinear Viscoelastic Composites
Previous Article in Special Issue
The Effects of Co on the Microstructure and Mechanical Properties of Ni-Based Superalloys Prepared via Selective Laser Melting
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 16
Issue 11
10.3390/ma16113975
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Recent Advances in Metal Powder-Based Additive Manufacturing

by
Hong Wu
1,*,
Yaojia Ren
1,
Yingtao Tian
2 and
Alberto Orozco Caballero
3
1
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
2
Department of Engineering, Lancaster University, Lancaster LA1 4YW, UK
3
Department of Mechanical Engineering, Chemistry and Industrial Design, Universidad Politécnica de Madrid, Ronda de Valencia, 3, 28012 Madrid, Spain
*
Author to whom correspondence should be addressed.
Materials 2023, 16(11), 3975; https://doi.org/10.3390/ma16113975
Submission received: 6 January 2023 / Accepted: 21 January 2023 / Published: 26 May 2023
(This article belongs to the Special Issue Recent Advances in Metal Powder Based Additive Manufacturing)
Versions Notes
Over the past two decades, laser additive manufacturing technology has evolved rapidly and has been applied in many industrial sectors. However, traditional manufacturing methods such as casting, forging, rolling, and welding are still prevalent around the world [1]. To meet the demand for lightweight and personalized applications in aerospace and biomedical fields, the use of laser powder bed fusion (LPBF) is proliferating and is expected to maintain a high growth rate in the next ten years.
Significant technical advances have been made in the field of metal powder-based additive manufacturing, and a range of high-performance materials have been successfully developed [2,3]. However, the poor printability and unacceptable metallurgical defects are still the primary concerns that limit the adoption of most alloys in the laser-powder bed-fusion process [4]. Therefore, it is essential to re-design the alloy compositions and make them suitable for LPBF which requires a comprehensive understanding of the impact of complex thermal cycles to the microstructure and properties of the materials. In addition, LPBF offers a superior work-hardening effect to the materials, which gives them a chance to overcome the classical strength-ductility trade-off [5]. This also includes the potential effects and consequences of post-treatment on the microstructure and properties. High internal stresses in as-built specimens are inevitable due to the extremely high cooling rates. This may lead to premature material failure when long service periods are required. Furthermore, understanding the hierarchical heterostructure evolution and the corresponding property changes during post-treatment is of great significance for the development of high-strength materials.
The current Special Issue entitled “Recent Advances in Metal Powder-Based Additive Manufacturing” collects the recent research outcomes addressing the main challenges and aiming to provide possible solutions that may revolutionize the metal powder-based additive manufacturing technology and its applications. It is believed that this Special Issue will provide an innovation platform for researchers in this area to communicate and disseminate their most recent ideas and achievements which will facilitate and support scientists and engineers to continuously make contributions to the field.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Abd-Elaziem, W.; Elkatatny, S.; Abd-Elaziem, A.-E.; Khedr, M.; El-Baky, M.A.A.; Hassan, M.A.; Abu-Okail, M.; Mohammed, M.; Järvenpää, A.; Allam, T.; et al. On the current research progress of metallic materials fabricated by laser powder bed fusion process: A review. J. Mater. Res. Technol. 2022, 20, 681–707. [Google Scholar] [CrossRef]
  2. Wu, H.; Ren, Y.; Ren, J.; Liang, L.; Li, R.; Fang, Q.; Cai, A.; Shan, Q.; Tian, Y.; Baker, I. Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties. J. Alloy. Compd. 2021, 873, 159823. [Google Scholar] [CrossRef]
  3. Ren, J.; Zhang, Y.; Zhao, D.; Chen, Y.; Guan, S.; Liu, Y.; Liu, L.; Peng, S.; Kong, F.; Poplawsky, J.D.; et al. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing. Nature 2022, 608, 62–68. [Google Scholar] [CrossRef] [PubMed]
  4. Wang, H.; Chen, L.; Dovgyy, B.; Xu, W.; Sha, A.; Li, X.; Tang, H.; Liu, Y.; Wu, H.; Pham, M.-S. Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed. Addit. Manuf. 2021, 873, 101853. [Google Scholar] [CrossRef]
  5. Wang, Y.M.; Voisin, T.; McKeown, J.T.; Ye, J.; Calta, N.P.; Li, Z.; Zeng, Z.; Zhang, Y.; Chen, W.; Roehling, T.T.; et al. Additively manufactured hierarchical stainless steels with high strength and ductility. Nat. Mater. 2018, 17, 63–71. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Wu, H.; Ren, Y.; Tian, Y.; Caballero, A.O. Recent Advances in Metal Powder-Based Additive Manufacturing. Materials 2023, 16, 3975. https://doi.org/10.3390/ma16113975

AMA Style

Wu H, Ren Y, Tian Y, Caballero AO. Recent Advances in Metal Powder-Based Additive Manufacturing. Materials. 2023; 16(11):3975. https://doi.org/10.3390/ma16113975

Chicago/Turabian Style

Wu, Hong, Yaojia Ren, Yingtao Tian, and Alberto Orozco Caballero. 2023. "Recent Advances in Metal Powder-Based Additive Manufacturing" Materials 16, no. 11: 3975. https://doi.org/10.3390/ma16113975

APA Style

Wu, H., Ren, Y., Tian, Y., & Caballero, A. O. (2023). Recent Advances in Metal Powder-Based Additive Manufacturing. Materials, 16(11), 3975. https://doi.org/10.3390/ma16113975

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop